[SCSI] cxgb3i, iser, iscsi_tcp: set target can queue
[safe/jmp/linux-2.6] / include / scsi / libfc.h
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19
20 #ifndef _LIBFC_H_
21 #define _LIBFC_H_
22
23 #include <linux/timer.h>
24 #include <linux/if.h>
25 #include <linux/percpu.h>
26
27 #include <scsi/scsi_transport.h>
28 #include <scsi/scsi_transport_fc.h>
29
30 #include <scsi/fc/fc_fcp.h>
31 #include <scsi/fc/fc_ns.h>
32 #include <scsi/fc/fc_els.h>
33 #include <scsi/fc/fc_gs.h>
34
35 #include <scsi/fc_frame.h>
36
37 #define LIBFC_DEBUG
38
39 #ifdef LIBFC_DEBUG
40 /* Log messages */
41 #define FC_DBG(fmt, args...)                                            \
42         do {                                                            \
43                 printk(KERN_INFO "%s " fmt, __func__, ##args);          \
44         } while (0)
45 #else
46 #define FC_DBG(fmt, args...)
47 #endif
48
49 /*
50  * libfc error codes
51  */
52 #define FC_NO_ERR       0       /* no error */
53 #define FC_EX_TIMEOUT   1       /* Exchange timeout */
54 #define FC_EX_CLOSED    2       /* Exchange closed */
55
56 /* some helpful macros */
57
58 #define ntohll(x) be64_to_cpu(x)
59 #define htonll(x) cpu_to_be64(x)
60
61 #define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2]))
62
63 #define hton24(p, v)    do {                    \
64                 p[0] = (((v) >> 16) & 0xFF);    \
65                 p[1] = (((v) >> 8) & 0xFF);     \
66                 p[2] = ((v) & 0xFF);            \
67         } while (0)
68
69 /*
70  * FC HBA status
71  */
72 enum fc_lport_state {
73         LPORT_ST_NONE = 0,
74         LPORT_ST_FLOGI,
75         LPORT_ST_DNS,
76         LPORT_ST_RPN_ID,
77         LPORT_ST_RFT_ID,
78         LPORT_ST_SCR,
79         LPORT_ST_READY,
80         LPORT_ST_LOGO,
81         LPORT_ST_RESET
82 };
83
84 enum fc_disc_event {
85         DISC_EV_NONE = 0,
86         DISC_EV_SUCCESS,
87         DISC_EV_FAILED
88 };
89
90 enum fc_rport_state {
91         RPORT_ST_NONE = 0,
92         RPORT_ST_INIT,          /* initialized */
93         RPORT_ST_PLOGI,         /* waiting for PLOGI completion */
94         RPORT_ST_PRLI,          /* waiting for PRLI completion */
95         RPORT_ST_RTV,           /* waiting for RTV completion */
96         RPORT_ST_READY,         /* ready for use */
97         RPORT_ST_LOGO,          /* port logout sent */
98 };
99
100 enum fc_rport_trans_state {
101         FC_PORTSTATE_ROGUE,
102         FC_PORTSTATE_REAL,
103 };
104
105 /**
106  * struct fc_disc_port - temporary discovery port to hold rport identifiers
107  * @lp: Fibre Channel host port instance
108  * @peers: node for list management during discovery and RSCN processing
109  * @ids: identifiers structure to pass to fc_remote_port_add()
110  * @rport_work: work struct for starting the rport state machine
111  */
112 struct fc_disc_port {
113         struct fc_lport             *lp;
114         struct list_head            peers;
115         struct fc_rport_identifiers ids;
116         struct work_struct          rport_work;
117 };
118
119 enum fc_rport_event {
120         RPORT_EV_NONE = 0,
121         RPORT_EV_CREATED,
122         RPORT_EV_FAILED,
123         RPORT_EV_STOP,
124         RPORT_EV_LOGO
125 };
126
127 struct fc_rport_operations {
128         void (*event_callback)(struct fc_lport *, struct fc_rport *,
129                                enum fc_rport_event);
130 };
131
132 /**
133  * struct fc_rport_libfc_priv - libfc internal information about a remote port
134  * @local_port: Fibre Channel host port instance
135  * @rp_state: state tracks progress of PLOGI, PRLI, and RTV exchanges
136  * @flags: REC and RETRY supported flags
137  * @max_seq: maximum number of concurrent sequences
138  * @retries: retry count in current state
139  * @e_d_tov: error detect timeout value (in msec)
140  * @r_a_tov: resource allocation timeout value (in msec)
141  * @rp_mutex: mutex protects rport
142  * @retry_work:
143  * @event_callback: Callback for rport READY, FAILED or LOGO
144  */
145 struct fc_rport_libfc_priv {
146         struct fc_lport            *local_port;
147         enum fc_rport_state        rp_state;
148         u16                        flags;
149         #define FC_RP_FLAGS_REC_SUPPORTED       (1 << 0)
150         #define FC_RP_FLAGS_RETRY               (1 << 1)
151         u16                        max_seq;
152         unsigned int               retries;
153         unsigned int               e_d_tov;
154         unsigned int               r_a_tov;
155         enum fc_rport_trans_state  trans_state;
156         struct mutex               rp_mutex;
157         struct delayed_work        retry_work;
158         enum fc_rport_event        event;
159         struct fc_rport_operations *ops;
160         struct list_head           peers;
161         struct work_struct         event_work;
162 };
163
164 #define PRIV_TO_RPORT(x)                                                \
165         (struct fc_rport *)((void *)x - sizeof(struct fc_rport));
166 #define RPORT_TO_PRIV(x)                                                \
167         (struct fc_rport_libfc_priv *)((void *)x + sizeof(struct fc_rport));
168
169 struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *);
170
171 static inline void fc_rport_set_name(struct fc_rport *rport, u64 wwpn, u64 wwnn)
172 {
173         rport->node_name = wwnn;
174         rport->port_name = wwpn;
175 }
176
177 /*
178  * fcoe stats structure
179  */
180 struct fcoe_dev_stats {
181         u64             SecondsSinceLastReset;
182         u64             TxFrames;
183         u64             TxWords;
184         u64             RxFrames;
185         u64             RxWords;
186         u64             ErrorFrames;
187         u64             DumpedFrames;
188         u64             LinkFailureCount;
189         u64             LossOfSignalCount;
190         u64             InvalidTxWordCount;
191         u64             InvalidCRCCount;
192         u64             InputRequests;
193         u64             OutputRequests;
194         u64             ControlRequests;
195         u64             InputMegabytes;
196         u64             OutputMegabytes;
197 };
198
199 /*
200  * els data is used for passing ELS respone specific
201  * data to send ELS response mainly using infomation
202  * in exchange and sequence in EM layer.
203  */
204 struct fc_seq_els_data {
205         struct fc_frame *fp;
206         enum fc_els_rjt_reason reason;
207         enum fc_els_rjt_explan explan;
208 };
209
210 /*
211  * FCP request structure, one for each scsi cmd request
212  */
213 struct fc_fcp_pkt {
214         /*
215          * housekeeping stuff
216          */
217         struct fc_lport *lp;    /* handle to hba struct */
218         u16             state;          /* scsi_pkt state state */
219         u16             tgt_flags;      /* target flags  */
220         atomic_t        ref_cnt;        /* fcp pkt ref count */
221         spinlock_t      scsi_pkt_lock;  /* Must be taken before the host lock
222                                          * if both are held at the same time */
223         /*
224          * SCSI I/O related stuff
225          */
226         struct scsi_cmnd *cmd;          /* scsi command pointer. set/clear
227                                          * under host lock */
228         struct list_head list;          /* tracks queued commands. access under
229                                          * host lock */
230         /*
231          * timeout related stuff
232          */
233         struct timer_list timer;        /* command timer */
234         struct completion tm_done;
235         int     wait_for_comp;
236         unsigned long   start_time;     /* start jiffie */
237         unsigned long   end_time;       /* end jiffie */
238         unsigned long   last_pkt_time;   /* jiffies of last frame received */
239
240         /*
241          * scsi cmd and data transfer information
242          */
243         u32             data_len;
