udp: reorder udp_iter_state to remove padding on 64bit builds
[safe/jmp/linux-2.6] / include / asm-x86 / i387.h
1 /*
2  * Copyright (C) 1994 Linus Torvalds
3  *
4  * Pentium III FXSR, SSE support
5  * General FPU state handling cleanups
6  *      Gareth Hughes <gareth@valinux.com>, May 2000
7  * x86-64 work by Andi Kleen 2002
8  */
9
10 #ifndef _ASM_X86_I387_H
11 #define _ASM_X86_I387_H
12
13 #include <linux/sched.h>
14 #include <linux/kernel_stat.h>
15 #include <linux/regset.h>
16 #include <asm/asm.h>
17 #include <asm/processor.h>
18 #include <asm/sigcontext.h>
19 #include <asm/user.h>
20 #include <asm/uaccess.h>
21
22 extern void fpu_init(void);
23 extern void mxcsr_feature_mask_init(void);
24 extern int init_fpu(struct task_struct *child);
25 extern asmlinkage void math_state_restore(void);
26 extern void init_thread_xstate(void);
27
28 extern user_regset_active_fn fpregs_active, xfpregs_active;
29 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
30 extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
31
32 #ifdef CONFIG_IA32_EMULATION
33 struct _fpstate_ia32;
34 extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
35 extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
36 #endif
37
38 #ifdef CONFIG_X86_64
39
40 /* Ignore delayed exceptions from user space */
41 static inline void tolerant_fwait(void)
42 {
43         asm volatile("1: fwait\n"
44                      "2:\n"
45                      _ASM_EXTABLE(1b, 2b));
46 }
47
48 static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
49 {
50         int err;
51
52         asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
53                      "2:\n"
54                      ".section .fixup,\"ax\"\n"
55                      "3:  movl $-1,%[err]\n"
56                      "    jmp  2b\n"
57                      ".previous\n"
58                      _ASM_EXTABLE(1b, 3b)
59                      : [err] "=r" (err)
60 #if 0 /* See comment in __save_init_fpu() below. */
61                      : [fx] "r" (fx), "m" (*fx), "0" (0));
62 #else
63                      : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
64 #endif
65         if (unlikely(err))
66                 init_fpu(current);
67         return err;
68 }
69
70 #define X87_FSW_ES (1 << 7)     /* Exception Summary */
71
72 /* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
73    is pending. Clear the x87 state here by setting it to fixed
74    values. The kernel data segment can be sometimes 0 and sometimes
75    new user value. Both should be ok.
76    Use the PDA as safe address because it should be already in L1. */
77 static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
78 {
79         if (unlikely(fx->swd & X87_FSW_ES))
80                 asm volatile("fnclex");
81         alternative_input(ASM_NOP8 ASM_NOP2,
82                           "    emms\n"          /* clear stack tags */
83                           "    fildl %%gs:0",   /* load to clear state */
84                           X86_FEATURE_FXSAVE_LEAK);
85 }
86
87 static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
88 {
89         int err;
90
91         asm volatile("1:  rex64/fxsave (%[fx])\n\t"
92                      "2:\n"
93                      ".section .fixup,\"ax\"\n"
94                      "3:  movl $-1,%[err]\n"
95                      "    jmp  2b\n"
96                      ".previous\n"
97                      _ASM_EXTABLE(1b, 3b)
98                      : [err] "=r" (err), "=m" (*fx)
99 #if 0 /* See comment in __fxsave_clear() below. */
100                      : [fx] "r" (fx), "0" (0));
101 #else
102                      : [fx] "cdaSDb" (fx), "0" (0));
103 #endif
104         if (unlikely(err) &&
105             __clear_user(fx, sizeof(struct i387_fxsave_struct)))
106                 err = -EFAULT;
107         /* No need to clear here because the caller clears USED_MATH */
108         return err;
109 }
110
111 static inline void __save_init_fpu(struct task_struct *tsk)
112 {
113         /* Using "rex64; fxsave %0" is broken because, if the memory operand
114            uses any extended registers for addressing, a second REX prefix
115            will be generated (to the assembler, rex64 followed by semicolon
116            is a separate instruction), and hence the 64-bitness is lost. */
117 #if 0
118         /* Using "fxsaveq %0" would be the ideal choice, but is only supported
119            starting with gas 2.16. */
120         __asm__ __volatile__("fxsaveq %0"
121                              : "=m" (tsk->thread.xstate->fxsave));
122 #elif 0
123         /* Using, as a workaround, the properly prefixed form below isn't
124            accepted by any binutils version so far released, complaining that
125            the same type of prefix is used twice if an extended register is
126            needed for addressing (fix submitted to mainline 2005-11-21). */
127         __asm__ __volatile__("rex64/fxsave %0"
128                              : "=m" (tsk->thread.xstate->fxsave));
129 #else
130         /* This, however, we can work around by forcing the compiler to select
131            an addressing mode that doesn't require extended registers. */
132         __asm__ __volatile__("rex64/fxsave (%1)"
133                              : "=m" (tsk->thread.xstate->fxsave)
134                              : "cdaSDb" (&tsk->thread.xstate->fxsave));
135 #endif
136         clear_fpu_state(&tsk->thread.xstate->fxsave);
137         task_thread_info(tsk)->status &= ~TS_USEDFPU;
138 }
139
140 /*
141  * Signal frame handlers.
142  */
143
144 static inline int save_i387(struct _fpstate __user *buf)
145 {
146         struct task_struct *tsk = current;
147         int err = 0;
148
149         BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
150                         sizeof(tsk->thread.xstate->fxsave));
151
152         if ((unsigned long)buf % 16)
153                 printk("save_i387: bad fpstate %p\n", buf);
154
155         if (!used_math())
156                 return 0;
157         clear_used_math(); /* trigger finit */
158         if (task_thread_info(tsk)->status & TS_USEDFPU) {
159                 err = save_i387_checking((struct i387_fxsave_struct __user *)
160                                          buf);
161                 if (err)
162                         return err;
163                 task_thread_info(tsk)->status &= ~TS_USEDFPU;
164                 stts();
165         } else {
166                 if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
167                                    sizeof(struct i387_fxsave_struct)))
168                         return -1;
169         }
170         return 1;
171 }
172
173 /*
174  * This restores directly out of user space. Exceptions are handled.
175  */
176 static inline int restore_i387(struct _fpstate __user *buf)
177 {
178         struct task_struct *tsk = current;
179         int err;
180
181         if (!used_math()) {
182                 err = init_fpu(tsk);
183                 if (err)
184                         return err;
185         }
186
187         if (!(task_thread_info(current)->status & TS_USEDFPU)) {
188                 clts();
189                 task_thread_info(current)->status |= TS_USEDFPU;
190         }
191         return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
192 }
193
194 #else  /* CONFIG_X86_32 */
195
196 static inline void tolerant_fwait(void)
197 {
198         asm volatile("fnclex ; fwait");
199 }
200
201 static inline void restore_fpu(struct task_struct *tsk)
202 {
203         /*
204          * The "nop" is needed to make the instructions the same
205          * length.
206          */
207         alternative_input(
208                 "nop ; frstor %1",
209                 "fxrstor %1",
210                 X86_FEATURE_FXSR,
211                 "m" (tsk->thread.xstate->fxsave));
212 }
213
214 /* We need a safe address that is cheap to find and that is already
215    in L1 during context switch. The best choices are unfortunately
216    different for UP and SMP */
217 #ifdef CONFIG_SMP
218 #define safe_address (__per_cpu_offset[0])
219 #else
220 #define safe_address (kstat_cpu(0).cpustat.user)
221 #endif
222
223 /*
224  * These must be called with preempt disabled
225  */
226 static inline void __save_init_fpu(struct task_struct *tsk)
227 {
228         /* Use more nops than strictly needed in case the compiler
229            varies code */
230         alternative_input(
231                 "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
232                 "fxsave %[fx]\n"
233                 "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
234                 X86_FEATURE_FXSR,
235                 [fx] "m" (tsk->thread.xstate->fxsave),
236                 [fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
237         /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
238            is pending.  Clear the x87 state here by setting it to fixed
239            values. safe_address is a random variable that should be in L1 */
240         alternative_input(
241                 GENERIC_NOP8 GENERIC_NOP2,
242                 "emms\n\t"              /* clear stack tags */
243                 "fildl %[addr]",        /* set F?P to defined value */
244                 X86_FEATURE_FXSAVE_LEAK,
245                 [addr] "m" (safe_address));
246         task_thread_info(tsk)->status &= ~TS_USEDFPU;
247 }
248
249 /*
250  * Signal frame handlers...
251  */
252 extern int save_i387(struct _fpstate __user *buf);
253 extern int restore_i387(struct _fpstate __user *buf);
254
255 #endif  /* CONFIG_X86_64 */
256
257 static inline void __unlazy_fpu(struct task_struct *tsk)
258 {
259         if (task_thread_info(tsk)->status & TS_USEDFPU) {
260                 __save_init_fpu(tsk);
261                 stts();
262         } else
263                 tsk->fpu_counter = 0;
264 }
265
266 static inline void __clear_fpu(struct task_struct *tsk)
267 {
268         if (task_thread_info(tsk)->status & TS_USEDFPU) {
269                 tolerant_fwait();
270                 task_thread_info(tsk)->status &= ~TS_USEDFPU;
271                 stts();
272         }
273 }
274
275 static inline void kernel_fpu_begin(void)
276 {
277         struct thread_info *me = current_thread_info();
278         preempt_disable();
279         if (me->status & TS_USEDFPU)
280                 __save_init_fpu(me->task);
281         else
282                 clts();
283 }
284
285 static inline void kernel_fpu_end(void)
286 {
287         stts();
288         preempt_enable();
289 }
290
291 #ifdef CONFIG_X86_64
292
293 static inline void save_init_fpu(struct task_struct *tsk)
294 {
295         __save_init_fpu(tsk);
296         stts();
297 }
298
299 #define unlazy_fpu      __unlazy_fpu
300 #define clear_fpu       __clear_fpu
301
302 #else  /* CONFIG_X86_32 */
303
304 /*
305  * These disable preemption on their own and are safe
306  */
307 static inline void save_init_fpu(struct task_struct *tsk)
308 {
309         preempt_disable();
310         __save_init_fpu(tsk);
311         stts();
312         preempt_enable();
313 }
314
315 static inline void unlazy_fpu(struct task_struct *tsk)
316 {
317         preempt_disable();
318         __unlazy_fpu(tsk);
319         preempt_enable();
320 }
321
322 static inline void clear_fpu(struct task_struct *tsk)
323 {
324         preempt_disable();
325         __clear_fpu(tsk);
326         preempt_enable();
327 }
328
329 #endif  /* CONFIG_X86_64 */
330
331 /*
332  * i387 state interaction
333  */
334 static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
335 {
336         if (cpu_has_fxsr) {
337                 return tsk->thread.xstate->fxsave.cwd;
338         } else {
339                 return (unsigned short)tsk->thread.xstate->fsave.cwd;
340         }
341 }
342
343 static inline unsigned short get_fpu_swd(struct task_struct *tsk)
344 {
345         if (cpu_has_fxsr) {
346                 return tsk->thread.xstate->fxsave.swd;
347         } else {
348                 return (unsigned short)tsk->thread.xstate->fsave.swd;
349         }
350 }
351
352 static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
353 {
354         if (cpu_has_xmm) {
355                 return tsk->thread.xstate->fxsave.mxcsr;
356         } else {
357                 return MXCSR_DEFAULT;
358         }
359 }
360
361 #endif  /* _ASM_X86_I387_H */