p54: per-device names
authorChristian Lamparter <chunkeey@web.de>
Sat, 29 Nov 2008 21:39:08 +0000 (22:39 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 5 Dec 2008 14:35:45 +0000 (09:35 -0500)
This patch replaces the static "p54:" strings in front of most printk's
with their corresponding per-device names.

It was always a bit of a hassle to check which device was
generating all the messages.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/p54/p54common.c
drivers/net/wireless/p54/p54usb.c

index 06c8321..89968a5 100644 (file)
@@ -158,21 +158,21 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
                        priv->fw_interface = be32_to_cpup((__be32 *)
                                             bootrec->data);
                        switch (priv->fw_interface) {
-                       case FW_FMAC:
-                               printk(KERN_INFO "p54: FreeMAC firmware\n");
-                               break;
-                       case FW_LM20:
-                               printk(KERN_INFO "p54: LM20 firmware\n");
-                               break;
                        case FW_LM86:
-                               printk(KERN_INFO "p54: LM86 firmware\n");
-                               break;
-                       case FW_LM87:
-                               printk(KERN_INFO "p54: LM87 firmware\n");
+                       case FW_LM20:
+                       case FW_LM87: {
+                               char *iftype = (char *)bootrec->data;
+                               printk(KERN_INFO "%s: p54 detected a LM%c%c "
+                                                "firmware\n",
+                                       wiphy_name(dev->wiphy),
+                                       iftype[2], iftype[3]);
                                break;
+                               }
+                       case FW_FMAC:
                        default:
-                               printk(KERN_INFO "p54: unknown firmware\n");
-                               break;
+                               printk(KERN_ERR "%s: unsupported firmware\n",
+                                       wiphy_name(dev->wiphy));
+                               return -ENODEV;
                        }
                        break;
                case BR_CODE_COMPONENT_VERSION:
@@ -216,13 +216,15 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
        }
 
        if (fw_version)
-               printk(KERN_INFO "p54: FW rev %s - Softmac protocol %x.%x\n",
-                       fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
+               printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
+                       wiphy_name(dev->wiphy), fw_version,
+                       priv->fw_var >> 8, priv->fw_var & 0xff);
 
        if (priv->fw_var < 0x500)
-               printk(KERN_INFO "p54: you are using an obsolete firmware. "
+               printk(KERN_INFO "%s: you are using an obsolete firmware. "
                       "visit http://wireless.kernel.org/en/users/Drivers/p54 "
-                      "and grab one for \"kernel >= 2.6.28\"!\n");
+                      "and grab one for \"kernel >= 2.6.28\"!\n",
+                       wiphy_name(dev->wiphy));
 
        if (priv->fw_var >= 0x300) {
                /* Firmware supports QoS, use it! */
@@ -399,8 +401,9 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
                                err = p54_convert_rev1(dev, curve_data);
                                break;
                        default:
-                               printk(KERN_ERR "p54: unknown curve data "
+                               printk(KERN_ERR "%s: unknown curve data "
                                                "revision %d\n",
+                                               wiphy_name(dev->wiphy),
                                                curve_data->cal_method_rev);
                                err = -ENODEV;
                                break;
@@ -460,7 +463,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
                case PDR_PER_CHANNEL_BASEBAND_REGISTERS:
                        break;
                default:
-                       printk(KERN_INFO "p54: unknown eeprom code : 0x%x\n",
+                       printk(KERN_INFO "%s: unknown eeprom code : 0x%x\n",
+                               wiphy_name(dev->wiphy),
                                le16_to_cpu(entry->code));
                        break;
                }
@@ -470,7 +474,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 
        if (!synth || !priv->iq_autocal || !priv->output_limit ||
            !priv->curve_data) {
-               printk(KERN_ERR "p54: not all required entries found in eeprom!\n");
+               printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
+                       wiphy_name(dev->wiphy));
                err = -EINVAL;
                goto err;
        }
@@ -515,7 +520,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
                priv->curve_data = NULL;
        }
 
-       printk(KERN_ERR "p54: eeprom parse failed!\n");
+       printk(KERN_ERR "%s: eeprom parse failed!\n",
+               wiphy_name(dev->wiphy));
        return err;
 }
 
@@ -1573,28 +1579,23 @@ static int p54_beacon_tim(struct sk_buff *skb)
        struct ieee80211_mgmt *mgmt = (void *)skb->data;
        u8 *pos, *end;
 
-       if (skb->len <= sizeof(mgmt)) {
-               printk(KERN_ERR "p54: beacon is too short!\n");
+       if (skb->len <= sizeof(mgmt))
                return -EINVAL;
-       }
 
        pos = (u8 *)mgmt->u.beacon.variable;
        end = skb->data + skb->len;
        while (pos < end) {
-               if (pos + 2 + pos[1] > end) {
-                       printk(KERN_ERR "p54: parsing beacon failed\n");
+               if (pos + 2 + pos[1] > end)
                        return -EINVAL;
-               }
 
                if (pos[0] == WLAN_EID_TIM) {
                        u8 dtim_len = pos[1];
                        u8 dtim_period = pos[3];
                        u8 *next = pos + 2 + dtim_len;
 
-                       if (dtim_len < 3) {
-                               printk(KERN_ERR "p54: invalid dtim len!\n");
+                       if (dtim_len < 3)
                                return -EINVAL;
-                       }
+
                        memmove(pos, next, end - next);
 
                        if (dtim_len > 3)
index 21ba526..e9630b9 100644 (file)
@@ -405,7 +405,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 
        tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
        if (!buf) {
-               printk(KERN_ERR "p54usb: cannot allocate firmware upload buffer!\n");
+               dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
+                                         "upload buffer!\n");
                err = -ENOMEM;
                goto err_bufalloc;
        }
@@ -413,13 +414,14 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
        memcpy(buf, start_string, 4);
        err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4);
        if (err) {
-               printk(KERN_ERR "p54usb: reset failed! (%d)\n", err);
+               dev_err(&priv->udev->dev, "(p54usb) reset failed! (%d)\n", err);
                goto err_reset;
        }
 
        err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev);
        if (err) {
-               printk(KERN_ERR "p54usb: cannot find firmware (isl3887usb)\n");
+               dev_err(&priv->udev->dev, "p54usb: cannot find firmware "
+                                         "(isl3887usb)\n");
                err = request_firmware(&fw_entry, "isl3887usb_bare",
                        &priv->udev->dev);
                if (err)
@@ -474,7 +476,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 
                err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size);
                if (err) {
-                       printk(KERN_ERR "p54usb: firmware upload failed!\n");
+                       dev_err(&priv->udev->dev, "(p54usb) firmware "
+                                                 "upload failed!\n");
                        goto err_upload_failed;
                }
 
@@ -485,10 +488,9 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
        *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
        err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
        if (err) {
-               printk(KERN_ERR "p54usb: firmware upload failed!\n");
+               dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n");
                goto err_upload_failed;
        }
-
        timeout = jiffies + msecs_to_jiffies(1000);
        while (!(err = usb_bulk_msg(priv->udev,
                usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) {
@@ -496,25 +498,27 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
                        break;
 
                if (alen > 5 && !memcmp(buf, "ERROR", 5)) {
-                       printk(KERN_INFO "p54usb: firmware upload failed!\n");
                        err = -EINVAL;
                        break;
                }
 
                if (time_after(jiffies, timeout)) {
-                       printk(KERN_ERR "p54usb: firmware boot timed out!\n");
+                       dev_err(&priv->udev->dev, "(p54usb) firmware boot "
+                                                 "timed out!\n");
                        err = -ETIMEDOUT;
                        break;
                }
        }
-       if (err)
+       if (err) {
+               dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n");
                goto err_upload_failed;
+       }
 
        buf[0] = 'g';
        buf[1] = '\r';
        err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2);
        if (err) {
-               printk(KERN_ERR "p54usb: firmware boot failed!\n");
+               dev_err(&priv->udev->dev, "(p54usb) firmware boot failed!\n");
                goto err_upload_failed;
        }
 
@@ -554,13 +558,15 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 
        buf = kmalloc(512, GFP_KERNEL);
        if (!buf) {
-               printk(KERN_ERR "p54usb: firmware buffer alloc failed!\n");
+               dev_err(&priv->udev->dev, "(p54usb) firmware buffer "
+                                         "alloc failed!\n");
                return -ENOMEM;
        }
 
        err = request_firmware(&fw_entry, "isl3886usb", &priv->udev->dev);
        if (err) {
-               printk(KERN_ERR "p54usb: cannot find firmware (isl3886usb)\n");
+               dev_err(&priv->udev->dev, "(p54usb) cannot find firmware "
+                                         "(isl3886usb)\n");
                err = request_firmware(&fw_entry, "isl3890usb",
                        &priv->udev->dev);
                if (err) {
@@ -685,8 +691,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 
                err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len);
                if (err) {
-                       printk(KERN_ERR "p54usb: firmware block upload "
-                              "failed\n");
+                       dev_err(&priv->udev->dev, "(p54usb) firmware block "
+                                                 "upload failed\n");
                        goto fail;
                }
 
@@ -719,8 +725,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
                          0x002C | (unsigned long)&devreg->direct_mem_win);
                if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) ||
                    !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) {
-                       printk(KERN_ERR "p54usb: firmware DMA transfer "
-                              "failed\n");
+                       dev_err(&priv->udev->dev, "(p54usb) firmware DMA "
+                                                 "transfer failed\n");
                        goto fail;
                }
 
@@ -825,8 +831,9 @@ static int __devinit p54u_probe(struct usb_interface *intf,
        unsigned int i, recognized_pipes;
 
        dev = p54_init_common(sizeof(*priv));
+
        if (!dev) {
-               printk(KERN_ERR "p54usb: ieee80211 alloc failed\n");
+               dev_err(&udev->dev, "(p54usb) ieee80211 alloc failed\n");
                return -ENOMEM;
        }
 
@@ -887,7 +894,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 
        err = ieee80211_register_hw(dev);
        if (err) {
-               printk(KERN_ERR "p54usb: Cannot register netdevice\n");
+               dev_err(&udev->dev, "(p54usb) Cannot register netdevice\n");
                goto err_free_dev;
        }