This patch removes the Hades support that was marked as BROKEN 5 years ago.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
this kernel on an Atari, say Y here and browse the material
available in <file:Documentation/m68k>; otherwise say N.
-config HADES
- bool "Hades support"
- depends on ATARI && BROKEN
- help
- This option enables support for the Hades Atari clone. If you plan
- to use this kernel on a Hades, say Y here; otherwise say N.
-
config PCI
bool
- depends on HADES
- default y
help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
config MAC
bool "Macintosh support"
obj-y := config.o time.o debug.o ataints.o stdma.o \
atasound.o stram.o
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_HADES) += hades-pci.o
-endif
obj-$(CONFIG_ATARI_KBD_CORE) += atakeyb.o
* gets overruns)
*/
- if (!MACH_IS_HADES) {
- vectors[VEC_INT2] = falcon_hblhandler;
- vectors[VEC_INT4] = falcon_hblhandler;
- }
+ vectors[VEC_INT2] = falcon_hblhandler;
+ vectors[VEC_INT4] = falcon_hblhandler;
}
if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
*/
printk("Atari hardware found: ");
- if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+ if (MACH_IS_MEDUSA) {
/* There's no Atari video hardware on the Medusa, but all the
* addresses below generate a DTACK so no bus error occurs! */
} else if (hwreg_present(f030_xreg)) {
ATARIHW_SET(SCSI_DMA);
printk("TT_SCSI_DMA ");
}
- if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
- ATARIHW_SET(STND_DMA);
- printk("STND_DMA ");
- }
/*
* The ST-DMA address registers aren't readable
* on all Medusas, so the test below may fail
ATARIHW_SET(YM_2149);
printk("YM2149 ");
}
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&tt_dmasnd.ctrl)) {
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
ATARIHW_SET(PCM_8BIT);
printk("PCM ");
}
- if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+ if (hwreg_present(&falcon_codec.unused5)) {
ATARIHW_SET(CODEC);
printk("CODEC ");
}
(tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
(tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
#else
- !MACH_IS_MEDUSA && !MACH_IS_HADES
+ !MACH_IS_MEDUSA
#endif
) {
ATARIHW_SET(SCC_DMA);
ATARIHW_SET(ST_ESCC);
printk("ST_ESCC ");
}
- if (MACH_IS_HADES) {
- ATARIHW_SET(VME);
- printk("VME ");
- } else if (hwreg_present(&tt_scu.sys_mask)) {
+ if (hwreg_present(&tt_scu.sys_mask)) {
ATARIHW_SET(SCU);
/* Assume a VME bus if there's a SCU */
ATARIHW_SET(VME);
ATARIHW_SET(ANALOG_JOY);
printk("ANALOG_JOY ");
}
- if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+ if (hwreg_present(blitter.halftone)) {
ATARIHW_SET(BLITTER);
printk("BLITTER ");
}
printk("IDE ");
}
#if 1 /* This maybe wrong */
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&tt_microwire.data) &&
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
hwreg_present(&tt_microwire.mask) &&
(tt_microwire.mask = 0x7ff,
udelay(1),
mach_hwclk = atari_tt_hwclk;
mach_set_clock_mmss = atari_tt_set_clock_mmss;
}
- if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+ if (hwreg_present(&mste_rtc.sec_ones)) {
ATARIHW_SET(MSTE_CLK);
printk("MSTE_CLK ");
mach_hwclk = atari_mste_hwclk;
mach_set_clock_mmss = atari_mste_set_clock_mmss;
}
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&dma_wd.fdc_speed) &&
+ if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
hwreg_write(&dma_wd.fdc_speed, 0)) {
ATARIHW_SET(FDCSPEED);
printk("FDC_SPEED ");
}
- if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+ if (!ATARIHW_PRESENT(ST_SCSI)) {
ATARIHW_SET(ACSI);
printk("ACSI ");
}
* 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
* in the last 16MB of the address space.
*/
- tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+ tos_version = (MACH_IS_MEDUSA) ?
