/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
* Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2005-2008 Solarflare Communications Inc.
+ * Copyright 2005-2009 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/timer.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/highmem.h>
#include <linux/workqueue.h>
-#include <linux/inet_lro.h>
+#include <linux/i2c.h>
#include "enum.h"
#include "bitfield.h"
-#include "i2c-direct.h"
-
-#define EFX_MAX_LRO_DESCRIPTORS 8
-#define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS
/**************************************************************************
*
#ifndef EFX_DRIVER_NAME
#define EFX_DRIVER_NAME "sfc"
#endif
-#define EFX_DRIVER_VERSION "2.2.0136"
+#define EFX_DRIVER_VERSION "3.0"
#ifdef EFX_ENABLE_DEBUG
#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
#define EFX_LOG_RL(efx, fmt, args...) \
do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
-/* Kernel headers may redefine inline anyway */
-#ifndef inline
-#define inline inline __attribute__ ((always_inline))
-#endif
-
/**************************************************************************
*
* Efx data structures
**************************************************************************/
#define EFX_MAX_CHANNELS 32
-#define EFX_MAX_TX_QUEUES 1
#define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
+#define EFX_TX_QUEUE_OFFLOAD_CSUM 0
+#define EFX_TX_QUEUE_NO_CSUM 1
+#define EFX_TX_QUEUE_COUNT 2
+
/**
* struct efx_special_buffer - An Efx special buffer
* @addr: CPU base address of the buffer
* Special buffers are used for the event queues and the TX and RX
* descriptor queues for each channel. They are *not* used for the
* actual transmit and receive buffers.
- *
- * Note that for Falcon, TX and RX descriptor queues live in host memory.
- * Allocation and freeing procedures must take this into account.
*/
struct efx_special_buffer {
void *addr;
int entries;
};
+enum efx_flush_state {
+ FLUSH_NONE,
+ FLUSH_PENDING,
+ FLUSH_FAILED,
+ FLUSH_DONE,
+};
+
/**
* struct efx_tx_buffer - An Efx TX buffer
* @skb: The associated socket buffer.
* This field is zero when the queue slot is empty.
* @continuation: True if this fragment is not the end of a packet.
* @unmap_single: True if pci_unmap_single should be used.
- * @unmap_addr: DMA address to unmap
* @unmap_len: Length of this fragment to unmap
*/
struct efx_tx_buffer {
struct efx_tso_header *tsoh;
dma_addr_t dma_addr;
unsigned short len;
- unsigned char continuation;
- unsigned char unmap_single;
- dma_addr_t unmap_addr;
+ bool continuation;
+ bool unmap_single;
unsigned short unmap_len;
};
*
* @efx: The associated Efx NIC
* @queue: DMA queue number
- * @used: Queue is used by net driver
* @channel: The associated channel
* @buffer: The software buffer ring
* @txd: The hardware descriptor ring
+ * @flushed: Used when handling queue flushing
* @read_count: Current read pointer.
* This is the number of buffers that have been removed from both rings.
- * @stopped: Stopped flag.
+ * @stopped: Stopped count.
* Set if this TX queue is currently stopping its port.
* @insert_count: Current insert pointer
* This is the number of buffers that have been added to the
/* Members which don't change on the fast path */
struct efx_nic *efx ____cacheline_aligned_in_smp;
int queue;
- int used;
struct efx_channel *channel;
struct efx_nic *nic;
struct efx_tx_buffer *buffer;
struct efx_special_buffer txd;
+ enum efx_flush_state flushed;
/* Members used mainly on the completion path */
unsigned int read_count ____cacheline_aligned_in_smp;
* struct efx_rx_queue - An Efx RX queue
* @efx: The associated Efx NIC
* @queue: DMA queue number
- * @used: Queue is used by net driver
* @channel: The associated channel
* @buffer: The software buffer ring
* @rxd: The hardware descriptor ring
* the remaining space in the allocation.
