SAFE public projects git trees. - safe/jmp/linux-2.6/blob - sound/soc/codecs/wm8993.c

   1 /*
   2  * wm8993.c -- WM8993 ALSA SoC audio driver
   3  *
   4  * Copyright 2009, 2010 Wolfson Microelectronics plc
   5  *
   6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/moduleparam.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/pm.h>
  18 #include <linux/i2c.h>
  19 #include <linux/regulator/consumer.h>
  20 #include <linux/spi/spi.h>
  21 #include <linux/slab.h>
  22 #include <sound/core.h>
  23 #include <sound/pcm.h>
  24 #include <sound/pcm_params.h>
  25 #include <sound/tlv.h>
  26 #include <sound/soc.h>
  27 #include <sound/soc-dapm.h>
  28 #include <sound/initval.h>
  29 #include <sound/wm8993.h>
  30
  31 #include "wm8993.h"
  32 #include "wm_hubs.h"
  33
  34 #define WM8993_NUM_SUPPLIES 6
  35 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
  36         "DCVDD",
  37         "DBVDD",
  38         "AVDD1",
  39         "AVDD2",
  40         "CPVDD",
  41         "SPKVDD",
  42 };
  43
  44 static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
  45         0x8993,     /* R0   - Software Reset */
  46         0x0000,     /* R1   - Power Management (1) */
  47         0x6000,     /* R2   - Power Management (2) */
  48         0x0000,     /* R3   - Power Management (3) */
  49         0x4050,     /* R4   - Audio Interface (1) */
  50         0x4000,     /* R5   - Audio Interface (2) */
  51         0x01C8,     /* R6   - Clocking 1 */
  52         0x0000,     /* R7   - Clocking 2 */
  53         0x0000,     /* R8   - Audio Interface (3) */
  54         0x0040,     /* R9   - Audio Interface (4) */
  55         0x0004,     /* R10  - DAC CTRL */
  56         0x00C0,     /* R11  - Left DAC Digital Volume */
  57         0x00C0,     /* R12  - Right DAC Digital Volume */
  58         0x0000,     /* R13  - Digital Side Tone */
  59         0x0300,     /* R14  - ADC CTRL */
  60         0x00C0,     /* R15  - Left ADC Digital Volume */
  61         0x00C0,     /* R16  - Right ADC Digital Volume */
  62         0x0000,     /* R17 */
  63         0x0000,     /* R18  - GPIO CTRL 1 */
  64         0x0010,     /* R19  - GPIO1 */
  65         0x0000,     /* R20  - IRQ_DEBOUNCE */
  66         0x0000,     /* R21 */
  67         0x8000,     /* R22  - GPIOCTRL 2 */
  68         0x0800,     /* R23  - GPIO_POL */
  69         0x008B,     /* R24  - Left Line Input 1&2 Volume */
  70         0x008B,     /* R25  - Left Line Input 3&4 Volume */
  71         0x008B,     /* R26  - Right Line Input 1&2 Volume */
  72         0x008B,     /* R27  - Right Line Input 3&4 Volume */
  73         0x006D,     /* R28  - Left Output Volume */
  74         0x006D,     /* R29  - Right Output Volume */
  75         0x0066,     /* R30  - Line Outputs Volume */
  76         0x0020,     /* R31  - HPOUT2 Volume */
  77         0x0079,     /* R32  - Left OPGA Volume */
  78         0x0079,     /* R33  - Right OPGA Volume */
  79         0x0003,     /* R34  - SPKMIXL Attenuation */
  80         0x0003,     /* R35  - SPKMIXR Attenuation */
  81         0x0011,     /* R36  - SPKOUT Mixers */
  82         0x0100,     /* R37  - SPKOUT Boost */
  83         0x0079,     /* R38  - Speaker Volume Left */
  84         0x0079,     /* R39  - Speaker Volume Right */
  85         0x0000,     /* R40  - Input Mixer2 */
  86         0x0000,     /* R41  - Input Mixer3 */
  87         0x0000,     /* R42  - Input Mixer4 */
  88         0x0000,     /* R43  - Input Mixer5 */
  89         0x0000,     /* R44  - Input Mixer6 */
  90         0x0000,     /* R45  - Output Mixer1 */
  91         0x0000,     /* R46  - Output Mixer2 */
  92         0x0000,     /* R47  - Output Mixer3 */
  93         0x0000,     /* R48  - Output Mixer4 */
  94         0x0000,     /* R49  - Output Mixer5 */
  95         0x0000,     /* R50  - Output Mixer6 */
  96         0x0000,     /* R51  - HPOUT2 Mixer */
  97         0x0000,     /* R52  - Line Mixer1 */
  98         0x0000,     /* R53  - Line Mixer2 */
  99         0x0000,     /* R54  - Speaker Mixer */
 100         0x0000,     /* R55  - Additional Control */
 101         0x0000,     /* R56  - AntiPOP1 */
 102         0x0000,     /* R57  - AntiPOP2 */
 103         0x0000,     /* R58  - MICBIAS */
 104         0x0000,     /* R59 */
 105         0x0000,     /* R60  - FLL Control 1 */
 106         0x0000,     /* R61  - FLL Control 2 */
 107         0x0000,     /* R62  - FLL Control 3 */
 108         0x2EE0,     /* R63  - FLL Control 4 */
 109         0x0002,     /* R64  - FLL Control 5 */
 110         0x2287,     /* R65  - Clocking 3 */
 111         0x025F,     /* R66  - Clocking 4 */
 112         0x0000,     /* R67  - MW Slave Control */
 113         0x0000,     /* R68 */
 114         0x0002,     /* R69  - Bus Control 1 */
 115         0x0000,     /* R70  - Write Sequencer 0 */
 116         0x0000,     /* R71  - Write Sequencer 1 */
 117         0x0000,     /* R72  - Write Sequencer 2 */
 118         0x0000,     /* R73  - Write Sequencer 3 */
 119         0x0000,     /* R74  - Write Sequencer 4 */
 120         0x0000,     /* R75  - Write Sequencer 5 */
 121         0x1F25,     /* R76  - Charge Pump 1 */
 122         0x0000,     /* R77 */
 123         0x0000,     /* R78 */
 124         0x0000,     /* R79 */
 125         0x0000,     /* R80 */
 126         0x0000,     /* R81  - Class W 0 */
 127         0x0000,     /* R82 */
 128         0x0000,     /* R83 */
 129         0x0000,     /* R84  - DC Servo 0 */
 130         0x054A,     /* R85  - DC Servo 1 */
 131         0x0000,     /* R86 */
 132         0x0000,     /* R87  - DC Servo 3 */
 133         0x0000,     /* R88  - DC Servo Readback 0 */
 134         0x0000,     /* R89  - DC Servo Readback 1 */
 135         0x0000,     /* R90  - DC Servo Readback 2 */
 136         0x0000,     /* R91 */
 137         0x0000,     /* R92 */
 138         0x0000,     /* R93 */
 139         0x0000,     /* R94 */
 140         0x0000,     /* R95 */
 141         0x0100,     /* R96  - Analogue HP 0 */
 142         0x0000,     /* R97 */
 143         0x0000,     /* R98  - EQ1 */
 144         0x000C,     /* R99  - EQ2 */
 145         0x000C,     /* R100 - EQ3 */
 146         0x000C,     /* R101 - EQ4 */
 147         0x000C,     /* R102 - EQ5 */
 148         0x000C,     /* R103 - EQ6 */
 149         0x0FCA,     /* R104 - EQ7 */
 150         0x0400,     /* R105 - EQ8 */
 151         0x00D8,     /* R106 - EQ9 */
 152         0x1EB5,     /* R107 - EQ10 */
 153         0xF145,     /* R108 - EQ11 */
 154         0x0B75,     /* R109 - EQ12 */
 155         0x01C5,     /* R110 - EQ13 */
 156         0x1C58,     /* R111 - EQ14 */
 157         0xF373,     /* R112 - EQ15 */
 158         0x0A54,     /* R113 - EQ16 */
 159         0x0558,     /* R114 - EQ17 */
 160         0x168E,     /* R115 - EQ18 */
 161         0xF829,     /* R116 - EQ19 */
 162         0x07AD,     /* R117 - EQ20 */
 163         0x1103,     /* R118 - EQ21 */
 164         0x0564,     /* R119 - EQ22 */
 165         0x0559,     /* R120 - EQ23 */
 166         0x4000,     /* R121 - EQ24 */
 167         0x0000,     /* R122 - Digital Pulls */
 168         0x0F08,     /* R123 - DRC Control 1 */
 169         0x0000,     /* R124 - DRC Control 2 */
 170         0x0080,     /* R125 - DRC Control 3 */
 171         0x0000,     /* R126 - DRC Control 4 */
 172 };
 173
 174 static struct {
 175         int ratio;
 176         int clk_sys_rate;
 177 } clk_sys_rates[] = {
 178         { 64,   0 },
 179         { 128,  1 },
 180         { 192,  2 },
 181         { 256,  3 },
 182         { 384,  4 },
 183         { 512,  5 },
 184         { 768,  6 },
 185         { 1024, 7 },
 186         { 1408, 8 },
 187         { 1536, 9 },
 188 };
 189
 190 static struct {
 191         int rate;
 192         int sample_rate;
 193 } sample_rates[] = {
 194         { 8000,  0  },
 195         { 11025, 1  },
 196         { 12000, 1  },
 197         { 16000, 2  },
 198         { 22050, 3  },
 199         { 24000, 3  },
 200         { 32000, 4  },
 201         { 44100, 5  },
 202         { 48000, 5  },
 203 };
 204
 205 static struct {
 206         int div; /* *10 due to .5s */
 207         int bclk_div;
 208 } bclk_divs[] = {
 209         { 10,  0  },
 210         { 15,  1  },
 211         { 20,  2  },
 212         { 30,  3  },
 213         { 40,  4  },
 214         { 55,  5  },
 215         { 60,  6  },
 216         { 80,  7  },
 217         { 110, 8  },
 218         { 120, 9  },
 219         { 160, 10 },
 220         { 220, 11 },
 221         { 240, 12 },
 222         { 320, 13 },
 223         { 440, 14 },
 224         { 480, 15 },
 225 };
 226
 227 struct wm8993_priv {
 228         struct wm_hubs_data hubs_data;
 229         u16 reg_cache[WM8993_REGISTER_COUNT];
 230         struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 231         struct wm8993_platform_data pdata;
 232         struct snd_soc_codec codec;
 233         int master;
 234         int sysclk_source;
 235         int tdm_slots;
 236         int tdm_width;
 237         unsigned int mclk_rate;
 238         unsigned int sysclk_rate;
 239         unsigned int fs;
 240         unsigned int bclk;
 241         int class_w_users;
 242         unsigned int fll_fref;
 243         unsigned int fll_fout;
 244         int fll_src;
 245 };
 246
 247 static int wm8993_volatile(unsigned int reg)
 248 {
 249         switch (reg) {
 250         case WM8993_SOFTWARE_RESET:
 251         case WM8993_DC_SERVO_0:
 252         case WM8993_DC_SERVO_READBACK_0:
 253         case WM8993_DC_SERVO_READBACK_1:
 254         case WM8993_DC_SERVO_READBACK_2:
 255                 return 1;
 256         default:
 257                 return 0;
 258         }
 259 }
 260
 261 struct _fll_div {
 262         u16 fll_fratio;
 263         u16 fll_outdiv;
 264         u16 fll_clk_ref_div;
 265         u16 n;
 266         u16 k;
 267 };
 268
 269 /* The size in bits of the FLL divide multiplied by 10
 270  * to allow rounding later */
 271 #define FIXED_FLL_SIZE ((1 << 16) * 10)
 272
 273 static struct {
 274         unsigned int min;
 275         unsigned int max;
 276         u16 fll_fratio;
 277         int ratio;
 278 } fll_fratios[] = {
 279         {       0,    64000, 4, 16 },
 280         {   64000,   128000, 3,  8 },
 281         {  128000,   256000, 2,  4 },
 282         {  256000,  1000000, 1,  2 },
 283         { 1000000, 13500000, 0,  1 },
 284 };
 285
 286 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 287                        unsigned int Fout)
 288 {
 289         u64 Kpart;
 290         unsigned int K, Ndiv, Nmod, target;
 291         unsigned int div;
 292         int i;
 293
 294         /* Fref must be <=13.5MHz */
 295         div = 1;
 296         fll_div->fll_clk_ref_div = 0;
 297         while ((Fref / div) > 13500000) {
 298                 div *= 2;
 299                 fll_div->fll_clk_ref_div++;
 300
 301                 if (div > 8) {
 302                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 303                                Fref);
 304                         return -EINVAL;
 305                 }
 306         }
 307
 308         pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 309
 310         /* Apply the division for our remaining calculations */
 311         Fref /= div;
 312
 313         /* Fvco should be 90-100MHz; don't check the upper bound */
 314         div = 0;
 315         target = Fout * 2;
 316         while (target < 90000000) {
 317                 div++;
 318                 target *= 2;
 319                 if (div > 7) {
 320                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 321                                Fout);
 322                         return -EINVAL;
 323                 }
 324         }
 325         fll_div->fll_outdiv = div;
 326
 327         pr_debug("Fvco=%dHz\n", target);
 328
 329         /* Find an appropraite FLL_FRATIO and factor it out of the target */
 330         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 331                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 332                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 333                         target /= fll_fratios[i].ratio;
 334                         break;
 335                 }
 336         }
 337         if (i == ARRAY_SIZE(fll_fratios)) {
 338                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 339                 return -EINVAL;
 340         }
 341
 342         /* Now, calculate N.K */
 343         Ndiv = target / Fref;
 344
 345         fll_div->n = Ndiv;
 346         Nmod = target % Fref;
 347         pr_debug("Nmod=%d\n", Nmod);
 348
 349         /* Calculate fractional part - scale up so we can round. */
 350         Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 351
 352         do_div(Kpart, Fref);
 353
 354         K = Kpart & 0xFFFFFFFF;
 355
 356         if ((K % 10) >= 5)
 357                 K += 5;
 358
 359         /* Move down to proper range now rounding is done */
 360         fll_div->k = K / 10;
 361
 362         pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 363                  fll_div->n, fll_div->k,
 364                  fll_div->fll_fratio, fll_div->fll_outdiv,
 365                  fll_div->fll_clk_ref_div);
 366
 367         return 0;
 368 }
 369
 370 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 371                           unsigned int Fref, unsigned int Fout)
 372 {
 373         struct snd_soc_codec *codec = dai->codec;
 374         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 375         u16 reg1, reg4, reg5;
 376         struct _fll_div fll_div;
 377         int ret;
 378
 379         /* Any change? */
 380         if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
 381                 return 0;
 382
 383         /* Disable the FLL */
 384         if (Fout == 0) {
 385                 dev_dbg(codec->dev, "FLL disabled\n");
 386                 wm8993->fll_fref = 0;
 387                 wm8993->fll_fout = 0;
 388
 389                 reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 390                 reg1 &= ~WM8993_FLL_ENA;
 391                 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 392
 393                 return 0;
 394         }
 395
 396         ret = fll_factors(&fll_div, Fref, Fout);
 397         if (ret != 0)
 398                 return ret;
 399
 400         reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
 401         reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
 402
 403         switch (fll_id) {
 404         case WM8993_FLL_MCLK:
 405                 break;
 406
 407         case WM8993_FLL_LRCLK:
 408                 reg5 |= 1;
 409                 break;
 410
 411         case WM8993_FLL_BCLK:
 412                 reg5 |= 2;
 413                 break;
 414
 415         default:
 416                 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
 417                 return -EINVAL;
 418         }
 419
 420         /* Any FLL configuration change requires that the FLL be
 421          * disabled first. */
 422         reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 423         reg1 &= ~WM8993_FLL_ENA;
 424         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 425
 426         /* Apply the configuration */
 427         if (fll_div.k)
 428                 reg1 |= WM8993_FLL_FRAC_MASK;
 429         else
 430                 reg1 &= ~WM8993_FLL_FRAC_MASK;
 431         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 432
 433         snd_soc_write(codec, WM8993_FLL_CONTROL_2,
 434                       (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
 435                       (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
 436         snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
 437
 438         reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
 439         reg4 &= ~WM8993_FLL_N_MASK;
 440         reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
 441         snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
 442
 443         reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
 444         reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 445         snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
 446
 447         /* Enable the FLL */
 448         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 449
 450         dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 451
 452         wm8993->fll_fref = Fref;
 453         wm8993->fll_fout = Fout;
 454         wm8993->fll_src = source;
 455
 456         return 0;
 457 }
 458
 459 static int configure_clock(struct snd_soc_codec *codec)
 460 {
 461         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 462         unsigned int reg;
 463
 464         /* This should be done on init() for bypass paths */
 465         switch (wm8993->sysclk_source) {
 466         case WM8993_SYSCLK_MCLK:
 467                 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
 468
 469                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 470                 reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
 471                 if (wm8993->mclk_rate > 13500000) {
 472                         reg |= WM8993_MCLK_DIV;
 473                         wm8993->sysclk_rate = wm8993->mclk_rate / 2;
 474                 } else {
 475                         reg &= ~WM8993_MCLK_DIV;
 476                         wm8993->sysclk_rate = wm8993->mclk_rate;
 477                 }
 478                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 479                 break;
 480
 481         case WM8993_SYSCLK_FLL:
 482                 dev_dbg(codec->dev, "Using %dHz FLL clock\n",
 483                         wm8993->fll_fout);
 484
 485                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 486                 reg |= WM8993_SYSCLK_SRC;
 487                 if (wm8993->fll_fout > 13500000) {
 488                         reg |= WM8993_MCLK_DIV;
 489                         wm8993->sysclk_rate = wm8993->fll_fout / 2;
 490                 } else {
 491                         reg &= ~WM8993_MCLK_DIV;
 492                         wm8993->sysclk_rate = wm8993->fll_fout;
 493                 }
 494                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 495                 break;
 496
 497         default:
 498                 dev_err(codec->dev, "System clock not configured\n");
 499                 return -EINVAL;
 500         }
 501
 502         dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
 503
 504         return 0;
 505 }
 506
 507 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
 508 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
 509 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 510 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 511 static const unsigned int drc_max_tlv[] = {
 512         TLV_DB_RANGE_HEAD(4),
 513         0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 514         3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
 515 };
 516 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 517 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
 518 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 519 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 520 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
 521
 522 static const char *dac_deemph_text[] = {
 523         "None",
 524         "32kHz",
 525         "44.1kHz",
 526         "48kHz",
 527 };
 528
 529 static const struct soc_enum dac_deemph =
 530         SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
 531
 532 static const char *adc_hpf_text[] = {
 533         "Hi-Fi",
 534         "Voice 1",
 535         "Voice 2",
 536         "Voice 3",
 537 };
 538
 539 static const struct soc_enum adc_hpf =
 540         SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
 541
 542 static const char *drc_path_text[] = {
 543         "ADC",
 544         "DAC"
 545 };
 546
 547 static const struct soc_enum drc_path =
 548         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
 549
 550 static const char *drc_r0_text[] = {
 551         "1",
 552         "1/2",
 553         "1/4",
 554         "1/8",
 555         "1/16",
 556         "0",
 557 };
 558
 559 static const struct soc_enum drc_r0 =
 560         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
 561
 562 static const char *drc_r1_text[] = {
 563         "1",
 564         "1/2",
 565         "1/4",
 566         "1/8",
 567         "0",
 568 };
 569
 570 static const struct soc_enum drc_r1 =
 571         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
 572
 573 static const char *drc_attack_text[] = {
 574         "Reserved",
 575         "181us",
 576         "363us",
 577         "726us",
 578         "1.45ms",
 579         "2.9ms",
 580         "5.8ms",
 581         "11.6ms",
 582         "23.2ms",
 583         "46.4ms",
 584         "92.8ms",
 585         "185.6ms",
 586 };
 587
 588 static const struct soc_enum drc_attack =
 589         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
 590
 591 static const char *drc_decay_text[] = {
 592         "186ms",
 593         "372ms",
 594         "743ms",
 595         "1.49s",
 596         "2.97ms",
 597         "5.94ms",
 598         "11.89ms",
 599         "23.78ms",
 600         "47.56ms",
 601 };
 602
 603 static const struct soc_enum drc_decay =
 604         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
 605
 606 static const char *drc_ff_text[] = {
 607         "5 samples",
 608         "9 samples",
 609 };
 610
 611 static const struct soc_enum drc_ff =
 612         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
 613
 614 static const char *drc_qr_rate_text[] = {
 615         "0.725ms",
 616         "1.45ms",
 617         "5.8ms",
 618 };
 619
 620 static const struct soc_enum drc_qr_rate =
 621         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
 622
 623 static const char *drc_smooth_text[] = {
 624         "Low",
 625         "Medium",
 626         "High",
 627 };
 628
 629 static const struct soc_enum drc_smooth =
 630         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
 631
 632 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
 633 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
 634                5, 9, 12, 0, sidetone_tlv),
 635
 636 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
 637 SOC_ENUM("DRC Path", drc_path),
 638 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
 639                2, 60, 1, drc_comp_threash),
 640 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
 641                11, 30, 1, drc_comp_amp),
 642 SOC_ENUM("DRC R0", drc_r0),
 643 SOC_ENUM("DRC R1", drc_r1),
 644 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
 645                drc_min_tlv),
 646 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
 647                drc_max_tlv),
 648 SOC_ENUM("DRC Attack Rate", drc_attack),
 649 SOC_ENUM("DRC Decay Rate", drc_decay),
 650 SOC_ENUM("DRC FF Delay", drc_ff),
 651 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
 652 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
 653 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
 654                drc_qr_tlv),
 655 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
 656 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
 657 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
 658 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
 659 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
 660                drc_startup_tlv),
 661
 662 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
 663
 664 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
 665                  WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 666 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
 667 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
 668
 669 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
 670                  WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 671 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
 672                dac_boost_tlv),
 673 SOC_ENUM("DAC Deemphasis", dac_deemph),
 674
 675 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
 676                2, 1, 1, wm_hubs_spkmix_tlv),
 677
 678 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
 679                2, 1, 1, wm_hubs_spkmix_tlv),
 680 };
 681
 682 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
 683 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
 684 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
 685 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
 686 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
 687 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
 688 };
 689
 690 static int clk_sys_event(struct snd_soc_dapm_widget *w,
 691                          struct snd_kcontrol *kcontrol, int event)
 692 {
 693         struct snd_soc_codec *codec = w->codec;
 694
 695         switch (event) {
 696         case SND_SOC_DAPM_PRE_PMU:
 697                 return configure_clock(codec);
 698
 699         case SND_SOC_DAPM_POST_PMD:
 700                 break;
 701         }
 702
 703         return 0;
 704 }
 705
 706 /*
 707  * When used with DAC outputs only the WM8993 charge pump supports
 708  * operation in class W mode, providing very low power consumption
 709  * when used with digital sources.  Enable and disable this mode
 710  * automatically depending on the mixer configuration.
 711  *
 712  * Currently the only supported paths are the direct DAC->headphone
 713  * paths (which provide minimum power consumption anyway).
 714  */
 715 static int class_w_put(struct snd_kcontrol *kcontrol,
 716                        struct snd_ctl_elem_value *ucontrol)
 717 {
 718         struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
 719         struct snd_soc_codec *codec = widget->codec;
 720         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 721         int ret;
 722
 723         /* Turn it off if we're using the main output mixer */
 724         if (ucontrol->value.integer.value[0] == 0) {
 725                 if (wm8993->class_w_users == 0) {
 726                         dev_dbg(codec->dev, "Disabling Class W\n");
 727                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
 728                                             WM8993_CP_DYN_FREQ |
 729                                             WM8993_CP_DYN_V,
 730                                             0);
 731                 }
 732                 wm8993->class_w_users++;
 733         }
 734
 735         /* Implement the change */
 736         ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
 737
 738         /* Enable it if we're using the direct DAC path */
 739         if (ucontrol->value.integer.value[0] == 1) {
 740                 if (wm8993->class_w_users == 1) {
 741                         dev_dbg(codec->dev, "Enabling Class W\n");
 742                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
 743                                             WM8993_CP_DYN_FREQ |
 744                                             WM8993_CP_DYN_V,
 745                                             WM8993_CP_DYN_FREQ |
 746                                             WM8993_CP_DYN_V);
 747                 }
 748                 wm8993->class_w_users--;
 749         }
 750
 751         dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
 752                 wm8993->class_w_users);
 753
 754         return ret;
 755 }
 756
 757 #define SOC_DAPM_ENUM_W(xname, xenum) \
 758 {       .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 759         .info = snd_soc_info_enum_double, \
 760         .get = snd_soc_dapm_get_enum_double, \
 761         .put = class_w_put, \
 762         .private_value = (unsigned long)&xenum }
 763
 764 static const char *hp_mux_text[] = {
 765         "Mixer",
 766         "DAC",
 767 };
 768
 769 static const struct soc_enum hpl_enum =
 770         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
 771
 772 static const struct snd_kcontrol_new hpl_mux =
 773         SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
 774
 775 static const struct soc_enum hpr_enum =
 776         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
 777
 778 static const struct snd_kcontrol_new hpr_mux =
 779         SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
 780
 781 static const struct snd_kcontrol_new left_speaker_mixer[] = {
 782 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
 783 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
 784 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
 785 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 786 };
 787
 788 static const struct snd_kcontrol_new right_speaker_mixer[] = {
 789 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 790 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
 791 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
 792 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
 793 };
 794
 795 static const char *aif_text[] = {
 796         "Left", "Right"
 797 };
 798
 799 static const struct soc_enum aifoutl_enum =
 800         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
 801
 802 static const struct snd_kcontrol_new aifoutl_mux =
 803         SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
 804
 805 static const struct soc_enum aifoutr_enum =
 806         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
 807
 808 static const struct snd_kcontrol_new aifoutr_mux =
 809         SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
 810
 811 static const struct soc_enum aifinl_enum =
 812         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
 813
 814 static const struct snd_kcontrol_new aifinl_mux =
 815         SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
 816
 817 static const struct soc_enum aifinr_enum =
 818         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
 819
 820 static const struct snd_kcontrol_new aifinr_mux =
 821         SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
 822
 823 static const char *sidetone_text[] = {
 824         "None", "Left", "Right"
 825 };
 826
 827 static const struct soc_enum sidetonel_enum =
 828         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
 829
 830 static const struct snd_kcontrol_new sidetonel_mux =
 831         SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
 832
 833 static const struct soc_enum sidetoner_enum =
 834         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
 835
 836 static const struct snd_kcontrol_new sidetoner_mux =
 837         SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
 838
 839 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
 840 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
 841                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 842 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
 843 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
 844
 845 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
 846 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
 847
 848 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
 849 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
 850
 851 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 852 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 853
 854 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 855 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
 856
 857 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
 858 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
 859
 860 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
 861 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
 862
 863 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
 864 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
 865
 866 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
 867 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
 868
 869 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
 870                    left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
 871 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
 872                    right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 873
 874 };
 875
 876 static const struct snd_soc_dapm_route routes[] = {
 877         { "ADCL", NULL, "CLK_SYS" },
 878         { "ADCL", NULL, "CLK_DSP" },
 879         { "ADCR", NULL, "CLK_SYS" },
 880         { "ADCR", NULL, "CLK_DSP" },
 881
 882         { "AIFOUTL Mux", "Left", "ADCL" },
 883         { "AIFOUTL Mux", "Right", "ADCR" },
 884         { "AIFOUTR Mux", "Left", "ADCL" },
 885         { "AIFOUTR Mux", "Right", "ADCR" },
 886
 887         { "AIFOUTL", NULL, "AIFOUTL Mux" },
 888         { "AIFOUTR", NULL, "AIFOUTR Mux" },
 889
 890         { "DACL Mux", "Left", "AIFINL" },
 891         { "DACL Mux", "Right", "AIFINR" },
 892         { "DACR Mux", "Left", "AIFINL" },
 893         { "DACR Mux", "Right", "AIFINR" },
 894
 895         { "DACL Sidetone", "Left", "ADCL" },
 896         { "DACL Sidetone", "Right", "ADCR" },
 897         { "DACR Sidetone", "Left", "ADCL" },
 898         { "DACR Sidetone", "Right", "ADCR" },
 899
 900         { "DACL", NULL, "CLK_SYS" },
 901         { "DACL", NULL, "CLK_DSP" },
 902         { "DACL", NULL, "DACL Mux" },
 903         { "DACL", NULL, "DACL Sidetone" },
 904         { "DACR", NULL, "CLK_SYS" },
 905         { "DACR", NULL, "CLK_DSP" },
 906         { "DACR", NULL, "DACR Mux" },
 907         { "DACR", NULL, "DACR Sidetone" },
 908
 909         { "Left Output Mixer", "DAC Switch", "DACL" },
 910
 911         { "Right Output Mixer", "DAC Switch", "DACR" },
 912
 913         { "Left Output PGA", NULL, "CLK_SYS" },
 914
 915         { "Right Output PGA", NULL, "CLK_SYS" },
 916
 917         { "SPKL", "DAC Switch", "DACL" },
 918         { "SPKL", NULL, "CLK_SYS" },
 919
 920         { "SPKR", "DAC Switch", "DACR" },
 921         { "SPKR", NULL, "CLK_SYS" },
 922
 923         { "Left Headphone Mux", "DAC", "DACL" },
 924         { "Right Headphone Mux", "DAC", "DACR" },
 925 };
 926
 927 static void wm8993_cache_restore(struct snd_soc_codec *codec)
 928 {
 929         u16 *cache = codec->reg_cache;
 930         int i;
 931
 932         if (!codec->cache_sync)
 933                 return;
 934
 935         /* Reenable hardware writes */
 936         codec->cache_only = 0;
 937
 938         /* Restore the register settings */
 939         for (i = 1; i < WM8993_MAX_REGISTER; i++) {
 940                 if (cache[i] == wm8993_reg_defaults[i])
 941                         continue;
 942                 snd_soc_write(codec, i, cache[i]);
 943         }
 944
 945         /* We're in sync again */
 946         codec->cache_sync = 0;
 947 }
 948
 949 static int wm8993_set_bias_level(struct snd_soc_codec *codec,
 950                                  enum snd_soc_bias_level level)
 951 {
 952         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 953         int ret;
 954
 955         switch (level) {
 956         case SND_SOC_BIAS_ON:
 957         case SND_SOC_BIAS_PREPARE:
 958                 /* VMID=2*40k */
 959                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
 960                                     WM8993_VMID_SEL_MASK, 0x2);
 961                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
 962                                     WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
 963                 break;
 964
 965         case SND_SOC_BIAS_STANDBY:
 966                 if (codec->bias_level == SND_SOC_BIAS_OFF) {
 967                         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
 968                                                     wm8993->supplies);
 969                         if (ret != 0)
 970                                 return ret;
 971
 972                         wm8993_cache_restore(codec);
 973
 974                         /* Tune DC servo configuration */
 975                         snd_soc_write(codec, 0x44, 3);
 976                         snd_soc_write(codec, 0x56, 3);
 977                         snd_soc_write(codec, 0x44, 0);
 978
 979                         /* Bring up VMID with fast soft start */
 980                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
 981                                             WM8993_STARTUP_BIAS_ENA |
 982                                             WM8993_VMID_BUF_ENA |
 983                                             WM8993_VMID_RAMP_MASK |
 984                                             WM8993_BIAS_SRC,
 985                                             WM8993_STARTUP_BIAS_ENA |
 986                                             WM8993_VMID_BUF_ENA |
 987                                             WM8993_VMID_RAMP_MASK |
 988                                             WM8993_BIAS_SRC);
 989
 990                         /* If either line output is single ended we
 991                          * need the VMID buffer */
 992                         if (!wm8993->pdata.lineout1_diff ||
 993                             !wm8993->pdata.lineout2_diff)
 994                                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
 995                                                  WM8993_LINEOUT_VMID_BUF_ENA,
 996                                                  WM8993_LINEOUT_VMID_BUF_ENA);
 997
 998                         /* VMID=2*40k */
 999                         snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1000                                             WM8993_VMID_SEL_MASK |
1001                                             WM8993_BIAS_ENA,
1002                                             WM8993_BIAS_ENA | 0x2);
1003                         msleep(32);
1004
1005                         /* Switch to normal bias */
1006                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1007                                             WM8993_BIAS_SRC |
1008                                             WM8993_STARTUP_BIAS_ENA, 0);
1009                 }
1010
1011                 /* VMID=2*240k */
1012                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1013                                     WM8993_VMID_SEL_MASK, 0x4);
1014
1015                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1016                                     WM8993_TSHUT_ENA, 0);
1017                 break;
1018
1019         case SND_SOC_BIAS_OFF:
1020                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1021                                     WM8993_LINEOUT_VMID_BUF_ENA, 0);
1022
1023                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1024                                     WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1025                                     0);
1026
1027 #ifdef CONFIG_REGULATOR
1028                /* Post 2.6.34 we will be able to get a callback when
1029                 * the regulators are disabled which we can use but
1030                 * for now just assume that the power will be cut if
1031                 * the regulator API is in use.
1032                 */
1033                 codec->cache_sync = 1;
1034 #endif
1035
1036                 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1037                                        wm8993->supplies);
1038                 break;
1039         }
1040
1041         codec->bias_level = level;
1042
1043         return 0;
1044 }
1045
1046 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1047                              int clk_id, unsigned int freq, int dir)
1048 {
1049         struct snd_soc_codec *codec = codec_dai->codec;
1050         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1051
1052         switch (clk_id) {
1053         case WM8993_SYSCLK_MCLK:
1054                 wm8993->mclk_rate = freq;
1055         case WM8993_SYSCLK_FLL:
1056                 wm8993->sysclk_source = clk_id;
1057                 break;
1058
1059         default:
1060                 return -EINVAL;
1061         }
1062
1063         return 0;
1064 }
1065
1066 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1067                               unsigned int fmt)
1068 {
1069         struct snd_soc_codec *codec = dai->codec;
1070         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1071         unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1072         unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1073
1074         aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1075                   WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1076         aif4 &= ~WM8993_LRCLK_DIR;
1077
1078         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1079         case SND_SOC_DAIFMT_CBS_CFS:
1080                 wm8993->master = 0;
1081                 break;
1082         case SND_SOC_DAIFMT_CBS_CFM:
1083                 aif4 |= WM8993_LRCLK_DIR;
1084                 wm8993->master = 1;
1085                 break;
1086         case SND_SOC_DAIFMT_CBM_CFS:
1087                 aif1 |= WM8993_BCLK_DIR;
1088                 wm8993->master = 1;
1089                 break;
1090         case SND_SOC_DAIFMT_CBM_CFM:
1091                 aif1 |= WM8993_BCLK_DIR;
1092                 aif4 |= WM8993_LRCLK_DIR;
1093                 wm8993->master = 1;
1094                 break;
1095         default:
1096                 return -EINVAL;
1097         }
1098
1099         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1100         case SND_SOC_DAIFMT_DSP_B:
1101                 aif1 |= WM8993_AIF_LRCLK_INV;
1102         case SND_SOC_DAIFMT_DSP_A:
1103                 aif1 |= 0x18;
1104                 break;
1105         case SND_SOC_DAIFMT_I2S:
1106                 aif1 |= 0x10;
1107                 break;
1108         case SND_SOC_DAIFMT_RIGHT_J:
1109                 break;
1110         case SND_SOC_DAIFMT_LEFT_J:
1111                 aif1 |= 0x8;
1112                 break;
1113         default:
1114                 return -EINVAL;
1115         }
1116
1117         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1118         case SND_SOC_DAIFMT_DSP_A:
1119         case SND_SOC_DAIFMT_DSP_B:
1120                 /* frame inversion not valid for DSP modes */
1121                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1122                 case SND_SOC_DAIFMT_NB_NF:
1123                         break;
1124                 case SND_SOC_DAIFMT_IB_NF:
1125                         aif1 |= WM8993_AIF_BCLK_INV;
1126                         break;
1127                 default:
1128                         return -EINVAL;
1129                 }
1130                 break;
1131
1132         case SND_SOC_DAIFMT_I2S:
1133         case SND_SOC_DAIFMT_RIGHT_J:
1134         case SND_SOC_DAIFMT_LEFT_J:
1135                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1136                 case SND_SOC_DAIFMT_NB_NF:
1137                         break;
1138                 case SND_SOC_DAIFMT_IB_IF:
1139                         aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1140                         break;
1141                 case SND_SOC_DAIFMT_IB_NF:
1142                         aif1 |= WM8993_AIF_BCLK_INV;
1143                         break;
1144                 case SND_SOC_DAIFMT_NB_IF:
1145                         aif1 |= WM8993_AIF_LRCLK_INV;
1146                         break;
1147                 default:
1148                         return -EINVAL;
1149                 }
1150                 break;
1151         default:
1152                 return -EINVAL;
1153         }
1154
1155         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1156         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1157
1158         return 0;
1159 }
1160
1161 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1162                             struct snd_pcm_hw_params *params,
1163                             struct snd_soc_dai *dai)
1164 {
1165         struct snd_soc_codec *codec = dai->codec;
1166         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1167         int ret, i, best, best_val, cur_val;
1168         unsigned int clocking1, clocking3, aif1, aif4;
1169
1170         clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1171         clocking1 &= ~WM8993_BCLK_DIV_MASK;
1172
1173         clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1174         clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1175
1176         aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1177         aif1 &= ~WM8993_AIF_WL_MASK;
1178
1179         aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1180         aif4 &= ~WM8993_LRCLK_RATE_MASK;
1181
1182         /* What BCLK do we need? */
1183         wm8993->fs = params_rate(params);
1184         wm8993->bclk = 2 * wm8993->fs;
1185         if (wm8993->tdm_slots) {
1186                 dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1187                         wm8993->tdm_slots, wm8993->tdm_width);
1188                 wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1189         } else {
1190                 switch (params_format(params)) {
1191                 case SNDRV_PCM_FORMAT_S16_LE:
1192                         wm8993->bclk *= 16;
1193                         break;
1194                 case SNDRV_PCM_FORMAT_S20_3LE:
1195                         wm8993->bclk *= 20;
1196                         aif1 |= 0x8;
1197                         break;
1198                 case SNDRV_PCM_FORMAT_S24_LE:
1199                         wm8993->bclk *= 24;
1200                         aif1 |= 0x10;
1201                         break;
1202                 case SNDRV_PCM_FORMAT_S32_LE:
1203                         wm8993->bclk *= 32;
1204                         aif1 |= 0x18;
1205                         break;
1206                 default:
1207                         return -EINVAL;
1208                 }
1209         }
1210
1211         dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1212
1213         ret = configure_clock(codec);
1214         if (ret != 0)
1215                 return ret;
1216
1217         /* Select nearest CLK_SYS_RATE */
1218         best = 0;
1219         best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1220                        - wm8993->fs);
1221         for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1222                 cur_val = abs((wm8993->sysclk_rate /
1223                                clk_sys_rates[i].ratio) - wm8993->fs);;
1224                 if (cur_val < best_val) {
1225                         best = i;
1226                         best_val = cur_val;
1227                 }
1228         }
1229         dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1230                 clk_sys_rates[best].ratio);
1231         clocking3 |= (clk_sys_rates[best].clk_sys_rate
1232                       << WM8993_CLK_SYS_RATE_SHIFT);
1233
1234         /* SAMPLE_RATE */
1235         best = 0;
1236         best_val = abs(wm8993->fs - sample_rates[0].rate);
1237         for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1238                 /* Closest match */
1239                 cur_val = abs(wm8993->fs - sample_rates[i].rate);
1240                 if (cur_val < best_val) {
1241                         best = i;
1242                         best_val = cur_val;
1243                 }
1244         }
1245         dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1246                 sample_rates[best].rate);
1247         clocking3 |= (sample_rates[best].sample_rate
1248                       << WM8993_SAMPLE_RATE_SHIFT);
1249
1250         /* BCLK_DIV */
1251         best = 0;
1252         best_val = INT_MAX;
1253         for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1254                 cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1255                         - wm8993->bclk;
1256                 if (cur_val < 0) /* Table is sorted */
1257                         break;
1258                 if (cur_val < best_val) {
1259                         best = i;
1260                         best_val = cur_val;
1261                 }
1262         }
1263         wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1264         dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1265                 bclk_divs[best].div, wm8993->bclk);
1266         clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1267
1268         /* LRCLK is a simple fraction of BCLK */
1269         dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1270         aif4 |= wm8993->bclk / wm8993->fs;
1271
1272         snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1273         snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1274         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1275         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1276
1277         /* ReTune Mobile? */
1278         if (wm8993->pdata.num_retune_configs) {
1279                 u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1280                 struct wm8993_retune_mobile_setting *s;
1281
1282                 best = 0;
1283                 best_val = abs(wm8993->pdata.retune_configs[0].rate
1284                                - wm8993->fs);
1285                 for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1286                         cur_val = abs(wm8993->pdata.retune_configs[i].rate
1287                                       - wm8993->fs);
1288                         if (cur_val < best_val) {
1289                                 best_val = cur_val;
1290                                 best = i;
1291                         }
1292                 }
1293                 s = &wm8993->pdata.retune_configs[best];
1294
1295                 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1296                         s->name, s->rate);
1297
1298                 /* Disable EQ while we reconfigure */
1299                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1300
1301                 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1302                         snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1303
1304                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1305         }
1306
1307         return 0;
1308 }
1309
1310 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1311 {
1312         struct snd_soc_codec *codec = codec_dai->codec;
1313         unsigned int reg;
1314
1315         reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1316
1317         if (mute)
1318                 reg |= WM8993_DAC_MUTE;
1319         else
1320                 reg &= ~WM8993_DAC_MUTE;
1321
1322         snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1323
1324         return 0;
1325 }
1326
1327 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1328                                unsigned int rx_mask, int slots, int slot_width)
1329 {
1330         struct snd_soc_codec *codec = dai->codec;
1331         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1332         int aif1 = 0;
1333         int aif2 = 0;
1334
1335         /* Don't need to validate anything if we're turning off TDM */
1336         if (slots == 0) {
1337                 wm8993->tdm_slots = 0;
1338                 goto out;
1339         }
1340
1341         /* Note that we allow configurations we can't handle ourselves -
1342          * for example, we can generate clocks for slots 2 and up even if
1343          * we can't use those slots ourselves.
1344          */
1345         aif1 |= WM8993_AIFADC_TDM;
1346         aif2 |= WM8993_AIFDAC_TDM;
1347
1348         switch (rx_mask) {
1349         case 3:
1350                 break;
1351         case 0xc:
1352                 aif1 |= WM8993_AIFADC_TDM_CHAN;
1353                 break;
1354         default:
1355                 return -EINVAL;
1356         }
1357
1358
1359         switch (tx_mask) {
1360         case 3:
1361                 break;
1362         case 0xc:
1363                 aif2 |= WM8993_AIFDAC_TDM_CHAN;
1364                 break;
1365         default:
1366                 return -EINVAL;
1367         }
1368
1369 out:
1370         wm8993->tdm_width = slot_width;
1371         wm8993->tdm_slots = slots / 2;
1372
1373         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1374                             WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1375         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1376                             WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1377
1378         return 0;
1379 }
1380
1381 static struct snd_soc_dai_ops wm8993_ops = {
1382         .set_sysclk = wm8993_set_sysclk,
1383         .set_fmt = wm8993_set_dai_fmt,
1384         .hw_params = wm8993_hw_params,
1385         .digital_mute = wm8993_digital_mute,
1386         .set_pll = wm8993_set_fll,
1387         .set_tdm_slot = wm8993_set_tdm_slot,
1388 };
1389
1390 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1391
1392 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1393                         SNDRV_PCM_FMTBIT_S20_3LE |\
1394                         SNDRV_PCM_FMTBIT_S24_LE |\
1395                         SNDRV_PCM_FMTBIT_S32_LE)
1396
1397 struct snd_soc_dai wm8993_dai = {
1398         .name = "WM8993",
1399         .playback = {
1400                 .stream_name = "Playback",
1401                 .channels_min = 1,
1402                 .channels_max = 2,
1403                 .rates = WM8993_RATES,
1404                 .formats = WM8993_FORMATS,
1405         },
1406         .capture = {
1407                  .stream_name = "Capture",
1408                  .channels_min = 1,
1409                  .channels_max = 2,
1410                  .rates = WM8993_RATES,
1411                  .formats = WM8993_FORMATS,
1412          },
1413         .ops = &wm8993_ops,
1414         .symmetric_rates = 1,
1415 };
1416 EXPORT_SYMBOL_GPL(wm8993_dai);
1417
1418 static struct snd_soc_codec *wm8993_codec;
1419
1420 static int wm8993_probe(struct platform_device *pdev)
1421 {
1422         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1423         struct snd_soc_codec *codec;
1424         struct wm8993_priv *wm8993;
1425         int ret = 0;
1426
1427         if (!wm8993_codec) {
1428                 dev_err(&pdev->dev, "I2C device not yet probed\n");
1429                 goto err;
1430         }
1431
1432         socdev->card->codec = wm8993_codec;
1433         codec = wm8993_codec;
1434         wm8993 = snd_soc_codec_get_drvdata(codec);
1435
1436         ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
1437         if (ret < 0) {
1438                 dev_err(codec->dev, "failed to create pcms\n");
1439                 goto err;
1440         }
1441
1442         snd_soc_add_controls(codec, wm8993_snd_controls,
1443                              ARRAY_SIZE(wm8993_snd_controls));
1444         if (wm8993->pdata.num_retune_configs != 0) {
1445                 dev_dbg(codec->dev, "Using ReTune Mobile\n");
1446         } else {
1447                 dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1448                 snd_soc_add_controls(codec, wm8993_eq_controls,
1449                                      ARRAY_SIZE(wm8993_eq_controls));
1450         }
1451
1452         snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
1453                                   ARRAY_SIZE(wm8993_dapm_widgets));
1454         wm_hubs_add_analogue_controls(codec);
1455
1456         snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
1457         wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1458                                     wm8993->pdata.lineout2_diff);
1459
1460         return ret;
1461
1462 err:
1463         return ret;
1464 }
1465
1466 static int wm8993_remove(struct platform_device *pdev)
1467 {
1468         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1469
1470         snd_soc_free_pcms(socdev);
1471         snd_soc_dapm_free(socdev);
1472
1473         return 0;
1474 }
1475
1476 #ifdef CONFIG_PM
1477 static int wm8993_suspend(struct platform_device *pdev, pm_message_t state)
1478 {
1479         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1480         struct snd_soc_codec *codec = socdev->card->codec;
1481         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1482         int fll_fout = wm8993->fll_fout;
1483         int fll_fref  = wm8993->fll_fref;
1484         int ret;
1485
1486         /* Stop the FLL in an orderly fashion */
1487         ret = wm8993_set_fll(codec->dai, 0, 0, 0, 0);
1488         if (ret != 0) {
1489                 dev_err(&pdev->dev, "Failed to stop FLL\n");
1490                 return ret;
1491         }
1492
1493         wm8993->fll_fout = fll_fout;
1494         wm8993->fll_fref = fll_fref;
1495
1496         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1497
1498         return 0;
1499 }
1500
1501 static int wm8993_resume(struct platform_device *pdev)
1502 {
1503         struct snd_soc_device *socdev = platform_get_drvdata(pdev);
1504         struct snd_soc_codec *codec = socdev->card->codec;
1505         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1506         int ret;
1507
1508         wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1509
1510         /* Restart the FLL? */
1511         if (wm8993->fll_fout) {
1512                 int fll_fout = wm8993->fll_fout;
1513                 int fll_fref  = wm8993->fll_fref;
1514
1515                 wm8993->fll_fref = 0;
1516                 wm8993->fll_fout = 0;
1517
1518                 ret = wm8993_set_fll(codec->dai, 0, wm8993->fll_src,
1519                                      fll_fref, fll_fout);
1520                 if (ret != 0)
1521                         dev_err(codec->dev, "Failed to restart FLL\n");
1522         }
1523
1524         return 0;
1525 }
1526 #else
1527 #define wm8993_suspend NULL
1528 #define wm8993_resume NULL
1529 #endif
1530
1531 struct snd_soc_codec_device soc_codec_dev_wm8993 = {
1532         .probe =        wm8993_probe,
1533         .remove =       wm8993_remove,
1534         .suspend =      wm8993_suspend,
1535         .resume =       wm8993_resume,
1536 };
1537 EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
1538
1539 static int wm8993_i2c_probe(struct i2c_client *i2c,
1540                             const struct i2c_device_id *id)
1541 {
1542         struct wm8993_priv *wm8993;
1543         struct snd_soc_codec *codec;
1544         unsigned int val;
1545         int ret;
1546         int i;
1547
1548         if (wm8993_codec) {
1549                 dev_err(&i2c->dev, "A WM8993 is already registered\n");
1550                 return -EINVAL;
1551         }
1552
1553         wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
1554         if (wm8993 == NULL)
1555                 return -ENOMEM;
1556
1557         codec = &wm8993->codec;
1558         if (i2c->dev.platform_data)
1559                 memcpy(&wm8993->pdata, i2c->dev.platform_data,
1560                        sizeof(wm8993->pdata));
1561
1562         mutex_init(&codec->mutex);
1563         INIT_LIST_HEAD(&codec->dapm_widgets);
1564         INIT_LIST_HEAD(&codec->dapm_paths);
1565
1566         codec->name = "WM8993";
1567         codec->volatile_register = wm8993_volatile;
1568         codec->reg_cache = wm8993->reg_cache;
1569         codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
1570         codec->bias_level = SND_SOC_BIAS_OFF;
1571         codec->set_bias_level = wm8993_set_bias_level;
1572         codec->dai = &wm8993_dai;
1573         codec->num_dai = 1;
1574         snd_soc_codec_set_drvdata(codec, wm8993);
1575
1576         wm8993->hubs_data.hp_startup_mode = 1;
1577         wm8993->hubs_data.dcs_codes = -2;
1578
1579         memcpy(wm8993->reg_cache, wm8993_reg_defaults,
1580                sizeof(wm8993->reg_cache));
1581
1582         ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
1583         if (ret != 0) {
1584                 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1585                 goto err;
1586         }
1587
1588         i2c_set_clientdata(i2c, wm8993);
1589         codec->control_data = i2c;
1590         wm8993_codec = codec;
1591
1592         codec->dev = &i2c->dev;
1593
1594         for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1595                 wm8993->supplies[i].supply = wm8993_supply_names[i];
1596
1597         ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
1598                                  wm8993->supplies);
1599         if (ret != 0) {
1600                 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1601                 goto err;
1602         }
1603
1604         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1605                                     wm8993->supplies);
1606         if (ret != 0) {
1607                 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
1608                 goto err_get;
1609         }
1610
1611         val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
1612         if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
1613                 dev_err(codec->dev, "Invalid ID register value %x\n", val);
1614                 ret = -EINVAL;
1615                 goto err_enable;
1616         }
1617
1618         ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
1619         if (ret != 0)
1620                 goto err_enable;
1621
1622         codec->cache_only = 1;
1623
1624         /* By default we're using the output mixers */
1625         wm8993->class_w_users = 2;
1626
1627         /* Latch volume update bits and default ZC on */
1628         snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1629                             WM8993_DAC_VU, WM8993_DAC_VU);
1630         snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1631                             WM8993_ADC_VU, WM8993_ADC_VU);
1632
1633         /* Manualy manage the HPOUT sequencing for independent stereo
1634          * control. */
1635         snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1636                             WM8993_HPOUT1_AUTO_PU, 0);
1637
1638         /* Use automatic clock configuration */
1639         snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1640
1641         wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1642                                       wm8993->pdata.lineout2_diff,
1643                                       wm8993->pdata.lineout1fb,
1644                                       wm8993->pdata.lineout2fb,
1645                                       wm8993->pdata.jd_scthr,
1646                                       wm8993->pdata.jd_thr,
1647                                       wm8993->pdata.micbias1_lvl,
1648                                       wm8993->pdata.micbias2_lvl);
1649
1650         ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1651         if (ret != 0)
1652                 goto err_enable;
1653
1654         wm8993_dai.dev = codec->dev;
1655
1656         ret = snd_soc_register_dai(&wm8993_dai);
1657         if (ret != 0)
1658                 goto err_bias;
1659
1660         ret = snd_soc_register_codec(codec);
1661
1662         return 0;
1663
1664 err_bias:
1665         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1666 err_enable:
1667         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1668 err_get:
1669         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1670 err:
1671         wm8993_codec = NULL;
1672         kfree(wm8993);
1673         return ret;
1674 }
1675
1676 static int wm8993_i2c_remove(struct i2c_client *client)
1677 {
1678         struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
1679
1680         snd_soc_unregister_codec(&wm8993->codec);
1681         snd_soc_unregister_dai(&wm8993_dai);
1682
1683         wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
1684         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1685         kfree(wm8993);
1686
1687         return 0;
1688 }
1689
1690 static const struct i2c_device_id wm8993_i2c_id[] = {
1691         { "wm8993", 0 },
1692         { }
1693 };
1694 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1695
1696 static struct i2c_driver wm8993_i2c_driver = {
1697         .driver = {
1698                 .name = "WM8993",
1699                 .owner = THIS_MODULE,
1700         },
1701         .probe = wm8993_i2c_probe,
1702         .remove = wm8993_i2c_remove,
1703         .id_table = wm8993_i2c_id,
1704 };
1705
1706
1707 static int __init wm8993_modinit(void)
1708 {
1709         int ret;
1710
1711         ret = i2c_add_driver(&wm8993_i2c_driver);
1712         if (ret != 0)
1713                 pr_err("WM8993: Unable to register I2C driver: %d\n", ret);
1714
1715         return ret;
1716 }
1717 module_init(wm8993_modinit);
1718
1719 static void __exit wm8993_exit(void)
1720 {
1721         i2c_del_driver(&wm8993_i2c_driver);
1722 }
1723 module_exit(wm8993_exit);
1724
1725
1726 MODULE_DESCRIPTION("ASoC WM8993 driver");
1727 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1728 MODULE_LICENSE("GPL");