244         /*
245          * transport related veriables
246          */
247         struct fcp_cmnd cdb_cmd;
248         size_t          xfer_len;
249         u16             xfer_ddp;       /* this xfer is ddped */
250         u32             xfer_contig_end; /* offset of end of contiguous xfer */
251         u16             max_payload;    /* max payload size in bytes */
252
253         /*
254          * scsi/fcp return status
255          */
256         u32             io_status;      /* SCSI result upper 24 bits */
257         u8              cdb_status;
258         u8              status_code;    /* FCP I/O status */
259         /* bit 3 Underrun bit 2: overrun */
260         u8              scsi_comp_flags;
261         u32             req_flags;      /* bit 0: read bit:1 write */
262         u32             scsi_resid;     /* residule length */
263
264         struct fc_rport *rport;         /* remote port pointer */
265         struct fc_seq   *seq_ptr;       /* current sequence pointer */
266         /*
267          * Error Processing
268          */
269         u8              recov_retry;    /* count of recovery retries */
270         struct fc_seq   *recov_seq;     /* sequence for REC or SRR */
271 };
272 /*
273  * FC_FCP HELPER FUNCTIONS
274  *****************************/
275 static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
276 {
277         if (fsp && fsp->cmd)
278                 return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
279         return false;
280 }
281
282 /*
283  * Structure and function definitions for managing Fibre Channel Exchanges
284  * and Sequences
285  *
286  * fc_exch holds state for one exchange and links to its active sequence.
287  *
288  * fc_seq holds the state for an individual sequence.
289  */
290
291 struct fc_exch_mgr;
292
293 /*
294  * Sequence.
295  */
296 struct fc_seq {
297         u8      id;             /* seq ID */
298         u16     ssb_stat;       /* status flags for sequence status block */
299         u16     cnt;            /* frames sent so far on sequence */
300         u32     rec_data;       /* FC-4 value for REC */
301 };
302
303 #define FC_EX_DONE              (1 << 0) /* ep is completed */
304 #define FC_EX_RST_CLEANUP       (1 << 1) /* reset is forcing completion */
305
306 /*
307  * Exchange.
308  *
309  * Locking notes: The ex_lock protects following items:
310  *      state, esb_stat, f_ctl, seq.ssb_stat
311  *      seq_id
312  *      sequence allocation
313  */
314 struct fc_exch {
315         struct fc_exch_mgr *em;         /* exchange manager */
316         u32             state;          /* internal driver state */
317         u16             xid;            /* our exchange ID */
318         struct list_head        ex_list;        /* free or busy list linkage */
319         spinlock_t      ex_lock;        /* lock covering exchange state */
320         atomic_t        ex_refcnt;      /* reference counter */
321         struct delayed_work timeout_work; /* timer for upper level protocols */
322         struct fc_lport *lp;            /* fc device instance */
323         u16             oxid;           /* originator's exchange ID */
324         u16             rxid;           /* responder's exchange ID */
325         u32             oid;            /* originator's FCID */
326         u32             sid;            /* source FCID */
327         u32             did;            /* destination FCID */
328         u32             esb_stat;       /* exchange status for ESB */
329         u32             r_a_tov;        /* r_a_tov from rport (msec) */
330         u8              seq_id;         /* next sequence ID to use */
331         u32             f_ctl;          /* F_CTL flags for sequences */
332         u8              fh_type;        /* frame type */
333         enum fc_class   class;          /* class of service */
334         struct fc_seq   seq;            /* single sequence */
335         /*
336          * Handler for responses to this current exchange.
337          */
338         void            (*resp)(struct fc_seq *, struct fc_frame *, void *);
339         void            (*destructor)(struct fc_seq *, void *);
340         /*
341          * arg is passed as void pointer to exchange
342          * resp and destructor handlers
343          */
344         void            *arg;
345 };
346 #define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
347
348 struct libfc_function_template {
349
350         /*
351          * Interface to send a FC frame
352          *
353          * STATUS: REQUIRED
354          */
355         int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
356
357         /*
358          * Interface to send ELS/CT frames
359          *
360          * STATUS: OPTIONAL
361          */
362         struct fc_seq *(*elsct_send)(struct fc_lport *lport,
363                                      struct fc_rport *rport,
364                                      struct fc_frame *fp,
365                                      unsigned int op,
366                                      void (*resp)(struct fc_seq *,
367                                              struct fc_frame *fp,
368                                              void *arg),
369                                      void *arg, u32 timer_msec);
370
371         /*
372          * Send the FC frame payload using a new exchange and sequence.
373          *
374          * The frame pointer with some of the header's fields must be
375          * filled before calling exch_seq_send(), those fields are,
376          *
377          * - routing control
378          * - FC port did
379          * - FC port sid
380          * - FC header type
381          * - frame control
382          * - parameter or relative offset
383          *
384          * The exchange response handler is set in this routine to resp()
385          * function pointer. It can be called in two scenarios: if a timeout
386          * occurs or if a response frame is received for the exchange. The
387          * fc_frame pointer in response handler will also indicate timeout
388          * as error using IS_ERR related macros.
389          *
390          * The exchange destructor handler is also set in this routine.
391          * The destructor handler is invoked by EM layer when exchange
392          * is about to free, this can be used by caller to free its
393          * resources along with exchange free.
394          *
395          * The arg is passed back to resp and destructor handler.
396          *
397          * The timeout value (in msec) for an exchange is set if non zero
398          * timer_msec argument is specified. The timer is canceled when
399          * it fires or when the exchange is done. The exchange timeout handler
400          * is registered by EM layer.
401          *
402          * STATUS: OPTIONAL
403          */
404         struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
405                                         struct fc_frame *fp,
406                                         void (*resp)(struct fc_seq *sp,
407                                                      struct fc_frame *fp,
408                                                      void *arg),
409                                         void (*destructor)(struct fc_seq *sp,
410                                                            void *arg),
411                                         void *arg, unsigned int timer_msec);
412
413         /*
414          * Sets up the DDP context for a given exchange id on the given
415          * scatterlist if LLD supports DDP for large receive.
416          *
417          * STATUS: OPTIONAL
418          */
419         int (*ddp_setup)(struct fc_lport *lp, u16 xid,
420                          struct scatterlist *sgl, unsigned int sgc);
421         /*
422          * Completes the DDP transfer and returns the length of data DDPed
423          * for the given exchange id.
424          *
425          * STATUS: OPTIONAL
426          */
427         int (*ddp_done)(struct fc_lport *lp, u16 xid);
428         /*
429          * Send a frame using an existing sequence and exchange.
430          *
431          * STATUS: OPTIONAL
432          */
433         int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
434                         struct fc_frame *fp);
435
436         /*
437          * Send an ELS response using infomation from a previous
438          * exchange and sequence.
439          *
440          * STATUS: OPTIONAL
441          */
442         void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
443                                  struct fc_seq_els_data *els_data);
444
445         /*
446          * Abort an exchange and sequence. Generally called because of a
447          * exchange timeout or an abort from the upper layer.
448          *
449          * A timer_msec can be specified for abort timeout, if non-zero
450          * timer_msec value is specified then exchange resp handler
451          * will be called with timeout error if no response to abort.
452          *
453          * STATUS: OPTIONAL
454          */
455         int (*seq_exch_abort)(const struct fc_seq *req_sp,
456                               unsigned int timer_msec);
457
458         /*
459          * Indicate that an exchange/sequence tuple is complete and the memory
460          * allocated for the related objects may be freed.
461          *
462          * STATUS: OPTIONAL
463          */
464         void (*exch_done)(struct fc_seq *sp);
465
466         /*
467          * Assigns a EM and a free XID for an new exchange and then
468          * allocates a new exchange and sequence pair.
469          * The fp can be used to determine free XID.
470          *
471          * STATUS: OPTIONAL
472          */
473         struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp);
474
475         /*
476          * Release previously assigned XID by exch_get API.
