V4L/DVB (10757): cx18, v4l2-chip-ident: Finish conversion of AV decoder core to v4l2_...
authorAndy Walls <awalls@radix.net>
Mon, 16 Feb 2009 05:23:25 +0000 (02:23 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 30 Mar 2009 15:43:01 +0000 (12:43 -0300)
Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast
decoder core internal to the CX23418.  Completed separation and encapsulation
of the A/V decoder core interface as a v4l2_subdevice.  The cx18 driver now
compiles and links again.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
12 files changed:
drivers/media/video/cx18/cx18-av-core.c
drivers/media/video/cx18/cx18-av-core.h
drivers/media/video/cx18/cx18-controls.c
drivers/media/video/cx18/cx18-driver.c
drivers/media/video/cx18/cx18-driver.h
drivers/media/video/cx18/cx18-firmware.c
drivers/media/video/cx18/cx18-i2c.c
drivers/media/video/cx18/cx18-ioctl.c
drivers/media/video/cx18/cx18-streams.c
drivers/media/video/cx18/cx18-vbi.c
drivers/media/video/cx18/cx18-video.c
include/media/v4l2-chip-ident.h

index 9b30f77..f9bb77a 100644 (file)
@@ -201,15 +201,45 @@ static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
        return 0;
 }
 
-static int cx18_av_init_hardware(struct v4l2_subdev *sd, u32 val)
+static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
 {
        struct cx18_av_state *state = to_cx18_av_state(sd);
        struct cx18 *cx = v4l2_get_subdevdata(sd);
 
-       if (!state->is_initialized) {
-               /* initialize on first use */
-               state->is_initialized = 1;
-               cx18_av_initialize(cx);
+       switch (val) {
+       case CX18_AV_INIT_PLLS:
+               /*
+                * The crystal freq used in calculations in this driver will be
+                * 28.636360 MHz.
+                * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
+                */
+
+               /*
+                * VDCLK  Integer = 0x0f, Post Divider = 0x04
+                * AIMCLK Integer = 0x0e, Post Divider = 0x16
+                */
+               cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
+
+               /* VDCLK Fraction = 0x2be2fe */
+               /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
+               cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
+
+               /* AIMCLK Fraction = 0x05227ad */
+               /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
+               cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
+
+               /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+               cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
+               break;
+
+       case CX18_AV_INIT_NORMAL:
+       default:
+               if (!state->is_initialized) {
+                       /* initialize on first use */
+                       state->is_initialized = 1;
+                       cx18_av_initialize(cx);
+               }
+               break;
        }
        return 0;
 }
@@ -1095,14 +1125,11 @@ static inline int cx18_av_dbg_match(const struct v4l2_dbg_match *match)
 static int cx18_av_g_chip_ident(struct v4l2_subdev *sd,
                                struct v4l2_dbg_chip_ident *chip)
 {
+       struct cx18_av_state *state = to_cx18_av_state(sd);
+
        if (cx18_av_dbg_match(&chip->match)) {
-               /*
-                * Nothing else is going to claim to be this combination,
-                * and the real host chip revision will be returned by a host
-                * match on address 0.
-                */
-               chip->ident = V4L2_IDENT_CX25843;
-               chip->revision = V4L2_IDENT_CX23418; /* Why not */
+               chip->ident = state->id;
+               chip->revision = state->rev;
        }
        return 0;
 }
@@ -1143,7 +1170,7 @@ static int cx18_av_s_register(struct v4l2_subdev *sd,
 static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
        .g_chip_ident = cx18_av_g_chip_ident,
        .log_status = cx18_av_log_status,
-       .init = cx18_av_init_hardware,
+       .init = cx18_av_init,
        .reset = cx18_av_reset,
        .queryctrl = cx18_av_queryctrl,
        .g_ctrl = cx18_av_g_ctrl,
@@ -1182,19 +1209,31 @@ static const struct v4l2_subdev_ops cx18_av_ops = {
        .video = &cx18_av_video_ops,
 };
 
-int cx18_av_init(struct cx18 *cx)
+int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd)
 {
-       struct v4l2_subdev *sd = &cx->av_state.sd;
-
-       v4l2_subdev_init(sd, &cx18_av_ops);
-       v4l2_set_subdevdata(sd, cx);
-       snprintf(sd->name, sizeof(sd->name),
-                "%s-internal A/V decoder", cx->v4l2_dev.name);
-       sd->grp_id = CX18_HW_CX23418;
-       return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+       struct cx18_av_state *state = &cx->av_state;
+
+       state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
+       state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO)
+                   ? V4L2_IDENT_CX23418_843 : V4L2_IDENT_UNKNOWN;
+
+       state->vid_input = CX18_AV_COMPOSITE7;
+       state->aud_input = CX18_AV_AUDIO8;
+       state->audclk_freq = 48000;
+       state->audmode = V4L2_TUNER_MODE_LANG1;
+       state->slicer_line_delay = 0;
+       state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
+
+       *sd = &state->sd;
+       v4l2_subdev_init(*sd, &cx18_av_ops);
+       v4l2_set_subdevdata(*sd, cx);
+       snprintf((*sd)->name, sizeof((*sd)->name),
+                "%s internal A/V decoder", cx->v4l2_dev.name);
+       (*sd)->grp_id = CX18_HW_CX23418;
+       return v4l2_device_register_subdev(&cx->v4l2_dev, *sd);
 }
 
-void cx18_av_fini(struct cx18 *cx)
+void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd)
 {
        v4l2_device_unregister_subdev(&cx->av_state.sd);
 }
index 025100a..90bdca9 100644 (file)
@@ -323,6 +323,11 @@ static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd)
        return container_of(sd, struct cx18_av_state, sd);
 }
 
+enum cx18_av_subdev_init_arg {
+       CX18_AV_INIT_NORMAL = 0,
+       CX18_AV_INIT_PLLS = 1,
+};
+
 /* ----------------------------------------------------------------------- */
 /* cx18_av-core.c                                                         */
 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
@@ -337,9 +342,8 @@ int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
 void cx18_av_std_setup(struct cx18 *cx);
 
-int cx18_av_cmd(struct cx18 *cx, int cmd, void *arg); /* FIXME - Remove */
-int cx18_av_init(struct cx18 *cx);
-void cx18_av_fini(struct cx18 *cx);
+int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd);
+void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd);
 
 /* ----------------------------------------------------------------------- */
 /* cx18_av-firmware.c                                                      */
index 10a4e07..9505c41 100644 (file)
@@ -67,7 +67,7 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
        case V4L2_CID_HUE:
        case V4L2_CID_SATURATION:
        case V4L2_CID_CONTRAST:
-               if (cx18_av_cmd(cx, VIDIOC_QUERYCTRL, qctrl))
+               if (v4l2_subdev_call(cx->sd_av, core, queryctrl, qctrl))
                        qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
                return 0;
 
@@ -126,7 +126,7 @@ static int cx18_s_ctrl(struct cx18 *cx, struct v4l2_control *vctrl)
        case V4L2_CID_HUE:
        case V4L2_CID_SATURATION:
        case V4L2_CID_CONTRAST:
-               return cx18_av_cmd(cx, VIDIOC_S_CTRL, vctrl);
+               return v4l2_subdev_call(cx->sd_av, core, s_ctrl, vctrl);
 
        case V4L2_CID_AUDIO_VOLUME:
        case V4L2_CID_AUDIO_MUTE:
@@ -151,7 +151,7 @@ static int cx18_g_ctrl(struct cx18 *cx, struct v4l2_control *vctrl)
        case V4L2_CID_HUE:
        case V4L2_CID_SATURATION:
        case V4L2_CID_CONTRAST:
-               return cx18_av_cmd(cx, VIDIOC_G_CTRL, vctrl);
+               return v4l2_subdev_call(cx->sd_av, core, g_ctrl, vctrl);
 
        case V4L2_CID_AUDIO_VOLUME:
        case V4L2_CID_AUDIO_MUTE:
@@ -278,7 +278,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
                        fmt.fmt.pix.width = cx->params.width
                                                / (is_mpeg1 ? 2 : 1);
                        fmt.fmt.pix.height = cx->params.height;
-                       cx18_av_cmd(cx, VIDIOC_S_FMT, &fmt);
+                       v4l2_subdev_call(cx->sd_av, video, s_fmt, &fmt);
                }
                priv.cx = cx;
                priv.s = &cx->streams[id->type];
index f69e688..f5a41dd 100644 (file)
@@ -621,13 +621,6 @@ static void __devinit cx18_init_struct2(struct cx18 *cx)
                i = 0;
        cx->active_input = i;
        cx->audio_input = cx->card->video_inputs[i].audio_index;
-       cx->av_state.vid_input = CX18_AV_COMPOSITE7;
-       cx->av_state.aud_input = CX18_AV_AUDIO8;
-       cx->av_state.audclk_freq = 48000;
-       cx->av_state.audmode = V4L2_TUNER_MODE_LANG1;
-       cx->av_state.slicer_line_delay = 0;
-       cx->av_state.slicer_line_offset =
-               (10 + cx->av_state.slicer_line_delay - 2);
 }
 
 static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
@@ -812,6 +805,14 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
 
        cx18_gpio_init(cx);
 
+       retval = cx18_av_probe(cx, &cx->sd_av);
+       if (retval) {
+               CX18_ERR("Could not register A/V decoder subdevice\n");
+               goto free_map;
+       }
+       /* Initialize the A/V decoder PLLs to sane defaults */
+       v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_PLLS);
+
        /* active i2c  */
        CX18_DEBUG_INFO("activating i2c...\n");
        retval = init_cx18_i2c(cx);
@@ -1020,6 +1021,9 @@ int cx18_init_on_first_open(struct cx18 *cx)
        cx18_vapi(cx, CX18_APU_RESETAI, 0);
        cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
 
+       /* Init the A/V decoder, if it hasn't been already */
+       v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_NORMAL);
+
        vf.tuner = 0;
        vf.type = V4L2_TUNER_ANALOG_TV;
        vf.frequency = 6400; /* the tuner 'baseline' frequency */
index def82bd..4b50878 100644 (file)
@@ -448,6 +448,7 @@ struct cx18 {
        int instance;
        struct pci_dev *pci_dev;
        struct v4l2_device v4l2_dev;
+       struct v4l2_subdev *sd_av;
 
        const struct cx18_card *card;   /* card information */
        const char *card_name;  /* full name of the card */
index aa89bee..83cd559 100644 (file)
@@ -26,7 +26,6 @@
 #include "cx18-irq.h"
 #include "cx18-firmware.h"
 #include "cx18-cards.h"
-#include "cx18-av-core.h"
 #include <linux/firmware.h>
 
 #define CX18_PROC_SOFT_RESET           0xc70010
@@ -286,23 +285,6 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
        cx18_write_reg(cx, 0x2BE2FE, CX18_MPEG_CLOCK_PLL_FRAC);
        cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST);
 
-       /*
-        * VDCLK  Integer = 0x0f, Post Divider = 0x04
-        * AIMCLK Integer = 0x0e, Post Divider = 0x16
-        */
-       cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
-
-       /* VDCLK Fraction = 0x2be2fe */
-       /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
-       cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
-
-       /* AIMCLK Fraction = 0x05227ad */
-       /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz before post-divide */
-       cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
-
-       /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
-       cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
-
        /* Defaults */
        /* APU = SC or SC/2 = 125/62.5 */
        /* EPU = SC = 125 */
index db2c3e6..db7b552 100644 (file)
@@ -304,7 +304,7 @@ int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg)
                return cx18_gpio(cx, cmd, arg);
 
        if (hw == CX18_HW_CX23418)
-               return cx18_av_cmd(cx, cmd, arg);
+               return v4l2_subdev_command(cx->sd_av, cmd, arg);
 
        addr = cx18_i2c_hw_addr(cx, hw);
        if (addr < 0) {
@@ -322,7 +322,7 @@ void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg)
                CX18_ERR("adapter is not set\n");
                return;
        }
-       cx18_av_cmd(cx, cmd, arg);
+       v4l2_subdev_command(cx->sd_av, cmd, arg);
        i2c_clients_command(&cx->i2c_adap[0], cmd, arg);
        i2c_clients_command(&cx->i2c_adap[1], cmd, arg);
        if (cx->hw_flags & CX18_HW_GPIO)
index 3277b3d..0ddf4dd 100644 (file)
@@ -208,7 +208,7 @@ static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh,
         * digitizer/slicer.  Note, cx18_av_vbi() wipes the passed in
         * fmt->fmt.sliced under valid calling conditions
         */
-       if (cx18_av_cmd(cx, VIDIOC_G_FMT, fmt))
+       if (v4l2_subdev_call(cx->sd_av, video, g_fmt, fmt))
                return -EINVAL;
 
        /* Ensure V4L2 spec compliant output */
@@ -295,7 +295,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh,
 
        cx->params.width = w;
        cx->params.height = h;
-       cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
+       v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
        return cx18_g_fmt_vid_cap(file, fh, fmt);
 }
 
@@ -322,7 +322,7 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
         * Note cx18_av_vbi_wipes out alot of the passed in fmt under valid
         * calling conditions
         */
-       ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
+       ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
        if (ret)
                return ret;
 
@@ -359,7 +359,7 @@ static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh,
         * Note, cx18_av_vbi() wipes some "impossible" service lines in the
         * passed in fmt->fmt.sliced under valid calling conditions
         */
-       ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
+       ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
        if (ret)
                return ret;
        /* Store our current v4l2 sliced VBI settings */
@@ -516,7 +516,8 @@ static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 
        if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
                return -EINVAL;
-       return cx18_av_cmd(cx, VIDIOC_S_CROP, crop);
+       CX18_DEBUG_WARN("VIDIOC_S_CROP not implemented\n");
+       return -EINVAL;
 }
 
 static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop)
@@ -525,7 +526,8 @@ static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 
        if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
                return -EINVAL;
-       return cx18_av_cmd(cx, VIDIOC_G_CROP, crop);
+       CX18_DEBUG_WARN("VIDIOC_G_CROP not implemented\n");
+       return -EINVAL;
 }
 
 static int cx18_enum_fmt_vid_cap(struct file *file, void *fh,
index eff4a14..1d17884 100644 (file)
@@ -348,7 +348,7 @@ static void cx18_vbi_setup(struct cx18_stream *s)
        }
 
        /* setup VBI registers */
-       cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in);
+       v4l2_subdev_call(cx->sd_av, video, s_fmt, &cx->vbi.in);
 
        /*
         * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
index 8e6f4d4..91c21dc 100644 (file)
@@ -154,7 +154,7 @@ static u32 compress_sliced_buf(struct cx18 *cx, u32 line, u8 *buf,
                if (p[0] != 0xff || p[1] || p[2] || p[3] != eav)
                        continue;
                vbi.p = p + 4;
-               cx18_av_cmd(cx, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
+               v4l2_subdev_call(cx->sd_av, video, decode_vbi_line, &vbi);
                if (vbi.type) {
                        cx->vbi.sliced_data[line].id = vbi.type;
                        cx->vbi.sliced_data[line].field = vbi.is_second_field;
index 2e5c419..fabacb0 100644 (file)
@@ -32,7 +32,7 @@ void cx18_video_set_io(struct cx18 *cx)
 
        route.input = cx->card->video_inputs[inp].video_input;
        route.output = 0;
-       cx18_av_cmd(cx, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+       v4l2_subdev_call(cx->sd_av, video, s_routing, &route);
 
        type = cx->card->video_inputs[inp].video_type;
 
index a5339d8..70117e7 100644 (file)
@@ -64,7 +64,8 @@ enum {
        /* module saa7146: reserved range 300-309 */
        V4L2_IDENT_SAA7146 = 300,
 
-       /* Conexant MPEG encoder/decoders: reserved range 410-420 */
+       /* Conexant MPEG encoder/decoders: reserved range 400-420 */
+       V4L2_IDENT_CX23418_843 = 403, /* Integrated A/V Decoder on the '418 */
        V4L2_IDENT_CX23415 = 415,
        V4L2_IDENT_CX23416 = 416,
        V4L2_IDENT_CX23418 = 418,