bzip2/lzma: comprehensible error messages for missing decompressor
[safe/jmp/linux-2.6] / init / do_mounts_rd.c
1
2 #include <linux/kernel.h>
3 #include <linux/fs.h>
4 #include <linux/minix_fs.h>
5 #include <linux/ext2_fs.h>
6 #include <linux/romfs_fs.h>
7 #include <linux/cramfs_fs.h>
8 #include <linux/initrd.h>
9 #include <linux/string.h>
10
11 #include "do_mounts.h"
12 #include "../fs/squashfs/squashfs_fs.h"
13
14 #include <linux/decompress/generic.h>
15
16
17 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
18
19 static int __init prompt_ramdisk(char *str)
20 {
21         rd_prompt = simple_strtol(str,NULL,0) & 1;
22         return 1;
23 }
24 __setup("prompt_ramdisk=", prompt_ramdisk);
25
26 int __initdata rd_image_start;          /* starting block # of image */
27
28 static int __init ramdisk_start_setup(char *str)
29 {
30         rd_image_start = simple_strtol(str,NULL,0);
31         return 1;
32 }
33 __setup("ramdisk_start=", ramdisk_start_setup);
34
35 static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
36
37 /*
38  * This routine tries to find a RAM disk image to load, and returns the
39  * number of blocks to read for a non-compressed image, 0 if the image
40  * is a compressed image, and -1 if an image with the right magic
41  * numbers could not be found.
42  *
43  * We currently check for the following magic numbers:
44  *      minix
45  *      ext2
46  *      romfs
47  *      cramfs
48  *      squashfs
49  *      gzip
50  */
51 static int __init
52 identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
53 {
54         const int size = 512;
55         struct minix_super_block *minixsb;
56         struct ext2_super_block *ext2sb;
57         struct romfs_super_block *romfsb;
58         struct cramfs_super *cramfsb;
59         struct squashfs_super_block *squashfsb;
60         int nblocks = -1;
61         unsigned char *buf;
62         const char *compress_name;
63
64         buf = kmalloc(size, GFP_KERNEL);
65         if (!buf)
66                 return -1;
67
68         minixsb = (struct minix_super_block *) buf;
69         ext2sb = (struct ext2_super_block *) buf;
70         romfsb = (struct romfs_super_block *) buf;
71         cramfsb = (struct cramfs_super *) buf;
72         squashfsb = (struct squashfs_super_block *) buf;
73         memset(buf, 0xe5, size);
74
75         /*
76          * Read block 0 to test for compressed kernel
77          */
78         sys_lseek(fd, start_block * BLOCK_SIZE, 0);
79         sys_read(fd, buf, size);
80
81         *decompressor = decompress_method(buf, size, &compress_name);
82         if (compress_name) {
83                 printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n",
84                        compress_name, start_block);
85                 if (!*decompressor)
86                         printk(KERN_CRIT "RAMDISK: %s decompressor not configured!\n",
87                                compress_name);
88                 nblocks = 0;
89                 goto done;
90         }
91
92         /* romfs is at block zero too */
93         if (romfsb->word0 == ROMSB_WORD0 &&
94             romfsb->word1 == ROMSB_WORD1) {
95                 printk(KERN_NOTICE
96                        "RAMDISK: romfs filesystem found at block %d\n",
97                        start_block);
98                 nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
99                 goto done;
100         }
101
102         if (cramfsb->magic == CRAMFS_MAGIC) {
103                 printk(KERN_NOTICE
104                        "RAMDISK: cramfs filesystem found at block %d\n",
105                        start_block);
106                 nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
107                 goto done;
108         }
109
110         /* squashfs is at block zero too */
111         if (le32_to_cpu(squashfsb->s_magic) == SQUASHFS_MAGIC) {
112                 printk(KERN_NOTICE
113                        "RAMDISK: squashfs filesystem found at block %d\n",
114                        start_block);
115                 nblocks = (le64_to_cpu(squashfsb->bytes_used) + BLOCK_SIZE - 1)
116                          >> BLOCK_SIZE_BITS;
117                 goto done;
118         }
119
120         /*
121          * Read block 1 to test for minix and ext2 superblock
122          */
123         sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
124         sys_read(fd, buf, size);
125
126         /* Try minix */
127         if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
128             minixsb->s_magic == MINIX_SUPER_MAGIC2) {
129                 printk(KERN_NOTICE
130                        "RAMDISK: Minix filesystem found at block %d\n",
131                        start_block);
132                 nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
133                 goto done;
134         }
135
136         /* Try ext2 */
137         if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
138                 printk(KERN_NOTICE
139                        "RAMDISK: ext2 filesystem found at block %d\n",
140                        start_block);
141                 nblocks = le32_to_cpu(ext2sb->s_blocks_count) <<
142                         le32_to_cpu(ext2sb->s_log_block_size);
143                 goto done;
144         }
145
146         printk(KERN_NOTICE
147                "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
148                start_block);
149
150 done:
151         sys_lseek(fd, start_block * BLOCK_SIZE, 0);
152         kfree(buf);
153         return nblocks;
154 }
155
156 int __init rd_load_image(char *from)
157 {
158         int res = 0;
159         int in_fd, out_fd;
160         unsigned long rd_blocks, devblocks;
161         int nblocks, i, disk;
162         char *buf = NULL;
163         unsigned short rotate = 0;
164         decompress_fn decompressor = NULL;
165 #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
166         char rotator[4] = { '|' , '/' , '-' , '\\' };
167 #endif
168
169         out_fd = sys_open("/dev/ram", O_RDWR, 0);
170         if (out_fd < 0)
171                 goto out;
172
173         in_fd = sys_open(from, O_RDONLY, 0);
174         if (in_fd < 0)
175                 goto noclose_input;
176
177         nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
178         if (nblocks < 0)
179                 goto done;
180
181         if (nblocks == 0) {
182                 if (crd_load(in_fd, out_fd, decompressor) == 0)
183                         goto successful_load;
184                 goto done;
185         }
186
187         /*
188          * NOTE NOTE: nblocks is not actually blocks but
189          * the number of kibibytes of data to load into a ramdisk.
190          * So any ramdisk block size that is a multiple of 1KiB should
191          * work when the appropriate ramdisk_blocksize is specified
192          * on the command line.
193          *
194          * The default ramdisk_blocksize is 1KiB and it is generally
195          * silly to use anything else, so make sure to use 1KiB
196          * blocksize while generating ext2fs ramdisk-images.
197          */
198         if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
199                 rd_blocks = 0;
200         else
201                 rd_blocks >>= 1;
202
203         if (nblocks > rd_blocks) {
204                 printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n",
205                        nblocks, rd_blocks);
206                 goto done;
207         }
208
209         /*
210          * OK, time to copy in the data
211          */
212         if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
213                 devblocks = 0;
214         else
215                 devblocks >>= 1;
216
217         if (strcmp(from, "/initrd.image") == 0)
218                 devblocks = nblocks;
219
220         if (devblocks == 0) {
221                 printk(KERN_ERR "RAMDISK: could not determine device size\n");
222                 goto done;
223         }
224
225         buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
226         if (!buf) {
227                 printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
228                 goto done;
229         }
230
231         printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ",
232                 nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : "");
233         for (i = 0, disk = 1; i < nblocks; i++) {
234                 if (i && (i % devblocks == 0)) {
235                         printk("done disk #%d.\n", disk++);
236                         rotate = 0;
237                         if (sys_close(in_fd)) {
238                                 printk("Error closing the disk.\n");
239                                 goto noclose_input;
240                         }
241                         change_floppy("disk #%d", disk);
242                         in_fd = sys_open(from, O_RDONLY, 0);
243                         if (in_fd < 0)  {
244                                 printk("Error opening disk.\n");
245                                 goto noclose_input;
246                         }
247                         printk("Loading disk #%d... ", disk);
248                 }
249                 sys_read(in_fd, buf, BLOCK_SIZE);
250                 sys_write(out_fd, buf, BLOCK_SIZE);
251 #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
252                 if (!(i % 16)) {
253                         printk("%c\b", rotator[rotate & 0x3]);
254                         rotate++;
255                 }
256 #endif
257         }
258         printk("done.\n");
259
260 successful_load:
261         res = 1;
262 done:
263         sys_close(in_fd);
264 noclose_input:
265         sys_close(out_fd);
266 out:
267         kfree(buf);
268         sys_unlink("/dev/ram");
269         return res;
270 }
271
272 int __init rd_load_disk(int n)
273 {
274         if (rd_prompt)
275                 change_floppy("root floppy disk to be loaded into RAM disk");
276         create_dev("/dev/root", ROOT_DEV);
277         create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n));
278         return rd_load_image("/dev/root");
279 }
280
281 static int exit_code;
282 static int decompress_error;
283 static int crd_infd, crd_outfd;
284
285 static int __init compr_fill(void *buf, unsigned int len)
286 {
287         int r = sys_read(crd_infd, buf, len);
288         if (r < 0)
289                 printk(KERN_ERR "RAMDISK: error while reading compressed data");
290         else if (r == 0)
291                 printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
292         return r;
293 }
294
295 static int __init compr_flush(void *window, unsigned int outcnt)
296 {
297         int written = sys_write(crd_outfd, window, outcnt);
298         if (written != outcnt) {
299                 if (decompress_error == 0)
300                         printk(KERN_ERR
301                                "RAMDISK: incomplete write (%d != %d)\n",
302                                written, outcnt);
303                 decompress_error = 1;
304                 return -1;
305         }
306         return outcnt;
307 }
308
309 static void __init error(char *x)
310 {
311         printk(KERN_ERR "%s\n", x);
312         exit_code = 1;
313         decompress_error = 1;
314 }
315
316 static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
317 {
318         int result;
319         crd_infd = in_fd;
320         crd_outfd = out_fd;
321         result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
322         if (decompress_error)
323                 result = 1;
324         return result;
325 }