dma-mapping.h: add the dma_unmap state API

Adds the following macros:

DECLARE_DMA_UNMAP_ADDR(ADDR_NAME)
DECLARE_DMA_UNMAP_LEN(LEN_NAME)
dma_unmap_addr(PTR, ADDR_NAME)
dma_unmap_addr_set(PTR, ADDR_NAME, VAL)
dma_unmap_len(PTR, LEN_NAME)
dma_unmap_len_set(PTR, LEN_NAME, VAL)

The API corresponds to the pci_unmap state API.  We'll move to this new
generic API from the PCI specific API in the long term.  As
include/asm-generic/pci-dma-compat.h does, the pci_unmap API simply calls
the new generic API for some time.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 364a6cb..29a48fb 100644 (file)
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -472,6 +472,64 @@ void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
        ....
 
 
+Part Ie - Optimizing Unmap State Space Consumption
+--------------------------------
+
+On some platforms, dma_unmap_{single,page}() is simply a nop.
+Therefore, keeping track of the mapping address and length is a waste
+of space. Instead of filling your drivers up with ifdefs and the like
+to "work around" this (which would defeat the whole purpose of a
+portable API) the following facilities are provided.
+
+Actually, instead of describing the macros one by one, we'll
+transform some example code.
+
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
+   Example, before:
+
+       struct ring_state {
+               struct sk_buff *skb;
+               dma_addr_t mapping;
+               __u32 len;
+       };
+
+   after:
+
+       struct ring_state {
+               struct sk_buff *skb;
+               DEFINE_DMA_UNMAP_ADDR(mapping);
+               DEFINE_DMA_UNMAP_LEN(len);
+       };
+
+2) Use dma_unmap_{addr,len}_set to set these values.
+   Example, before:
+
+       ringp->mapping = FOO;
+       ringp->len = BAR;
+
+   after:
+
+       dma_unmap_addr_set(ringp, mapping, FOO);
+       dma_unmap_len_set(ringp, len, BAR);
+
+3) Use dma_unmap_{addr,len} to access these values.
+   Example, before:
+
+       dma_unmap_single(dev, ringp->mapping, ringp->len,
+                        DMA_FROM_DEVICE);
+
+   after:
+
+       dma_unmap_single(dev,
+                        dma_unmap_addr(ringp, mapping),
+                        dma_unmap_len(ringp, len),
+                        DMA_FROM_DEVICE);
+
+It really should be self-explanatory.  We treat the ADDR and LEN
+separately, because it is possible for an implementation to only
+need the address in order to perform the unmap operation.
+
+
 Part II - Advanced dma_ usage
 -----------------------------
 

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 91b7618..c5ac9d4 100644 (file)
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -232,4 +232,20 @@ struct dma_attrs;
 
 #endif /* CONFIG_HAVE_DMA_ATTRS */
 
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
+#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
+#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
+#else
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
+#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
+#define dma_unmap_len(PTR, LEN_NAME)             (0)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
+#endif
+
 #endif

diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
index cfd63ab..549a041 100644 (file)
--- a/include/linux/pci-dma.h
+++ b/include/linux/pci-dma.h
@@ -1,20 +1,11 @@
 #ifndef _LINUX_PCI_DMA_H
 #define _LINUX_PCI_DMA_H
 
-#ifdef CONFIG_NEED_DMA_MAP_STATE
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)           (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)             (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
-#endif
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
+#define pci_unmap_addr             dma_unmap_addr
+#define pci_unmap_addr_set         dma_unmap_addr_set
+#define pci_unmap_len              dma_unmap_len
+#define pci_unmap_len_set          dma_unmap_len_set
 
 #endif