can: switch to seq_file
[safe/jmp/linux-2.6] / net / can / proc.c
1 /*
2  * proc.c - procfs support for Protocol family CAN core module
3  *
4  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. Neither the name of Volkswagen nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * Alternatively, provided that this notice is retained in full, this
20  * software may be distributed under the terms of the GNU General
21  * Public License ("GPL") version 2, in which case the provisions of the
22  * GPL apply INSTEAD OF those given above.
23  *
24  * The provided data structures and external interfaces from this code
25  * are not restricted to be used by modules with a GPL compatible license.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
38  * DAMAGE.
39  *
40  * Send feedback to <socketcan-users@lists.berlios.de>
41  *
42  */
43
44 #include <linux/module.h>
45 #include <linux/proc_fs.h>
46 #include <linux/list.h>
47 #include <linux/rcupdate.h>
48 #include <linux/can/core.h>
49
50 #include "af_can.h"
51
52 /*
53  * proc filenames for the PF_CAN core
54  */
55
56 #define CAN_PROC_VERSION     "version"
57 #define CAN_PROC_STATS       "stats"
58 #define CAN_PROC_RESET_STATS "reset_stats"
59 #define CAN_PROC_RCVLIST_ALL "rcvlist_all"
60 #define CAN_PROC_RCVLIST_FIL "rcvlist_fil"
61 #define CAN_PROC_RCVLIST_INV "rcvlist_inv"
62 #define CAN_PROC_RCVLIST_SFF "rcvlist_sff"
63 #define CAN_PROC_RCVLIST_EFF "rcvlist_eff"
64 #define CAN_PROC_RCVLIST_ERR "rcvlist_err"
65
66 static struct proc_dir_entry *can_dir;
67 static struct proc_dir_entry *pde_version;
68 static struct proc_dir_entry *pde_stats;
69 static struct proc_dir_entry *pde_reset_stats;
70 static struct proc_dir_entry *pde_rcvlist_all;
71 static struct proc_dir_entry *pde_rcvlist_fil;
72 static struct proc_dir_entry *pde_rcvlist_inv;
73 static struct proc_dir_entry *pde_rcvlist_sff;
74 static struct proc_dir_entry *pde_rcvlist_eff;
75 static struct proc_dir_entry *pde_rcvlist_err;
76
77 static int user_reset;
78
79 static const char rx_list_name[][8] = {
80         [RX_ERR] = "rx_err",
81         [RX_ALL] = "rx_all",
82         [RX_FIL] = "rx_fil",
83         [RX_INV] = "rx_inv",
84         [RX_EFF] = "rx_eff",
85 };
86
87 /*
88  * af_can statistics stuff
89  */
90
91 static void can_init_stats(void)
92 {
93         /*
94          * This memset function is called from a timer context (when
95          * can_stattimer is active which is the default) OR in a process
96          * context (reading the proc_fs when can_stattimer is disabled).
97          */
98         memset(&can_stats, 0, sizeof(can_stats));
99         can_stats.jiffies_init = jiffies;
100
101         can_pstats.stats_reset++;
102
103         if (user_reset) {
104                 user_reset = 0;
105                 can_pstats.user_reset++;
106         }
107 }
108
109 static unsigned long calc_rate(unsigned long oldjif, unsigned long newjif,
110                                unsigned long count)
111 {
112         unsigned long rate;
113
114         if (oldjif == newjif)
115                 return 0;
116
117         /* see can_stat_update() - this should NEVER happen! */
118         if (count > (ULONG_MAX / HZ)) {
119                 printk(KERN_ERR "can: calc_rate: count exceeded! %ld\n",
120                        count);
121                 return 99999999;
122         }
123
124         rate = (count * HZ) / (newjif - oldjif);
125
126         return rate;
127 }
128
129 void can_stat_update(unsigned long data)
130 {
131         unsigned long j = jiffies; /* snapshot */
132
133         /* restart counting in timer context on user request */
134         if (user_reset)
135                 can_init_stats();
136
137         /* restart counting on jiffies overflow */
138         if (j < can_stats.jiffies_init)
139                 can_init_stats();
140
141         /* prevent overflow in calc_rate() */
142         if (can_stats.rx_frames > (ULONG_MAX / HZ))
143                 can_init_stats();
144
145         /* prevent overflow in calc_rate() */
146         if (can_stats.tx_frames > (ULONG_MAX / HZ))
147                 can_init_stats();
148
149         /* matches overflow - very improbable */
150         if (can_stats.matches > (ULONG_MAX / 100))
151                 can_init_stats();
152
153         /* calc total values */
154         if (can_stats.rx_frames)
155                 can_stats.total_rx_match_ratio = (can_stats.matches * 100) /
156                         can_stats.rx_frames;
157
158         can_stats.total_tx_rate = calc_rate(can_stats.jiffies_init, j,
159                                             can_stats.tx_frames);
160         can_stats.total_rx_rate = calc_rate(can_stats.jiffies_init, j,
161                                             can_stats.rx_frames);
162
163         /* calc current values */
164         if (can_stats.rx_frames_delta)
165                 can_stats.current_rx_match_ratio =
166                         (can_stats.matches_delta * 100) /
167                         can_stats.rx_frames_delta;
168
169         can_stats.current_tx_rate = calc_rate(0, HZ, can_stats.tx_frames_delta);
170         can_stats.current_rx_rate = calc_rate(0, HZ, can_stats.rx_frames_delta);
171
172         /* check / update maximum values */
173         if (can_stats.max_tx_rate < can_stats.current_tx_rate)
174                 can_stats.max_tx_rate = can_stats.current_tx_rate;
175
176         if (can_stats.max_rx_rate < can_stats.current_rx_rate)
177                 can_stats.max_rx_rate = can_stats.current_rx_rate;
178
179         if (can_stats.max_rx_match_ratio < can_stats.current_rx_match_ratio)
180                 can_stats.max_rx_match_ratio = can_stats.current_rx_match_ratio;
181
182         /* clear values for 'current rate' calculation */
183         can_stats.tx_frames_delta = 0;
184         can_stats.rx_frames_delta = 0;
185         can_stats.matches_delta   = 0;
186
187         /* restart timer (one second) */
188         mod_timer(&can_stattimer, round_jiffies(jiffies + HZ));
189 }
190
191 /*
192  * proc read functions
193  *
194  * From known use-cases we expect about 10 entries in a receive list to be
195  * printed in the proc_fs. So PAGE_SIZE is definitely enough space here.
196  *
197  */
198
199 static void can_print_rcvlist(struct seq_file *m, struct hlist_head *rx_list,
200                               struct net_device *dev)
201 {
202         struct receiver *r;
203         struct hlist_node *n;
204
205         rcu_read_lock();
206         hlist_for_each_entry_rcu(r, n, rx_list, list) {
207                 char *fmt = (r->can_id & CAN_EFF_FLAG)?
208                         "   %-5s  %08X  %08x  %08x  %08x  %8ld  %s\n" :
209                         "   %-5s     %03X    %08x  %08lx  %08lx  %8ld  %s\n";
210
211                 seq_printf(m, fmt, DNAME(dev), r->can_id, r->mask,
212                                 (unsigned long)r->func, (unsigned long)r->data,
213                                 r->matches, r->ident);
214         }
215         rcu_read_unlock();
216 }
217
218 static void can_print_recv_banner(struct seq_file *m)
219 {
220         /*
221          *                  can1.  00000000  00000000  00000000
222          *                 .......          0  tp20
223          */
224         seq_puts(m, "  device   can_id   can_mask  function"
225                         "  userdata   matches  ident\n");
226 }
227
228 static int can_stats_proc_show(struct seq_file *m, void *v)
229 {
230         seq_putc(m, '\n');
231         seq_printf(m, " %8ld transmitted frames (TXF)\n", can_stats.tx_frames);
232         seq_printf(m, " %8ld received frames (RXF)\n", can_stats.rx_frames);
233         seq_printf(m, " %8ld matched frames (RXMF)\n", can_stats.matches);
234
235         seq_putc(m, '\n');
236
237         if (can_stattimer.function == can_stat_update) {
238                 seq_printf(m, " %8ld %% total match ratio (RXMR)\n",
239                                 can_stats.total_rx_match_ratio);
240
241                 seq_printf(m, " %8ld frames/s total tx rate (TXR)\n",
242                                 can_stats.total_tx_rate);
243                 seq_printf(m, " %8ld frames/s total rx rate (RXR)\n",
244                                 can_stats.total_rx_rate);
245
246                 seq_putc(m, '\n');
247
248                 seq_printf(m, " %8ld %% current match ratio (CRXMR)\n",
249                                 can_stats.current_rx_match_ratio);
250
251                 seq_printf(m, " %8ld frames/s current tx rate (CTXR)\n",
252                                 can_stats.current_tx_rate);
253                 seq_printf(m, " %8ld frames/s current rx rate (CRXR)\n",
254                                 can_stats.current_rx_rate);
255
256                 seq_putc(m, '\n');
257
258                 seq_printf(m, " %8ld %% max match ratio (MRXMR)\n",
259                                 can_stats.max_rx_match_ratio);
260
261                 seq_printf(m, " %8ld frames/s max tx rate (MTXR)\n",
262                                 can_stats.max_tx_rate);
263                 seq_printf(m, " %8ld frames/s max rx rate (MRXR)\n",
264                                 can_stats.max_rx_rate);
265
266                 seq_putc(m, '\n');
