Merge branch 'tmpreg' into devel

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ux500/include/mach/debug-macro.S

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b0c3c0d..7afc615 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -738,14 +738,26 @@ config ARCH_U8500
 
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -760,18 +772,28 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-nuc93x/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-ns9xxx/Kconfig"
+
+source "arch/arm/mach-nuc93x/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -781,9 +803,14 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
@@ -811,41 +838,14 @@ if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
        bool

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3eaef16..52a820d 100644 (file)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)          := mx1
 machine-$(CONFIG_ARCH_MX2)             := mx2
 machine-$(CONFIG_ARCH_MX25)            := mx25
 machine-$(CONFIG_ARCH_MX3)             := mx3
+machine-$(CONFIG_ARCH_MXC91231)                := mxc91231
 machine-$(CONFIG_ARCH_NETX)            := netx
 machine-$(CONFIG_ARCH_NOMADIK)         := nomadik
 machine-$(CONFIG_ARCH_NS9XXX)          := ns9xxx
@@ -172,12 +173,12 @@ machine-$(CONFIG_ARCH_VERSATILE)  := versatile
 machine-$(CONFIG_ARCH_W90X900)         := w90x900
 machine-$(CONFIG_ARCH_NUC93X)          := nuc93x
 machine-$(CONFIG_FOOTBRIDGE)           := footbridge
-machine-$(CONFIG_ARCH_MXC91231)                := mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)                := mxc
 plat-$(CONFIG_ARCH_OMAP)       := omap
+plat-$(CONFIG_ARCH_STMP3XXX)   := stmp3xxx
 plat-$(CONFIG_PLAT_IOP)                := iop
 plat-$(CONFIG_PLAT_NOMADIK)    := nomadik
 plat-$(CONFIG_PLAT_ORION)      := orion
@@ -185,7 +186,6 @@ plat-$(CONFIG_PLAT_PXA)             := pxa
 plat-$(CONFIG_PLAT_S3C24XX)    := s3c24xx s3c samsung
 plat-$(CONFIG_PLAT_S3C64XX)    := s3c64xx s3c samsung
 plat-$(CONFIG_PLAT_S5PC1XX)    := s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX)   := stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d356af7..99b75aa 100644 (file)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,19 +22,27 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #ifdef CONFIG_CPU_V6
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c0, c5, 0
                .endm
+#elif defined(CONFIG_CPU_V7)
+               .macro  loadsp, rb, tmp
+               .endm
+               .macro  writeb, ch, rb
+wait:          mrc     p14, 0, pc, c0, c1, 0
+               bcs     wait
+               mcr     p14, 0, \ch, c0, c5, 0
+               .endm
 #elif defined(CONFIG_CPU_XSCALE)
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c8, c0, 0
                .endm
 #else
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                .endm
                .macro  writeb, ch, rb
                mcr     p14, 0, \ch, c1, c0, 0
@@ -50,7 +58,7 @@
                .endm
 
 #if defined(CONFIG_ARCH_SA1100)
-               .macro  loadsp, rb
+               .macro  loadsp, rb, tmp
                mov     \rb, #0x80000000        @ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
                add     \rb, \rb, #0x00050000   @ Ser3
@@ -59,13 +67,13 @@
 #endif
                .endm
 #elif defined(CONFIG_ARCH_S3C2410)
-               .macro loadsp, rb
+               .macro loadsp, rb, tmp
                mov     \rb, #0x50000000
                add     \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
                .endm
 #else
-               .macro  loadsp, rb
-               addruart \rb
+               .macro  loadsp, rb, tmp
+               addruart \rb, \tmp
                .endm
 #endif
 #endif
@@ -1017,7 +1025,7 @@ phex:             adr     r3, phexbuf
                strb    r2, [r3, r1]
                b       1b
 
-puts:          loadsp  r3
+puts:          loadsp  r3, r1
 1:             ldrb    r2, [r0], #1
                teq     r2, #0
                moveq   pc, lr
@@ -1034,7 +1042,7 @@ puts:             loadsp  r3
 putc:
                mov     r2, r0
                mov     r0, #0
-               loadsp  r3
+               loadsp  r3, r1
                b       2b
 
 memdump:       mov     r12, r0

diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7e0fe4d..56a0d11 100644 (file)
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -53,6 +53,18 @@ static void icedcc_putc(int ch)
 
        asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+       asm(
+       "wait:  mrc     p14, 0, pc, c0, c1, 0                   \n\
+               bcs     wait                                    \n\
+               mcr     p14, 0, %0, c0, c5, 0                   "
+       : : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -88,7 +100,6 @@ static void icedcc_putc(int ch)
 #endif
 
 #define putc(ch)       icedcc_putc(ch)
-#define flush()        do { } while (0)
 #endif
 
 static void putstr(const char *ptr)

diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index b121b60..a38b487 100644 (file)
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
 
 #if defined(CONFIG_CPU_V6)
 
-               .macro  addruart, rx
+               .macro  addruart, rx, tmp
                .endm
 
                .macro  senduart, rd, rx
@@ -49,9 +49,29 @@
 1002:
                .endm
 
+#elif defined(CONFIG_CPU_V7)
+
+               .macro  addruart, rx, tmp
+               .endm
+
+               .macro  senduart, rd, rx
+               mcr     p14, 0, \rd, c0, c5, 0
+               .endm
+
+               .macro  busyuart, rd, rx
+busy:          mrc     p14, 0, pc, c0, c1, 0
+               bcs     busy
+               .endm
+
+               .macro  waituart, rd, rx
+wait:          mrc     p14, 0, pc, c0, c1, 0
+               bcs     wait
+
+               .endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
-               .macro  addruart, rx
+               .macro  addruart, rx, tmp
                .endm
 
                .macro  senduart, rd, rx
@@ -78,7 +98,7 @@
 
 #else
 
-               .macro  addruart, rx
+               .macro  addruart, rx, tmp
                .endm
 
                .macro  senduart, rd, rx
@@ -144,7 +164,7 @@ ENDPROC(printhex2)
                .ltorg
 
 ENTRY(printascii)
-               addruart r3
+               addruart r3, r1
                b       2f
 1:             waituart r2, r3
                senduart r1, r3
@@ -160,7 +180,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-               addruart r3
+               addruart r3, r1
                mov     r1, r0
                mov     r0, #0
                b       1b

diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 950391f..d4a0da1 100644 (file)
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
                return 1;
        if (cpu_architecture() < CPU_ARCH_ARMv6)
                return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-       /*
-        * If we have support for OABI programs, we can never allow NX
-        * support - our signal syscall restart mechanism relies upon
-        * being able to execute code placed on the user stack.
-        */
-       return 1;
-#else
        return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);

diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 0b6351d..a9cac36 100644 (file)
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 
 #include "hardware.h"
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x80000000                @ physical

diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 29052ba..9e750a1 100644 (file)
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                         @ MMU enabled?
        ldreq   \rx, =(AT91_BASE_SYS + AT91_DBGU)               @ System peripherals (phys address)

diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 64baf9f..fedd807 100644 (file)
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include <asm/hardware/clps7111.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #CLPS7111_PHYS_BASE

diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 17ab523..3cd93a8 100644 (file)
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #include <linux/serial_reg.h>
 #define UART_SHIFT     2
 
-               .macro addruart, rx
+               .macro addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x01000000        @ physical base address

diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 9b89ec7..1521d13 100644 (file)
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =DOVE_SB_REGS_PHYS_BASE

diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 1dde822..ebbd89f 100644 (file)
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mov     \rx, #0xf0000000
                orr     \rx, \rx, #0x00000be0
                .endm

diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 802858b..5cd2244 100644 (file)
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                         @ MMU enabled?
                ldreq   \rx, =EP93XX_APB_PHYS_BASE      @ Physical base

diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 4329b81..60dda13 100644 (file)
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
        /* For NetWinder debugging */
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x7c000000        @ physical
@@ -32,7 +32,7 @@
                .equ    dc21285_high, ARMCSR_BASE & 0xff000000
                .equ    dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x42000000

diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index d04a6ea..ad47704 100644 (file)
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =GEMINI_UART_BASE                  @ physical

diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 59c5df7..5483f61 100644 (file)
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -30,7 +30,9 @@ static inline void putc(char c)
        UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do

diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 6294a13..a9ee8f0 100644 (file)
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
                .equ    io_virt, IO_BASE
                .equ    io_phys, IO_START
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                @ MMU enabled?
                moveq   \rx, #io_phys          @ physical base address

diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index d347d65..87a6888 100644 (file)
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x16000000        @ physical base address

diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 9037d2e..c9d6ba4 100644 (file)
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-       .macro  addruart, rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                 @ mmu enabled?
        moveq   \rx, #0xff000000        @ physical

diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 58b0166..736afe1 100644 (file)
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-               .macro  addruart, rx
+               .macro  addruart, rx, tmp
                mov     \rx, #0xfe000000        @ physical as well as virtual
                orr     \rx, \rx, #0x00800000   @ location of the UART
                .endm

diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index a60c9ef..addb2da 100644 (file)
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-               .macro  addruart, rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ mmu enabled?
                moveq   \rx, #0xff000000        @ physical

diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 904ff56..6a82768 100644 (file)
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0xc0000000        @ Physical base

diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 905db31..a82e375 100644 (file)
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                         @ mmu enabled?
                ldreq   \rx, =IXP23XX_PERIPHERAL_PHYS   @ physical

diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 7c6a691..893873e 100644 (file)
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart,rx
+                .macro  addruart, rx, tmp
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000

diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c1..d060677 100644 (file)
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =KIRKWOOD_REGS_PHYS_BASE

diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index 3782c35..cf2095d 100644 (file)
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-       .macro  addruart, rx
+       .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                         @ MMU enabled?
                ldreq   \rx, =KS8695_UART_PA            @ physical base address

diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 34eed2a..b69ed34 100644 (file)
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
                .equ    io_virt, IO_BASE
                .equ    io_phys, IO_START
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #io_phys           @ physical base address

diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 85141ed..c0dcbbb 100644 (file)
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
        @ It is not known if this will be appropriate for every 40x
        @ board.
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                mov     \rx, #0x00000700        @ offset from base

diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index a8c20bd..3136c91 100644 (file)
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/loki.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =LOKI_REGS_PHYS_BASE

diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index a850f87..76deff2 100644 (file)
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                         @ MMU enabled?
                ldreq   \rx, =APB_PHYS_BASE             @ physical

diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index d48747e..528750f 100644 (file)
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #ifdef CONFIG_MSM_DEBUG_UART
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        @ see if the MMU is enabled and select appropriate base address
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1
@@ -40,7 +40,7 @@
        beq     1001b
        .endm
 #else
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        .endm
 
        .macro  senduart,rd,rx

diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index a06442f..cd81689 100644 (file)
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =MV78XX0_REGS_PHYS_BASE

diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 11b9d5b..e96339e 100644 (file)
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x00100000                @ physical

diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e876990..4f92acf 100644 (file)
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x10000000        @ physical base address

diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index c9530fb..0859336 100644 (file)
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1
                ldreq   \rx, =NS9XXX_CSxSTAT_PHYS(0)

diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746..8c74cab 100644 (file)
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0xff000000        @ physical base address

diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255d..86979d7 100644 (file)
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
 #ifdef  CONFIG_ARCH_OMAP2

diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index c7f808b..91e0e39 100644 (file)
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =ORION5X_REGS_PHYS_BASE

diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f..6ca8bd3 100644 (file)
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                mov     \rx, #0x00090000

diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 55d6a17..01cf813 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x40000000                @ physical

diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 932d8af..8662228 100644 (file)
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx,      #0x10000000

diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index b2a939f..6fc8d66 100644 (file)
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x03000000

diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4c29a89..0eef78b 100644 (file)
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-       .macro addruart, rx
+       .macro addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1
                ldreq   \rx, = S3C24XX_PA_UART

diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index f0ef0ab..239476b 100644 (file)
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-       .macro addruart, rx
+       .macro addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1
                ldreq   \rx, = S3C24XX_PA_UART

diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
index b18ac52..5c88875 100644 (file)
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rx
+       .macro addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1
                ldreq   \rx, = S3C_PA_UART

diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 9d142cc..e181f57 100644 (file)
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rx
+       .macro addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1
                ldreq   \rx, = S3C_PA_UART

diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d..336adcc 100644 (file)
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x80000000        @ physical base address

diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index f97a762..50f071c 100644 (file)
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mov     \rx, #0xe0000000
                orr     \rx, \rx, #0x000003f8
                .endm

diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..ca4a028 100644 (file)
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        /* If we move the adress using MMU, use this. */
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                 @ MMU enabled?

diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8de225e..09cbfda 100644 (file)
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-       .macro  addruart,rx
+       .macro  addruart, rx, tmp
        mrc     p15, 0, \rx, c1, c0
        tst     \rx, #1                                 @ MMU enabled?
        ldreq   \rx, =U8500_UART2_BASE                  @ no, physical address

diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index b4ac00e..6fea719 100644 (file)
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx,      #0x10000000

diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b14..5a6ae1b 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -52,7 +52,7 @@
 #define UART_PADDR     MXC91231_UART2_BASE_ADDR
 #define UART_VADDR     MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                ldreq   \rx, =UART_PADDR        @ physical

diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 4d5d395..d49384c 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -60,7 +60,9 @@ static void putc(int ch)
        UART(TXR) = ch;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 #define MX1_UART1_BASE_ADDR    0x00206000
 #define MX25_UART1_BASE_ADDR   0x43f90000

diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index fb3b969..1b9348b 100644 (file)
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-               .macro  addruart,rx
+               .macro  addruart, rx, tmp
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x80000000        @ physical base address