atmel-mci: change use of dma slave interface

Allow the use of another DMA controller driver in atmel-mci sd/mmc driver.
 This adds a generic dma_slave pointer to the mci platform structure where
we can store DMA controller information.  In atmel-mci we use information
provided by this structure to initialize the driver (with new helper
functions that are architecture dependant).

This also adds at32/avr32 chip modifications to cope with this new access
method.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
new file mode 100644 (file)
index 0000000..998cb0c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -0,0 +1,24 @@
+#ifndef __MACH_ATMEL_MCI_H
+#define __MACH_ATMEL_MCI_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+       struct at_dma_slave     sdata;
+};
+
+/* accessor macros */
+#define        slave_data_ptr(s)       (&(s)->sdata)
+#define find_slave_dev(s)      ((s)->sdata.dma_dev)
+
+#define        setup_dma_addr(s, t, r) do {            \
+       if (s) {                                \
+               (s)->sdata.tx_reg = (t);        \
+               (s)->sdata.rx_reg = (r);        \
+       }                                       \
+} while (0)
+
+#endif /* __MACH_ATMEL_MCI_H */

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index eb9d4dc..b40ff39 100644 (file)
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -15,6 +15,8 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+
+#include <mach/atmel-mci.h>
 #include <linux/atmel-mci.h>
 
 #include <asm/io.h>
@@ -1320,7 +1322,7 @@ struct platform_device *__init
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
        struct platform_device          *pdev;
-       struct dw_dma_slave             *dws = &data->dma_slave;
+       struct mci_dma_slave            *slave;
        u32                             pioa_mask;
        u32                             piob_mask;
 
@@ -1339,13 +1341,17 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
                                ARRAY_SIZE(atmel_mci0_resource)))
                goto fail;
 
-       dws->dma_dev = &dw_dmac0_device.dev;
-       dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
-       dws->cfg_hi = (DWC_CFGH_SRC_PER(0)
+       slave = kzalloc(sizeof(struct mci_dma_slave), GFP_KERNEL);
+
+       slave->sdata.dma_dev = &dw_dmac0_device.dev;
+       slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
+       slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
                                | DWC_CFGH_DST_PER(1));
-       dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL
+       slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
                                | DWC_CFGL_HS_SRC_POL);
 
+       data->dma_slave = slave;
+
        if (platform_device_add_data(pdev, data,
                                sizeof(struct mci_platform_data)))
                goto fail;
@@ -1411,6 +1417,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
        return pdev;
 
 fail:
+       data->dma_slave = NULL;
+       kfree(slave);
        platform_device_put(pdev);
        return NULL;
 }

diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
new file mode 100644 (file)
index 0000000..a9b3896
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
@@ -0,0 +1,24 @@
+#ifndef __MACH_ATMEL_MCI_H
+#define __MACH_ATMEL_MCI_H
+
+#include <linux/dw_dmac.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+       struct dw_dma_slave     sdata;
+};
+
+/* accessor macros */
+#define        slave_data_ptr(s)       (&(s)->sdata)
+#define find_slave_dev(s)      ((s)->sdata.dma_dev)
+
+#define        setup_dma_addr(s, t, r) do {            \
+       if (s) {                                \
+               (s)->sdata.tx_reg = (t);        \
+               (s)->sdata.rx_reg = (r);        \
+       }                                       \
+} while (0)
+
+#endif /* __MACH_ATMEL_MCI_H */

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fc25586..ba8b219 100644 (file)
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -25,6 +25,8 @@
 #include <linux/stat.h>
 
 #include <linux/mmc/host.h>
+
+#include <mach/atmel-mci.h>
 #include <linux/atmel-mci.h>
 
 #include <asm/io.h>
@@ -1584,14 +1586,43 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
 #ifdef CONFIG_MMC_ATMELMCI_DMA
 static bool filter(struct dma_chan *chan, void *slave)
 {
-       struct dw_dma_slave *dws = slave;
+       struct mci_dma_data     *sl = slave;
 
-       if (dws->dma_dev == chan->device->dev) {
-               chan->private = dws;
+       if (sl && find_slave_dev(sl) == chan->device->dev) {
+               chan->private = slave_data_ptr(sl);
                return true;
-       } else
+       } else {
                return false;
+       }
 }
+
+static void atmci_configure_dma(struct atmel_mci *host)
+{
+       struct mci_platform_data        *pdata;
+
+       if (host == NULL)
+               return;
+
+       pdata = host->pdev->dev.platform_data;
+
+       if (pdata && find_slave_dev(pdata->dma_slave)) {
+               dma_cap_mask_t mask;
+
+               setup_dma_addr(pdata->dma_slave,
+                              host->mapbase + MCI_TDR,
+                              host->mapbase + MCI_RDR);
+
+               /* Try to grab a DMA channel */
+               dma_cap_zero(mask);
+               dma_cap_set(DMA_SLAVE, mask);
+               host->dma.chan =
+                       dma_request_channel(mask, filter, pdata->dma_slave);
+       }
+       if (!host->dma.chan)
+               dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
+}
+#else
+static void atmci_configure_dma(struct atmel_mci *host) {}
 #endif
 
 static int __init atmci_probe(struct platform_device *pdev)
@@ -1645,22 +1676,7 @@ static int __init atmci_probe(struct platform_device *pdev)
        if (ret)
                goto err_request_irq;
 
-#ifdef CONFIG_MMC_ATMELMCI_DMA
-       if (pdata->dma_slave.dma_dev) {
-               struct dw_dma_slave *dws = &pdata->dma_slave;
-               dma_cap_mask_t mask;
-
-               dws->tx_reg = regs->start + MCI_TDR;
-               dws->rx_reg = regs->start + MCI_RDR;
-
-               /* Try to grab a DMA channel */
-               dma_cap_zero(mask);
-               dma_cap_set(DMA_SLAVE, mask);
-               host->dma.chan = dma_request_channel(mask, filter, dws);
-       }
-       if (!host->dma.chan)
-               dev_notice(&pdev->dev, "DMA not available, using PIO\n");
-#endif /* CONFIG_MMC_ATMELMCI_DMA */
+       atmci_configure_dma(host);
 
        platform_set_drvdata(pdev, host);
 

diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 57b1846..3e09b34 100644 (file)
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -3,8 +3,6 @@
 
 #define ATMEL_MCI_MAX_NR_SLOTS 2
 
-#include <linux/dw_dmac.h>
-
 /**
  * struct mci_slot_pdata - board-specific per-slot configuration
  * @bus_width: Number of data lines wired up the slot
@@ -34,7 +32,7 @@ struct mci_slot_pdata {
  * @slot: Per-slot configuration data.
  */
 struct mci_platform_data {
-       struct dw_dma_slave     dma_slave;
+       struct mci_dma_data     *dma_slave;
        struct mci_slot_pdata   slot[ATMEL_MCI_MAX_NR_SLOTS];
 };