0xfff : *(unsigned short *)0xff000002;
atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
}
* On the Medusa, phys. 0x4 may contain garbage because it's no
* ROM. See above for explanation why we cannot use PTOV(4).
*/
- reset_addr = MACH_IS_HADES ? 0x7fe00030 :
- MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+ reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
*(unsigned long *) 0xff000004;
/* reset ACIA for switch off OverScan, if it's active */
if (MACH_IS_MEDUSA)
/* Medusa has TT _MCH cookie */
strcat(model, "Medusa");
- else if (MACH_IS_HADES)
- strcat(model, "Hades");
else
strcat(model, "TT");
break;
+++ /dev/null
-/*
- * hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
- *
- * Written by Wout Klaren.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#if 0
-# define DBG_DEVS(args) printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
-
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/byteorder.h>
-#include <asm/pci.h>
-
-#define HADES_MEM_BASE 0x80000000
-#define HADES_MEM_SIZE 0x20000000
-#define HADES_CONFIG_BASE 0xA0000000
-#define HADES_CONFIG_SIZE 0x10000000
-#define HADES_IO_BASE 0xB0000000
-#define HADES_IO_SIZE 0x10000000
-#define HADES_VIRT_IO_SIZE 0x00010000 /* Only 64k is remapped and actually used. */
-
-#define N_SLOTS 4 /* Number of PCI slots. */
-
-static const char pci_mem_name[] = "PCI memory space";
-static const char pci_io_name[] = "PCI I/O space";
-static const char pci_config_name[] = "PCI config space";
-
-static struct resource config_space = {
- .name = pci_config_name,
- .start = HADES_CONFIG_BASE,
- .end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
-};
-static struct resource io_space = {
- .name = pci_io_name,
- .start = HADES_IO_BASE,
- .end = HADES_IO_BASE + HADES_IO_SIZE - 1
-};
-
-static const unsigned long pci_conf_base_phys[] = {
- 0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
-};
-static unsigned long pci_conf_base_virt[N_SLOTS];
-static unsigned long pci_io_base_virt;
-
-/*
- * static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
- * unsigned char where)
- *
- * Calculate the address of the PCI configuration area of the given
- * device.
- *
- * BUG: boards with multiple functions are probably not correctly
- * supported.
- */
-
-static void *mk_conf_addr(struct pci_dev *dev, int where)
-{
- int device = dev->devfn >> 3, function = dev->devfn & 7;
- void *result;
-
- DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
- dev->bus->number, dev->devfn, where, pci_addr));
-
- if (device > 3)
- {
- DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
- return NULL;
- }
-
- if (dev->bus->number != 0)
- {
- DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
- return NULL;
- }
-
- result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
- DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
- return result;
-}
-
-static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
- volatile unsigned char *pci_addr;
-
- *value = 0xff;
-
- if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = *pci_addr;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
- volatile unsigned short *pci_addr;
-
- *value = 0xffff;
-
- if (where & 0x1)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = le16_to_cpu(*pci_addr);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
- volatile unsigned int *pci_addr;
- unsigned char header_type;
- int result;
-
- *value = 0xffffffff;
-
- if (where & 0x3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = le32_to_cpu(*pci_addr);
-
- /*
- * Check if the value is an address on the bus. If true, add the
- * base address of the PCI memory or PCI I/O area on the Hades.
- */
-
- if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
- &header_type)) != PCIBIOS_SUCCESSFUL)
- return result;
-
- if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
- ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
- (where <= PCI_BASE_ADDRESS_5))))
- {
- if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
- {
- /*
- * Base address register that contains an I/O address. If the
- * address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
- * add 'pci_io_base_virt' to the value.
- */
-
- if (*value < HADES_VIRT_IO_SIZE)
- *value += pci_io_base_virt;
- }
- else
- {
- /*
- * Base address register that contains an memory address. If the
- * address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
- * add HADES_MEM_BASE to the value.
- */
-
- if (*value == 0)
- {
- /*
- * Base address is 0. Test if this base
- * address register is used.
- */
-
- *pci_addr = 0xffffffff;
- if (*pci_addr != 0)
- {
- *pci_addr = *value;
- if (*value < HADES_MEM_SIZE)
- *value += HADES_MEM_BASE;
- }
- }
- else
- {
- if (*value < HADES_MEM_SIZE)
- *value += HADES_MEM_BASE;
- }
- }
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
- volatile unsigned char *pci_addr;
-
- if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *pci_addr = value;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
- volatile unsigned short *pci_addr;
-
- if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *pci_addr = cpu_to_le16(value);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
- volatile unsigned int *pci_addr;
- unsigned char header_type;
- int result;
-
- if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * Check if the value is an address on the bus. If true, subtract the
- * base address of the PCI memory or PCI I/O area on the Hades.
- */
-
- if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
- &header_type)) != PCIBIOS_SUCCESSFUL)
- return result;
-
- if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
- ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
- (where <= PCI_BASE_ADDRESS_5))))
- {
- if ((value & PCI_BASE_ADDRESS_SPACE) ==
- PCI_BASE_ADDRESS_SPACE_IO)
- {
- /*
- * I/O address. Check if the address is valid address on
- * the Hades (pci_io_base_virt <= value < pci_io_base_virt +
- * HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
- * true do not write the base address register. If it is a
- * valid base address subtract 'pci_io_base_virt' from the value.
- */
-
- if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
- HADES_VIRT_IO_SIZE)))
- value -= pci_io_base_virt;
- else
- {
- if (value != 0xffffffff)
- return PCIBIOS_SET_FAILED;
- }
- }
- else
- {
- /*
- * Memory address. Check if the address is valid address on
- * the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
- * if the value is 0xffffffff. If not true do not write
- * the base address register. If it is a valid base address
- * subtract HADES_MEM_BASE from the value.
- */
-
- if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
- value -= HADES_MEM_BASE;
- else
- {
- if (value != 0xffffffff)
- return PCIBIOS_SET_FAILED;
- }
- }
- }
-
- *pci_addr = cpu_to_le32(value);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * static inline void hades_fixup(void)
- *
- * Assign IRQ numbers as used by Linux to the interrupt pins
- * of the PCI cards.
- */
-
-static void __init hades_fixup(int pci_modify)
-{
- char irq_tab[4] = {
- [0] = IRQ_TT_MFP_IO0, /* Slot 0. */
- [1] = IRQ_TT_MFP_IO1, /* Slot 1. */
- [2] = IRQ_TT_MFP_SCC, /* Slot 2. */
- [3] = IRQ_TT_MFP_SCSIDMA /* Slot 3. */
- };
- struct pci_dev *dev = NULL;
- unsigned char slot;
-
- /*
- * Go through all devices, fixing up irqs as we see fit:
- */
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
- {
- if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
- {
- slot = PCI_SLOT(dev->devfn); /* Determine slot number. */
- dev->irq = irq_tab[slot];
- if (pci_modify)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
- }
-}
-
-/*
- * static void hades_conf_device(struct pci_dev *dev)
- *
- * Machine dependent Configure the given device.
- *
- * Parameters:
- *
- * dev - the pci device.
- */
-
-static void __init hades_conf_device(struct pci_dev *dev)
-{
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-}
-
-static struct pci_ops hades_pci_ops = {
- .read_byte = hades_read_config_byte,
- .read_word = hades_read_config_word,
- .read_dword = hades_read_config_dword,
- .write_byte = hades_write_config_byte,
- .write_word = hades_write_config_word,
- .write_dword = hades_write_config_dword
-};
-
-/*
- * struct pci_bus_info *init_hades_pci(void)
- *
- * Machine specific initialisation:
- *
- * - Allocate and initialise a 'pci_bus_info' structure
- * - Initialise hardware
- *
- * Result: pointer to 'pci_bus_info' structure.
