mn10300: insert PCI root bus resources for the ASB2305 devel motherboard

Insert PCI root bus resources for the MN10300-based ASB2305 development
kit motherboard.  This is required because the CPU's window onto the PCI
bus address space is considerably smaller than the CPU's full address
space and non-PCI devices lie outside of the PCI window that we might want
to access.

Without this patch, the PCI root bus uses the platform-level bus
resources, and these are then confined to the PCI window, thus making
platform_device_add() reject devices outside of this window.

We also add a reservation for the PCI SRAM region.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 02527ce..2cb7e75 100644 (file)
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -27,6 +27,29 @@ struct pci_bus *pci_root_bus;
 struct pci_ops *pci_root_ops;
 
 /*
 struct pci_ops *pci_root_ops;
 
 /*

+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+       .name   = "PCI IO",
+       .start  = 0xbe000000,
+       .end    = 0xbe03ffff,
+       .flags  = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+       .name   = "PCI mem",
+       .start  = 0xb8000000,
+       .end    = 0xbbffffff,
+       .flags  = IORESOURCE_MEM,
+};
+
+/*

  * Functions for accessing PCI configuration space
  */
 
  * Functions for accessing PCI configuration space
  */
 


@@ -297,6 +320,7 @@ static int __init pci_check_direct(void)
                printk(KERN_INFO "PCI: Using configuration ampci\n");
                request_mem_region(0xBE040000, 256, "AMPCI bridge");
                request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
                printk(KERN_INFO "PCI: Using configuration ampci\n");
                request_mem_region(0xBE040000, 256, "AMPCI bridge");
                request_mem_region(0xBFFFFFF4, 12, "PCI ampci");

+               request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");

                return 0;
        }
 
                return 0;
        }
 


@@ -358,6 +382,11 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
        struct pci_dev *dev;
 
 {
        struct pci_dev *dev;
 

+       if (bus->number == 0) {
+               bus->resource[0] = &pci_ioport_resource;
+               bus->resource[1] = &pci_iomem_resource;
+       }
+

        if (bus->self) {
                pci_read_bridge_bases(bus);
                pcibios_fixup_device_resources(bus->self);
        if (bus->self) {
                pci_read_bridge_bases(bus);
                pcibios_fixup_device_resources(bus->self);


@@ -380,6 +409,11 @@ static int __init pcibios_init(void)
        iomem_resource.start    = 0xA0000000;
        iomem_resource.end      = 0xDFFFFFFF;
 
        iomem_resource.start    = 0xA0000000;
        iomem_resource.end      = 0xDFFFFFFF;
 

+       if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+               panic("Unable to insert PCI IOMEM resource\n");
+       if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+               panic("Unable to insert PCI IOPORT resource\n");
+

        if (!pci_probe)
                return 0;
 
        if (!pci_probe)
                return 0;
 


@@ -391,32 +425,11 @@ static int __init pcibios_init(void)
        printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
               MEM_PAGING_REG);
 
        printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
               MEM_PAGING_REG);
 

-       {
-#if 0
-               static struct pci_bus am33_root_bus = {
-                       .children  = LIST_HEAD_INIT(am33_root_bus.children),
-                       .devices   = LIST_HEAD_INIT(am33_root_bus.devices),
-                       .number    = 0,
-                       .secondary = 0,
-                       .resource = { &ioport_resource, &iomem_resource },
-               };
-
-               am33_root_bus.ops = pci_root_ops;
-               list_add_tail(&am33_root_bus.node, &pci_root_buses);
-
-               am33_root_bus.subordinate = pci_do_scan_bus(0);
-
-               pci_root_bus = &am33_root_bus;
-#else
-               pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
-#endif
-       }
+       pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);

 
        pcibios_irq_init();
        pcibios_fixup_irqs();
 
        pcibios_irq_init();
        pcibios_fixup_irqs();

-#if 0

        pcibios_resource_survey();
        pcibios_resource_survey();

-#endif

        return 0;
 }
 
        return 0;
 }