[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support
[safe/jmp/linux-2.6] / include / linux / irq.h
1 #ifndef __irq_h
2 #define __irq_h
3
4 /*
5  * Please do not include this file in generic code.  There is currently
6  * no requirement for any architecture to implement anything held
7  * within this file.
8  *
9  * Thanks. --rmk
10  */
11
12 #include <linux/config.h>
13
14 #if !defined(CONFIG_ARCH_S390)
15
16 #include <linux/linkage.h>
17 #include <linux/cache.h>
18 #include <linux/spinlock.h>
19 #include <linux/cpumask.h>
20
21 #include <asm/irq.h>
22 #include <asm/ptrace.h>
23
24 /*
25  * IRQ line status.
26  */
27 #define IRQ_INPROGRESS  1       /* IRQ handler active - do not enter! */
28 #define IRQ_DISABLED    2       /* IRQ disabled - do not enter! */
29 #define IRQ_PENDING     4       /* IRQ pending - replay on enable */
30 #define IRQ_REPLAY      8       /* IRQ has been replayed but not acked yet */
31 #define IRQ_AUTODETECT  16      /* IRQ is being autodetected */
32 #define IRQ_WAITING     32      /* IRQ not yet seen - for autodetection */
33 #define IRQ_LEVEL       64      /* IRQ level triggered */
34 #define IRQ_MASKED      128     /* IRQ masked - shouldn't be seen again */
35 #if defined(ARCH_HAS_IRQ_PER_CPU)
36 # define IRQ_PER_CPU    256     /* IRQ is per CPU */
37 # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
38 #else
39 # define CHECK_IRQ_PER_CPU(var) 0
40 #endif
41
42 /*
43  * Interrupt controller descriptor. This is all we need
44  * to describe about the low-level hardware. 
45  */
46 struct hw_interrupt_type {
47         const char * typename;
48         unsigned int (*startup)(unsigned int irq);
49         void (*shutdown)(unsigned int irq);
50         void (*enable)(unsigned int irq);
51         void (*disable)(unsigned int irq);
52         void (*ack)(unsigned int irq);
53         void (*end)(unsigned int irq);
54         void (*set_affinity)(unsigned int irq, cpumask_t dest);
55         /* Currently used only by UML, might disappear one day.*/
56 #ifdef CONFIG_IRQ_RELEASE_METHOD
57         void (*release)(unsigned int irq, void *dev_id);
58 #endif
59 };
60
61 typedef struct hw_interrupt_type  hw_irq_controller;
62
63 /*
64  * This is the "IRQ descriptor", which contains various information
65  * about the irq, including what kind of hardware handling it has,
66  * whether it is disabled etc etc.
67  *
68  * Pad this out to 32 bytes for cache and indexing reasons.
69  */
70 typedef struct irq_desc {
71         hw_irq_controller *handler;
72         void *handler_data;
73         struct irqaction *action;       /* IRQ action list */
74         unsigned int status;            /* IRQ status */
75         unsigned int depth;             /* nested irq disables */
76         unsigned int irq_count;         /* For detecting broken interrupts */
77         unsigned int irqs_unhandled;
78         spinlock_t lock;
79 #if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
80         unsigned int move_irq;          /* Flag need to re-target intr dest*/
81 #endif
82 } ____cacheline_aligned irq_desc_t;
83
84 extern irq_desc_t irq_desc [NR_IRQS];
85
86 /* Return a pointer to the irq descriptor for IRQ.  */
87 static inline irq_desc_t *
88 irq_descp (int irq)
89 {
90         return irq_desc + irq;
91 }
92
93 #include <asm/hw_irq.h> /* the arch dependent stuff */
94
95 extern int setup_irq(unsigned int irq, struct irqaction * new);
96
97 #ifdef CONFIG_GENERIC_HARDIRQS
98 extern cpumask_t irq_affinity[NR_IRQS];
99
100 #ifdef CONFIG_SMP
101 static inline void set_native_irq_info(int irq, cpumask_t mask)
102 {
103         irq_affinity[irq] = mask;
104 }
105 #else
106 static inline void set_native_irq_info(int irq, cpumask_t mask)
107 {
108 }
109 #endif
110
111 #ifdef CONFIG_SMP
112
113 #if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
114 extern cpumask_t pending_irq_cpumask[NR_IRQS];
115
116 static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
117 {
118         irq_desc_t *desc = irq_desc + irq;
119         unsigned long flags;
120
121         spin_lock_irqsave(&desc->lock, flags);
122         desc->move_irq = 1;
123         pending_irq_cpumask[irq] = mask;
124         spin_unlock_irqrestore(&desc->lock, flags);
125 }
126
127 static inline void
128 move_native_irq(int irq)
129 {
130         cpumask_t tmp;
131         irq_desc_t *desc = irq_descp(irq);
132
133         if (likely (!desc->move_irq))
134                 return;
135
136         desc->move_irq = 0;
137
138         if (likely(cpus_empty(pending_irq_cpumask[irq])))
139                 return;
140
141         if (!desc->handler->set_affinity)
142                 return;
143
144         /* note - we hold the desc->lock */
145         cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map);
146
147         /*
148          * If there was a valid mask to work with, please
149          * do the disable, re-program, enable sequence.
150          * This is *not* particularly important for level triggered
151          * but in a edge trigger case, we might be setting rte
152          * when an active trigger is comming in. This could
153          * cause some ioapics to mal-function.
154          * Being paranoid i guess!
155          */
156         if (unlikely(!cpus_empty(tmp))) {
157                 desc->handler->disable(irq);
158                 desc->handler->set_affinity(irq,tmp);
159                 desc->handler->enable(irq);
160         }
161         cpus_clear(pending_irq_cpumask[irq]);
162 }
163
164 #ifdef CONFIG_PCI_MSI
165 /*
166  * Wonder why these are dummies?
167  * For e.g the set_ioapic_affinity_vector() calls the set_ioapic_affinity_irq()
168  * counter part after translating the vector to irq info. We need to perform
169  * this operation on the real irq, when we dont use vector, i.e when
170  * pci_use_vector() is false.
171  */
172 static inline void move_irq(int irq)
173 {
174 }
175
176 static inline void set_irq_info(int irq, cpumask_t mask)
177 {
178 }
179
180 #else // CONFIG_PCI_MSI
181
182 static inline void move_irq(int irq)
183 {
184         move_native_irq(irq);
185 }
186
187 static inline void set_irq_info(int irq, cpumask_t mask)
188 {
189         set_native_irq_info(irq, mask);
190 }
191 #endif // CONFIG_PCI_MSI
192
193 #else   // CONFIG_GENERIC_PENDING_IRQ || CONFIG_IRQBALANCE
194
195 #define move_irq(x)
196 #define move_native_irq(x)
197 #define set_pending_irq(x,y)
198 static inline void set_irq_info(int irq, cpumask_t mask)
199 {
200         set_native_irq_info(irq, mask);
201 }
202
203 #endif // CONFIG_GENERIC_PENDING_IRQ
204
205 #else // CONFIG_SMP
206
207 #define move_irq(x)
208 #define move_native_irq(x)
209
210 #endif // CONFIG_SMP
211
212 extern int no_irq_affinity;
213 extern int noirqdebug_setup(char *str);
214
215 extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
216                                         struct irqaction *action);
217 extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
218 extern void note_interrupt(unsigned int irq, irq_desc_t *desc,
219                                         int action_ret, struct pt_regs *regs);
220 extern int can_request_irq(unsigned int irq, unsigned long irqflags);
221
222 extern void init_irq_proc(void);
223 #endif
224
225 extern hw_irq_controller no_irq_type;  /* needed in every arch ? */
226
227 #endif
228
229 #endif /* __irq_h */