V4L/DVB (11861): saa7134: enable digital tv support for Hauppauge WinTV-HVR1110r3

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 112ff4f..e56934e 100644 (file)
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -154,7 +154,7 @@
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
 155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3                [0070:6707,0070:6709,0070:670a]
+156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid   [0070:6707,0070:6709,0070:670a]
 157 -> Avermedia AVerTV Studio 507UA            [1461:a11b]
 158 -> AVerMedia Cardbus TV/Radio (E501R)       [1461:b7e9]
 159 -> Beholder BeholdTV 505 RDS                [0000:505B]

diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 0ba6898..5bcce09 100644 (file)
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -44,6 +44,7 @@ config VIDEO_SAA7134_DVB
        select DVB_LNBP21 if !DVB_FE_CUSTOMISE
        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
        select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+       select DVB_TDA10048 if !DVB_FE_CUSTOMISE
        select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
        select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
        ---help---

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 0eced41..73482eb 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3364,13 +3364,15 @@ struct saa7134_board saa7134_boards[] = {
                },
        },
        [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
-               .name           = "Hauppauge WinTV-HVR1110r3",
+               .name           = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
                .audio_clock    = 0x00187de7,
                .tuner_type     = TUNER_PHILIPS_TDA8290,
                .radio_type     = UNSET,
                .tuner_addr     = ADDR_UNSET,
                .radio_addr     = ADDR_UNSET,
                .tuner_config   = 3,
+               .mpeg           = SAA7134_MPEG_DVB,
+               .ts_type        = SAA7134_MPEG_TS_SERIAL,
                .gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
                .inputs         = {{
                        .name = name_tv,

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 4eff1ca..31930f2 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -48,6 +48,7 @@
 #include "isl6405.h"
 #include "lnbp21.h"
 #include "tuner-simple.h"
+#include "tda10048.h"
 #include "tda18271.h"
 #include "lgdt3305.h"
 #include "tda8290.h"
@@ -978,6 +979,18 @@ static struct lgdt3305_config hcw_lgdt3305_config = {
        .vsb_if_khz         = 3250,
 };
 
+static struct tda10048_config hcw_tda10048_config = {
+       .demod_address    = 0x10 >> 1,
+       .output_mode      = TDA10048_SERIAL_OUTPUT,
+       .fwbulkwritelen   = TDA10048_BULKWRITE_200,
+       .inversion        = TDA10048_INVERSION_ON,
+       .dtv6_if_freq_khz = TDA10048_IF_3300,
+       .dtv7_if_freq_khz = TDA10048_IF_3500,
+       .dtv8_if_freq_khz = TDA10048_IF_4000,
+       .clk_freq_khz     = TDA10048_CLK_16000,
+       .disable_gate_access = 1,
+};
+
 static struct tda18271_std_map hauppauge_tda18271_std_map = {
        .atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
                      .if_lvl = 1, .rfagc_top = 0x58, },
@@ -1106,6 +1119,19 @@ static int dvb_init(struct saa7134_dev *dev)
                                         &tda827x_cfg_2) < 0)
                        goto dettach_frontend;
                break;
+       case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+               fe0->dvb.frontend = dvb_attach(tda10048_attach,
+                                              &hcw_tda10048_config,
+                                              &dev->i2c_adap);
+               if (fe0->dvb.frontend != NULL) {
+                       dvb_attach(tda829x_attach, fe0->dvb.frontend,
+                                  &dev->i2c_adap, 0x4b,
+                                  &tda829x_no_probe);
+                       dvb_attach(tda18271_attach, fe0->dvb.frontend,
+                                  0x60, &dev->i2c_adap,
+                                  &hcw_tda18271_config);
+               }
+               break;
        case SAA7134_BOARD_PHILIPS_TIGER:
                if (configure_tda827x_fe(dev, &philips_tiger_config,
                                         &tda827x_cfg_0) < 0)