- */
-
-struct pci_bus_info * __init init_hades_pci(void)
-{
- struct pci_bus_info *bus;
- int i;
-
- /*
- * Remap I/O and configuration space.
- */
-
- pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
-
- for (i = 0; i < N_SLOTS; i++)
- pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
-
- /*
- * Allocate memory for bus info structure.
- */
-
- bus = kzalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
- if (unlikely(!bus))
- goto iounmap_base_virt;
-
- /*
- * Claim resources. The m68k has no separate I/O space, both
- * PCI memory space and PCI I/O space are in memory space. Therefore
- * the I/O resources are requested in memory space as well.
- */
-
- if (unlikely(request_resource(&iomem_resource, &config_space) != 0))
- goto free_bus;
-
- if (unlikely(request_resource(&iomem_resource, &io_space) != 0))
- goto release_config_space;
-
- bus->mem_space.start = HADES_MEM_BASE;
- bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
- bus->mem_space.name = pci_mem_name;
-#if 1
- if (unlikely(request_resource(&iomem_resource, &bus->mem_space) != 0))
- goto release_io_space;
-#endif
- bus->io_space.start = pci_io_base_virt;
- bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
- bus->io_space.name = pci_io_name;
-#if 1
- if (unlikely(request_resource(&ioport_resource, &bus->io_space) != 0))
- goto release_bus_mem_space;
-#endif
- /*
- * Set hardware dependent functions.
- */
-
- bus->m68k_pci_ops = &hades_pci_ops;
- bus->fixup = hades_fixup;
- bus->conf_device = hades_conf_device;
-
- /*
- * Select high to low edge for PCI interrupts.
- */
-
- tt_mfp.active_edge &= ~0x27;
-
- return bus;
-
-release_bus_mem_space:
- release_resource(&bus->mem_space);
-release_io_space:
- release_resource(&io_space);
-release_config_space:
- release_resource(&config_space);
-free_bus:
- kfree(bus);
-iounmap_base_virt:
- iounmap((void *)pci_io_base_virt);
-
- for (i = 0; i < N_SLOTS; i++)
- iounmap((void *)pci_conf_base_virt[i]);
-
- return NULL;
-}
-#endif
printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
bus_info = NULL;
-#ifdef CONFIG_HADES
+
+/* Hades code was:
if (MACH_IS_HADES)
bus_info = init_hades_pci();
-#endif
+*/
+
if (bus_info != NULL)
{
printk("PCI: Probing PCI hardware\n");
static void default_idle(void)
{
if (!need_resched())
-#if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES)
+#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
/* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
return -ENODEV;
- if (MACH_IS_HADES)
- /* Hades doesn't have Atari-compatible floppy */
- return -ENODEV;
-
if (register_blkdev(FLOPPY_MAJOR,"fd"))
return -EBUSY;
boot process fractionally longer but may assist recovery from errors
that leave the devices with SCSI operations partway completed.
-config TT_DMA_EMUL
- bool "Hades SCSI DMA emulator"
- depends on ATARI_SCSI && HADES
- help
- This option enables code which emulates the TT SCSI DMA chip on the
- Hades. This increases the SCSI transfer rates at least ten times
- compared to PIO transfers.
-
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
+++ /dev/null
-/*
- * atari_dma_emul.c -- TT SCSI DMA emulator for the Hades.
- *
- * Copyright 1997 Wout Klaren <W.Klaren@inter.nl.net>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- * This code was written using the Hades TOS source code as a
- * reference. This source code can be found on the home page
- * of Medusa Computer Systems.
- *
- * Version 0.1, 1997-09-24.
- *
- * This code should be considered experimental. It has only been
- * tested on a Hades with a 68060. It might not work on a Hades
- * with a 68040. Make backups of your hard drives before using
- * this code.
- */
-
-#include <linux/compiler.h>
-#include <asm/thread_info.h>
-#include <asm/uaccess.h>
-
-#define hades_dma_ctrl (*(unsigned char *) 0xffff8717)
-#define hades_psdm_reg (*(unsigned char *) 0xffff8741)
-
-#define TRANSFER_SIZE 16
-
-struct m68040_frame {
- unsigned long effaddr; /* effective address */
- unsigned short ssw; /* special status word */
- unsigned short wb3s; /* write back 3 status */
- unsigned short wb2s; /* write back 2 status */
- unsigned short wb1s; /* write back 1 status */
- unsigned long faddr; /* fault address */
- unsigned long wb3a; /* write back 3 address */
- unsigned long wb3d; /* write back 3 data */
- unsigned long wb2a; /* write back 2 address */
- unsigned long wb2d; /* write back 2 data */
- unsigned long wb1a; /* write back 1 address */
- unsigned long wb1dpd0; /* write back 1 data/push data 0*/
- unsigned long pd1; /* push data 1*/
- unsigned long pd2; /* push data 2*/
- unsigned long pd3; /* push data 3*/
-};
-
-static void writeback (unsigned short wbs, unsigned long wba,
- unsigned long wbd, void *old_buserr)
-{
- mm_segment_t fs = get_fs();
- static void *save_buserr;
-
- __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t"
- "move.l %0,8(%%a0)\n\t"
- :
- : "r" (&&bus_error)
- : "a0" );
-
- save_buserr = old_buserr;
-
- set_fs (MAKE_MM_SEG(wbs & WBTM_040));
-
- switch (wbs & WBSIZ_040) {
- case BA_SIZE_BYTE:
- put_user (wbd & 0xff, (char *)wba);
- break;
- case BA_SIZE_WORD:
- put_user (wbd & 0xffff, (short *)wba);
- break;
- case BA_SIZE_LONG:
- put_user (wbd, (int *)wba);
- break;
- }
-
- set_fs (fs);
- return;
-
-bus_error:
- __asm__ __volatile__ ("cmp.l %0,2(%%sp)\n\t"
- "bcs.s .jump_old\n\t"
- "cmp.l %1,2(%%sp)\n\t"
- "bls.s .restore_old\n"
- ".jump_old:\n\t"
- "move.l %2,-(%%sp)\n\t"
- "rts\n"
- ".restore_old:\n\t"
- "move.l %%a0,-(%%sp)\n\t"
- "movec.l %%vbr,%%a0\n\t"
- "move.l %2,8(%%a0)\n\t"
- "move.l (%%sp)+,%%a0\n\t"
- "rte\n\t"
- :
- : "i" (writeback), "i" (&&bus_error),
- "m" (save_buserr) );
-}
-
-/*
- * static inline void set_restdata_reg(unsigned char *cur_addr)
- *
- * Set the rest data register if necessary.
- */
-
-static inline void set_restdata_reg(unsigned char *cur_addr)
-{
- if (((long) cur_addr & ~3) != 0)
- tt_scsi_dma.dma_restdata =
- *((unsigned long *) ((long) cur_addr & ~3));
-}
-
-/*
- * void hades_dma_emulator(int irq, void *dummy)
- *
- * This code emulates TT SCSI DMA on the Hades.
- *
- * Note the following:
- *
- * 1. When there is no byte available to read from the SCSI bus, or
- * when a byte cannot yet bet written to the SCSI bus, a bus
- * error occurs when reading or writing the pseudo DMA data
- * register (hades_psdm_reg). We have to catch this bus error
- * and try again to read or write the byte. If after several tries
- * we still get a bus error, the interrupt handler is left. When
- * the byte can be read or written, the interrupt handler is
- * called again.
- *
- * 2. The SCSI interrupt must be disabled in this interrupt handler.
- *
- * 3. If we set the EOP signal, the SCSI controller still expects one
- * byte to be read or written. Therefore the last byte is transferred
- * separately, after setting the EOP signal.
- *
- * 4. When this function is left, the address pointer (start_addr) is
- * converted to a physical address. Because it points one byte
- * further than the last transferred byte, it can point outside the
- * current page. If virt_to_phys() is called with this address we
- * might get an access error. Therefore virt_to_phys() is called with
- * start_addr - 1 if the count has reached zero. The result is
- * increased with one.
