kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+ /*
+ * Disable propagation of mbus errors to the CPU local bus,
+ * as this causes mbus errors (which can occur for example
+ * for PCI aborts) to throw CPU aborts, which we're not set
+ * up to deal with.
+ */
+ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
kirkwood_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
#include <mach/kirkwood.h>
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_RESET 0x00000002
};
static struct platform_device rtc_device = {
- .name = "rtc0",
+ .name = "rtc-coh901331",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
config MIPS
bool
default y
+ select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
static __init void prom_init_cmdline(void)
{
- char buf[CL_SIZE];
+ static char buf[CL_SIZE] __initdata;
/* Get the kernel command line from CFE */
if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar 4 23:08:06 2009
+# Linux kernel version: 2.6.32-rc6
+# Sun Nov 8 22:59:47 2009
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
+CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
#
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# Mapping drivers for chip access
#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_RBTX4939=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_TXX9NDFMC=m
# CONFIG_MTD_ONENAND is not set
#
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NE2000=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_TXX9=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TX4939=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_TXX9ACLC=m
+CONFIG_HAS_TXX9_ACLC=y
+CONFIG_SND_SOC_TXX9ACLC_AC97=m
+CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_TX4939=y
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_TXX9_DMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#include <asm/scatterlist.h>
#include <asm/cache.h>
+#include <asm-generic/dma-coherent.h>
void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
-#if 0
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
- dma_addr_t device_addr, size_t size, int flags);
-extern void dma_release_declared_memory(struct device *dev);
-extern void * dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size);
-#endif
-
#endif /* _ASM_DMA_MAPPING_H */
unsigned int mtflags;
int cpu;
struct clock_event_device *cd;
- unsigned long nextstamp = 0L;
+ unsigned long nextstamp;
unsigned long reference;
repeat:
+ nextstamp = 0L;
for_each_online_cpu(cpu) {
/*
* Find virtual CPUs within the current VPE who have
/*
* In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit. This does imply that, if a full 32
- * FPRs are desired, there needs to be a flip-flop that can be written
- * to one at that bit position. In any case, O32 MIPS ABI uses
- * only the even FPRs (Status.FR = 0).
+ * basis of the Status.FR bit. If an FPU is not present, the FR bit
+ * is hardwired to zero, which would imply a 32-bit FPU even for
+ * 64-bit CPUs. For 64-bit kernels with no FPU we use TIF_32BIT_REGS
+ * as a proxy for the FR bit so that a 64-bit FPU is emulated. In any
+ * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the
+ * even FPRs are used (Status.FR = 0).
*/
-
-#define CP0_STATUS_FR_SUPPORT
-
-#ifdef CP0_STATUS_FR_SUPPORT
-#define FR_BIT ST0_FR
+static inline int cop1_64bit(struct pt_regs *xcp)
+{
+ if (cpu_has_fpu)
+ return xcp->cp0_status & ST0_FR;
+#ifdef CONFIG_64BIT
+ return !test_thread_flag(TIF_32BIT_REGS);
#else
-#define FR_BIT 0
+ return 0;
#endif
+}
+
+#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \
+ (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32))
-#define SIFROMREG(si, x) ((si) = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
- (int)ctx->fpr[x] : \
- (int)(ctx->fpr[x & ~1] >> 32 ))
-#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
+#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \
+ cop1_64bit(xcp) || !(x & 1) ? \
ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
