[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph
[safe/jmp/linux-2.6] / net / ipv4 / arp.c
1 /* linux/net/ipv4/arp.c
2  *
3  * Version:     $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
4  *
5  * Copyright (C) 1994 by Florian  La Roche
6  *
7  * This module implements the Address Resolution Protocol ARP (RFC 826),
8  * which is used to convert IP addresses (or in the future maybe other
9  * high-level addresses) into a low-level hardware address (like an Ethernet
10  * address).
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License
14  * as published by the Free Software Foundation; either version
15  * 2 of the License, or (at your option) any later version.
16  *
17  * Fixes:
18  *              Alan Cox        :       Removed the Ethernet assumptions in
19  *                                      Florian's code
20  *              Alan Cox        :       Fixed some small errors in the ARP
21  *                                      logic
22  *              Alan Cox        :       Allow >4K in /proc
23  *              Alan Cox        :       Make ARP add its own protocol entry
24  *              Ross Martin     :       Rewrote arp_rcv() and arp_get_info()
25  *              Stephen Henson  :       Add AX25 support to arp_get_info()
26  *              Alan Cox        :       Drop data when a device is downed.
27  *              Alan Cox        :       Use init_timer().
28  *              Alan Cox        :       Double lock fixes.
29  *              Martin Seine    :       Move the arphdr structure
30  *                                      to if_arp.h for compatibility.
31  *                                      with BSD based programs.
32  *              Andrew Tridgell :       Added ARP netmask code and
33  *                                      re-arranged proxy handling.
34  *              Alan Cox        :       Changed to use notifiers.
35  *              Niibe Yutaka    :       Reply for this device or proxies only.
36  *              Alan Cox        :       Don't proxy across hardware types!
37  *              Jonathan Naylor :       Added support for NET/ROM.
38  *              Mike Shaver     :       RFC1122 checks.
39  *              Jonathan Naylor :       Only lookup the hardware address for
40  *                                      the correct hardware type.
41  *              Germano Caronni :       Assorted subtle races.
42  *              Craig Schlenter :       Don't modify permanent entry
43  *                                      during arp_rcv.
44  *              Russ Nelson     :       Tidied up a few bits.
45  *              Alexey Kuznetsov:       Major changes to caching and behaviour,
46  *                                      eg intelligent arp probing and
47  *                                      generation
48  *                                      of host down events.
49  *              Alan Cox        :       Missing unlock in device events.
50  *              Eckes           :       ARP ioctl control errors.
51  *              Alexey Kuznetsov:       Arp free fix.
52  *              Manuel Rodriguez:       Gratuitous ARP.
53  *              Jonathan Layes  :       Added arpd support through kerneld
54  *                                      message queue (960314)
55  *              Mike Shaver     :       /proc/sys/net/ipv4/arp_* support
56  *              Mike McLagan    :       Routing by source
57  *              Stuart Cheshire :       Metricom and grat arp fixes
58  *                                      *** FOR 2.1 clean this up ***
59  *              Lawrence V. Stefani: (08/12/96) Added FDDI support.
60  *              Alan Cox        :       Took the AP1000 nasty FDDI hack and
61  *                                      folded into the mainstream FDDI code.
62  *                                      Ack spit, Linus how did you allow that
63  *                                      one in...
64  *              Jes Sorensen    :       Make FDDI work again in 2.1.x and
65  *                                      clean up the APFDDI & gen. FDDI bits.
66  *              Alexey Kuznetsov:       new arp state machine;
67  *                                      now it is in net/core/neighbour.c.
68  *              Krzysztof Halasa:       Added Frame Relay ARP support.
69  *              Arnaldo C. Melo :       convert /proc/net/arp to seq_file
70  *              Shmulik Hen:            Split arp_send to arp_create and
71  *                                      arp_xmit so intermediate drivers like
72  *                                      bonding can change the skb before
73  *                                      sending (e.g. insert 8021q tag).
74  *              Harald Welte    :       convert to make use of jenkins hash
75  */
76
77 #include <linux/module.h>
78 #include <linux/types.h>
79 #include <linux/string.h>
80 #include <linux/kernel.h>
81 #include <linux/capability.h>
82 #include <linux/socket.h>
83 #include <linux/sockios.h>
84 #include <linux/errno.h>
85 #include <linux/in.h>
86 #include <linux/mm.h>
87 #include <linux/inet.h>
88 #include <linux/inetdevice.h>
89 #include <linux/netdevice.h>
90 #include <linux/etherdevice.h>
91 #include <linux/fddidevice.h>
92 #include <linux/if_arp.h>
93 #include <linux/trdevice.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/jhash.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
105
106 #include <net/ip.h>
107 #include <net/icmp.h>
108 #include <net/route.h>
109 #include <net/protocol.h>
110 #include <net/tcp.h>
111 #include <net/sock.h>
112 #include <net/arp.h>
113 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
114 #include <net/ax25.h>
115 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
116 #include <net/netrom.h>
117 #endif
118 #endif
119 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
120 #include <net/atmclip.h>
121 struct neigh_table *clip_tbl_hook;
122 #endif
123
124 #include <asm/system.h>
125 #include <asm/uaccess.h>
126
127 #include <linux/netfilter_arp.h>
128
129 /*
130  *      Interface to generic neighbour cache.
131  */
132 static u32 arp_hash(const void *pkey, const struct net_device *dev);
133 static int arp_constructor(struct neighbour *neigh);
134 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
135 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
136 static void parp_redo(struct sk_buff *skb);
137
138 static struct neigh_ops arp_generic_ops = {
139         .family =               AF_INET,
140         .solicit =              arp_solicit,
141         .error_report =         arp_error_report,
142         .output =               neigh_resolve_output,
143         .connected_output =     neigh_connected_output,
144         .hh_output =            dev_queue_xmit,
145         .queue_xmit =           dev_queue_xmit,
146 };
147
148 static struct neigh_ops arp_hh_ops = {
149         .family =               AF_INET,
150         .solicit =              arp_solicit,
151         .error_report =         arp_error_report,
152         .output =               neigh_resolve_output,
153         .connected_output =     neigh_resolve_output,
154         .hh_output =            dev_queue_xmit,
155         .queue_xmit =           dev_queue_xmit,
156 };
157
158 static struct neigh_ops arp_direct_ops = {
159         .family =               AF_INET,
160         .output =               dev_queue_xmit,
161         .connected_output =     dev_queue_xmit,
162         .hh_output =            dev_queue_xmit,
163         .queue_xmit =           dev_queue_xmit,
164 };
165
166 struct neigh_ops arp_broken_ops = {
167         .family =               AF_INET,
168         .solicit =              arp_solicit,
169         .error_report =         arp_error_report,
170         .output =               neigh_compat_output,
171         .connected_output =     neigh_compat_output,
172         .hh_output =            dev_queue_xmit,
173         .queue_xmit =           dev_queue_xmit,
174 };
175
176 struct neigh_table arp_tbl = {
177         .family =       AF_INET,
178         .entry_size =   sizeof(struct neighbour) + 4,
179         .key_len =      4,
180         .hash =         arp_hash,
181         .constructor =  arp_constructor,
182         .proxy_redo =   parp_redo,
183         .id =           "arp_cache",
184         .parms = {
185                 .tbl =                  &arp_tbl,
186                 .base_reachable_time =  30 * HZ,
187                 .retrans_time = 1 * HZ,
188                 .gc_staletime = 60 * HZ,
189                 .reachable_time =               30 * HZ,
190                 .delay_probe_time =     5 * HZ,
191                 .queue_len =            3,
192                 .ucast_probes = 3,
193                 .mcast_probes = 3,
194                 .anycast_delay =        1 * HZ,
195                 .proxy_delay =          (8 * HZ) / 10,
196                 .proxy_qlen =           64,
197                 .locktime =             1 * HZ,
198         },
199         .gc_interval =  30 * HZ,
200         .gc_thresh1 =   128,
201         .gc_thresh2 =   512,
202         .gc_thresh3 =   1024,
203 };
204
205 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
206 {
207         switch (dev->type) {
208         case ARPHRD_ETHER:
209         case ARPHRD_FDDI:
210         case ARPHRD_IEEE802:
211                 ip_eth_mc_map(addr, haddr);
212                 return 0;
213         case ARPHRD_IEEE802_TR:
214                 ip_tr_mc_map(addr, haddr);
215                 return 0;
216         case ARPHRD_INFINIBAND:
217                 ip_ib_mc_map(addr, haddr);
218                 return 0;
219         default:
220                 if (dir) {
221                         memcpy(haddr, dev->broadcast, dev->addr_len);
222                         return 0;
223                 }
224         }
225         return -EINVAL;
226 }
227
228
229 static u32 arp_hash(const void *pkey, const struct net_device *dev)
230 {
231         return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
232 }
233
234 static int arp_constructor(struct neighbour *neigh)
235 {
236         __be32 addr = *(__be32*)neigh->primary_key;
237         struct net_device *dev = neigh->dev;
238         struct in_device *in_dev;
239         struct neigh_parms *parms;
240
241         neigh->type = inet_addr_type(addr);
242
243         rcu_read_lock();
244         in_dev = __in_dev_get_rcu(dev);
245         if (in_dev == NULL) {
246                 rcu_read_unlock();
247                 return -EINVAL;
248         }
249
250         parms = in_dev->arp_parms;
251         __neigh_parms_put(neigh->parms);
252         neigh->parms = neigh_parms_clone(parms);
253         rcu_read_unlock();
254
255         if (dev->hard_header == NULL) {
256                 neigh->nud_state = NUD_NOARP;
257                 neigh->ops = &arp_direct_ops;
258                 neigh->output = neigh->ops->queue_xmit;
259         } else {
260                 /* Good devices (checked by reading texts, but only Ethernet is
261                    tested)
262
263                    ARPHRD_ETHER: (ethernet, apfddi)
264                    ARPHRD_FDDI: (fddi)
265                    ARPHRD_IEEE802: (tr)
266                    ARPHRD_METRICOM: (strip)
267                    ARPHRD_ARCNET:
268                    etc. etc. etc.
269
270                    ARPHRD_IPDDP will also work, if author repairs it.
271                    I did not it, because this driver does not work even
272                    in old paradigm.
273                  */
274
275 #if 1
276                 /* So... these "amateur" devices are hopeless.
277                    The only thing, that I can say now:
278                    It is very sad that we need to keep ugly obsolete
279                    code to make them happy.
280
281                    They should be moved to more reasonable state, now
282                    they use rebuild_header INSTEAD OF hard_start_xmit!!!
283                    Besides that, they are sort of out of date
284                    (a lot of redundant clones/copies, useless in 2.1),
285                    I wonder why people believe that they work.
286                  */
287                 switch (dev->type) {
288                 default:
289                         break;
290                 case ARPHRD_ROSE:
291 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
292                 case ARPHRD_AX25:
293 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
294                 case ARPHRD_NETROM:
295 #endif
296                         neigh->ops = &arp_broken_ops;
297                         neigh->output = neigh->ops->output;
298                         return 0;
299 #endif
300                 ;}
301 #endif
302                 if (neigh->type == RTN_MULTICAST) {
303                         neigh->nud_state = NUD_NOARP;
304                         arp_mc_map(addr, neigh->ha, dev, 1);
305                 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
306                         neigh->nud_state = NUD_NOARP;
307                         memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
308                 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
309                         neigh->nud_state = NUD_NOARP;
310                         memcpy(neigh->ha, dev->broadcast, dev->addr_len);
311                 }
312                 if (dev->hard_header_cache)
313                         neigh->ops = &arp_hh_ops;
314                 else
315                         neigh->ops = &arp_generic_ops;
316                 if (neigh->nud_state&NUD_VALID)
317                         neigh->output = neigh->ops->connected_output;
318                 else
319                         neigh->output = neigh->ops->output;
320         }
321         return 0;
322 }
323
324 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
325 {
326         dst_link_failure(skb);
327         kfree_skb(skb);
328 }
329
330 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
331 {
332         __be32 saddr = 0;
333         u8  *dst_ha = NULL;
334         struct net_device *dev = neigh->dev;
335         __be32 target = *(__be32*)neigh->primary_key;
336         int probes = atomic_read(&neigh->probes);
337         struct in_device *in_dev = in_dev_get(dev);
338
339         if (!in_dev)
340                 return;
341
342         switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
343         default:
344         case 0:         /* By default announce any local IP */
345                 if (skb && inet_addr_type(ip_hdr(skb)->saddr) == RTN_LOCAL)
346                         saddr = ip_hdr(skb)->saddr;
347                 break;
348         case 1:         /* Restrict announcements of saddr in same subnet */
349                 if (!skb)
350                         break;
351                 saddr = ip_hdr(skb)->saddr;
352                 if (inet_addr_type(saddr) == RTN_LOCAL) {
353                         /* saddr should be known to target */
354                         if (inet_addr_onlink(in_dev, target, saddr))
355                                 break;
356                 }
357                 saddr = 0;
358                 break;
359         case 2:         /* Avoid secondary IPs, get a primary/preferred one */
360                 break;
361         }
362
363         if (in_dev)
364                 in_dev_put(in_dev);
365         if (!saddr)
366                 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
367
368         if ((probes -= neigh->parms->ucast_probes) < 0) {
369                 if (!(neigh->nud_state&NUD_VALID))
370                         printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
371                 dst_ha = neigh->ha;
372                 read_lock_bh(&neigh->lock);
373         } else if ((probes -= neigh->parms->app_probes) < 0) {
374 #ifdef CONFIG_ARPD
375                 neigh_app_ns(neigh);
376 #endif
377                 return;
378         }
379
380         arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
381                  dst_ha, dev->dev_addr, NULL);
382         if (dst_ha)
383                 read_unlock_bh(&neigh->lock);
384 }
385
386 static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
387                       __be32 sip, __be32 tip)
388 {
389         int scope;
390
391         switch (IN_DEV_ARP_IGNORE(in_dev)) {
392         case 0: /* Reply, the tip is already validated */
393                 return 0;
394         case 1: /* Reply only if tip is configured on the incoming interface */
395                 sip = 0;
396                 scope = RT_SCOPE_HOST;
397                 break;
398         case 2: /*
399                  * Reply only if tip is configured on the incoming interface
400                  * and is in same subnet as sip
401                  */
402                 scope = RT_SCOPE_HOST;
403                 break;
404         case 3: /* Do not reply for scope host addresses */
405                 sip = 0;
406                 scope = RT_SCOPE_LINK;
407                 dev = NULL;
408                 break;
409         case 4: /* Reserved */
410         case 5:
411         case 6:
412         case 7:
413                 return 0;
414         case 8: /* Do not reply */
415                 return 1;
416         default:
417                 return 0;
418         }
419         return !inet_confirm_addr(dev, sip, tip, scope);
420 }
421
422 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
423 {
424         struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
425                                                  .saddr = tip } } };
426         struct rtable *rt;
427         int flag = 0;
428         /*unsigned long now; */
429
430         if (ip_route_output_key(&rt, &fl) < 0)
431                 return 1;
432         if (rt->u.dst.dev != dev) {
433                 NET_INC_STATS_BH(LINUX_MIB_ARPFILTER);
434                 flag = 1;
435         }
436         ip_rt_put(rt);
437         return flag;
438 }
439
440 /* OBSOLETE FUNCTIONS */
441
442 /*
443  *      Find an arp mapping in the cache. If not found, post a request.
444  *
445  *      It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
446  *      even if it exists. It is supposed that skb->dev was mangled
447  *      by a virtual device (eql, shaper). Nobody but broken devices
448  *      is allowed to use this function, it is scheduled to be removed. --ANK
449  */
450
451 static int arp_set_predefined(int addr_hint, unsigned char * haddr, __be32 paddr, struct net_device * dev)
452 {
453         switch (addr_hint) {
454         case RTN_LOCAL:
455                 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
456                 memcpy(haddr, dev->dev_addr, dev->addr_len);
457                 return 1;
458         case RTN_MULTICAST:
459                 arp_mc_map(paddr, haddr, dev, 1);
460                 return 1;
461         case RTN_BROADCAST:
462                 memcpy(haddr, dev->broadcast, dev->addr_len);
463                 return 1;
464         }
465         return 0;
466 }
467
468
469 int arp_find(unsigned char *haddr, struct sk_buff *skb)
470 {
471         struct net_device *dev = skb->dev;
472         __be32 paddr;
473         struct neighbour *n;
474
475         if (!skb->dst) {
476                 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
477                 kfree_skb(skb);
478                 return 1;
479         }
480
481         paddr = ((struct rtable*)skb->dst)->rt_gateway;
482
483         if (arp_set_predefined(inet_addr_type(paddr), haddr, paddr, dev))
484                 return 0;
485
486         n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
487
488         if (n) {
489                 n->used = jiffies;
490                 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
491                         read_lock_bh(&n->lock);
492                         memcpy(haddr, n->ha, dev->addr_len);
493                         read_unlock_bh(&n->lock);
494                         neigh_release(n);
495                         return 0;
496                 }
497                 neigh_release(n);
498         } else
499                 kfree_skb(skb);
500         return 1;
501 }
502
503 /* END OF OBSOLETE FUNCTIONS */
504
505 int arp_bind_neighbour(struct dst_entry *dst)
506 {
507         struct net_device *dev = dst->dev;
508         struct neighbour *n = dst->neighbour;
509
510         if (dev == NULL)
511                 return -EINVAL;
512         if (n == NULL) {
513                 __be32 nexthop = ((struct rtable*)dst)->rt_gateway;
514                 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
515                         nexthop = 0;
516                 n = __neigh_lookup_errno(
517 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
518                     dev->type == ARPHRD_ATM ? clip_tbl_hook :
519 #endif
520                     &arp_tbl, &nexthop, dev);
521                 if (IS_ERR(n))
522                         return PTR_ERR(n);
523                 dst->neighbour = n;
524         }
525         return 0;
526 }
527
528 /*
529  * Check if we can use proxy ARP for this path
530  */
531
532 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
533 {
534         struct in_device *out_dev;
535         int imi, omi = -1;
536
537         if (!IN_DEV_PROXY_ARP(in_dev))
538                 return 0;
539
540         if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
541                 return 1;
542         if (imi == -1)
543                 return 0;
544
545         /* place to check for proxy_arp for routes */
546
547         if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
548                 omi = IN_DEV_MEDIUM_ID(out_dev);
549                 in_dev_put(out_dev);
550         }
551         return (omi != imi && omi != -1);
552 }
553
554 /*
555  *      Interface to link layer: send routine and receive handler.
556  */
557
558 /*
559  *      Create an arp packet. If (dest_hw == NULL), we create a broadcast
560  *      message.
561  */
562 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
563                            struct net_device *dev, __be32 src_ip,
564                            unsigned char *dest_hw, unsigned char *src_hw,
565                            unsigned char *target_hw)
566 {
567         struct sk_buff *skb;
568         struct arphdr *arp;
569         unsigned char *arp_ptr;
570
571         /*
572          *      Allocate a buffer
573          */
574
575         skb = alloc_skb(sizeof(struct arphdr)+ 2*(dev->addr_len+4)
576                                 + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
577         if (skb == NULL)
578                 return NULL;
579
580         skb_reserve(skb, LL_RESERVED_SPACE(dev));
581         skb_reset_network_header(skb);
582         arp = (struct arphdr *) skb_put(skb,sizeof(struct arphdr) + 2*(dev->addr_len+4));
583         skb->dev = dev;
584         skb->protocol = htons(ETH_P_ARP);
585         if (src_hw == NULL)
586                 src_hw = dev->dev_addr;
587         if (dest_hw == NULL)
588                 dest_hw = dev->broadcast;
589
590         /*
591          *      Fill the device header for the ARP frame
592          */
593         if (dev->hard_header &&
594             dev->hard_header(skb,dev,ptype,dest_hw,src_hw,skb->len) < 0)
595                 goto out;
596
597         /*
598          * Fill out the arp protocol part.
599          *
600          * The arp hardware type should match the device type, except for FDDI,
601          * which (according to RFC 1390) should always equal 1 (Ethernet).
602          */
603         /*
604          *      Exceptions everywhere. AX.25 uses the AX.25 PID value not the
605          *      DIX code for the protocol. Make these device structure fields.
606          */
607         switch (dev->type) {
608         default:
609                 arp->ar_hrd = htons(dev->type);
610                 arp->ar_pro = htons(ETH_P_IP);
611                 break;
612
613 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
614         case ARPHRD_AX25:
615                 arp->ar_hrd = htons(ARPHRD_AX25);
616                 arp->ar_pro = htons(AX25_P_IP);
617                 break;
618
619 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
620         case ARPHRD_NETROM:
621                 arp->ar_hrd = htons(ARPHRD_NETROM);
622                 arp->ar_pro = htons(AX25_P_IP);
623                 break;
624 #endif
625 #endif
626
627 #ifdef CONFIG_FDDI
628         case ARPHRD_FDDI:
629                 arp->ar_hrd = htons(ARPHRD_ETHER);
630                 arp->ar_pro = htons(ETH_P_IP);
631                 break;
632 #endif
633 #ifdef CONFIG_TR
634         case ARPHRD_IEEE802_TR:
635                 arp->ar_hrd = htons(ARPHRD_IEEE802);
636                 arp->ar_pro = htons(ETH_P_IP);
637                 break;
638 #endif
639         }
640
641         arp->ar_hln = dev->addr_len;
642         arp->ar_pln = 4;
643         arp->ar_op = htons(type);
644
645         arp_ptr=(unsigned char *)(arp+1);
646
647         memcpy(arp_ptr, src_hw, dev->addr_len);
648         arp_ptr+=dev->addr_len;
649         memcpy(arp_ptr, &src_ip,4);
650         arp_ptr+=4;
651         if (target_hw != NULL)
652                 memcpy(arp_ptr, target_hw, dev->addr_len);
653         else
654                 memset(arp_ptr, 0, dev->addr_len);
655         arp_ptr+=dev->addr_len;
656         memcpy(arp_ptr, &dest_ip, 4);
657
658         return skb;
659
660 out:
661         kfree_skb(skb);
662         return NULL;
663 }
664
665 /*
666  *      Send an arp packet.
667  */
668 void arp_xmit(struct sk_buff *skb)
669 {
670         /* Send it off, maybe filter it using firewalling first.  */
671         NF_HOOK(NF_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
672 }
673
674 /*
675  *      Create and send an arp packet.
676  */
677 void arp_send(int type, int ptype, __be32 dest_ip,
678               struct net_device *dev, __be32 src_ip,
679               unsigned char *dest_hw, unsigned char *src_hw,
680               unsigned char *target_hw)
681 {
682         struct sk_buff *skb;
683
684         /*
685          *      No arp on this interface.
686          */
687
688         if (dev->flags&IFF_NOARP)
689                 return;
690
691         skb = arp_create(type, ptype, dest_ip, dev, src_ip,
692                          dest_hw, src_hw, target_hw);
693         if (skb == NULL) {
694                 return;
695         }
696
697         arp_xmit(skb);
698 }
699
700 /*
701  *      Process an arp request.