- */
-
-static irqreturn_t hades_dma_emulator(int irq, void *dummy)
-{
- unsigned long dma_base;
- register unsigned long dma_cnt asm ("d3");
- static long save_buserr;
- register unsigned long save_sp asm ("d4");
- register int tries asm ("d5");
- register unsigned char *start_addr asm ("a3"), *end_addr asm ("a4");
- register unsigned char *eff_addr;
- register unsigned char *psdm_reg;
- unsigned long rem;
-
- atari_disable_irq(IRQ_TT_MFP_SCSI);
-
- /*
- * Read the dma address and count registers.
- */
-
- dma_base = SCSI_DMA_READ_P(dma_addr);
- dma_cnt = SCSI_DMA_READ_P(dma_cnt);
-
- /*
- * Check if DMA is still enabled.
- */
-
- if ((tt_scsi_dma.dma_ctrl & 2) == 0)
- {
- atari_enable_irq(IRQ_TT_MFP_SCSI);
- return IRQ_HANDLED;
- }
-
- if (dma_cnt == 0)
- {
- printk(KERN_NOTICE "DMA emulation: count is zero.\n");
- tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */
- atari_enable_irq(IRQ_TT_MFP_SCSI);
- return IRQ_HANDLED;
- }
-
- /*
- * Install new bus error routine.
- */
-
- __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t"
- "move.l 8(%%a0),%0\n\t"
- "move.l %1,8(%%a0)\n\t"
- : "=&r" (save_buserr)
- : "r" (&&scsi_bus_error)
- : "a0" );
-
- hades_dma_ctrl &= 0xfc; /* Bus error and EOP off. */
-
- /*
- * Save the stack pointer.
- */
-
- __asm__ __volatile__ ("move.l %%sp,%0\n\t"
- : "=&r" (save_sp) );
-
- tries = 100; /* Maximum number of bus errors. */
- start_addr = phys_to_virt(dma_base);
- end_addr = start_addr + dma_cnt;
-
-scsi_loop:
- dma_cnt--;
- rem = dma_cnt & (TRANSFER_SIZE - 1);
- dma_cnt &= ~(TRANSFER_SIZE - 1);
- psdm_reg = &hades_psdm_reg;
-
- if (tt_scsi_dma.dma_ctrl & 1) /* Read or write? */
- {
- /*
- * SCSI write. Abort when count is zero.
- */
-
- switch (rem)
- {
- case 0:
- while (dma_cnt > 0)
- {
- dma_cnt -= TRANSFER_SIZE;
-
- *psdm_reg = *start_addr++;
- case 15:
- *psdm_reg = *start_addr++;
- case 14:
- *psdm_reg = *start_addr++;
- case 13:
- *psdm_reg = *start_addr++;
- case 12:
- *psdm_reg = *start_addr++;
- case 11:
- *psdm_reg = *start_addr++;
- case 10:
- *psdm_reg = *start_addr++;
- case 9:
- *psdm_reg = *start_addr++;
- case 8:
- *psdm_reg = *start_addr++;
- case 7:
- *psdm_reg = *start_addr++;
- case 6:
- *psdm_reg = *start_addr++;
- case 5:
- *psdm_reg = *start_addr++;
- case 4:
- *psdm_reg = *start_addr++;
- case 3:
- *psdm_reg = *start_addr++;
- case 2:
- *psdm_reg = *start_addr++;
- case 1:
- *psdm_reg = *start_addr++;
- }
- }
-
- hades_dma_ctrl |= 1; /* Set EOP. */
- udelay(10);
- *psdm_reg = *start_addr++; /* Dummy byte. */
- tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */
- }
- else
- {
- /*
- * SCSI read. Abort when count is zero.
