tree-wide: fix a very frequent spelling mistake
authorDirk Hohndel <hohndel@infradead.org>
Tue, 29 Sep 2009 01:43:57 +0000 (21:43 -0400)
committerJiri Kosina <jkosina@suse.cz>
Mon, 9 Nov 2009 08:40:54 +0000 (09:40 +0100)
something-bility is spelled as something-blity
so a grep for 'blit' would find these lines

this is so trivial that I didn't split it by subsystem / copy
additional maintainers - all changes are to comments
The only purpose is to get fewer false positives when grepping
around the kernel sources.

Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
15 files changed:
arch/parisc/kernel/perf.c
arch/powerpc/kernel/vdso.c
arch/powerpc/oprofile/op_model_cell.c
drivers/char/tty_ioctl.c
drivers/isdn/i4l/isdn_net.c
drivers/md/dm-crypt.c
drivers/media/dvb/dvb-core/dvb_net.c
drivers/net/tokenring/ibmtr.c
drivers/net/wireless/orinoco/hermes_dld.c
drivers/scsi/3w-9xxx.c
drivers/scsi/3w-xxxx.c
drivers/scsi/nsp32.c
drivers/uwb/neh.c
net/sched/act_api.c
sound/pci/ice1712/juli.c

index 75099ef..f9f6783 100644 (file)
@@ -24,7 +24,7 @@
  *
  *  This driver programs the PCX-U/PCX-W performance counters
  *  on the PA-RISC 2.0 chips.  The driver keeps all images now
  *
  *  This driver programs the PCX-U/PCX-W performance counters
  *  on the PA-RISC 2.0 chips.  The driver keeps all images now
- *  internally to the kernel to hopefully eliminate the possiblity
+ *  internally to the kernel to hopefully eliminate the possibility
  *  of a bad image halting the CPU.  Also, there are different
  *  images for the PCX-W and later chips vs the PCX-U chips.
  *
  *  of a bad image halting the CPU.  Also, there are different
  *  images for the PCX-W and later chips vs the PCX-U chips.
  *
index 137dc22..d84d192 100644 (file)
@@ -721,7 +721,7 @@ static int __init vdso_init(void)
 
 #ifdef CONFIG_PPC64
        /*
 
 #ifdef CONFIG_PPC64
        /*
-        * Fill up the "systemcfg" stuff for backward compatiblity
+        * Fill up the "systemcfg" stuff for backward compatibility
         */
        strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
        vdso_data->version.major = SYSTEMCFG_MAJOR;
         */
        strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
        vdso_data->version.major = SYSTEMCFG_MAJOR;
index ae06c62..52c98ed 100644 (file)
@@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
         * There is no debug setup required for the cycles event.
         * Note that only events in the same group can be used.
         * Otherwise, there will be conflicts in correctly routing
         * There is no debug setup required for the cycles event.
         * Note that only events in the same group can be used.
         * Otherwise, there will be conflicts in correctly routing
-        * the signals on the debug bus.  It is the responsiblity
+        * the signals on the debug bus.  It is the responsibility
         * of the OProfile user tool to check the events are in
         * the same group.
         */
         * of the OProfile user tool to check the events are in
         * the same group.
         */
index 8e67d5c..6bd5f88 100644 (file)
@@ -315,7 +315,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate);
  *     For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
  *     we need to carefully set the bits when the user does not get the
  *     desired speed. We allow small margins and preserve as much of possible
  *     For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
  *     we need to carefully set the bits when the user does not get the
  *     desired speed. We allow small margins and preserve as much of possible
- *     of the input intent to keep compatiblity.
+ *     of the input intent to keep compatibility.
  *
  *     Locking: Caller should hold termios lock. This is already held
  *     when calling this function from the driver termios handler.
  *
  *     Locking: Caller should hold termios lock. This is already held
  *     when calling this function from the driver termios handler.
index 90b56ed..507e13d 100644 (file)
@@ -1563,7 +1563,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
        *(__be32 *)(p +  4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE);
        *(__be32 *)(p +  8) = cpu_to_be32(lp->cisco_myseq);
        *(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq);
        *(__be32 *)(p +  4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE);
        *(__be32 *)(p +  8) = cpu_to_be32(lp->cisco_myseq);
        *(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq);
-       *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff
+       *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff
        p += 18;
 
        isdn_net_write_super(lp, skb);
        p += 18;
 
        isdn_net_write_super(lp, skb);
index ed10381..e412980 100644 (file)
@@ -988,7 +988,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
                goto bad_cipher;
        }
 
                goto bad_cipher;
        }
 
-       /* Compatiblity mode for old dm-crypt cipher strings */
+       /* Compatibility mode for old dm-crypt cipher strings */
        if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
                chainmode = "cbc";
                ivmode = "plain";
        if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
                chainmode = "cbc";
                ivmode = "plain";
index 0241a7c..8b8558f 100644 (file)
@@ -1396,7 +1396,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file,
                return ret;
        }
 
                return ret;
        }
 
-       /* binary compatiblity cruft */
+       /* binary compatibility cruft */
        case __NET_ADD_IF_OLD:
        {
                struct __dvb_net_if_old *dvbnetif = parg;
        case __NET_ADD_IF_OLD:
        {
                struct __dvb_net_if_old *dvbnetif = parg;
index 75fa32e..685cc3a 100644 (file)
@@ -96,7 +96,7 @@
  *
  *      Change by Mike Sullivan et al.:
  *      + added turbo card support. No need to use lanaid to configure
  *
  *      Change by Mike Sullivan et al.:
  *      + added turbo card support. No need to use lanaid to configure
- *      the adapter into isa compatiblity mode.
+ *      the adapter into isa compatibility mode.
  *
  *      Changes by Burt Silverman to allow the computer to behave nicely when
  *     a cable is pulled or not in place, or a PCMCIA card is removed hot.
  *
  *      Changes by Burt Silverman to allow the computer to behave nicely when
  *     a cable is pulled or not in place, or a PCMCIA card is removed hot.
index a3eefe1..84200da 100644 (file)
@@ -550,7 +550,7 @@ static const struct {                                                       \
 
 #define DEFAULT_PDR(pid) default_pdr_data_##pid
 
 
 #define DEFAULT_PDR(pid) default_pdr_data_##pid
 
-/*  HWIF Compatiblity */
+/*  HWIF Compatibility */
 DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
 
 /* PPPPSign */
 DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
 
 /* PPPPSign */
@@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
                                         record_id + 1, pdi);
                        }
                        break;
                                         record_id + 1, pdi);
                        }
                        break;
-               case 0x5: /*  HWIF Compatiblity */
+               case 0x5: /*  HWIF Compatibility */
                        default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
                        break;
                case 0x108: /* PPPPSign */
                        default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
                        break;
                case 0x108: /* PPPPSign */
index 36c21b1..b59e240 100644 (file)
@@ -732,7 +732,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                break;
        case TW_IOCTL_GET_COMPATIBILITY_INFO:
                tw_ioctl->driver_command.status = 0;
                break;
        case TW_IOCTL_GET_COMPATIBILITY_INFO:
                tw_ioctl->driver_command.status = 0;
-               /* Copy compatiblity struct into ioctl data buffer */
+               /* Copy compatibility struct into ioctl data buffer */
                tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
                memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
                break;
                tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
                memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
                break;
index faa0fcf..ff04821 100644 (file)
@@ -8,7 +8,7 @@
 
    Copyright (C) 1999-2009 3ware Inc.
 
 
    Copyright (C) 1999-2009 3ware Inc.
 
-   Kernel compatiblity By:     Andre Hedrick <andre@suse.com>
+   Kernel compatibility By:    Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000      Andre Hedrick <andre@suse.com>
    
    Further tiny build fixes and trivial hoovering    Alan Cox
    Non-Copyright (C) 2000      Andre Hedrick <andre@suse.com>
    
    Further tiny build fixes and trivial hoovering    Alan Cox
index 2be7d5b..2c98a6e 100644 (file)
@@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
                nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
                /*
                 * TODO: To be implemented improving bus master
                nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
                /*
                 * TODO: To be implemented improving bus master
-                * transfer reliablity when BMCNTERR is occurred in
+                * transfer reliability when BMCNTERR is occurred in
                 * AutoSCSI phase described in specification.
                 */
        }
                 * AutoSCSI phase described in specification.
                 */
        }
index 0af8916..78510a1 100644 (file)
@@ -150,7 +150,7 @@ void uwb_rc_neh_put(struct uwb_rc_neh *neh)
  *      0xff is invalid, so they must not be used. Initialization
  *      fills up those two in the bitmap so they are not allocated.
  *
  *      0xff is invalid, so they must not be used. Initialization
  *      fills up those two in the bitmap so they are not allocated.
  *
- * We spread the allocation around to reduce the posiblity of two
+ * We spread the allocation around to reduce the possibility of two
  * consecutive opened @neh's getting the same context ID assigned (to
  * avoid surprises with late events that timed out long time ago). So
  * first we search from where @rc->ctx_roll is, if not found, we
  * consecutive opened @neh's getting the same context ID assigned (to
  * avoid surprises with late events that timed out long time ago). So
  * first we search from where @rc->ctx_roll is, if not found, we
index 2dfb3e7..5364d0b 100644 (file)
@@ -598,7 +598,7 @@ int tcf_action_copy_stats(struct sk_buff *skb, struct tc_action *a,
                goto errout;
 
        /* compat_mode being true specifies a call that is supposed
                goto errout;
 
        /* compat_mode being true specifies a call that is supposed
-        * to add additional backward compatiblity statistic TLVs.
+        * to add additional backward compatibility statistic TLVs.
         */
        if (compat_mode) {
                if (a->type == TCA_OLD_COMPAT)
         */
        if (compat_mode) {
                if (a->type == TCA_OLD_COMPAT)
index fd948bf..9c0f78e 100644 (file)
@@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {
         * inputs) are fed from Xilinx.
         *
         * I even checked traces on board and coded a support in driver for
         * inputs) are fed from Xilinx.
         *
         * I even checked traces on board and coded a support in driver for
-        * an alternative possiblity - the unused I2S ICE output channels
+        * an alternative possibility - the unused I2S ICE output channels
         * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
         * the DAC - to no avail. The I2S outputs seem to be unconnected.
         *
         * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
         * the DAC - to no avail. The I2S outputs seem to be unconnected.
         *