477          * The LLD may implement this if XID is assigned by LLD
478          * in exch_get().
479          *
480          * STATUS: OPTIONAL
481          */
482         void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp,
483                          u16 ex_id);
484
485         /*
486          * Start a new sequence on the same exchange/sequence tuple.
487          *
488          * STATUS: OPTIONAL
489          */
490         struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
491
492         /*
493          * Reset an exchange manager, completing all sequences and exchanges.
494          * If s_id is non-zero, reset only exchanges originating from that FID.
495          * If d_id is non-zero, reset only exchanges sending to that FID.
496          *
497          * STATUS: OPTIONAL
498          */
499         void (*exch_mgr_reset)(struct fc_lport *,
500                                u32 s_id, u32 d_id);
501
502         /*
503          * Flush the rport work queue. Generally used before shutdown.
504          *
505          * STATUS: OPTIONAL
506          */
507         void (*rport_flush_queue)(void);
508
509         /*
510          * Receive a frame for a local port.
511          *
512          * STATUS: OPTIONAL
513          */
514         void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
515                            struct fc_frame *fp);
516
517         /*
518          * Reset the local port.
519          *
520          * STATUS: OPTIONAL
521          */
522         int (*lport_reset)(struct fc_lport *);
523
524         /*
525          * Create a remote port
526          */
527         struct fc_rport *(*rport_create)(struct fc_disc_port *);
528
529         /*
530          * Initiates the RP state machine. It is called from the LP module.
531          * This function will issue the following commands to the N_Port
532          * identified by the FC ID provided.
533          *
534          * - PLOGI
535          * - PRLI
536          * - RTV
537          *
538          * STATUS: OPTIONAL
539          */
540         int (*rport_login)(struct fc_rport *rport);
541
542         /*
543          * Logoff, and remove the rport from the transport if
544          * it had been added. This will send a LOGO to the target.
545          *
546          * STATUS: OPTIONAL
547          */
548         int (*rport_logoff)(struct fc_rport *rport);
549
550         /*
551          * Recieve a request from a remote port.
552          *
553          * STATUS: OPTIONAL
554          */
555         void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
556                                struct fc_rport *);
557
558         /*
559          * lookup an rport by it's port ID.
560          *
561          * STATUS: OPTIONAL
562          */
563         struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
564
565         /*
566          * Send a fcp cmd from fsp pkt.
567          * Called with the SCSI host lock unlocked and irqs disabled.
568          *
569          * The resp handler is called when FCP_RSP received.
570          *
571          * STATUS: OPTIONAL
572          */
573         int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
574                             void (*resp)(struct fc_seq *, struct fc_frame *fp,
575                                          void *arg));
576
577         /*
578          * Cleanup the FCP layer, used durring link down and reset
579          *
580          * STATUS: OPTIONAL
581          */
582         void (*fcp_cleanup)(struct fc_lport *lp);
583
584         /*
585          * Abort all I/O on a local port
586          *
587          * STATUS: OPTIONAL
588          */
589         void (*fcp_abort_io)(struct fc_lport *lp);
590
591         /*
592          * Receive a request for the discovery layer.
593          *
594          * STATUS: OPTIONAL
595          */
596         void (*disc_recv_req)(struct fc_seq *,
597                               struct fc_frame *, struct fc_lport *);
598
599         /*
600          * Start discovery for a local port.
601          *
602          * STATUS: OPTIONAL
603          */
604         void (*disc_start)(void (*disc_callback)(struct fc_lport *,
605                                                  enum fc_disc_event),
606                            struct fc_lport *);
607
608         /*
609          * Stop discovery for a given lport. This will remove
610          * all discovered rports
611          *
612          * STATUS: OPTIONAL
613          */
614         void (*disc_stop) (struct fc_lport *);
615
616         /*
617          * Stop discovery for a given lport. This will block
618          * until all discovered rports are deleted from the
619          * FC transport class
620          *
621          * STATUS: OPTIONAL
622          */
623         void (*disc_stop_final) (struct fc_lport *);
624 };
625
626 /* information used by the discovery layer */
627 struct fc_disc {
628         unsigned char           retry_count;
629         unsigned char           delay;
630         unsigned char           pending;
631         unsigned char           requested;
632         unsigned short          seq_count;
633         unsigned char           buf_len;
634         enum fc_disc_event      event;
635
636         void (*disc_callback)(struct fc_lport *,
637                               enum fc_disc_event);
638
639         struct list_head         rports;
640         struct fc_lport         *lport;
641         struct mutex            disc_mutex;
642         struct fc_gpn_ft_resp   partial_buf;    /* partial name buffer */
643         struct delayed_work     disc_work;
644 };
645
646 struct fc_lport {
647         struct list_head list;
648
649         /* Associations */
650         struct Scsi_Host        *host;
651         struct fc_exch_mgr      *emp;
652         struct fc_rport         *dns_rp;
653         struct fc_rport         *ptp_rp;
654         void                    *scsi_priv;
655         struct fc_disc          disc;
656
657         /* Operational Information */
658         struct libfc_function_template tt;
659         u8                      link_up;
660         u8                      qfull;
661         enum fc_lport_state     state;
662         unsigned long           boot_time;
663
664         struct fc_host_statistics host_stats;
665         struct fcoe_dev_stats   *dev_stats;
666
667         u64                     wwpn;
668         u64                     wwnn;
669         u8                      retry_count;
670
671         /* Capabilities */
672         u32                     sg_supp:1;      /* scatter gather supported */
673         u32                     seq_offload:1;  /* seq offload supported */
674         u32                     crc_offload:1;  /* crc offload supported */
675         u32                     lro_enabled:1;  /* large receive offload */
676         u32                     mfs;            /* max FC payload size */
677         unsigned int            service_params;
678         unsigned int            e_d_tov;
679         unsigned int            r_a_tov;
680         u8                      max_retry_count;
681         u16                     link_speed;
682         u16                     link_supported_speeds;
683         u16                     lro_xid;        /* max xid for fcoe lro */
684         unsigned int            lso_max;        /* max large send size */
685         struct fc_ns_fts        fcts;           /* FC-4 type masks */
686         struct fc_els_rnid_gen  rnid_gen;       /* RNID information */
687
688         /* Semaphores */
689         struct mutex lp_mutex;
690
691         /* Miscellaneous */
692         struct delayed_work     retry_work;
693         struct delayed_work     disc_work;
694 };
695
696 /*
697  * FC_LPORT HELPER FUNCTIONS
698  *****************************/
699 static inline int fc_lport_test_ready(struct fc_lport *lp)
700 {
701         return lp->state == LPORT_ST_READY;
702 }
703
704 static inline void fc_set_wwnn(struct fc_lport *lp, u64 wwnn)
705 {
706         lp->wwnn = wwnn;
707 }
708
709 static inline void fc_set_wwpn(struct fc_lport *lp, u64 wwnn)
710 {
711         lp->wwpn = wwnn;
712 }
713
714 static inline void fc_lport_state_enter(struct fc_lport *lp,
715                                         enum fc_lport_state state)
716 {
717         if (state != lp->state)
718                 lp->retry_count = 0;
719         lp->state = state;
720 }
721
722 static inline int fc_lport_init_stats(struct fc_lport *lp)
723 {
724         /* allocate per cpu stats block */
725         lp->dev_stats = alloc_percpu(struct fcoe_dev_stats);
726         if (!lp->dev_stats)
727                 return -ENOMEM;
728         return 0;
729 }
730
731 static inline void fc_lport_free_stats(struct fc_lport *lp)
732 {
733         free_percpu(lp->dev_stats);
734 }
735
736 static inline struct fcoe_dev_stats *fc_lport_get_stats(struct fc_lport *lp)
737 {
738         return per_cpu_ptr(lp->dev_stats, smp_processor_id());
739 }
740
741 static inline void *lport_priv(const struct fc_lport *lp)
742 {
743         return (void *)(lp + 1);
744 }
745
746 /**
747  * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
748  * @sht: ptr to the scsi host templ
749  * @priv_size: size of private data after fc_lport
750  *
751  * Returns: ptr to Scsi_Host
752  */
753 static inline struct Scsi_Host *
754 libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
755 {
756         return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
757 }
758
759 /*
760  * LOCAL PORT LAYER
761  *****************************/
762 int fc_lport_init(struct fc_lport *lp);
763
764 /*
765  * Destroy the specified local port by finding and freeing all
766  * fc_rports associated with it and then by freeing the fc_lport
767  * itself.
768  */
769 int fc_lport_destroy(struct fc_lport *lp);
770
771 /*
772  * Logout the specified local port from the fabric
773  */
774 int fc_fabric_logoff(struct fc_lport *lp);
775
776 /*
777  * Initiate the LP state machine. This handler will use fc_host_attr
778  * to store the FLOGI service parameters, so fc_host_attr must be
779  * initialized before calling this handler.
780  */
781 int fc_fabric_login(struct fc_lport *lp);
782
783 /*
784  * The link is up for the given local port.
785  */
786 void fc_linkup(struct fc_lport *);
787
788 /*
789  * Link is down for the given local port.
790  */
791 void fc_linkdown(struct fc_lport *);
792
793 /*
794  * Configure the local port.
795  */
796 int fc_lport_config(struct fc_lport *);
797
798 /*
799  * Reset the local port.
800  */
801 int fc_lport_reset(struct fc_lport *);
802
803 /*
804  * Set the mfs or reset
805  */
806 int fc_set_mfs(struct fc_lport *lp, u32 mfs);
807
808
809 /*
810  * REMOTE PORT LAYER
811  *****************************/
812 int fc_rport_init(struct fc_lport *lp);
813 void fc_rport_terminate_io(struct fc_rport *rp);
814
815 /*
816  * DISCOVERY LAYER
817  *****************************/
818 int fc_disc_init(struct fc_lport *lp);
819
820
821 /*
822  * SCSI LAYER
823  *****************************/
824 /*
825  * Initialize the SCSI block of libfc
826  */
827 int fc_fcp_init(struct fc_lport *);
828
829 /*
830  * This section provides an API which allows direct interaction
831  * with the SCSI-ml. Each of these functions satisfies a function
832  * pointer defined in Scsi_Host and therefore is always called
833  * directly from the SCSI-ml.
834  */
835 int fc_queuecommand(struct scsi_cmnd *sc_cmd,
836                     void (*done)(struct scsi_cmnd *));
837
838 /*
839  * complete processing of a fcp packet
840  *
841  * This function may sleep if a fsp timer is pending.
842  * The host lock must not be held by caller.
843  */
844 void fc_fcp_complete(struct fc_fcp_pkt *fsp);
845
846 /*
847  * Send an ABTS frame to the target device. The sc_cmd argument
848  * is a pointer to the SCSI command to be aborted.
849  */
850 int fc_eh_abort(struct scsi_cmnd *sc_cmd);
851
852 /*
853  * Reset a LUN by sending send the tm cmd to the target.
854  */
855 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd);
856
857 /*
858  * Reset the host adapter.
859  */
860 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd);
861
862 /*
863  * Check rport status.
864  */
865 int fc_slave_alloc(struct scsi_device *sdev);
866
867 /*
868  * Adjust the queue depth.
869  */
870 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth);
871
872 /*
873  * Change the tag type.
874  */
875 int fc_change_queue_type(struct scsi_device *sdev, int tag_type);
876
877 /*
878  * Free memory pools used by the FCP layer.
879  */
880 void fc_fcp_destroy(struct fc_lport *);
881
882 /*
883  * Set up direct-data placement for this I/O request
884  */
885 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid);
886
887 /*
888  * ELS/CT interface
889  *****************************/
890 /*
891  * Initializes ELS/CT interface
892  */
893 int fc_elsct_init(struct fc_lport *lp);
894
895
896 /*
897  * EXCHANGE MANAGER LAYER
898  *****************************/
899 /*
900  * Initializes Exchange Manager related
901  * function pointers in struct libfc_function_template.
902  */
903 int fc_exch_init(struct fc_lport *lp);
904
905 /*
906  * Allocates an Exchange Manager (EM).
907  *
908  * The EM manages exchanges for their allocation and
909  * free, also allows exchange lookup for received
910  * frame.
911  *
912  * The class is used for initializing FC class of
913  * allocated exchange from EM.
914  *
915  * The min_xid and max_xid will limit new
916  * exchange ID (XID) within this range for
917  * a new exchange.
918  * The LLD may choose to have multiple EMs,
919  * e.g. one EM instance per CPU receive thread in LLD.
920  * The LLD can use exch_get() of struct libfc_function_template
921  * to specify XID for a new exchange within
922  * a specified EM instance.
923  *
924  * The em_idx to uniquely identify an EM instance.
925  */
926 struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp,
927                                       enum fc_class class,
928                                       u16 min_xid,
929                                       u16 max_xid);
930
931 /*
932  * Free an exchange manager.
933  */
934 void fc_exch_mgr_free(struct fc_exch_mgr *mp);
935
936 /*
937  * Receive a frame on specified local port and exchange manager.
938  */
939 void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp,
940                   struct fc_frame *fp);
941
942 /*
943  * This function is for exch_seq_send function pointer in
944  * struct libfc_function_template, see comment block on
945  * exch_seq_send for description of this function.
946  */
947 struct fc_seq *fc_exch_seq_send(struct fc_lport *lp,
948                                 struct fc_frame *fp,
949                                 void (*resp)(struct fc_seq *sp,
950                                              struct fc_frame *fp,
951                                              void *arg),
952                                 void (*destructor)(struct fc_seq *sp,
953                                                    void *arg),
954                                 void *arg, u32 timer_msec);
955
956 /*
957  * send a frame using existing sequence and exchange.
958  */
959 int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp);
960
961 /*
962  * Send ELS response using mainly infomation
963  * in exchange and sequence in EM layer.
964  */
965 void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd,
966                          struct fc_seq_els_data *els_data);
967
968 /*
969  * This function is for seq_exch_abort function pointer in
970  * struct libfc_function_template, see comment block on
971  * seq_exch_abort for description of this function.
972  */
973 int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec);
974
975 /*
976  * Indicate that an exchange/sequence tuple is complete and the memory
977  * allocated for the related objects may be freed.
978  */
979 void fc_exch_done(struct fc_seq *sp);
980
981 /*
982  * Assigns a EM and XID for a frame and then allocates
983  * a new exchange and sequence pair.
984  * The fp can be used to determine free XID.
985  */
986 struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp);
987
988 /*
989  * Allocate a new exchange and sequence pair.
990  * if ex_id is zero then next free exchange id
991  * from specified exchange manger mp will be assigned.
992  */
993 struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp,
994                               struct fc_frame *fp, u16 ex_id);
995 /*
996  * Start a new sequence on the same exchange as the supplied sequence.
997  */
998 struct fc_seq *fc_seq_start_next(struct fc_seq *sp);
999
1000 /*
1001  * Reset an exchange manager, completing all sequences and exchanges.
1002  * If s_id is non-zero, reset only exchanges originating from that FID.
1003  * If d_id is non-zero, reset only exchanges sending to that FID.
1004  */
1005 void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
1006
1007 /*
1008  * Functions for fc_functions_template
1009  */
1010 void fc_get_host_speed(struct Scsi_Host *shost);
1011 void fc_get_host_port_type(struct Scsi_Host *shost);
1012 void fc_get_host_port_state(struct Scsi_Host *shost);
1013 void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout);
1014 struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *);
1015
1016 /*
1017  * module setup functions.
1018  */
1019 int fc_setup_exch_mgr(void);
1020 void fc_destroy_exch_mgr(void);
1021 int fc_setup_rport(void);
1022 void fc_destroy_rport(void);
1023
1024 #endif /* _LIBFC_H_ */