V4L/DVB (5064): ET61X251 driver updates.

- Implement audio ioctl's and VIDIOC_ENUM_FRAMESIZES
- Documentation updates
- Generic improvements

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 1bdee8f..1247566 100644 (file)
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -23,7 +23,7 @@ Index
 
 1. Copyright
 ============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>
 
 
 2. Disclaimer
@@ -135,8 +135,9 @@ And finally:
 6. Module loading
 =================
 To use the driver, it is necessary to load the "et61x251" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
 
 Loading can be done as shown below:
 

diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
index 2e5ca40..262f98e 100644 (file)
--- a/drivers/media/video/et61x251/et61x251.h
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -171,10 +171,7 @@ struct et61x251_device {
 struct et61x251_device*
 et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id)
 {
-       if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
-               return cam;
-
-       return NULL;
+       return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
 }
 
 

diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 49792ae..a652551 100644 (file)
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1,7 +1,7 @@
 /***************************************************************************
  * V4L2 driver for ET61X[12]51 PC Camera Controllers                       *
  *                                                                         *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -48,8 +48,8 @@
 #define ET61X251_MODULE_AUTHOR  "(C) 2006 Luca Risolia"
 #define ET61X251_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
 #define ET61X251_MODULE_LICENSE "GPL"
-#define ET61X251_MODULE_VERSION "1:1.02"
-#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 2)
+#define ET61X251_MODULE_VERSION "1:1.04"
+#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 4)
 
 /*****************************************************************************/
 
@@ -85,7 +85,7 @@ MODULE_PARM_DESC(force_munmap,
                 "\ndetected camera."
                 "\n 0 = do not force memory unmapping"
                 "\n 1 = force memory unmapping (save memory)"
-                "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+                "\nDefault value is "__MODULE_STRING(ET61X251_FORCE_MUNMAP)"."
                 "\n");
 
 static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] =
@@ -133,7 +133,8 @@ et61x251_request_buffers(struct et61x251_device* cam, u32 count,
 
        cam->nbuffers = count;
        while (cam->nbuffers > 0) {
-               if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+               if ((buff = vmalloc_32_user(cam->nbuffers *
+                                           PAGE_ALIGN(imagesize))))
                        break;
                cam->nbuffers--;
        }
@@ -543,10 +544,11 @@ static int et61x251_start_transfer(struct et61x251_device* cam)
 {
        struct usb_device *udev = cam->usbdev;
        struct urb* urb;
-       const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
-                                              864, 896, 920, 956, 980, 1000,
-                                              1022};
-       const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
+       struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
+                                                  usb_ifnum_to_if(udev, 0),
+                                                  ET61X251_ALTERNATE_SETTING);
+       const unsigned int psz = le16_to_cpu(altsetting->
+                                            endpoint[0].desc.wMaxPacketSize);
        s8 i, j;
        int err = 0;
 
@@ -976,29 +978,31 @@ static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
 static int et61x251_create_sysfs(struct et61x251_device* cam)
 {
        struct video_device *v4ldev = cam->v4ldev;
-       int rc;
+       int err = 0;
+
+       if ((err = video_device_create_file(v4ldev, &class_device_attr_reg)))
+               goto err_out;
+       if ((err = video_device_create_file(v4ldev, &class_device_attr_val)))
+               goto err_reg;
 
-       rc = video_device_create_file(v4ldev, &class_device_attr_reg);
-       if (rc) goto err;
-       rc = video_device_create_file(v4ldev, &class_device_attr_val);
-       if (rc) goto err_reg;
        if (cam->sensor.sysfs_ops) {
-               rc = video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
-               if (rc) goto err_val;
-               rc = video_device_create_file(v4ldev, &class_device_attr_i2c_val);
-               if (rc) goto err_i2c_reg;
+               if ((err = video_device_create_file(v4ldev,
+                                                 &class_device_attr_i2c_reg)))
+                       goto err_val;
+               if ((err = video_device_create_file(v4ldev,
+                                                 &class_device_attr_i2c_val)))
+                       goto err_i2c_reg;
        }
 
-       return 0;
-
 err_i2c_reg:
+       if (cam->sensor.sysfs_ops)
        video_device_remove_file(v4ldev, &class_device_attr_i2c_reg);
 err_val:
        video_device_remove_file(v4ldev, &class_device_attr_val);
 err_reg:
        video_device_remove_file(v4ldev, &class_device_attr_reg);
-err:
-       return rc;
+err_out:
+       return err;
 }
 #endif /* CONFIG_VIDEO_ADV_DEBUG */
 
@@ -1767,10 +1771,10 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
        rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
        rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
 
-       if (rect->width < 4)
-               rect->width = 4;
-       if (rect->height < 4)
-               rect->height = 4;
+       if (rect->width < 16)
+               rect->width = 16;
+       if (rect->height < 16)
+               rect->height = 16;
        if (rect->width > bounds->width)
                rect->width = bounds->width;
        if (rect->height > bounds->height)
@@ -1784,8 +1788,8 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
        if (rect->top + rect->height > bounds->top + bounds->height)
                rect->top = bounds->top+bounds->height - rect->height;
 
-       rect->width &= ~3L;
-       rect->height &= ~3L;
+       rect->width &= ~15L;
+       rect->height &= ~15L;
 
        if (ET61X251_PRESERVE_IMGSCALE) {
                /* Calculate the actual scaling factor */
@@ -1846,6 +1850,35 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
 
 
 static int
+et61x251_vidioc_enum_framesizes(struct et61x251_device* cam, void __user * arg)
+{
+       struct v4l2_frmsizeenum frmsize;
+
+       if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
+               return -EFAULT;
+
+       if (frmsize.index != 0)
+               return -EINVAL;
+
+       if (frmsize.pixel_format != V4L2_PIX_FMT_ET61X251 &&
+           frmsize.pixel_format != V4L2_PIX_FMT_SBGGR8)
+               return -EINVAL;
+
+       frmsize.type = V4L2_FRMSIZE_TYPE_STEPWISE;
+       frmsize.stepwise.min_width = frmsize.stepwise.step_width = 16;
+       frmsize.stepwise.min_height = frmsize.stepwise.step_height = 16;
+       frmsize.stepwise.max_width = cam->sensor.cropcap.bounds.width;
+       frmsize.stepwise.max_height = cam->sensor.cropcap.bounds.height;
+       memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
+
+       if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
+               return -EFAULT;
+
+       return 0;
+}
+
+
+static int
 et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
 {
        struct v4l2_fmtdesc fmtd;
@@ -1853,6 +1886,9 @@ et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
        if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
                return -EFAULT;
 
+       if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+               return -EINVAL;
+
        if (fmtd.index == 0) {
                strcpy(fmtd.description, "bayer rgb");
                fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
@@ -1934,17 +1970,17 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
        rect.width = scale * pix->width;
        rect.height = scale * pix->height;
 
-       if (rect.width < 4)
-               rect.width = 4;
-       if (rect.height < 4)
-               rect.height = 4;
+       if (rect.width < 16)
+               rect.width = 16;
+       if (rect.height < 16)
+               rect.height = 16;
        if (rect.width > bounds->left + bounds->width - rect.left)
                rect.width = bounds->left + bounds->width - rect.left;
        if (rect.height > bounds->top + bounds->height - rect.top)
                rect.height = bounds->top + bounds->height - rect.top;
 
-       rect.width &= ~3L;
-       rect.height &= ~3L;
+       rect.width &= ~15L;
+       rect.height &= ~15L;
 
        { /* adjust the scaling factor */
                u32 a, b;
@@ -2378,6 +2414,9 @@ static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
        case VIDIOC_S_FMT:
                return et61x251_vidioc_try_s_fmt(cam, cmd, arg);
 
+       case VIDIOC_ENUM_FRAMESIZES:
+               return et61x251_vidioc_enum_framesizes(cam, arg);
+
        case VIDIOC_G_JPEGCOMP:
                return et61x251_vidioc_g_jpegcomp(cam, arg);
 
@@ -2413,6 +2452,7 @@ static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
        case VIDIOC_QUERYSTD:
        case VIDIOC_ENUMSTD:
        case VIDIOC_QUERYMENU:
+       case VIDIOC_ENUM_FRAMEINTERVALS:
                return -EINVAL;
 
        default:
@@ -2459,6 +2499,7 @@ static const struct file_operations et61x251_fops = {
        .open =    et61x251_open,
        .release = et61x251_release,
        .ioctl =   et61x251_ioctl,
+       .compat_ioctl = v4l_compat_ioctl32,
        .read =    et61x251_read,
        .poll =    et61x251_poll,
        .mmap =    et61x251_mmap,
@@ -2497,7 +2538,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
        mutex_init(&cam->dev_mutex);
 
        DBG(2, "ET61X[12]51 PC Camera Controller detected "
-              "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+              "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct);
 
        for  (i = 0; et61x251_sensor_table[i]; i++) {
                err = et61x251_sensor_table[i](cam);
@@ -2550,9 +2591,14 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
        err = et61x251_create_sysfs(cam);
-       if (err)
-               goto fail2;
-       DBG(2, "Optional device control through 'sysfs' interface ready");
+       if (!err)
+               DBG(2, "Optional device control through 'sysfs' "
+                      "interface ready");
+       else
+               DBG(2, "Failed to create 'sysfs' interface for optional "
+                      "device controlling. Error #%d", err);
+#else
+       DBG(2, "Optional device control through 'sysfs' interface disabled");
 #endif
 
        usb_set_intfdata(intf, cam);
@@ -2561,13 +2607,6 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
        return 0;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-fail2:
-       video_nr[dev_nr] = -1;
-       dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
-       mutex_unlock(&cam->dev_mutex);
-       video_unregister_device(cam->v4ldev);
-#endif
 fail:
        if (cam) {
                kfree(cam->control_buffer);

diff --git a/drivers/media/video/et61x251/et61x251_sensor.h b/drivers/media/video/et61x251/et61x251_sensor.h
index 65edd08..5fadb5d 100644 (file)
--- a/drivers/media/video/et61x251/et61x251_sensor.h
+++ b/drivers/media/video/et61x251/et61x251_sensor.h
@@ -1,7 +1,7 @@
 /***************************************************************************
  * API for image sensors connected to ET61X[12]51 PC Camera Controllers    *
  *                                                                         *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -82,7 +82,7 @@ enum et61x251_i2c_rsta {
        ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */
 };
 
-#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+#define ET61X251_MAX_CTRLS (V4L2_CID_LASTP1-V4L2_CID_BASE+10)
 
 struct et61x251_sensor {
        char name[32];

diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
index a7d65b8..b066434 100644 (file)
--- a/drivers/media/video/et61x251/et61x251_tas5130d1b.c
+++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
@@ -2,7 +2,7 @@
  * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51        *
  * PC Camera Controllers                                                   *
  *                                                                         *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *