* Driver for DBRI sound chip found on Sparcs.
* Copyright (C) 2004, 2005 Martin Habets (mhabets@users.sourceforge.net)
*
+ * Converted to ring buffered version by Krzysztof Helt (krzysztof.h1@wp.pl)
+ *
* Based entirely upon drivers/sbus/audio/dbri.c which is:
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
* Copyright (C) 1998, 1999 Brent Baccala (baccala@freesoft.org)
* the CPU and the DBRI
*/
struct dbri_dma {
- volatile s32 cmd[DBRI_NO_CMDS]; /* Place for commands */
+ s32 cmd[DBRI_NO_CMDS]; /* Place for commands */
volatile s32 intr[DBRI_INT_BLK]; /* Interrupt field */
struct dbri_mem desc[DBRI_NO_DESCS]; /* Xmit/receive descriptors */
};
struct dbri_streaminfo {
struct snd_pcm_substream *substream;
u32 dvma_buffer; /* Device view of Alsa DMA buffer */
- int left; /* # of bytes left in DMA buffer */
int size; /* Size of DMA buffer */
size_t offset; /* offset in user buffer */
int pipe; /* Data pipe used */
void __iomem *regs; /* dbri HW regs */
int dbri_irqp; /* intr queue pointer */
- int wait_send; /* sequence of command buffers send */
- int wait_ackd; /* sequence of command buffers acknowledged */
struct dbri_pipe pipes[DBRI_NO_PIPES]; /* DBRI's 32 data pipes */
int next_desc[DBRI_NO_DESCS]; /* Index of next desc, or -1 */
+ spinlock_t cmdlock; /* Protects cmd queue accesses */
+ s32 *cmdptr; /* Pointer to the last queued cmd */
int chi_bpf;
#define DBRI_TD_TBC (1<<0) /* Transmit buffer Complete */
#define DBRI_TD_STATUS(v) ((v)&0xff) /* Transmit status */
/* Maximum buffer size per TD: almost 8Kb */
-#define DBRI_TD_MAXCNT ((1 << 13) - 1)
+#define DBRI_TD_MAXCNT ((1 << 13) - 4)
/* Receive descriptor defines */
#define DBRI_RD_F (1<<31) /* End of Frame */
CPU interrupt to signal completion.
Since the DBRI can run in parallel with the CPU, several means of
-synchronization present themselves. The method implemented here is close
-to the original scheme (Rudolf's), and uses 2 counters (wait_send and
-wait_ackd) to synchronize the command buffer between the CPU and the DBRI.
+synchronization present themselves. The method implemented here is only
+to use the dbri_cmdwait() to wait for execution of batch of sent commands.
-A more sophisticated scheme might involve a circular command buffer
-or an array of command buffers. A routine could fill one with
-commands and link it onto a list. When a interrupt signaled
-completion of the current command buffer, look on the list for
-the next one.
+A circular command buffer is used here. A new command is being added
+while other can be executed. The scheme works by adding two WAIT commands
+after each sent batch of commands. When the next batch is prepared it is
+added after the WAIT commands then the WAITs are replaced with single JUMP
+command to the new batch. The the DBRI is forced to reread the last WAIT
+command (replaced by the JUMP by then). If the DBRI is still executing
+previous commands the request to reread the WAIT command is ignored.
Every time a routine wants to write commands to the DBRI, it must
-first call dbri_cmdlock() and get an initial pointer into dbri->dma->cmd
-in return. dbri_cmdlock() will block if the previous commands have not
-been completed yet. After this the commands can be written to the buffer,
-and dbri_cmdsend() is called with the final pointer value to send them
-to the DBRI.
+first call dbri_cmdlock() and get pointer to a free space in
+dbri->dma->cmd buffer. After this, the commands can be written to
+the buffer, and dbri_cmdsend() is called with the final pointer value
+to send them to the DBRI.
*/
static void dbri_process_interrupt_buffer(struct snd_dbri * dbri);
-enum dbri_lock { NoGetLock, GetLock };
#define MAXLOOPS 10
-
-static volatile s32 *dbri_cmdlock(struct snd_dbri * dbri, enum dbri_lock get)
+/*
+ * Wait for the current command string to execute
+ */
+static void dbri_cmdwait(struct snd_dbri *dbri)
{
int maxloops = MAXLOOPS;
-#ifndef SMP
- if ((get == GetLock) && spin_is_locked(&dbri->lock)) {
- printk(KERN_ERR "DBRI: cmdlock called while in spinlock.");
- }
-#endif
-
/* Delay if previous commands are still being processed */
- while ((--maxloops) > 0 && (dbri->wait_send != dbri->wait_ackd)) {
+ while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
msleep_interruptible(1);
- }
+
if (maxloops == 0) {
- printk(KERN_ERR "DBRI: Chip never completed command buffer %d\n",
- dbri->wait_send);
+ printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
} else {
dprintk(D_CMD, "Chip completed command buffer (%d)\n",
MAXLOOPS - maxloops - 1);
}
+}
+/*
+ * Lock the command queue and returns pointer to a space for len cmd words
+ * It locks the cmdlock spinlock.
+ */
+static s32 *dbri_cmdlock(struct snd_dbri * dbri, int len)
+{
+ /* Space for 2 WAIT cmds (replaced later by 1 JUMP cmd) */
+ len += 2;
+ spin_lock(&dbri->cmdlock);
+ if (dbri->cmdptr - dbri->dma->cmd + len < DBRI_NO_CMDS - 2)
+ return dbri->cmdptr + 2;
+ else if (len < sbus_readl(dbri->regs + REG8) - dbri->dma_dvma)
+ return dbri->dma->cmd;
+ else
+ printk(KERN_ERR "DBRI: no space for commands.");
- /*if (get == GetLock) spin_lock(&dbri->lock); */
- return &dbri->dma->cmd[0];
+ return 0;
}
-static void dbri_cmdsend(struct snd_dbri * dbri, volatile s32 * cmd)
+/*
+ * Send prepared cmd string. It works by writting a JMP cmd into
+ * the last WAIT cmd and force DBRI to reread the cmd.
+ * The JMP cmd points to the new cmd string.
+ * It also releases the cmdlock spinlock.
+ */
+static void dbri_cmdsend(struct snd_dbri * dbri, s32 * cmd,int len)
{
- volatile s32 *ptr;
+ s32 *ptr;
+ s32 tmp, addr;
+ static int wait_id = 0;
- for (ptr = &dbri->dma->cmd[0]; ptr < cmd; ptr++) {
- dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
- }
+ wait_id++;
+ wait_id &= 0xffff; /* restrict it to a 16 bit counter. */
+ *(cmd) = DBRI_CMD(D_WAIT, 1, wait_id);
+ *(cmd+1) = DBRI_CMD(D_WAIT, 1, wait_id);
- if ((cmd - &dbri->dma->cmd[0]) >= DBRI_NO_CMDS - 1) {
- printk(KERN_ERR "DBRI: Command buffer overflow! (bug in driver)\n");
- /* Ignore the last part. */
- cmd = &dbri->dma->cmd[DBRI_NO_CMDS - 3];
- }
+ /* Replace the last command with JUMP */
+ addr = dbri->dma_dvma + (cmd - len - dbri->dma->cmd) * sizeof(s32);
+ *(dbri->cmdptr+1) = addr;
+ *(dbri->cmdptr) = DBRI_CMD(D_JUMP, 0, 0);
- dbri->wait_send++;
- dbri->wait_send &= 0xffff; /* restrict it to a 16 bit counter. */
- *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- *(cmd++) = DBRI_CMD(D_WAIT, 1, dbri->wait_send);
+#ifdef DBRI_DEBUG
+ if (cmd > dbri->cmdptr )
+ for (ptr = dbri->cmdptr; ptr < cmd+2; ptr++) {
+ dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
+ }
+ else {
+ ptr = dbri->cmdptr;
+ dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
+ ptr = dbri->cmdptr+1;
+ dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
+ for (ptr = dbri->dma->cmd; ptr < cmd+2; ptr++) {
+ dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
+ }
+ }
+#endif
- /* Set command pointer and signal it is valid. */
- sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
+ /* Reread the last command */
+ tmp = sbus_readl(dbri->regs + REG0);
+ tmp |= D_P;
+ sbus_writel(tmp, dbri->regs + REG0);
- /*spin_unlock(&dbri->lock); */
+ dbri->cmdptr = cmd;
+ spin_unlock(&dbri->cmdlock);
}
/* Lock must be held when calling this */
/* Lock must not be held before calling this */
static void dbri_initialize(struct snd_dbri * dbri)
{
- volatile s32 *cmd;
+ s32 *cmd;
u32 dma_addr;
unsigned long flags;
int n;
dbri_reset(dbri);
- cmd = dbri_cmdlock(dbri, NoGetLock);
- dprintk(D_GEN, "init: cmd: %p, int: %p\n",
- &dbri->dma->cmd[0], &dbri->dma->intr[0]);
-
/* Initialize pipes */
for (n = 0; n < DBRI_NO_PIPES; n++)
dbri->pipes[n].desc = dbri->pipes[n].first_desc = -1;
+ spin_lock_init(&dbri->cmdlock);
/*
* Initialize the interrupt ringbuffer.
*/
/*
* Set up the interrupt queue
*/
+ spin_lock(&dbri->cmdlock);
+ cmd = dbri->cmdptr = dbri->dma->cmd;
*(cmd++) = DBRI_CMD(D_IIQ, 0, 0);
*(cmd++) = dma_addr;
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+ dbri->cmdptr = cmd;
+ *(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
+ *(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
+ dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0);
+ sbus_writel(dma_addr, dbri->regs + REG8);
+ spin_unlock(&dbri->cmdlock);
+ dbri_cmdwait(dbri);
- dbri_cmdsend(dbri, cmd);
spin_unlock_irqrestore(&dbri->lock, flags);
}
{
int sdp;
int desc;
- volatile int *cmd;
+ s32 *cmd;
if (pipe < 0 || pipe > DBRI_MAX_PIPE) {
printk(KERN_ERR "DBRI: reset_pipe called with illegal pipe number\n");
return;
}
- cmd = dbri_cmdlock(dbri, NoGetLock);
+ cmd = dbri_cmdlock(dbri, 3);
*(cmd++) = DBRI_CMD(D_SDP, 0, sdp | D_SDP_C | D_SDP_P);
*(cmd++) = 0;
- dbri_cmdsend(dbri, cmd);
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+ dbri_cmdsend(dbri, cmd, 3);
desc = dbri->pipes[pipe].first_desc;
- while (desc != -1) {
- dbri->dma->desc[desc].nda = dbri->dma->desc[desc].ba = 0;
- desc = dbri->next_desc[desc];
- }
+ if ( desc >= 0)
+ do {
+ dbri->dma->desc[desc].nda = dbri->dma->desc[desc].ba = 0;
+ desc = dbri->next_desc[desc];
+ } while (desc != -1 && desc != dbri->pipes[pipe].first_desc);
dbri->pipes[pipe].desc = -1;
dbri->pipes[pipe].first_desc = -1;
int prevpipe, int nextpipe,
int length, int cycle)
{
- volatile s32 *cmd;
+ s32 *cmd;
int val;
if (pipe < 0 || pipe > DBRI_MAX_PIPE
}
dbri->pipes[prevpipe].nextpipe = pipe;
-
dbri->pipes[pipe].nextpipe = nextpipe;
dbri->pipes[pipe].length = length;
- cmd = dbri_cmdlock(dbri, NoGetLock);
+ cmd = dbri_cmdlock(dbri, 4);
if (dbri->pipes[pipe].sdp & D_SDP_TO_SER) {
/* Deal with CHI special case:
D_TS_LEN(length) | D_TS_CYCLE(cycle) | D_TS_NEXT(nextpipe);
*(cmd++) = 0;
}
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- dbri_cmdsend(dbri, cmd);
+ dbri_cmdsend(dbri, cmd, 4);
}
static void unlink_time_slot(struct snd_dbri * dbri, int pipe,
enum in_or_out direction, int prevpipe,
int nextpipe)
{
- volatile s32 *cmd;
+ s32 *cmd;
int val;
if (pipe < 0 || pipe > DBRI_MAX_PIPE
- || prevpipe < 0 || prevpipe > DBRI_MAX_PIPE) {
+ || prevpipe < 0 || prevpipe > DBRI_MAX_PIPE
+ || nextpipe < 0 || nextpipe > DBRI_MAX_PIPE) {
printk(KERN_ERR
"DBRI: unlink_time_slot called with illegal pipe number\n");
return;
}
- cmd = dbri_cmdlock(dbri, NoGetLock);
+ cmd = dbri_cmdlock(dbri, 4);
if (direction == PIPEinput) {
val = D_DTS_VI | D_DTS_DEL | D_DTS_PRVIN(prevpipe) | pipe;
*(cmd++) = 0;
*(cmd++) = D_TS_NEXT(nextpipe);
}
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- dbri_cmdsend(dbri, cmd);
+ dbri_cmdsend(dbri, cmd, 4);
}
/* xmit_fixed() / recv_fixed()
*/
static void xmit_fixed(struct snd_dbri * dbri, int pipe, unsigned int data)
{
- volatile s32 *cmd;
+ s32 *cmd;
if (pipe < 16 || pipe > DBRI_MAX_PIPE) {
printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
if (dbri->pipes[pipe].sdp & D_SDP_MSB)
data = reverse_bytes(data, dbri->pipes[pipe].length);
- cmd = dbri_cmdlock(dbri, GetLock);
+ cmd = dbri_cmdlock(dbri, 3);
*(cmd++) = DBRI_CMD(D_SSP, 0, pipe);
*(cmd++) = data;
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- dbri_cmdsend(dbri, cmd);
+ dbri_cmdsend(dbri, cmd, 3);
+ dbri_cmdwait(dbri);
}
static void recv_fixed(struct snd_dbri * dbri, int pipe, volatile __u32 * ptr)
* and work by building chains of descriptors which identify the
* data buffers. Buffers too large for a single descriptor will
* be spread across multiple descriptors.
+ *
+ * All descriptors create a ring buffer.
*/
static int setup_descs(struct snd_dbri * dbri, int streamno, unsigned int period)
{
return -1;
}
- if (len > DBRI_TD_MAXCNT) {
- mylen = DBRI_TD_MAXCNT; /* 8KB - 1 */
- } else {
+ if (len > DBRI_TD_MAXCNT)
+ mylen = DBRI_TD_MAXCNT; /* 8KB - 4 */
+ else
mylen = len;
- }
- if (mylen > period) {
+
+ if (mylen > period)
mylen = period;
- }
dbri->next_desc[desc] = -1;
dbri->dma->desc[desc].ba = dvma_buffer;
if (streamno == DBRI_PLAY) {
dbri->dma->desc[desc].word1 = DBRI_TD_CNT(mylen);
dbri->dma->desc[desc].word4 = 0;
- if (first_desc != -1)
- dbri->dma->desc[desc].word1 |= DBRI_TD_M;
+ dbri->dma->desc[desc].word1 |=
+ DBRI_TD_F | DBRI_TD_B;
} else {
dbri->dma->desc[desc].word1 = 0;
dbri->dma->desc[desc].word4 =
DBRI_RD_B | DBRI_RD_BCNT(mylen);
}
- if (first_desc == -1) {
+ if (first_desc == -1)
first_desc = desc;
- } else {
+ else {
dbri->next_desc[last_desc] = desc;
dbri->dma->desc[last_desc].nda =
dbri->dma_dvma + dbri_dma_off(desc, desc);
return -1;
}
- dbri->dma->desc[last_desc].word1 &= ~DBRI_TD_M;
if (streamno == DBRI_PLAY) {
dbri->dma->desc[last_desc].word1 |=
- DBRI_TD_I | DBRI_TD_F | DBRI_TD_B;
+ DBRI_TD_F | DBRI_TD_B;
+ dbri->dma->desc[last_desc].nda =
+ dbri->dma_dvma + dbri_dma_off(desc, first_desc);
+ dbri->next_desc[last_desc] = first_desc;
}
dbri->pipes[info->pipe].first_desc = first_desc;
dbri->pipes[info->pipe].desc = first_desc;
- for (desc = first_desc; desc != -1; desc = dbri->next_desc[desc]) {
+#ifdef DBRI_DEBUG
+ for (desc = first_desc; desc != -1; ) {
dprintk(D_DESC, "DESC %d: %08x %08x %08x %08x\n",
desc,
dbri->dma->desc[desc].word1,
dbri->dma->desc[desc].ba,
dbri->dma->desc[desc].nda, dbri->dma->desc[desc].word4);
+ desc = dbri->next_desc[desc];
+ if ( desc == first_desc )
+ break;
}
+#endif
return 0;
}
static void reset_chi(struct snd_dbri * dbri, enum master_or_slave master_or_slave,
int bits_per_frame)
{
- volatile s32 *cmd;
+ s32 *cmd;
int val;
- static int chi_initialized = 0; /* FIXME: mutex? */
-
- if (!chi_initialized) {
- cmd = dbri_cmdlock(dbri, GetLock);
+ /* Set CHI Anchor: Pipe 16 */
- /* Set CHI Anchor: Pipe 16 */
-
- val = D_DTS_VO | D_DTS_VI | D_DTS_INS
- | D_DTS_PRVIN(16) | D_PIPE(16) | D_DTS_PRVOUT(16);
- *(cmd++) = DBRI_CMD(D_DTS, 0, val);
- *(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
- *(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
+ cmd = dbri_cmdlock(dbri, 4);
+ val = D_DTS_VO | D_DTS_VI | D_DTS_INS
+ | D_DTS_PRVIN(16) | D_PIPE(16) | D_DTS_PRVOUT(16);
+ *(cmd++) = DBRI_CMD(D_DTS, 0, val);
+ *(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
+ *(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+ dbri_cmdsend(dbri, cmd, 4);
- dbri->pipes[16].sdp = 1;
- dbri->pipes[16].nextpipe = 16;
+ dbri->pipes[16].sdp = 1;
+ dbri->pipes[16].nextpipe = 16;
-#if 0
- chi_initialized++;
-#endif
- } else {
- int pipe;
-
- for (pipe = 0; pipe < DBRI_NO_PIPES; pipe++ )
- if ( pipe != 16 ) {
- if (dbri->pipes[pipe].sdp & D_SDP_TO_SER)
- unlink_time_slot(dbri, pipe, PIPEoutput,
- 16, dbri->pipes[pipe].nextpipe);
- else
- unlink_time_slot(dbri, pipe, PIPEinput,
- 16, dbri->pipes[pipe].nextpipe);
- }
-
- cmd = dbri_cmdlock(dbri, GetLock);
- }
+ cmd = dbri_cmdlock(dbri, 4);
if (master_or_slave == CHIslave) {
/* Setup DBRI for CHI Slave - receive clock, frame sync (FS)
*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
*(cmd++) = DBRI_CMD(D_CDM, 0, D_CDM_XCE | D_CDM_XEN | D_CDM_REN);
+ *(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- dbri_cmdsend(dbri, cmd);
+ dbri_cmdsend(dbri, cmd, 4);
}
/*
setup_pipe(dbri, 17, D_SDP_FIXED | D_SDP_TO_SER | D_SDP_MSB);
setup_pipe(dbri, 18, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
setup_pipe(dbri, 19, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
+
+ dbri_cmdwait(dbri);
}
static int cs4215_init_data(struct cs4215 *mm)
mm->status = 0;
mm->version = 0xff;
mm->precision = 8; /* For ULAW */
- mm->channels = 2;
+ mm->channels = 1;
return 0;
}
}
cs4215_setup_pipes(dbri);
-
cs4215_init_data(&dbri->mm);
/* Enable capture of the status & version timeslots. */
Complicated interrupts are handled by dedicated functions (which
appear first in this file). Any pending interrupts can be serviced by
calling dbri_process_interrupt_buffer(), which works even if the CPU's
-interrupts are disabled. This function is used by dbri_cmdlock()
-to make sure we're synced up with the chip before each command sequence,
-even if we're running cli'ed.
+interrupts are disabled.
*/
* Transmit the current TD's for recording/playing, if needed.
* For playback, ALSA has filled the DMA memory with new data (we hope).
*/
-static void xmit_descs(unsigned long data)
+static void xmit_descs(struct snd_dbri *dbri)
{
- struct snd_dbri *dbri = (struct snd_dbri *) data;
struct dbri_streaminfo *info;
- volatile s32 *cmd;
+ s32 *cmd;
unsigned long flags;
int first_td;
info = &dbri->stream_info[DBRI_REC];
spin_lock_irqsave(&dbri->lock, flags);
- if ((info->left >= info->size) && (info->pipe >= 0)) {
+ if (info->pipe >= 0) {
first_td = dbri->pipes[info->pipe].first_desc;
dprintk(D_DESC, "xmit_descs rec @ TD %d\n", first_td);
goto play;
}
- cmd = dbri_cmdlock(dbri, NoGetLock);
+ cmd = dbri_cmdlock(dbri, 2);
*(cmd++) = DBRI_CMD(D_SDP, 0,
dbri->pipes[info->pipe].sdp
| D_SDP_P | D_SDP_EVERY | D_SDP_C);
*(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
- dbri_cmdsend(dbri, cmd);
+ dbri_cmdsend(dbri, cmd, 2);
/* Reset our admin of the pipe & bytes read. */
dbri->pipes[info->pipe].desc = first_td;
- info->left = 0;
}
play:
info = &dbri->stream_info[DBRI_PLAY];
spin_lock_irqsave(&dbri->lock, flags);
- if ((info->left <= 0) && (info->pipe >= 0)) {
+ if (info->pipe >= 0) {
first_td = dbri->pipes[info->pipe].first_desc;
dprintk(D_DESC, "xmit_descs play @ TD %d\n", first_td);
/* Stream could be closed by the time we run. */
- if (first_td < 0) {
- spin_unlock_irqrestore(&dbri->lock, flags);
- return;
- }
-
- cmd = dbri_cmdlock(dbri, NoGetLock);
- *(cmd++) = DBRI_CMD(D_SDP, 0,
- dbri->pipes[info->pipe].sdp
- | D_SDP_P | D_SDP_EVERY | D_SDP_C);
- *(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
- dbri_cmdsend(dbri, cmd);
+ if (first_td >= 0) {
+ cmd = dbri_cmdlock(dbri, 2);
+ *(cmd++) = DBRI_CMD(D_SDP, 0,
+ dbri->pipes[info->pipe].sdp
+ | D_SDP_P | D_SDP_EVERY | D_SDP_C);
+ *(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
+ dbri_cmdsend(dbri, cmd, 2);
- /* Reset our admin of the pipe & bytes written. */
- dbri->pipes[info->pipe].desc = first_td;
- info->left = info->size;
+ /* Reset our admin of the pipe & bytes written. */
+ dbri->pipes[info->pipe].desc = first_td;
+ }
}
spin_unlock_irqrestore(&dbri->lock, flags);
}
-static DECLARE_TASKLET(xmit_descs_task, xmit_descs, 0);
-
/* transmission_complete_intr()
*
* Called by main interrupt handler when DBRI signals transmission complete
struct dbri_streaminfo *info;
int td;
int status;
- int len;
info = &dbri->stream_info[DBRI_PLAY];
dprintk(D_INT, "TD %d, status 0x%02x\n", td, status);
dbri->dma->desc[td].word4 = 0; /* Reset it for next time. */
- len = DBRI_RD_CNT(dbri->dma->desc[td].word1);
- info->offset += len;
- info->left -= len;
-
- /* On the last TD, transmit them all again. */
- if (dbri->next_desc[td] == -1) {
- if (info->left > 0) {
- printk(KERN_WARNING
- "%d bytes left after last transfer.\n",
- info->left);
- info->left = 0;
- }
- tasklet_schedule(&xmit_descs_task);
- }
+ info->offset += DBRI_RD_CNT(dbri->dma->desc[td].word1);
td = dbri->next_desc[td];
dbri->pipes[pipe].desc = td;
info = &dbri->stream_info[DBRI_REC];
info->offset += DBRI_RD_CNT(status);
- info->left += DBRI_RD_CNT(status);
/* FIXME: Check status */
rd, DBRI_RD_STATUS(status), DBRI_RD_CNT(status));
/* On the last TD, transmit them all again. */
+#if 0
if (dbri->next_desc[rd] == -1) {
if (info->left > info->size) {
printk(KERN_WARNING
}
tasklet_schedule(&xmit_descs_task);
}
+#endif
/* Notify ALSA */
if (spin_is_locked(&dbri->lock)) {
channel, code, rval);
}
- if (channel == D_INTR_CMD && command == D_WAIT) {
- dbri->wait_ackd = val;
- if (dbri->wait_send != val) {
- printk(KERN_ERR "Processing wait command %d when %d was send.\n",
- val, dbri->wait_send);
- }
- return;
- }
-
switch (code) {
+ case D_INTR_CMDI:
+ if (command != D_WAIT)
+ printk(KERN_ERR "DBRI: Command read interrupt\n");
+ break;
case D_INTR_BRDY:
reception_complete_intr(dbri, channel);
break;
* resend SDP command with clear pipe bit (C) set
*/
{
- volatile s32 *cmd;
-
+ /* FIXME: do something useful in case of underrun */
+ printk(KERN_ERR "DBRI: Underrun error\n");
+#if 0
+ s32 *cmd;
int pipe = channel;
int td = dbri->pipes[pipe].desc;
| D_SDP_P | D_SDP_C | D_SDP_2SAME);
*(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, td);
dbri_cmdsend(dbri, cmd);
+#endif
}
break;
case D_INTR_FXDT:
/* dbri_process_interrupt_buffer advances through the DBRI's interrupt
* buffer until it finds a zero word (indicating nothing more to do
* right now). Non-zero words require processing and are handed off
- * to dbri_process_one_interrupt AFTER advancing the pointer. This
- * order is important since we might recurse back into this function
- * and need to make sure the pointer has been advanced first.
+ * to dbri_process_one_interrupt AFTER advancing the pointer.
*/
static void dbri_process_interrupt_buffer(struct snd_dbri * dbri)
{
dbri_process_interrupt_buffer(dbri);
- /* FIXME: Write 0 into regs to ACK interrupt */
-
spin_unlock(&dbri->lock);
return IRQ_HANDLED;
spin_lock_irqsave(&dbri->lock, flags);
info->substream = substream;
- info->left = 0;
info->offset = 0;
info->dvma_buffer = 0;
info->pipe = -1;
dprintk(D_USR, "close audio output.\n");
info->substream = NULL;
- info->left = 0;
info->offset = 0;
return 0;
info->size = snd_pcm_lib_buffer_bytes(substream);
if (DBRI_STREAMNO(substream) == DBRI_PLAY)
info->pipe = 4; /* Send pipe */
- else {
+ else
info->pipe = 6; /* Receive pipe */
- info->left = info->size; /* To trigger submittal */
- }
spin_lock_irq(&dbri->lock);
case SNDRV_PCM_TRIGGER_START:
dprintk(D_USR, "start audio, period is %d bytes\n",
(int)snd_pcm_lib_period_bytes(substream));
- /* Enable & schedule the tasklet that re-submits the TDs. */
- xmit_descs_task.data = (unsigned long)dbri;
- tasklet_schedule(&xmit_descs_task);
+ /* Re-submit the TDs. */
+ xmit_descs(dbri);
break;
case SNDRV_PCM_TRIGGER_STOP:
dprintk(D_USR, "stop audio.\n");
- /* Make the tasklet bail out immediately. */
- xmit_descs_task.data = 0;
reset_pipe(dbri, info->pipe);
break;
default:
ret = bytes_to_frames(substream->runtime, info->offset)
% substream->runtime->buffer_size;
- dprintk(D_USR, "I/O pointer: %ld frames, %d bytes left.\n",
- ret, info->left);
+ dprintk(D_USR, "I/O pointer: %ld frames of %ld.\n",
+ ret, substream->runtime->buffer_size);
return ret;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff