[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h

The optimal change would be to move the AC97 register definitions into
the AC97 driver, unfortunately, the registers are shared between several
files. Move them into a dedicated regs-ac97.h first.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index cb9b46d..a565028 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -132,102 +132,6 @@
  */
 
 /*
- * AC97 Controller registers
- */
-
-#define POCR           __REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
-#define POCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
-
-#define PICR           __REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
-#define PICR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
-
-#define MCCR           __REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
-
-#define GCR            __REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB     (1 << 31)       /* Internal clock enable */
-#endif
-#define GCR_nDMAEN     (1 << 24)       /* non DMA Enable */
-#define GCR_CDONE_IE   (1 << 19)       /* Command Done Interrupt Enable */
-#define GCR_SDONE_IE   (1 << 18)       /* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN (1 << 9)        /* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN (1 << 8)        /* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN (1 << 5)        /* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN (1 << 4)        /* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF (1 << 3)        /* AC-link Shut Off */
-#define GCR_WARM_RST   (1 << 2)        /* AC97 Warm Reset */
-#define GCR_COLD_RST   (1 << 1)        /* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE                (1 << 0)        /* Codec GPI Interrupt Enable */
-
-#define POSR           __REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE     (1 << 4)        /* FIFO error */
-#define POSR_FSR       (1 << 2)        /* FIFO Service Request */
-
-#define PISR           __REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE     (1 << 4)        /* FIFO error */
-#define PISR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR       (1 << 2)        /* FIFO Service Request */
-
-#define MCSR           __REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE     (1 << 4)        /* FIFO error */
-#define MCSR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR       (1 << 2)        /* FIFO Service Request */
-
-#define GSR            __REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE      (1 << 19)       /* Command Done */
-#define GSR_SDONE      (1 << 18)       /* Status Done */
-#define GSR_RDCS       (1 << 15)       /* Read Completion Status */
-#define GSR_BIT3SLT12  (1 << 14)       /* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12  (1 << 13)       /* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12  (1 << 12)       /* Bit 1 of slot 12 */
-#define GSR_SECRES     (1 << 11)       /* Secondary Resume Interrupt */
-#define GSR_PRIRES     (1 << 10)       /* Primary Resume Interrupt */
-#define GSR_SCR                (1 << 9)        /* Secondary Codec Ready */
-#define GSR_PCR                (1 << 8)        /*  Primary Codec Ready */
-#define GSR_MCINT      (1 << 7)        /* Mic In Interrupt */
-#define GSR_POINT      (1 << 6)        /* PCM Out Interrupt */
-#define GSR_PIINT      (1 << 5)        /* PCM In Interrupt */
-#define GSR_ACOFFD     (1 << 3)        /* AC-link Shut Off Done */
-#define GSR_MOINT      (1 << 2)        /* Modem Out Interrupt */
-#define GSR_MIINT      (1 << 1)        /* Modem In Interrupt */
-#define GSR_GSCI       (1 << 0)        /* Codec GPI Status Change Interrupt */
-
-#define CAR            __REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP       (1 << 0)        /* Codec Access In Progress */
-
-#define PCDR           __REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR           __REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR           __REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE      (1 << 3)        /* FIFO Error */
-#define MOCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
-
-#define MICR           __REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE      (1 << 3)        /* FIFO Error */
-#define MICR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
-
-#define MOSR           __REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE     (1 << 4)        /* FIFO error */
-#define MOSR_FSR       (1 << 2)        /* FIFO Service Request */
-
-#define MISR           __REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE     (1 << 4)        /* FIFO error */
-#define MISR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR       (1 << 2)        /* FIFO Service Request */
-
-#define MODR           __REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE   __REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE   __REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE   __REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE   __REG(0x40500500)  /* Secondary Modem Codec */
-
-
-/*
  * Fast Infrared Communication Port - moved into drivers/net/irda/pxaficp_ir.c
  */
 

diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
new file mode 100644 (file)
index 0000000..e41b9d2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR           __REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define PICR           __REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MCCR           __REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE      (1 << 3)        /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define GCR            __REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB     (1 << 31)       /* Internal clock enable */
+#endif
+#define GCR_nDMAEN     (1 << 24)       /* non DMA Enable */
+#define GCR_CDONE_IE   (1 << 19)       /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE   (1 << 18)       /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9)        /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8)        /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5)        /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4)        /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3)        /* AC-link Shut Off */
+#define GCR_WARM_RST   (1 << 2)        /* AC97 Warm Reset */
+#define GCR_COLD_RST   (1 << 1)        /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE                (1 << 0)        /* Codec GPI Interrupt Enable */
+
+#define POSR           __REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE     (1 << 4)        /* FIFO error */
+#define POSR_FSR       (1 << 2)        /* FIFO Service Request */
+
+#define PISR           __REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE     (1 << 4)        /* FIFO error */
+#define PISR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR       (1 << 2)        /* FIFO Service Request */
+
+#define MCSR           __REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE     (1 << 4)        /* FIFO error */
+#define MCSR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR       (1 << 2)        /* FIFO Service Request */
+
+#define GSR            __REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE      (1 << 19)       /* Command Done */
+#define GSR_SDONE      (1 << 18)       /* Status Done */
+#define GSR_RDCS       (1 << 15)       /* Read Completion Status */
+#define GSR_BIT3SLT12  (1 << 14)       /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12  (1 << 13)       /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12  (1 << 12)       /* Bit 1 of slot 12 */
+#define GSR_SECRES     (1 << 11)       /* Secondary Resume Interrupt */
+#define GSR_PRIRES     (1 << 10)       /* Primary Resume Interrupt */
+#define GSR_SCR                (1 << 9)        /* Secondary Codec Ready */
+#define GSR_PCR                (1 << 8)        /*  Primary Codec Ready */
+#define GSR_MCINT      (1 << 7)        /* Mic In Interrupt */
+#define GSR_POINT      (1 << 6)        /* PCM Out Interrupt */
+#define GSR_PIINT      (1 << 5)        /* PCM In Interrupt */
+#define GSR_ACOFFD     (1 << 3)        /* AC-link Shut Off Done */
+#define GSR_MOINT      (1 << 2)        /* Modem Out Interrupt */
+#define GSR_MIINT      (1 << 1)        /* Modem In Interrupt */
+#define GSR_GSCI       (1 << 0)        /* Codec GPI Status Change Interrupt */
+
+#define CAR            __REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP       (1 << 0)        /* Codec Access In Progress */
+
+#define PCDR           __REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR           __REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR           __REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE      (1 << 3)        /* FIFO Error */
+#define MOCR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MICR           __REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE      (1 << 3)        /* FIFO Error */
+#define MICR_FSRIE     (1 << 1)        /* FIFO Service Request Interrupt Enable */
+
+#define MOSR           __REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE     (1 << 4)        /* FIFO error */
+#define MOSR_FSR       (1 << 2)        /* FIFO Service Request */
+
+#define MISR           __REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE     (1 << 4)        /* FIFO error */
+#define MISR_EOC       (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR       (1 << 2)        /* FIFO Service Request */
+
+#define MODR           __REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE   __REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE   __REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE   __REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE   __REG(0x40500500)  /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */

diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index ba64875..1d11e2b 100644 (file)
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -31,7 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 
 #define VERSION                "0.13"
 

diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 34c1d94..ef6539e 100644 (file)
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -22,7 +22,7 @@
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
 

diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index c2635be..85cf591 100644 (file)
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 #include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index a7a3a9c..5e72739 100644 (file)
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -21,6 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"