#include "tda1002x.h"
#include "mt312.h"
#include "zl10039.h"
+#include "ds3000.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "stb6100.h"
+#include "stb6100_proc.h"
#ifndef USB_PID_DW2102
#define USB_PID_DW2102 0x2102
#define USB_PID_CINERGY_S 0x0064
#endif
+#ifndef USB_PID_TEVII_S630
+#define USB_PID_TEVII_S630 0xd630
+#endif
+
#ifndef USB_PID_TEVII_S650
#define USB_PID_TEVII_S650 0xd650
#endif
-#ifndef USB_PID_TEVII_S630
-#define USB_PID_TEVII_S630 0xd630
+#ifndef USB_PID_TEVII_S660
+#define USB_PID_TEVII_S660 0xd660
+#endif
+
+#ifndef USB_PID_PROF_1100
+#define USB_PID_PROF_1100 0xb012
#endif
#define DW210X_READ_MSG 0
#define DW2102_VOLTAGE_CTRL (0x1800)
#define DW2102_RC_QUERY (0x1a00)
+#define err_str "did not find the firmware file. (%s) " \
+ "Please see linux/Documentation/dvb/ for more details " \
+ "on firmware-problems."
+
struct dvb_usb_rc_keys_table {
struct dvb_usb_rc_key *rc_keys;
int rc_keys_size;
module_param_named(keymap, ir_keymap, int, 0644);
MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ...");
+/* demod probe */
+static int demod_probe = 1;
+module_param_named(demod, demod_probe, int, 0644);
+MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 "
+ "4=stv0903+stb6100(or-able)).");
+
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
switch (num) {
case 2:
/* read si2109 register by number */
- buf6[0] = 0xd0;
+ buf6[0] = msg[0].addr << 1;
buf6[1] = msg[0].len;
buf6[2] = msg[0].buf[0];
ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
switch (msg[0].addr) {
case 0x68:
/* write to si2109 register */
- buf6[0] = 0xd0;
+ buf6[0] = msg[0].addr << 1;
buf6[1] = msg[0].len;
memcpy(buf6 + 2, msg[0].buf, msg[0].len);
ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6,
/* read */
/* first write first register number */
u8 ibuf[msg[1].len + 2], obuf[3];
- obuf[0] = 0xd0;
+ obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
obuf[2] = msg[0].buf[0];
ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
case 0x68: {
/* write to register */
u8 obuf[msg[0].len + 2];
- obuf[0] = 0xd0;
+ obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
case 0x61: {
/* write to tuner */
u8 obuf[msg[0].len + 2];
- obuf[0] = 0xc2;
+ obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0;
- int len, i;
+ int len, i, j;
if (!d)
return -ENODEV;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
- switch (num) {
- case 2: {
- /* read */
- /* first write first register number */
- u8 ibuf[msg[1].len + 2], obuf[3];
- obuf[0] = 0xaa;
- obuf[1] = msg[0].len;
- obuf[2] = msg[0].buf[0];
- ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
- obuf, msg[0].len + 2, DW210X_WRITE_MSG);
- /* second read registers */
- ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0,
- ibuf, msg[1].len + 2, DW210X_READ_MSG);
- memcpy(msg[1].buf, ibuf + 2, msg[1].len);
-
- break;
- }
- case 1:
- switch (msg[0].addr) {
- case 0x55: {
- if (msg[0].buf[0] == 0xf7) {
- /* firmware */
- /* Write in small blocks */
- u8 obuf[19];
- obuf[0] = 0xaa;
- obuf[1] = 0x11;
- obuf[2] = 0xf7;
- len = msg[0].len - 1;
- i = 1;
- do {
- memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len));
- ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
- obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG);
- i += 16;
- len -= 16;
- } while (len > 0);
- } else {
- /* write to register */
- u8 obuf[msg[0].len + 2];
- obuf[0] = 0xaa;
- obuf[1] = msg[0].len;
- memcpy(obuf + 2, msg[0].buf, msg[0].len);
- ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
- obuf, msg[0].len + 2, DW210X_WRITE_MSG);
- }
- break;
- }
+ for (j = 0; j < num; j++) {
+ switch (msg[j].addr) {
case(DW2102_RC_QUERY): {
u8 ibuf[2];
ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
ibuf, 2, DW210X_READ_MSG);
- memcpy(msg[0].buf, ibuf , 2);
+ memcpy(msg[j].buf, ibuf , 2);
break;
}
case(DW2102_VOLTAGE_CTRL): {
u8 obuf[2];
obuf[0] = 0x30;
- obuf[1] = msg[0].buf[0];
+ obuf[1] = msg[j].buf[0];
ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
obuf, 2, DW210X_WRITE_MSG);
break;
}
+ /*case 0x55: cx24116
+ case 0x6a: stv0903
+ case 0x68: ds3000, stv0903
+ case 0x60: ts2020, stv6110, stb6100 */
+ default: {
+ if (msg[j].flags == I2C_M_RD) {
+ /* read registers */
+ u8 ibuf[msg[j].len + 2];
+ ret = dw210x_op_rw(d->udev, 0xc3,
+ (msg[j].addr << 1) + 1, 0,
+ ibuf, msg[j].len + 2,
+ DW210X_READ_MSG);
+ memcpy(msg[j].buf, ibuf + 2, msg[j].len);
+ mdelay(10);
+ } else if (((msg[j].buf[0] == 0xb0) &&
+ (msg[j].addr == 0x68)) ||
+ ((msg[j].buf[0] == 0xf7) &&
+ (msg[j].addr == 0x55))) {
+ /* write firmware */
+ u8 obuf[19];
+ obuf[0] = msg[j].addr << 1;
+ obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len);
+ obuf[2] = msg[j].buf[0];
+ len = msg[j].len - 1;
+ i = 1;
+ do {
+ memcpy(obuf + 3, msg[j].buf + i,
+ (len > 16 ? 16 : len));
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ obuf, (len > 16 ? 16 : len) + 3,
+ DW210X_WRITE_MSG);
+ i += 16;
+ len -= 16;
+ } while (len > 0);
+ } else {
+ /* write registers */
+ u8 obuf[msg[j].len + 2];
+ obuf[0] = msg[j].addr << 1;
+ obuf[1] = msg[j].len;
+ memcpy(obuf + 2, msg[j].buf, msg[j].len);
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ obuf, msg[j].len + 2,
+ DW210X_WRITE_MSG);
+ }
+ break;
+ }
}
- break;
}
mutex_unlock(&d->i2c_mutex);
return num;
}
-static int s630_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0;
+ int len, i, j;
if (!d)
return -ENODEV;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
- switch (num) {
- case 2: { /* read */
- u8 ibuf[msg[1].len], obuf[3];
- obuf[0] = msg[1].len;
- obuf[1] = (msg[0].addr << 1);
- obuf[2] = msg[0].buf[0];
-
- ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
- obuf, 3, DW210X_WRITE_MSG);
- msleep(5);
- ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
- ibuf, msg[1].len, DW210X_READ_MSG);
- memcpy(msg[1].buf, ibuf, msg[1].len);
- break;
- }
- case 1:
- switch (msg[0].addr) {
- case 0x60:
- case 0x0e: {
- /* write to zl10313, zl10039 register, */
- u8 obuf[msg[0].len + 2];
- obuf[0] = msg[0].len + 1;
- obuf[1] = (msg[0].addr << 1);
- memcpy(obuf + 2, msg[0].buf, msg[0].len);
- ret = dw210x_op_rw(d->udev, 0x80, 0, 0,
- obuf, msg[0].len + 2, DW210X_WRITE_MSG);
- break;
- }
+ for (j = 0; j < num; j++) {
+ switch (msg[j].addr) {
case (DW2102_RC_QUERY): {
u8 ibuf[4];
ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
ibuf, 4, DW210X_READ_MSG);
- msg[0].buf[0] = ibuf[3];
+ memcpy(msg[j].buf, ibuf + 1, 2);
break;
}
case (DW2102_VOLTAGE_CTRL): {
u8 obuf[2];
- obuf[0] = 0x03;
- obuf[1] = msg[0].buf[0];
+ obuf[0] = 3;
+ obuf[1] = msg[j].buf[0];
ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
obuf, 2, DW210X_WRITE_MSG);
break;
}
+ /*case 0x55: cx24116
+ case 0x6a: stv0903
+ case 0x68: ds3000, stv0903
+ case 0x60: ts2020, stv6110, stb6100
+ case 0xa0: eeprom */
+ default: {
+ if (msg[j].flags == I2C_M_RD) {
+ /* read registers */
+ u8 ibuf[msg[j].len];
+ ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
+ ibuf, msg[j].len,
+ DW210X_READ_MSG);
+ memcpy(msg[j].buf, ibuf, msg[j].len);
+ break;
+ } else if ((msg[j].buf[0] == 0xb0) &&
+ (msg[j].addr == 0x68)) {
+ /* write firmware */
+ u8 obuf[19];
+ obuf[0] = (msg[j].len > 16 ?
+ 18 : msg[j].len + 1);
+ obuf[1] = msg[j].addr << 1;
+ obuf[2] = msg[j].buf[0];
+ len = msg[j].len - 1;
+ i = 1;
+ do {
+ memcpy(obuf + 3, msg[j].buf + i,
+ (len > 16 ? 16 : len));
+ ret = dw210x_op_rw(d->udev, 0x80, 0, 0,
+ obuf, (len > 16 ? 16 : len) + 3,
+ DW210X_WRITE_MSG);
+ i += 16;
+ len -= 16;
+ } while (len > 0);
+ } else {
+ /* write registers */
+ u8 obuf[msg[j].len + 2];
+ obuf[0] = msg[j].len + 1;
+ obuf[1] = (msg[j].addr << 1);
+ memcpy(obuf + 2, msg[j].buf, msg[j].len);
+ ret = dw210x_op_rw(d->udev,
+ (num > 1 ? 0x90 : 0x80), 0, 0,
+ obuf, msg[j].len + 2,
+ DW210X_WRITE_MSG);
+ break;
+ }
+ break;
+ }
}
- break;
+ msleep(3);
}
mutex_unlock(&d->i2c_mutex);
.functionality = dw210x_i2c_func,
};
-static struct i2c_algorithm s630_i2c_algo = {
- .master_xfer = s630_i2c_transfer,
+static struct i2c_algorithm s6x0_i2c_algo = {
+ .master_xfer = s6x0_i2c_transfer,
.functionality = dw210x_i2c_func,
};
return 0;
};
-static int s630_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
{
int i, ret;
- u8 buf[3], eeprom[256], eepromline[16];
+ u8 ibuf[] = { 0 }, obuf[] = { 0 };
+ u8 eeprom[256], eepromline[16];
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0xa0 >> 1,
+ .flags = 0,
+ .buf = obuf,
+ .len = 1,
+ }, {
+ .addr = 0xa0 >> 1,
+ .flags = I2C_M_RD,
+ .buf = ibuf,
+ .len = 1,
+ }
+ };
for (i = 0; i < 256; i++) {
- buf[0] = 1;
- buf[1] = 0xa0;
- buf[2] = i;
- ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
- buf, 3, DW210X_WRITE_MSG);
- ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
- buf, 1, DW210X_READ_MSG);
- if (ret < 0) {
+ obuf[0] = i;
+ ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2);
+ if (ret != 2) {
err("read eeprom failed.");
return -1;
} else {
- eepromline[i % 16] = buf[0];
- eeprom[i] = buf[0];
+ eepromline[i % 16] = ibuf[0];
+ eeprom[i] = ibuf[0];
}
if ((i % 16) == 15) {
.demod_address = 0x0e,
};
+static struct ds3000_config dw2104_ds3000_config = {
+ .demod_address = 0x68,
+};
+
+static struct stv0900_config dw2104a_stv0900_config = {
+ .demod_address = 0x6a,
+ .demod_mode = 0,
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun1_adc = 0,/* 2 Vpp */
+ .path1_mode = 3,
+};
+
+static struct stb6100_config dw2104a_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static struct stv0900_config dw2104_stv0900_config = {
+ .demod_address = 0x68,
+ .demod_mode = 0,
+ .xtal = 8000000,
+ .clkmode = 3,
+ .diseqc_mode = 2,
+ .tun1_maddress = 0,
+ .tun1_adc = 1,/* 1 Vpp */
+ .path1_mode = 3,
+};
+
+static struct stv6110_config dw2104_stv6110_config = {
+ .i2c_address = 0x60,
+ .mclk = 16000000,
+ .clk_div = 1,
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
- if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
- &d->dev->i2c_adap)) != NULL) {
+ struct dvb_tuner_ops *tuner_ops = NULL;
+
+ if (demod_probe & 4) {
+ d->fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
+ &d->dev->i2c_adap, 0);
+ if (d->fe != NULL) {
+ if (dvb_attach(stb6100_attach, d->fe,
+ &dw2104a_stb6100_config,
+ &d->dev->i2c_adap)) {
+ tuner_ops = &d->fe->ops.tuner_ops;
+ tuner_ops->set_frequency = stb6100_set_freq;
+ tuner_ops->get_frequency = stb6100_get_freq;
+ tuner_ops->set_bandwidth = stb6100_set_bandw;
+ tuner_ops->get_bandwidth = stb6100_get_bandw;
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached STV0900+STB6100!\n");
+ return 0;
+ }
+ }
+ }
+
+ if (demod_probe & 2) {
+ d->fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
+ &d->dev->i2c_adap, 0);
+ if (d->fe != NULL) {
+ if (dvb_attach(stv6110_attach, d->fe,
+ &dw2104_stv6110_config,
+ &d->dev->i2c_adap)) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached STV0900+STV6110A!\n");
+ return 0;
+ }
+ }
+ }
+
+ if (demod_probe & 1) {
+ d->fe = dvb_attach(cx24116_attach, &dw2104_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached cx24116!\n");
+ return 0;
+ }
+ }
+
+ d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
d->fe->ops.set_voltage = dw210x_set_voltage;
- info("Attached cx24116!\n");
+ info("Attached DS3000!\n");
return 0;
}
+
return -EIO;
}
static struct dvb_usb_device_properties dw2102_properties;
static struct dvb_usb_device_properties dw2104_properties;
+static struct dvb_usb_device_properties s6x0_properties;
static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
{
return 0;
}
}
+
if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) {
- /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
d->fe = dvb_attach(stv0288_attach, &earda_config,
&d->dev->i2c_adap);
if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw210x_set_voltage;
- info("Attached stv0288!\n");
- return 0;
+ if (dvb_attach(stb6000_attach, d->fe, 0x61,
+ &d->dev->i2c_adap)) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached stv0288!\n");
+ return 0;
+ }
}
}
return -EIO;
}
-static int s630_frontend_attach(struct dvb_usb_adapter *d)
+static int s6x0_frontend_attach(struct dvb_usb_adapter *d)
{
d->fe = dvb_attach(mt312_attach, &zl313_config,
- &d->dev->i2c_adap);
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ if (dvb_attach(zl10039_attach, d->fe, 0x60,
+ &d->dev->i2c_adap)) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached zl100313+zl10039!\n");
+ return 0;
+ }
+ }
+
+ d->fe = dvb_attach(stv0288_attach, &earda_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ if (dvb_attach(stb6000_attach, d->fe, 0x61,
+ &d->dev->i2c_adap)) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached stv0288+stb6000!\n");
+ return 0;
+ }
+ }
+
+ d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+ &d->dev->i2c_adap);
if (d->fe != NULL) {
d->fe->ops.set_voltage = dw210x_set_voltage;
- info("Attached zl10313!\n");
+ info("Attached ds3000+ds2020!\n");
return 0;
}
+
return -EIO;
}
return 0;
}
-static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap)
-{
- dvb_attach(stb6000_attach, adap->fe, 0x61,
- &adap->dev->i2c_adap);
-
- return 0;
-}
-
static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
return 0;
}
-static int s630_zl10039_tuner_attach(struct dvb_usb_adapter *adap)
-{
- dvb_attach(zl10039_attach, adap->fe, 0x60,
- &adap->dev->i2c_adap);
-
- return 0;
-}
-
static struct dvb_usb_rc_key dw210x_rc_keys[] = {
{ 0xf80a, KEY_Q }, /*power*/
{ 0xf80c, KEY_M }, /*mute*/
{USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
{USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
+ {USB_DEVICE(0x3011, USB_PID_PROF_1100)},
+ {USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
{ }
};
u8 reset;
u8 reset16[] = {0, 0, 0, 0, 0, 0, 0};
const struct firmware *fw;
- const char *filename = "dvb-usb-dw2101.fw";
+ const char *fw_2101 = "dvb-usb-dw2101.fw";
switch (dev->descriptor.idProduct) {
case 0x2101:
- ret = request_firmware(&fw, filename, &dev->dev);
+ ret = request_firmware(&fw, fw_2101, &dev->dev);
if (ret != 0) {
- err("did not find the firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details "
- "on firmware-problems.", filename);
+ err(err_str, fw_2101);
return ret;
}
break;
}
/* init registers */
switch (dev->descriptor.idProduct) {
+ case USB_PID_PROF_1100:
+ s6x0_properties.rc_key_map = tbs_rc_keys;
+ s6x0_properties.rc_key_map_size =
+ ARRAY_SIZE(tbs_rc_keys);
+ break;
case USB_PID_TEVII_S650:
dw2104_properties.rc_key_map = tevii_rc_keys;
dw2104_properties.rc_key_map_size =
DW210X_READ_MSG);
if (reset16[2] == 0x11) {
dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo;
- dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach;
break;
}
}
}
};
-static struct dvb_usb_device_properties s630_properties = {
+static struct dvb_usb_device_properties s6x0_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-s630.fw",
.no_reconnect = 1,
- .i2c_algo = &s630_i2c_algo,
+ .i2c_algo = &s6x0_i2c_algo,
.rc_key_map = tevii_rc_keys,
.rc_key_map_size = ARRAY_SIZE(tevii_rc_keys),
.rc_interval = 150,
.generic_bulk_ctrl_endpoint = 0x81,
.num_adapters = 1,
.download_firmware = dw2102_load_firmware,
- .read_mac_address = s630_read_mac_address,
+ .read_mac_address = s6x0_read_mac_address,
.adapter = {
{
- .frontend_attach = s630_frontend_attach,
+ .frontend_attach = s6x0_frontend_attach,
.streaming_ctrl = NULL,
- .tuner_attach = s630_zl10039_tuner_attach,
+ .tuner_attach = NULL,
.stream = {
.type = USB_BULK,
.count = 8,
},
}
},
- .num_device_descs = 1,
+ .num_device_descs = 3,
.devices = {
{"TeVii S630 USB",
{&dw2102_table[6], NULL},
{NULL},
},
+ {"Prof 1100 USB ",
+ {&dw2102_table[7], NULL},
+ {NULL},
+ },
+ {"TeVii S660 USB",
+ {&dw2102_table[8], NULL},
+ {NULL},
+ },
}
};
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dw3101_properties,
THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &s630_properties,
- THIS_MODULE, NULL, adapter_nr)) {
+ 0 == dvb_usb_device_init(intf, &s6x0_properties,
+ THIS_MODULE, NULL, adapter_nr))
return 0;
- }
+
return -ENODEV;
}
MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
" DVB-C 3101 USB2.0,"
- " TeVii S600, S630, S650 USB2.0 devices");
+ " TeVii S600, S630, S650, S660 USB2.0,"
+ " Prof 1100 USB2.0 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff