ALSA: hda: enable speaker output for Compaq 6530s/6531s

HP Compaq 6530s and 6531s internal speaker is silence or becomes silence
within 1 minute after fresh boot. It is found that pin 0x1c must be set to
PIN_OUT mode to make the speaker work. This is weird - line-in pin 0x1c and
speaker pin 0x16 seem to be unrelated.

The codec differences before/after patch are:

@@ Node 0x17 [Pin Complex] wcaps 0x40020b:
   Pin Default 0x41a6e130: [N/A] Mic at Ext Rear
     Conn = Digital, Color = White
     DefAssociation = 0x3, Sequence = 0x0
     Misc = NO_PRESENCE
-  Pin-ctls: 0x24: IN
+  Pin-ctls: 0x40: OUT
@@ Node 0x1c [Pin Complex] wcaps 0x40018d:
   Pin Default 0x41813021: [N/A] Line In at Ext Rear
     Conn = 1/8, Color = Blue
     DefAssociation = 0x2, Sequence = 0x1
-  Pin-ctls: 0x24: IN VREF_80
+  Pin-ctls: 0x40: OUT VREF_HIZ
   Unsolicited: tag=00, enabled=0
   Connection: 1
      0x24

Tests show that it won't impact (external) Mic recording.

Reported-by: "Lin, Ming M" <ming.m.lin@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index e8e6a43..f2bb480 100644 (file)
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3823,9 +3823,11 @@ static struct hda_verb ad1884a_laptop_verbs[] = {
        /* Port-F (int speaker) mixer - route only from analog mixer */
        {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
        {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-       /* Port-F pin */
-       {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+       /* Port-F (int speaker) pin */
+       {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
        {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+       /* required for compaq 6530s/6531s speaker output */
+       {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
        /* Port-C pin - internal mic-in */
        {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
        {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */