SAFE public projects git trees. - safe/jmp/linux-2.6/blob - net/mac80211/main.c

   1 /*
   2  * Copyright 2002-2005, Instant802 Networks, Inc.
   3  * Copyright 2005-2006, Devicescape Software, Inc.
   4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <net/mac80211.h>
  12 #include <net/ieee80211_radiotap.h>
  13 #include <linux/module.h>
  14 #include <linux/init.h>
  15 #include <linux/netdevice.h>
  16 #include <linux/types.h>
  17 #include <linux/slab.h>
  18 #include <linux/skbuff.h>
  19 #include <linux/etherdevice.h>
  20 #include <linux/if_arp.h>
  21 #include <linux/wireless.h>
  22 #include <linux/rtnetlink.h>
  23 #include <linux/bitmap.h>
  24 #include <linux/pm_qos_params.h>
  25 #include <net/net_namespace.h>
  26 #include <net/cfg80211.h>
  27
  28 #include "ieee80211_i.h"
  29 #include "driver-ops.h"
  30 #include "rate.h"
  31 #include "mesh.h"
  32 #include "wep.h"
  33 #include "wme.h"
  34 #include "aes_ccm.h"
  35 #include "led.h"
  36 #include "cfg.h"
  37 #include "debugfs.h"
  38 #include "debugfs_netdev.h"
  39
  40 /*
  41  * For seeing transmitted packets on monitor interfaces
  42  * we have a radiotap header too.
  43  */
  44 struct ieee80211_tx_status_rtap_hdr {
  45         struct ieee80211_radiotap_header hdr;
  46         u8 rate;
  47         u8 padding_for_rate;
  48         __le16 tx_flags;
  49         u8 data_retries;
  50 } __attribute__ ((packed));
  51
  52
  53 /* must be called under mdev tx lock */
  54 void ieee80211_configure_filter(struct ieee80211_local *local)
  55 {
  56         unsigned int changed_flags;
  57         unsigned int new_flags = 0;
  58
  59         if (atomic_read(&local->iff_promiscs))
  60                 new_flags |= FIF_PROMISC_IN_BSS;
  61
  62         if (atomic_read(&local->iff_allmultis))
  63                 new_flags |= FIF_ALLMULTI;
  64
  65         if (local->monitors)
  66                 new_flags |= FIF_BCN_PRBRESP_PROMISC;
  67
  68         if (local->fif_fcsfail)
  69                 new_flags |= FIF_FCSFAIL;
  70
  71         if (local->fif_plcpfail)
  72                 new_flags |= FIF_PLCPFAIL;
  73
  74         if (local->fif_control)
  75                 new_flags |= FIF_CONTROL;
  76
  77         if (local->fif_other_bss)
  78                 new_flags |= FIF_OTHER_BSS;
  79
  80         changed_flags = local->filter_flags ^ new_flags;
  81
  82         /* be a bit nasty */
  83         new_flags |= (1<<31);
  84
  85         drv_configure_filter(local, changed_flags, &new_flags,
  86                              local->mdev->mc_count,
  87                              local->mdev->mc_list);
  88
  89         WARN_ON(new_flags & (1<<31));
  90
  91         local->filter_flags = new_flags & ~(1<<31);
  92 }
  93
  94 /* master interface */
  95
  96 static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
  97 {
  98         memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
  99         return ETH_ALEN;
 100 }
 101
 102 static const struct header_ops ieee80211_header_ops = {
 103         .create         = eth_header,
 104         .parse          = header_parse_80211,
 105         .rebuild        = eth_rebuild_header,
 106         .cache          = eth_header_cache,
 107         .cache_update   = eth_header_cache_update,
 108 };
 109
 110 static int ieee80211_master_open(struct net_device *dev)
 111 {
 112         struct ieee80211_master_priv *mpriv = netdev_priv(dev);
 113         struct ieee80211_local *local = mpriv->local;
 114         struct ieee80211_sub_if_data *sdata;
 115         int res = -EOPNOTSUPP;
 116
 117         /* we hold the RTNL here so can safely walk the list */
 118         list_for_each_entry(sdata, &local->interfaces, list) {
 119                 if (netif_running(sdata->dev)) {
 120                         res = 0;
 121                         break;
 122                 }
 123         }
 124
 125         if (res)
 126                 return res;
 127
 128         netif_tx_start_all_queues(local->mdev);
 129
 130         return 0;
 131 }
 132
 133 static int ieee80211_master_stop(struct net_device *dev)
 134 {
 135         struct ieee80211_master_priv *mpriv = netdev_priv(dev);
 136         struct ieee80211_local *local = mpriv->local;
 137         struct ieee80211_sub_if_data *sdata;
 138
 139         /* we hold the RTNL here so can safely walk the list */
 140         list_for_each_entry(sdata, &local->interfaces, list)
 141                 if (netif_running(sdata->dev))
 142                         dev_close(sdata->dev);
 143
 144         return 0;
 145 }
 146
 147 static void ieee80211_master_set_multicast_list(struct net_device *dev)
 148 {
 149         struct ieee80211_master_priv *mpriv = netdev_priv(dev);
 150         struct ieee80211_local *local = mpriv->local;
 151
 152         ieee80211_configure_filter(local);
 153 }
 154
 155 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 156 {
 157         struct ieee80211_channel *chan, *scan_chan;
 158         int ret = 0;
 159         int power;
 160         enum nl80211_channel_type channel_type;
 161
 162         might_sleep();
 163
 164         scan_chan = local->scan_channel;
 165
 166         if (scan_chan) {
 167                 chan = scan_chan;
 168                 channel_type = NL80211_CHAN_NO_HT;
 169         } else {
 170                 chan = local->oper_channel;
 171                 channel_type = local->oper_channel_type;
 172         }
 173
 174         if (chan != local->hw.conf.channel ||
 175             channel_type != local->hw.conf.channel_type) {
 176                 local->hw.conf.channel = chan;
 177                 local->hw.conf.channel_type = channel_type;
 178                 changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 179         }
 180
 181         if (scan_chan)
 182                 power = chan->max_power;
 183         else
 184                 power = local->power_constr_level ?
 185                         (chan->max_power - local->power_constr_level) :
 186                         chan->max_power;
 187
 188         if (local->user_power_level >= 0)
 189                 power = min(power, local->user_power_level);
 190
 191         if (local->hw.conf.power_level != power) {
 192                 changed |= IEEE80211_CONF_CHANGE_POWER;
 193                 local->hw.conf.power_level = power;
 194         }
 195
 196         if (changed && local->open_count) {
 197                 ret = drv_config(local, changed);
 198                 /*
 199                  * Goal:
 200                  * HW reconfiguration should never fail, the driver has told
 201                  * us what it can support so it should live up to that promise.
 202                  *
 203                  * Current status:
 204                  * rfkill is not integrated with mac80211 and a
 205                  * configuration command can thus fail if hardware rfkill
 206                  * is enabled
 207                  *
 208                  * FIXME: integrate rfkill with mac80211 and then add this
 209                  * WARN_ON() back
 210                  *
 211                  */
 212                 /* WARN_ON(ret); */
 213         }
 214
 215         return ret;
 216 }
 217
 218 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 219                                       u32 changed)
 220 {
 221         struct ieee80211_local *local = sdata->local;
 222         static const u8 zero[ETH_ALEN] = { 0 };
 223
 224         if (!changed)
 225                 return;
 226
 227         if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 228                 /*
 229                  * While not associated, claim a BSSID of all-zeroes
 230                  * so that drivers don't do any weird things with the
 231                  * BSSID at that time.
 232                  */
 233                 if (sdata->vif.bss_conf.assoc)
 234                         sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
 235                 else
 236                         sdata->vif.bss_conf.bssid = zero;
 237         } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
 238                 sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
 239         else if (sdata->vif.type == NL80211_IFTYPE_AP)
 240                 sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
 241         else if (ieee80211_vif_is_mesh(&sdata->vif)) {
 242                 sdata->vif.bss_conf.bssid = zero;
 243         } else {
 244                 WARN_ON(1);
 245                 return;
 246         }
 247
 248         switch (sdata->vif.type) {
 249         case NL80211_IFTYPE_AP:
 250         case NL80211_IFTYPE_ADHOC:
 251         case NL80211_IFTYPE_MESH_POINT:
 252                 break;
 253         default:
 254                 /* do not warn to simplify caller in scan.c */
 255                 changed &= ~BSS_CHANGED_BEACON_ENABLED;
 256                 if (WARN_ON(changed & BSS_CHANGED_BEACON))
 257                         return;
 258                 break;
 259         }
 260
 261         if (changed & BSS_CHANGED_BEACON_ENABLED) {
 262                 if (local->sw_scanning) {
 263                         sdata->vif.bss_conf.enable_beacon = false;
 264                 } else {
 265                         /*
 266                          * Beacon should be enabled, but AP mode must
 267                          * check whether there is a beacon configured.
 268                          */
 269                         switch (sdata->vif.type) {
 270                         case NL80211_IFTYPE_AP:
 271                                 sdata->vif.bss_conf.enable_beacon =
 272                                         !!rcu_dereference(sdata->u.ap.beacon);
 273                                 break;
 274                         case NL80211_IFTYPE_ADHOC:
 275                                 sdata->vif.bss_conf.enable_beacon =
 276                                         !!rcu_dereference(sdata->u.ibss.presp);
 277                                 break;
 278                         case NL80211_IFTYPE_MESH_POINT:
 279                                 sdata->vif.bss_conf.enable_beacon = true;
 280                                 break;
 281                         default:
 282                                 /* not reached */
 283                                 WARN_ON(1);
 284                                 break;
 285                         }
 286                 }
 287         }
 288
 289         drv_bss_info_changed(local, &sdata->vif,
 290                              &sdata->vif.bss_conf, changed);
 291
 292         /* DEPRECATED */
 293         local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
 294 }
 295
 296 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 297 {
 298         sdata->vif.bss_conf.use_cts_prot = false;
 299         sdata->vif.bss_conf.use_short_preamble = false;
 300         sdata->vif.bss_conf.use_short_slot = false;
 301         return BSS_CHANGED_ERP_CTS_PROT |
 302                BSS_CHANGED_ERP_PREAMBLE |
 303                BSS_CHANGED_ERP_SLOT;
 304 }
 305
 306 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
 307                                  struct sk_buff *skb)
 308 {
 309         struct ieee80211_local *local = hw_to_local(hw);
 310         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 311         int tmp;
 312
 313         skb->dev = local->mdev;
 314         skb->pkt_type = IEEE80211_TX_STATUS_MSG;
 315         skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
 316                        &local->skb_queue : &local->skb_queue_unreliable, skb);
 317         tmp = skb_queue_len(&local->skb_queue) +
 318                 skb_queue_len(&local->skb_queue_unreliable);
 319         while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
 320                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
 321                 dev_kfree_skb_irq(skb);
 322                 tmp--;
 323                 I802_DEBUG_INC(local->tx_status_drop);
 324         }
 325         tasklet_schedule(&local->tasklet);
 326 }
 327 EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
 328
 329 static void ieee80211_tasklet_handler(unsigned long data)
 330 {
 331         struct ieee80211_local *local = (struct ieee80211_local *) data;
 332         struct sk_buff *skb;
 333         struct ieee80211_rx_status rx_status;
 334         struct ieee80211_ra_tid *ra_tid;
 335
 336         while ((skb = skb_dequeue(&local->skb_queue)) ||
 337                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
 338                 switch (skb->pkt_type) {
 339                 case IEEE80211_RX_MSG:
 340                         /* status is in skb->cb */
 341                         memcpy(&rx_status, skb->cb, sizeof(rx_status));
 342                         /* Clear skb->pkt_type in order to not confuse kernel
 343                          * netstack. */
 344                         skb->pkt_type = 0;
 345                         __ieee80211_rx(local_to_hw(local), skb, &rx_status);
 346                         break;
 347                 case IEEE80211_TX_STATUS_MSG:
 348                         skb->pkt_type = 0;
 349                         ieee80211_tx_status(local_to_hw(local), skb);
 350                         break;
 351                 case IEEE80211_DELBA_MSG:
 352                         ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
 353                         ieee80211_stop_tx_ba_cb(local_to_hw(local),
 354                                                 ra_tid->ra, ra_tid->tid);
 355                         dev_kfree_skb(skb);
 356                         break;
 357                 case IEEE80211_ADDBA_MSG:
 358                         ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
 359                         ieee80211_start_tx_ba_cb(local_to_hw(local),
 360                                                  ra_tid->ra, ra_tid->tid);
 361                         dev_kfree_skb(skb);
 362                         break ;
 363                 default:
 364                         WARN(1, "mac80211: Packet is of unknown type %d\n",
 365                              skb->pkt_type);
 366                         dev_kfree_skb(skb);
 367                         break;
 368                 }
 369         }
 370 }
 371
 372 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 373                                             struct sta_info *sta,
 374                                             struct sk_buff *skb)
 375 {
 376         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 377
 378         sta->tx_filtered_count++;
 379
 380         /*
 381          * Clear the TX filter mask for this STA when sending the next
 382          * packet. If the STA went to power save mode, this will happen
 383          * when it wakes up for the next time.
 384          */
 385         set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
 386
 387         /*
 388          * This code races in the following way:
 389          *
 390          *  (1) STA sends frame indicating it will go to sleep and does so
 391          *  (2) hardware/firmware adds STA to filter list, passes frame up
 392          *  (3) hardware/firmware processes TX fifo and suppresses a frame
 393          *  (4) we get TX status before having processed the frame and
 394          *      knowing that the STA has gone to sleep.
 395          *
 396          * This is actually quite unlikely even when both those events are
 397          * processed from interrupts coming in quickly after one another or
 398          * even at the same time because we queue both TX status events and
 399          * RX frames to be processed by a tasklet and process them in the
 400          * same order that they were received or TX status last. Hence, there
 401          * is no race as long as the frame RX is processed before the next TX
 402          * status, which drivers can ensure, see below.
 403          *
 404          * Note that this can only happen if the hardware or firmware can
 405          * actually add STAs to the filter list, if this is done by the
 406          * driver in response to set_tim() (which will only reduce the race
 407          * this whole filtering tries to solve, not completely solve it)
 408          * this situation cannot happen.
 409          *
 410          * To completely solve this race drivers need to make sure that they
 411          *  (a) don't mix the irq-safe/not irq-safe TX status/RX processing
 412          *      functions and
 413          *  (b) always process RX events before TX status events if ordering
 414          *      can be unknown, for example with different interrupt status
 415          *      bits.
 416          */
 417         if (test_sta_flags(sta, WLAN_STA_PS) &&
 418             skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
 419                 skb_queue_tail(&sta->tx_filtered, skb);
 420                 return;
 421         }
 422
 423         if (!test_sta_flags(sta, WLAN_STA_PS) &&
 424             !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
 425                 /* Software retry the packet once */
 426                 info->flags |= IEEE80211_TX_INTFL_RETRIED;
 427                 ieee80211_add_pending_skb(local, skb);
 428                 return;
 429         }
 430
 431 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 432         if (net_ratelimit())
 433                 printk(KERN_DEBUG "%s: dropped TX filtered frame, "
 434                        "queue_len=%d PS=%d @%lu\n",
 435                        wiphy_name(local->hw.wiphy),
 436                        skb_queue_len(&sta->tx_filtered),
 437                        !!test_sta_flags(sta, WLAN_STA_PS), jiffies);
 438 #endif
 439         dev_kfree_skb(skb);
 440 }
 441
 442 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 443 {
 444         struct sk_buff *skb2;
 445         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 446         struct ieee80211_local *local = hw_to_local(hw);
 447         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 448         u16 frag, type;
 449         __le16 fc;
 450         struct ieee80211_supported_band *sband;
 451         struct ieee80211_tx_status_rtap_hdr *rthdr;
 452         struct ieee80211_sub_if_data *sdata;
 453         struct net_device *prev_dev = NULL;
 454         struct sta_info *sta;
 455         int retry_count = -1, i;
 456
 457         for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
 458                 /* the HW cannot have attempted that rate */
 459                 if (i >= hw->max_rates) {
 460                         info->status.rates[i].idx = -1;
 461                         info->status.rates[i].count = 0;
 462                 }
 463
 464                 retry_count += info->status.rates[i].count;
 465         }
 466         if (retry_count < 0)
 467                 retry_count = 0;
 468
 469         rcu_read_lock();
 470
 471         sband = local->hw.wiphy->bands[info->band];
 472
 473         sta = sta_info_get(local, hdr->addr1);
 474
 475         if (sta) {
 476                 if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
 477                     test_sta_flags(sta, WLAN_STA_PS)) {
 478                         /*
 479                          * The STA is in power save mode, so assume
 480                          * that this TX packet failed because of that.
 481                          */
 482                         ieee80211_handle_filtered_frame(local, sta, skb);
 483                         rcu_read_unlock();
 484                         return;
 485                 }
 486
 487                 fc = hdr->frame_control;
 488
 489                 if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
 490                     (ieee80211_is_data_qos(fc))) {
 491                         u16 tid, ssn;
 492                         u8 *qc;
 493
 494                         qc = ieee80211_get_qos_ctl(hdr);
 495                         tid = qc[0] & 0xf;
 496                         ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
 497                                                 & IEEE80211_SCTL_SEQ);
 498                         ieee80211_send_bar(sta->sdata, hdr->addr1,
 499                                            tid, ssn);
 500                 }
 501
 502                 if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
 503                         ieee80211_handle_filtered_frame(local, sta, skb);
 504                         rcu_read_unlock();
 505                         return;
 506                 } else {
 507                         if (!(info->flags & IEEE80211_TX_STAT_ACK))
 508                                 sta->tx_retry_failed++;
 509                         sta->tx_retry_count += retry_count;
 510                 }
 511
 512                 rate_control_tx_status(local, sband, sta, skb);
 513         }
 514
 515         rcu_read_unlock();
 516
 517         ieee80211_led_tx(local, 0);
 518
 519         /* SNMP counters
 520          * Fragments are passed to low-level drivers as separate skbs, so these
 521          * are actually fragments, not frames. Update frame counters only for
 522          * the first fragment of the frame. */
 523
 524         frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
 525         type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
 526
 527         if (info->flags & IEEE80211_TX_STAT_ACK) {
 528                 if (frag == 0) {
 529                         local->dot11TransmittedFrameCount++;
 530                         if (is_multicast_ether_addr(hdr->addr1))
 531                                 local->dot11MulticastTransmittedFrameCount++;
 532                         if (retry_count > 0)
 533                                 local->dot11RetryCount++;
 534                         if (retry_count > 1)
 535                                 local->dot11MultipleRetryCount++;
 536                 }
 537
 538                 /* This counter shall be incremented for an acknowledged MPDU
 539                  * with an individual address in the address 1 field or an MPDU
 540                  * with a multicast address in the address 1 field of type Data
 541                  * or Management. */
 542                 if (!is_multicast_ether_addr(hdr->addr1) ||
 543                     type == IEEE80211_FTYPE_DATA ||
 544                     type == IEEE80211_FTYPE_MGMT)
 545                         local->dot11TransmittedFragmentCount++;
 546         } else {
 547                 if (frag == 0)
 548                         local->dot11FailedCount++;
 549         }
 550
 551         /* this was a transmitted frame, but now we want to reuse it */
 552         skb_orphan(skb);
 553
 554         /*
 555          * This is a bit racy but we can avoid a lot of work
 556          * with this test...
 557          */
 558         if (!local->monitors && !local->cooked_mntrs) {
 559                 dev_kfree_skb(skb);
 560                 return;
 561         }
 562
 563         /* send frame to monitor interfaces now */
 564
 565         if (skb_headroom(skb) < sizeof(*rthdr)) {
 566                 printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
 567                 dev_kfree_skb(skb);
 568                 return;
 569         }
 570
 571         rthdr = (struct ieee80211_tx_status_rtap_hdr *)
 572                                 skb_push(skb, sizeof(*rthdr));
 573
 574         memset(rthdr, 0, sizeof(*rthdr));
 575         rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
 576         rthdr->hdr.it_present =
 577                 cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
 578                             (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
 579                             (1 << IEEE80211_RADIOTAP_RATE));
 580
 581         if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
 582             !is_multicast_ether_addr(hdr->addr1))
 583                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
 584
 585         /*
 586          * XXX: Once radiotap gets the bitmap reset thing the vendor
 587          *      extensions proposal contains, we can actually report
 588          *      the whole set of tries we did.
 589          */
 590         if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
 591             (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
 592                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
 593         else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
 594                 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
 595         if (info->status.rates[0].idx >= 0 &&
 596             !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
 597                 rthdr->rate = sband->bitrates[
 598                                 info->status.rates[0].idx].bitrate / 5;
 599
 600         /* for now report the total retry_count */
 601         rthdr->data_retries = retry_count;
 602
 603         /* XXX: is this sufficient for BPF? */
 604         skb_set_mac_header(skb, 0);
 605         skb->ip_summed = CHECKSUM_UNNECESSARY;
 606         skb->pkt_type = PACKET_OTHERHOST;
 607         skb->protocol = htons(ETH_P_802_2);
 608         memset(skb->cb, 0, sizeof(skb->cb));
 609
 610         rcu_read_lock();
 611         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 612                 if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
 613                         if (!netif_running(sdata->dev))
 614                                 continue;
 615
 616                         if (prev_dev) {
 617                                 skb2 = skb_clone(skb, GFP_ATOMIC);
 618                                 if (skb2) {
 619                                         skb2->dev = prev_dev;
 620                                         netif_rx(skb2);
 621                                 }
 622                         }
 623
 624                         prev_dev = sdata->dev;
 625                 }
 626         }
 627         if (prev_dev) {
 628                 skb->dev = prev_dev;
 629                 netif_rx(skb);
 630                 skb = NULL;
 631         }
 632         rcu_read_unlock();
 633         dev_kfree_skb(skb);
 634 }
 635 EXPORT_SYMBOL(ieee80211_tx_status);
 636
 637 static void ieee80211_restart_work(struct work_struct *work)
 638 {
 639         struct ieee80211_local *local =
 640                 container_of(work, struct ieee80211_local, restart_work);
 641
 642         rtnl_lock();
 643         ieee80211_reconfig(local);
 644         rtnl_unlock();
 645 }
 646
 647 void ieee80211_restart_hw(struct ieee80211_hw *hw)
 648 {
 649         struct ieee80211_local *local = hw_to_local(hw);
 650
 651         /* use this reason, __ieee80211_resume will unblock it */
 652         ieee80211_stop_queues_by_reason(hw,
 653                 IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 654
 655         schedule_work(&local->restart_work);
 656 }
 657 EXPORT_SYMBOL(ieee80211_restart_hw);
 658
 659 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 660                                         const struct ieee80211_ops *ops)
 661 {
 662         struct ieee80211_local *local;
 663         int priv_size, i;
 664         struct wiphy *wiphy;
 665
 666         /* Ensure 32-byte alignment of our private data and hw private data.
 667          * We use the wiphy priv data for both our ieee80211_local and for
 668          * the driver's private data
 669          *
 670          * In memory it'll be like this:
 671          *
 672          * +-------------------------+
 673          * | struct wiphy           |
 674          * +-------------------------+
 675          * | struct ieee80211_local  |
 676          * +-------------------------+
 677          * | driver's private data   |
 678          * +-------------------------+
 679          *
 680          */
 681         priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
 682
 683         wiphy = wiphy_new(&mac80211_config_ops, priv_size);
 684
 685         if (!wiphy)
 686                 return NULL;
 687
 688         wiphy->privid = mac80211_wiphy_privid;
 689
 690         /* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
 691         wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
 692                                sizeof(struct cfg80211_bss);
 693
 694         local = wiphy_priv(wiphy);
 695
 696         local->hw.wiphy = wiphy;
 697
 698         local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
 699
 700         BUG_ON(!ops->tx);
 701         BUG_ON(!ops->start);
 702         BUG_ON(!ops->stop);
 703         BUG_ON(!ops->config);
 704         BUG_ON(!ops->add_interface);
 705         BUG_ON(!ops->remove_interface);
 706         BUG_ON(!ops->configure_filter);
 707         local->ops = ops;
 708
 709         /* set up some defaults */
 710         local->hw.queues = 1;
 711         local->hw.max_rates = 1;
 712         local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
 713         local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
 714         local->hw.conf.radio_enabled = true;
 715         local->user_power_level = -1;
 716
 717         INIT_LIST_HEAD(&local->interfaces);
 718         mutex_init(&local->iflist_mtx);
 719         mutex_init(&local->scan_mtx);
 720
 721         spin_lock_init(&local->key_lock);
 722
 723         spin_lock_init(&local->queue_stop_reason_lock);
 724
 725         INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 726
 727         INIT_WORK(&local->restart_work, ieee80211_restart_work);
 728
 729         INIT_WORK(&local->dynamic_ps_enable_work,
 730                   ieee80211_dynamic_ps_enable_work);
 731         INIT_WORK(&local->dynamic_ps_disable_work,
 732                   ieee80211_dynamic_ps_disable_work);
 733         setup_timer(&local->dynamic_ps_timer,
 734                     ieee80211_dynamic_ps_timer, (unsigned long) local);
 735
 736         sta_info_init(local);
 737
 738         for (i = 0; i < IEEE80211_MAX_QUEUES; i++)
 739                 skb_queue_head_init(&local->pending[i]);
 740         tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
 741                      (unsigned long)local);
 742         tasklet_disable(&local->tx_pending_tasklet);
 743
 744         tasklet_init(&local->tasklet,
 745                      ieee80211_tasklet_handler,
 746                      (unsigned long) local);
 747         tasklet_disable(&local->tasklet);
 748
 749         skb_queue_head_init(&local->skb_queue);
 750         skb_queue_head_init(&local->skb_queue_unreliable);
 751
 752         spin_lock_init(&local->ampdu_lock);
 753
 754         return local_to_hw(local);
 755 }
 756 EXPORT_SYMBOL(ieee80211_alloc_hw);
 757
 758 static const struct net_device_ops ieee80211_master_ops = {
 759         .ndo_start_xmit = ieee80211_master_start_xmit,
 760         .ndo_open = ieee80211_master_open,
 761         .ndo_stop = ieee80211_master_stop,
 762         .ndo_set_multicast_list = ieee80211_master_set_multicast_list,
 763         .ndo_select_queue = ieee80211_select_queue,
 764 };
 765
 766 static void ieee80211_master_setup(struct net_device *mdev)
 767 {
 768         mdev->type = ARPHRD_IEEE80211;
 769         mdev->netdev_ops = &ieee80211_master_ops;
 770         mdev->header_ops = &ieee80211_header_ops;
 771         mdev->tx_queue_len = 1000;
 772         mdev->addr_len = ETH_ALEN;
 773 }
 774
 775 int ieee80211_register_hw(struct ieee80211_hw *hw)
 776 {
 777         struct ieee80211_local *local = hw_to_local(hw);
 778         int result;
 779         enum ieee80211_band band;
 780         struct net_device *mdev;
 781         struct ieee80211_master_priv *mpriv;
 782         int channels, i, j, max_bitrates;
 783         bool supp_ht;
 784         static const u32 cipher_suites[] = {
 785                 WLAN_CIPHER_SUITE_WEP40,
 786                 WLAN_CIPHER_SUITE_WEP104,
 787                 WLAN_CIPHER_SUITE_TKIP,
 788                 WLAN_CIPHER_SUITE_CCMP,
 789
 790                 /* keep last -- depends on hw flags! */
 791                 WLAN_CIPHER_SUITE_AES_CMAC
 792         };
 793
 794         /*
 795          * generic code guarantees at least one band,
 796          * set this very early because much code assumes
 797          * that hw.conf.channel is assigned
 798          */
 799         channels = 0;
 800         max_bitrates = 0;
 801         supp_ht = false;
 802         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 803                 struct ieee80211_supported_band *sband;
 804
 805                 sband = local->hw.wiphy->bands[band];
 806                 if (!sband)
 807                         continue;
 808                 if (!local->oper_channel) {
 809                         /* init channel we're on */
 810                         local->hw.conf.channel =
 811                         local->oper_channel = &sband->channels[0];
 812                         local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
 813                 }
 814                 channels += sband->n_channels;
 815
 816                 if (max_bitrates < sband->n_bitrates)
 817                         max_bitrates = sband->n_bitrates;
 818                 supp_ht = supp_ht || sband->ht_cap.ht_supported;
 819         }
 820
 821         local->int_scan_req.n_channels = channels;
 822         local->int_scan_req.channels = kzalloc(sizeof(void *) * channels, GFP_KERNEL);
 823         if (!local->int_scan_req.channels)
 824                 return -ENOMEM;
 825
 826         /* if low-level driver supports AP, we also support VLAN */
 827         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
 828                 local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
 829
 830         /* mac80211 always supports monitor */
 831         local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
 832
 833         if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
 834                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 835         else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 836                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 837
 838         /*
 839          * Calculate scan IE length -- we need this to alloc
 840          * memory and to subtract from the driver limit. It
 841          * includes the (extended) supported rates and HT
 842          * information -- SSID is the driver's responsibility.
 843          */
 844         local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
 845         if (supp_ht)
 846                 local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
 847
 848         if (!local->ops->hw_scan) {
 849                 /* For hw_scan, driver needs to set these up. */
 850                 local->hw.wiphy->max_scan_ssids = 4;
 851                 local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 852         }
 853
 854         /*
 855          * If the driver supports any scan IEs, then assume the
 856          * limit includes the IEs mac80211 will add, otherwise
 857          * leave it at zero and let the driver sort it out; we
 858          * still pass our IEs to the driver but userspace will
 859          * not be allowed to in that case.
 860          */
 861         if (local->hw.wiphy->max_scan_ie_len)
 862                 local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
 863
 864         local->hw.wiphy->cipher_suites = cipher_suites;
 865         local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 866         if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
 867                 local->hw.wiphy->n_cipher_suites--;
 868
 869         result = wiphy_register(local->hw.wiphy);
 870         if (result < 0)
 871                 goto fail_wiphy_register;
 872
 873         /*
 874          * We use the number of queues for feature tests (QoS, HT) internally
 875          * so restrict them appropriately.
 876          */
 877         if (hw->queues > IEEE80211_MAX_QUEUES)
 878                 hw->queues = IEEE80211_MAX_QUEUES;
 879
 880         mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
 881                                "wmaster%d", ieee80211_master_setup,
 882                                hw->queues);
 883         if (!mdev)
 884                 goto fail_mdev_alloc;
 885
 886         mpriv = netdev_priv(mdev);
 887         mpriv->local = local;
 888         local->mdev = mdev;
 889
 890         local->hw.workqueue =
 891                 create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
 892         if (!local->hw.workqueue) {
 893                 result = -ENOMEM;
 894                 goto fail_workqueue;
 895         }
 896
 897         /*
 898          * The hardware needs headroom for sending the frame,
 899          * and we need some headroom for passing the frame to monitor
 900          * interfaces, but never both at the same time.
 901          */
 902         local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
 903                                    sizeof(struct ieee80211_tx_status_rtap_hdr));
 904
 905         debugfs_hw_add(local);
 906
 907         if (local->hw.max_listen_interval == 0)
 908                 local->hw.max_listen_interval = 1;
 909
 910         local->hw.conf.listen_interval = local->hw.max_listen_interval;
 911
 912         result = sta_info_start(local);
 913         if (result < 0)
 914                 goto fail_sta_info;
 915
 916         result = ieee80211_wep_init(local);
 917         if (result < 0) {
 918                 printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
 919                        wiphy_name(local->hw.wiphy), result);
 920                 goto fail_wep;
 921         }
 922
 923         rtnl_lock();
 924         result = dev_alloc_name(local->mdev, local->mdev->name);
 925         if (result < 0)
 926                 goto fail_dev;
 927
 928         memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
 929         SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
 930         local->mdev->features |= NETIF_F_NETNS_LOCAL;
 931
 932         result = register_netdevice(local->mdev);
 933         if (result < 0)
 934                 goto fail_dev;
 935
 936         result = ieee80211_init_rate_ctrl_alg(local,
 937                                               hw->rate_control_algorithm);
 938         if (result < 0) {
 939                 printk(KERN_DEBUG "%s: Failed to initialize rate control "
 940                        "algorithm\n", wiphy_name(local->hw.wiphy));
 941                 goto fail_rate;
 942         }
 943
 944         /* add one default STA interface if supported */
 945         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
 946                 result = ieee80211_if_add(local, "wlan%d", NULL,
 947                                           NL80211_IFTYPE_STATION, NULL);
 948                 if (result)
 949                         printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
 950                                wiphy_name(local->hw.wiphy));
 951         }
 952
 953         rtnl_unlock();
 954
 955         ieee80211_led_init(local);
 956
 957         /* alloc internal scan request */
 958         i = 0;
 959         local->int_scan_req.ssids = &local->scan_ssid;
 960         local->int_scan_req.n_ssids = 1;
 961         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 962                 if (!hw->wiphy->bands[band])
 963                         continue;
 964                 for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) {
 965                         local->int_scan_req.channels[i] =
 966                                 &hw->wiphy->bands[band]->channels[j];
 967                         i++;
 968                 }
 969         }
 970
 971         local->network_latency_notifier.notifier_call =
 972                 ieee80211_max_network_latency;
 973         result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
 974                                      &local->network_latency_notifier);
 975
 976         if (result) {
 977                 rtnl_lock();
 978                 goto fail_pm_qos;
 979         }
 980
 981         return 0;
 982
 983  fail_pm_qos:
 984         ieee80211_led_exit(local);
 985         ieee80211_remove_interfaces(local);
 986  fail_rate:
 987         unregister_netdevice(local->mdev);
 988         local->mdev = NULL;
 989  fail_dev:
 990         rtnl_unlock();
 991         ieee80211_wep_free(local);
 992  fail_wep:
 993         sta_info_stop(local);
 994  fail_sta_info:
 995         debugfs_hw_del(local);
 996         destroy_workqueue(local->hw.workqueue);
 997  fail_workqueue:
 998         if (local->mdev)
 999                 free_netdev(local->mdev);
1000  fail_mdev_alloc:
1001         wiphy_unregister(local->hw.wiphy);
1002  fail_wiphy_register:
1003         kfree(local->int_scan_req.channels);
1004         return result;
1005 }
1006 EXPORT_SYMBOL(ieee80211_register_hw);
1007
1008 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1009 {
1010         struct ieee80211_local *local = hw_to_local(hw);
1011
1012         tasklet_kill(&local->tx_pending_tasklet);
1013         tasklet_kill(&local->tasklet);
1014
1015         pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1016                                &local->network_latency_notifier);
1017
1018         rtnl_lock();
1019
1020         /*
1021          * At this point, interface list manipulations are fine
1022          * because the driver cannot be handing us frames any
1023          * more and the tasklet is killed.
1024          */
1025
1026         /* First, we remove all virtual interfaces. */
1027         ieee80211_remove_interfaces(local);
1028
1029         /* then, finally, remove the master interface */
1030         unregister_netdevice(local->mdev);
1031
1032         rtnl_unlock();
1033
1034         ieee80211_clear_tx_pending(local);
1035         sta_info_stop(local);
1036         rate_control_deinitialize(local);
1037         debugfs_hw_del(local);
1038
1039         if (skb_queue_len(&local->skb_queue)
1040                         || skb_queue_len(&local->skb_queue_unreliable))
1041                 printk(KERN_WARNING "%s: skb_queue not empty\n",
1042                        wiphy_name(local->hw.wiphy));
1043         skb_queue_purge(&local->skb_queue);
1044         skb_queue_purge(&local->skb_queue_unreliable);
1045
1046         destroy_workqueue(local->hw.workqueue);
1047         wiphy_unregister(local->hw.wiphy);
1048         ieee80211_wep_free(local);
1049         ieee80211_led_exit(local);
1050         free_netdev(local->mdev);
1051         kfree(local->int_scan_req.channels);
1052 }
1053 EXPORT_SYMBOL(ieee80211_unregister_hw);
1054
1055 void ieee80211_free_hw(struct ieee80211_hw *hw)
1056 {
1057         struct ieee80211_local *local = hw_to_local(hw);
1058
1059         mutex_destroy(&local->iflist_mtx);
1060         mutex_destroy(&local->scan_mtx);
1061
1062         wiphy_free(local->hw.wiphy);
1063 }
1064 EXPORT_SYMBOL(ieee80211_free_hw);
1065
1066 static int __init ieee80211_init(void)
1067 {
1068         struct sk_buff *skb;
1069         int ret;
1070
1071         BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1072         BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1073                      IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1074
1075         ret = rc80211_minstrel_init();
1076         if (ret)
1077                 return ret;
1078
1079         ret = rc80211_pid_init();
1080         if (ret)
1081                 return ret;
1082
1083         ieee80211_debugfs_netdev_init();
1084
1085         return 0;
1086 }
1087
1088 static void __exit ieee80211_exit(void)
1089 {
1090         rc80211_pid_exit();
1091         rc80211_minstrel_exit();
1092
1093         /*
1094          * For key todo, it'll be empty by now but the work
1095          * might still be scheduled.
1096          */
1097         flush_scheduled_work();
1098
1099         if (mesh_allocated)
1100                 ieee80211s_stop();
1101
1102         ieee80211_debugfs_netdev_exit();
1103 }
1104
1105
1106 subsys_initcall(ieee80211_init);
1107 module_exit(ieee80211_exit);
1108
1109 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1110 MODULE_LICENSE("GPL");