702  */
703
704 static int arp_process(struct sk_buff *skb)
705 {
706         struct net_device *dev = skb->dev;
707         struct in_device *in_dev = in_dev_get(dev);
708         struct arphdr *arp;
709         unsigned char *arp_ptr;
710         struct rtable *rt;
711         unsigned char *sha, *tha;
712         __be32 sip, tip;
713         u16 dev_type = dev->type;
714         int addr_type;
715         struct neighbour *n;
716
717         /* arp_rcv below verifies the ARP header and verifies the device
718          * is ARP'able.
719          */
720
721         if (in_dev == NULL)
722                 goto out;
723
724         arp = skb->nh.arph;
725
726         switch (dev_type) {
727         default:
728                 if (arp->ar_pro != htons(ETH_P_IP) ||
729                     htons(dev_type) != arp->ar_hrd)
730                         goto out;
731                 break;
732 #ifdef CONFIG_NET_ETHERNET
733         case ARPHRD_ETHER:
734 #endif
735 #ifdef CONFIG_TR
736         case ARPHRD_IEEE802_TR:
737 #endif
738 #ifdef CONFIG_FDDI
739         case ARPHRD_FDDI:
740 #endif
741 #ifdef CONFIG_NET_FC
742         case ARPHRD_IEEE802:
743 #endif
744 #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
745     defined(CONFIG_FDDI)         || defined(CONFIG_NET_FC)
746                 /*
747                  * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
748                  * devices, according to RFC 2625) devices will accept ARP
749                  * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
750                  * This is the case also of FDDI, where the RFC 1390 says that
751                  * FDDI devices should accept ARP hardware of (1) Ethernet,
752                  * however, to be more robust, we'll accept both 1 (Ethernet)
753                  * or 6 (IEEE 802.2)
754                  */
755                 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
756                      arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
757                     arp->ar_pro != htons(ETH_P_IP))
758                         goto out;
759                 break;
760 #endif
761 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
762         case ARPHRD_AX25:
763                 if (arp->ar_pro != htons(AX25_P_IP) ||
764                     arp->ar_hrd != htons(ARPHRD_AX25))
765                         goto out;
766                 break;
767 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
768         case ARPHRD_NETROM:
769                 if (arp->ar_pro != htons(AX25_P_IP) ||
770                     arp->ar_hrd != htons(ARPHRD_NETROM))
771                         goto out;
772                 break;
773 #endif
774 #endif
775         }
776
777         /* Understand only these message types */
778
779         if (arp->ar_op != htons(ARPOP_REPLY) &&
780             arp->ar_op != htons(ARPOP_REQUEST))
781                 goto out;
782
783 /*
784  *      Extract fields
785  */
786         arp_ptr= (unsigned char *)(arp+1);
787         sha     = arp_ptr;
788         arp_ptr += dev->addr_len;
789         memcpy(&sip, arp_ptr, 4);
790         arp_ptr += 4;
791         tha     = arp_ptr;
792         arp_ptr += dev->addr_len;
793         memcpy(&tip, arp_ptr, 4);
794 /*
795  *      Check for bad requests for 127.x.x.x and requests for multicast
796  *      addresses.  If this is one such, delete it.
797  */
798         if (LOOPBACK(tip) || MULTICAST(tip))
799                 goto out;
800
801 /*
802  *     Special case: We must set Frame Relay source Q.922 address
803  */
804         if (dev_type == ARPHRD_DLCI)
805                 sha = dev->broadcast;
806
807 /*
808  *  Process entry.  The idea here is we want to send a reply if it is a
809  *  request for us or if it is a request for someone else that we hold
810  *  a proxy for.  We want to add an entry to our cache if it is a reply
811  *  to us or if it is a request for our address.
812  *  (The assumption for this last is that if someone is requesting our
813  *  address, they are probably intending to talk to us, so it saves time
814  *  if we cache their address.  Their address is also probably not in
815  *  our cache, since ours is not in their cache.)
816  *
817  *  Putting this another way, we only care about replies if they are to
818  *  us, in which case we add them to the cache.  For requests, we care
819  *  about those for us and those for our proxies.  We reply to both,
820  *  and in the case of requests for us we add the requester to the arp
821  *  cache.
822  */
823
824         /* Special case: IPv4 duplicate address detection packet (RFC2131) */
825         if (sip == 0) {
826                 if (arp->ar_op == htons(ARPOP_REQUEST) &&
827                     inet_addr_type(tip) == RTN_LOCAL &&
828                     !arp_ignore(in_dev,dev,sip,tip))
829                         arp_send(ARPOP_REPLY,ETH_P_ARP,tip,dev,tip,sha,dev->dev_addr,dev->dev_addr);
830                 goto out;
831         }
832
833         if (arp->ar_op == htons(ARPOP_REQUEST) &&
834             ip_route_input(skb, tip, sip, 0, dev) == 0) {
835
836                 rt = (struct rtable*)skb->dst;
837                 addr_type = rt->rt_type;
838
839                 if (addr_type == RTN_LOCAL) {
840                         n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
841                         if (n) {
842                                 int dont_send = 0;
843
844                                 if (!dont_send)
845                                         dont_send |= arp_ignore(in_dev,dev,sip,tip);
846                                 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
847                                         dont_send |= arp_filter(sip,tip,dev);
848                                 if (!dont_send)
849                                         arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
850
851                                 neigh_release(n);
852                         }
853                         goto out;
854                 } else if (IN_DEV_FORWARD(in_dev)) {
855                         if ((rt->rt_flags&RTCF_DNAT) ||
856                             (addr_type == RTN_UNICAST  && rt->u.dst.dev != dev &&
857                              (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, &tip, dev, 0)))) {
858                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
859                                 if (n)
860                                         neigh_release(n);
861
862                                 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
863                                     skb->pkt_type == PACKET_HOST ||
864                                     in_dev->arp_parms->proxy_delay == 0) {
865                                         arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
866                                 } else {
867                                         pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
868                                         in_dev_put(in_dev);
869                                         return 0;
870                                 }
871                                 goto out;
872                         }
873                 }
874         }
875
876         /* Update our ARP tables */
877
878         n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
879
880         if (ipv4_devconf.arp_accept) {
881                 /* Unsolicited ARP is not accepted by default.
882                    It is possible, that this option should be enabled for some
883                    devices (strip is candidate)
884                  */
885                 if (n == NULL &&
886                     arp->ar_op == htons(ARPOP_REPLY) &&
887                     inet_addr_type(sip) == RTN_UNICAST)
888                         n = __neigh_lookup(&arp_tbl, &sip, dev, -1);
889         }
890
891         if (n) {
892                 int state = NUD_REACHABLE;
893                 int override;
894
895                 /* If several different ARP replies follows back-to-back,
896                    use the FIRST one. It is possible, if several proxy
897                    agents are active. Taking the first reply prevents
898                    arp trashing and chooses the fastest router.
899                  */
900                 override = time_after(jiffies, n->updated + n->parms->locktime);
901
902                 /* Broadcast replies and request packets
903                    do not assert neighbour reachability.
904                  */
905                 if (arp->ar_op != htons(ARPOP_REPLY) ||
906                     skb->pkt_type != PACKET_HOST)
907                         state = NUD_STALE;
908                 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
909                 neigh_release(n);
910         }
911
912 out:
913         if (in_dev)
914                 in_dev_put(in_dev);
915         kfree_skb(skb);
916         return 0;
917 }
918
919 static void parp_redo(struct sk_buff *skb)
920 {
921         arp_process(skb);
922 }
923
924
925 /*
926  *      Receive an arp request from the device layer.
927  */
928
929 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
930                    struct packet_type *pt, struct net_device *orig_dev)
931 {
932         struct arphdr *arp;
933
934         /* ARP header, plus 2 device addresses, plus 2 IP addresses.  */
935         if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
936                                  (2 * dev->addr_len) +
937                                  (2 * sizeof(u32)))))
938                 goto freeskb;
939
940         arp = skb->nh.arph;
941         if (arp->ar_hln != dev->addr_len ||
942             dev->flags & IFF_NOARP ||
943             skb->pkt_type == PACKET_OTHERHOST ||
944             skb->pkt_type == PACKET_LOOPBACK ||
945             arp->ar_pln != 4)
946                 goto freeskb;
947
948         if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
949                 goto out_of_mem;
950
951         memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
952
953         return NF_HOOK(NF_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
954
955 freeskb:
956         kfree_skb(skb);
957 out_of_mem:
958         return 0;
959 }
960
961 /*
962  *      User level interface (ioctl)
963  */
964
965 /*
966  *      Set (create) an ARP cache entry.
967  */
968
969 static int arp_req_set(struct arpreq *r, struct net_device * dev)
970 {
971         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
972         struct neighbour *neigh;
973         int err;
974
975         if (r->arp_flags&ATF_PUBL) {
976                 __be32 mask = ((struct sockaddr_in *) &r->arp_netmask)->sin_addr.s_addr;
977                 if (mask && mask != htonl(0xFFFFFFFF))
978                         return -EINVAL;
979                 if (!dev && (r->arp_flags & ATF_COM)) {
980                         dev = dev_getbyhwaddr(r->arp_ha.sa_family, r->arp_ha.sa_data);
981                         if (!dev)
982                                 return -ENODEV;
983                 }
984                 if (mask) {
985                         if (pneigh_lookup(&arp_tbl, &ip, dev, 1) == NULL)
986                                 return -ENOBUFS;
987                         return 0;
988                 }
989                 if (dev == NULL) {
990                         ipv4_devconf.proxy_arp = 1;
991                         return 0;
992                 }
993                 if (__in_dev_get_rtnl(dev)) {
994                         __in_dev_get_rtnl(dev)->cnf.proxy_arp = 1;
995                         return 0;
996                 }
997                 return -ENXIO;
998         }
999
1000         if (r->arp_flags & ATF_PERM)
1001                 r->arp_flags |= ATF_COM;
1002         if (dev == NULL) {
1003                 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1004                                                          .tos = RTO_ONLINK } } };
1005                 struct rtable * rt;
1006                 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1007                         return err;
1008                 dev = rt->u.dst.dev;
1009                 ip_rt_put(rt);
1010                 if (!dev)
1011                         return -EINVAL;
1012         }
1013         switch (dev->type) {
1014 #ifdef CONFIG_FDDI
1015         case ARPHRD_FDDI:
1016                 /*
1017                  * According to RFC 1390, FDDI devices should accept ARP
1018                  * hardware types of 1 (Ethernet).  However, to be more
1019                  * robust, we'll accept hardware types of either 1 (Ethernet)
1020                  * or 6 (IEEE 802.2).
1021                  */
1022                 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1023                     r->arp_ha.sa_family != ARPHRD_ETHER &&
1024                     r->arp_ha.sa_family != ARPHRD_IEEE802)
1025                         return -EINVAL;
1026                 break;
1027 #endif
1028         default:
1029                 if (r->arp_ha.sa_family != dev->type)
1030                         return -EINVAL;
1031                 break;
1032         }
1033
1034         neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1035         err = PTR_ERR(neigh);
1036         if (!IS_ERR(neigh)) {
1037                 unsigned state = NUD_STALE;
1038                 if (r->arp_flags & ATF_PERM)
1039                         state = NUD_PERMANENT;
1040                 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1041                                    r->arp_ha.sa_data : NULL, state,
1042                                    NEIGH_UPDATE_F_OVERRIDE|
1043                                    NEIGH_UPDATE_F_ADMIN);
1044                 neigh_release(neigh);
1045         }
1046         return err;
1047 }
1048
1049 static unsigned arp_state_to_flags(struct neighbour *neigh)
1050 {
1051         unsigned flags = 0;
1052         if (neigh->nud_state&NUD_PERMANENT)
1053                 flags = ATF_PERM|ATF_COM;
1054         else if (neigh->nud_state&NUD_VALID)
1055                 flags = ATF_COM;
1056         return flags;
1057 }
1058
1059 /*
1060  *      Get an ARP cache entry.
1061  */
1062
1063 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1064 {
1065         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1066         struct neighbour *neigh;
1067         int err = -ENXIO;
1068
1069         neigh = neigh_lookup(&arp_tbl, &ip, dev);
1070         if (neigh) {
1071                 read_lock_bh(&neigh->lock);
1072                 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1073                 r->arp_flags = arp_state_to_flags(neigh);
1074                 read_unlock_bh(&neigh->lock);
1075                 r->arp_ha.sa_family = dev->type;
1076                 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1077                 neigh_release(neigh);
1078                 err = 0;
1079         }
1080         return err;
1081 }
1082
1083 static int arp_req_delete(struct arpreq *r, struct net_device * dev)
1084 {
1085         int err;
1086         __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1087         struct neighbour *neigh;
1088
1089         if (r->arp_flags & ATF_PUBL) {
1090                 __be32 mask =
1091                        ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1092                 if (mask == htonl(0xFFFFFFFF))
1093                         return pneigh_delete(&arp_tbl, &ip, dev);
1094                 if (mask == 0) {
1095                         if (dev == NULL) {
1096                                 ipv4_devconf.proxy_arp = 0;
1097                                 return 0;
1098                         }
1099                         if (__in_dev_get_rtnl(dev)) {
1100                                 __in_dev_get_rtnl(dev)->cnf.proxy_arp = 0;
1101                                 return 0;
1102                         }
1103                         return -ENXIO;
1104                 }
1105                 return -EINVAL;
1106         }
1107
1108         if (dev == NULL) {
1109                 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1110                                                          .tos = RTO_ONLINK } } };
1111                 struct rtable * rt;
1112                 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1113                         return err;
1114                 dev = rt->u.dst.dev;
1115                 ip_rt_put(rt);
1116                 if (!dev)
1117                         return -EINVAL;
1118         }
1119         err = -ENXIO;
1120         neigh = neigh_lookup(&arp_tbl, &ip, dev);
1121         if (neigh) {
1122                 if (neigh->nud_state&~NUD_NOARP)
1123                         err = neigh_update(neigh, NULL, NUD_FAILED,
1124                                            NEIGH_UPDATE_F_OVERRIDE|
1125                                            NEIGH_UPDATE_F_ADMIN);
1126                 neigh_release(neigh);
1127         }
1128         return err;
1129 }
1130
1131 /*
1132  *      Handle an ARP layer I/O control request.
1133  */
1134
1135 int arp_ioctl(unsigned int cmd, void __user *arg)
1136 {
1137         int err;
1138         struct arpreq r;
1139         struct net_device *dev = NULL;
1140
1141         switch (cmd) {
1142                 case SIOCDARP:
1143                 case SIOCSARP:
1144                         if (!capable(CAP_NET_ADMIN))
1145                                 return -EPERM;
1146                 case SIOCGARP:
1147                         err = copy_from_user(&r, arg, sizeof(struct arpreq));
1148                         if (err)
1149                                 return -EFAULT;
1150                         break;
1151                 default:
1152                         return -EINVAL;
1153         }
1154
1155         if (r.arp_pa.sa_family != AF_INET)
1156                 return -EPFNOSUPPORT;
1157
1158         if (!(r.arp_flags & ATF_PUBL) &&
1159             (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1160                 return -EINVAL;
1161         if (!(r.arp_flags & ATF_NETMASK))
1162                 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1163                                                            htonl(0xFFFFFFFFUL);
1164         rtnl_lock();
1165         if (r.arp_dev[0]) {
1166                 err = -ENODEV;
1167                 if ((dev = __dev_get_by_name(r.arp_dev)) == NULL)
1168                         goto out;
1169
1170                 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1171                 if (!r.arp_ha.sa_family)
1172                         r.arp_ha.sa_family = dev->type;
1173                 err = -EINVAL;
1174                 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1175                         goto out;
1176         } else if (cmd == SIOCGARP) {
1177                 err = -ENODEV;
1178                 goto out;
1179         }
1180
1181         switch (cmd) {
1182         case SIOCDARP:
1183                 err = arp_req_delete(&r, dev);
1184                 break;
1185         case SIOCSARP:
1186                 err = arp_req_set(&r, dev);
1187                 break;
1188         case SIOCGARP:
1189                 err = arp_req_get(&r, dev);
1190                 if (!err && copy_to_user(arg, &r, sizeof(r)))
1191                         err = -EFAULT;
1192                 break;
1193         }
1194 out:
1195         rtnl_unlock();
1196         return err;
1197 }
1198
1199 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1200 {
1201         struct net_device *dev = ptr;
1202
1203         switch (event) {
1204         case NETDEV_CHANGEADDR:
1205                 neigh_changeaddr(&arp_tbl, dev);
1206                 rt_cache_flush(0);
1207                 break;
1208         default:
1209                 break;
1210         }
1211
1212         return NOTIFY_DONE;
1213 }
1214
1215 static struct notifier_block arp_netdev_notifier = {
1216         .notifier_call = arp_netdev_event,
1217 };
1218
1219 /* Note, that it is not on notifier chain.
1220    It is necessary, that this routine was called after route cache will be
1221    flushed.
1222  */
1223 void arp_ifdown(struct net_device *dev)
1224 {
1225         neigh_ifdown(&arp_tbl, dev);
1226 }
1227
1228
1229 /*
1230  *      Called once on startup.
1231  */
1232
1233 static struct packet_type arp_packet_type = {
1234         .type = __constant_htons(ETH_P_ARP),
1235         .func = arp_rcv,
1236 };
1237
1238 static int arp_proc_init(void);
1239
1240 void __init arp_init(void)
1241 {
1242         neigh_table_init(&arp_tbl);
1243
1244         dev_add_pack(&arp_packet_type);
1245         arp_proc_init();
1246 #ifdef CONFIG_SYSCTL
1247         neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1248                               NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1249 #endif
1250         register_netdevice_notifier(&arp_netdev_notifier);
1251 }
1252
1253 #ifdef CONFIG_PROC_FS
1254 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1255
1256 /* ------------------------------------------------------------------------ */
1257 /*
1258  *      ax25 -> ASCII conversion
1259  */
1260 static char *ax2asc2(ax25_address *a, char *buf)
1261 {
1262         char c, *s;
1263         int n;
1264
1265         for (n = 0, s = buf; n < 6; n++) {
1266                 c = (a->ax25_call[n] >> 1) & 0x7F;
1267
1268                 if (c != ' ') *s++ = c;
1269         }
1270
1271         *s++ = '-';
1272
1273         if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1274                 *s++ = '1';
1275                 n -= 10;
1276         }
1277
1278         *s++ = n + '0';
1279         *s++ = '\0';
1280
1281         if (*buf == '\0' || *buf == '-')
1282            return "*";
1283
1284         return buf;
1285
1286 }
1287 #endif /* CONFIG_AX25 */
1288
1289 #define HBUFFERLEN 30
1290
1291 static void arp_format_neigh_entry(struct seq_file *seq,
1292                                    struct neighbour *n)
1293 {
1294         char hbuffer[HBUFFERLEN];
1295         const char hexbuf[] = "0123456789ABCDEF";
1296         int k, j;
1297         char tbuf[16];
1298         struct net_device *dev = n->dev;
1299         int hatype = dev->type;
1300
1301         read_lock(&n->lock);
1302         /* Convert hardware address to XX:XX:XX:XX ... form. */
1303 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1304         if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1305                 ax2asc2((ax25_address *)n->ha, hbuffer);
1306         else {
1307 #endif
1308         for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1309                 hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
1310                 hbuffer[k++] = hexbuf[n->ha[j] & 15];
1311                 hbuffer[k++] = ':';
1312         }
1313         hbuffer[--k] = 0;
1314 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1315         }
1316 #endif
1317         sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->primary_key));
1318         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1319                    tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1320         read_unlock(&n->lock);
1321 }
1322
1323 static void arp_format_pneigh_entry(struct seq_file *seq,
1324                                     struct pneigh_entry *n)
1325 {
1326         struct net_device *dev = n->dev;
1327         int hatype = dev ? dev->type : 0;
1328         char tbuf[16];
1329
1330         sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->key));
1331         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1332                    tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1333                    dev ? dev->name : "*");
1334 }
1335
1336 static int arp_seq_show(struct seq_file *seq, void *v)
1337 {
1338         if (v == SEQ_START_TOKEN) {
1339                 seq_puts(seq, "IP address       HW type     Flags       "
1340                               "HW address            Mask     Device\n");
1341         } else {
1342                 struct neigh_seq_state *state = seq->private;
1343
1344                 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1345                         arp_format_pneigh_entry(seq, v);
1346                 else
1347                         arp_format_neigh_entry(seq, v);
1348         }
1349
1350         return 0;
1351 }
1352
1353 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1354 {
1355         /* Don't want to confuse "arp -a" w/ magic entries,
1356          * so we tell the generic iterator to skip NUD_NOARP.
1357          */
1358         return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1359 }
1360
1361 /* ------------------------------------------------------------------------ */
1362
1363 static const struct seq_operations arp_seq_ops = {
1364         .start  = arp_seq_start,
1365         .next   = neigh_seq_next,
1366         .stop   = neigh_seq_stop,
1367         .show   = arp_seq_show,
1368 };
1369
1370 static int arp_seq_open(struct inode *inode, struct file *file)
1371 {
1372         struct seq_file *seq;
1373         int rc = -ENOMEM;
1374         struct neigh_seq_state *s = kzalloc(sizeof(*s), GFP_KERNEL);
1375
1376         if (!s)
1377                 goto out;
1378
1379         rc = seq_open(file, &arp_seq_ops);
1380         if (rc)
1381                 goto out_kfree;
1382
1383         seq          = file->private_data;
1384         seq->private = s;
1385 out:
1386         return rc;
1387 out_kfree:
1388         kfree(s);
1389         goto out;
1390 }
1391
1392 static const struct file_operations arp_seq_fops = {
1393         .owner          = THIS_MODULE,
1394         .open           = arp_seq_open,
1395         .read           = seq_read,
1396         .llseek         = seq_lseek,
1397         .release        = seq_release_private,
1398 };
1399
1400 static int __init arp_proc_init(void)
1401 {
1402         if (!proc_net_fops_create("arp", S_IRUGO, &arp_seq_fops))
1403                 return -ENOMEM;
1404         return 0;
1405 }
1406
1407 #else /* CONFIG_PROC_FS */
1408
1409 static int __init arp_proc_init(void)
1410 {
1411         return 0;
1412 }
1413
1414 #endif /* CONFIG_PROC_FS */
1415
1416 EXPORT_SYMBOL(arp_broken_ops);
1417 EXPORT_SYMBOL(arp_find);
1418 EXPORT_SYMBOL(arp_create);
1419 EXPORT_SYMBOL(arp_xmit);
1420 EXPORT_SYMBOL(arp_send);
1421 EXPORT_SYMBOL(arp_tbl);
1422
1423 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1424 EXPORT_SYMBOL(clip_tbl_hook);
1425 #endif