* Derived from ivtv-streams.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ * Copyright (C) 2008 Andy Walls <awalls@radix.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*/
#include "cx18-driver.h"
+#include "cx18-io.h"
#include "cx18-fileops.h"
#include "cx18-mailbox.h"
#include "cx18-i2c.h"
#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
-static struct file_operations cx18_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = cx18_v4l2_read,
- .open = cx18_v4l2_open,
- .ioctl = cx18_v4l2_ioctl,
- .release = cx18_v4l2_close,
- .poll = cx18_v4l2_enc_poll,
+static struct v4l2_file_operations cx18_v4l2_enc_fops = {
+ .owner = THIS_MODULE,
+ .read = cx18_v4l2_read,
+ .open = cx18_v4l2_open,
+ /* FIXME change to video_ioctl2 if serialization lock can be removed */
+ .ioctl = cx18_v4l2_ioctl,
+ .release = cx18_v4l2_close,
+ .poll = cx18_v4l2_enc_poll,
};
/* offset from 0 to register ts v4l2 minors on */
static struct {
const char *name;
int vfl_type;
- int minor_offset;
+ int num_offset;
int dma;
enum v4l2_buf_type buf_type;
- struct file_operations *fops;
} cx18_stream_info[] = {
{ /* CX18_ENC_STREAM_TYPE_MPG */
"encoder MPEG",
VFL_TYPE_GRABBER, 0,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_TS */
"TS",
VFL_TYPE_GRABBER, -1,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_YUV */
"encoder YUV",
VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_VBI */
"encoder VBI",
VFL_TYPE_VBI, 0,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VBI_CAPTURE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_PCM */
"encoder PCM audio",
VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_PRIVATE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_IDX */
"encoder IDX",
VFL_TYPE_GRABBER, -1,
PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE,
- &cx18_v4l2_enc_fops
},
{ /* CX18_ENC_STREAM_TYPE_RAD */
"encoder radio",
VFL_TYPE_RADIO, 0,
PCI_DMA_NONE, V4L2_BUF_TYPE_PRIVATE,
- &cx18_v4l2_enc_fops
},
};
static void cx18_stream_init(struct cx18 *cx, int type)
{
struct cx18_stream *s = &cx->streams[type];
- struct video_device *dev = s->v4l2dev;
- u32 max_size = cx->options.megabytes[type] * 1024 * 1024;
+ struct video_device *video_dev = s->video_dev;
- /* we need to keep v4l2dev, so restore it afterwards */
+ /* we need to keep video_dev, so restore it afterwards */
memset(s, 0, sizeof(*s));
- s->v4l2dev = dev;
+ s->video_dev = video_dev;
/* initialize cx18_stream fields */
s->cx = cx;
s->type = type;
s->name = cx18_stream_info[type].name;
- s->handle = 0xffffffff;
+ s->handle = CX18_INVALID_TASK_HANDLE;
s->dma = cx18_stream_info[type].dma;
+ s->buffers = cx->stream_buffers[type];
s->buf_size = cx->stream_buf_size[type];
- if (s->buf_size)
- s->buffers = max_size / s->buf_size;
- if (s->buffers > 63) {
- /* Each stream has a maximum of 63 buffers,
- ensure we do not exceed that. */
- s->buffers = 63;
- s->buf_size = (max_size / s->buffers) & ~0xfff;
- }
- spin_lock_init(&s->qlock);
+
+ mutex_init(&s->qlock);
init_waitqueue_head(&s->waitq);
s->id = -1;
cx18_queue_init(&s->q_free);
+ cx18_queue_init(&s->q_busy);
cx18_queue_init(&s->q_full);
- cx18_queue_init(&s->q_io);
}
static int cx18_prep_dev(struct cx18 *cx, int type)
{
struct cx18_stream *s = &cx->streams[type];
u32 cap = cx->v4l2_cap;
- int minor_offset = cx18_stream_info[type].minor_offset;
- int minor;
+ int num_offset = cx18_stream_info[type].num_offset;
+ int num = cx->instance + cx18_first_minor + num_offset;
- /* These four fields are always initialized. If v4l2dev == NULL, then
+ /* These four fields are always initialized. If video_dev == NULL, then
this stream is not in use. In that case no other fields but these
four can be used. */
- s->v4l2dev = NULL;
+ s->video_dev = NULL;
s->cx = cx;
s->type = type;
s->name = cx18_stream_info[type].name;
!(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE)))
return 0;
- /* card number + user defined offset + device offset */
- minor = cx->num + cx18_first_minor + minor_offset;
-
/* User explicitly selected 0 buffers for these streams, so don't
create them. */
if (cx18_stream_info[type].dma != PCI_DMA_NONE &&
- cx->options.megabytes[type] == 0) {
+ cx->stream_buffers[type] == 0) {
CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name);
return 0;
}
cx18_stream_init(cx, type);
- if (minor_offset == -1)
+ if (num_offset == -1)
return 0;
/* allocate and initialize the v4l2 video device structure */
- s->v4l2dev = video_device_alloc();
- if (s->v4l2dev == NULL) {
+ s->video_dev = video_device_alloc();
+ if (s->video_dev == NULL) {
CX18_ERR("Couldn't allocate v4l2 video_device for %s\n",
s->name);
return -ENOMEM;
}
- s->v4l2dev->type =
- VID_TYPE_CAPTURE | VID_TYPE_TUNER | VID_TYPE_TELETEXT |
- VID_TYPE_CLIPPING | VID_TYPE_SCALES | VID_TYPE_MPEG_ENCODER;
- snprintf(s->v4l2dev->name, sizeof(s->v4l2dev->name), "cx18%d %s",
- cx->num, s->name);
-
- s->v4l2dev->minor = minor;
- s->v4l2dev->dev = &cx->dev->dev;
- s->v4l2dev->fops = cx18_stream_info[type].fops;
- s->v4l2dev->release = video_device_release;
+ snprintf(s->video_dev->name, sizeof(s->video_dev->name), "%s %s",
+ cx->v4l2_dev.name, s->name);
+ s->video_dev->num = num;
+ s->video_dev->v4l2_dev = &cx->v4l2_dev;
+ s->video_dev->fops = &cx18_v4l2_enc_fops;
+ s->video_dev->release = video_device_release;
+ s->video_dev->tvnorms = V4L2_STD_ALL;
+ cx18_set_funcs(s->video_dev);
return 0;
}
/* Initialize v4l2 variables and register v4l2 devices */
int cx18_streams_setup(struct cx18 *cx)
{
- int type;
+ int type, ret;
/* Setup V4L2 Devices */
for (type = 0; type < CX18_MAX_STREAMS; type++) {
/* Prepare device */
- if (cx18_prep_dev(cx, type))
+ ret = cx18_prep_dev(cx, type);
+ if (ret < 0)
break;
/* Allocate Stream */
- if (cx18_stream_alloc(&cx->streams[type]))
+ ret = cx18_stream_alloc(&cx->streams[type]);
+ if (ret < 0)
break;
}
if (type == CX18_MAX_STREAMS)
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- cx18_streams_cleanup(cx);
- return -ENOMEM;
+ cx18_streams_cleanup(cx, 0);
+ return ret;
}
static int cx18_reg_dev(struct cx18 *cx, int type)
{
struct cx18_stream *s = &cx->streams[type];
int vfl_type = cx18_stream_info[type].vfl_type;
- int minor;
+ int num, ret;
/* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something?
* We need a VFL_TYPE_TS defined.
/* just return if no DVB is supported */
if ((cx->card->hw_all & CX18_HW_DVB) == 0)
return 0;
- if (cx18_dvb_register(s) < 0) {
+ ret = cx18_dvb_register(s);
+ if (ret < 0) {
CX18_ERR("DVB failed to register\n");
- return -EINVAL;
+ return ret;
}
}
- if (s->v4l2dev == NULL)
+ if (s->video_dev == NULL)
return 0;
- minor = s->v4l2dev->minor;
+ num = s->video_dev->num;
+ /* card number + user defined offset + device offset */
+ if (type != CX18_ENC_STREAM_TYPE_MPG) {
+ struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG];
+
+ if (s_mpg->video_dev)
+ num = s_mpg->video_dev->num
+ + cx18_stream_info[type].num_offset;
+ }
+ video_set_drvdata(s->video_dev, s);
/* Register device. First try the desired minor, then any free one. */
- if (video_register_device(s->v4l2dev, vfl_type, minor) &&
- video_register_device(s->v4l2dev, vfl_type, -1)) {
- CX18_ERR("Couldn't register v4l2 device for %s minor %d\n",
- s->name, minor);
- video_device_release(s->v4l2dev);
- s->v4l2dev = NULL;
- return -ENOMEM;
+ ret = video_register_device(s->video_dev, vfl_type, num);
+ if (ret < 0) {
+ CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n",
+ s->name, num);
+ video_device_release(s->video_dev);
+ s->video_dev = NULL;
+ return ret;
}
- minor = s->v4l2dev->minor;
+ num = s->video_dev->num;
switch (vfl_type) {
case VFL_TYPE_GRABBER:
- CX18_INFO("Registered device video%d for %s (%d MB)\n",
- minor, s->name, cx->options.megabytes[type]);
+ CX18_INFO("Registered device video%d for %s (%d x %d kB)\n",
+ num, s->name, cx->stream_buffers[type],
+ cx->stream_buf_size[type]/1024);
break;
case VFL_TYPE_RADIO:
CX18_INFO("Registered device radio%d for %s\n",
- minor - MINOR_VFL_TYPE_RADIO_MIN, s->name);
+ num, s->name);
break;
case VFL_TYPE_VBI:
- if (cx->options.megabytes[type])
- CX18_INFO("Registered device vbi%d for %s (%d MB)\n",
- minor - MINOR_VFL_TYPE_VBI_MIN,
- s->name, cx->options.megabytes[type]);
+ if (cx->stream_buffers[type])
+ CX18_INFO("Registered device vbi%d for %s "
+ "(%d x %d bytes)\n",
+ num, s->name, cx->stream_buffers[type],
+ cx->stream_buf_size[type]);
else
CX18_INFO("Registered device vbi%d for %s\n",
- minor - MINOR_VFL_TYPE_VBI_MIN, s->name);
+ num, s->name);
break;
}
int cx18_streams_register(struct cx18 *cx)
{
int type;
- int err = 0;
+ int err;
+ int ret = 0;
/* Register V4L2 devices */
- for (type = 0; type < CX18_MAX_STREAMS; type++)
- err |= cx18_reg_dev(cx, type);
+ for (type = 0; type < CX18_MAX_STREAMS; type++) {
+ err = cx18_reg_dev(cx, type);
+ if (err && ret == 0)
+ ret = err;
+ }
- if (err == 0)
+ if (ret == 0)
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- cx18_streams_cleanup(cx);
- return -ENOMEM;
+ cx18_streams_cleanup(cx, 1);
+ return ret;
}
/* Unregister v4l2 devices */
-void cx18_streams_cleanup(struct cx18 *cx)
+void cx18_streams_cleanup(struct cx18 *cx, int unregister)
{
struct video_device *vdev;
int type;
/* Teardown all streams */
for (type = 0; type < CX18_MAX_STREAMS; type++) {
- if (cx->streams[type].dvb.enabled)
+ if (cx->streams[type].dvb.enabled) {
cx18_dvb_unregister(&cx->streams[type]);
+ cx->streams[type].dvb.enabled = false;
+ }
- vdev = cx->streams[type].v4l2dev;
+ vdev = cx->streams[type].video_dev;
- cx->streams[type].v4l2dev = NULL;
+ cx->streams[type].video_dev = NULL;
if (vdev == NULL)
continue;
cx18_stream_free(&cx->streams[type]);
- /* Unregister device */
- video_unregister_device(vdev);
+ /* Unregister or release device */
+ if (unregister)
+ video_unregister_device(vdev);
+ else
+ video_device_release(vdev);
}
}
static void cx18_vbi_setup(struct cx18_stream *s)
{
struct cx18 *cx = s->cx;
- int raw = cx->vbi.sliced_in->service_set == 0;
+ int raw = cx18_raw_vbi(cx);
u32 data[CX2341X_MBOX_MAX_DATA];
int lines;
}
/* setup VBI registers */
- cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in);
-
- /* determine number of lines and total number of VBI bytes.
- A raw line takes 1443 bytes: 2 * 720 + 4 byte frame header - 1
- The '- 1' byte is probably an unused U or V byte. Or something...
- A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal
- header, 42 data bytes + checksum (to be confirmed) */
+ v4l2_subdev_call(cx->sd_av, video, s_fmt, &cx->vbi.in);
+
+ /*
+ * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
+ * VBI when the first analog capture channel starts, as once it starts
+ * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup
+ * (i.e. for the VBI capture channels). We also send it for each
+ * analog capture channel anyway just to make sure we get the proper
+ * behavior
+ */
if (raw) {
lines = cx->vbi.count * 2;
} else {
- lines = cx->is_60hz ? 24 : 38;
- if (cx->is_60hz)
- lines += 2;
+ /*
+ * For 525/60 systems, according to the VIP 2 & BT.656 std:
+ * The EAV RP code's Field bit toggles on line 4, a few lines
+ * after the Vertcal Blank bit has already toggled.
+ * Tell the encoder to capture 21-4+1=18 lines per field,
+ * since we want lines 10 through 21.
+ *
+ * FIXME - revisit for 625/50 systems
+ */
+ lines = cx->is_60hz ? (21 - 4 + 1) * 2 : 38;
}
- cx->vbi.enc_size = lines *
- (raw ? cx->vbi.raw_size : cx->vbi.sliced_size);
-
data[0] = s->handle;
/* Lines per field */
data[1] = (lines / 2) | ((lines / 2) << 16);
/* bytes per line */
- data[2] = (raw ? cx->vbi.raw_size : cx->vbi.sliced_size);
+ data[2] = (raw ? vbi_active_samples
+ : (cx->is_60hz ? vbi_hblank_samples_60Hz
+ : vbi_hblank_samples_50Hz));
/* Every X number of frames a VBI interrupt arrives
(frames as in 25 or 30 fps) */
data[3] = 1;
- /* Setup VBI for the cx25840 digitizer */
+ /*
+ * Set the SAV/EAV RP codes to look for as start/stop points
+ * when in VIP-1.1 mode
+ */
if (raw) {
+ /*
+ * Start codes for beginning of "active" line in vertical blank
+ * 0x20 ( VerticalBlank )
+ * 0x60 ( EvenField VerticalBlank )
+ */
data[4] = 0x20602060;
- data[5] = 0x30703070;
+ /*
+ * End codes for end of "active" raw lines and regular lines
+ * 0x30 ( VerticalBlank HorizontalBlank)
+ * 0x70 ( EvenField VerticalBlank HorizontalBlank)
+ * 0x90 (Task HorizontalBlank)
+ * 0xd0 (Task EvenField HorizontalBlank)
+ */
+ data[5] = 0x307090d0;
} else {
+ /*
+ * End codes for active video, we want data in the hblank region
+ * 0xb0 (Task 0 VerticalBlank HorizontalBlank)
+ * 0xf0 (Task EvenField VerticalBlank HorizontalBlank)
+ *
+ * Since the V bit is only allowed to toggle in the EAV RP code,
+ * just before the first active region line, these two
+ * are problematic:
+ * 0x90 (Task HorizontalBlank)
+ * 0xd0 (Task EvenField HorizontalBlank)
+ *
+ * We have set the digitzer to consider the first active line
+ * as part of VerticalBlank as well so we don't have to look for
+ * these problem codes nor lose the last line of sliced data.
+ */
data[4] = 0xB0F0B0F0;
+ /*
+ * Start codes for beginning of active line in vertical blank
+ * 0xa0 (Task VerticalBlank )
+ * 0xe0 (Task EvenField VerticalBlank )
+ */
data[5] = 0xA0E0A0E0;
}
CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n",
data[0], data[1], data[2], data[3], data[4], data[5]);
- if (s->type == CX18_ENC_STREAM_TYPE_VBI)
- cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
+ cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
+}
+
+struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s,
+ struct cx18_buffer *buf)
+{
+ struct cx18 *cx = s->cx;
+ struct cx18_queue *q;
+
+ /* Don't give it to the firmware, if we're not running a capture */
+ if (s->handle == CX18_INVALID_TASK_HANDLE ||
+ !test_bit(CX18_F_S_STREAMING, &s->s_flags))
+ return cx18_enqueue(s, buf, &s->q_free);
+
+ q = cx18_enqueue(s, buf, &s->q_busy);
+ if (q != &s->q_busy)
+ return q; /* The firmware has the max buffers it can handle */
+
+ cx18_buf_sync_for_device(s, buf);
+ cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+ (void __iomem *) &cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ 1, buf->id, s->buf_size);
+ return q;
+}
+
+void cx18_stream_load_fw_queue(struct cx18_stream *s)
+{
+ struct cx18_queue *q;
+ struct cx18_buffer *buf;
+
+ if (atomic_read(&s->q_free.buffers) == 0 ||
+ atomic_read(&s->q_busy.buffers) >= CX18_MAX_FW_MDLS_PER_STREAM)
+ return;
+
+ /* Move from q_free to q_busy notifying the firmware, until the limit */
+ do {
+ buf = cx18_dequeue(s, &s->q_free);
+ if (buf == NULL)
+ break;
+ q = cx18_stream_put_buf_fw(s, buf);
+ } while (atomic_read(&s->q_busy.buffers) < CX18_MAX_FW_MDLS_PER_STREAM
+ && q == &s->q_busy);
}
int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
{
u32 data[MAX_MB_ARGUMENTS];
struct cx18 *cx = s->cx;
- struct list_head *p;
- int ts = 0;
+ struct cx18_buffer *buf;
int captype = 0;
+ struct cx18_api_func_private priv;
- if (s->v4l2dev == NULL && s->dvb.enabled == 0)
+ if (s->video_dev == NULL && s->dvb.enabled == 0)
return -EINVAL;
CX18_DEBUG_INFO("Start encoder stream %s\n", s->name);
case CX18_ENC_STREAM_TYPE_TS:
captype = CAPTURE_CHANNEL_TYPE_TS;
- ts = 1;
break;
case CX18_ENC_STREAM_TYPE_YUV:
captype = CAPTURE_CHANNEL_TYPE_YUV;
captype = CAPTURE_CHANNEL_TYPE_PCM;
break;
case CX18_ENC_STREAM_TYPE_VBI:
- captype = cx->vbi.sliced_in->service_set ?
- CAPTURE_CHANNEL_TYPE_SLICED_VBI : CAPTURE_CHANNEL_TYPE_VBI;
+#ifdef CX18_ENCODER_PARSES_SLICED
+ captype = cx18_raw_vbi(cx) ?
+ CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI;
+#else
+ /*
+ * Currently we set things up so that Sliced VBI from the
+ * digitizer is handled as Raw VBI by the encoder
+ */
+ captype = CAPTURE_CHANNEL_TYPE_VBI;
+#endif
cx->vbi.frame = 0;
cx->vbi.inserted_frame = 0;
memset(cx->vbi.sliced_mpeg_size,
default:
return -EINVAL;
}
- s->buffers_stolen = 0;
-
- /* mute/unmute video */
- cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2,
- s->handle, !!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags));
/* Clear Streamoff flags in case left from last capture */
clear_bit(CX18_F_S_STREAMOFF, &s->s_flags);
s->handle = data[0];
cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
- if (atomic_read(&cx->capturing) == 0 && !ts) {
- /* Stuff from Windows, we don't know what it is */
+ /*
+ * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and
+ * set up all the parameters, as it is not obvious which parameters the
+ * firmware shares across capture channel types and which it does not.
+ *
+ * Some of the cx18_vapi() calls below apply to only certain capture
+ * channel types. We're hoping there's no harm in calling most of them
+ * anyway, as long as the values are all consistent. Setting some
+ * shared parameters will have no effect once an analog capture channel
+ * has started streaming.
+ */
+ if (captype != CAPTURE_CHANNEL_TYPE_TS) {
cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1);
- cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, s->handle, 12);
+ /*
+ * Audio related reset according to
+ * Documentation/video4linux/cx2341x/fw-encoder-api.txt
+ */
+ if (atomic_read(&cx->ana_capturing) == 0)
+ cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
+ s->handle, 12);
+
+ /*
+ * Number of lines for Field 1 & Field 2 according to
+ * Documentation/video4linux/cx2341x/fw-encoder-api.txt
+ * Field 1 is 312 for 625 line systems in BT.656
+ * Field 2 is 313 for 625 line systems in BT.656
+ */
cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3,
- s->handle, cx->digitizer, cx->digitizer);
+ s->handle, 312, 313);
- /* Setup VBI */
if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE)
cx18_vbi_setup(s);
- /* assign program index info.
- Mask 7: select I/P/B, Num_req: 400 max */
+ /*
+ * assign program index info.
+ * Mask 7: select I/P/B, Num_req: 400 max
+ * FIXME - currently we have this hardcoded as disabled
+ */
cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 1, 0);
- /* Setup API for Stream */
- cx2341x_update(cx, cx18_api_func, NULL, &cx->params);
+ /* Call out to the common CX2341x API setup for user controls */
+ priv.cx = cx;
+ priv.s = s;
+ cx2341x_update(&priv, cx18_api_func, NULL, &cx->params);
+
+ /*
+ * When starting a capture and we're set for radio,
+ * ensure the video is muted, despite the user control.
+ */
+ if (!cx->params.video_mute &&
+ test_bit(CX18_F_I_RADIO_USER, &cx->i_flags))
+ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
+ (cx->params.video_mute_yuv << 8) | 1);
}
- if (atomic_read(&cx->capturing) == 0) {
+ if (atomic_read(&cx->tot_capturing) == 0) {
clear_bit(CX18_F_I_EOS, &cx->i_flags);
- write_reg(7, CX18_DSP0_INTERRUPT_MASK);
+ cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK);
}
cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
- (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
- (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
-
- list_for_each(p, &s->q_free.list) {
- struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
-
- writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
- writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
- cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1,
- buf->id, s->buf_size);
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+
+ /* Init all the cpu_mdls for this stream */
+ cx18_flush_queues(s);
+ mutex_lock(&s->qlock);
+ list_for_each_entry(buf, &s->q_free.list, list) {
+ cx18_writel(cx, buf->dma_handle,
+ &cx->scb->cpu_mdl[buf->id].paddr);
+ cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
}
+ mutex_unlock(&s->qlock);
+ cx18_stream_load_fw_queue(s);
+
/* begin_capture */
if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
CX18_DEBUG_WARN("Error starting capture!\n");
+ /* Ensure we're really not capturing before releasing MDLs */
+ if (s->type == CX18_ENC_STREAM_TYPE_MPG)
+ cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1);
+ else
+ cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle);
+ clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+ /* FIXME - CX18_F_S_STREAMOFF as well? */
+ cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
+ s->handle = CX18_INVALID_TASK_HANDLE;
+ if (atomic_read(&cx->tot_capturing) == 0) {
+ set_bit(CX18_F_I_EOS, &cx->i_flags);
+ cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
+ }
return -EINVAL;
}
/* you're live! sit back and await interrupts :) */
- atomic_inc(&cx->capturing);
+ if (captype != CAPTURE_CHANNEL_TYPE_TS)
+ atomic_inc(&cx->ana_capturing);
+ atomic_inc(&cx->tot_capturing);
return 0;
}
for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) {
struct cx18_stream *s = &cx->streams[i];
- if (s->v4l2dev == NULL && s->dvb.enabled == 0)
+ if (s->video_dev == NULL && s->dvb.enabled == 0)
continue;
if (test_bit(CX18_F_S_STREAMING, &s->s_flags))
cx18_stop_v4l2_encode_stream(s, 0);
struct cx18 *cx = s->cx;
unsigned long then;
- if (s->v4l2dev == NULL && s->dvb.enabled == 0)
+ if (s->video_dev == NULL && s->dvb.enabled == 0)
return -EINVAL;
/* This function assumes that you are allowed to stop the capture
CX18_DEBUG_INFO("Stop Capture\n");
- if (atomic_read(&cx->capturing) == 0)
+ if (atomic_read(&cx->tot_capturing) == 0)
return 0;
if (s->type == CX18_ENC_STREAM_TYPE_MPG)
CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
}
- atomic_dec(&cx->capturing);
+ if (s->type != CX18_ENC_STREAM_TYPE_TS)
+ atomic_dec(&cx->ana_capturing);
+ atomic_dec(&cx->tot_capturing);
/* Clear capture and no-read bits */
clear_bit(CX18_F_S_STREAMING, &s->s_flags);
+ /* Tell the CX23418 it can't use our buffers anymore */
+ cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
+
cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
- s->handle = 0xffffffff;
+ s->handle = CX18_INVALID_TASK_HANDLE;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
return 0;
- write_reg(5, CX18_DSP0_INTERRUPT_MASK);
+ cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
wake_up(&s->waitq);
return 0;
for (i = 0; i < CX18_MAX_STREAMS; i++) {
struct cx18_stream *s = &cx->streams[i];
- if (s->v4l2dev && s->handle)
+ if (s->video_dev && (s->handle != CX18_INVALID_TASK_HANDLE))
return s->handle;
}
- return 0;
+ return CX18_INVALID_TASK_HANDLE;
+}
+
+struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle)
+{
+ int i;
+ struct cx18_stream *s;
+
+ if (handle == CX18_INVALID_TASK_HANDLE)
+ return NULL;
+
+ for (i = 0; i < CX18_MAX_STREAMS; i++) {
+ s = &cx->streams[i];
+ if (s->handle != handle)
+ continue;
+ if (s->video_dev || s->dvb.enabled)
+ return s;
+ }
+ return NULL;
}