sparc: Remove SBUS layer resource and irq handling.

All the drivers use OF device objects now for this
information.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
index 81ea0f6..8f5900b 100644 (file)
--- a/arch/sparc/include/asm/sbus_32.h
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -51,17 +51,6 @@ struct sbus_dev {
        int prom_node;
        char prom_name[64];
        int slot;
-
-       struct resource resource[PROMREG_MAX];
-
-       struct linux_prom_registers reg_addrs[PROMREG_MAX];
-       int num_registers;
-
-       struct linux_prom_ranges device_ranges[PROMREG_MAX];
-       int num_device_ranges;
-
-       unsigned int irqs[4];
-       int num_irqs;
 };
 #define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
 
@@ -73,9 +62,6 @@ struct sbus_bus {
        int                     prom_node;      /* PROM device tree node for this SBus */
        char                    prom_name[64];  /* Usually "sbus" or "sbi" */
        int                     clock_freq;
-
-       struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-       int num_sbus_ranges;
 };
 #define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
 
@@ -103,7 +89,6 @@ sbus_is_slave(struct sbus_dev *dev)
 void prom_adjust_ranges(struct linux_prom_ranges *, int,
                        struct linux_prom_ranges *, int);
 
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
 extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
 extern int sbus_arch_preinit(void);
 extern void sbus_arch_postinit(void);

diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
index 2b2562e..75f95ff 100644 (file)
--- a/arch/sparc/include/asm/sbus_64.h
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -51,17 +51,6 @@ struct sbus_dev {
        int prom_node;
        char prom_name[64];
        int slot;
-
-       struct resource resource[PROMREG_MAX];
-
-       struct linux_prom_registers reg_addrs[PROMREG_MAX];
-       int num_registers;
-
-       struct linux_prom_ranges device_ranges[PROMREG_MAX];
-       int num_device_ranges;
-
-       unsigned int irqs[4];
-       int num_irqs;
 };
 #define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
 
@@ -73,10 +62,6 @@ struct sbus_bus {
        int                     prom_node;      /* OBP node of SBUS     */
        char                    prom_name[64];  /* Usually "sbus" or "sbi" */
        int                     clock_freq;
-
-       struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-       int num_sbus_ranges;
-
        int portid;
 };
 #define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
@@ -94,7 +79,6 @@ extern struct sbus_bus *sbus_root;
        for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
                for ((device) = (bus)->devices; (device); (device) = (device)->next)
 
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
 extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
 extern int sbus_arch_preinit(void);
 extern void sbus_arch_postinit(void);

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 0e47830..d82a810 100644 (file)
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -394,33 +394,6 @@ void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t s
 }
 
 /* Support code for sbus_init().  */
-/*
- * XXX This functions appears to be a distorted version of
- * prom_sbus_ranges_init(), with all sun4d stuff cut away.
- * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
- */
-/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-       int parent_node = pn->node;
-
-       if (sparc_cpu_model == sun4d) {
-               struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
-               int num_iounit_ranges, len;
-
-               len = prom_getproperty(parent_node, "ranges",
-                                      (char *) iounit_ranges,
-                                      sizeof (iounit_ranges));
-               if (len != -1) {
-                       num_iounit_ranges =
-                               (len / sizeof(struct linux_prom_ranges));
-                       prom_adjust_ranges(sbus->sbus_ranges,
-                                          sbus->num_sbus_ranges,
-                                          iounit_ranges, num_iounit_ranges);
-               }
-       }
-}
-
 void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
 {
 #ifndef CONFIG_SUN4

diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index 60fac2d..0193e38 100644 (file)
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -650,10 +650,6 @@ fatal_memory_error:
        prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
 }
 
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
-}
-
 void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
 {
        sbus_iommu_init(dp->node, sbus);

diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 08f4667..89eb922 100644 (file)
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -51,38 +51,11 @@ static void __init fill_sbus_device_iommu(struct sbus_dev *sdev)
 static void __init fill_sbus_device(struct device_node *dp, struct sbus_dev *sdev)
 {
        struct dev_archdata *sd;
-       unsigned long base;
-       const void *pval;
-       int len, err;
+       int err;
 
        sdev->prom_node = dp->node;
        strcpy(sdev->prom_name, dp->name);
 
-       pval = of_get_property(dp, "reg", &len);
-       sdev->num_registers = 0;
-       if (pval) {
-               memcpy(sdev->reg_addrs, pval, len);
-
-               sdev->num_registers =
-                       len / sizeof(struct linux_prom_registers);
-
-               base = (unsigned long) sdev->reg_addrs[0].phys_addr;
-
-               /* Compute the slot number. */
-               if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m)
-                       sdev->slot = sbus_dev_slot(base);
-               else
-                       sdev->slot = sdev->reg_addrs[0].which_io;
-       }
-
-       pval = of_get_property(dp, "ranges", &len);
-       sdev->num_device_ranges = 0;
-       if (pval) {
-               memcpy(sdev->device_ranges, pval, len);
-               sdev->num_device_ranges =
-                       len / sizeof(struct linux_prom_ranges);
-       }
-
        sd = &sdev->ofdev.dev.archdata;
        sd->prom_node = dp;
        sd->op = &sdev->ofdev;
@@ -105,97 +78,6 @@ static void __init fill_sbus_device(struct device_node *dp, struct sbus_dev *sde
        fill_sbus_device_iommu(sdev);
 }
 
-static void __init sbus_bus_ranges_init(struct device_node *dp, struct sbus_bus *sbus)
-{
-       const void *pval;
-       int len;
-
-       pval = of_get_property(dp, "ranges", &len);
-       sbus->num_sbus_ranges = 0;
-       if (pval) {
-               memcpy(sbus->sbus_ranges, pval, len);
-               sbus->num_sbus_ranges =
-                       len / sizeof(struct linux_prom_ranges);
-
-               sbus_arch_bus_ranges_init(dp->parent, sbus);
-       }
-}
-
-static void __init __apply_ranges_to_regs(struct linux_prom_ranges *ranges,
-                                         int num_ranges,
-                                         struct linux_prom_registers *regs,
-                                         int num_regs)
-{
-       if (num_ranges) {
-               int regnum;
-
-               for (regnum = 0; regnum < num_regs; regnum++) {
-                       int rngnum;
-
-                       for (rngnum = 0; rngnum < num_ranges; rngnum++) {
-                               if (regs[regnum].which_io == ranges[rngnum].ot_child_space)
-                                       break;
-                       }
-                       if (rngnum == num_ranges) {
-                               /* We used to flag this as an error.  Actually
-                                * some devices do not report the regs as we expect.
-                                * For example, see SUNW,pln device.  In that case
-                                * the reg property is in a format internal to that
-                                * node, ie. it is not in the SBUS register space
-                                * per se. -DaveM
-                                */
-                               return;
-                       }
-                       regs[regnum].which_io = ranges[rngnum].ot_parent_space;
-                       regs[regnum].phys_addr -= ranges[rngnum].ot_child_base;
-                       regs[regnum].phys_addr += ranges[rngnum].ot_parent_base;
-               }
-       }
-}
-
-static void __init __fixup_regs_sdev(struct sbus_dev *sdev)
-{
-       if (sdev->num_registers != 0) {
-               struct sbus_dev *parent = sdev->parent;
-               int i;
-
-               while (parent != NULL) {
-                       __apply_ranges_to_regs(parent->device_ranges,
-                                              parent->num_device_ranges,
-                                              sdev->reg_addrs,
-                                              sdev->num_registers);
-
-                       parent = parent->parent;
-               }
-
-               __apply_ranges_to_regs(sdev->bus->sbus_ranges,
-                                      sdev->bus->num_sbus_ranges,
-                                      sdev->reg_addrs,
-                                      sdev->num_registers);
-
-               for (i = 0; i < sdev->num_registers; i++) {
-                       struct resource *res = &sdev->resource[i];
-
-                       res->start = sdev->reg_addrs[i].phys_addr;
-                       res->end = (res->start +
-                                   (unsigned long)sdev->reg_addrs[i].reg_size - 1UL);
-                       res->flags = IORESOURCE_IO |
-                               (sdev->reg_addrs[i].which_io & 0xff);
-               }
-       }
-}
-
-static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
-{
-       struct sbus_dev *sdev;
-
-       for (sdev = first_sdev; sdev; sdev = sdev->next) {
-               if (sdev->child)
-                       sbus_fixup_all_regs(sdev->child);
-               __fixup_regs_sdev(sdev);
-       }
-}
-
 /* We preserve the "probe order" of these bus and device lists to give
  * the same ordering as the old code.
  */
@@ -263,8 +145,6 @@ static void __init build_one_sbus(struct device_node *dp, int num_sbus)
 
        strcpy(sbus->prom_name, dp->name);
 
-       sbus_bus_ranges_init(dp, sbus);
-
        sbus->ofdev.node = dp;
        sbus->ofdev.dev.parent = NULL;
        sbus->ofdev.dev.bus = &sbus_bus_type;
@@ -295,8 +175,6 @@ static void __init build_one_sbus(struct device_node *dp, int num_sbus)
                }
                dev_dp = dev_dp->sibling;
        }
-
-       sbus_fixup_all_regs(sbus->devices);
 }
 
 static int __init sbus_init(void)