-#define DIFROMREG(di, x) ((di) = \
- ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)])
-#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \
- = (di))
+#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
+#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
#define SPFROMREG(sp, x) SIFROMREG((sp).bits, x)
#define SPTOREG(sp, x) SITOREG((sp).bits, x)
{
void *ret;
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+ return ret;
+
gfp = massage_gfp_flags(dev, gfp);
ret = (void *) __get_free_pages(gfp, get_order(size));
dma_addr_t dma_handle)
{
unsigned long addr = (unsigned long) vaddr;
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
{
char *memsize_str;
unsigned int memsize;
- char cmdline[CL_SIZE], *ptr;
+ char *ptr;
+ static char cmdline[CL_SIZE] __initdata;
/* otherwise look in the environment */
memsize_str = prom_getenv("memsize");
void __init prom_setup_cmdline(void)
{
- char cmd_line[CL_SIZE];
+ static char cmd_line[CL_SIZE] __initdata;
char *cp, *board;
int prom_argc;
char **prom_argv, **prom_envp;
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
- char builtin[CL_SIZE];
+ static char builtin[CL_SIZE] __initdata;
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
static void __init preprocess_cmdline(void)
{
- char cmdline[CL_SIZE];
+ static char cmdline[CL_SIZE] __initdata;
char *s;
strcpy(cmdline, arcs_cmdline);
disabled_wait(0);
sched_clock_base_cc = TOD_UNIX_EPOCH;
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
}
#ifdef CONFIG_SHARED_KERNEL
return;
}
+ /* re-initialize cputime accounting. */
+ sched_clock_base_cc = get_clock();
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
+ S390_lowcore.last_update_timer = 0x7fffffffffffffffULL;
+ S390_lowcore.user_timer = 0;
+ S390_lowcore.system_timer = 0;
+ asm volatile("SPT 0(%0)" : : "a" (&S390_lowcore.last_update_timer));
+
/* re-setup boot command line with new ipl vm parms */
ipl_update_parameters();
setup_boot_command_line();
lh %r7,0x8a # get svc number from lowcore
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
TRACE_IRQS_OFF
- l %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ l %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- lg %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ lg %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
btusb_stop_traffic(data);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
- return 0;
+ goto failed;
data->intf->needs_remote_wakeup = 0;
usb_autopm_put_interface(data->intf);
+failed:
+ usb_scuttle_anchored_urbs(&data->deferred);
return 0;
}
dev->ff = ff;
dev->flush = flush_effects;
dev->event = input_ff_event;
- set_bit(EV_FF, dev->evbit);
+ __set_bit(EV_FF, dev->evbit);
/* Copy "true" bits into ff device bitmap */
for (i = 0; i <= FF_MAX; i++)
if (test_bit(i, dev->ffbit))
- set_bit(i, ff->ffbit);
+ __set_bit(i, ff->ffbit);
/* we can emulate RUMBLE with periodic effects */
if (test_bit(FF_PERIODIC, ff->ffbit))
- set_bit(FF_RUMBLE, dev->ffbit);
+ __set_bit(FF_RUMBLE, dev->ffbit);
return 0;
}
*/
void input_ff_destroy(struct input_dev *dev)
{
- clear_bit(EV_FF, dev->evbit);
- if (dev->ff) {
- if (dev->ff->destroy)
- dev->ff->destroy(dev->ff);
- kfree(dev->ff->private);
- kfree(dev->ff);
+ struct ff_device *ff = dev->ff;
+
+ __clear_bit(EV_FF, dev->evbit);
+ if (ff) {
+ if (ff->destroy)
+ ff->destroy(ff);
+ kfree(ff->private);
+ kfree(ff);
dev->ff = NULL;
}
}
struct ml_effect_state states[FF_MEMLESS_EFFECTS];
int gain;
struct timer_list timer;
- spinlock_t timer_lock;
struct input_dev *dev;
int (*play_effect)(struct input_dev *dev, void *data,
{
struct input_dev *dev = (struct input_dev *)timer_data;
struct ml_device *ml = dev->ff->private;
+ unsigned long flags;
debug("timer: updating effects");
- spin_lock(&ml->timer_lock);
+ spin_lock_irqsave(&dev->event_lock, flags);
ml_play_effects(ml);
- spin_unlock(&ml->timer_lock);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
+/*
+ * Sets requested gain for FF effects. Called with dev->event_lock held.
+ */
static void ml_ff_set_gain(struct input_dev *dev, u16 gain)
{
struct ml_device *ml = dev->ff->private;
int i;
- spin_lock_bh(&ml->timer_lock);
-
ml->gain = gain;
for (i = 0; i < FF_MEMLESS_EFFECTS; i++)
__clear_bit(FF_EFFECT_PLAYING, &ml->states[i].flags);
ml_play_effects(ml);
-
- spin_unlock_bh(&ml->timer_lock);
}
+/*
+ * Start/stop specified FF effect. Called with dev->event_lock held.
+ */
static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
- unsigned long flags;
-
- spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_irqrestore(&ml->timer_lock, flags);
-
return 0;
}
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect->id];
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irq(&dev->event_lock);
if (test_bit(FF_EFFECT_STARTED, &state->flags)) {
__clear_bit(FF_EFFECT_PLAYING, &state->flags);
ml_schedule_timer(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irq(&dev->event_lock);
return 0;
}
ml->private = data;
ml->play_effect = play_effect;
ml->gain = 0xffff;
- spin_lock_init(&ml->timer_lock);
setup_timer(&ml->timer, ml_effect_timer, (unsigned long)dev);
set_bit(FF_GAIN, dev->ffbit);
return 0;
}
-#define INPUT_DO_TOGGLE(dev, type, bits, on) \
- do { \
- int i; \
- if (!test_bit(EV_##type, dev->evbit)) \
- break; \
- for (i = 0; i < type##_MAX; i++) { \
- if (!test_bit(i, dev->bits##bit) || \
- !test_bit(i, dev->bits)) \
- continue; \
- dev->event(dev, EV_##type, i, on); \
- } \
+#define INPUT_DO_TOGGLE(dev, type, bits, on) \
+ do { \
+ int i; \
+ bool active; \
+ \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ break; \
+ \
+ for (i = 0; i < type##_MAX; i++) { \
+ if (!test_bit(i, dev->bits##bit)) \
+ continue; \
+ \
+ active = test_bit(i, dev->bits); \
+ if (!active && !on) \
+ continue; \
+ \
+ dev->event(dev, EV_##type, i, on ? active : 0); \
+ } \
} while (0)
#ifdef CONFIG_PM
return -1;
atkbd_activate(atkbd);
+
+ /*
+ * Restore LED state and repeat rate. While input core
+ * will do this for us at resume time reconnect may happen
+ * because user requested it via sysfs or simply because
+ * keyboard was unplugged and plugged in again so we need
+ * to do it ourselves here.
+ */
+ atkbd_set_leds(atkbd);
+ if (!atkbd->softrepeat)
+ atkbd_set_repeat_rate(atkbd);
+
}
atkbd_enable(atkbd);
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+ atkbd_reset_state(atkbd);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
{
int type = *((unsigned int *)kp->arg);
- return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name);
+ return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name);
}
static int __init psmouse_init(void)
desc->raid_disk < mddev->raid_disks */) {
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = desc->raid_disk;
+ } else if (desc->state & (1<<MD_DISK_ACTIVE)) {
+ /* active but not in sync implies recovery up to
+ * reshape position. We don't know exactly where
+ * that is, so set to zero for now */
+ if (mddev->minor_version >= 91) {
+ rdev->recovery_offset = 0;
+ rdev->raid_disk = desc->raid_disk;
+ }
}
if (desc->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
list_for_each_entry(rdev2, &mddev->disks, same_set) {
mdp_disk_t *d;
int desc_nr;
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ int is_active = test_bit(In_sync, &rdev2->flags);
+
+ if (rdev2->raid_disk >= 0 &&
+ sb->minor_version >= 91)
+ /* we have nowhere to store the recovery_offset,
+ * but if it is not below the reshape_position,
+ * we can piggy-back on that.
+ */
+ is_active = 1;
+ if (rdev2->raid_disk < 0 ||
+ test_bit(Faulty, &rdev2->flags))
+ is_active = 0;
+ if (is_active)
desc_nr = rdev2->raid_disk;
else
desc_nr = next_spare++;
d->number = rdev2->desc_nr;
d->major = MAJOR(rdev2->bdev->bd_dev);
d->minor = MINOR(rdev2->bdev->bd_dev);
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ if (is_active)
d->raid_disk = rdev2->raid_disk;
else
d->raid_disk = rdev2->desc_nr; /* compatibility */
if (test_bit(Faulty, &rdev2->flags))
d->state = (1<<MD_DISK_FAULTY);
- else if (test_bit(In_sync, &rdev2->flags)) {
+ else if (is_active) {
d->state = (1<<MD_DISK_ACTIVE);
- d->state |= (1<<MD_DISK_SYNC);
+ if (test_bit(In_sync, &rdev2->flags))
+ d->state |= (1<<MD_DISK_SYNC);
active++;
working++;
} else {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags)) {
- if (mddev->curr_resync_completed > rdev->recovery_offset)
- rdev->recovery_offset = mddev->curr_resync_completed;
if (rdev->recovery_offset > 0) {
sb->feature_map |=
cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET);
*/
mdk_rdev_t *rdev;
+ /* First make sure individual recovery_offsets are correct */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags) &&
+ mddev->curr_resync_completed > rdev->recovery_offset)
+ rdev->recovery_offset = mddev->curr_resync_completed;
+
+ }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->sb_events == mddev->events ||
(nospares &&
return ERR_PTR(-ENOMEM);
}
+
+static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded)
+{
+ switch (algo) {
+ case ALGORITHM_PARITY_0:
+ if (raid_disk < max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_N:
+ if (raid_disk >= raid_disks - max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_0_6:
+ if (raid_disk == 0 ||
+ raid_disk == raid_disks - 1)
+ return 1;
+ break;
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ if (raid_disk == raid_disks - 1)
+ return 1;
+ }
+ return 0;
+}
+
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
int working_disks = 0, chunk_size;
+ int dirty_parity_disks = 0;
mdk_rdev_t *rdev;
+ sector_t reshape_offset = 0;
if (mddev->recovery_cp != MaxSector)
printk(KERN_NOTICE "raid5: %s is not clean"
"on a stripe boundary\n");
return -EINVAL;
}
+ reshape_offset = here_new * mddev->new_chunk_sectors;
/* here_new is the stripe we will write to */
here_old = mddev->reshape_position;
sector_div(here_old, mddev->chunk_sectors *
/*
* 0 for a fully functional array, 1 or 2 for a degraded array.
*/
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0 &&
- test_bit(In_sync, &rdev->flags))
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk < 0)
+ continue;
+ if (test_bit(In_sync, &rdev->flags))
working_disks++;
+ /* This disc is not fully in-sync. However if it
+ * just stored parity (beyond the recovery_offset),
+ * when we don't need to be concerned about the
+ * array being dirty.
+ * When reshape goes 'backwards', we never have
+ * partially completed devices, so we only need
+ * to worry about reshape going forwards.
+ */
+ /* Hack because v0.91 doesn't store recovery_offset properly. */
+ if (mddev->major_version == 0 &&
+ mddev->minor_version > 90)
+ rdev->recovery_offset = reshape_offset;
+
+ printk("%d: w=%d pa=%d pr=%d m=%d a=%d r=%d op1=%d op2=%d\n",
+ rdev->raid_disk, working_disks, conf->prev_algo,
+ conf->previous_raid_disks, conf->max_degraded,
+ conf->algorithm, conf->raid_disks,
+ only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded),
+ only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded));
+ if (rdev->recovery_offset < reshape_offset) {
+ /* We need to check old and new layout */
+ if (!only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded))
+ continue;
+ }
+ if (!only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded))
+ continue;
+ dirty_parity_disks++;
+ }
mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
- working_disks);
mddev->dev_sectors &= ~(mddev->chunk_sectors - 1);
mddev->resync_max_sectors = mddev->dev_sectors;
- if (mddev->degraded > 0 &&
+ if (mddev->degraded > dirty_parity_disks &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
printk(KERN_WARNING
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
- set_bit(In_sync, &rdev->flags);
+ if (rdev->raid_disk >= conf->previous_raid_disks)
+ set_bit(In_sync, &rdev->flags);
+ else
+ rdev->recovery_offset = 0;
added_devices++;
- rdev->recovery_offset = 0;
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
}
subdev->mtd->owner = THIS_MODULE;
- printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
- "%d-bit\n", phys, subdev->mtd->size >> 20,
+ printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n",
+ phys, (unsigned)(subdev->mtd->size >> 20),
subdev->map.bankwidth * 8);
return 0;
int ret = 0;
drhd = (struct acpi_dmar_hardware_unit *)header;
- if (!drhd->address) {
- /* Promote an attitude of violence to a BIOS engineer today */
- WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
- "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR),
- dmi_get_system_info(DMI_BIOS_VERSION),
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- return -ENODEV;
- }
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
return 0;
}
+int __init check_zero_address(void)
+{
+ struct acpi_table_dmar *dmar;
+ struct acpi_dmar_header *entry_header;
+ struct acpi_dmar_hardware_unit *drhd;
+
+ dmar = (struct acpi_table_dmar *)dmar_tbl;
+ entry_header = (struct acpi_dmar_header *)(dmar + 1);
+
+ while (((unsigned long)entry_header) <
+ (((unsigned long)dmar) + dmar_tbl->length)) {
+ /* Avoid looping forever on bad ACPI tables */
+ if (entry_header->length == 0) {
+ printk(KERN_WARNING PREFIX
+ "Invalid 0-length structure\n");
+ return 0;
+ }
+
+ if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) {
+ drhd = (void *)entry_header;
+ if (!drhd->address) {
+ /* Promote an attitude of violence to a BIOS engineer today */
+ WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ return 0;
+ }
+ break;
+ }
+
+ entry_header = ((void *)entry_header + entry_header->length);
+ }
+ return 1;
+}
+
void __init detect_intel_iommu(void)
{
int ret;
ret = dmar_table_detect();
-
+ if (ret)
+ ret = check_zero_address();
{
#ifdef CONFIG_INTR_REMAP
struct acpi_table_dmar *dmar;
size = PAGE_ALIGN(size);
order = get_order(size);
- flags &= ~(GFP_DMA | GFP_DMA32);
+
+ if (!iommu_no_mapping(hwdev))
+ flags &= ~(GFP_DMA | GFP_DMA32);
+ else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) {
+ if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32))
+ flags |= GFP_DMA;
+ else
+ flags |= GFP_DMA32;
+ }
vaddr = (void *)__get_free_pages(flags, order);
if (!vaddr)
}
#endif /* CONFIG_PM */
+/*
+ * Here we only respond to action of unbound device from driver.
+ *
+ * Added device is not attached to its DMAR domain here yet. That will happen
+ * when mapping the device to iova.
+ */
+static int device_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dmar_domain *domain;
+
+ domain = find_domain(pdev);
+ if (!domain)
+ return 0;
+
+ if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+ domain_remove_one_dev_info(domain, pdev);
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = device_notifier,
+};
+
int __init intel_iommu_init(void)
{
int ret = 0;
register_iommu(&intel_iommu_ops);
+ bus_register_notifier(&pci_bus_type, &device_nb);
+
return 0;
}
clk_enable(rtap->clk);
/* Ack IRQ */
writel(1, rtap->virtbase + COH901331_IRQ_EVENT);
+ /*
+ * Disable the interrupt. This is necessary because
+ * the RTC lives on a lower-clocked line and will
+ * not release the IRQ line until after a few (slower)
+ * clock cycles. The interrupt will be re-enabled when
+ * a new alarm is set anyway.
+ */
+ writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
/* Set alarm flag */
rtc_update_irq(rtap->rtc, 1, RTC_AF);
else
writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
+ return 0;
}
static struct rtc_class_ops coh901331_ops = {
atomic_set(&monpriv->msglim_count, 0);
monpriv->write_index = 0;
monpriv->read_index = 0;
+ dev_set_drvdata(monreader_device, NULL);
for (i = 0; i < MON_MSGLIM; i++)
kfree(monpriv->msg_array[i]);
#include "sclp.h"
+static void (*old_machine_restart)(char *);
+static void (*old_machine_halt)(void);
+static void (*old_machine_power_off)(void);
+
/* Shutdown handler. Signal completion of shutdown by loading special PSW. */
-static void
-do_machine_quiesce(void)
+static void do_machine_quiesce(void)
{
psw_t quiesce_psw;
}
/* Handler for quiesce event. Start shutdown procedure. */
-static void
-sclp_quiesce_handler(struct evbuf_header *evbuf)
+static void sclp_quiesce_handler(struct evbuf_header *evbuf)
{
- _machine_restart = (void *) do_machine_quiesce;
- _machine_halt = do_machine_quiesce;
- _machine_power_off = do_machine_quiesce;
+ if (_machine_restart != (void *) do_machine_quiesce) {
+ old_machine_restart = _machine_restart;
+ old_machine_halt = _machine_halt;
+ old_machine_power_off = _machine_power_off;
+ _machine_restart = (void *) do_machine_quiesce;
+ _machine_halt = do_machine_quiesce;
+ _machine_power_off = do_machine_quiesce;
+ }
ctrl_alt_del();
}
+/* Undo machine restart/halt/power_off modification on resume */
+static void sclp_quiesce_pm_event(struct sclp_register *reg,
+ enum sclp_pm_event sclp_pm_event)
+{
+ switch (sclp_pm_event) {
+ case SCLP_PM_EVENT_RESTORE:
+ if (old_machine_restart) {
+ _machine_restart = old_machine_restart;
+ _machine_halt = old_machine_halt;
+ _machine_power_off = old_machine_power_off;
+ old_machine_restart = NULL;
+ old_machine_halt = NULL;
+ old_machine_power_off = NULL;
+ }
+ break;
+ case SCLP_PM_EVENT_FREEZE:
+ case SCLP_PM_EVENT_THAW:
+ break;
+ }
+}
+
static struct sclp_register sclp_quiesce_event = {
.receive_mask = EVTYP_SIGQUIESCE_MASK,
- .receiver_fn = sclp_quiesce_handler
+ .receiver_fn = sclp_quiesce_handler,
+ .pm_event_fn = sclp_quiesce_pm_event
};
/* Initialize quiesce driver. */
-static int __init
-sclp_quiesce_init(void)
+static int __init sclp_quiesce_init(void)
{
return sclp_register(&sclp_quiesce_event);
}
p1 = encode_entry_baggage(cd, p1, name, namlen, ino);
if (plus)
- p = encode_entryplus_baggage(cd, p1, name, namlen);
+ p1 = encode_entryplus_baggage(cd, p1, name, namlen);
/* determine entry word length and lengths to go in pages */
num_entry_words = p1 - tmp;
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
}
/**
- * pcpu_extend_area_map - extend area map for allocation
- * @chunk: target chunk
+ * pcpu_need_to_extend - determine whether chunk area map needs to be extended
+ * @chunk: chunk of interest
*
- * Extend area map of @chunk so that it can accomodate an allocation.
- * A single allocation can split an area into three areas, so this
- * function makes sure that @chunk->map has at least two extra slots.
+ * Determine whether area map of @chunk needs to be extended to
+ * accomodate a new allocation.
*
* CONTEXT:
- * pcpu_alloc_mutex, pcpu_lock. pcpu_lock is released and reacquired
- * if area map is extended.
+ * pcpu_lock.
*
* RETURNS:
- * 0 if noop, 1 if successfully extended, -errno on failure.
+ * New target map allocation length if extension is necessary, 0
+ * otherwise.
*/
-static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags)
+static int pcpu_need_to_extend(struct pcpu_chunk *chunk)
{
int new_alloc;
- int *new;
- size_t size;
- /* has enough? */
if (chunk->map_alloc >= chunk->map_used + 2)
return 0;
- spin_unlock_irqrestore(&pcpu_lock, *flags);
-
new_alloc = PCPU_DFL_MAP_ALLOC;
while (new_alloc < chunk->map_used + 2)
new_alloc *= 2;
- new = pcpu_mem_alloc(new_alloc * sizeof(new[0]));
- if (!new) {
- spin_lock_irqsave(&pcpu_lock, *flags);
+ return new_alloc;
+}
+
+/**
+ * pcpu_extend_area_map - extend area map of a chunk
+ * @chunk: chunk of interest
+ * @new_alloc: new target allocation length of the area map
+ *
+ * Extend area map of @chunk to have @new_alloc entries.
+ *
+ * CONTEXT:
+ * Does GFP_KERNEL allocation. Grabs and releases pcpu_lock.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc)
+{
+ int *old = NULL, *new = NULL;
+ size_t old_size = 0, new_size = new_alloc * sizeof(new[0]);
+ unsigned long flags;
+
+ new = pcpu_mem_alloc(new_size);
+ if (!new)
return -ENOMEM;
- }
- /*
- * Acquire pcpu_lock and switch to new area map. Only free
- * could have happened inbetween, so map_used couldn't have
- * grown.
- */
- spin_lock_irqsave(&pcpu_lock, *flags);
- BUG_ON(new_alloc < chunk->map_used + 2);
+ /* acquire pcpu_lock and switch to new area map */
+ spin_lock_irqsave(&pcpu_lock, flags);
+
+ if (new_alloc <= chunk->map_alloc)
+ goto out_unlock;
- size = chunk->map_alloc * sizeof(chunk->map[0]);
- memcpy(new, chunk->map, size);
+ old_size = chunk->map_alloc * sizeof(chunk->map[0]);
+ memcpy(new, chunk->map, old_size);
/*
* map_alloc < PCPU_DFL_MAP_ALLOC indicates that the chunk is
* one of the first chunks and still using static map.
*/
if (chunk->map_alloc >= PCPU_DFL_MAP_ALLOC)
- pcpu_mem_free(chunk->map, size);
+ old = chunk->map;
chunk->map_alloc = new_alloc;
chunk->map = new;
+ new = NULL;
+
+out_unlock:
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+
+ /*
+ * pcpu_mem_free() might end up calling vfree() which uses
+ * IRQ-unsafe lock and thus can't be called under pcpu_lock.
+ */
+ pcpu_mem_free(old, old_size);
+ pcpu_mem_free(new, new_size);
+
return 0;
}
static int warn_limit = 10;
struct pcpu_chunk *chunk;
const char *err;
- int slot, off;
+ int slot, off, new_alloc;
unsigned long flags;
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
- if (size > chunk->contig_hint ||
- pcpu_extend_area_map(chunk, &flags) < 0) {
- err = "failed to extend area map of reserved chunk";
+
+ if (size > chunk->contig_hint) {
+ err = "alloc from reserved chunk failed";
goto fail_unlock;
}
+
+ while ((new_alloc = pcpu_need_to_extend(chunk))) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk, new_alloc) < 0) {
+ err = "failed to extend area map of reserved chunk";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ }
+
off = pcpu_alloc_area(chunk, size, align);
if (off >= 0)
goto area_found;
+
err = "alloc from reserved chunk failed";
goto fail_unlock;
}
if (size > chunk->contig_hint)
continue;
- switch (pcpu_extend_area_map(chunk, &flags)) {
- case 0:
- break;
- case 1:
- goto restart; /* pcpu_lock dropped, restart */
- default:
- err = "failed to extend area map";
- goto fail_unlock;
+ new_alloc = pcpu_need_to_extend(chunk);
+ if (new_alloc) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk,
+ new_alloc) < 0) {
+ err = "failed to extend area map";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ /*
+ * pcpu_lock has been dropped, need to
+ * restart cpu_slot list walking.
+ */
+ goto restart;
}
off = pcpu_alloc_area(chunk, size, align);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff