2 * "splice": joining two ropes together by interweaving their strands.
4 * This is the "extended pipe" functionality, where a pipe is used as
5 * an arbitrary in-memory buffer. Think of a pipe as a small kernel
6 * buffer that you can use to transfer data from one end to the other.
8 * The traditional unix read/write is extended with a "splice()" operation
9 * that transfers data buffers to or from a pipe buffer.
11 * Named by Larry McVoy, original implementation from Linus, extended by
12 * Jens to support splicing to files, network, direct splicing, etc and
13 * fixing lots of bugs.
15 * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
16 * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
17 * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
21 #include <linux/file.h>
22 #include <linux/pagemap.h>
23 #include <linux/splice.h>
24 #include <linux/mm_inline.h>
25 #include <linux/swap.h>
26 #include <linux/writeback.h>
27 #include <linux/buffer_head.h>
28 #include <linux/module.h>
29 #include <linux/syscalls.h>
30 #include <linux/uio.h>
31 #include <linux/security.h>
34 * Attempt to steal a page from a pipe buffer. This should perhaps go into
35 * a vm helper function, it's already simplified quite a bit by the
36 * addition of remove_mapping(). If success is returned, the caller may
37 * attempt to reuse this page for another destination.
39 static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
40 struct pipe_buffer *buf)
42 struct page *page = buf->page;
43 struct address_space *mapping;
47 mapping = page_mapping(page);
49 WARN_ON(!PageUptodate(page));
52 * At least for ext2 with nobh option, we need to wait on
53 * writeback completing on this page, since we'll remove it
54 * from the pagecache. Otherwise truncate wont wait on the
55 * page, allowing the disk blocks to be reused by someone else
56 * before we actually wrote our data to them. fs corruption
59 wait_on_page_writeback(page);
61 if (PagePrivate(page))
62 try_to_release_page(page, GFP_KERNEL);
65 * If we succeeded in removing the mapping, set LRU flag
68 if (remove_mapping(mapping, page)) {
69 buf->flags |= PIPE_BUF_FLAG_LRU;
75 * Raced with truncate or failed to remove page from current
76 * address space, unlock and return failure.
82 static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
83 struct pipe_buffer *buf)
85 page_cache_release(buf->page);
86 buf->flags &= ~PIPE_BUF_FLAG_LRU;
90 * Check whether the contents of buf is OK to access. Since the content
91 * is a page cache page, IO may be in flight.
93 static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
94 struct pipe_buffer *buf)
96 struct page *page = buf->page;
99 if (!PageUptodate(page)) {
103 * Page got truncated/unhashed. This will cause a 0-byte
104 * splice, if this is the first page.
106 if (!page->mapping) {
112 * Uh oh, read-error from disk.
114 if (!PageUptodate(page)) {
120 * Page is ok afterall, we are done.
131 static const struct pipe_buf_operations page_cache_pipe_buf_ops = {
133 .map = generic_pipe_buf_map,
134 .unmap = generic_pipe_buf_unmap,
135 .confirm = page_cache_pipe_buf_confirm,
136 .release = page_cache_pipe_buf_release,
137 .steal = page_cache_pipe_buf_steal,
138 .get = generic_pipe_buf_get,
141 static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
142 struct pipe_buffer *buf)
144 if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
147 buf->flags |= PIPE_BUF_FLAG_LRU;
148 return generic_pipe_buf_steal(pipe, buf);
151 static const struct pipe_buf_operations user_page_pipe_buf_ops = {
153 .map = generic_pipe_buf_map,
154 .unmap = generic_pipe_buf_unmap,
155 .confirm = generic_pipe_buf_confirm,
156 .release = page_cache_pipe_buf_release,
157 .steal = user_page_pipe_buf_steal,
158 .get = generic_pipe_buf_get,
162 * splice_to_pipe - fill passed data into a pipe
163 * @pipe: pipe to fill
167 * @spd contains a map of pages and len/offset tupples, a long with
168 * the struct pipe_buf_operations associated with these pages. This
169 * function will link that data to the pipe.
172 ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
173 struct splice_pipe_desc *spd)
175 unsigned int spd_pages = spd->nr_pages;
176 int ret, do_wakeup, page_nr;
183 mutex_lock(&pipe->inode->i_mutex);
186 if (!pipe->readers) {
187 send_sig(SIGPIPE, current, 0);
193 if (pipe->nrbufs < PIPE_BUFFERS) {
194 int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1);
195 struct pipe_buffer *buf = pipe->bufs + newbuf;
197 buf->page = spd->pages[page_nr];
198 buf->offset = spd->partial[page_nr].offset;
199 buf->len = spd->partial[page_nr].len;
200 buf->private = spd->partial[page_nr].private;
202 if (spd->flags & SPLICE_F_GIFT)
203 buf->flags |= PIPE_BUF_FLAG_GIFT;
212 if (!--spd->nr_pages)
214 if (pipe->nrbufs < PIPE_BUFFERS)
220 if (spd->flags & SPLICE_F_NONBLOCK) {
226 if (signal_pending(current)) {
234 if (waitqueue_active(&pipe->wait))
235 wake_up_interruptible_sync(&pipe->wait);
236 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
240 pipe->waiting_writers++;
242 pipe->waiting_writers--;
246 mutex_unlock(&pipe->inode->i_mutex);
250 if (waitqueue_active(&pipe->wait))
251 wake_up_interruptible(&pipe->wait);
252 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
256 while (page_nr < spd_pages)
257 page_cache_release(spd->pages[page_nr++]);
263 __generic_file_splice_read(struct file *in, loff_t *ppos,
264 struct pipe_inode_info *pipe, size_t len,
267 struct address_space *mapping = in->f_mapping;
268 unsigned int loff, nr_pages;
269 struct page *pages[PIPE_BUFFERS];
270 struct partial_page partial[PIPE_BUFFERS];
272 pgoff_t index, end_index;
275 struct splice_pipe_desc spd = {
279 .ops = &page_cache_pipe_buf_ops,
282 index = *ppos >> PAGE_CACHE_SHIFT;
283 loff = *ppos & ~PAGE_CACHE_MASK;
284 nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
286 if (nr_pages > PIPE_BUFFERS)
287 nr_pages = PIPE_BUFFERS;
290 * Don't try to 2nd guess the read-ahead logic, call into
291 * page_cache_readahead() like the page cache reads would do.
293 page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);
296 * Lookup the (hopefully) full range of pages we need.
298 spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
301 * If find_get_pages_contig() returned fewer pages than we needed,
302 * allocate the rest and fill in the holes.
305 index += spd.nr_pages;
306 while (spd.nr_pages < nr_pages) {
308 * Page could be there, find_get_pages_contig() breaks on
311 page = find_get_page(mapping, index);
314 * Make sure the read-ahead engine is notified
315 * about this failure.
317 handle_ra_miss(mapping, &in->f_ra, index);
320 * page didn't exist, allocate one.
322 page = page_cache_alloc_cold(mapping);
326 error = add_to_page_cache_lru(page, mapping, index,
328 if (unlikely(error)) {
329 page_cache_release(page);
330 if (error == -EEXIST)
335 * add_to_page_cache() locks the page, unlock it
336 * to avoid convoluting the logic below even more.
341 pages[spd.nr_pages++] = page;
346 * Now loop over the map and see if we need to start IO on any
347 * pages, fill in the partial map, etc.
349 index = *ppos >> PAGE_CACHE_SHIFT;
350 nr_pages = spd.nr_pages;
352 for (page_nr = 0; page_nr < nr_pages; page_nr++) {
353 unsigned int this_len;
359 * this_len is the max we'll use from this page
361 this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
362 page = pages[page_nr];
365 * If the page isn't uptodate, we may need to start io on it
367 if (!PageUptodate(page)) {
369 * If in nonblock mode then dont block on waiting
370 * for an in-flight io page
372 if (flags & SPLICE_F_NONBLOCK) {
373 if (TestSetPageLocked(page))
379 * page was truncated, stop here. if this isn't the
380 * first page, we'll just complete what we already
383 if (!page->mapping) {
388 * page was already under io and is now done, great
390 if (PageUptodate(page)) {
396 * need to read in the page
398 error = mapping->a_ops->readpage(in, page);
399 if (unlikely(error)) {
401 * We really should re-lookup the page here,
402 * but it complicates things a lot. Instead
403 * lets just do what we already stored, and
404 * we'll get it the next time we are called.
406 if (error == AOP_TRUNCATED_PAGE)
414 * i_size must be checked after PageUptodate.
416 isize = i_size_read(mapping->host);
417 end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
418 if (unlikely(!isize || index > end_index))
422 * if this is the last page, see if we need to shrink
423 * the length and stop
425 if (end_index == index) {
429 * max good bytes in this page
431 plen = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
436 * force quit after adding this page
438 this_len = min(this_len, plen - loff);
442 partial[page_nr].offset = loff;
443 partial[page_nr].len = this_len;
451 * Release any pages at the end, if we quit early. 'page_nr' is how far
452 * we got, 'nr_pages' is how many pages are in the map.
454 while (page_nr < nr_pages)
455 page_cache_release(pages[page_nr++]);
458 return splice_to_pipe(pipe, &spd);
464 * generic_file_splice_read - splice data from file to a pipe
465 * @in: file to splice from
466 * @ppos: position in @in
467 * @pipe: pipe to splice to
468 * @len: number of bytes to splice
469 * @flags: splice modifier flags
472 * Will read pages from given file and fill them into a pipe. Can be
473 * used as long as the address_space operations for the source implements
477 ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
478 struct pipe_inode_info *pipe, size_t len,
485 isize = i_size_read(in->f_mapping->host);
486 if (unlikely(*ppos >= isize))
489 left = isize - *ppos;
490 if (unlikely(left < len))
496 ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
503 if (flags & SPLICE_F_NONBLOCK) {
520 EXPORT_SYMBOL(generic_file_splice_read);
523 * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
524 * using sendpage(). Return the number of bytes sent.
526 static int pipe_to_sendpage(struct pipe_inode_info *pipe,
527 struct pipe_buffer *buf, struct splice_desc *sd)
529 struct file *file = sd->u.file;
530 loff_t pos = sd->pos;
533 ret = buf->ops->confirm(pipe, buf);
535 more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
537 ret = file->f_op->sendpage(file, buf->page, buf->offset,
538 sd->len, &pos, more);
545 * This is a little more tricky than the file -> pipe splicing. There are
546 * basically three cases:
548 * - Destination page already exists in the address space and there
549 * are users of it. For that case we have no other option that
550 * copying the data. Tough luck.
551 * - Destination page already exists in the address space, but there
552 * are no users of it. Make sure it's uptodate, then drop it. Fall
553 * through to last case.
554 * - Destination page does not exist, we can add the pipe page to
555 * the page cache and avoid the copy.
557 * If asked to move pages to the output file (SPLICE_F_MOVE is set in
558 * sd->flags), we attempt to migrate pages from the pipe to the output
559 * file address space page cache. This is possible if no one else has
560 * the pipe page referenced outside of the pipe and page cache. If
561 * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
562 * a new page in the output file page cache and fill/dirty that.
564 static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
565 struct splice_desc *sd)
567 struct file *file = sd->u.file;
568 struct address_space *mapping = file->f_mapping;
569 unsigned int offset, this_len;
575 * make sure the data in this buffer is uptodate
577 ret = buf->ops->confirm(pipe, buf);
581 index = sd->pos >> PAGE_CACHE_SHIFT;
582 offset = sd->pos & ~PAGE_CACHE_MASK;
585 if (this_len + offset > PAGE_CACHE_SIZE)
586 this_len = PAGE_CACHE_SIZE - offset;
589 page = find_lock_page(mapping, index);
592 page = page_cache_alloc_cold(mapping);
597 * This will also lock the page
599 ret = add_to_page_cache_lru(page, mapping, index,
605 ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
607 loff_t isize = i_size_read(mapping->host);
609 if (ret != AOP_TRUNCATED_PAGE)
611 page_cache_release(page);
612 if (ret == AOP_TRUNCATED_PAGE)
616 * prepare_write() may have instantiated a few blocks
617 * outside i_size. Trim these off again.
619 if (sd->pos + this_len > isize)
620 vmtruncate(mapping->host, isize);
625 if (buf->page != page) {
627 * Careful, ->map() uses KM_USER0!
629 char *src = buf->ops->map(pipe, buf, 1);
630 char *dst = kmap_atomic(page, KM_USER1);
632 memcpy(dst + offset, src + buf->offset, this_len);
633 flush_dcache_page(page);
634 kunmap_atomic(dst, KM_USER1);
635 buf->ops->unmap(pipe, buf, src);
638 ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
640 if (ret == AOP_TRUNCATED_PAGE) {
641 page_cache_release(page);
647 * Partial write has happened, so 'ret' already initialized by
648 * number of bytes written, Where is nothing we have to do here.
653 * Return the number of bytes written and mark page as
654 * accessed, we are now done!
656 mark_page_accessed(page);
658 page_cache_release(page);
665 * __splice_from_pipe - splice data from a pipe to given actor
666 * @pipe: pipe to splice from
667 * @sd: information to @actor
668 * @actor: handler that splices the data
671 * This function does little more than loop over the pipe and call
672 * @actor to do the actual moving of a single struct pipe_buffer to
673 * the desired destination. See pipe_to_file, pipe_to_sendpage, or
677 ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
680 int ret, do_wakeup, err;
687 struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
688 const struct pipe_buf_operations *ops = buf->ops;
691 if (sd->len > sd->total_len)
692 sd->len = sd->total_len;
694 err = actor(pipe, buf, sd);
696 if (!ret && err != -ENODATA)
708 sd->total_len -= err;
714 ops->release(pipe, buf);
715 pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
729 if (!pipe->waiting_writers) {
734 if (sd->flags & SPLICE_F_NONBLOCK) {
740 if (signal_pending(current)) {
748 if (waitqueue_active(&pipe->wait))
749 wake_up_interruptible_sync(&pipe->wait);
750 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
759 if (waitqueue_active(&pipe->wait))
760 wake_up_interruptible(&pipe->wait);
761 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
766 EXPORT_SYMBOL(__splice_from_pipe);
769 * splice_from_pipe - splice data from a pipe to a file
770 * @pipe: pipe to splice from
771 * @out: file to splice to
772 * @ppos: position in @out
773 * @len: how many bytes to splice
774 * @flags: splice modifier flags
775 * @actor: handler that splices the data
778 * See __splice_from_pipe. This function locks the input and output inodes,
779 * otherwise it's identical to __splice_from_pipe().
782 ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
783 loff_t *ppos, size_t len, unsigned int flags,
787 struct inode *inode = out->f_mapping->host;
788 struct splice_desc sd = {
796 * The actor worker might be calling ->prepare_write and
797 * ->commit_write. Most of the time, these expect i_mutex to
798 * be held. Since this may result in an ABBA deadlock with
799 * pipe->inode, we have to order lock acquiry here.
801 inode_double_lock(inode, pipe->inode);
802 ret = __splice_from_pipe(pipe, &sd, actor);
803 inode_double_unlock(inode, pipe->inode);
809 * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
811 * @out: file to write to
812 * @ppos: position in @out
813 * @len: number of bytes to splice
814 * @flags: splice modifier flags
817 * Will either move or copy pages (determined by @flags options) from
818 * the given pipe inode to the given file. The caller is responsible
819 * for acquiring i_mutex on both inodes.
823 generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
824 loff_t *ppos, size_t len, unsigned int flags)
826 struct address_space *mapping = out->f_mapping;
827 struct inode *inode = mapping->host;
828 struct splice_desc sd = {
837 err = remove_suid(out->f_path.dentry);
841 ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
843 unsigned long nr_pages;
846 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
849 * If file or inode is SYNC and we actually wrote some data,
852 if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
853 err = generic_osync_inode(inode, mapping,
854 OSYNC_METADATA|OSYNC_DATA);
859 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
865 EXPORT_SYMBOL(generic_file_splice_write_nolock);
868 * generic_file_splice_write - splice data from a pipe to a file
870 * @out: file to write to
871 * @ppos: position in @out
872 * @len: number of bytes to splice
873 * @flags: splice modifier flags
876 * Will either move or copy pages (determined by @flags options) from
877 * the given pipe inode to the given file.
881 generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
882 loff_t *ppos, size_t len, unsigned int flags)
884 struct address_space *mapping = out->f_mapping;
885 struct inode *inode = mapping->host;
889 err = should_remove_suid(out->f_path.dentry);
891 mutex_lock(&inode->i_mutex);
892 err = __remove_suid(out->f_path.dentry, err);
893 mutex_unlock(&inode->i_mutex);
898 ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
900 unsigned long nr_pages;
903 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
906 * If file or inode is SYNC and we actually wrote some data,
909 if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
910 mutex_lock(&inode->i_mutex);
911 err = generic_osync_inode(inode, mapping,
912 OSYNC_METADATA|OSYNC_DATA);
913 mutex_unlock(&inode->i_mutex);
918 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
924 EXPORT_SYMBOL(generic_file_splice_write);
927 * generic_splice_sendpage - splice data from a pipe to a socket
928 * @pipe: pipe to splice from
929 * @out: socket to write to
930 * @ppos: position in @out
931 * @len: number of bytes to splice
932 * @flags: splice modifier flags
935 * Will send @len bytes from the pipe to a network socket. No data copying
939 ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
940 loff_t *ppos, size_t len, unsigned int flags)
942 return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
945 EXPORT_SYMBOL(generic_splice_sendpage);
948 * Attempt to initiate a splice from pipe to file.
950 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
951 loff_t *ppos, size_t len, unsigned int flags)
955 if (unlikely(!out->f_op || !out->f_op->splice_write))
958 if (unlikely(!(out->f_mode & FMODE_WRITE)))
961 ret = rw_verify_area(WRITE, out, ppos, len);
962 if (unlikely(ret < 0))
965 ret = security_file_permission(out, MAY_WRITE);
966 if (unlikely(ret < 0))
969 return out->f_op->splice_write(pipe, out, ppos, len, flags);
973 * Attempt to initiate a splice from a file to a pipe.
975 static long do_splice_to(struct file *in, loff_t *ppos,
976 struct pipe_inode_info *pipe, size_t len,
981 if (unlikely(!in->f_op || !in->f_op->splice_read))
984 if (unlikely(!(in->f_mode & FMODE_READ)))
987 ret = rw_verify_area(READ, in, ppos, len);
988 if (unlikely(ret < 0))
991 ret = security_file_permission(in, MAY_READ);
992 if (unlikely(ret < 0))
995 return in->f_op->splice_read(in, ppos, pipe, len, flags);
999 * splice_direct_to_actor - splices data directly between two non-pipes
1000 * @in: file to splice from
1001 * @sd: actor information on where to splice to
1002 * @actor: handles the data splicing
1005 * This is a special case helper to splice directly between two
1006 * points, without requiring an explicit pipe. Internally an allocated
1007 * pipe is cached in the process, and reused during the life time of
1011 ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
1012 splice_direct_actor *actor)
1014 struct pipe_inode_info *pipe;
1021 * We require the input being a regular file, as we don't want to
1022 * randomly drop data for eg socket -> socket splicing. Use the
1023 * piped splicing for that!
1025 i_mode = in->f_path.dentry->d_inode->i_mode;
1026 if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
1030 * neither in nor out is a pipe, setup an internal pipe attached to
1031 * 'out' and transfer the wanted data from 'in' to 'out' through that
1033 pipe = current->splice_pipe;
1034 if (unlikely(!pipe)) {
1035 pipe = alloc_pipe_info(NULL);
1040 * We don't have an immediate reader, but we'll read the stuff
1041 * out of the pipe right after the splice_to_pipe(). So set
1042 * PIPE_READERS appropriately.
1046 current->splice_pipe = pipe;
1054 len = sd->total_len;
1058 * Don't block on output, we have to drain the direct pipe.
1060 sd->flags &= ~SPLICE_F_NONBLOCK;
1063 size_t read_len, max_read_len;
1066 * Do at most PIPE_BUFFERS pages worth of transfer:
1068 max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE));
1070 ret = do_splice_to(in, &sd->pos, pipe, max_read_len, flags);
1071 if (unlikely(ret < 0))
1075 sd->total_len = read_len;
1078 * NOTE: nonblocking mode only applies to the input. We
1079 * must not do the output in nonblocking mode as then we
1080 * could get stuck data in the internal pipe:
1082 ret = actor(pipe, sd);
1083 if (unlikely(ret < 0))
1090 * In nonblocking mode, if we got back a short read then
1091 * that was due to either an IO error or due to the
1092 * pagecache entry not being there. In the IO error case
1093 * the _next_ splice attempt will produce a clean IO error
1094 * return value (not a short read), so in both cases it's
1095 * correct to break out of the loop here:
1097 if ((flags & SPLICE_F_NONBLOCK) && (read_len < max_read_len))
1101 pipe->nrbufs = pipe->curbuf = 0;
1107 * If we did an incomplete transfer we must release
1108 * the pipe buffers in question:
1110 for (i = 0; i < PIPE_BUFFERS; i++) {
1111 struct pipe_buffer *buf = pipe->bufs + i;
1114 buf->ops->release(pipe, buf);
1118 pipe->nrbufs = pipe->curbuf = 0;
1121 * If we transferred some data, return the number of bytes:
1129 EXPORT_SYMBOL(splice_direct_to_actor);
1131 static int direct_splice_actor(struct pipe_inode_info *pipe,
1132 struct splice_desc *sd)
1134 struct file *file = sd->u.file;
1136 return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
1140 * do_splice_direct - splices data directly between two files
1141 * @in: file to splice from
1142 * @ppos: input file offset
1143 * @out: file to splice to
1144 * @len: number of bytes to splice
1145 * @flags: splice modifier flags
1148 * For use by do_sendfile(). splice can easily emulate sendfile, but
1149 * doing it in the application would incur an extra system call
1150 * (splice in + splice out, as compared to just sendfile()). So this helper
1151 * can splice directly through a process-private pipe.
1154 long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
1155 size_t len, unsigned int flags)
1157 struct splice_desc sd = {
1166 ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
1172 * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
1173 * location, so checking ->i_pipe is not enough to verify that this is a
1176 static inline struct pipe_inode_info *pipe_info(struct inode *inode)
1178 if (S_ISFIFO(inode->i_mode))
1179 return inode->i_pipe;
1185 * Determine where to splice to/from.
1187 static long do_splice(struct file *in, loff_t __user *off_in,
1188 struct file *out, loff_t __user *off_out,
1189 size_t len, unsigned int flags)
1191 struct pipe_inode_info *pipe;
1192 loff_t offset, *off;
1195 pipe = pipe_info(in->f_path.dentry->d_inode);
1200 if (out->f_op->llseek == no_llseek)
1202 if (copy_from_user(&offset, off_out, sizeof(loff_t)))
1208 ret = do_splice_from(pipe, out, off, len, flags);
1210 if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
1216 pipe = pipe_info(out->f_path.dentry->d_inode);
1221 if (in->f_op->llseek == no_llseek)
1223 if (copy_from_user(&offset, off_in, sizeof(loff_t)))
1229 ret = do_splice_to(in, off, pipe, len, flags);
1231 if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
1241 * Map an iov into an array of pages and offset/length tupples. With the
1242 * partial_page structure, we can map several non-contiguous ranges into
1243 * our ones pages[] map instead of splitting that operation into pieces.
1244 * Could easily be exported as a generic helper for other users, in which
1245 * case one would probably want to add a 'max_nr_pages' parameter as well.
1247 static int get_iovec_page_array(const struct iovec __user *iov,
1248 unsigned int nr_vecs, struct page **pages,
1249 struct partial_page *partial, int aligned)
1251 int buffers = 0, error = 0;
1254 * It's ok to take the mmap_sem for reading, even
1255 * across a "get_user()".
1257 down_read(¤t->mm->mmap_sem);
1260 unsigned long off, npages;
1266 * Get user address base and length for this iovec.
1268 error = get_user(base, &iov->iov_base);
1269 if (unlikely(error))
1271 error = get_user(len, &iov->iov_len);
1272 if (unlikely(error))
1276 * Sanity check this iovec. 0 read succeeds.
1281 if (unlikely(!base))
1285 * Get this base offset and number of pages, then map
1286 * in the user pages.
1288 off = (unsigned long) base & ~PAGE_MASK;
1291 * If asked for alignment, the offset must be zero and the
1292 * length a multiple of the PAGE_SIZE.
1295 if (aligned && (off || len & ~PAGE_MASK))
1298 npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
1299 if (npages > PIPE_BUFFERS - buffers)
1300 npages = PIPE_BUFFERS - buffers;
1302 error = get_user_pages(current, current->mm,
1303 (unsigned long) base, npages, 0, 0,
1304 &pages[buffers], NULL);
1306 if (unlikely(error <= 0))
1310 * Fill this contiguous range into the partial page map.
1312 for (i = 0; i < error; i++) {
1313 const int plen = min_t(size_t, len, PAGE_SIZE - off);
1315 partial[buffers].offset = off;
1316 partial[buffers].len = plen;
1324 * We didn't complete this iov, stop here since it probably
1325 * means we have to move some of this into a pipe to
1326 * be able to continue.
1332 * Don't continue if we mapped fewer pages than we asked for,
1333 * or if we mapped the max number of pages that we have
1336 if (error < npages || buffers == PIPE_BUFFERS)
1343 up_read(¤t->mm->mmap_sem);
1351 static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
1352 struct splice_desc *sd)
1357 ret = buf->ops->confirm(pipe, buf);
1362 * See if we can use the atomic maps, by prefaulting in the
1363 * pages and doing an atomic copy
1365 if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
1366 src = buf->ops->map(pipe, buf, 1);
1367 ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
1369 buf->ops->unmap(pipe, buf, src);
1377 * No dice, use slow non-atomic map and copy
1379 src = buf->ops->map(pipe, buf, 0);
1382 if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
1387 sd->u.userptr += ret;
1388 buf->ops->unmap(pipe, buf, src);
1393 * For lack of a better implementation, implement vmsplice() to userspace
1394 * as a simple copy of the pipes pages to the user iov.
1396 static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
1397 unsigned long nr_segs, unsigned int flags)
1399 struct pipe_inode_info *pipe;
1400 struct splice_desc sd;
1405 pipe = pipe_info(file->f_path.dentry->d_inode);
1410 mutex_lock(&pipe->inode->i_mutex);
1418 * Get user address base and length for this iovec.
1420 error = get_user(base, &iov->iov_base);
1421 if (unlikely(error))
1423 error = get_user(len, &iov->iov_len);
1424 if (unlikely(error))
1428 * Sanity check this iovec. 0 read succeeds.
1432 if (unlikely(!base)) {
1440 sd.u.userptr = base;
1443 size = __splice_from_pipe(pipe, &sd, pipe_to_user);
1461 mutex_unlock(&pipe->inode->i_mutex);
1470 * vmsplice splices a user address range into a pipe. It can be thought of
1471 * as splice-from-memory, where the regular splice is splice-from-file (or
1472 * to file). In both cases the output is a pipe, naturally.
1474 static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
1475 unsigned long nr_segs, unsigned int flags)
1477 struct pipe_inode_info *pipe;
1478 struct page *pages[PIPE_BUFFERS];
1479 struct partial_page partial[PIPE_BUFFERS];
1480 struct splice_pipe_desc spd = {
1484 .ops = &user_page_pipe_buf_ops,
1487 pipe = pipe_info(file->f_path.dentry->d_inode);
1491 spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial,
1492 flags & SPLICE_F_GIFT);
1493 if (spd.nr_pages <= 0)
1494 return spd.nr_pages;
1496 return splice_to_pipe(pipe, &spd);
1500 * Note that vmsplice only really supports true splicing _from_ user memory
1501 * to a pipe, not the other way around. Splicing from user memory is a simple
1502 * operation that can be supported without any funky alignment restrictions
1503 * or nasty vm tricks. We simply map in the user memory and fill them into
1504 * a pipe. The reverse isn't quite as easy, though. There are two possible
1505 * solutions for that:
1507 * - memcpy() the data internally, at which point we might as well just
1508 * do a regular read() on the buffer anyway.
1509 * - Lots of nasty vm tricks, that are neither fast nor flexible (it
1510 * has restriction limitations on both ends of the pipe).
1512 * Currently we punt and implement it as a normal copy, see pipe_to_user().
1515 asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
1516 unsigned long nr_segs, unsigned int flags)
1522 if (unlikely(nr_segs > UIO_MAXIOV))
1524 else if (unlikely(!nr_segs))
1528 file = fget_light(fd, &fput);
1530 if (file->f_mode & FMODE_WRITE)
1531 error = vmsplice_to_pipe(file, iov, nr_segs, flags);
1532 else if (file->f_mode & FMODE_READ)
1533 error = vmsplice_to_user(file, iov, nr_segs, flags);
1535 fput_light(file, fput);
1541 asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
1542 int fd_out, loff_t __user *off_out,
1543 size_t len, unsigned int flags)
1546 struct file *in, *out;
1547 int fput_in, fput_out;
1553 in = fget_light(fd_in, &fput_in);
1555 if (in->f_mode & FMODE_READ) {
1556 out = fget_light(fd_out, &fput_out);
1558 if (out->f_mode & FMODE_WRITE)
1559 error = do_splice(in, off_in,
1562 fput_light(out, fput_out);
1566 fput_light(in, fput_in);
1573 * Make sure there's data to read. Wait for input if we can, otherwise
1574 * return an appropriate error.
1576 static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1581 * Check ->nrbufs without the inode lock first. This function
1582 * is speculative anyways, so missing one is ok.
1588 mutex_lock(&pipe->inode->i_mutex);
1590 while (!pipe->nrbufs) {
1591 if (signal_pending(current)) {
1597 if (!pipe->waiting_writers) {
1598 if (flags & SPLICE_F_NONBLOCK) {
1606 mutex_unlock(&pipe->inode->i_mutex);
1611 * Make sure there's writeable room. Wait for room if we can, otherwise
1612 * return an appropriate error.
1614 static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1619 * Check ->nrbufs without the inode lock first. This function
1620 * is speculative anyways, so missing one is ok.
1622 if (pipe->nrbufs < PIPE_BUFFERS)
1626 mutex_lock(&pipe->inode->i_mutex);
1628 while (pipe->nrbufs >= PIPE_BUFFERS) {
1629 if (!pipe->readers) {
1630 send_sig(SIGPIPE, current, 0);
1634 if (flags & SPLICE_F_NONBLOCK) {
1638 if (signal_pending(current)) {
1642 pipe->waiting_writers++;
1644 pipe->waiting_writers--;
1647 mutex_unlock(&pipe->inode->i_mutex);
1652 * Link contents of ipipe to opipe.
1654 static int link_pipe(struct pipe_inode_info *ipipe,
1655 struct pipe_inode_info *opipe,
1656 size_t len, unsigned int flags)
1658 struct pipe_buffer *ibuf, *obuf;
1659 int ret = 0, i = 0, nbuf;
1662 * Potential ABBA deadlock, work around it by ordering lock
1663 * grabbing by inode address. Otherwise two different processes
1664 * could deadlock (one doing tee from A -> B, the other from B -> A).
1666 inode_double_lock(ipipe->inode, opipe->inode);
1669 if (!opipe->readers) {
1670 send_sig(SIGPIPE, current, 0);
1677 * If we have iterated all input buffers or ran out of
1678 * output room, break.
1680 if (i >= ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS)
1683 ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
1684 nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
1687 * Get a reference to this pipe buffer,
1688 * so we can copy the contents over.
1690 ibuf->ops->get(ipipe, ibuf);
1692 obuf = opipe->bufs + nbuf;
1696 * Don't inherit the gift flag, we need to
1697 * prevent multiple steals of this page.
1699 obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1701 if (obuf->len > len)
1710 inode_double_unlock(ipipe->inode, opipe->inode);
1713 * If we put data in the output pipe, wakeup any potential readers.
1717 if (waitqueue_active(&opipe->wait))
1718 wake_up_interruptible(&opipe->wait);
1719 kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
1726 * This is a tee(1) implementation that works on pipes. It doesn't copy
1727 * any data, it simply references the 'in' pages on the 'out' pipe.
1728 * The 'flags' used are the SPLICE_F_* variants, currently the only
1729 * applicable one is SPLICE_F_NONBLOCK.
1731 static long do_tee(struct file *in, struct file *out, size_t len,
1734 struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
1735 struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
1739 * Duplicate the contents of ipipe to opipe without actually
1742 if (ipipe && opipe && ipipe != opipe) {
1744 * Keep going, unless we encounter an error. The ipipe/opipe
1745 * ordering doesn't really matter.
1747 ret = link_ipipe_prep(ipipe, flags);
1749 ret = link_opipe_prep(opipe, flags);
1751 ret = link_pipe(ipipe, opipe, len, flags);
1752 if (!ret && (flags & SPLICE_F_NONBLOCK))
1761 asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
1770 in = fget_light(fdin, &fput_in);
1772 if (in->f_mode & FMODE_READ) {
1774 struct file *out = fget_light(fdout, &fput_out);
1777 if (out->f_mode & FMODE_WRITE)
1778 error = do_tee(in, out, len, flags);
1779 fput_light(out, fput_out);
1782 fput_light(in, fput_in);