--- /dev/null
+/*
+ * Copyright (C) 2009 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <drm/drm_encoder_slave.h>
+
+/**
+ * drm_i2c_encoder_init - Initialize an I2C slave encoder
+ * @dev: DRM device.
+ * @encoder: Encoder to be attached to the I2C device. You aren't
+ * required to have called drm_encoder_init() before.
+ * @adap: I2C adapter that will be used to communicate with
+ * the device.
+ * @info: Information that will be used to create the I2C device.
+ * Required fields are @addr and @type.
+ *
+ * Create an I2C device on the specified bus (the module containing its
+ * driver is transparently loaded) and attach it to the specified
+ * &drm_encoder_slave. The @slave_funcs field will be initialized with
+ * the hooks provided by the slave driver.
+ *
+ * Returns 0 on success or a negative errno on failure, in particular,
+ * -ENODEV is returned when no matching driver is found.
+ */
+int drm_i2c_encoder_init(struct drm_device *dev,
+ struct drm_encoder_slave *encoder,
+ struct i2c_adapter *adap,
+ const struct i2c_board_info *info)
+{
+ char modalias[sizeof(I2C_MODULE_PREFIX)
+ + I2C_NAME_SIZE];
+ struct module *module = NULL;
+ struct i2c_client *client;
+ struct drm_i2c_encoder_driver *encoder_drv;
+ int err = 0;
+
+ snprintf(modalias, sizeof(modalias),
+ "%s%s", I2C_MODULE_PREFIX, info->type);
+ request_module(modalias);
+
+ client = i2c_new_device(adap, info);
+ if (!client) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ if (!client->driver) {
+ err = -ENODEV;
+ goto fail_unregister;
+ }
+
+ module = client->driver->driver.owner;
+ if (!try_module_get(module)) {
+ err = -ENODEV;
+ goto fail_unregister;
+ }
+
+ encoder->bus_priv = client;
+
+ encoder_drv = to_drm_i2c_encoder_driver(client->driver);
+
+ err = encoder_drv->encoder_init(client, dev, encoder);
+ if (err)
+ goto fail_unregister;
+
+ return 0;
+
+fail_unregister:
+ i2c_unregister_device(client);
+ module_put(module);
+fail:
+ return err;
+}
+EXPORT_SYMBOL(drm_i2c_encoder_init);
+
+/**
+ * drm_i2c_encoder_destroy - Unregister the I2C device backing an encoder
+ * @drm_encoder: Encoder to be unregistered.
+ *
+ * This should be called from the @destroy method of an I2C slave
+ * encoder driver once I2C access is no longer needed.
+ */
+void drm_i2c_encoder_destroy(struct drm_encoder *drm_encoder)
+{
+ struct drm_encoder_slave *encoder = to_encoder_slave(drm_encoder);
+ struct i2c_client *client = drm_i2c_encoder_get_client(drm_encoder);
+ struct module *module = client->driver->driver.owner;
+
+ i2c_unregister_device(client);
+ encoder->bus_priv = NULL;
+
+ module_put(module);
+}
+EXPORT_SYMBOL(drm_i2c_encoder_destroy);
--- /dev/null
+/*
+ * Copyright (C) 2009 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __DRM_ENCODER_SLAVE_H__
+#define __DRM_ENCODER_SLAVE_H__
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+
+/**
+ * struct drm_encoder_slave_funcs - Entry points exposed by a slave encoder driver
+ * @set_config: Initialize any encoder-specific modesetting parameters.
+ * The meaning of the @params parameter is implementation
+ * dependent. It will usually be a structure with DVO port
+ * data format settings or timings. It's not required for
+ * the new parameters to take effect until the next mode
+ * is set.
+ *
+ * Most of its members are analogous to the function pointers in
+ * &drm_encoder_helper_funcs and they can optionally be used to
+ * initialize the latter. Connector-like methods (e.g. @get_modes and
+ * @set_property) will typically be wrapped around and only be called
+ * if the encoder is the currently selected one for the connector.
