[POWERPC] get_property cleanups
authorStephen Rothwell <sfr@canb.auug.org.au>
Sun, 29 Apr 2007 06:29:08 +0000 (16:29 +1000)
committerPaul Mackerras <paulus@samba.org>
Mon, 30 Apr 2007 01:02:05 +0000 (11:02 +1000)
Just another pass through arch/powerpc for old usages.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/platforms/cell/ras.c
arch/powerpc/platforms/pasemi/cpufreq.c
arch/powerpc/platforms/pasemi/gpio_mdio.c
arch/powerpc/sysdev/uic.c

index b5ebc91..3961a08 100644 (file)
@@ -149,7 +149,7 @@ static int __init cbe_ptcal_enable(void)
        if (!np)
                return -ENODEV;
 
-       size = get_property(np, "ibm,cbe-ptcal-size", NULL);
+       size = of_get_property(np, "ibm,cbe-ptcal-size", NULL);
        if (!size)
                return -ENODEV;
 
@@ -168,7 +168,7 @@ static int __init cbe_ptcal_enable(void)
 
        /* support for older device tree - use cpu nodes */
        for_each_node_by_type(np, "cpu") {
-               const u32 *nid = get_property(np, "node-id", NULL);
+               const u32 *nid = of_get_property(np, "node-id", NULL);
                if (!nid) {
                        printk(KERN_ERR "%s: node %s is missing node-id?\n",
                                        __FUNCTION__, np->full_name);
index 4dd5c51..2a57d60 100644 (file)
@@ -134,7 +134,8 @@ void restore_astate(int cpu)
 
 static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-       u32 *max_freq;
+       const u32 *max_freqp;
+       u32 max_freq;
        int i, cur_astate;
        struct resource res;
        struct device_node *cpu, *dn;
@@ -175,16 +176,16 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
        pr_debug("init cpufreq on CPU %d\n", policy->cpu);
 
-       max_freq = (u32*) get_property(cpu, "clock-frequency", NULL);
-       if (!max_freq) {
+       max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+       if (!max_freqp) {
                err = -EINVAL;
                goto out_unmap_sdcpwr;
        }
 
        /* we need the freq in kHz */
-       *max_freq /= 1000;
+       max_freq = *max_freqp / 1000;
 
-       pr_debug("max clock-frequency is at %u kHz\n", *max_freq);
+       pr_debug("max clock-frequency is at %u kHz\n", max_freq);
        pr_debug("initializing frequency table\n");
 
        /* initialize frequency table */
index b1d3b6b..c91a335 100644 (file)
@@ -258,7 +258,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
        new_bus->write = &gpio_mdio_write,
        new_bus->reset = &gpio_mdio_reset,
 
-       prop = get_property(np, "reg", NULL);
+       prop = of_get_property(np, "reg", NULL);
        new_bus->id = *prop;
        new_bus->priv = priv;
 
@@ -269,10 +269,10 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
                new_bus->irq[i] = irq_create_mapping(NULL, 10);
 
 
-       prop = get_property(np, "mdc-pin", NULL);
+       prop = of_get_property(np, "mdc-pin", NULL);
        priv->mdc_pin = *prop;
 
-       prop = get_property(np, "mdio-pin", NULL);
+       prop = of_get_property(np, "mdio-pin", NULL);
        priv->mdio_pin = *prop;
 
        new_bus->dev = dev;
index cdbe684..968fb40 100644 (file)
@@ -230,7 +230,7 @@ static struct uic * __init uic_init_one(struct device_node *node)
        memset(uic, 0, sizeof(*uic));
        spin_lock_init(&uic->lock);
        uic->of_node = of_node_get(node);
-       indexp = get_property(node, "cell-index", &len);
+       indexp = of_get_property(node, "cell-index", &len);
        if (!indexp || (len != sizeof(u32))) {
                printk(KERN_ERR "uic: Device node %s has missing or invalid "
                       "cell-index property\n", node->full_name);
@@ -238,7 +238,7 @@ static struct uic * __init uic_init_one(struct device_node *node)
        }
        uic->index = *indexp;
 
-       dcrreg = get_property(node, "dcr-reg", &len);
+       dcrreg = of_get_property(node, "dcr-reg", &len);
        if (!dcrreg || (len != 2*sizeof(u32))) {
                printk(KERN_ERR "uic: Device node %s has missing or invalid "
                       "dcr-reg property\n", node->full_name);
@@ -278,7 +278,7 @@ void __init uic_init_tree(void)
 
        np = of_find_compatible_node(NULL, NULL, "ibm,uic");
        while (np) {
-               interrupts = get_property(np, "interrupts", NULL);
+               interrupts = of_get_property(np, "interrupts", NULL);
                if (! interrupts)
                        break;
 
@@ -297,7 +297,7 @@ void __init uic_init_tree(void)
        /* The scan again for cascaded UICs */
        np = of_find_compatible_node(NULL, NULL, "ibm,uic");
        while (np) {
-               interrupts = get_property(np, "interrupts", NULL);
+               interrupts = of_get_property(np, "interrupts", NULL);
                if (interrupts) {
                        /* Secondary UIC */
                        int cascade_virq;