wimax: oops: wimax_dev_add() is the only one that can initialize the state
[safe/jmp/linux-2.6] / net / rds / info.c
1 /*
2  * Copyright (c) 2006 Oracle.  All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  *
32  */
33 #include <linux/percpu.h>
34 #include <linux/seq_file.h>
35 #include <linux/proc_fs.h>
36
37 #include "rds.h"
38
39 /*
40  * This file implements a getsockopt() call which copies a set of fixed
41  * sized structs into a user-specified buffer as a means of providing
42  * read-only information about RDS.
43  *
44  * For a given information source there are a given number of fixed sized
45  * structs at a given time.  The structs are only copied if the user-specified
46  * buffer is big enough.  The destination pages that make up the buffer
47  * are pinned for the duration of the copy.
48  *
49  * This gives us the following benefits:
50  *
51  * - simple implementation, no copy "position" across multiple calls
52  * - consistent snapshot of an info source
53  * - atomic copy works well with whatever locking info source has
54  * - one portable tool to get rds info across implementations
55  * - long-lived tool can get info without allocating
56  *
57  * at the following costs:
58  *
59  * - info source copy must be pinned, may be "large"
60  */
61
62 struct rds_info_iterator {
63         struct page **pages;
64         void *addr;
65         unsigned long offset;
66 };
67
68 static DEFINE_SPINLOCK(rds_info_lock);
69 static rds_info_func rds_info_funcs[RDS_INFO_LAST - RDS_INFO_FIRST + 1];
70
71 void rds_info_register_func(int optname, rds_info_func func)
72 {
73         int offset = optname - RDS_INFO_FIRST;
74
75         BUG_ON(optname < RDS_INFO_FIRST || optname > RDS_INFO_LAST);
76
77         spin_lock(&rds_info_lock);
78         BUG_ON(rds_info_funcs[offset] != NULL);
79         rds_info_funcs[offset] = func;
80         spin_unlock(&rds_info_lock);
81 }
82
83 void rds_info_deregister_func(int optname, rds_info_func func)
84 {
85         int offset = optname - RDS_INFO_FIRST;
86
87         BUG_ON(optname < RDS_INFO_FIRST || optname > RDS_INFO_LAST);
88
89         spin_lock(&rds_info_lock);
90         BUG_ON(rds_info_funcs[offset] != func);
91         rds_info_funcs[offset] = NULL;
92         spin_unlock(&rds_info_lock);
93 }
94
95 /*
96  * Typically we hold an atomic kmap across multiple rds_info_copy() calls
97  * because the kmap is so expensive.  This must be called before using blocking
98  * operations while holding the mapping and as the iterator is torn down.
99  */
100 void rds_info_iter_unmap(struct rds_info_iterator *iter)
101 {
102         if (iter->addr != NULL) {
103                 kunmap_atomic(iter->addr, KM_USER0);
104                 iter->addr = NULL;
105         }
106 }
107
108 /*
109  * get_user_pages() called flush_dcache_page() on the pages for us.
110  */
111 void rds_info_copy(struct rds_info_iterator *iter, void *data,
112                    unsigned long bytes)
113 {
114         unsigned long this;
115
116         while (bytes) {
117                 if (iter->addr == NULL)
118                         iter->addr = kmap_atomic(*iter->pages, KM_USER0);
119
120                 this = min(bytes, PAGE_SIZE - iter->offset);
121
122                 rdsdebug("page %p addr %p offset %lu this %lu data %p "
123                           "bytes %lu\n", *iter->pages, iter->addr,
124                           iter->offset, this, data, bytes);
125
126                 memcpy(iter->addr + iter->offset, data, this);
127
128                 data += this;
129                 bytes -= this;
130                 iter->offset += this;
131
132                 if (iter->offset == PAGE_SIZE) {
133                         kunmap_atomic(iter->addr, KM_USER0);
134                         iter->addr = NULL;
135                         iter->offset = 0;
136                         iter->pages++;
137                 }
138         }
139 }
140
141 /*
142  * @optval points to the userspace buffer that the information snapshot
143  * will be copied into.
144  *
145  * @optlen on input is the size of the buffer in userspace.  @optlen
146  * on output is the size of the requested snapshot in bytes.
147  *
148  * This function returns -errno if there is a failure, particularly -ENOSPC
149  * if the given userspace buffer was not large enough to fit the snapshot.
150  * On success it returns the positive number of bytes of each array element
151  * in the snapshot.
152  */
153 int rds_info_getsockopt(struct socket *sock, int optname, char __user *optval,
154                         int __user *optlen)
155 {
156         struct rds_info_iterator iter;
157         struct rds_info_lengths lens;
158         unsigned long nr_pages = 0;
159         unsigned long start;
160         unsigned long i;
161         rds_info_func func;
162         struct page **pages = NULL;
163         int ret;
164         int len;
165         int total;
166
167         if (get_user(len, optlen)) {
168                 ret = -EFAULT;
169                 goto out;
170         }
171
172         /* check for all kinds of wrapping and the like */
173         start = (unsigned long)optval;
174         if (len < 0 || len + PAGE_SIZE - 1 < len || start + len < start) {
175                 ret = -EINVAL;
176                 goto out;
177         }
178
179         /* a 0 len call is just trying to probe its length */
180         if (len == 0)
181                 goto call_func;
182
183         nr_pages = (PAGE_ALIGN(start + len) - (start & PAGE_MASK))
184                         >> PAGE_SHIFT;
185
186         pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
187         if (pages == NULL) {
188                 ret = -ENOMEM;
189                 goto out;
190         }
191         down_read(&current->mm->mmap_sem);
192         ret = get_user_pages(current, current->mm, start, nr_pages, 1, 0,
193                              pages, NULL);
194         up_read(&current->mm->mmap_sem);
195         if (ret != nr_pages) {
196                 if (ret > 0)
197                         nr_pages = ret;
198                 else
199                         nr_pages = 0;
200                 ret = -EAGAIN; /* XXX ? */
201                 goto out;
202         }
203
204         rdsdebug("len %d nr_pages %lu\n", len, nr_pages);
205
206 call_func:
207         func = rds_info_funcs[optname - RDS_INFO_FIRST];
208         if (func == NULL) {
209                 ret = -ENOPROTOOPT;
210                 goto out;
211         }
212
213         iter.pages = pages;
214         iter.addr = NULL;
215         iter.offset = start & (PAGE_SIZE - 1);
216
217         func(sock, len, &iter, &lens);
218         BUG_ON(lens.each == 0);
219
220         total = lens.nr * lens.each;
221
222         rds_info_iter_unmap(&iter);
223
224         if (total > len) {
225                 len = total;
226                 ret = -ENOSPC;
227         } else {
228                 len = total;
229                 ret = lens.each;
230         }
231
232         if (put_user(len, optlen))
233                 ret = -EFAULT;
234
235 out:
236         for (i = 0; pages != NULL && i < nr_pages; i++)
237                 put_page(pages[i]);
238         kfree(pages);
239
240         return ret;
241 }