/* Load RISC code. */
risc_address = ha->fwstart;
- fw_data = (const __le16 *)&fw->data[4];
+ fw_data = (const __le16 *)&fw->data[6];
risc_code_size = (fw->size - 6) / 2;
for (i = 0; i < risc_code_size; i++) {
/* Load RISC code. */
risc_address = ha->fwstart;
- fw_data = (const __le16 *)&fw->data[4];
+ fw_data = (const __le16 *)&fw->data[6];
risc_code_size = (fw->size - 6) / 2;
dprintk(1, "%s: DMA RISC code (%i) words\n",
ha->devnum = devnum; /* specifies microcode load address */
#ifdef QLA_64BIT_PTR
- if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
- if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32))) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
ha->host_no);
#else
- if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32))) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
+ bnx2/bnx2-rv2p-09-4.6.15.fw \
+ bnx2/bnx2-mips-06-4.6.16.fw \
+ bnx2/bnx2-rv2p-06-4.6.16.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.1.0.bin
+ fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
sb16/ima_adpcm_init.csp \
sb16/ima_adpcm_playback.csp \
sb16/ima_adpcm_capture.csp
- fw-shipped-$(CONFIG_SLICOSS) += slicoss/gbdownload.sys slicoss/gbrcvucode.sys \
- slicoss/oasisdbgdownload.sys \
- slicoss/oasisdownload.sys \
- slicoss/oasisrcvucode.sys
- fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \
- sxg/saharadbgdownloadB.sys
fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
yamaha/ds1e_ctrl.fw
+ fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
tigon/tg3_tso5.bin
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
quiet_cmd_ihex2fw = IHEX2FW $@
- cmd_ihex2fw = $(objtree)/scripts/ihex2fw $< $@
+ cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
quiet_cmd_h16tofw = H16TOFW $@
- cmd_h16tofw = $(objtree)/scripts/ihex2fw -w $< $@
+ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
quiet_cmd_fwbin = MK_FW $@
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
+ # Don't depend on ihex2fw if we're installing and it already exists.
+ # Putting it after | in the dependencies doesn't seem sufficient when
+ # we're installing after a cross-compile, because ihex2fw has dependencies
+ # on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
+ # thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+ # is exported read-only for someone to run 'make install'.
+ ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ ihex2fw_dep :=
+ else
+ ihex2fw_dep := $(obj)/ihex2fw
+ endif
+
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
- $(obj)/%.fw: $(obj)/%.HEX | $(objtree)/$(obj)/$$(dir %)
+ $(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
- $(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %)
+ $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
obj-n := dummy
+
+ hostprogs-y := ihex2fw
--------------------------------------------------------------------------
+ Driver: ambassador -- Madge Ambassador (Collage PCI 155 Server) ATM NIC.
+
+ File: firmware/atmsar11.fw
+
+ Licence: Allegedly GPLv2+, but no source visible. Marked:
+
+ Madge Ambassador ATM Adapter microcode.
+ Copyright (C) 1995-1999 Madge Networks Ltd.
+
+ This microcode data is placed under the terms of the GNU General
+ Public License. The GPL is contained in /usr/doc/copyright/GPL on a
+ Debian system and in the file COPYING in the Linux kernel source.
+
+ We would prefer you not to distribute modified versions without
+ consultation and not to ask for assembly/other microcode source.
+
+ --------------------------------------------------------------------------
+
Driver: korg1212 -- Korg 1212 IO audio device
File: korg/k1212.dsp
--------------------------------------------------------------------------
- Driver: SLICOSS - Alacritech IS-NIC products
-
- File: slicoss/gbdownload.sys.ihex
- File: slicoss/gbrcvucode.sys.ihex
- File: slicoss/oasisdbgdownload.sys.ihex
- File: slicoss/oasisdownload.sys.ihex
- File: slicoss/oasisrcvucode.sys.ihex
-
- Licence:
- Copyright (C) 1999-2009 Alacritech, Inc.
-
- as an unpublished work. This notice does not imply unrestricted or
- public access to the source code from which this firmware image is
- derived. Except as noted below this firmware image may not be
- reproduced, used, sold or transferred to any third party without
- Alacritech's prior written consent. All Rights Reserved.
-
- Permission is hereby granted for the distribution of this firmware
- image as part of a Linux or other Open Source operating system kernel
- in text or binary form as required.
-
- This firmware may not be modified and may only be used with
- Alacritech hardware.
-
- Found in hex form in kernel source.
-
- --------------------------------------------------------------------------
-
- Driver: SXG - Alacritech IS-NIC products
-
- File: sxg/saharadownloadB.sys.ihex
- File: sxg/saharadbgdownloadB.sys.ihex
-
- Licence:
- Copyright (C) 1999-2009 Alacritech, Inc.
-
- as an unpublished work. This notice does not imply unrestricted or
- public access to the source code from which this firmware image is
- derived. Except as noted below this firmware image may not be
- reproduced, used, sold or transferred to any third party without
- Alacritech's prior written consent. All Rights Reserved.
-
- Permission is hereby granted for the distribution of this firmware
- image as part of a Linux or other Open Source operating system kernel
- in text or binary form as required.
-
- This firmware may not be modified and may only be used with
- Alacritech hardware.
-
- Found in hex form in kernel source.
-
- --------------------------------------------------------------------------
-
Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
File: cxgb3/t3b_psram-1.1.0.bin.ihex
--------------------------------------------------------------------------
-
+Driver: MYRI_SBUS - MyriCOM Gigabit Ethernet
+
+File: myricom/lanai.bin
+
+Licence: Unknown
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
+Driver: BNX2 - Broadcom NetXtremeII
+
+File: bnx2/bnx2-mips-06-4.6.16.fw
+File: bnx2/bnx2-rv2p-06-4.6.16.fw
+File: bnx2/bnx2-mips-09-4.6.17.fw
+File: bnx2/bnx2-rv2p-09-4.6.15.fw
+
+Licence:
+
+ This file contains firmware data derived from proprietary unpublished
+ source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+
+ Permission is hereby granted for the distribution of this firmware data
+ in hexadecimal or equivalent format, provided this copyright notice is
+ accompanying it.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
++
+ Driver: DVB AV7110 -- AV7110 cards
+
+ File: av7110/bootcode.bin
+
+ Licence: GPLv2 or later
+
+ ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S
+
+ --------------------------------------------------------------------------
+
+ Driver: wavefront - ISA WaveFront sound card
+
+ File: yamaha/yss225_registers.bin
+
+ Licence: Allegedly GPLv2+, but no source visible.
+
+ Found in hex form in kernel source, with the following comment:
+ Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+
+ --------------------------------------------------------------------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff