+ * Handle the detection and initialisation of a card.
+ *
+ * In the case of a resume, "oldcard" will contain the card
+ * we're trying to reinitialise.
+ */
+static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
+ struct mmc_card *oldcard)
+{
+ struct mmc_card *card;
+ int err;
+
+ BUG_ON(!host);
+ WARN_ON(!host->claimed);
+
+ /*
+ * Inform the card of the voltage
+ */
+ err = mmc_send_io_op_cond(host, host->ocr, &ocr);
+ if (err)
+ goto err;
+
+ /*
+ * For SPI, enable CRC as appropriate.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto err;
+ }
+
+ /*
+ * Allocate card structure.
+ */
+ card = mmc_alloc_card(host, NULL);
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto err;
+ }
+
+ card->type = MMC_TYPE_SDIO;
+
+ /*
+ * For native busses: set card RCA and quit open drain mode.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_send_relative_addr(host, &card->rca);
+ if (err)
+ goto remove;
+
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
+
+ /*
+ * Select card, as all following commands rely on that.
+ */
+ if (!mmc_host_is_spi(host)) {
+ err = mmc_select_card(card);
+ if (err)
+ goto remove;
+ }
+
+ /*
+ * Read the common registers.
+ */
+ err = sdio_read_cccr(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Read the common CIS tuples.
+ */
+ err = sdio_read_common_cis(card);
+ if (err)
+ goto remove;
+
+ if (oldcard) {
+ int same = (card->cis.vendor == oldcard->cis.vendor &&
+ card->cis.device == oldcard->cis.device);
+ mmc_remove_card(card);
+ if (!same) {
+ err = -ENOENT;
+ goto err;
+ }
+ card = oldcard;
+ }
+
+ /*
+ * Switch to high-speed (if supported).
+ */
+ err = sdio_enable_hs(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Change to the card's maximum speed.
+ */
+ if (mmc_card_highspeed(card)) {
+ /*
+ * The SDIO specification doesn't mention how
+ * the CIS transfer speed register relates to
+ * high-speed, but it seems that 50 MHz is
+ * mandatory.
+ */
+ mmc_set_clock(host, 50000000);
+ } else {
+ mmc_set_clock(host, card->cis.max_dtr);
+ }
+
+ /*
+ * Switch to wider bus (if supported).
+ */
+ err = sdio_enable_wide(card);
+ if (err)
+ goto remove;
+
+ if (!oldcard)
+ host->card = card;
+ return 0;
+
+remove:
+ if (!oldcard)
+ mmc_remove_card(card);
+
+err:
+ return err;
+}
+
+/*