a64b4d425dab3c4b6041422464da182ed3713009
[safe/jmp/linux-2.6] / include / asm-powerpc / paca.h
1 /*
2  * include/asm-powerpc/paca.h
3  *
4  * This control block defines the PACA which defines the processor
5  * specific data for each logical processor on the system.
6  * There are some pointers defined that are utilized by PLIC.
7  *
8  * C 2001 PPC 64 Team, IBM Corp
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version
13  * 2 of the License, or (at your option) any later version.
14  */
15 #ifndef _ASM_POWERPC_PACA_H
16 #define _ASM_POWERPC_PACA_H
17 #ifdef __KERNEL__
18
19 #include        <linux/config.h>
20 #include        <asm/types.h>
21 #include        <asm/lppaca.h>
22 #include        <asm/mmu.h>
23
24 register struct paca_struct *local_paca asm("r13");
25 #define get_paca()      local_paca
26
27 struct task_struct;
28
29 /*
30  * Defines the layout of the paca.
31  *
32  * This structure is not directly accessed by firmware or the service
33  * processor except for the first two pointers that point to the
34  * lppaca area and the ItLpRegSave area for this CPU.  The lppaca
35  * object is currently contained within the PACA but it doesn't need
36  * to be.
37  */
38 struct paca_struct {
39         /*
40          * Because hw_cpu_id, unlike other paca fields, is accessed
41          * routinely from other CPUs (from the IRQ code), we stick to
42          * read-only (after boot) fields in the first cacheline to
43          * avoid cacheline bouncing.
44          */
45
46         /*
47          * MAGIC: These first two pointers can't be moved - they're
48          * accessed by the firmware
49          */
50         struct lppaca *lppaca_ptr;      /* Pointer to LpPaca for PLIC */
51 #ifdef CONFIG_PPC_ISERIES
52         void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
53 #endif /* CONFIG_PPC_ISERIES */
54
55         /*
56          * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
57          * load lock_token and paca_index with a single lwz
58          * instruction.  They must travel together and be properly
59          * aligned.
60          */
61         u16 lock_token;                 /* Constant 0x8000, used in locks */
62         u16 paca_index;                 /* Logical processor number */
63
64         u64 kernel_toc;                 /* Kernel TOC address */
65         u64 stab_real;                  /* Absolute address of segment table */
66         u64 stab_addr;                  /* Virtual address of segment table */
67         void *emergency_sp;             /* pointer to emergency stack */
68         u64 data_offset;                /* per cpu data offset */
69         s16 hw_cpu_id;                  /* Physical processor number */
70         u8 cpu_start;                   /* At startup, processor spins until */
71                                         /* this becomes non-zero. */
72
73         /*
74          * Now, starting in cacheline 2, the exception save areas
75          */
76         /* used for most interrupts/exceptions */
77         u64 exgen[10] __attribute__((aligned(0x80)));
78         u64 exmc[10];           /* used for machine checks */
79         u64 exslb[10];          /* used for SLB/segment table misses
80                                  * on the linear mapping */
81 #ifdef CONFIG_PPC_64K_PAGES
82         pgd_t *pgdir;
83 #endif /* CONFIG_PPC_64K_PAGES */
84
85         mm_context_t context;
86         u16 slb_cache[SLB_CACHE_ENTRIES];
87         u16 slb_cache_ptr;
88
89         /*
90          * then miscellaneous read-write fields
91          */
92         struct task_struct *__current;  /* Pointer to current */
93         u64 kstack;                     /* Saved Kernel stack addr */
94         u64 stab_rr;                    /* stab/slb round-robin counter */
95         u64 saved_r1;                   /* r1 save for RTAS calls */
96         u64 saved_msr;                  /* MSR saved here by enter_rtas */
97         u8 proc_enabled;                /* irq soft-enable flag */
98
99         /*
100          * iSeries structure which the hypervisor knows about -
101          * this structure should not cross a page boundary.
102          * The vpa_init/register_vpa call is now known to fail if the
103          * lppaca structure crosses a page boundary.
104          * The lppaca is also used on POWER5 pSeries boxes.
105          * The lppaca is 640 bytes long, and cannot readily change
106          * since the hypervisor knows its layout, so a 1kB
107          * alignment will suffice to ensure that it doesn't
108          * cross a page boundary.
109          */
110         struct lppaca lppaca __attribute__((__aligned__(0x400)));
111 };
112
113 extern struct paca_struct paca[];
114
115 #endif /* __KERNEL__ */
116 #endif /* _ASM_POWERPC_PACA_H */