This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two.
The code is now passing the checkpatch-script.
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
-
ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),)
b2c2-flexcop-objs += flexcop-dma.o
endif
/* Steal from usb.h */
#undef err
-#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define err(format, arg...) \
+ printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef info
-#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
#undef warn
-#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
struct flexcop_dma {
struct pci_dev *pdev;
int fullts_streaming_state;
/* bus specific callbacks */
- flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register);
- int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
-
-
- int (*i2c_request) (struct flexcop_i2c_adapter*,
+ flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *,
+ flexcop_ibi_register);
+ int (*write_ibi_reg) (struct flexcop_device *,
+ flexcop_ibi_register, flexcop_ibi_value);
+ int (*i2c_request) (struct flexcop_i2c_adapter *,
flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
- int (*stream_control) (struct flexcop_device*, int);
-
+ int (*stream_control) (struct flexcop_device *, int);
int (*get_mac_addr) (struct flexcop_device *fc, int extended);
-
void *bus_specific;
};
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
-void flexcop_device_kfree(struct flexcop_device*);
+void flexcop_device_kfree(struct flexcop_device *);
-int flexcop_device_initialize(struct flexcop_device*);
+int flexcop_device_initialize(struct flexcop_device *);
void flexcop_device_exit(struct flexcop_device *fc);
-
void flexcop_reset_block_300(struct flexcop_device *fc);
/* from flexcop-dma.c */
-int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
+int flexcop_dma_allocate(struct pci_dev *pdev,
+ struct flexcop_dma *dma, u32 size);
void flexcop_dma_free(struct flexcop_dma *dma);
-int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
-int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
-int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_size_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no, int onoff);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma,
+ flexcop_dma_index_t dma_idx);
+int flexcop_dma_xfer_control(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index,
+ int onoff);
+int flexcop_dma_config_timer(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx, u8 cycles);
/* from flexcop-eeprom.c */
/* the PCI part uses this call to get the MAC address, the USB part has its own */
u8 chipaddr, u8 addr, u8 *buf, u16 len);
/* from flexcop-sram.c */
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+ flexcop_sram_dest_target_t target);
void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
-void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill);
+void flexcop_sram_ctrl(struct flexcop_device *fc,
+ int usb_wan, int sramdma, int maximumfill);
/* global prototypes for the flexcop-chip */
/* from flexcop-fe-tuner.c */
-int flexcop_frontend_init(struct flexcop_device *card);
+int flexcop_frontend_init(struct flexcop_device *fc);
void flexcop_frontend_exit(struct flexcop_device *fc);
/* from flexcop-i2c.c */
/* from flexcop-misc.c */
void flexcop_determine_revision(struct flexcop_device *fc);
-void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
-void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num);
+void flexcop_device_name(struct flexcop_device *fc,
+ const char *prefix, const char *suffix);
+void flexcop_dump_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, int num);
/* from flexcop-hw-filter.c */
-int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+ struct dvb_demux_feed *dvbdmxfeed, int onoff);
void flexcop_hw_filter_init(struct flexcop_device *fc);
void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-dma.c - configuring and controlling the DMA of the FlexCop
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
-int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
+int flexcop_dma_allocate(struct pci_dev *pdev,
+ struct flexcop_dma *dma, u32 size)
{
u8 *tcpu;
dma_addr_t tdma = 0;
void flexcop_dma_free(struct flexcop_dma *dma)
{
- pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0);
+ pci_free_consistent(dma->pdev, dma->size*2,
+ dma->cpu_addr0, dma->dma_addr0);
memset(dma,0,sizeof(struct flexcop_dma));
}
EXPORT_SYMBOL(flexcop_dma_free);
flexcop_ibi_value v0x0,v0x4,v0xc;
v0x0.raw = v0x4.raw = v0xc.raw = 0;
- v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
- v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
+ v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
+ v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
if ((dma_idx & FC_DMA_1) == dma_idx) {
fc->write_ibi_reg(fc,dma2_014,v0x4);
fc->write_ibi_reg(fc,dma2_01c,v0xc);
} else {
- err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call.");
+ err("either DMA1 or DMA2 can be configured within one "
+ "flexcop_dma_config call.");
return -EINVAL;
}
r0x0 = dma2_010;
r0xc = dma2_01c;
} else {
- err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call.");
+ err("either transfer DMA1 or DMA2 can be started within one "
+ "flexcop_dma_xfer_control call.");
return -EINVAL;
}
/* 1 cycles = 1.97 msec */
int flexcop_dma_config_timer(struct flexcop_device *fc,
- flexcop_dma_index_t dma_idx,
- u8 cycles)
+ flexcop_dma_index_t dma_idx, u8 cycles)
{
flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
}
-static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
+ u32 len, u8 *wbuf, u8 *rbuf, int retries)
{
- int i;
+int i;
- for (i = 0; i < retries; i++) {
- if (eeprom_write(adapter, addr, wbuf, len) == len) {
- if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
- return 1;
+for (i = 0; i < retries; i++) {
+ if (eeprom_write(adapter, addr, wbuf, len) == len) {
+ if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+ return 1;
}
}
-
return 0;
}
return 0;
memcpy(wbuf, key, len);
-
wbuf[16] = 0;
wbuf[17] = 0;
wbuf[18] = 0;
wbuf[19] = calc_lrc(wbuf, 19);
-
return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
}
return 0;
memcpy(key, buf, len);
-
return 1;
}
tmp[3] = mac[5];
tmp[4] = mac[6];
tmp[5] = mac[7];
-
} else {
-
tmp[0] = mac[0];
tmp[1] = mac[1];
tmp[2] = mac[2];
if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
return 1;
-
return 0;
}
-static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
+static int flexcop_eeprom_read(struct flexcop_device *fc,
+ u16 addr, u8 *buf, u16 len)
{
return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
}
return sum;
}
-static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+static int flexcop_eeprom_request(struct flexcop_device *fc,
+ flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
{
int i,ret = 0;
u8 chipaddr = 0x50 | ((addr >> 8) & 3);
return ret;
}
-static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
+ u8 *buf, u16 len, int retries)
{
int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
if (ret == 0)
}
/* JJ's comment about extended == 1: it is not presently used anywhere but was
- * added to the low-level functions for possible support of EUI64
- */
+ * added to the low-level functions for possible support of EUI64 */
int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
{
u8 buf[8];
if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
if (extended != 0) {
- err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
+ err("TODO: extended (EUI64) MAC addresses aren't "
+ "completely supported yet");
ret = -EINVAL;
-/* memcpy(fc->dvb_adapter.proposed_mac,buf,3);
- mac[3] = 0xfe;
- mac[4] = 0xff;
- memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
} else
memcpy(fc->dvb_adapter.proposed_mac,buf,6);
}
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
- fc->dev_type = FC_SKY;
+ fc->dev_type = FC_SKY_REV26;
goto fe_found;
}
/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
if (fc->fe != NULL) {
- fc->dev_type = FC_AIR_DVB;
+ fc->dev_type = FC_AIR_DVBT;
fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
goto fe_found;
}
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
- fc->dev_type = FC_SKY_OLD;
+ fc->dev_type = FC_SKY_REV23;
goto fe_found;
}
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-hw-filter.c - pid and mac address filtering and control functions
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
{
- flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
-
- deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off");
+ flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff);
+ deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off");
}
void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
{
- flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff);
+ flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff);
}
static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
{
- flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff);
+ flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff);
}
void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
{
- flexcop_ibi_value v418,v41c;
- v41c = fc->read_ibi_reg(fc,mac_address_41c);
+ flexcop_ibi_value v418, v41c;
+ v41c = fc->read_ibi_reg(fc, mac_address_41c);
v418.mac_address_418.MAC1 = mac[0];
v418.mac_address_418.MAC2 = mac[1];
v41c.mac_address_41c.MAC7 = mac[4];
v41c.mac_address_41c.MAC8 = mac[5];
- fc->write_ibi_reg(fc,mac_address_418,v418);
- fc->write_ibi_reg(fc,mac_address_41c,v41c);
+ fc->write_ibi_reg(fc, mac_address_418, v418);
+ fc->write_ibi_reg(fc, mac_address_41c, v41c);
}
void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
{
- flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff);
+ flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff);
}
-static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask)
+static void flexcop_pid_group_filter(struct flexcop_device *fc,
+ u16 pid, u16 mask)
{
/* index_reg_310.extra_index_reg need to 0 or 7 to work */
flexcop_ibi_value v30c;
v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
- fc->write_ibi_reg(fc,pid_filter_30c,v30c);
+ fc->write_ibi_reg(fc, pid_filter_30c, v30c);
}
static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
{
- flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff);
+ flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff);
}
/* this fancy define reduces the code size of the quite similar PID controlling of
#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
- v208 = fc->read_ibi_reg(fc, ctrl_208); \
-\
- vpid.vregname.field = onoff ? pid : 0x1fff; \
- vpid.vregname.trans_field = transval; \
- v208.ctrl_208.enablefield = onoff; \
-\
- fc->write_ibi_reg(fc,vregname,vpid); \
- fc->write_ibi_reg(fc,ctrl_208,v208);
+v208 = fc->read_ibi_reg(fc, ctrl_208); \
+vpid.vregname.field = onoff ? pid : 0x1fff; \
+vpid.vregname.trans_field = transval; \
+v208.ctrl_208.enablefield = onoff; \
+fc->write_ibi_reg(fc, vregname, vpid); \
+fc->write_ibi_reg(fc, ctrl_208, v208);
-static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0);
+ pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig,
+ Stream1_trans, 0);
}
-static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0);
+ pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig,
+ Stream2_trans, 0);
}
-static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0);
+ pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0);
}
-static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0);
+ pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0);
}
-static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0);
+ pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0);
}
-static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff)
+static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
{
- pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0);
+ pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0);
}
-static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff)
+static void flexcop_pid_control(struct flexcop_device *fc,
+ int index, u16 pid, int onoff)
{
if (pid == 0x2000)
return;
- deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off");
+ deb_ts("setting pid: %5d %04x at index %d '%s'\n",
+ pid, pid, index, onoff ? "on" : "off");
/* We could use bit magic here to reduce source code size.
* I decided against it, but to use the real register names */
switch (index) {
- case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break;
- case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break;
- case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break;
- case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break;
- case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break;
- case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break;
- default:
- if (fc->has_32_hw_pid_filter && index < 38) {
- flexcop_ibi_value vpid,vid;
-
- /* set the index */
- vid = fc->read_ibi_reg(fc,index_reg_310);
- vid.index_reg_310.index_reg = index - 6;
- fc->write_ibi_reg(fc,index_reg_310, vid);
-
- vpid = fc->read_ibi_reg(fc,pid_n_reg_314);
- vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
- vpid.pid_n_reg_314.PID_enable_bit = onoff;
- fc->write_ibi_reg(fc,pid_n_reg_314, vpid);
- }
- break;
+ case 0:
+ flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff);
+ break;
+ case 1:
+ flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff);
+ break;
+ case 2:
+ flexcop_pid_PCR_PID_ctrl(fc, pid, onoff);
+ break;
+ case 3:
+ flexcop_pid_PMT_PID_ctrl(fc, pid, onoff);
+ break;
+ case 4:
+ flexcop_pid_EMM_PID_ctrl(fc, pid, onoff);
+ break;
+ case 5:
+ flexcop_pid_ECM_PID_ctrl(fc, pid, onoff);
+ break;
+ default:
+ if (fc->has_32_hw_pid_filter && index < 38) {
+ flexcop_ibi_value vpid, vid;
+
+ /* set the index */
+ vid = fc->read_ibi_reg(fc, index_reg_310);
+ vid.index_reg_310.index_reg = index - 6;
+ fc->write_ibi_reg(fc, index_reg_310, vid);
+
+ vpid = fc->read_ibi_reg(fc, pid_n_reg_314);
+ vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
+ vpid.pid_n_reg_314.PID_enable_bit = onoff;
+ fc->write_ibi_reg(fc, pid_n_reg_314, vpid);
+ }
+ break;
}
}
-static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff)
+static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff)
{
if (fc->fullts_streaming_state != onoff) {
deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
- flexcop_pid_group_filter_ctrl(fc,onoff);
+ flexcop_pid_group_filter_ctrl(fc, onoff);
fc->fullts_streaming_state = onoff;
}
return 0;
}
-int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff)
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+ struct dvb_demux_feed *dvbdmxfeed, int onoff)
{
int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
* - or the requested pid is 0x2000 */
if (!fc->pid_filtering && fc->feedcount == onoff)
- flexcop_toggle_fullts_streaming(fc,onoff);
+ flexcop_toggle_fullts_streaming(fc, onoff);
if (fc->pid_filtering) {
- flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff);
+ flexcop_pid_control \
+ (fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
if (fc->extra_feedcount > 0)
- flexcop_toggle_fullts_streaming(fc,1);
+ flexcop_toggle_fullts_streaming(fc, 1);
else if (dvbdmxfeed->pid == 0x2000)
- flexcop_toggle_fullts_streaming(fc,onoff);
+ flexcop_toggle_fullts_streaming(fc, onoff);
else
- flexcop_toggle_fullts_streaming(fc,0);
+ flexcop_toggle_fullts_streaming(fc, 0);
}
/* if it was the first or last feed request change the stream-status */
if (fc->feedcount == onoff) {
- flexcop_rcv_data_ctrl(fc,onoff);
+ flexcop_rcv_data_ctrl(fc, onoff);
if (fc->stream_control) /* device specific stream control */
- fc->stream_control(fc,onoff);
+ fc->stream_control(fc, onoff);
/* feeding stopped -> reset the flexcop filter*/
if (onoff == 0) {
flexcop_hw_filter_init(fc);
}
}
-
return 0;
}
EXPORT_SYMBOL(flexcop_pid_feed_control);
int i;
flexcop_ibi_value v;
for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
- flexcop_pid_control(fc,i,0x1fff,0);
+ flexcop_pid_control(fc, i, 0x1fff, 0);
flexcop_pid_group_filter(fc, 0, 0x1fe0);
- flexcop_pid_group_filter_ctrl(fc,0);
+ flexcop_pid_group_filter_ctrl(fc, 0);
- v = fc->read_ibi_reg(fc,pid_filter_308);
+ v = fc->read_ibi_reg(fc, pid_filter_308);
v.pid_filter_308.EMM_filter_4 = 1;
v.pid_filter_308.EMM_filter_6 = 0;
- fc->write_ibi_reg(fc,pid_filter_308,v);
+ fc->write_ibi_reg(fc, pid_filter_308, v);
flexcop_null_filter_ctrl(fc, 1);
}
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
#define FC_MAX_I2C_RETRIES 100000
-/* #define DUMP_I2C_MESSAGES */
-
-static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
+static int flexcop_i2c_operation(struct flexcop_device *fc,
+ flexcop_ibi_value *r100)
{
int i;
flexcop_ibi_value r;
r = fc->read_ibi_reg(fc, tw_sm_c_100);
if (!r.tw_sm_c_100.no_base_addr_ack_error) {
- if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */
+ if (r.tw_sm_c_100.st_done) {
*r100 = r;
deb_i2c("i2c success\n");
return 0;
return -EREMOTEIO;
}
}
- deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
+ deb_i2c("tried %d times i2c operation, "
+ "never finished or too many ack errors.\n", i);
return -EREMOTEIO;
}
static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
- flexcop_ibi_value r100, u8 *buf)
+ flexcop_ibi_value r100, u8 *buf)
{
flexcop_ibi_value r104;
- int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
+ int len = r100.tw_sm_c_100.total_bytes,
+ /* remember total_bytes is buflen-1 */
ret;
/* work-around to have CableStar2 and SkyStar2 rev 2.7 work
if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
}
-
return 0;
}
-static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+static int flexcop_i2c_write4(struct flexcop_device *fc,
+ flexcop_ibi_value r100, u8 *buf)
{
flexcop_ibi_value r104;
int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
/* there is at least one byte, otherwise we wouldn't be here */
r100.tw_sm_c_100.data1_reg = buf[0];
-
r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
}
int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
- flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+ flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
{
int ret;
printk("rd(");
else
printk("wr(");
-
printk("%02x): %02x ", chipaddr, addr);
#endif
EXPORT_SYMBOL(flexcop_i2c_request);
/* master xfer callback for demodulator */
-static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
{
struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
int i, ret = 0;
/* reading */
if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
- msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
+ msgs[i].buf[0], msgs[i+1].buf,
+ msgs[i+1].len);
i++; /* skip the following message */
} else /* writing */
ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
- msgs[i].buf[0], &msgs[i].buf[1],
- msgs[i].len - 1);
+ msgs[i].buf[0], &msgs[i].buf[1],
+ msgs[i].len - 1);
if (ret < 0) {
err("i2c master_xfer failed");
break;
int flexcop_i2c_init(struct flexcop_device *fc)
{
int ret;
-
mutex_init(&fc->i2c_mutex);
fc->fc_i2c_adap[0].fc = fc;
fc->fc_i2c_adap[1].fc = fc;
fc->fc_i2c_adap[2].fc = fc;
-
fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
- sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
- sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
- sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
adap_1_failed:
i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
-
return ret;
}
i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
}
-
fc->init_state &= ~FC_STATE_I2C_INIT;
}
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-misc.c - miscellaneous functions.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-misc.c - miscellaneous functions
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
switch (v.misc_204.Rev_N_sig_revision_hi) {
- case 0x2:
- deb_info("found a FlexCopII.\n");
- fc->rev = FLEXCOP_II;
- break;
- case 0x3:
- deb_info("found a FlexCopIIb.\n");
- fc->rev = FLEXCOP_IIB;
- break;
- case 0x0:
- deb_info("found a FlexCopIII.\n");
- fc->rev = FLEXCOP_III;
- break;
- default:
- err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi);
- break;
+ case 0x2:
+ deb_info("found a FlexCopII.\n");
+ fc->rev = FLEXCOP_II;
+ break;
+ case 0x3:
+ deb_info("found a FlexCopIIb.\n");
+ fc->rev = FLEXCOP_IIB;
+ break;
+ case 0x0:
+ deb_info("found a FlexCopIII.\n");
+ fc->rev = FLEXCOP_III;
+ break;
+ default:
+ err("unknown FlexCop Revision: %x. Please report this to "
+ "linux-dvb@linuxtv.org.",
+ v.misc_204.Rev_N_sig_revision_hi);
+ break;
}
if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
- deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
+ deb_info("this FlexCop has "
+ "the additional 32 hardware pid filter.\n");
else
- deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n");
+ deb_info("this FlexCop has "
+ "the 6 basic main hardware pid filter.\n");
/* bus parts have to decide if hw pid filtering is used or not. */
}
static const char *flexcop_revision_names[] = {
- "Unkown chip",
+ "Unknown chip",
"FlexCopII",
"FlexCopIIb",
"FlexCopIII",
};
static const char *flexcop_device_names[] = {
- "Unkown device",
+ "Unknown device",
"Air2PC/AirStar 2 DVB-T",
"Air2PC/AirStar 2 ATSC 1st generation",
"Air2PC/AirStar 2 ATSC 2nd generation",
"PCI",
};
-void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const
- char *suffix)
+void flexcop_device_name(struct flexcop_device *fc,
+ const char *prefix, const char *suffix)
{
- info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix,
- flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
- flexcop_revision_names[fc->rev],suffix);
+ info("%s '%s' at the '%s' bus controlled by a '%s' %s",
+ prefix, flexcop_device_names[fc->dev_type],
+ flexcop_bus_names[fc->bus_type],
+ flexcop_revision_names[fc->rev], suffix);
}
-void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num)
+void flexcop_dump_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, int num)
{
flexcop_ibi_value v;
int i;
for (i = 0; i < num; i++) {
- v = fc->read_ibi_reg(fc,reg+4*i);
- deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw);
+ v = fc->read_ibi_reg(fc, reg+4*i);
+ deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw);
}
deb_rdump("\n");
}
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
*/
#ifndef __FLEXCOP_REG_H__
#define __FLEXCOP_REG_H__
-
typedef enum {
FLEXCOP_UNK = 0,
FLEXCOP_II,
typedef enum {
FC_UNK = 0,
- FC_AIR_DVB,
+ FC_CABLE,
+ FC_AIR_DVBT,
FC_AIR_ATSC1,
FC_AIR_ATSC2,
- FC_SKY,
- FC_SKY_OLD,
- FC_CABLE,
FC_AIR_ATSC3,
+ FC_SKY_REV23,
+ FC_SKY_REV26,
FC_SKY_REV27,
FC_SKY_REV28,
} flexcop_device_type_t;
/* FlexCop IBI Registers */
#if defined(__LITTLE_ENDIAN)
- #include "flexcop_ibi_value_le.h"
+#include "flexcop_ibi_value_le.h"
#else
#if defined(__BIG_ENDIAN)
- #include "flexcop_ibi_value_be.h"
+#include "flexcop_ibi_value_be.h"
#else
- #error no endian defined
+#error no endian defined
#endif
#endif
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-sram.c - functions for controlling the SRAM.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-sram.c - functions for controlling the SRAM
+ * see flexcop.c for copyright information
*/
#include "flexcop.h"
-static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type)
+static void flexcop_sram_set_chip(struct flexcop_device *fc,
+ flexcop_sram_type_t type)
{
- flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type);
+ flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type);
}
int flexcop_sram_init(struct flexcop_device *fc)
{
switch (fc->rev) {
- case FLEXCOP_II:
- case FLEXCOP_IIB:
- flexcop_sram_set_chip(fc,FC_SRAM_1_32KB);
- break;
- case FLEXCOP_III:
- flexcop_sram_set_chip(fc,FC_SRAM_1_48KB);
- break;
- default:
- return -EINVAL;
+ case FLEXCOP_II:
+ case FLEXCOP_IIB:
+ flexcop_sram_set_chip(fc, FC_SRAM_1_32KB);
+ break;
+ case FLEXCOP_III:
+ flexcop_sram_set_chip(fc, FC_SRAM_1_48KB);
+ break;
+ default:
+ return -EINVAL;
}
return 0;
}
-int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target)
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+ flexcop_sram_dest_target_t target)
{
flexcop_ibi_value v;
-
- v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+ v = fc->read_ibi_reg(fc, sram_dest_reg_714);
if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
err("SRAM destination target to available on FlexCopII(b)\n");
return -EINVAL;
}
-
- deb_sram("sram dest: %x target: %x\n",dest, target);
+ deb_sram("sram dest: %x target: %x\n", dest, target);
if (dest & FC_SRAM_DEST_NET)
v.sram_dest_reg_714.NET_Dest = target;
else
bank = 0x10000000;
}
-
flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
}
static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
{
u32 bank;
-
bank = 0;
if (adapter->dw_sram_type == 0x20000) {
else
bank = 0x10000000;
}
-
flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
}
static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
{
u32 length;
-
while (len != 0) {
length = len;
-
- // check if the address range belongs to the same
- // 32K memory chip. If not, the data is read from
- // one chip at a time.
+ /* check if the address range belongs to the same
+ * 32K memory chip. If not, the data is read
+ * from one chip at a time */
if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
}
sram_read_chunk(adapter, addr, buf, length);
-
addr = addr + length;
buf = buf + length;
len = len - length;
static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
{
u32 length;
-
while (len != 0) {
length = len;
- // check if the address range belongs to the same
- // 32K memory chip. If not, the data is written to
- // one chip at a time.
+ /* check if the address range belongs to the same
+ * 32K memory chip. If not, the data is
+ * written to one chip at a time */
if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
}
sram_write_chunk(adapter, addr, buf, length);
-
addr = addr + length;
buf = buf + length;
len = len - length;
static void sram_set_size(struct adapter *adapter, u32 mask)
{
- write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+ write_reg_dw(adapter, 0x71c,
+ (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
}
static void sram_init(struct adapter *adapter)
{
u32 tmp;
-
tmp = read_reg_dw(adapter, 0x71c);
-
write_reg_dw(adapter, 0x71c, 1);
if (read_reg_dw(adapter, 0x71c) != 0) {
write_reg_dw(adapter, 0x71c, tmp);
-
adapter->dw_sram_type = tmp & 0x30000;
-
ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
-
} else {
-
adapter->dw_sram_type = 0x10000;
-
ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
}
-
- /* return value is never used? */
-/* return adapter->dw_sram_type; */
}
static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
{
u8 tmp1, tmp2;
-
dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr);
sram_set_size(adapter, mask);
sram_write(adapter, addr + 4, &tmp1, 1);
tmp2 = 0;
-
mdelay(20);
sram_read(adapter, addr, &tmp2, 1);
sram_write(adapter, addr + 4, &tmp1, 1);
tmp2 = 0;
-
mdelay(20);
sram_read(adapter, addr, &tmp2, 1);
if (tmp2 != 0x5a)
return 0;
-
return 1;
}
static u32 sram_length(struct adapter *adapter)
{
if (adapter->dw_sram_type == 0x10000)
- return 32768; // 32K
+ return 32768; /* 32K */
if (adapter->dw_sram_type == 0x00000)
- return 65536; // 64K
+ return 65536; /* 64K */
if (adapter->dw_sram_type == 0x20000)
- return 131072; // 128K
-
- return 32768; // 32K
+ return 131072; /* 128K */
+ return 32768; /* 32K */
}
/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
- - for 128K there are 4x32K chips at bank 0,1,2,3.
- - for 64K there are 2x32K chips at bank 1,2.
- - for 32K there is one 32K chip at bank 0.
+ - for 128K there are 4x32K chips at bank 0,1,2,3.
+ - for 64K there are 2x32K chips at bank 1,2.
+ - for 32K there is one 32K chip at bank 0.
FlexCop works only with one bank at a time. The bank is selected
by bits 28-29 of the 0x700 register.
bank 0 covers addresses 0x00000-0x07fff
bank 1 covers addresses 0x08000-0x0ffff
bank 2 covers addresses 0x10000-0x17fff
- bank 3 covers addresses 0x18000-0x1ffff
-*/
+ bank 3 covers addresses 0x18000-0x1ffff */
static int flexcop_sram_detect(struct flexcop_device *fc)
{
- flexcop_ibi_value r208,r71c_0,vr71c_1;
-
+ flexcop_ibi_value r208, r71c_0, vr71c_1;
r208 = fc->read_ibi_reg(fc, ctrl_208);
fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
-
write_reg_dw(adapter, 0x71c, 1);
-
tmp3 = read_reg_dw(adapter, 0x71c);
-
dprintk("%s: tmp3 = %x\n", __func__, tmp3);
-
write_reg_dw(adapter, 0x71c, tmp2);
// check for internal SRAM ???
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
-
dprintk("%s: sram size = 32K\n", __func__);
-
return 32;
}
sram_set_size(adapter, 0x20000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
-
dprintk("%s: sram size = 128K\n", __func__);
-
return 128;
}
sram_set_size(adapter, 0x00000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
-
dprintk("%s: sram size = 64K\n", __func__);
-
return 64;
}
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
-
dprintk("%s: sram size = 32K\n", __func__);
-
return 32;
}
sram_set_size(adapter, 0x10000);
sram_init(adapter);
write_reg_dw(adapter, 0x208, tmp);
-
dprintk("%s: SRAM detection failed. Set to 32K \n", __func__);
-
return 0;
}
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.h - header file for the USB part
+ * see flexcop.c for copyright information
+ */
#ifndef __FLEXCOP_USB_H_INCLUDED__
#define __FLEXCOP_USB_H_INCLUDED__
#include <linux/usb.h>
/* transfer parameters */
-#define B2C2_USB_FRAMES_PER_ISO 4
-#define B2C2_USB_NUM_ISO_URB 4
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4
-#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0)
-#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0)
-#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81)
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
struct flexcop_usb {
struct usb_device *udev;
u8 *iso_buffer;
int buffer_size;
dma_addr_t dma_addr;
- struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+ struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
struct flexcop_device *fc_dev;
u8 tmp_buffer[1023+190];
/* request types TODO What is its use?*/
typedef enum {
-/* something is wrong with this part
- RTYPE_READ_DW = (1 << 6),
- RTYPE_WRITE_DW_1 = (3 << 6),
- RTYPE_READ_V8_MEMORY = (6 << 6),
- RTYPE_WRITE_V8_MEMORY = (7 << 6),
- RTYPE_WRITE_V8_FLASH = (8 << 6),
- RTYPE_GENERIC = (9 << 6),
-*/
} flexcop_usb_request_type_t;
#endif
B2C2_USB_READ_V8_MEM = 0x05,
B2C2_USB_READ_REG = 0x08,
B2C2_USB_WRITE_REG = 0x0A,
-/* B2C2_USB_WRITEREGLO = 0x0A, */
B2C2_USB_WRITEREGHI = 0x0B,
B2C2_USB_FLASH_BLOCK = 0x10,
B2C2_USB_I2C_REQUEST = 0x11,
USB_FUNC_I2C_REPEATWRITE = 0x04,
USB_FUNC_GET_DESCRIPTOR = 0x05,
USB_FUNC_I2C_REPEATREAD = 0x06,
-/* DKT 020208 - add this to support special case of DiSEqC */
+ /* DKT 020208 - add this to support special case of DiSEqC */
USB_FUNC_I2C_CHECKWRITE = 0x07,
USB_FUNC_I2C_CHECKRESULT = 0x08,
} flexcop_usb_i2c_function_t;
-/*
- * function definition for UTILITY request 0x12
- * DKT 020304 - new utility function
- */
+/* function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function */
typedef enum {
UTILITY_SET_FILTER = 0x01,
UTILITY_DATA_ENABLE = 0x02,
UTILITY_DATA_RESET = 0x0A,
UTILITY_GET_DATA_STATUS = 0x10,
UTILITY_GET_V8_REG = 0x11,
-/* DKT 020326 - add function for v1.14 */
+ /* DKT 020326 - add function for v1.14 */
UTILITY_SRAM_WRITE = 0x12,
UTILITY_SRAM_READ = 0x13,
UTILITY_SRAM_TESTFILL = 0x14,
UTILITY_SRAM_TESTVERIFY = 0x16,
} flexcop_usb_utility_function_t;
-#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */
-#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */
+#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */
+#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
typedef enum {
V8_MEMORY_PAGE_DVB_CI = 0x20,
V8_MEMORY_PAGE_FLASH = 0x80
} flexcop_usb_mem_page_t;
-#define V8_MEMORY_EXTENDED (1 << 15)
-
-#define USB_MEM_READ_MAX 32
-#define USB_MEM_WRITE_MAX 1
-#define USB_FLASH_MAX 8
-
-#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K
-#define V8_MEMORY_PAGE_MASK 0x7FFF
+#define V8_MEMORY_EXTENDED (1 << 15)
+#define USB_MEM_READ_MAX 32
+#define USB_MEM_WRITE_MAX 1
+#define USB_FLASH_MAX 8
+#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
+#define V8_MEMORY_PAGE_MASK 0x7FFF
#endif
/*
- * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de>
- *
- * based on the skystar2-driver
- * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.c - main module part
+ * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
+ * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
*
* Acknowledgements:
- * John Jurrius from BBTI, Inc. for extensive support with
- * code examples and data books
- *
- * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ * John Jurrius from BBTI, Inc. for extensive support
+ * with code examples and data books
+ * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
*
* Contributions to the skystar2-driver have been done by
- * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
- * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
- * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering)
- *
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
+ * filtering)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
int b2c2_flexcop_debug;
module_param_named(debug, b2c2_flexcop_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=tuner,4=i2c,8=ts,"
+ "16=sram,32=reg (|-able))."
+ DEBSTATUS);
#undef DEBSTATUS
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
- return flexcop_pid_feed_control(fc,dvbdmxfeed,1);
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
}
static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
{
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
- return flexcop_pid_feed_control(fc,dvbdmxfeed,0);
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
}
static int flexcop_dvb_init(struct flexcop_device *fc)
{
int ret = dvb_register_adapter(&fc->dvb_adapter,
- "FlexCop Digital TV device", fc->owner,
- fc->dev, adapter_nr);
+ "FlexCop Digital TV device", fc->owner,
+ fc->dev, adapter_nr);
if (ret < 0) {
err("error registering DVB adapter");
return ret;
}
fc->dvb_adapter.priv = fc;
- fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+ fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
+ | DMX_MEMORY_BASED_FILTERING);
fc->demux.priv = fc;
-
fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
-
fc->demux.start_feed = flexcop_dvb_start_feed;
fc->demux.stop_feed = flexcop_dvb_stop_feed;
fc->demux.write_to_decoder = NULL;
if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
- err("dvb_dmx failed: error %d",ret);
+ err("dvb_dmx failed: error %d", ret);
goto err_dmx;
}
fc->dmxdev.demux = &fc->demux.dmx;
fc->dmxdev.capabilities = 0;
if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
- err("dvb_dmxdev_init failed: error %d",ret);
+ err("dvb_dmxdev_init failed: error %d", ret);
goto err_dmx_dev;
}
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
- err("adding hw_frontend to dmx failed: error %d",ret);
+ err("adding hw_frontend to dmx failed: error %d", ret);
goto err_dmx_add_hw_frontend;
}
fc->mem_frontend.source = DMX_MEMORY_FE;
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
- err("adding mem_frontend to dmx failed: error %d",ret);
+ err("adding mem_frontend to dmx failed: error %d", ret);
goto err_dmx_add_mem_frontend;
}
if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
- err("connect frontend failed: error %d",ret);
+ err("connect frontend failed: error %d", ret);
goto err_connect_frontend;
}
return 0;
err_connect_frontend:
- fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
err_dmx_add_mem_frontend:
- fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
err_dmx_add_hw_frontend:
dvb_dmxdev_release(&fc->dmxdev);
err_dmx_dev:
dvb_net_release(&fc->dvbnet);
fc->demux.dmx.close(&fc->demux.dmx);
- fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend);
- fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->mem_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->hw_frontend);
dvb_dmxdev_release(&fc->dmxdev);
dvb_dmx_release(&fc->demux);
dvb_unregister_adapter(&fc->dvb_adapter);
-
deb_info("deinitialized dvb stuff\n");
}
fc->init_state &= ~FC_STATE_DVB_INIT;
static void flexcop_reset(struct flexcop_device *fc)
{
- flexcop_ibi_value v210,v204;
+ flexcop_ibi_value v210, v204;
-/* reset the flexcop itself */
+ /* reset the flexcop itself */
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
v210.raw = 0;
v210.sw_reset_210.reset_block_600 = 1;
v210.sw_reset_210.reset_block_700 = 1;
v210.sw_reset_210.Block_reset_enable = 0xb2;
-
v210.sw_reset_210.Special_controls = 0xc259;
-
fc->write_ibi_reg(fc,sw_reset_210,v210);
msleep(1);
-/* reset the periphical devices */
+ /* reset the periphical devices */
v204 = fc->read_ibi_reg(fc,misc_204);
v204.misc_204.Per_reset_sig = 0;
void flexcop_reset_block_300(struct flexcop_device *fc)
{
- flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208),
- v210 = fc->read_ibi_reg(fc,sw_reset_210);
-
- deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw);
+ flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
+ v210 = fc->read_ibi_reg(fc, sw_reset_210);
+ deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
v210.sw_reset_210.reset_block_300 = 1;
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
{
void *bus;
- struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), GFP_KERNEL);
+ struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
+ GFP_KERNEL);
if (!fc) {
err("no memory");
return NULL;
flexcop_determine_revision(fc);
flexcop_sram_init(fc);
flexcop_hw_filter_init(fc);
-
flexcop_smc_ctrl(fc, 0);
if ((ret = flexcop_dvb_init(fc)))
goto error;
flexcop_device_name(fc,"initialization of","complete");
-
return 0;
error:
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop.h - private header file for all flexcop-chip-source files.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.h - private header file for all flexcop-chip-source files
+ * see flexcop.c for copyright information
*/
#ifndef __FLEXCOP_H__
#define __FLEXCOP_H___
#define dprintk(level,args...)
#endif
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_tuner(args...) dprintk(0x02,args)
-#define deb_i2c(args...) dprintk(0x04,args)
-#define deb_ts(args...) dprintk(0x08,args)
-#define deb_sram(args...) dprintk(0x10,args)
-#define deb_rdump(args...) dprintk(0x20,args)
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_tuner(args...) dprintk(0x02, args)
+#define deb_i2c(args...) dprintk(0x04, args)
+#define deb_ts(args...) dprintk(0x08, args)
+#define deb_sram(args...) dprintk(0x10, args)
+#define deb_rdump(args...) dprintk(0x20, args)
#endif
-/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* register descriptions
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
*/
-
/* This file is automatically generated, do not edit things here. */
#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
#define __FLEXCOP_IBI_VALUE_INCLUDED__
-/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* register descriptions
- *
- * see flexcop.c for copyright information.
+ * see flexcop.c for copyright information
*/
-
/* This file is automatically generated, do not edit things here. */
#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
#define __FLEXCOP_IBI_VALUE_INCLUDED__
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff