ARM: PNX4008: convert watchdog to use clk API enable/disable calls

clk_set_rate() is not supposed to be used to turn clocks on and off.
That's what clk_enable/clk_disable is for.

Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index e514023..944ffa9 100644 (file)
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -740,10 +740,10 @@ static struct clk wdt_ck = {
        .name = "wdt_ck",
        .parent = &per_ck,
        .flags = NEEDS_INITIALIZATION,
-       .round_rate = &on_off_round_rate,
-       .set_rate = &on_off_set_rate,
        .enable_shift = 0,
        .enable_reg = TIMCLKCTRL_REG,
+       .enable = clk_reg_enable,
+       .disable = clk_reg_disable,
 };
 
 /* These clocks are visible outside this module

diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 8c5367f..c7a9479 100644 (file)
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -96,9 +96,6 @@ static void wdt_enable(void)
 {
        spin_lock(&io_lock);
 
-       if (wdt_clk)
-               clk_set_rate(wdt_clk, 1);
-
        /* stop counter, initiate counter reset */
        __raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
        /*wait for reset to complete. 100% guarantee event */
@@ -125,19 +122,25 @@ static void wdt_disable(void)
        spin_lock(&io_lock);
 
        __raw_writel(0, WDTIM_CTRL(wdt_base));  /*stop counter */
-       if (wdt_clk)
-               clk_set_rate(wdt_clk, 0);
 
        spin_unlock(&io_lock);
 }
 
 static int pnx4008_wdt_open(struct inode *inode, struct file *file)
 {
+       int ret;
+
        if (test_and_set_bit(WDT_IN_USE, &wdt_status))
                return -EBUSY;
 
        clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
+       ret = clk_enable(wdt_clk);
+       if (ret) {
+               clear_bit(WDT_IN_USE, &wdt_status);
+               return ret;
+       }
+
        wdt_enable();
 
        return nonseekable_open(inode, file);
@@ -225,6 +228,7 @@ static int pnx4008_wdt_release(struct inode *inode, struct file *file)
                printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
 
        wdt_disable();
+       clk_disable(wdt_clk);
        clear_bit(WDT_IN_USE, &wdt_status);
        clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -279,19 +283,27 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
                release_resource(wdt_mem);
                kfree(wdt_mem);
                goto out;
-       } else
-               clk_set_rate(wdt_clk, 1);
+       }
+
+       ret = clk_enable(wdt_clk);
+       if (ret) {
+               release_resource(wdt_mem);
+               kfree(wdt_mem);
+               goto out;
+       }
 
        ret = misc_register(&pnx4008_wdt_miscdev);
        if (ret < 0) {
                printk(KERN_ERR MODULE_NAME "cannot register misc device\n");
                release_resource(wdt_mem);
                kfree(wdt_mem);
-               clk_set_rate(wdt_clk, 0);
+               clk_disable(wdt_clk);
+               clk_put(wdt_clk);
        } else {
                boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
                    WDIOF_CARDRESET : 0;
                wdt_disable();          /*disable for now */
+               clk_disable(wdt_clk);
                set_bit(WDT_DEVICE_INITED, &wdt_status);
        }
 
@@ -302,11 +314,10 @@ out:
 static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
 {
        misc_deregister(&pnx4008_wdt_miscdev);
-       if (wdt_clk) {
-               clk_set_rate(wdt_clk, 0);
-               clk_put(wdt_clk);
-               wdt_clk = NULL;
-       }
+
+       clk_disable(wdt_clk);
+       clk_put(wdt_clk);
+
        if (wdt_mem) {
                release_resource(wdt_mem);
                kfree(wdt_mem);