+ */
+struct drm_encoder_slave_funcs {
+ void (*set_config)(struct drm_encoder *encoder,
+ void *params);
+
+ void (*destroy)(struct drm_encoder *encoder);
+ void (*dpms)(struct drm_encoder *encoder, int mode);
+ void (*save)(struct drm_encoder *encoder);
+ void (*restore)(struct drm_encoder *encoder);
+ bool (*mode_fixup)(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+ int (*mode_valid)(struct drm_encoder *encoder,
+ struct drm_display_mode *mode);
+ void (*mode_set)(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+
+ enum drm_connector_status (*detect)(struct drm_encoder *encoder,
+ struct drm_connector *connector);
+ int (*get_modes)(struct drm_encoder *encoder,
+ struct drm_connector *connector);
+ int (*create_resources)(struct drm_encoder *encoder,
+ struct drm_connector *connector);
+ int (*set_property)(struct drm_encoder *encoder,
+ struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t val);
+
+};
+
+/**
+ * struct drm_encoder_slave - Slave encoder struct
+ * @base: DRM encoder object.
+ * @slave_funcs: Slave encoder callbacks.
+ * @slave_priv: Slave encoder private data.
+ * @bus_priv: Bus specific data.
+ *
+ * A &drm_encoder_slave has two sets of callbacks, @slave_funcs and the
+ * ones in @base. The former are never actually called by the common
+ * CRTC code, it's just a convenience for splitting the encoder
+ * functions in an upper, GPU-specific layer and a (hopefully)
+ * GPU-agnostic lower layer: It's the GPU driver responsibility to
+ * call the slave methods when appropriate.
+ *
+ * drm_i2c_encoder_init() provides a way to get an implementation of
+ * this.
+ */
+struct drm_encoder_slave {
+ struct drm_encoder base;
+
+ struct drm_encoder_slave_funcs *slave_funcs;
+ void *slave_priv;
+ void *bus_priv;
+};
+#define to_encoder_slave(x) container_of((x), struct drm_encoder_slave, base)
+
+int drm_i2c_encoder_init(struct drm_device *dev,
+ struct drm_encoder_slave *encoder,
+ struct i2c_adapter *adap,
+ const struct i2c_board_info *info);
+
+
+/**
+ * struct drm_i2c_encoder_driver
+ *
+ * Describes a device driver for an encoder connected to the GPU
+ * through an I2C bus. In addition to the entry points in @i2c_driver
+ * an @encoder_init function should be provided. It will be called to
+ * give the driver an opportunity to allocate any per-encoder data
+ * structures and to initialize the @slave_funcs and (optionally)
+ * @slave_priv members of @encoder.
+ */
+struct drm_i2c_encoder_driver {
+ struct i2c_driver i2c_driver;
+
+ int (*encoder_init)(struct i2c_client *client,
+ struct drm_device *dev,
+ struct drm_encoder_slave *encoder);
+
+};
+#define to_drm_i2c_encoder_driver(x) container_of((x), \
+ struct drm_i2c_encoder_driver, \
+ i2c_driver)
+
+/**
+ * drm_i2c_encoder_get_client - Get the I2C client corresponding to an encoder
+ */
+static inline struct i2c_client *drm_i2c_encoder_get_client(struct drm_encoder *encoder)
+{
+ return (struct i2c_client *)to_encoder_slave(encoder)->bus_priv;
+}
+
+/**
+ * drm_i2c_encoder_register - Register an I2C encoder driver
+ * @owner: Module containing the driver.
+ * @driver: Driver to be registered.
+ */
+static inline int drm_i2c_encoder_register(struct module *owner,
+ struct drm_i2c_encoder_driver *driver)
+{
+ return i2c_register_driver(owner, &driver->i2c_driver);
+}
+
+/**
+ * drm_i2c_encoder_unregister - Unregister an I2C encoder driver
+ * @driver: Driver to be unregistered.
+ */
+static inline void drm_i2c_encoder_unregister(struct drm_i2c_encoder_driver *driver)
+{
+ return i2c_del_driver(&driver->i2c_driver);
+}
+
+void drm_i2c_encoder_destroy(struct drm_encoder *encoder);
+
+#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff