SAFE public projects git trees. - safe/jmp/linux-2.6/blob - kernel/sys.c

   1 /*
   2  *  linux/kernel/sys.c
   3  *
   4  *  Copyright (C) 1991, 1992  Linus Torvalds
   5  */
   6
   7 #include <linux/module.h>
   8 #include <linux/mm.h>
   9 #include <linux/utsname.h>
  10 #include <linux/mman.h>
  11 #include <linux/smp_lock.h>
  12 #include <linux/notifier.h>
  13 #include <linux/reboot.h>
  14 #include <linux/prctl.h>
  15 #include <linux/highuid.h>
  16 #include <linux/fs.h>
  17 #include <linux/resource.h>
  18 #include <linux/kernel.h>
  19 #include <linux/kexec.h>
  20 #include <linux/workqueue.h>
  21 #include <linux/capability.h>
  22 #include <linux/device.h>
  23 #include <linux/key.h>
  24 #include <linux/times.h>
  25 #include <linux/posix-timers.h>
  26 #include <linux/security.h>
  27 #include <linux/dcookies.h>
  28 #include <linux/suspend.h>
  29 #include <linux/tty.h>
  30 #include <linux/signal.h>
  31 #include <linux/cn_proc.h>
  32 #include <linux/getcpu.h>
  33 #include <linux/task_io_accounting_ops.h>
  34 #include <linux/seccomp.h>
  35 #include <linux/cpu.h>
  36
  37 #include <linux/compat.h>
  38 #include <linux/syscalls.h>
  39 #include <linux/kprobes.h>
  40 #include <linux/user_namespace.h>
  41
  42 #include <asm/uaccess.h>
  43 #include <asm/io.h>
  44 #include <asm/unistd.h>
  45
  46 #ifndef SET_UNALIGN_CTL
  47 # define SET_UNALIGN_CTL(a,b)   (-EINVAL)
  48 #endif
  49 #ifndef GET_UNALIGN_CTL
  50 # define GET_UNALIGN_CTL(a,b)   (-EINVAL)
  51 #endif
  52 #ifndef SET_FPEMU_CTL
  53 # define SET_FPEMU_CTL(a,b)     (-EINVAL)
  54 #endif
  55 #ifndef GET_FPEMU_CTL
  56 # define GET_FPEMU_CTL(a,b)     (-EINVAL)
  57 #endif
  58 #ifndef SET_FPEXC_CTL
  59 # define SET_FPEXC_CTL(a,b)     (-EINVAL)
  60 #endif
  61 #ifndef GET_FPEXC_CTL
  62 # define GET_FPEXC_CTL(a,b)     (-EINVAL)
  63 #endif
  64 #ifndef GET_ENDIAN
  65 # define GET_ENDIAN(a,b)        (-EINVAL)
  66 #endif
  67 #ifndef SET_ENDIAN
  68 # define SET_ENDIAN(a,b)        (-EINVAL)
  69 #endif
  70 #ifndef GET_TSC_CTL
  71 # define GET_TSC_CTL(a)         (-EINVAL)
  72 #endif
  73 #ifndef SET_TSC_CTL
  74 # define SET_TSC_CTL(a)         (-EINVAL)
  75 #endif
  76
  77 /*
  78  * this is where the system-wide overflow UID and GID are defined, for
  79  * architectures that now have 32-bit UID/GID but didn't in the past
  80  */
  81
  82 int overflowuid = DEFAULT_OVERFLOWUID;
  83 int overflowgid = DEFAULT_OVERFLOWGID;
  84
  85 #ifdef CONFIG_UID16
  86 EXPORT_SYMBOL(overflowuid);
  87 EXPORT_SYMBOL(overflowgid);
  88 #endif
  89
  90 /*
  91  * the same as above, but for filesystems which can only store a 16-bit
  92  * UID and GID. as such, this is needed on all architectures
  93  */
  94
  95 int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
  96 int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
  97
  98 EXPORT_SYMBOL(fs_overflowuid);
  99 EXPORT_SYMBOL(fs_overflowgid);
 100
 101 /*
 102  * this indicates whether you can reboot with ctrl-alt-del: the default is yes
 103  */
 104
 105 int C_A_D = 1;
 106 struct pid *cad_pid;
 107 EXPORT_SYMBOL(cad_pid);
 108
 109 /*
 110  * If set, this is used for preparing the system to power off.
 111  */
 112
 113 void (*pm_power_off_prepare)(void);
 114
 115 static int set_one_prio(struct task_struct *p, int niceval, int error)
 116 {
 117         int no_nice;
 118
 119         if (p->uid != current->euid &&
 120                 p->euid != current->euid && !capable(CAP_SYS_NICE)) {
 121                 error = -EPERM;
 122                 goto out;
 123         }
 124         if (niceval < task_nice(p) && !can_nice(p, niceval)) {
 125                 error = -EACCES;
 126                 goto out;
 127         }
 128         no_nice = security_task_setnice(p, niceval);
 129         if (no_nice) {
 130                 error = no_nice;
 131                 goto out;
 132         }
 133         if (error == -ESRCH)
 134                 error = 0;
 135         set_user_nice(p, niceval);
 136 out:
 137         return error;
 138 }
 139
 140 asmlinkage long sys_setpriority(int which, int who, int niceval)
 141 {
 142         struct task_struct *g, *p;
 143         struct user_struct *user;
 144         int error = -EINVAL;
 145         struct pid *pgrp;
 146
 147         if (which > PRIO_USER || which < PRIO_PROCESS)
 148                 goto out;
 149
 150         /* normalize: avoid signed division (rounding problems) */
 151         error = -ESRCH;
 152         if (niceval < -20)
 153                 niceval = -20;
 154         if (niceval > 19)
 155                 niceval = 19;
 156
 157         read_lock(&tasklist_lock);
 158         switch (which) {
 159                 case PRIO_PROCESS:
 160                         if (who)
 161                                 p = find_task_by_vpid(who);
 162                         else
 163                                 p = current;
 164                         if (p)
 165                                 error = set_one_prio(p, niceval, error);
 166                         break;
 167                 case PRIO_PGRP:
 168                         if (who)
 169                                 pgrp = find_vpid(who);
 170                         else
 171                                 pgrp = task_pgrp(current);
 172                         do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
 173                                 error = set_one_prio(p, niceval, error);
 174                         } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
 175                         break;
 176                 case PRIO_USER:
 177                         user = current->user;
 178                         if (!who)
 179                                 who = current->uid;
 180                         else
 181                                 if ((who != current->uid) && !(user = find_user(who)))
 182                                         goto out_unlock;        /* No processes for this user */
 183
 184                         do_each_thread(g, p)
 185                                 if (p->uid == who)
 186                                         error = set_one_prio(p, niceval, error);
 187                         while_each_thread(g, p);
 188                         if (who != current->uid)
 189                                 free_uid(user);         /* For find_user() */
 190                         break;
 191         }
 192 out_unlock:
 193         read_unlock(&tasklist_lock);
 194 out:
 195         return error;
 196 }
 197
 198 /*
 199  * Ugh. To avoid negative return values, "getpriority()" will
 200  * not return the normal nice-value, but a negated value that
 201  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
 202  * to stay compatible.
 203  */
 204 asmlinkage long sys_getpriority(int which, int who)
 205 {
 206         struct task_struct *g, *p;
 207         struct user_struct *user;
 208         long niceval, retval = -ESRCH;
 209         struct pid *pgrp;
 210
 211         if (which > PRIO_USER || which < PRIO_PROCESS)
 212                 return -EINVAL;
 213
 214         read_lock(&tasklist_lock);
 215         switch (which) {
 216                 case PRIO_PROCESS:
 217                         if (who)
 218                                 p = find_task_by_vpid(who);
 219                         else
 220                                 p = current;
 221                         if (p) {
 222                                 niceval = 20 - task_nice(p);
 223                                 if (niceval > retval)
 224                                         retval = niceval;
 225                         }
 226                         break;
 227                 case PRIO_PGRP:
 228                         if (who)
 229                                 pgrp = find_vpid(who);
 230                         else
 231                                 pgrp = task_pgrp(current);
 232                         do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
 233                                 niceval = 20 - task_nice(p);
 234                                 if (niceval > retval)
 235                                         retval = niceval;
 236                         } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
 237                         break;
 238                 case PRIO_USER:
 239                         user = current->user;
 240                         if (!who)
 241                                 who = current->uid;
 242                         else
 243                                 if ((who != current->uid) && !(user = find_user(who)))
 244                                         goto out_unlock;        /* No processes for this user */
 245
 246                         do_each_thread(g, p)
 247                                 if (p->uid == who) {
 248                                         niceval = 20 - task_nice(p);
 249                                         if (niceval > retval)
 250                                                 retval = niceval;
 251                                 }
 252                         while_each_thread(g, p);
 253                         if (who != current->uid)
 254                                 free_uid(user);         /* for find_user() */
 255                         break;
 256         }
 257 out_unlock:
 258         read_unlock(&tasklist_lock);
 259
 260         return retval;
 261 }
 262
 263 /**
 264  *      emergency_restart - reboot the system
 265  *
 266  *      Without shutting down any hardware or taking any locks
 267  *      reboot the system.  This is called when we know we are in
 268  *      trouble so this is our best effort to reboot.  This is
 269  *      safe to call in interrupt context.
 270  */
 271 void emergency_restart(void)
 272 {
 273         machine_emergency_restart();
 274 }
 275 EXPORT_SYMBOL_GPL(emergency_restart);
 276
 277 static void kernel_restart_prepare(char *cmd)
 278 {
 279         blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
 280         system_state = SYSTEM_RESTART;
 281         device_shutdown();
 282         sysdev_shutdown();
 283 }
 284
 285 /**
 286  *      kernel_restart - reboot the system
 287  *      @cmd: pointer to buffer containing command to execute for restart
 288  *              or %NULL
 289  *
 290  *      Shutdown everything and perform a clean reboot.
 291  *      This is not safe to call in interrupt context.
 292  */
 293 void kernel_restart(char *cmd)
 294 {
 295         kernel_restart_prepare(cmd);
 296         if (!cmd)
 297                 printk(KERN_EMERG "Restarting system.\n");
 298         else
 299                 printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
 300         machine_restart(cmd);
 301 }
 302 EXPORT_SYMBOL_GPL(kernel_restart);
 303
 304 /**
 305  *      kernel_kexec - reboot the system
 306  *
 307  *      Move into place and start executing a preloaded standalone
 308  *      executable.  If nothing was preloaded return an error.
 309  */
 310 static void kernel_kexec(void)
 311 {
 312 #ifdef CONFIG_KEXEC
 313         struct kimage *image;
 314         image = xchg(&kexec_image, NULL);
 315         if (!image)
 316                 return;
 317         kernel_restart_prepare(NULL);
 318         printk(KERN_EMERG "Starting new kernel\n");
 319         machine_shutdown();
 320         machine_kexec(image);
 321 #endif
 322 }
 323
 324 static void kernel_shutdown_prepare(enum system_states state)
 325 {
 326         blocking_notifier_call_chain(&reboot_notifier_list,
 327                 (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
 328         system_state = state;
 329         device_shutdown();
 330 }
 331 /**
 332  *      kernel_halt - halt the system
 333  *
 334  *      Shutdown everything and perform a clean system halt.
 335  */
 336 void kernel_halt(void)
 337 {
 338         kernel_shutdown_prepare(SYSTEM_HALT);
 339         sysdev_shutdown();
 340         printk(KERN_EMERG "System halted.\n");
 341         machine_halt();
 342 }
 343
 344 EXPORT_SYMBOL_GPL(kernel_halt);
 345
 346 /**
 347  *      kernel_power_off - power_off the system
 348  *
 349  *      Shutdown everything and perform a clean system power_off.
 350  */
 351 void kernel_power_off(void)
 352 {
 353         kernel_shutdown_prepare(SYSTEM_POWER_OFF);
 354         if (pm_power_off_prepare)
 355                 pm_power_off_prepare();
 356         disable_nonboot_cpus();
 357         sysdev_shutdown();
 358         printk(KERN_EMERG "Power down.\n");
 359         machine_power_off();
 360 }
 361 EXPORT_SYMBOL_GPL(kernel_power_off);
 362 /*
 363  * Reboot system call: for obvious reasons only root may call it,
 364  * and even root needs to set up some magic numbers in the registers
 365  * so that some mistake won't make this reboot the whole machine.
 366  * You can also set the meaning of the ctrl-alt-del-key here.
 367  *
 368  * reboot doesn't sync: do that yourself before calling this.
 369  */
 370 asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
 371 {
 372         char buffer[256];
 373
 374         /* We only trust the superuser with rebooting the system. */
 375         if (!capable(CAP_SYS_BOOT))
 376                 return -EPERM;
 377
 378         /* For safety, we require "magic" arguments. */
 379         if (magic1 != LINUX_REBOOT_MAGIC1 ||
 380             (magic2 != LINUX_REBOOT_MAGIC2 &&
 381                         magic2 != LINUX_REBOOT_MAGIC2A &&
 382                         magic2 != LINUX_REBOOT_MAGIC2B &&
 383                         magic2 != LINUX_REBOOT_MAGIC2C))
 384                 return -EINVAL;
 385
 386         /* Instead of trying to make the power_off code look like
 387          * halt when pm_power_off is not set do it the easy way.
 388          */
 389         if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
 390                 cmd = LINUX_REBOOT_CMD_HALT;
 391
 392         lock_kernel();
 393         switch (cmd) {
 394         case LINUX_REBOOT_CMD_RESTART:
 395                 kernel_restart(NULL);
 396                 break;
 397
 398         case LINUX_REBOOT_CMD_CAD_ON:
 399                 C_A_D = 1;
 400                 break;
 401
 402         case LINUX_REBOOT_CMD_CAD_OFF:
 403                 C_A_D = 0;
 404                 break;
 405
 406         case LINUX_REBOOT_CMD_HALT:
 407                 kernel_halt();
 408                 unlock_kernel();
 409                 do_exit(0);
 410                 break;
 411
 412         case LINUX_REBOOT_CMD_POWER_OFF:
 413                 kernel_power_off();
 414                 unlock_kernel();
 415                 do_exit(0);
 416                 break;
 417
 418         case LINUX_REBOOT_CMD_RESTART2:
 419                 if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
 420                         unlock_kernel();
 421                         return -EFAULT;
 422                 }
 423                 buffer[sizeof(buffer) - 1] = '\0';
 424
 425                 kernel_restart(buffer);
 426                 break;
 427
 428         case LINUX_REBOOT_CMD_KEXEC:
 429                 kernel_kexec();
 430                 unlock_kernel();
 431                 return -EINVAL;
 432
 433 #ifdef CONFIG_HIBERNATION
 434         case LINUX_REBOOT_CMD_SW_SUSPEND:
 435                 {
 436                         int ret = hibernate();
 437                         unlock_kernel();
 438                         return ret;
 439                 }
 440 #endif
 441
 442         default:
 443                 unlock_kernel();
 444                 return -EINVAL;
 445         }
 446         unlock_kernel();
 447         return 0;
 448 }
 449
 450 static void deferred_cad(struct work_struct *dummy)
 451 {
 452         kernel_restart(NULL);
 453 }
 454
 455 /*
 456  * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
 457  * As it's called within an interrupt, it may NOT sync: the only choice
 458  * is whether to reboot at once, or just ignore the ctrl-alt-del.
 459  */
 460 void ctrl_alt_del(void)
 461 {
 462         static DECLARE_WORK(cad_work, deferred_cad);
 463
 464         if (C_A_D)
 465                 schedule_work(&cad_work);
 466         else
 467                 kill_cad_pid(SIGINT, 1);
 468 }
 469
 470 /*
 471  * Unprivileged users may change the real gid to the effective gid
 472  * or vice versa.  (BSD-style)
 473  *
 474  * If you set the real gid at all, or set the effective gid to a value not
 475  * equal to the real gid, then the saved gid is set to the new effective gid.
 476  *
 477  * This makes it possible for a setgid program to completely drop its
 478  * privileges, which is often a useful assertion to make when you are doing
 479  * a security audit over a program.
 480  *
 481  * The general idea is that a program which uses just setregid() will be
 482  * 100% compatible with BSD.  A program which uses just setgid() will be
 483  * 100% compatible with POSIX with saved IDs.
 484  *
 485  * SMP: There are not races, the GIDs are checked only by filesystem
 486  *      operations (as far as semantic preservation is concerned).
 487  */
 488 asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
 489 {
 490         int old_rgid = current->gid;
 491         int old_egid = current->egid;
 492         int new_rgid = old_rgid;
 493         int new_egid = old_egid;
 494         int retval;
 495
 496         retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE);
 497         if (retval)
 498                 return retval;
 499
 500         if (rgid != (gid_t) -1) {
 501                 if ((old_rgid == rgid) ||
 502                     (current->egid==rgid) ||
 503                     capable(CAP_SETGID))
 504                         new_rgid = rgid;
 505                 else
 506                         return -EPERM;
 507         }
 508         if (egid != (gid_t) -1) {
 509                 if ((old_rgid == egid) ||
 510                     (current->egid == egid) ||
 511                     (current->sgid == egid) ||
 512                     capable(CAP_SETGID))
 513                         new_egid = egid;
 514                 else
 515                         return -EPERM;
 516         }
 517         if (new_egid != old_egid) {
 518                 set_dumpable(current->mm, suid_dumpable);
 519                 smp_wmb();
 520         }
 521         if (rgid != (gid_t) -1 ||
 522             (egid != (gid_t) -1 && egid != old_rgid))
 523                 current->sgid = new_egid;
 524         current->fsgid = new_egid;
 525         current->egid = new_egid;
 526         current->gid = new_rgid;
 527         key_fsgid_changed(current);
 528         proc_id_connector(current, PROC_EVENT_GID);
 529         return 0;
 530 }
 531
 532 /*
 533  * setgid() is implemented like SysV w/ SAVED_IDS
 534  *
 535  * SMP: Same implicit races as above.
 536  */
 537 asmlinkage long sys_setgid(gid_t gid)
 538 {
 539         int old_egid = current->egid;
 540         int retval;
 541
 542         retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID);
 543         if (retval)
 544                 return retval;
 545
 546         if (capable(CAP_SETGID)) {
 547                 if (old_egid != gid) {
 548                         set_dumpable(current->mm, suid_dumpable);
 549                         smp_wmb();
 550                 }
 551                 current->gid = current->egid = current->sgid = current->fsgid = gid;
 552         } else if ((gid == current->gid) || (gid == current->sgid)) {
 553                 if (old_egid != gid) {
 554                         set_dumpable(current->mm, suid_dumpable);
 555                         smp_wmb();
 556                 }
 557                 current->egid = current->fsgid = gid;
 558         }
 559         else
 560                 return -EPERM;
 561
 562         key_fsgid_changed(current);
 563         proc_id_connector(current, PROC_EVENT_GID);
 564         return 0;
 565 }
 566
 567 static int set_user(uid_t new_ruid, int dumpclear)
 568 {
 569         struct user_struct *new_user;
 570
 571         new_user = alloc_uid(current->nsproxy->user_ns, new_ruid);
 572         if (!new_user)
 573                 return -EAGAIN;
 574
 575         if (atomic_read(&new_user->processes) >=
 576                                 current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
 577                         new_user != current->nsproxy->user_ns->root_user) {
 578                 free_uid(new_user);
 579                 return -EAGAIN;
 580         }
 581
 582         switch_uid(new_user);
 583
 584         if (dumpclear) {
 585                 set_dumpable(current->mm, suid_dumpable);
 586                 smp_wmb();
 587         }
 588         current->uid = new_ruid;
 589         return 0;
 590 }
 591
 592 /*
 593  * Unprivileged users may change the real uid to the effective uid
 594  * or vice versa.  (BSD-style)
 595  *
 596  * If you set the real uid at all, or set the effective uid to a value not
 597  * equal to the real uid, then the saved uid is set to the new effective uid.
 598  *
 599  * This makes it possible for a setuid program to completely drop its
 600  * privileges, which is often a useful assertion to make when you are doing
 601  * a security audit over a program.
 602  *
 603  * The general idea is that a program which uses just setreuid() will be
 604  * 100% compatible with BSD.  A program which uses just setuid() will be
 605  * 100% compatible with POSIX with saved IDs.
 606  */
 607 asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
 608 {
 609         int old_ruid, old_euid, old_suid, new_ruid, new_euid;
 610         int retval;
 611
 612         retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE);
 613         if (retval)
 614                 return retval;
 615
 616         new_ruid = old_ruid = current->uid;
 617         new_euid = old_euid = current->euid;
 618         old_suid = current->suid;
 619
 620         if (ruid != (uid_t) -1) {
 621                 new_ruid = ruid;
 622                 if ((old_ruid != ruid) &&
 623                     (current->euid != ruid) &&
 624                     !capable(CAP_SETUID))
 625                         return -EPERM;
 626         }
 627
 628         if (euid != (uid_t) -1) {
 629                 new_euid = euid;
 630                 if ((old_ruid != euid) &&
 631                     (current->euid != euid) &&
 632                     (current->suid != euid) &&
 633                     !capable(CAP_SETUID))
 634                         return -EPERM;
 635         }
 636
 637         if (new_ruid != old_ruid && set_user(new_ruid, new_euid != old_euid) < 0)
 638                 return -EAGAIN;
 639
 640         if (new_euid != old_euid) {
 641                 set_dumpable(current->mm, suid_dumpable);
 642                 smp_wmb();
 643         }
 644         current->fsuid = current->euid = new_euid;
 645         if (ruid != (uid_t) -1 ||
 646             (euid != (uid_t) -1 && euid != old_ruid))
 647                 current->suid = current->euid;
 648         current->fsuid = current->euid;
 649
 650         key_fsuid_changed(current);
 651         proc_id_connector(current, PROC_EVENT_UID);
 652
 653         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RE);
 654 }
 655
 656
 657
 658 /*
 659  * setuid() is implemented like SysV with SAVED_IDS
 660  *
 661  * Note that SAVED_ID's is deficient in that a setuid root program
 662  * like sendmail, for example, cannot set its uid to be a normal
 663  * user and then switch back, because if you're root, setuid() sets
 664  * the saved uid too.  If you don't like this, blame the bright people
 665  * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
 666  * will allow a root program to temporarily drop privileges and be able to
 667  * regain them by swapping the real and effective uid.
 668  */
 669 asmlinkage long sys_setuid(uid_t uid)
 670 {
 671         int old_euid = current->euid;
 672         int old_ruid, old_suid, new_suid;
 673         int retval;
 674
 675         retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID);
 676         if (retval)
 677                 return retval;
 678
 679         old_ruid = current->uid;
 680         old_suid = current->suid;
 681         new_suid = old_suid;
 682
 683         if (capable(CAP_SETUID)) {
 684                 if (uid != old_ruid && set_user(uid, old_euid != uid) < 0)
 685                         return -EAGAIN;
 686                 new_suid = uid;
 687         } else if ((uid != current->uid) && (uid != new_suid))
 688                 return -EPERM;
 689
 690         if (old_euid != uid) {
 691                 set_dumpable(current->mm, suid_dumpable);
 692                 smp_wmb();
 693         }
 694         current->fsuid = current->euid = uid;
 695         current->suid = new_suid;
 696
 697         key_fsuid_changed(current);
 698         proc_id_connector(current, PROC_EVENT_UID);
 699
 700         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_ID);
 701 }
 702
 703
 704 /*
 705  * This function implements a generic ability to update ruid, euid,
 706  * and suid.  This allows you to implement the 4.4 compatible seteuid().
 707  */
 708 asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
 709 {
 710         int old_ruid = current->uid;
 711         int old_euid = current->euid;
 712         int old_suid = current->suid;
 713         int retval;
 714
 715         retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES);
 716         if (retval)
 717                 return retval;
 718
 719         if (!capable(CAP_SETUID)) {
 720                 if ((ruid != (uid_t) -1) && (ruid != current->uid) &&
 721                     (ruid != current->euid) && (ruid != current->suid))
 722                         return -EPERM;
 723                 if ((euid != (uid_t) -1) && (euid != current->uid) &&
 724                     (euid != current->euid) && (euid != current->suid))
 725                         return -EPERM;
 726                 if ((suid != (uid_t) -1) && (suid != current->uid) &&
 727                     (suid != current->euid) && (suid != current->suid))
 728                         return -EPERM;
 729         }
 730         if (ruid != (uid_t) -1) {
 731                 if (ruid != current->uid && set_user(ruid, euid != current->euid) < 0)
 732                         return -EAGAIN;
 733         }
 734         if (euid != (uid_t) -1) {
 735                 if (euid != current->euid) {
 736                         set_dumpable(current->mm, suid_dumpable);
 737                         smp_wmb();
 738                 }
 739                 current->euid = euid;
 740         }
 741         current->fsuid = current->euid;
 742         if (suid != (uid_t) -1)
 743                 current->suid = suid;
 744
 745         key_fsuid_changed(current);
 746         proc_id_connector(current, PROC_EVENT_UID);
 747
 748         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RES);
 749 }
 750
 751 asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
 752 {
 753         int retval;
 754
 755         if (!(retval = put_user(current->uid, ruid)) &&
 756             !(retval = put_user(current->euid, euid)))
 757                 retval = put_user(current->suid, suid);
 758
 759         return retval;
 760 }
 761
 762 /*
 763  * Same as above, but for rgid, egid, sgid.
 764  */
 765 asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
 766 {
 767         int retval;
 768
 769         retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES);
 770         if (retval)
 771                 return retval;
 772
 773         if (!capable(CAP_SETGID)) {
 774                 if ((rgid != (gid_t) -1) && (rgid != current->gid) &&
 775                     (rgid != current->egid) && (rgid != current->sgid))
 776                         return -EPERM;
 777                 if ((egid != (gid_t) -1) && (egid != current->gid) &&
 778                     (egid != current->egid) && (egid != current->sgid))
 779                         return -EPERM;
 780                 if ((sgid != (gid_t) -1) && (sgid != current->gid) &&
 781                     (sgid != current->egid) && (sgid != current->sgid))
 782                         return -EPERM;
 783         }
 784         if (egid != (gid_t) -1) {
 785                 if (egid != current->egid) {
 786                         set_dumpable(current->mm, suid_dumpable);
 787                         smp_wmb();
 788                 }
 789                 current->egid = egid;
 790         }
 791         current->fsgid = current->egid;
 792         if (rgid != (gid_t) -1)
 793                 current->gid = rgid;
 794         if (sgid != (gid_t) -1)
 795                 current->sgid = sgid;
 796
 797         key_fsgid_changed(current);
 798         proc_id_connector(current, PROC_EVENT_GID);
 799         return 0;
 800 }
 801
 802 asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
 803 {
 804         int retval;
 805
 806         if (!(retval = put_user(current->gid, rgid)) &&
 807             !(retval = put_user(current->egid, egid)))
 808                 retval = put_user(current->sgid, sgid);
 809
 810         return retval;
 811 }
 812
 813
 814 /*
 815  * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
 816  * is used for "access()" and for the NFS daemon (letting nfsd stay at
 817  * whatever uid it wants to). It normally shadows "euid", except when
 818  * explicitly set by setfsuid() or for access..
 819  */
 820 asmlinkage long sys_setfsuid(uid_t uid)
 821 {
 822         int old_fsuid;
 823
 824         old_fsuid = current->fsuid;
 825         if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
 826                 return old_fsuid;
 827
 828         if (uid == current->uid || uid == current->euid ||
 829             uid == current->suid || uid == current->fsuid ||
 830             capable(CAP_SETUID)) {
 831                 if (uid != old_fsuid) {
 832                         set_dumpable(current->mm, suid_dumpable);
 833                         smp_wmb();
 834                 }
 835                 current->fsuid = uid;
 836         }
 837
 838         key_fsuid_changed(current);
 839         proc_id_connector(current, PROC_EVENT_UID);
 840
 841         security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
 842
 843         return old_fsuid;
 844 }
 845
 846 /*
 847  * Samma på svenska..
 848  */
 849 asmlinkage long sys_setfsgid(gid_t gid)
 850 {
 851         int old_fsgid;
 852
 853         old_fsgid = current->fsgid;
 854         if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
 855                 return old_fsgid;
 856
 857         if (gid == current->gid || gid == current->egid ||
 858             gid == current->sgid || gid == current->fsgid ||
 859             capable(CAP_SETGID)) {
 860                 if (gid != old_fsgid) {
 861                         set_dumpable(current->mm, suid_dumpable);
 862                         smp_wmb();
 863                 }
 864                 current->fsgid = gid;
 865                 key_fsgid_changed(current);
 866                 proc_id_connector(current, PROC_EVENT_GID);
 867         }
 868         return old_fsgid;
 869 }
 870
 871 asmlinkage long sys_times(struct tms __user * tbuf)
 872 {
 873         /*
 874          *      In the SMP world we might just be unlucky and have one of
 875          *      the times increment as we use it. Since the value is an
 876          *      atomically safe type this is just fine. Conceptually its
 877          *      as if the syscall took an instant longer to occur.
 878          */
 879         if (tbuf) {
 880                 struct tms tmp;
 881                 struct task_struct *tsk = current;
 882                 struct task_struct *t;
 883                 cputime_t utime, stime, cutime, cstime;
 884
 885                 spin_lock_irq(&tsk->sighand->siglock);
 886                 utime = tsk->signal->utime;
 887                 stime = tsk->signal->stime;
 888                 t = tsk;
 889                 do {
 890                         utime = cputime_add(utime, t->utime);
 891                         stime = cputime_add(stime, t->stime);
 892                         t = next_thread(t);
 893                 } while (t != tsk);
 894
 895                 cutime = tsk->signal->cutime;
 896                 cstime = tsk->signal->cstime;
 897                 spin_unlock_irq(&tsk->sighand->siglock);
 898
 899                 tmp.tms_utime = cputime_to_clock_t(utime);
 900                 tmp.tms_stime = cputime_to_clock_t(stime);
 901                 tmp.tms_cutime = cputime_to_clock_t(cutime);
 902                 tmp.tms_cstime = cputime_to_clock_t(cstime);
 903                 if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
 904                         return -EFAULT;
 905         }
 906         return (long) jiffies_64_to_clock_t(get_jiffies_64());
 907 }
 908
 909 /*
 910  * This needs some heavy checking ...
 911  * I just haven't the stomach for it. I also don't fully
 912  * understand sessions/pgrp etc. Let somebody who does explain it.
 913  *
 914  * OK, I think I have the protection semantics right.... this is really
 915  * only important on a multi-user system anyway, to make sure one user
 916  * can't send a signal to a process owned by another.  -TYT, 12/12/91
 917  *
 918  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
 919  * LBT 04.03.94
 920  */
 921 asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
 922 {
 923         struct task_struct *p;
 924         struct task_struct *group_leader = current->group_leader;
 925         struct pid *pgrp;
 926         int err;
 927
 928         if (!pid)
 929                 pid = task_pid_vnr(group_leader);
 930         if (!pgid)
 931                 pgid = pid;
 932         if (pgid < 0)
 933                 return -EINVAL;
 934
 935         /* From this point forward we keep holding onto the tasklist lock
 936          * so that our parent does not change from under us. -DaveM
 937          */
 938         write_lock_irq(&tasklist_lock);
 939
 940         err = -ESRCH;
 941         p = find_task_by_vpid(pid);
 942         if (!p)
 943                 goto out;
 944
 945         err = -EINVAL;
 946         if (!thread_group_leader(p))
 947                 goto out;
 948
 949         if (same_thread_group(p->real_parent, group_leader)) {
 950                 err = -EPERM;
 951                 if (task_session(p) != task_session(group_leader))
 952                         goto out;
 953                 err = -EACCES;
 954                 if (p->did_exec)
 955                         goto out;
 956         } else {
 957                 err = -ESRCH;
 958                 if (p != group_leader)
 959                         goto out;
 960         }
 961
 962         err = -EPERM;
 963         if (p->signal->leader)
 964                 goto out;
 965
 966         pgrp = task_pid(p);
 967         if (pgid != pid) {
 968                 struct task_struct *g;
 969
 970                 pgrp = find_vpid(pgid);
 971                 g = pid_task(pgrp, PIDTYPE_PGID);
 972                 if (!g || task_session(g) != task_session(group_leader))
 973                         goto out;
 974         }
 975
 976         err = security_task_setpgid(p, pgid);
 977         if (err)
 978                 goto out;
 979
 980         if (task_pgrp(p) != pgrp) {
 981                 change_pid(p, PIDTYPE_PGID, pgrp);
 982                 set_task_pgrp(p, pid_nr(pgrp));
 983         }
 984
 985         err = 0;
 986 out:
 987         /* All paths lead to here, thus we are safe. -DaveM */
 988         write_unlock_irq(&tasklist_lock);
 989         return err;
 990 }
 991
 992 asmlinkage long sys_getpgid(pid_t pid)
 993 {
 994         struct task_struct *p;
 995         struct pid *grp;
 996         int retval;
 997
 998         rcu_read_lock();
 999         if (!pid)
1000                 grp = task_pgrp(current);
1001         else {
1002                 retval = -ESRCH;
1003                 p = find_task_by_vpid(pid);
1004                 if (!p)
1005                         goto out;
1006                 grp = task_pgrp(p);
1007                 if (!grp)
1008                         goto out;
1009
1010                 retval = security_task_getpgid(p);
1011                 if (retval)
1012                         goto out;
1013         }
1014         retval = pid_vnr(grp);
1015 out:
1016         rcu_read_unlock();
1017         return retval;
1018 }
1019
1020 #ifdef __ARCH_WANT_SYS_GETPGRP
1021
1022 asmlinkage long sys_getpgrp(void)
1023 {
1024         return sys_getpgid(0);
1025 }
1026
1027 #endif
1028
1029 asmlinkage long sys_getsid(pid_t pid)
1030 {
1031         struct task_struct *p;
1032         struct pid *sid;
1033         int retval;
1034
1035         rcu_read_lock();
1036         if (!pid)
1037                 sid = task_session(current);
1038         else {
1039                 retval = -ESRCH;
1040                 p = find_task_by_vpid(pid);
1041                 if (!p)
1042                         goto out;
1043                 sid = task_session(p);
1044                 if (!sid)
1045                         goto out;
1046
1047                 retval = security_task_getsid(p);
1048                 if (retval)
1049                         goto out;
1050         }
1051         retval = pid_vnr(sid);
1052 out:
1053         rcu_read_unlock();
1054         return retval;
1055 }
1056
1057 asmlinkage long sys_setsid(void)
1058 {
1059         struct task_struct *group_leader = current->group_leader;
1060         struct pid *sid = task_pid(group_leader);
1061         pid_t session = pid_vnr(sid);
1062         int err = -EPERM;
1063
1064         write_lock_irq(&tasklist_lock);
1065         /* Fail if I am already a session leader */
1066         if (group_leader->signal->leader)
1067                 goto out;
1068
1069         /* Fail if a process group id already exists that equals the
1070          * proposed session id.
1071          */
1072         if (pid_task(sid, PIDTYPE_PGID))
1073                 goto out;
1074
1075         group_leader->signal->leader = 1;
1076         __set_special_pids(sid);
1077
1078         spin_lock(&group_leader->sighand->siglock);
1079         group_leader->signal->tty = NULL;
1080         spin_unlock(&group_leader->sighand->siglock);
1081
1082         err = session;
1083 out:
1084         write_unlock_irq(&tasklist_lock);
1085         return err;
1086 }
1087
1088 /*
1089  * Supplementary group IDs
1090  */
1091
1092 /* init to 2 - one for init_task, one to ensure it is never freed */
1093 struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
1094
1095 struct group_info *groups_alloc(int gidsetsize)
1096 {
1097         struct group_info *group_info;
1098         int nblocks;
1099         int i;
1100
1101         nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
1102         /* Make sure we always allocate at least one indirect block pointer */
1103         nblocks = nblocks ? : 1;
1104         group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
1105         if (!group_info)
1106                 return NULL;
1107         group_info->ngroups = gidsetsize;
1108         group_info->nblocks = nblocks;
1109         atomic_set(&group_info->usage, 1);
1110
1111         if (gidsetsize <= NGROUPS_SMALL)
1112                 group_info->blocks[0] = group_info->small_block;
1113         else {
1114                 for (i = 0; i < nblocks; i++) {
1115                         gid_t *b;
1116                         b = (void *)__get_free_page(GFP_USER);
1117                         if (!b)
1118                                 goto out_undo_partial_alloc;
1119                         group_info->blocks[i] = b;
1120                 }
1121         }
1122         return group_info;
1123
1124 out_undo_partial_alloc:
1125         while (--i >= 0) {
1126                 free_page((unsigned long)group_info->blocks[i]);
1127         }
1128         kfree(group_info);
1129         return NULL;
1130 }
1131
1132 EXPORT_SYMBOL(groups_alloc);
1133
1134 void groups_free(struct group_info *group_info)
1135 {
1136         if (group_info->blocks[0] != group_info->small_block) {
1137                 int i;
1138                 for (i = 0; i < group_info->nblocks; i++)
1139                         free_page((unsigned long)group_info->blocks[i]);
1140         }
1141         kfree(group_info);
1142 }
1143
1144 EXPORT_SYMBOL(groups_free);
1145
1146 /* export the group_info to a user-space array */
1147 static int groups_to_user(gid_t __user *grouplist,
1148     struct group_info *group_info)
1149 {
1150         int i;
1151         unsigned int count = group_info->ngroups;
1152
1153         for (i = 0; i < group_info->nblocks; i++) {
1154                 unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
1155                 unsigned int len = cp_count * sizeof(*grouplist);
1156
1157                 if (copy_to_user(grouplist, group_info->blocks[i], len))
1158                         return -EFAULT;
1159
1160                 grouplist += NGROUPS_PER_BLOCK;
1161                 count -= cp_count;
1162         }
1163         return 0;
1164 }
1165
1166 /* fill a group_info from a user-space array - it must be allocated already */
1167 static int groups_from_user(struct group_info *group_info,
1168     gid_t __user *grouplist)
1169 {
1170         int i;
1171         unsigned int count = group_info->ngroups;
1172
1173         for (i = 0; i < group_info->nblocks; i++) {
1174                 unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
1175                 unsigned int len = cp_count * sizeof(*grouplist);
1176
1177                 if (copy_from_user(group_info->blocks[i], grouplist, len))
1178                         return -EFAULT;
1179
1180                 grouplist += NGROUPS_PER_BLOCK;
1181                 count -= cp_count;
1182         }
1183         return 0;
1184 }
1185
1186 /* a simple Shell sort */
1187 static void groups_sort(struct group_info *group_info)
1188 {
1189         int base, max, stride;
1190         int gidsetsize = group_info->ngroups;
1191
1192         for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
1193                 ; /* nothing */
1194         stride /= 3;
1195
1196         while (stride) {
1197                 max = gidsetsize - stride;
1198                 for (base = 0; base < max; base++) {
1199                         int left = base;
1200                         int right = left + stride;
1201                         gid_t tmp = GROUP_AT(group_info, right);
1202
1203                         while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
1204                                 GROUP_AT(group_info, right) =
1205                                     GROUP_AT(group_info, left);
1206                                 right = left;
1207                                 left -= stride;
1208                         }
1209                         GROUP_AT(group_info, right) = tmp;
1210                 }
1211                 stride /= 3;
1212         }
1213 }
1214
1215 /* a simple bsearch */
1216 int groups_search(struct group_info *group_info, gid_t grp)
1217 {
1218         unsigned int left, right;
1219
1220         if (!group_info)
1221                 return 0;
1222
1223         left = 0;
1224         right = group_info->ngroups;
1225         while (left < right) {
1226                 unsigned int mid = (left+right)/2;
1227                 int cmp = grp - GROUP_AT(group_info, mid);
1228                 if (cmp > 0)
1229                         left = mid + 1;
1230                 else if (cmp < 0)
1231                         right = mid;
1232                 else
1233                         return 1;
1234         }
1235         return 0;
1236 }
1237
1238 /* validate and set current->group_info */
1239 int set_current_groups(struct group_info *group_info)
1240 {
1241         int retval;
1242         struct group_info *old_info;
1243
1244         retval = security_task_setgroups(group_info);
1245         if (retval)
1246                 return retval;
1247
1248         groups_sort(group_info);
1249         get_group_info(group_info);
1250
1251         task_lock(current);
1252         old_info = current->group_info;
1253         current->group_info = group_info;
1254         task_unlock(current);
1255
1256         put_group_info(old_info);
1257
1258         return 0;
1259 }
1260
1261 EXPORT_SYMBOL(set_current_groups);
1262
1263 asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
1264 {
1265         int i = 0;
1266
1267         /*
1268          *      SMP: Nobody else can change our grouplist. Thus we are
1269          *      safe.
1270          */
1271
1272         if (gidsetsize < 0)
1273                 return -EINVAL;
1274
1275         /* no need to grab task_lock here; it cannot change */
1276         i = current->group_info->ngroups;
1277         if (gidsetsize) {
1278                 if (i > gidsetsize) {
1279                         i = -EINVAL;
1280                         goto out;
1281                 }
1282                 if (groups_to_user(grouplist, current->group_info)) {
1283                         i = -EFAULT;
1284                         goto out;
1285                 }
1286         }
1287 out:
1288         return i;
1289 }
1290
1291 /*
1292  *      SMP: Our groups are copy-on-write. We can set them safely
1293  *      without another task interfering.
1294  */
1295
1296 asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
1297 {
1298         struct group_info *group_info;
1299         int retval;
1300
1301         if (!capable(CAP_SETGID))
1302                 return -EPERM;
1303         if ((unsigned)gidsetsize > NGROUPS_MAX)
1304                 return -EINVAL;
1305
1306         group_info = groups_alloc(gidsetsize);
1307         if (!group_info)
1308                 return -ENOMEM;
1309         retval = groups_from_user(group_info, grouplist);
1310         if (retval) {
1311                 put_group_info(group_info);
1312                 return retval;
1313         }
1314
1315         retval = set_current_groups(group_info);
1316         put_group_info(group_info);
1317
1318         return retval;
1319 }
1320
1321 /*
1322  * Check whether we're fsgid/egid or in the supplemental group..
1323  */
1324 int in_group_p(gid_t grp)
1325 {
1326         int retval = 1;
1327         if (grp != current->fsgid)
1328                 retval = groups_search(current->group_info, grp);
1329         return retval;
1330 }
1331
1332 EXPORT_SYMBOL(in_group_p);
1333
1334 int in_egroup_p(gid_t grp)
1335 {
1336         int retval = 1;
1337         if (grp != current->egid)
1338                 retval = groups_search(current->group_info, grp);
1339         return retval;
1340 }
1341
1342 EXPORT_SYMBOL(in_egroup_p);
1343
1344 DECLARE_RWSEM(uts_sem);
1345
1346 asmlinkage long sys_newuname(struct new_utsname __user * name)
1347 {
1348         int errno = 0;
1349
1350         down_read(&uts_sem);
1351         if (copy_to_user(name, utsname(), sizeof *name))
1352                 errno = -EFAULT;
1353         up_read(&uts_sem);
1354         return errno;
1355 }
1356
1357 asmlinkage long sys_sethostname(char __user *name, int len)
1358 {
1359         int errno;
1360         char tmp[__NEW_UTS_LEN];
1361
1362         if (!capable(CAP_SYS_ADMIN))
1363                 return -EPERM;
1364         if (len < 0 || len > __NEW_UTS_LEN)
1365                 return -EINVAL;
1366         down_write(&uts_sem);
1367         errno = -EFAULT;
1368         if (!copy_from_user(tmp, name, len)) {
1369                 memcpy(utsname()->nodename, tmp, len);
1370                 utsname()->nodename[len] = 0;
1371                 errno = 0;
1372         }
1373         up_write(&uts_sem);
1374         return errno;
1375 }
1376
1377 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
1378
1379 asmlinkage long sys_gethostname(char __user *name, int len)
1380 {
1381         int i, errno;
1382
1383         if (len < 0)
1384                 return -EINVAL;
1385         down_read(&uts_sem);
1386         i = 1 + strlen(utsname()->nodename);
1387         if (i > len)
1388                 i = len;
1389         errno = 0;
1390         if (copy_to_user(name, utsname()->nodename, i))
1391                 errno = -EFAULT;
1392         up_read(&uts_sem);
1393         return errno;
1394 }
1395
1396 #endif
1397
1398 /*
1399  * Only setdomainname; getdomainname can be implemented by calling
1400  * uname()
1401  */
1402 asmlinkage long sys_setdomainname(char __user *name, int len)
1403 {
1404         int errno;
1405         char tmp[__NEW_UTS_LEN];
1406
1407         if (!capable(CAP_SYS_ADMIN))
1408                 return -EPERM;
1409         if (len < 0 || len > __NEW_UTS_LEN)
1410                 return -EINVAL;
1411
1412         down_write(&uts_sem);
1413         errno = -EFAULT;
1414         if (!copy_from_user(tmp, name, len)) {
1415                 memcpy(utsname()->domainname, tmp, len);
1416                 utsname()->domainname[len] = 0;
1417                 errno = 0;
1418         }
1419         up_write(&uts_sem);
1420         return errno;
1421 }
1422
1423 asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1424 {
1425         if (resource >= RLIM_NLIMITS)
1426                 return -EINVAL;
1427         else {
1428                 struct rlimit value;
1429                 task_lock(current->group_leader);
1430                 value = current->signal->rlim[resource];
1431                 task_unlock(current->group_leader);
1432                 return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
1433         }
1434 }
1435
1436 #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
1437
1438 /*
1439  *      Back compatibility for getrlimit. Needed for some apps.
1440  */
1441
1442 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1443 {
1444         struct rlimit x;
1445         if (resource >= RLIM_NLIMITS)
1446                 return -EINVAL;
1447
1448         task_lock(current->group_leader);
1449         x = current->signal->rlim[resource];
1450         task_unlock(current->group_leader);
1451         if (x.rlim_cur > 0x7FFFFFFF)
1452                 x.rlim_cur = 0x7FFFFFFF;
1453         if (x.rlim_max > 0x7FFFFFFF)
1454                 x.rlim_max = 0x7FFFFFFF;
1455         return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
1456 }
1457
1458 #endif
1459
1460 asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
1461 {
1462         struct rlimit new_rlim, *old_rlim;
1463         unsigned long it_prof_secs;
1464         int retval;
1465
1466         if (resource >= RLIM_NLIMITS)
1467                 return -EINVAL;
1468         if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
1469                 return -EFAULT;
1470         if (new_rlim.rlim_cur > new_rlim.rlim_max)
1471                 return -EINVAL;
1472         old_rlim = current->signal->rlim + resource;
1473         if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
1474             !capable(CAP_SYS_RESOURCE))
1475                 return -EPERM;
1476         if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
1477                 return -EPERM;
1478
1479         retval = security_task_setrlimit(resource, &new_rlim);
1480         if (retval)
1481                 return retval;
1482
1483         if (resource == RLIMIT_CPU && new_rlim.rlim_cur == 0) {
1484                 /*
1485                  * The caller is asking for an immediate RLIMIT_CPU
1486                  * expiry.  But we use the zero value to mean "it was
1487                  * never set".  So let's cheat and make it one second
1488                  * instead
1489                  */
1490                 new_rlim.rlim_cur = 1;
1491         }
1492
1493         task_lock(current->group_leader);
1494         *old_rlim = new_rlim;
1495         task_unlock(current->group_leader);
1496
1497         if (resource != RLIMIT_CPU)
1498                 goto out;
1499
1500         /*
1501          * RLIMIT_CPU handling.   Note that the kernel fails to return an error
1502          * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
1503          * very long-standing error, and fixing it now risks breakage of
1504          * applications, so we live with it
1505          */
1506         if (new_rlim.rlim_cur == RLIM_INFINITY)
1507                 goto out;
1508
1509         it_prof_secs = cputime_to_secs(current->signal->it_prof_expires);
1510         if (it_prof_secs == 0 || new_rlim.rlim_cur <= it_prof_secs) {
1511                 unsigned long rlim_cur = new_rlim.rlim_cur;
1512                 cputime_t cputime;
1513
1514                 cputime = secs_to_cputime(rlim_cur);
1515                 read_lock(&tasklist_lock);
1516                 spin_lock_irq(&current->sighand->siglock);
1517                 set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
1518                 spin_unlock_irq(&current->sighand->siglock);
1519                 read_unlock(&tasklist_lock);
1520         }
1521 out:
1522         return 0;
1523 }
1524
1525 /*
1526  * It would make sense to put struct rusage in the task_struct,
1527  * except that would make the task_struct be *really big*.  After
1528  * task_struct gets moved into malloc'ed memory, it would
1529  * make sense to do this.  It will make moving the rest of the information
1530  * a lot simpler!  (Which we're not doing right now because we're not
1531  * measuring them yet).
1532  *
1533  * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
1534  * races with threads incrementing their own counters.  But since word
1535  * reads are atomic, we either get new values or old values and we don't
1536  * care which for the sums.  We always take the siglock to protect reading
1537  * the c* fields from p->signal from races with exit.c updating those
1538  * fields when reaping, so a sample either gets all the additions of a
1539  * given child after it's reaped, or none so this sample is before reaping.
1540  *
1541  * Locking:
1542  * We need to take the siglock for CHILDEREN, SELF and BOTH
1543  * for  the cases current multithreaded, non-current single threaded
1544  * non-current multithreaded.  Thread traversal is now safe with
1545  * the siglock held.
1546  * Strictly speaking, we donot need to take the siglock if we are current and
1547  * single threaded,  as no one else can take our signal_struct away, no one
1548  * else can  reap the  children to update signal->c* counters, and no one else
1549  * can race with the signal-> fields. If we do not take any lock, the
1550  * signal-> fields could be read out of order while another thread was just
1551  * exiting. So we should  place a read memory barrier when we avoid the lock.
1552  * On the writer side,  write memory barrier is implied in  __exit_signal
1553  * as __exit_signal releases  the siglock spinlock after updating the signal->
1554  * fields. But we don't do this yet to keep things simple.
1555  *
1556  */
1557
1558 static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r,
1559                                      cputime_t *utimep, cputime_t *stimep)
1560 {
1561         *utimep = cputime_add(*utimep, t->utime);
1562         *stimep = cputime_add(*stimep, t->stime);
1563         r->ru_nvcsw += t->nvcsw;
1564         r->ru_nivcsw += t->nivcsw;
1565         r->ru_minflt += t->min_flt;
1566         r->ru_majflt += t->maj_flt;
1567         r->ru_inblock += task_io_get_inblock(t);
1568         r->ru_oublock += task_io_get_oublock(t);
1569 }
1570
1571 static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
1572 {
1573         struct task_struct *t;
1574         unsigned long flags;
1575         cputime_t utime, stime;
1576
1577         memset((char *) r, 0, sizeof *r);
1578         utime = stime = cputime_zero;
1579
1580         if (who == RUSAGE_THREAD) {
1581                 accumulate_thread_rusage(p, r, &utime, &stime);
1582                 goto out;
1583         }
1584
1585         if (!lock_task_sighand(p, &flags))
1586                 return;
1587
1588         switch (who) {
1589                 case RUSAGE_BOTH:
1590                 case RUSAGE_CHILDREN:
1591                         utime = p->signal->cutime;
1592                         stime = p->signal->cstime;
1593                         r->ru_nvcsw = p->signal->cnvcsw;
1594                         r->ru_nivcsw = p->signal->cnivcsw;
1595                         r->ru_minflt = p->signal->cmin_flt;
1596                         r->ru_majflt = p->signal->cmaj_flt;
1597                         r->ru_inblock = p->signal->cinblock;
1598                         r->ru_oublock = p->signal->coublock;
1599
1600                         if (who == RUSAGE_CHILDREN)
1601                                 break;
1602
1603                 case RUSAGE_SELF:
1604                         utime = cputime_add(utime, p->signal->utime);
1605                         stime = cputime_add(stime, p->signal->stime);
1606                         r->ru_nvcsw += p->signal->nvcsw;
1607                         r->ru_nivcsw += p->signal->nivcsw;
1608                         r->ru_minflt += p->signal->min_flt;
1609                         r->ru_majflt += p->signal->maj_flt;
1610                         r->ru_inblock += p->signal->inblock;
1611                         r->ru_oublock += p->signal->oublock;
1612                         t = p;
1613                         do {
1614                                 accumulate_thread_rusage(t, r, &utime, &stime);
1615                                 t = next_thread(t);
1616                         } while (t != p);
1617                         break;
1618
1619                 default:
1620                         BUG();
1621         }
1622         unlock_task_sighand(p, &flags);
1623
1624 out:
1625         cputime_to_timeval(utime, &r->ru_utime);
1626         cputime_to_timeval(stime, &r->ru_stime);
1627 }
1628
1629 int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
1630 {
1631         struct rusage r;
1632         k_getrusage(p, who, &r);
1633         return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
1634 }
1635
1636 asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
1637 {
1638         if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
1639             who != RUSAGE_THREAD)
1640                 return -EINVAL;
1641         return getrusage(current, who, ru);
1642 }
1643
1644 asmlinkage long sys_umask(int mask)
1645 {
1646         mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
1647         return mask;
1648 }
1649
1650 asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
1651                           unsigned long arg4, unsigned long arg5)
1652 {
1653         long error = 0;
1654
1655         if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
1656                 return error;
1657
1658         switch (option) {
1659                 case PR_SET_PDEATHSIG:
1660                         if (!valid_signal(arg2)) {
1661                                 error = -EINVAL;
1662                                 break;
1663                         }
1664                         current->pdeath_signal = arg2;
1665                         break;
1666                 case PR_GET_PDEATHSIG:
1667                         error = put_user(current->pdeath_signal, (int __user *)arg2);
1668                         break;
1669                 case PR_GET_DUMPABLE:
1670                         error = get_dumpable(current->mm);
1671                         break;
1672                 case PR_SET_DUMPABLE:
1673                         if (arg2 < 0 || arg2 > 1) {
1674                                 error = -EINVAL;
1675                                 break;
1676                         }
1677                         set_dumpable(current->mm, arg2);
1678                         break;
1679
1680                 case PR_SET_UNALIGN:
1681                         error = SET_UNALIGN_CTL(current, arg2);
1682                         break;
1683                 case PR_GET_UNALIGN:
1684                         error = GET_UNALIGN_CTL(current, arg2);
1685                         break;
1686                 case PR_SET_FPEMU:
1687                         error = SET_FPEMU_CTL(current, arg2);
1688                         break;
1689                 case PR_GET_FPEMU:
1690                         error = GET_FPEMU_CTL(current, arg2);
1691                         break;
1692                 case PR_SET_FPEXC:
1693                         error = SET_FPEXC_CTL(current, arg2);
1694                         break;
1695                 case PR_GET_FPEXC:
1696                         error = GET_FPEXC_CTL(current, arg2);
1697                         break;
1698                 case PR_GET_TIMING:
1699                         error = PR_TIMING_STATISTICAL;
1700                         break;
1701                 case PR_SET_TIMING:
1702                         if (arg2 != PR_TIMING_STATISTICAL)
1703                                 error = -EINVAL;
1704                         break;
1705
1706                 case PR_SET_NAME: {
1707                         struct task_struct *me = current;
1708                         unsigned char ncomm[sizeof(me->comm)];
1709
1710                         ncomm[sizeof(me->comm)-1] = 0;
1711                         if (strncpy_from_user(ncomm, (char __user *)arg2,
1712                                                 sizeof(me->comm)-1) < 0)
1713                                 return -EFAULT;
1714                         set_task_comm(me, ncomm);
1715                         return 0;
1716                 }
1717                 case PR_GET_NAME: {
1718                         struct task_struct *me = current;
1719                         unsigned char tcomm[sizeof(me->comm)];
1720
1721                         get_task_comm(tcomm, me);
1722                         if (copy_to_user((char __user *)arg2, tcomm, sizeof(tcomm)))
1723                                 return -EFAULT;
1724                         return 0;
1725                 }
1726                 case PR_GET_ENDIAN:
1727                         error = GET_ENDIAN(current, arg2);
1728                         break;
1729                 case PR_SET_ENDIAN:
1730                         error = SET_ENDIAN(current, arg2);
1731                         break;
1732
1733                 case PR_GET_SECCOMP:
1734                         error = prctl_get_seccomp();
1735                         break;
1736                 case PR_SET_SECCOMP:
1737                         error = prctl_set_seccomp(arg2);
1738                         break;
1739                 case PR_GET_TSC:
1740                         error = GET_TSC_CTL(arg2);
1741                         break;
1742                 case PR_SET_TSC:
1743                         error = SET_TSC_CTL(arg2);
1744                         break;
1745                 default:
1746                         error = -EINVAL;
1747                         break;
1748         }
1749         return error;
1750 }
1751
1752 asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
1753                            struct getcpu_cache __user *unused)
1754 {
1755         int err = 0;
1756         int cpu = raw_smp_processor_id();
1757         if (cpup)
1758                 err |= put_user(cpu, cpup);
1759         if (nodep)
1760                 err |= put_user(cpu_to_node(cpu), nodep);
1761         return err ? -EFAULT : 0;
1762 }
1763
1764 char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
1765
1766 static void argv_cleanup(char **argv, char **envp)
1767 {
1768         argv_free(argv);
1769 }
1770
1771 /**
1772  * orderly_poweroff - Trigger an orderly system poweroff
1773  * @force: force poweroff if command execution fails
1774  *
1775  * This may be called from any context to trigger a system shutdown.
1776  * If the orderly shutdown fails, it will force an immediate shutdown.
1777  */
1778 int orderly_poweroff(bool force)
1779 {
1780         int argc;
1781         char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
1782         static char *envp[] = {
1783                 "HOME=/",
1784                 "PATH=/sbin:/bin:/usr/sbin:/usr/bin",
1785                 NULL
1786         };
1787         int ret = -ENOMEM;
1788         struct subprocess_info *info;
1789
1790         if (argv == NULL) {
1791                 printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
1792                        __func__, poweroff_cmd);
1793                 goto out;
1794         }
1795
1796         info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
1797         if (info == NULL) {
1798                 argv_free(argv);
1799                 goto out;
1800         }
1801
1802         call_usermodehelper_setcleanup(info, argv_cleanup);
1803
1804         ret = call_usermodehelper_exec(info, UMH_NO_WAIT);
1805
1806   out:
1807         if (ret && force) {
1808                 printk(KERN_WARNING "Failed to start orderly shutdown: "
1809                        "forcing the issue\n");
1810
1811                 /* I guess this should try to kick off some daemon to
1812                    sync and poweroff asap.  Or not even bother syncing
1813                    if we're doing an emergency shutdown? */
1814                 emergency_sync();
1815                 kernel_power_off();
1816         }
1817
1818         return ret;
1819 }
1820 EXPORT_SYMBOL_GPL(orderly_poweroff);