m68k: Mac IRQ cleanup
authorFinn Thain <fthain@telegraphics.com.au>
Tue, 1 May 2007 20:32:58 +0000 (22:32 +0200)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Sat, 5 May 2007 00:59:07 +0000 (17:59 -0700)
There are no slow IRQs on Macs since Roman Zippel's IRQ reorganisation that
went into 2.6.16 and removed mac_irq_list[] and the do_mac_irq_list()
dispatcher. (They were implemented in do_mac_irq_list() by lowering the IPL.)
Hence there's no more use for mutual exclusion in the Mac interrupt
dispatchers. Remove it.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/m68k/mac/baboon.c
arch/m68k/mac/oss.c
arch/m68k/mac/psc.c
arch/m68k/mac/via.c

index 8ea7498..673a108 100644 (file)
@@ -22,7 +22,7 @@
 /* #define DEBUG_BABOON */
 /* #define DEBUG_IRQS */
 
-int baboon_present,baboon_active;
+int baboon_present;
 volatile struct baboon *baboon;
 
 irqreturn_t baboon_irq(int, void *);
@@ -45,7 +45,6 @@ void __init baboon_init(void)
 
        baboon = (struct baboon *) BABOON_BASE;
        baboon_present = 1;
-       baboon_active = 0;
 
        printk("Baboon detected at %p\n", baboon);
 }
@@ -70,9 +69,9 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
        unsigned char events;
 
 #ifdef DEBUG_IRQS
-       printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X active %02X\n",
+       printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n",
                (uint) baboon->mb_control, (uint) baboon->mb_ifr,
-               (uint) baboon->mb_status,  baboon_active);
+               (uint) baboon->mb_status);
 #endif
 
        if (!(events = baboon->mb_ifr & 0x07))
@@ -81,11 +80,9 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
        irq_num = IRQ_BABOON_0;
        irq_bit = 1;
        do {
-               if (events & irq_bit/* & baboon_active*/) {
-                       baboon_active &= ~irq_bit;
+               if (events & irq_bit) {
                        baboon->mb_ifr &= ~irq_bit;
                        m68k_handle_int(irq_num);
-                       baboon_active |= irq_bit;
                }
                irq_bit <<= 1;
                irq_num++;
@@ -99,21 +96,18 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
 }
 
 void baboon_irq_enable(int irq) {
-       int irq_idx     = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
        printk("baboon_irq_enable(%d)\n", irq);
 #endif
-       baboon_active |= (1 << irq_idx);
+       /* FIXME: figure out how to mask and unmask baboon interrupt sources */
+       enable_irq(IRQ_NUBUS_C);
 }
 
 void baboon_irq_disable(int irq) {
-       int irq_idx     = IRQ_IDX(irq);
-
 #ifdef DEBUG_IRQUSE
        printk("baboon_irq_disable(%d)\n", irq);
 #endif
-       baboon_active &= ~(1 << irq_idx);
+       disable_irq(IRQ_NUBUS_C);
 }
 
 void baboon_irq_clear(int irq) {
index 6399883..d7be169 100644 (file)
@@ -112,10 +112,8 @@ irqreturn_t oss_irq(int irq, void *dev_id)
                oss->irq_pending &= ~OSS_IP_SOUND;
                /* FIXME: call sound handler */
        } else if (events & OSS_IP_SCSI) {
-               oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
                oss->irq_pending &= ~OSS_IP_SCSI;
                m68k_handle_int(IRQ_MAC_SCSI);
-               oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
        } else {
                /* FIXME: error check here? */
        }
@@ -149,10 +147,8 @@ irqreturn_t oss_nubus_irq(int irq, void *dev_id)
                --i;
                irq_bit >>= 1;
                if (events & irq_bit) {
-                       oss->irq_level[i] = OSS_IRQLEV_DISABLED;
                        oss->irq_pending &= ~irq_bit;
                        m68k_handle_int(NUBUS_SOURCE_BASE + i);
-                       oss->irq_level[i] = OSS_IRQLEV_NUBUS;
                }
        } while(events & (irq_bit - 1));
        return IRQ_HANDLED;
index 1dba882..d66f723 100644 (file)
@@ -147,10 +147,8 @@ irqreturn_t psc_irq(int irq, void *dev_id)
        irq_bit = 1;
        do {
                if (events & irq_bit) {
-                       psc_write_byte(pIER, irq_bit);
                        psc_write_byte(pIFR, irq_bit);
                        m68k_handle_int(irq_num);
-                       psc_write_byte(pIER, irq_bit | 0x80);
                }
                irq_num++;
                irq_bit <<= 1;
index 83a3bb0..d5cac72 100644 (file)
@@ -443,11 +443,6 @@ void __init via_nubus_init(void)
 /*
  * The generic VIA interrupt routines (shamelessly stolen from Alan Cox's
  * via6522.c :-), disable/pending masks added.
- *
- * The new interrupt architecture in macints.c takes care of a lot of the
- * gruntwork for us, including tallying the interrupts and calling the
- * handlers on the linked list. All we need to do here is basically generate
- * the machspec interrupt number after clearing the interrupt.
  */
 
 irqreturn_t via1_irq(int irq, void *dev_id)
@@ -463,10 +458,8 @@ irqreturn_t via1_irq(int irq, void *dev_id)
        irq_bit = 1;
        do {
                if (events & irq_bit) {
-                       via1[vIER] = irq_bit;
                        via1[vIFR] = irq_bit;
                        m68k_handle_int(irq_num);
-                       via1[vIER] = irq_bit | 0x80;
                }
                ++irq_num;
                irq_bit <<= 1;
@@ -502,11 +495,8 @@ irqreturn_t via2_irq(int irq, void *dev_id)
        irq_bit = 1;
        do {
                if (events & irq_bit) {
-                       via2[gIER] = irq_bit;
                        via2[gIFR] = irq_bit | rbv_clear;
                        m68k_handle_int(irq_num);
-                       if (irq_num != IRQ_MAC_NUBUS || nubus_disabled == 0)
-                               via2[gIER] = irq_bit | 0x80;
                }
                ++irq_num;
                irq_bit <<= 1;