* @buf_dma_addr: Page's DMA address.
* @buf_data: Page's host address.
+ * @flushed: Use when handling queue flushing
*/
struct efx_rx_queue {
struct efx_nic *efx;
int queue;
- int used;
struct efx_channel *channel;
struct efx_rx_buffer *buffer;
struct efx_special_buffer rxd;
struct page *buf_page;
dma_addr_t buf_dma_addr;
char *buf_data;
+ enum efx_flush_state flushed;
};
/**
* @dma_addr: DMA base address of the buffer
* @len: Buffer length, in bytes
*
- * Falcon uses these buffers for its interrupt status registers and
+ * The NIC uses these buffers for its interrupt status registers and
* MAC stats dumps.
*/
struct efx_buffer {
* queue.
*
* @efx: Associated Efx NIC
- * @evqnum: Event queue number
* @channel: Channel instance number
+ * @name: Name for channel and IRQ
* @used_flags: Channel is used by net driver
* @enabled: Channel enabled indicator
* @irq: IRQ number (MSI and MSI-X only)
- * @has_interrupt: Channel has an interrupt
- * @irq_moderation: IRQ moderation value (in us)
+ * @irq_moderation: IRQ moderation value (in hardware ticks)
* @napi_dev: Net device used with NAPI
* @napi_str: NAPI control structure
* @reset_work: Scheduled reset work thread
* @eventq_read_ptr: Event queue read pointer
* @last_eventq_read_ptr: Last event queue read pointer value.
* @eventq_magic: Event queue magic value for driver-generated test events
- * @lro_mgr: LRO state
+ * @irq_count: Number of IRQs since last adaptive moderation decision
+ * @irq_mod_score: IRQ moderation score
* @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
* and diagnostic counters
* @rx_alloc_push_pages: RX allocation method currently in use for pushing
* descriptors
- * @rx_alloc_pop_pages: RX allocation method currently in use for popping
- * descriptors
* @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
- * @n_rx_ip_frag_err: Count of RX IP fragment errors
* @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
* @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
+ * @n_rx_mcast_mismatch: Count of unmatched multicast frames
* @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
* @n_rx_overlength: Count of RX_OVERLENGTH errors
* @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
*/
struct efx_channel {
struct efx_nic *efx;
- int evqnum;
int channel;
+ char name[IFNAMSIZ + 6];
int used_flags;
- int enabled;
+ bool enabled;
int irq;
- unsigned int has_interrupt;
unsigned int irq_moderation;
struct net_device *napi_dev;
struct napi_struct napi_str;
- struct work_struct reset_work;
- int work_pending;
+ bool work_pending;
struct efx_special_buffer eventq;
unsigned int eventq_read_ptr;
unsigned int last_eventq_read_ptr;
unsigned int eventq_magic;
- struct net_lro_mgr lro_mgr;
+ unsigned int irq_count;
+ unsigned int irq_mod_score;
+
int rx_alloc_level;
int rx_alloc_push_pages;
- int rx_alloc_pop_pages;
unsigned n_rx_tobe_disc;
- unsigned n_rx_ip_frag_err;
unsigned n_rx_ip_hdr_chksum_err;
unsigned n_rx_tcp_udp_chksum_err;
+ unsigned n_rx_mcast_mismatch;
unsigned n_rx_frm_trunc;
unsigned n_rx_overlength;
unsigned n_skbuff_leaks;
* access with prefetches.
*/
struct efx_rx_buffer *rx_pkt;
- int rx_pkt_csummed;
+ bool rx_pkt_csummed;
};
-/**
- * struct efx_blinker - S/W LED blinking context
- * @led_num: LED ID (board-specific meaning)
- * @state: Current state - on or off
- * @resubmit: Timer resubmission flag
- * @timer: Control timer for blinking
- */
-struct efx_blinker {
- int led_num;
- int state;
- int resubmit;
- struct timer_list timer;
+enum efx_led_mode {
+ EFX_LED_OFF = 0,
+ EFX_LED_ON = 1,
+ EFX_LED_DEFAULT = 2
};
+#define STRING_TABLE_LOOKUP(val, member) \
+ ((val) < member ## _max) ? member ## _names[val] : "(invalid)"
-/**
- * struct efx_board - board information
- * @type: Board model type
- * @major: Major rev. ('A', 'B' ...)
- * @minor: Minor rev. (0, 1, ...)
- * @init: Initialisation function
- * @init_leds: Sets up board LEDs
- * @set_fault_led: Turns the fault LED on or off
- * @blink: Starts/stops blinking
- * @blinker: used to blink LEDs in software
- */
-struct efx_board {
- int type;
- int major;
- int minor;
- int (*init) (struct efx_nic *nic);
- /* As the LEDs are typically attached to the PHY, LEDs
- * have a separate init callback that happens later than
- * board init. */
- int (*init_leds)(struct efx_nic *efx);
- void (*set_fault_led) (struct efx_nic *efx, int state);
- void (*blink) (struct efx_nic *efx, int start);
- struct efx_blinker blinker;
-};
+extern const char *efx_loopback_mode_names[];
+extern const unsigned int efx_loopback_mode_max;
+#define LOOPBACK_MODE(efx) \
+ STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode)
-#define STRING_TABLE_LOOKUP(val, member) \
- member ## _names[val]
+extern const char *efx_interrupt_mode_names[];
+extern const unsigned int efx_interrupt_mode_max;
+#define INT_MODE(efx) \
+ STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode)
+
+extern const char *efx_reset_type_names[];
+extern const unsigned int efx_reset_type_max;
+#define RESET_TYPE(type) \
+ STRING_TABLE_LOOKUP(type, efx_reset_type)
enum efx_int_mode {
/* Be careful if altering to correct macro below */
};
#define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
-enum phy_type {
- PHY_TYPE_NONE = 0,
- PHY_TYPE_CX4_RTMR = 1,
- PHY_TYPE_1G_ALASKA = 2,
- PHY_TYPE_10XPRESS = 3,
- PHY_TYPE_XFP = 4,
- PHY_TYPE_PM8358 = 6,
- PHY_TYPE_MAX /* Insert any new items before this */
-};
-
-#define PHY_ADDR_INVALID 0xff
+#define EFX_IS10G(efx) ((efx)->link_state.speed == 10000)
enum nic_state {
STATE_INIT = 0,
STATE_RUNNING = 1,
STATE_FINI = 2,
- STATE_RESETTING = 3, /* rtnl_lock always held */
- STATE_DISABLED = 4,
+ STATE_DISABLED = 3,
STATE_MAX,
};
* This is the equivalent of NET_IP_ALIGN [which controls the alignment
* of the skb->head for hardware DMA].
*/
-#if defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
#define EFX_PAGE_IP_ALIGN 0
#else
#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
/* Pseudo bit-mask flow control field */
enum efx_fc_type {
- EFX_FC_RX = 1,
- EFX_FC_TX = 2,
+ EFX_FC_RX = FLOW_CTRL_RX,
+ EFX_FC_TX = FLOW_CTRL_TX,
EFX_FC_AUTO = 4,
};
/**
+ * struct efx_link_state - Current state of the link
+ * @up: Link is up
+ * @fd: Link is full-duplex
+ * @fc: Actual flow control flags
+ * @speed: Link speed (Mbps)
+ */
+struct efx_link_state {
+ bool up;
+ bool fd;
+ enum efx_fc_type fc;
+ unsigned int speed;
+};
+
+static inline bool efx_link_state_equal(const struct efx_link_state *left,
+ const struct efx_link_state *right)
+{
+ return left->up == right->up && left->fd == right->fd &&
+ left->fc == right->fc && left->speed == right->speed;
+}
+
+/**
+ * struct efx_mac_operations - Efx MAC operations table
+ * @reconfigure: Reconfigure MAC. Serialised by the mac_lock
+ * @update_stats: Update statistics
+ * @check_fault: Check fault state. True if fault present.
+ */
+struct efx_mac_operations {
+ int (*reconfigure) (struct efx_nic *efx);
+ void (*update_stats) (struct efx_nic *efx);
+ bool (*check_fault)(struct efx_nic *efx);
+};
+
+/**
* struct efx_phy_operations - Efx PHY operations table
+ * @probe: Probe PHY and initialise efx->mdio.mode_support, efx->mdio.mmds,
+ * efx->loopback_modes.
* @init: Initialise PHY
* @fini: Shut down PHY
* @reconfigure: Reconfigure PHY (e.g. for new link parameters)
- * @clear_interrupt: Clear down interrupt
- * @blink: Blink LEDs
- * @check_hw: Check hardware
- * @reset_xaui: Reset XAUI side of PHY for (software sequenced reset)
- * @mmds: MMD presence mask
- * @loopbacks: Supported loopback modes mask
+ * @poll: Update @link_state and report whether it changed.
+ * Serialised by the mac_lock.
+ * @get_settings: Get ethtool settings. Serialised by the mac_lock.
+ * @set_settings: Set ethtool settings. Serialised by the mac_lock.
+ * @set_npage_adv: Set abilities advertised in (Extended) Next Page
+ * (only needed where AN bit is set in mmds)
+ * @test_alive: Test that PHY is 'alive' (online)
+ * @test_name: Get the name of a PHY-specific test/result
+ * @run_tests: Run tests and record results as appropriate (offline).
+ * Flags are the ethtool tests flags.
*/
struct efx_phy_operations {
+ int (*probe) (struct efx_nic *efx);
int (*init) (struct efx_nic *efx);
void (*fini) (struct efx_nic *efx);
- void (*reconfigure) (struct efx_nic *efx);
- void (*clear_interrupt) (struct efx_nic *efx);
- int (*check_hw) (struct efx_nic *efx);
- void (*reset_xaui) (struct efx_nic *efx);
- int mmds;
- unsigned loopbacks;
+ void (*remove) (struct efx_nic *efx);
+ int (*reconfigure) (struct efx_nic *efx);
+ bool (*poll) (struct efx_nic *efx);
+ void (*get_settings) (struct efx_nic *efx,
+ struct ethtool_cmd *ecmd);
+ int (*set_settings) (struct efx_nic *efx,
+ struct ethtool_cmd *ecmd);
+ void (*set_npage_adv) (struct efx_nic *efx, u32);
+ int (*test_alive) (struct efx_nic *efx);
+ const char *(*test_name) (struct efx_nic *efx, unsigned int index);
+ int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
+};
+
+/**
+ * @enum efx_phy_mode - PHY operating mode flags
+ * @PHY_MODE_NORMAL: on and should pass traffic
+ * @PHY_MODE_TX_DISABLED: on with TX disabled
+ * @PHY_MODE_LOW_POWER: set to low power through MDIO
+ * @PHY_MODE_OFF: switched off through external control
+ * @PHY_MODE_SPECIAL: on but will not pass traffic
+ */
+enum efx_phy_mode {
+ PHY_MODE_NORMAL = 0,
+ PHY_MODE_TX_DISABLED = 1,
+ PHY_MODE_LOW_POWER = 2,
+ PHY_MODE_OFF = 4,
+ PHY_MODE_SPECIAL = 8,
};
+static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
+{
+ return !!(mode & ~PHY_MODE_TX_DISABLED);
+}
+
/*
* Efx extended statistics
*
* @pci_dev: The PCI device
* @type: Controller type attributes
* @legacy_irq: IRQ number
- * @workqueue: Workqueue for resets, port reconfigures and the HW monitor
+ * @workqueue: Workqueue for port reconfigures and the HW monitor.
+ * Work items do not hold and must not acquire RTNL.
+ * @workqueue_name: Name of workqueue
* @reset_work: Scheduled reset workitem
* @monitor_work: Hardware monitor workitem
* @membase_phys: Memory BAR value as physical address
* @membase: Memory BAR value
* @biu_lock: BIU (bus interface unit) lock
* @interrupt_mode: Interrupt mode
- * @i2c: I2C interface
- * @board_info: Board-level information
+ * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
+ * @irq_rx_moderation: IRQ moderation time for RX event queues
* @state: Device state flag. Serialised by the rtnl_lock.
* @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
* @tx_queue: TX DMA queues
* @rx_queue: RX DMA queues
* @channel: Channels
- * @rss_queues: Number of RSS queues
+ * @next_buffer_table: First available buffer table id
+ * @n_rx_queues: Number of RX queues
+ * @n_channels: Number of channels in use
* @rx_buffer_len: RX buffer length
* @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @int_error_count: Number of internal errors seen recently
+ * @int_error_expire: Time at which error count will be expired
* @irq_status: Interrupt status buffer
* @last_irq_cpu: Last CPU to handle interrupt.
* This register is written with the SMP processor ID whenever an
- * interrupt is handled. It is used by falcon_test_interrupt()
+ * interrupt is handled. It is used by efx_nic_test_interrupt()
* to verify that an interrupt has occurred.
+ * @spi_flash: SPI flash device
+ * This field will be %NULL if no flash device is present (or for Siena).
+ * @spi_eeprom: SPI EEPROM device
+ * This field will be %NULL if no EEPROM device is present (or for Siena).
+ * @spi_lock: SPI bus lock
+ * @mtd_list: List of MTDs attached to the NIC
* @n_rx_nodesc_drop_cnt: RX no descriptor drop count
* @nic_data: Hardware dependant state
- * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and
- * efx_reconfigure_port()
+ * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
+ * @port_inhibited, efx_monitor() and efx_reconfigure_port()
* @port_enabled: Port enabled indicator.
- * Serialises efx_stop_all(), efx_start_all() and efx_monitor() and
- * efx_reconfigure_work with kernel interfaces. Safe to read under any
+ * Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
+ * efx_mac_work() with kernel interfaces. Safe to read under any
* one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
* be held to modify it.
+ * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
* @port_initialized: Port initialized?
* @net_dev: Operating system network device. Consider holding the rtnl lock
* @rx_checksum_enabled: RX checksumming enabled
* can provide. Generic code converts these into a standard
* &struct net_device_stats.
* @stats_buffer: DMA buffer for statistics
- * @stats_lock: Statistics update lock
+ * @stats_lock: Statistics update lock. Serialises statistics fetches
+ * @mac_op: MAC interface
* @mac_address: Permanent MAC address
* @phy_type: PHY type
- * @phy_lock: PHY access lock
+ * @mdio_lock: MDIO lock
* @phy_op: PHY interface
* @phy_data: PHY private data (including PHY-specific stats)
- * @mii: PHY interface
- * @tx_disabled: PHY transmitter turned off
- * @link_up: Link status
- * @link_options: Link options (MII/GMII format)
+ * @mdio: PHY MDIO interface
+ * @mdio_bus: PHY MDIO bus ID (only used by Siena)
+ * @phy_mode: PHY operating mode. Serialised by @mac_lock.
+ * @xmac_poll_required: XMAC link state needs polling
+ * @link_advertising: Autonegotiation advertising flags
+ * @link_state: Current state of the link
* @n_link_state_changes: Number of times the link has changed state
* @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
* @multicast_hash: Multicast hash table
- * @flow_control: Flow control flags - separate RX/TX so can't use link_options
- * @reconfigure_work: work item for dealing with PHY events
+ * @wanted_fc: Wanted flow control flags
+ * @mac_work: Work item for changing MAC promiscuity and multicast hash
* @loopback_mode: Loopback status
* @loopback_modes: Supported loopback mode bitmask
* @loopback_selftest: Offline self-test private state
*
- * The @priv field of the corresponding &struct net_device points to
- * this.