267         }
268
269         seq_printf(m, " %8ld current receive list entries (CRCV)\n",
270                         can_pstats.rcv_entries);
271         seq_printf(m, " %8ld maximum receive list entries (MRCV)\n",
272                         can_pstats.rcv_entries_max);
273
274         if (can_pstats.stats_reset)
275                 seq_printf(m, "\n %8ld statistic resets (STR)\n",
276                                 can_pstats.stats_reset);
277
278         if (can_pstats.user_reset)
279                 seq_printf(m, " %8ld user statistic resets (USTR)\n",
280                                 can_pstats.user_reset);
281
282         seq_putc(m, '\n');
283         return 0;
284 }
285
286 static int can_stats_proc_open(struct inode *inode, struct file *file)
287 {
288         return single_open(file, can_stats_proc_show, NULL);
289 }
290
291 static const struct file_operations can_stats_proc_fops = {
292         .owner          = THIS_MODULE,
293         .open           = can_stats_proc_open,
294         .read           = seq_read,
295         .llseek         = seq_lseek,
296         .release        = single_release,
297 };
298
299 static int can_reset_stats_proc_show(struct seq_file *m, void *v)
300 {
301         user_reset = 1;
302
303         if (can_stattimer.function == can_stat_update) {
304                 seq_printf(m, "Scheduled statistic reset #%ld.\n",
305                                 can_pstats.stats_reset + 1);
306
307         } else {
308                 if (can_stats.jiffies_init != jiffies)
309                         can_init_stats();
310
311                 seq_printf(m, "Performed statistic reset #%ld.\n",
312                                 can_pstats.stats_reset);
313         }
314         return 0;
315 }
316
317 static int can_reset_stats_proc_open(struct inode *inode, struct file *file)
318 {
319         return single_open(file, can_reset_stats_proc_show, NULL);
320 }
321
322 static const struct file_operations can_reset_stats_proc_fops = {
323         .owner          = THIS_MODULE,
324         .open           = can_reset_stats_proc_open,
325         .read           = seq_read,
326         .llseek         = seq_lseek,
327         .release        = single_release,
328 };
329
330 static int can_version_proc_show(struct seq_file *m, void *v)
331 {
332         seq_printf(m, "%s\n", CAN_VERSION_STRING);
333         return 0;
334 }
335
336 static int can_version_proc_open(struct inode *inode, struct file *file)
337 {
338         return single_open(file, can_version_proc_show, NULL);
339 }
340
341 static const struct file_operations can_version_proc_fops = {
342         .owner          = THIS_MODULE,
343         .open           = can_version_proc_open,
344         .read           = seq_read,
345         .llseek         = seq_lseek,
346         .release        = single_release,
347 };
348
349 static int can_rcvlist_proc_show(struct seq_file *m, void *v)
350 {
351         /* double cast to prevent GCC warning */
352         int idx = (int)(long)m->private;
353         struct dev_rcv_lists *d;
354         struct hlist_node *n;
355
356         seq_printf(m, "\nreceive list '%s':\n", rx_list_name[idx]);
357
358         rcu_read_lock();
359         hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
360
361                 if (!hlist_empty(&d->rx[idx])) {
362                         can_print_recv_banner(m);
363                         can_print_rcvlist(m, &d->rx[idx], d->dev);
364                 } else
365                         seq_printf(m, "  (%s: no entry)\n", DNAME(d->dev));
366         }
367         rcu_read_unlock();
368
369         seq_putc(m, '\n');
370         return 0;
371 }
372
373 static int can_rcvlist_proc_open(struct inode *inode, struct file *file)
374 {
375         return single_open(file, can_rcvlist_proc_show, PDE(inode)->data);
376 }
377
378 static const struct file_operations can_rcvlist_proc_fops = {
379         .owner          = THIS_MODULE,
380         .open           = can_rcvlist_proc_open,
381         .read           = seq_read,
382         .llseek         = seq_lseek,
383         .release        = single_release,
384 };
385
386 static int can_rcvlist_sff_proc_show(struct seq_file *m, void *v)
387 {
388         struct dev_rcv_lists *d;
389         struct hlist_node *n;
390
391         /* RX_SFF */
392         seq_puts(m, "\nreceive list 'rx_sff':\n");
393
394         rcu_read_lock();
395         hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
396                 int i, all_empty = 1;
397                 /* check wether at least one list is non-empty */
398                 for (i = 0; i < 0x800; i++)
399                         if (!hlist_empty(&d->rx_sff[i])) {
400                                 all_empty = 0;
401                                 break;
402                         }
403
404                 if (!all_empty) {
405                         can_print_recv_banner(m);
406                         for (i = 0; i < 0x800; i++) {
407                                 if (!hlist_empty(&d->rx_sff[i]))
408                                         can_print_rcvlist(m, &d->rx_sff[i],
409                                                           d->dev);
410                         }
411                 } else
412                         seq_printf(m, "  (%s: no entry)\n", DNAME(d->dev));
413         }
414         rcu_read_unlock();
415
416         seq_putc(m, '\n');
417         return 0;
418 }
419
420 static int can_rcvlist_sff_proc_open(struct inode *inode, struct file *file)
421 {
422         return single_open(file, can_rcvlist_sff_proc_show, NULL);
423 }
424
425 static const struct file_operations can_rcvlist_sff_proc_fops = {
426         .owner          = THIS_MODULE,
427         .open           = can_rcvlist_sff_proc_open,
428         .read           = seq_read,
429         .llseek         = seq_lseek,
430         .release        = single_release,
431 };
432
433 /*
434  * proc utility functions
435  */
436
437 static void can_remove_proc_readentry(const char *name)
438 {
439         if (can_dir)
440                 remove_proc_entry(name, can_dir);
441 }
442
443 /*
444  * can_init_proc - create main CAN proc directory and procfs entries
445  */
446 void can_init_proc(void)
447 {
448         /* create /proc/net/can directory */
449         can_dir = proc_mkdir("can", init_net.proc_net);
450
451         if (!can_dir) {
452                 printk(KERN_INFO "can: failed to create /proc/net/can . "
453                        "CONFIG_PROC_FS missing?\n");
454                 return;
455         }
456
457         /* own procfs entries from the AF_CAN core */
458         pde_version     = proc_create(CAN_PROC_VERSION, 0644, can_dir,
459                                       &can_version_proc_fops);
460         pde_stats       = proc_create(CAN_PROC_STATS, 0644, can_dir,
461                                       &can_stats_proc_fops);
462         pde_reset_stats = proc_create(CAN_PROC_RESET_STATS, 0644, can_dir,
463                                       &can_reset_stats_proc_fops);
464         pde_rcvlist_err = proc_create_data(CAN_PROC_RCVLIST_ERR, 0644, can_dir,
465                                            &can_rcvlist_proc_fops, (void *)RX_ERR);
466         pde_rcvlist_all = proc_create_data(CAN_PROC_RCVLIST_ALL, 0644, can_dir,
467                                            &can_rcvlist_proc_fops, (void *)RX_ALL);
468         pde_rcvlist_fil = proc_create_data(CAN_PROC_RCVLIST_FIL, 0644, can_dir,
469                                            &can_rcvlist_proc_fops, (void *)RX_FIL);
470         pde_rcvlist_inv = proc_create_data(CAN_PROC_RCVLIST_INV, 0644, can_dir,
471                                            &can_rcvlist_proc_fops, (void *)RX_INV);
472         pde_rcvlist_eff = proc_create_data(CAN_PROC_RCVLIST_EFF, 0644, can_dir,
473                                            &can_rcvlist_proc_fops, (void *)RX_EFF);
474         pde_rcvlist_sff = proc_create(CAN_PROC_RCVLIST_SFF, 0644, can_dir,
475                                       &can_rcvlist_sff_proc_fops);
476 }
477
478 /*
479  * can_remove_proc - remove procfs entries and main CAN proc directory
480  */
481 void can_remove_proc(void)
482 {
483         if (pde_version)
484                 can_remove_proc_readentry(CAN_PROC_VERSION);
485
486         if (pde_stats)
487                 can_remove_proc_readentry(CAN_PROC_STATS);
488
489         if (pde_reset_stats)
490                 can_remove_proc_readentry(CAN_PROC_RESET_STATS);
491
492         if (pde_rcvlist_err)
493                 can_remove_proc_readentry(CAN_PROC_RCVLIST_ERR);
494
495         if (pde_rcvlist_all)
496                 can_remove_proc_readentry(CAN_PROC_RCVLIST_ALL);
497
498         if (pde_rcvlist_fil)
499                 can_remove_proc_readentry(CAN_PROC_RCVLIST_FIL);
500
501         if (pde_rcvlist_inv)
502                 can_remove_proc_readentry(CAN_PROC_RCVLIST_INV);
503
504         if (pde_rcvlist_eff)
505                 can_remove_proc_readentry(CAN_PROC_RCVLIST_EFF);
506
507         if (pde_rcvlist_sff)
508                 can_remove_proc_readentry(CAN_PROC_RCVLIST_SFF);
509
510         if (can_dir)
511                 proc_net_remove(&init_net, "can");
512 }