make MTD headers use strict integer types
[safe/jmp/linux-2.6] / include / mtd / mtd-abi.h
1 /*
2  * Portions of MTD ABI definition which are shared by kernel and user space
3  */
4
5 #ifndef __MTD_ABI_H__
6 #define __MTD_ABI_H__
7
8 #include <linux/types.h>
9
10 struct erase_info_user {
11         __u32 start;
12         __u32 length;
13 };
14
15 struct mtd_oob_buf {
16         __u32 start;
17         __u32 length;
18         unsigned char __user *ptr;
19 };
20
21 #define MTD_ABSENT              0
22 #define MTD_RAM                 1
23 #define MTD_ROM                 2
24 #define MTD_NORFLASH            3
25 #define MTD_NANDFLASH           4
26 #define MTD_DATAFLASH           6
27 #define MTD_UBIVOLUME           7
28
29 #define MTD_WRITEABLE           0x400   /* Device is writeable */
30 #define MTD_BIT_WRITEABLE       0x800   /* Single bits can be flipped */
31 #define MTD_NO_ERASE            0x1000  /* No erase necessary */
32 #define MTD_POWERUP_LOCK        0x2000  /* Always locked after reset */
33
34 // Some common devices / combinations of capabilities
35 #define MTD_CAP_ROM             0
36 #define MTD_CAP_RAM             (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
37 #define MTD_CAP_NORFLASH        (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
38 #define MTD_CAP_NANDFLASH       (MTD_WRITEABLE)
39
40 /* ECC byte placement */
41 #define MTD_NANDECC_OFF         0       // Switch off ECC (Not recommended)
42 #define MTD_NANDECC_PLACE       1       // Use the given placement in the structure (YAFFS1 legacy mode)
43 #define MTD_NANDECC_AUTOPLACE   2       // Use the default placement scheme
44 #define MTD_NANDECC_PLACEONLY   3       // Use the given placement in the structure (Do not store ecc result on read)
45 #define MTD_NANDECC_AUTOPL_USR  4       // Use the given autoplacement scheme rather than using the default
46
47 /* OTP mode selection */
48 #define MTD_OTP_OFF             0
49 #define MTD_OTP_FACTORY         1
50 #define MTD_OTP_USER            2
51
52 struct mtd_info_user {
53         __u8 type;
54         __u32 flags;
55         __u32 size;      // Total size of the MTD
56         __u32 erasesize;
57         __u32 writesize;
58         __u32 oobsize;   // Amount of OOB data per block (e.g. 16)
59         /* The below two fields are obsolete and broken, do not use them
60          * (TODO: remove at some point) */
61         __u32 ecctype;
62         __u32 eccsize;
63 };
64
65 struct region_info_user {
66         __u32 offset;           /* At which this region starts,
67                                          * from the beginning of the MTD */
68         __u32 erasesize;                /* For this region */
69         __u32 numblocks;                /* Number of blocks in this region */
70         __u32 regionindex;
71 };
72
73 struct otp_info {
74         __u32 start;
75         __u32 length;
76         __u32 locked;
77 };
78
79 #define MEMGETINFO              _IOR('M', 1, struct mtd_info_user)
80 #define MEMERASE                _IOW('M', 2, struct erase_info_user)
81 #define MEMWRITEOOB             _IOWR('M', 3, struct mtd_oob_buf)
82 #define MEMREADOOB              _IOWR('M', 4, struct mtd_oob_buf)
83 #define MEMLOCK                 _IOW('M', 5, struct erase_info_user)
84 #define MEMUNLOCK               _IOW('M', 6, struct erase_info_user)
85 #define MEMGETREGIONCOUNT       _IOR('M', 7, int)
86 #define MEMGETREGIONINFO        _IOWR('M', 8, struct region_info_user)
87 #define MEMSETOOBSEL            _IOW('M', 9, struct nand_oobinfo)
88 #define MEMGETOOBSEL            _IOR('M', 10, struct nand_oobinfo)
89 #define MEMGETBADBLOCK          _IOW('M', 11, __kernel_loff_t)
90 #define MEMSETBADBLOCK          _IOW('M', 12, __kernel_loff_t)
91 #define OTPSELECT               _IOR('M', 13, int)
92 #define OTPGETREGIONCOUNT       _IOW('M', 14, int)
93 #define OTPGETREGIONINFO        _IOW('M', 15, struct otp_info)
94 #define OTPLOCK                 _IOR('M', 16, struct otp_info)
95 #define ECCGETLAYOUT            _IOR('M', 17, struct nand_ecclayout)
96 #define ECCGETSTATS             _IOR('M', 18, struct mtd_ecc_stats)
97 #define MTDFILEMODE             _IO('M', 19)
98
99 /*
100  * Obsolete legacy interface. Keep it in order not to break userspace
101  * interfaces
102  */
103 struct nand_oobinfo {
104         __u32 useecc;
105         __u32 eccbytes;
106         __u32 oobfree[8][2];
107         __u32 eccpos[32];
108 };
109
110 struct nand_oobfree {
111         __u32 offset;
112         __u32 length;
113 };
114
115 #define MTD_MAX_OOBFREE_ENTRIES 8
116 /*
117  * ECC layout control structure. Exported to userspace for
118  * diagnosis and to allow creation of raw images
119  */
120 struct nand_ecclayout {
121         __u32 eccbytes;
122         __u32 eccpos[64];
123         __u32 oobavail;
124         struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
125 };
126
127 /**
128  * struct mtd_ecc_stats - error correction stats
129  *
130  * @corrected:  number of corrected bits
131  * @failed:     number of uncorrectable errors
132  * @badblocks:  number of bad blocks in this partition
133  * @bbtblocks:  number of blocks reserved for bad block tables
134  */
135 struct mtd_ecc_stats {
136         __u32 corrected;
137         __u32 failed;
138         __u32 badblocks;
139         __u32 bbtblocks;
140 };
141
142 /*
143  * Read/write file modes for access to MTD
144  */
145 enum mtd_file_modes {
146         MTD_MODE_NORMAL = MTD_OTP_OFF,
147         MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
148         MTD_MODE_OTP_USER = MTD_OTP_USER,
149         MTD_MODE_RAW,
150 };
151
152 #endif /* __MTD_ABI_H__ */