+ * This is stored in the private area of the &struct net_device.
*/
struct efx_nic {
char name[IFNAMSIZ];
const struct efx_nic_type *type;
int legacy_irq;
struct workqueue_struct *workqueue;
+ char workqueue_name[16];
struct work_struct reset_work;
struct delayed_work monitor_work;
- unsigned long membase_phys;
+ resource_size_t membase_phys;
void __iomem *membase;
spinlock_t biu_lock;
enum efx_int_mode interrupt_mode;
-
- struct efx_i2c_interface i2c;
- struct efx_board board_info;
+ bool irq_rx_adaptive;
+ unsigned int irq_rx_moderation;
enum nic_state state;
enum reset_type reset_pending;
- struct efx_tx_queue tx_queue[EFX_MAX_TX_QUEUES];
+ struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT];
struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
struct efx_channel channel[EFX_MAX_CHANNELS];
- int rss_queues;
+ unsigned next_buffer_table;
+ int n_rx_queues;
+ int n_channels;
unsigned int rx_buffer_len;
unsigned int rx_buffer_order;
+ unsigned int_error_count;
+ unsigned long int_error_expire;
+
struct efx_buffer irq_status;
volatile signed int last_irq_cpu;
+ unsigned long irq_zero_count;
+
+ struct efx_spi_device *spi_flash;
+ struct efx_spi_device *spi_eeprom;
+ struct mutex spi_lock;
+#ifdef CONFIG_SFC_MTD
+ struct list_head mtd_list;
+#endif
unsigned n_rx_nodesc_drop_cnt;
void *nic_data;
struct mutex mac_lock;
- int port_enabled;
+ struct work_struct mac_work;
+ bool port_enabled;
+ bool port_inhibited;
- int port_initialized;
+ bool port_initialized;
struct net_device *net_dev;
- int rx_checksum_enabled;
+ bool rx_checksum_enabled;
atomic_t netif_stop_count;
spinlock_t netif_stop_lock;
struct efx_buffer stats_buffer;
spinlock_t stats_lock;
+ struct efx_mac_operations *mac_op;
unsigned char mac_address[ETH_ALEN];
- enum phy_type phy_type;
- spinlock_t phy_lock;
+ unsigned int phy_type;
+ struct mutex mdio_lock;
struct efx_phy_operations *phy_op;
void *phy_data;
- struct mii_if_info mii;
- unsigned tx_disabled;
+ struct mdio_if_info mdio;
+ unsigned int mdio_bus;
+ enum efx_phy_mode phy_mode;
- int link_up;
- unsigned int link_options;
+ bool xmac_poll_required;
+ u32 link_advertising;
+ struct efx_link_state link_state;
unsigned int n_link_state_changes;
- int promiscuous;
+ bool promiscuous;
union efx_multicast_hash multicast_hash;
- enum efx_fc_type flow_control;
- struct work_struct reconfigure_work;
+ enum efx_fc_type wanted_fc;
atomic_t rx_reset;
enum efx_loopback_mode loopback_mode;
- unsigned int loopback_modes;
+ u64 loopback_modes;
void *loopback_selftest;
};
return efx_dev_registered(efx) ? efx->name : "";
}
+static inline unsigned int efx_port_num(struct efx_nic *efx)
+{
+ return PCI_FUNC(efx->pci_dev->devfn);
+}
+
/**
* struct efx_nic_type - Efx device type definition
- * @mem_bar: Memory BAR number
+ * @probe: Probe the controller
+ * @remove: Free resources allocated by probe()
+ * @init: Initialise the controller
+ * @fini: Shut down the controller
+ * @monitor: Periodic function for polling link state and hardware monitor
+ * @reset: Reset the controller hardware and possibly the PHY. This will
+ * be called while the controller is uninitialised.
+ * @probe_port: Probe the MAC and PHY
+ * @remove_port: Free resources allocated by probe_port()
+ * @prepare_flush: Prepare the hardware for flushing the DMA queues
+ * @update_stats: Update statistics not provided by event handling
+ * @start_stats: Start the regular fetching of statistics
+ * @stop_stats: Stop the regular fetching of statistics
+ * @set_id_led: Set state of identifying LED or revert to automatic function
+ * @push_irq_moderation: Apply interrupt moderation value
+ * @push_multicast_hash: Apply multicast hash table
+ * @reconfigure_port: Push loopback/power/txdis changes to the MAC and PHY
+ * @get_wol: Get WoL configuration from driver state
+ * @set_wol: Push WoL configuration to the NIC
+ * @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
+ * @test_registers: Test read/write functionality of control registers
+ * @test_nvram: Test validity of NVRAM contents
+ * @default_mac_ops: efx_mac_operations to set at startup
+ * @revision: Hardware architecture revision
* @mem_map_size: Memory BAR mapped size
* @txd_ptr_tbl_base: TX descriptor ring base address
* @rxd_ptr_tbl_base: RX descriptor ring base address
* @buf_tbl_base: Buffer table base address
* @evq_ptr_tbl_base: Event queue pointer table base address
* @evq_rptr_tbl_base: Event queue read-pointer table base address
- * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1)
- * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1)
- * @evq_size: Event queue size (must be a power of two)
* @max_dma_mask: Maximum possible DMA mask
- * @tx_dma_mask: TX DMA mask
- * @bug5391_mask: Address mask for bug 5391 workaround
- * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes)
- * @rx_xon_thresh: RX FIFO XON watermark (bytes)
* @rx_buffer_padding: Padding added to each RX buffer
* @max_interrupt_mode: Highest capability interrupt mode supported
* from &enum efx_init_mode.
* @phys_addr_channels: Number of channels with physically addressed
* descriptors
+ * @tx_dc_base: Base address in SRAM of TX queue descriptor caches
+ * @rx_dc_base: Base address in SRAM of RX queue descriptor caches
+ * @offload_features: net_device feature flags for protocol offload
+ * features implemented in hardware
+ * @reset_world_flags: Flags for additional components covered by
+ * reset method RESET_TYPE_WORLD
*/
struct efx_nic_type {
- unsigned int mem_bar;
+ int (*probe)(struct efx_nic *efx);
+ void (*remove)(struct efx_nic *efx);
+ int (*init)(struct efx_nic *efx);
+ void (*fini)(struct efx_nic *efx);
+ void (*monitor)(struct efx_nic *efx);
+ int (*reset)(struct efx_nic *efx, enum reset_type method);
+ int (*probe_port)(struct efx_nic *efx);
+ void (*remove_port)(struct efx_nic *efx);
+ void (*prepare_flush)(struct efx_nic *efx);
+ void (*update_stats)(struct efx_nic *efx);
+ void (*start_stats)(struct efx_nic *efx);
+ void (*stop_stats)(struct efx_nic *efx);
+ void (*set_id_led)(struct efx_nic *efx, enum efx_led_mode mode);
+ void (*push_irq_moderation)(struct efx_channel *channel);
+ void (*push_multicast_hash)(struct efx_nic *efx);
+ int (*reconfigure_port)(struct efx_nic *efx);
+ void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
+ int (*set_wol)(struct efx_nic *efx, u32 type);
+ void (*resume_wol)(struct efx_nic *efx);
+ int (*test_registers)(struct efx_nic *efx);
+ int (*test_nvram)(struct efx_nic *efx);
+ struct efx_mac_operations *default_mac_ops;
+
+ int revision;
unsigned int mem_map_size;
unsigned int txd_ptr_tbl_base;
unsigned int rxd_ptr_tbl_base;
unsigned int buf_tbl_base;
unsigned int evq_ptr_tbl_base;
unsigned int evq_rptr_tbl_base;
-
- unsigned int txd_ring_mask;
- unsigned int rxd_ring_mask;
- unsigned int evq_size;
- dma_addr_t max_dma_mask;
- unsigned int tx_dma_mask;
- unsigned bug5391_mask;
-
- int rx_xoff_thresh;
- int rx_xon_thresh;
+ u64 max_dma_mask;
unsigned int rx_buffer_padding;
unsigned int max_interrupt_mode;
unsigned int phys_addr_channels;
+ unsigned int tx_dc_base;
+ unsigned int rx_dc_base;
+ unsigned long offload_features;
+ u32 reset_world_flags;
};
/**************************************************************************
continue; \
else
-/* Iterate over all used channels with interrupts */
-#define efx_for_each_channel_with_interrupt(_channel, _efx) \
- for (_channel = &_efx->channel[0]; \
- _channel < &_efx->channel[EFX_MAX_CHANNELS]; \
- _channel++) \
- if (!(_channel->used_flags && _channel->has_interrupt)) \
- continue; \
- else
-
/* Iterate over all used TX queues */
#define efx_for_each_tx_queue(_tx_queue, _efx) \
for (_tx_queue = &_efx->tx_queue[0]; \
- _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES]; \
- _tx_queue++) \
- if (!_tx_queue->used) \
- continue; \
- else
+ _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT]; \
+ _tx_queue++)
/* Iterate over all TX queues belonging to a channel */
#define efx_for_each_channel_tx_queue(_tx_queue, _channel) \
for (_tx_queue = &_channel->efx->tx_queue[0]; \
- _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES]; \
+ _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT]; \
_tx_queue++) \
- if ((!_tx_queue->used) || \
- (_tx_queue->channel != _channel)) \
+ if (_tx_queue->channel != _channel) \
continue; \
else
/* Iterate over all used RX queues */
#define efx_for_each_rx_queue(_rx_queue, _efx) \
for (_rx_queue = &_efx->rx_queue[0]; \
- _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES]; \
- _rx_queue++) \
- if (!_rx_queue->used) \
- continue; \
- else
+ _rx_queue < &_efx->rx_queue[_efx->n_rx_queues]; \
+ _rx_queue++)
/* Iterate over all RX queues belonging to a channel */
#define efx_for_each_channel_rx_queue(_rx_queue, _channel) \
- for (_rx_queue = &_channel->efx->rx_queue[0]; \
- _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES]; \
- _rx_queue++) \
- if ((!_rx_queue->used) || \
- (_rx_queue->channel != _channel)) \
+ for (_rx_queue = &_channel->efx->rx_queue[_channel->channel]; \
+ _rx_queue; \
+ _rx_queue = NULL) \
+ if (_rx_queue->channel != _channel) \
continue; \
else
}
/* Set bit in a little-endian bitfield */
-static inline void set_bit_le(int nr, unsigned char *addr)
+static inline void set_bit_le(unsigned nr, unsigned char *addr)
{
addr[nr / 8] |= (1 << (nr % 8));
}
/* Clear bit in a little-endian bitfield */
-static inline void clear_bit_le(int nr, unsigned char *addr)
+static inline void clear_bit_le(unsigned nr, unsigned char *addr)
{
addr[nr / 8] &= ~(1 << (nr % 8));
}
* that the net driver will program into the MAC as the maximum frame
* length.
*
- * The 10G MAC used in Falcon requires 8-byte alignment on the frame
+ * The 10G MAC requires 8-byte alignment on the frame
* length, so we round up to the nearest 8.
+ *
+ * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
+ * XGMII cycle). If the frame length reaches the maximum value in the
+ * same cycle, the XMAC can miss the IPG altogether. We work around
+ * this by adding a further 16 bytes.
*/
#define EFX_MAX_FRAME_LEN(mtu) \
- ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7)
+ ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16)
#endif /* EFX_NET_DRIVER_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff