string: factorize skip_spaces and export it to be generally available
[safe/jmp/linux-2.6] / kernel / power / suspend_test.c
1 /*
2  * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
3  *
4  * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
5  *
6  * This file is released under the GPLv2.
7  */
8
9 #include <linux/init.h>
10 #include <linux/rtc.h>
11
12 #include "power.h"
13
14 /*
15  * We test the system suspend code by setting an RTC wakealarm a short
16  * time in the future, then suspending.  Suspending the devices won't
17  * normally take long ... some systems only need a few milliseconds.
18  *
19  * The time it takes is system-specific though, so when we test this
20  * during system bootup we allow a LOT of time.
21  */
22 #define TEST_SUSPEND_SECONDS    10
23
24 static unsigned long suspend_test_start_time;
25
26 void suspend_test_start(void)
27 {
28         /* FIXME Use better timebase than "jiffies", ideally a clocksource.
29          * What we want is a hardware counter that will work correctly even
30          * during the irqs-are-off stages of the suspend/resume cycle...
31          */
32         suspend_test_start_time = jiffies;
33 }
34
35 void suspend_test_finish(const char *label)
36 {
37         long nj = jiffies - suspend_test_start_time;
38         unsigned msec;
39
40         msec = jiffies_to_msecs(abs(nj));
41         pr_info("PM: %s took %d.%03d seconds\n", label,
42                         msec / 1000, msec % 1000);
43
44         /* Warning on suspend means the RTC alarm period needs to be
45          * larger -- the system was sooo slooowwww to suspend that the
46          * alarm (should have) fired before the system went to sleep!
47          *
48          * Warning on either suspend or resume also means the system
49          * has some performance issues.  The stack dump of a WARN_ON
50          * is more likely to get the right attention than a printk...
51          */
52         WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
53              "Component: %s, time: %u\n", label, msec);
54 }
55
56 /*
57  * To test system suspend, we need a hands-off mechanism to resume the
58  * system.  RTCs wake alarms are a common self-contained mechanism.
59  */
60
61 static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
62 {
63         static char err_readtime[] __initdata =
64                 KERN_ERR "PM: can't read %s time, err %d\n";
65         static char err_wakealarm [] __initdata =
66                 KERN_ERR "PM: can't set %s wakealarm, err %d\n";
67         static char err_suspend[] __initdata =
68                 KERN_ERR "PM: suspend test failed, error %d\n";
69         static char info_test[] __initdata =
70                 KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
71
72         unsigned long           now;
73         struct rtc_wkalrm       alm;
74         int                     status;
75
76         /* this may fail if the RTC hasn't been initialized */
77         status = rtc_read_time(rtc, &alm.time);
78         if (status < 0) {
79                 printk(err_readtime, dev_name(&rtc->dev), status);
80                 return;
81         }
82         rtc_tm_to_time(&alm.time, &now);
83
84         memset(&alm, 0, sizeof alm);
85         rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
86         alm.enabled = true;
87
88         status = rtc_set_alarm(rtc, &alm);
89         if (status < 0) {
90                 printk(err_wakealarm, dev_name(&rtc->dev), status);
91                 return;
92         }
93
94         if (state == PM_SUSPEND_MEM) {
95                 printk(info_test, pm_states[state]);
96                 status = pm_suspend(state);
97                 if (status == -ENODEV)
98                         state = PM_SUSPEND_STANDBY;
99         }
100         if (state == PM_SUSPEND_STANDBY) {
101                 printk(info_test, pm_states[state]);
102                 status = pm_suspend(state);
103         }
104         if (status < 0)
105                 printk(err_suspend, status);
106
107         /* Some platforms can't detect that the alarm triggered the
108          * wakeup, or (accordingly) disable it after it afterwards.
109          * It's supposed to give oneshot behavior; cope.
110          */
111         alm.enabled = false;
112         rtc_set_alarm(rtc, &alm);
113 }
114
115 static int __init has_wakealarm(struct device *dev, void *name_ptr)
116 {
117         struct rtc_device *candidate = to_rtc_device(dev);
118
119         if (!candidate->ops->set_alarm)
120                 return 0;
121         if (!device_may_wakeup(candidate->dev.parent))
122                 return 0;
123
124         *(const char **)name_ptr = dev_name(dev);
125         return 1;
126 }
127
128 /*
129  * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
130  * at startup time.  They're normally disabled, for faster boot and because
131  * we can't know which states really work on this particular system.
132  */
133 static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
134
135 static char warn_bad_state[] __initdata =
136         KERN_WARNING "PM: can't test '%s' suspend state\n";
137
138 static int __init setup_test_suspend(char *value)
139 {
140         unsigned i;
141
142         /* "=mem" ==> "mem" */
143         value++;
144         for (i = 0; i < PM_SUSPEND_MAX; i++) {
145                 if (!pm_states[i])
146                         continue;
147                 if (strcmp(pm_states[i], value) != 0)
148                         continue;
149                 test_state = (__force suspend_state_t) i;
150                 return 0;
151         }
152         printk(warn_bad_state, value);
153         return 0;
154 }
155 __setup("test_suspend", setup_test_suspend);
156
157 static int __init test_suspend(void)
158 {
159         static char             warn_no_rtc[] __initdata =
160                 KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
161
162         char                    *pony = NULL;
163         struct rtc_device       *rtc = NULL;
164
165         /* PM is initialized by now; is that state testable? */
166         if (test_state == PM_SUSPEND_ON)
167                 goto done;
168         if (!valid_state(test_state)) {
169                 printk(warn_bad_state, pm_states[test_state]);
170                 goto done;
171         }
172
173         /* RTCs have initialized by now too ... can we use one? */
174         class_find_device(rtc_class, NULL, &pony, has_wakealarm);
175         if (pony)
176                 rtc = rtc_class_open(pony);
177         if (!rtc) {
178                 printk(warn_no_rtc);
179                 goto done;
180         }
181
182         /* go for it */
183         test_wakealarm(rtc, test_state);
184         rtc_class_close(rtc);
185 done:
186         return 0;
187 }
188 late_initcall(test_suspend);