- */
-
- switch (rem)
- {
- case 0:
- while (dma_cnt > 0)
- {
- dma_cnt -= TRANSFER_SIZE;
-
- *start_addr++ = *psdm_reg;
- case 15:
- *start_addr++ = *psdm_reg;
- case 14:
- *start_addr++ = *psdm_reg;
- case 13:
- *start_addr++ = *psdm_reg;
- case 12:
- *start_addr++ = *psdm_reg;
- case 11:
- *start_addr++ = *psdm_reg;
- case 10:
- *start_addr++ = *psdm_reg;
- case 9:
- *start_addr++ = *psdm_reg;
- case 8:
- *start_addr++ = *psdm_reg;
- case 7:
- *start_addr++ = *psdm_reg;
- case 6:
- *start_addr++ = *psdm_reg;
- case 5:
- *start_addr++ = *psdm_reg;
- case 4:
- *start_addr++ = *psdm_reg;
- case 3:
- *start_addr++ = *psdm_reg;
- case 2:
- *start_addr++ = *psdm_reg;
- case 1:
- *start_addr++ = *psdm_reg;
- }
- }
-
- hades_dma_ctrl |= 1; /* Set EOP. */
- udelay(10);
- *start_addr++ = *psdm_reg;
- tt_scsi_dma.dma_ctrl &= 0xfd; /* DMA ready. */
-
- set_restdata_reg(start_addr);
- }
-
- if (start_addr != end_addr)
- printk(KERN_CRIT "DMA emulation: FATAL: Count is not zero at end of transfer.\n");
-
- dma_cnt = end_addr - start_addr;
-
-scsi_end:
- dma_base = (dma_cnt == 0) ? virt_to_phys(start_addr - 1) + 1 :
- virt_to_phys(start_addr);
-
- SCSI_DMA_WRITE_P(dma_addr, dma_base);
- SCSI_DMA_WRITE_P(dma_cnt, dma_cnt);
-
- /*
- * Restore old bus error routine.
- */
-
- __asm__ __volatile__ ("movec.l %%vbr,%%a0\n\t"
- "move.l %0,8(%%a0)\n\t"
- :
- : "r" (save_buserr)
- : "a0" );
-
- atari_enable_irq(IRQ_TT_MFP_SCSI);
-
- return IRQ_HANDLED;
-
-scsi_bus_error:
- /*
- * First check if the bus error is caused by our code.
- * If not, call the original handler.
- */
-
- __asm__ __volatile__ ("cmp.l %0,2(%%sp)\n\t"
- "bcs.s .old_vector\n\t"
- "cmp.l %1,2(%%sp)\n\t"
- "bls.s .scsi_buserr\n"
- ".old_vector:\n\t"
- "move.l %2,-(%%sp)\n\t"
- "rts\n"
- ".scsi_buserr:\n\t"
- :
- : "i" (&&scsi_loop), "i" (&&scsi_end),
- "m" (save_buserr) );
-
- if (CPU_IS_060)
- {
- /*
- * Get effective address and restore the stack.
- */
-
- __asm__ __volatile__ ("move.l 8(%%sp),%0\n\t"
- "move.l %1,%%sp\n\t"
- : "=a&" (eff_addr)
- : "r" (save_sp) );
- }
- else
- {
- register struct m68040_frame *frame;
-
- __asm__ __volatile__ ("lea 8(%%sp),%0\n\t"
- : "=a&" (frame) );
-
- if (tt_scsi_dma.dma_ctrl & 1)
- {
- /*
- * Bus error while writing.
- */
-
- if (frame->wb3s & WBV_040)
- {
- if (frame->wb3a == (long) &hades_psdm_reg)
- start_addr--;
- else
- writeback(frame->wb3s, frame->wb3a,
- frame->wb3d, &&scsi_bus_error);
- }
-
- if (frame->wb2s & WBV_040)
- {
- if (frame->wb2a == (long) &hades_psdm_reg)
- start_addr--;
- else
- writeback(frame->wb2s, frame->wb2a,
- frame->wb2d, &&scsi_bus_error);
- }
-
- if (frame->wb1s & WBV_040)
- {
- if (frame->wb1a == (long) &hades_psdm_reg)
- start_addr--;
- }
- }
- else
- {
- /*
- * Bus error while reading.
- */
-
- if (frame->wb3s & WBV_040)
- writeback(frame->wb3s, frame->wb3a,
- frame->wb3d, &&scsi_bus_error);
- }
-
- eff_addr = (unsigned char *) frame->faddr;
-
- __asm__ __volatile__ ("move.l %0,%%sp\n\t"
- :
- : "r" (save_sp) );
- }
-
- dma_cnt = end_addr - start_addr;
-
- if (eff_addr == &hades_psdm_reg)
- {
- /*
- * Bus error occurred while reading the pseudo
- * DMA register. Time out.
- */
-
- tries--;
-
- if (tries <= 0)
- {
- if ((tt_scsi_dma.dma_ctrl & 1) == 0) /* Read or write? */
- set_restdata_reg(start_addr);
-
- if (dma_cnt <= 1)
- printk(KERN_CRIT "DMA emulation: Fatal "
- "error while %s the last byte.\n",
- (tt_scsi_dma.dma_ctrl & 1)
- ? "writing" : "reading");
-
- goto scsi_end;
- }
- else
- goto scsi_loop;
- }
- else
- {
- /*
- * Bus error during pseudo DMA transfer.
- * Terminate the DMA transfer.
- */
-
- hades_dma_ctrl |= 3; /* Set EOP and bus error. */
- if ((tt_scsi_dma.dma_ctrl & 1) == 0) /* Read or write? */
- set_restdata_reg(start_addr);
- goto scsi_end;
- }
-}
module_param(setup_hostid, int, 0);
-#if defined(CONFIG_TT_DMA_EMUL)
-#include "atari_dma_emul.c"
-#endif
-
#if defined(REAL_DMA)
static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
#ifdef REAL_DMA
tt_scsi_dma.dma_ctrl = 0;
atari_dma_residual = 0;
-#ifdef CONFIG_TT_DMA_EMUL
- if (MACH_IS_HADES) {
- if (request_irq(IRQ_AUTO_2, hades_dma_emulator,
- IRQ_TYPE_PRIO, "Hades DMA emulator",
- hades_dma_emulator)) {
- printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting (MACH_IS_HADES)",IRQ_AUTO_2);
- free_irq(IRQ_TT_MFP_SCSI, instance);
- scsi_unregister(atari_scsi_host);
- atari_stram_free(atari_dma_buffer);
- atari_dma_buffer = 0;
- return 0;
- }
- }
-#endif
- if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+
+ if (MACH_IS_MEDUSA) {
/* While the read overruns (described by Drew Eckhardt in
* NCR5380.c) never happened on TTs, they do in fact on the Medusa
* (This was the cause why SCSI didn't work right for so long
Scsi_Cmnd *cmd, int write_flag)
{
unsigned long possible_len, limit;
-#ifndef CONFIG_TT_DMA_EMUL
- if (MACH_IS_HADES)
- /* Hades has no SCSI DMA at all :-( Always force use of PIO */
- return 0;
-#endif
+
if (IS_A_TT())
/* TT SCSI DMA can transfer arbitrary #bytes */
return wanted_len;
#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT)
#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA)
-#define MACH_IS_HADES (atari_mch_type == ATARI_MACH_HADES)
#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40)
/* values for atari_switches */
*/
/* the following macro is used when enabling interrupts */
-#if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES)
+#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
/*
* IO bus memory addresses are 1:1 with the physical address,
- * except on the PCI bus of the Hades.
*/
-#ifdef CONFIG_HADES
-#define virt_to_bus(a) (virt_to_phys(a) + (MACH_IS_HADES ? 0x80000000 : 0))
-#define bus_to_virt(a) (phys_to_virt((a) - (MACH_IS_HADES ? 0x80000000 : 0)))
-#else
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
-#endif
#endif
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff