SAFE public projects git trees. - safe/jmp/linux-2.6/blob - fs/splice.c

   1 /*
   2  * "splice": joining two ropes together by interweaving their strands.
   3  *
   4  * This is the "extended pipe" functionality, where a pipe is used as
   5  * an arbitrary in-memory buffer. Think of a pipe as a small kernel
   6  * buffer that you can use to transfer data from one end to the other.
   7  *
   8  * The traditional unix read/write is extended with a "splice()" operation
   9  * that transfers data buffers to or from a pipe buffer.
  10  *
  11  * Named by Larry McVoy, original implementation from Linus, extended by
  12  * Jens to support splicing to files, network, direct splicing, etc and
  13  * fixing lots of bugs.
  14  *
  15  * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
  16  * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
  17  * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
  18  *
  19  */
  20 #include <linux/fs.h>
  21 #include <linux/file.h>
  22 #include <linux/pagemap.h>
  23 #include <linux/splice.h>
  24 #include <linux/memcontrol.h>
  25 #include <linux/mm_inline.h>
  26 #include <linux/swap.h>
  27 #include <linux/writeback.h>
  28 #include <linux/buffer_head.h>
  29 #include <linux/module.h>
  30 #include <linux/syscalls.h>
  31 #include <linux/uio.h>
  32 #include <linux/security.h>
  33
  34 /*
  35  * Attempt to steal a page from a pipe buffer. This should perhaps go into
  36  * a vm helper function, it's already simplified quite a bit by the
  37  * addition of remove_mapping(). If success is returned, the caller may
  38  * attempt to reuse this page for another destination.
  39  */
  40 static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
  41                                      struct pipe_buffer *buf)
  42 {
  43         struct page *page = buf->page;
  44         struct address_space *mapping;
  45
  46         lock_page(page);
  47
  48         mapping = page_mapping(page);
  49         if (mapping) {
  50                 WARN_ON(!PageUptodate(page));
  51
  52                 /*
  53                  * At least for ext2 with nobh option, we need to wait on
  54                  * writeback completing on this page, since we'll remove it
  55                  * from the pagecache.  Otherwise truncate wont wait on the
  56                  * page, allowing the disk blocks to be reused by someone else
  57                  * before we actually wrote our data to them. fs corruption
  58                  * ensues.
  59                  */
  60                 wait_on_page_writeback(page);
  61
  62                 if (page_has_private(page) &&
  63                     !try_to_release_page(page, GFP_KERNEL))
  64                         goto out_unlock;
  65
  66                 /*
  67                  * If we succeeded in removing the mapping, set LRU flag
  68                  * and return good.
  69                  */
  70                 if (remove_mapping(mapping, page)) {
  71                         buf->flags |= PIPE_BUF_FLAG_LRU;
  72                         return 0;
  73                 }
  74         }
  75
  76         /*
  77          * Raced with truncate or failed to remove page from current
  78          * address space, unlock and return failure.
  79          */
  80 out_unlock:
  81         unlock_page(page);
  82         return 1;
  83 }
  84
  85 static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
  86                                         struct pipe_buffer *buf)
  87 {
  88         page_cache_release(buf->page);
  89         buf->flags &= ~PIPE_BUF_FLAG_LRU;
  90 }
  91
  92 /*
  93  * Check whether the contents of buf is OK to access. Since the content
  94  * is a page cache page, IO may be in flight.
  95  */
  96 static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
  97                                        struct pipe_buffer *buf)
  98 {
  99         struct page *page = buf->page;
 100         int err;
 101
 102         if (!PageUptodate(page)) {
 103                 lock_page(page);
 104
 105                 /*
 106                  * Page got truncated/unhashed. This will cause a 0-byte
 107                  * splice, if this is the first page.
 108                  */
 109                 if (!page->mapping) {
 110                         err = -ENODATA;
 111                         goto error;
 112                 }
 113
 114                 /*
 115                  * Uh oh, read-error from disk.
 116                  */
 117                 if (!PageUptodate(page)) {
 118                         err = -EIO;
 119                         goto error;
 120                 }
 121
 122                 /*
 123                  * Page is ok afterall, we are done.
 124                  */
 125                 unlock_page(page);
 126         }
 127
 128         return 0;
 129 error:
 130         unlock_page(page);
 131         return err;
 132 }
 133
 134 static const struct pipe_buf_operations page_cache_pipe_buf_ops = {
 135         .can_merge = 0,
 136         .map = generic_pipe_buf_map,
 137         .unmap = generic_pipe_buf_unmap,
 138         .confirm = page_cache_pipe_buf_confirm,
 139         .release = page_cache_pipe_buf_release,
 140         .steal = page_cache_pipe_buf_steal,
 141         .get = generic_pipe_buf_get,
 142 };
 143
 144 static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
 145                                     struct pipe_buffer *buf)
 146 {
 147         if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
 148                 return 1;
 149
 150         buf->flags |= PIPE_BUF_FLAG_LRU;
 151         return generic_pipe_buf_steal(pipe, buf);
 152 }
 153
 154 static const struct pipe_buf_operations user_page_pipe_buf_ops = {
 155         .can_merge = 0,
 156         .map = generic_pipe_buf_map,
 157         .unmap = generic_pipe_buf_unmap,
 158         .confirm = generic_pipe_buf_confirm,
 159         .release = page_cache_pipe_buf_release,
 160         .steal = user_page_pipe_buf_steal,
 161         .get = generic_pipe_buf_get,
 162 };
 163
 164 /**
 165  * splice_to_pipe - fill passed data into a pipe
 166  * @pipe:       pipe to fill
 167  * @spd:        data to fill
 168  *
 169  * Description:
 170  *    @spd contains a map of pages and len/offset tuples, along with
 171  *    the struct pipe_buf_operations associated with these pages. This
 172  *    function will link that data to the pipe.
 173  *
 174  */
 175 ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
 176                        struct splice_pipe_desc *spd)
 177 {
 178         unsigned int spd_pages = spd->nr_pages;
 179         int ret, do_wakeup, page_nr;
 180
 181         ret = 0;
 182         do_wakeup = 0;
 183         page_nr = 0;
 184
 185         pipe_lock(pipe);
 186
 187         for (;;) {
 188                 if (!pipe->readers) {
 189                         send_sig(SIGPIPE, current, 0);
 190                         if (!ret)
 191                                 ret = -EPIPE;
 192                         break;
 193                 }
 194
 195                 if (pipe->nrbufs < PIPE_BUFFERS) {
 196                         int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1);
 197                         struct pipe_buffer *buf = pipe->bufs + newbuf;
 198
 199                         buf->page = spd->pages[page_nr];
 200                         buf->offset = spd->partial[page_nr].offset;
 201                         buf->len = spd->partial[page_nr].len;
 202                         buf->private = spd->partial[page_nr].private;
 203                         buf->ops = spd->ops;
 204                         if (spd->flags & SPLICE_F_GIFT)
 205                                 buf->flags |= PIPE_BUF_FLAG_GIFT;
 206
 207                         pipe->nrbufs++;
 208                         page_nr++;
 209                         ret += buf->len;
 210
 211                         if (pipe->inode)
 212                                 do_wakeup = 1;
 213
 214                         if (!--spd->nr_pages)
 215                                 break;
 216                         if (pipe->nrbufs < PIPE_BUFFERS)
 217                                 continue;
 218
 219                         break;
 220                 }
 221
 222                 if (spd->flags & SPLICE_F_NONBLOCK) {
 223                         if (!ret)
 224                                 ret = -EAGAIN;
 225                         break;
 226                 }
 227
 228                 if (signal_pending(current)) {
 229                         if (!ret)
 230                                 ret = -ERESTARTSYS;
 231                         break;
 232                 }
 233
 234                 if (do_wakeup) {
 235                         smp_mb();
 236                         if (waitqueue_active(&pipe->wait))
 237                                 wake_up_interruptible_sync(&pipe->wait);
 238                         kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 239                         do_wakeup = 0;
 240                 }
 241
 242                 pipe->waiting_writers++;
 243                 pipe_wait(pipe);
 244                 pipe->waiting_writers--;
 245         }
 246
 247         pipe_unlock(pipe);
 248
 249         if (do_wakeup) {
 250                 smp_mb();
 251                 if (waitqueue_active(&pipe->wait))
 252                         wake_up_interruptible(&pipe->wait);
 253                 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 254         }
 255
 256         while (page_nr < spd_pages)
 257                 spd->spd_release(spd, page_nr++);
 258
 259         return ret;
 260 }
 261
 262 static void spd_release_page(struct splice_pipe_desc *spd, unsigned int i)
 263 {
 264         page_cache_release(spd->pages[i]);
 265 }
 266
 267 static int
 268 __generic_file_splice_read(struct file *in, loff_t *ppos,
 269                            struct pipe_inode_info *pipe, size_t len,
 270                            unsigned int flags)
 271 {
 272         struct address_space *mapping = in->f_mapping;
 273         unsigned int loff, nr_pages, req_pages;
 274         struct page *pages[PIPE_BUFFERS];
 275         struct partial_page partial[PIPE_BUFFERS];
 276         struct page *page;
 277         pgoff_t index, end_index;
 278         loff_t isize;
 279         int error, page_nr;
 280         struct splice_pipe_desc spd = {
 281                 .pages = pages,
 282                 .partial = partial,
 283                 .flags = flags,
 284                 .ops = &page_cache_pipe_buf_ops,
 285                 .spd_release = spd_release_page,
 286         };
 287
 288         index = *ppos >> PAGE_CACHE_SHIFT;
 289         loff = *ppos & ~PAGE_CACHE_MASK;
 290         req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 291         nr_pages = min(req_pages, (unsigned)PIPE_BUFFERS);
 292
 293         /*
 294          * Lookup the (hopefully) full range of pages we need.
 295          */
 296         spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
 297         index += spd.nr_pages;
 298
 299         /*
 300          * If find_get_pages_contig() returned fewer pages than we needed,
 301          * readahead/allocate the rest and fill in the holes.
 302          */
 303         if (spd.nr_pages < nr_pages)
 304                 page_cache_sync_readahead(mapping, &in->f_ra, in,
 305                                 index, req_pages - spd.nr_pages);
 306
 307         error = 0;
 308         while (spd.nr_pages < nr_pages) {
 309                 /*
 310                  * Page could be there, find_get_pages_contig() breaks on
 311                  * the first hole.
 312                  */
 313                 page = find_get_page(mapping, index);
 314                 if (!page) {
 315                         /*
 316                          * page didn't exist, allocate one.
 317                          */
 318                         page = page_cache_alloc_cold(mapping);
 319                         if (!page)
 320                                 break;
 321
 322                         error = add_to_page_cache_lru(page, mapping, index,
 323                                                 mapping_gfp_mask(mapping));
 324                         if (unlikely(error)) {
 325                                 page_cache_release(page);
 326                                 if (error == -EEXIST)
 327                                         continue;
 328                                 break;
 329                         }
 330                         /*
 331                          * add_to_page_cache() locks the page, unlock it
 332                          * to avoid convoluting the logic below even more.
 333                          */
 334                         unlock_page(page);
 335                 }
 336
 337                 pages[spd.nr_pages++] = page;
 338                 index++;
 339         }
 340
 341         /*
 342          * Now loop over the map and see if we need to start IO on any
 343          * pages, fill in the partial map, etc.
 344          */
 345         index = *ppos >> PAGE_CACHE_SHIFT;
 346         nr_pages = spd.nr_pages;
 347         spd.nr_pages = 0;
 348         for (page_nr = 0; page_nr < nr_pages; page_nr++) {
 349                 unsigned int this_len;
 350
 351                 if (!len)
 352                         break;
 353
 354                 /*
 355                  * this_len is the max we'll use from this page
 356                  */
 357                 this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
 358                 page = pages[page_nr];
 359
 360                 if (PageReadahead(page))
 361                         page_cache_async_readahead(mapping, &in->f_ra, in,
 362                                         page, index, req_pages - page_nr);
 363
 364                 /*
 365                  * If the page isn't uptodate, we may need to start io on it
 366                  */
 367                 if (!PageUptodate(page)) {
 368                         /*
 369                          * If in nonblock mode then dont block on waiting
 370                          * for an in-flight io page
 371                          */
 372                         if (flags & SPLICE_F_NONBLOCK) {
 373                                 if (!trylock_page(page)) {
 374                                         error = -EAGAIN;
 375                                         break;
 376                                 }
 377                         } else
 378                                 lock_page(page);
 379
 380                         /*
 381                          * Page was truncated, or invalidated by the
 382                          * filesystem.  Redo the find/create, but this time the
 383                          * page is kept locked, so there's no chance of another
 384                          * race with truncate/invalidate.
 385                          */
 386                         if (!page->mapping) {
 387                                 unlock_page(page);
 388                                 page = find_or_create_page(mapping, index,
 389                                                 mapping_gfp_mask(mapping));
 390
 391                                 if (!page) {
 392                                         error = -ENOMEM;
 393                                         break;
 394                                 }
 395                                 page_cache_release(pages[page_nr]);
 396                                 pages[page_nr] = page;
 397                         }
 398                         /*
 399                          * page was already under io and is now done, great
 400                          */
 401                         if (PageUptodate(page)) {
 402                                 unlock_page(page);
 403                                 goto fill_it;
 404                         }
 405
 406                         /*
 407                          * need to read in the page
 408                          */
 409                         error = mapping->a_ops->readpage(in, page);
 410                         if (unlikely(error)) {
 411                                 /*
 412                                  * We really should re-lookup the page here,
 413                                  * but it complicates things a lot. Instead
 414                                  * lets just do what we already stored, and
 415                                  * we'll get it the next time we are called.
 416                                  */
 417                                 if (error == AOP_TRUNCATED_PAGE)
 418                                         error = 0;
 419
 420                                 break;
 421                         }
 422                 }
 423 fill_it:
 424                 /*
 425                  * i_size must be checked after PageUptodate.
 426                  */
 427                 isize = i_size_read(mapping->host);
 428                 end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
 429                 if (unlikely(!isize || index > end_index))
 430                         break;
 431
 432                 /*
 433                  * if this is the last page, see if we need to shrink
 434                  * the length and stop
 435                  */
 436                 if (end_index == index) {
 437                         unsigned int plen;
 438
 439                         /*
 440                          * max good bytes in this page
 441                          */
 442                         plen = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
 443                         if (plen <= loff)
 444                                 break;
 445
 446                         /*
 447                          * force quit after adding this page
 448                          */
 449                         this_len = min(this_len, plen - loff);
 450                         len = this_len;
 451                 }
 452
 453                 partial[page_nr].offset = loff;
 454                 partial[page_nr].len = this_len;
 455                 len -= this_len;
 456                 loff = 0;
 457                 spd.nr_pages++;
 458                 index++;
 459         }
 460
 461         /*
 462          * Release any pages at the end, if we quit early. 'page_nr' is how far
 463          * we got, 'nr_pages' is how many pages are in the map.
 464          */
 465         while (page_nr < nr_pages)
 466                 page_cache_release(pages[page_nr++]);
 467         in->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;
 468
 469         if (spd.nr_pages)
 470                 return splice_to_pipe(pipe, &spd);
 471
 472         return error;
 473 }
 474
 475 /**
 476  * generic_file_splice_read - splice data from file to a pipe
 477  * @in:         file to splice from
 478  * @ppos:       position in @in
 479  * @pipe:       pipe to splice to
 480  * @len:        number of bytes to splice
 481  * @flags:      splice modifier flags
 482  *
 483  * Description:
 484  *    Will read pages from given file and fill them into a pipe. Can be
 485  *    used as long as the address_space operations for the source implements
 486  *    a readpage() hook.
 487  *
 488  */
 489 ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
 490                                  struct pipe_inode_info *pipe, size_t len,
 491                                  unsigned int flags)
 492 {
 493         loff_t isize, left;
 494         int ret;
 495
 496         isize = i_size_read(in->f_mapping->host);
 497         if (unlikely(*ppos >= isize))
 498                 return 0;
 499
 500         left = isize - *ppos;
 501         if (unlikely(left < len))
 502                 len = left;
 503
 504         ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
 505         if (ret > 0)
 506                 *ppos += ret;
 507
 508         return ret;
 509 }
 510 EXPORT_SYMBOL(generic_file_splice_read);
 511
 512 static const struct pipe_buf_operations default_pipe_buf_ops = {
 513         .can_merge = 0,
 514         .map = generic_pipe_buf_map,
 515         .unmap = generic_pipe_buf_unmap,
 516         .confirm = generic_pipe_buf_confirm,
 517         .release = generic_pipe_buf_release,
 518         .steal = generic_pipe_buf_steal,
 519         .get = generic_pipe_buf_get,
 520 };
 521
 522 static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
 523                             unsigned long vlen, loff_t offset)
 524 {
 525         mm_segment_t old_fs;
 526         loff_t pos = offset;
 527         ssize_t res;
 528
 529         old_fs = get_fs();
 530         set_fs(get_ds());
 531         /* The cast to a user pointer is valid due to the set_fs() */
 532         res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos);
 533         set_fs(old_fs);
 534
 535         return res;
 536 }
 537
 538 static ssize_t kernel_write(struct file *file, const char *buf, size_t count,
 539                             loff_t pos)
 540 {
 541         mm_segment_t old_fs;
 542         ssize_t res;
 543
 544         old_fs = get_fs();
 545         set_fs(get_ds());
 546         /* The cast to a user pointer is valid due to the set_fs() */
 547         res = vfs_write(file, (const char __user *)buf, count, &pos);
 548         set_fs(old_fs);
 549
 550         return res;
 551 }
 552
 553 ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
 554                                  struct pipe_inode_info *pipe, size_t len,
 555                                  unsigned int flags)
 556 {
 557         unsigned int nr_pages;
 558         unsigned int nr_freed;
 559         size_t offset;
 560         struct page *pages[PIPE_BUFFERS];
 561         struct partial_page partial[PIPE_BUFFERS];
 562         struct iovec vec[PIPE_BUFFERS];
 563         pgoff_t index;
 564         ssize_t res;
 565         size_t this_len;
 566         int error;
 567         int i;
 568         struct splice_pipe_desc spd = {
 569                 .pages = pages,
 570                 .partial = partial,
 571                 .flags = flags,
 572                 .ops = &default_pipe_buf_ops,
 573                 .spd_release = spd_release_page,
 574         };
 575
 576         index = *ppos >> PAGE_CACHE_SHIFT;
 577         offset = *ppos & ~PAGE_CACHE_MASK;
 578         nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 579
 580         for (i = 0; i < nr_pages && i < PIPE_BUFFERS && len; i++) {
 581                 struct page *page;
 582
 583                 page = alloc_page(GFP_USER);
 584                 error = -ENOMEM;
 585                 if (!page)
 586                         goto err;
 587
 588                 this_len = min_t(size_t, len, PAGE_CACHE_SIZE - offset);
 589                 vec[i].iov_base = (void __user *) page_address(page);
 590                 vec[i].iov_len = this_len;
 591                 pages[i] = page;
 592                 spd.nr_pages++;
 593                 len -= this_len;
 594                 offset = 0;
 595         }
 596
 597         res = kernel_readv(in, vec, spd.nr_pages, *ppos);
 598         if (res < 0) {
 599                 error = res;
 600                 goto err;
 601         }
 602
 603         error = 0;
 604         if (!res)
 605                 goto err;
 606
 607         nr_freed = 0;
 608         for (i = 0; i < spd.nr_pages; i++) {
 609                 this_len = min_t(size_t, vec[i].iov_len, res);
 610                 partial[i].offset = 0;
 611                 partial[i].len = this_len;
 612                 if (!this_len) {
 613                         __free_page(pages[i]);
 614                         pages[i] = NULL;
 615                         nr_freed++;
 616                 }
 617                 res -= this_len;
 618         }
 619         spd.nr_pages -= nr_freed;
 620
 621         res = splice_to_pipe(pipe, &spd);
 622         if (res > 0)
 623                 *ppos += res;
 624
 625         return res;
 626
 627 err:
 628         for (i = 0; i < spd.nr_pages; i++)
 629                 __free_page(pages[i]);
 630
 631         return error;
 632 }
 633 EXPORT_SYMBOL(default_file_splice_read);
 634
 635 /*
 636  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
 637  * using sendpage(). Return the number of bytes sent.
 638  */
 639 static int pipe_to_sendpage(struct pipe_inode_info *pipe,
 640                             struct pipe_buffer *buf, struct splice_desc *sd)
 641 {
 642         struct file *file = sd->u.file;
 643         loff_t pos = sd->pos;
 644         int ret, more;
 645
 646         ret = buf->ops->confirm(pipe, buf);
 647         if (!ret) {
 648                 more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
 649
 650                 ret = file->f_op->sendpage(file, buf->page, buf->offset,
 651                                            sd->len, &pos, more);
 652         }
 653
 654         return ret;
 655 }
 656
 657 /*
 658  * This is a little more tricky than the file -> pipe splicing. There are
 659  * basically three cases:
 660  *
 661  *      - Destination page already exists in the address space and there
 662  *        are users of it. For that case we have no other option that
 663  *        copying the data. Tough luck.
 664  *      - Destination page already exists in the address space, but there
 665  *        are no users of it. Make sure it's uptodate, then drop it. Fall
 666  *        through to last case.
 667  *      - Destination page does not exist, we can add the pipe page to
 668  *        the page cache and avoid the copy.
 669  *
 670  * If asked to move pages to the output file (SPLICE_F_MOVE is set in
 671  * sd->flags), we attempt to migrate pages from the pipe to the output
 672  * file address space page cache. This is possible if no one else has
 673  * the pipe page referenced outside of the pipe and page cache. If
 674  * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
 675  * a new page in the output file page cache and fill/dirty that.
 676  */
 677 int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 678                  struct splice_desc *sd)
 679 {
 680         struct file *file = sd->u.file;
 681         struct address_space *mapping = file->f_mapping;
 682         unsigned int offset, this_len;
 683         struct page *page;
 684         void *fsdata;
 685         int ret;
 686
 687         /*
 688          * make sure the data in this buffer is uptodate
 689          */
 690         ret = buf->ops->confirm(pipe, buf);
 691         if (unlikely(ret))
 692                 return ret;
 693
 694         offset = sd->pos & ~PAGE_CACHE_MASK;
 695
 696         this_len = sd->len;
 697         if (this_len + offset > PAGE_CACHE_SIZE)
 698                 this_len = PAGE_CACHE_SIZE - offset;
 699
 700         ret = pagecache_write_begin(file, mapping, sd->pos, this_len,
 701                                 AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata);
 702         if (unlikely(ret))
 703                 goto out;
 704
 705         if (buf->page != page) {
 706                 /*
 707                  * Careful, ->map() uses KM_USER0!
 708                  */
 709                 char *src = buf->ops->map(pipe, buf, 1);
 710                 char *dst = kmap_atomic(page, KM_USER1);
 711
 712                 memcpy(dst + offset, src + buf->offset, this_len);
 713                 flush_dcache_page(page);
 714                 kunmap_atomic(dst, KM_USER1);
 715                 buf->ops->unmap(pipe, buf, src);
 716         }
 717         ret = pagecache_write_end(file, mapping, sd->pos, this_len, this_len,
 718                                 page, fsdata);
 719 out:
 720         return ret;
 721 }
 722 EXPORT_SYMBOL(pipe_to_file);
 723
 724 static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
 725 {
 726         smp_mb();
 727         if (waitqueue_active(&pipe->wait))
 728                 wake_up_interruptible(&pipe->wait);
 729         kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
 730 }
 731
 732 /**
 733  * splice_from_pipe_feed - feed available data from a pipe to a file
 734  * @pipe:       pipe to splice from
 735  * @sd:         information to @actor
 736  * @actor:      handler that splices the data
 737  *
 738  * Description:
 739  *    This function loops over the pipe and calls @actor to do the
 740  *    actual moving of a single struct pipe_buffer to the desired
 741  *    destination.  It returns when there's no more buffers left in
 742  *    the pipe or if the requested number of bytes (@sd->total_len)
 743  *    have been copied.  It returns a positive number (one) if the
 744  *    pipe needs to be filled with more data, zero if the required
 745  *    number of bytes have been copied and -errno on error.
 746  *
 747  *    This, together with splice_from_pipe_{begin,end,next}, may be
 748  *    used to implement the functionality of __splice_from_pipe() when
 749  *    locking is required around copying the pipe buffers to the
 750  *    destination.
 751  */
 752 int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
 753                           splice_actor *actor)
 754 {
 755         int ret;
 756
 757         while (pipe->nrbufs) {
 758                 struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
 759                 const struct pipe_buf_operations *ops = buf->ops;
 760
 761                 sd->len = buf->len;
 762                 if (sd->len > sd->total_len)
 763                         sd->len = sd->total_len;
 764
 765                 ret = actor(pipe, buf, sd);
 766                 if (ret <= 0) {
 767                         if (ret == -ENODATA)
 768                                 ret = 0;
 769                         return ret;
 770                 }
 771                 buf->offset += ret;
 772                 buf->len -= ret;
 773
 774                 sd->num_spliced += ret;
 775                 sd->len -= ret;
 776                 sd->pos += ret;
 777                 sd->total_len -= ret;
 778
 779                 if (!buf->len) {
 780                         buf->ops = NULL;
 781                         ops->release(pipe, buf);
 782                         pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
 783                         pipe->nrbufs--;
 784                         if (pipe->inode)
 785                                 sd->need_wakeup = true;
 786                 }
 787
 788                 if (!sd->total_len)
 789                         return 0;
 790         }
 791
 792         return 1;
 793 }
 794 EXPORT_SYMBOL(splice_from_pipe_feed);
 795
 796 /**
 797  * splice_from_pipe_next - wait for some data to splice from
 798  * @pipe:       pipe to splice from
 799  * @sd:         information about the splice operation
 800  *
 801  * Description:
 802  *    This function will wait for some data and return a positive
 803  *    value (one) if pipe buffers are available.  It will return zero
 804  *    or -errno if no more data needs to be spliced.
 805  */
 806 int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
 807 {
 808         while (!pipe->nrbufs) {
 809                 if (!pipe->writers)
 810                         return 0;
 811
 812                 if (!pipe->waiting_writers && sd->num_spliced)
 813                         return 0;
 814
 815                 if (sd->flags & SPLICE_F_NONBLOCK)
 816                         return -EAGAIN;
 817
 818                 if (signal_pending(current))
 819                         return -ERESTARTSYS;
 820
 821                 if (sd->need_wakeup) {
 822                         wakeup_pipe_writers(pipe);
 823                         sd->need_wakeup = false;
 824                 }
 825
 826                 pipe_wait(pipe);
 827         }
 828
 829         return 1;
 830 }
 831 EXPORT_SYMBOL(splice_from_pipe_next);
 832
 833 /**
 834  * splice_from_pipe_begin - start splicing from pipe
 835  * @sd:         information about the splice operation
 836  *
 837  * Description:
 838  *    This function should be called before a loop containing
 839  *    splice_from_pipe_next() and splice_from_pipe_feed() to
 840  *    initialize the necessary fields of @sd.
 841  */
 842 void splice_from_pipe_begin(struct splice_desc *sd)
 843 {
 844         sd->num_spliced = 0;
 845         sd->need_wakeup = false;
 846 }
 847 EXPORT_SYMBOL(splice_from_pipe_begin);
 848
 849 /**
 850  * splice_from_pipe_end - finish splicing from pipe
 851  * @pipe:       pipe to splice from
 852  * @sd:         information about the splice operation
 853  *
 854  * Description:
 855  *    This function will wake up pipe writers if necessary.  It should
 856  *    be called after a loop containing splice_from_pipe_next() and
 857  *    splice_from_pipe_feed().
 858  */
 859 void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
 860 {
 861         if (sd->need_wakeup)
 862                 wakeup_pipe_writers(pipe);
 863 }
 864 EXPORT_SYMBOL(splice_from_pipe_end);
 865
 866 /**
 867  * __splice_from_pipe - splice data from a pipe to given actor
 868  * @pipe:       pipe to splice from
 869  * @sd:         information to @actor
 870  * @actor:      handler that splices the data
 871  *
 872  * Description:
 873  *    This function does little more than loop over the pipe and call
 874  *    @actor to do the actual moving of a single struct pipe_buffer to
 875  *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
 876  *    pipe_to_user.
 877  *
 878  */
 879 ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
 880                            splice_actor *actor)
 881 {
 882         int ret;
 883
 884         splice_from_pipe_begin(sd);
 885         do {
 886                 ret = splice_from_pipe_next(pipe, sd);
 887                 if (ret > 0)
 888                         ret = splice_from_pipe_feed(pipe, sd, actor);
 889         } while (ret > 0);
 890         splice_from_pipe_end(pipe, sd);
 891
 892         return sd->num_spliced ? sd->num_spliced : ret;
 893 }
 894 EXPORT_SYMBOL(__splice_from_pipe);
 895
 896 /**
 897  * splice_from_pipe - splice data from a pipe to a file
 898  * @pipe:       pipe to splice from
 899  * @out:        file to splice to
 900  * @ppos:       position in @out
 901  * @len:        how many bytes to splice
 902  * @flags:      splice modifier flags
 903  * @actor:      handler that splices the data
 904  *
 905  * Description:
 906  *    See __splice_from_pipe. This function locks the pipe inode,
 907  *    otherwise it's identical to __splice_from_pipe().
 908  *
 909  */
 910 ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 911                          loff_t *ppos, size_t len, unsigned int flags,
 912                          splice_actor *actor)
 913 {
 914         ssize_t ret;
 915         struct splice_desc sd = {
 916                 .total_len = len,
 917                 .flags = flags,
 918                 .pos = *ppos,
 919                 .u.file = out,
 920         };
 921
 922         pipe_lock(pipe);
 923         ret = __splice_from_pipe(pipe, &sd, actor);
 924         pipe_unlock(pipe);
 925
 926         return ret;
 927 }
 928
 929 /**
 930  * generic_file_splice_write - splice data from a pipe to a file
 931  * @pipe:       pipe info
 932  * @out:        file to write to
 933  * @ppos:       position in @out
 934  * @len:        number of bytes to splice
 935  * @flags:      splice modifier flags
 936  *
 937  * Description:
 938  *    Will either move or copy pages (determined by @flags options) from
 939  *    the given pipe inode to the given file.
 940  *
 941  */
 942 ssize_t
 943 generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 944                           loff_t *ppos, size_t len, unsigned int flags)
 945 {
 946         struct address_space *mapping = out->f_mapping;
 947         struct inode *inode = mapping->host;
 948         struct splice_desc sd = {
 949                 .total_len = len,
 950                 .flags = flags,
 951                 .pos = *ppos,
 952                 .u.file = out,
 953         };
 954         ssize_t ret;
 955
 956         pipe_lock(pipe);
 957
 958         splice_from_pipe_begin(&sd);
 959         do {
 960                 ret = splice_from_pipe_next(pipe, &sd);
 961                 if (ret <= 0)
 962                         break;
 963
 964                 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
 965                 ret = file_remove_suid(out);
 966                 if (!ret)
 967                         ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
 968                 mutex_unlock(&inode->i_mutex);
 969         } while (ret > 0);
 970         splice_from_pipe_end(pipe, &sd);
 971
 972         pipe_unlock(pipe);
 973
 974         if (sd.num_spliced)
 975                 ret = sd.num_spliced;
 976
 977         if (ret > 0) {
 978                 unsigned long nr_pages;
 979                 int err;
 980
 981                 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 982
 983                 err = generic_write_sync(out, *ppos, ret);
 984                 if (err)
 985                         ret = err;
 986                 else
 987                         *ppos += ret;
 988                 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
 989         }
 990
 991         return ret;
 992 }
 993
 994 EXPORT_SYMBOL(generic_file_splice_write);
 995
 996 static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 997                           struct splice_desc *sd)
 998 {
 999         int ret;
1000         void *data;
1001
1002         ret = buf->ops->confirm(pipe, buf);
1003         if (ret)
1004                 return ret;
1005
1006         data = buf->ops->map(pipe, buf, 0);
1007         ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
1008         buf->ops->unmap(pipe, buf, data);
1009
1010         return ret;
1011 }
1012
1013 static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
1014                                          struct file *out, loff_t *ppos,
1015                                          size_t len, unsigned int flags)
1016 {
1017         ssize_t ret;
1018
1019         ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
1020         if (ret > 0)
1021                 *ppos += ret;
1022
1023         return ret;
1024 }
1025
1026 /**
1027  * generic_splice_sendpage - splice data from a pipe to a socket
1028  * @pipe:       pipe to splice from
1029  * @out:        socket to write to
1030  * @ppos:       position in @out
1031  * @len:        number of bytes to splice
1032  * @flags:      splice modifier flags
1033  *
1034  * Description:
1035  *    Will send @len bytes from the pipe to a network socket. No data copying
1036  *    is involved.
1037  *
1038  */
1039 ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
1040                                 loff_t *ppos, size_t len, unsigned int flags)
1041 {
1042         return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
1043 }
1044
1045 EXPORT_SYMBOL(generic_splice_sendpage);
1046
1047 /*
1048  * Attempt to initiate a splice from pipe to file.
1049  */
1050 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
1051                            loff_t *ppos, size_t len, unsigned int flags)
1052 {
1053         ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
1054                                 loff_t *, size_t, unsigned int);
1055         int ret;
1056
1057         if (unlikely(!(out->f_mode & FMODE_WRITE)))
1058                 return -EBADF;
1059
1060         if (unlikely(out->f_flags & O_APPEND))
1061                 return -EINVAL;
1062
1063         ret = rw_verify_area(WRITE, out, ppos, len);
1064         if (unlikely(ret < 0))
1065                 return ret;
1066
1067         splice_write = out->f_op->splice_write;
1068         if (!splice_write)
1069                 splice_write = default_file_splice_write;
1070
1071         return splice_write(pipe, out, ppos, len, flags);
1072 }
1073
1074 /*
1075  * Attempt to initiate a splice from a file to a pipe.
1076  */
1077 static long do_splice_to(struct file *in, loff_t *ppos,
1078                          struct pipe_inode_info *pipe, size_t len,
1079                          unsigned int flags)
1080 {
1081         ssize_t (*splice_read)(struct file *, loff_t *,
1082                                struct pipe_inode_info *, size_t, unsigned int);
1083         int ret;
1084
1085         if (unlikely(!(in->f_mode & FMODE_READ)))
1086                 return -EBADF;
1087
1088         ret = rw_verify_area(READ, in, ppos, len);
1089         if (unlikely(ret < 0))
1090                 return ret;
1091
1092         splice_read = in->f_op->splice_read;
1093         if (!splice_read)
1094                 splice_read = default_file_splice_read;
1095
1096         return splice_read(in, ppos, pipe, len, flags);
1097 }
1098
1099 /**
1100  * splice_direct_to_actor - splices data directly between two non-pipes
1101  * @in:         file to splice from
1102  * @sd:         actor information on where to splice to
1103  * @actor:      handles the data splicing
1104  *
1105  * Description:
1106  *    This is a special case helper to splice directly between two
1107  *    points, without requiring an explicit pipe. Internally an allocated
1108  *    pipe is cached in the process, and reused during the lifetime of
1109  *    that process.
1110  *
1111  */
1112 ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
1113                                splice_direct_actor *actor)
1114 {
1115         struct pipe_inode_info *pipe;
1116         long ret, bytes;
1117         umode_t i_mode;
1118         size_t len;
1119         int i, flags;
1120
1121         /*
1122          * We require the input being a regular file, as we don't want to
1123          * randomly drop data for eg socket -> socket splicing. Use the
1124          * piped splicing for that!
1125          */
1126         i_mode = in->f_path.dentry->d_inode->i_mode;
1127         if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
1128                 return -EINVAL;
1129
1130         /*
1131          * neither in nor out is a pipe, setup an internal pipe attached to
1132          * 'out' and transfer the wanted data from 'in' to 'out' through that
1133          */
1134         pipe = current->splice_pipe;
1135         if (unlikely(!pipe)) {
1136                 pipe = alloc_pipe_info(NULL);
1137                 if (!pipe)
1138                         return -ENOMEM;
1139
1140                 /*
1141                  * We don't have an immediate reader, but we'll read the stuff
1142                  * out of the pipe right after the splice_to_pipe(). So set
1143                  * PIPE_READERS appropriately.
1144                  */
1145                 pipe->readers = 1;
1146
1147                 current->splice_pipe = pipe;
1148         }
1149
1150         /*
1151          * Do the splice.
1152          */
1153         ret = 0;
1154         bytes = 0;
1155         len = sd->total_len;
1156         flags = sd->flags;
1157
1158         /*
1159          * Don't block on output, we have to drain the direct pipe.
1160          */
1161         sd->flags &= ~SPLICE_F_NONBLOCK;
1162
1163         while (len) {
1164                 size_t read_len;
1165                 loff_t pos = sd->pos, prev_pos = pos;
1166
1167                 ret = do_splice_to(in, &pos, pipe, len, flags);
1168                 if (unlikely(ret <= 0))
1169                         goto out_release;
1170
1171                 read_len = ret;
1172                 sd->total_len = read_len;
1173
1174                 /*
1175                  * NOTE: nonblocking mode only applies to the input. We
1176                  * must not do the output in nonblocking mode as then we
1177                  * could get stuck data in the internal pipe:
1178                  */
1179                 ret = actor(pipe, sd);
1180                 if (unlikely(ret <= 0)) {
1181                         sd->pos = prev_pos;
1182                         goto out_release;
1183                 }
1184
1185                 bytes += ret;
1186                 len -= ret;
1187                 sd->pos = pos;
1188
1189                 if (ret < read_len) {
1190                         sd->pos = prev_pos + ret;
1191                         goto out_release;
1192                 }
1193         }
1194
1195 done:
1196         pipe->nrbufs = pipe->curbuf = 0;
1197         file_accessed(in);
1198         return bytes;
1199
1200 out_release:
1201         /*
1202          * If we did an incomplete transfer we must release
1203          * the pipe buffers in question:
1204          */
1205         for (i = 0; i < PIPE_BUFFERS; i++) {
1206                 struct pipe_buffer *buf = pipe->bufs + i;
1207
1208                 if (buf->ops) {
1209                         buf->ops->release(pipe, buf);
1210                         buf->ops = NULL;
1211                 }
1212         }
1213
1214         if (!bytes)
1215                 bytes = ret;
1216
1217         goto done;
1218 }
1219 EXPORT_SYMBOL(splice_direct_to_actor);
1220
1221 static int direct_splice_actor(struct pipe_inode_info *pipe,
1222                                struct splice_desc *sd)
1223 {
1224         struct file *file = sd->u.file;
1225
1226         return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
1227 }
1228
1229 /**
1230  * do_splice_direct - splices data directly between two files
1231  * @in:         file to splice from
1232  * @ppos:       input file offset
1233  * @out:        file to splice to
1234  * @len:        number of bytes to splice
1235  * @flags:      splice modifier flags
1236  *
1237  * Description:
1238  *    For use by do_sendfile(). splice can easily emulate sendfile, but
1239  *    doing it in the application would incur an extra system call
1240  *    (splice in + splice out, as compared to just sendfile()). So this helper
1241  *    can splice directly through a process-private pipe.
1242  *
1243  */
1244 long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
1245                       size_t len, unsigned int flags)
1246 {
1247         struct splice_desc sd = {
1248                 .len            = len,
1249                 .total_len      = len,
1250                 .flags          = flags,
1251                 .pos            = *ppos,
1252                 .u.file         = out,
1253         };
1254         long ret;
1255
1256         ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
1257         if (ret > 0)
1258                 *ppos = sd.pos;
1259
1260         return ret;
1261 }
1262
1263 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1264                                struct pipe_inode_info *opipe,
1265                                size_t len, unsigned int flags);
1266 /*
1267  * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
1268  * location, so checking ->i_pipe is not enough to verify that this is a
1269  * pipe.
1270  */
1271 static inline struct pipe_inode_info *pipe_info(struct inode *inode)
1272 {
1273         if (S_ISFIFO(inode->i_mode))
1274                 return inode->i_pipe;
1275
1276         return NULL;
1277 }
1278
1279 /*
1280  * Determine where to splice to/from.
1281  */
1282 static long do_splice(struct file *in, loff_t __user *off_in,
1283                       struct file *out, loff_t __user *off_out,
1284                       size_t len, unsigned int flags)
1285 {
1286         struct pipe_inode_info *ipipe;
1287         struct pipe_inode_info *opipe;
1288         loff_t offset, *off;
1289         long ret;
1290
1291         ipipe = pipe_info(in->f_path.dentry->d_inode);
1292         opipe = pipe_info(out->f_path.dentry->d_inode);
1293
1294         if (ipipe && opipe) {
1295                 if (off_in || off_out)
1296                         return -ESPIPE;
1297
1298                 if (!(in->f_mode & FMODE_READ))
1299                         return -EBADF;
1300
1301                 if (!(out->f_mode & FMODE_WRITE))
1302                         return -EBADF;
1303
1304                 /* Splicing to self would be fun, but... */
1305                 if (ipipe == opipe)
1306                         return -EINVAL;
1307
1308                 return splice_pipe_to_pipe(ipipe, opipe, len, flags);
1309         }
1310
1311         if (ipipe) {
1312                 if (off_in)
1313                         return -ESPIPE;
1314                 if (off_out) {
1315                         if (out->f_op->llseek == no_llseek)
1316                                 return -EINVAL;
1317                         if (copy_from_user(&offset, off_out, sizeof(loff_t)))
1318                                 return -EFAULT;
1319                         off = &offset;
1320                 } else
1321                         off = &out->f_pos;
1322
1323                 ret = do_splice_from(ipipe, out, off, len, flags);
1324
1325                 if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
1326                         ret = -EFAULT;
1327
1328                 return ret;
1329         }
1330
1331         if (opipe) {
1332                 if (off_out)
1333                         return -ESPIPE;
1334                 if (off_in) {
1335                         if (in->f_op->llseek == no_llseek)
1336                                 return -EINVAL;
1337                         if (copy_from_user(&offset, off_in, sizeof(loff_t)))
1338                                 return -EFAULT;
1339                         off = &offset;
1340                 } else
1341                         off = &in->f_pos;
1342
1343                 ret = do_splice_to(in, off, opipe, len, flags);
1344
1345                 if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
1346                         ret = -EFAULT;
1347
1348                 return ret;
1349         }
1350
1351         return -EINVAL;
1352 }
1353
1354 /*
1355  * Map an iov into an array of pages and offset/length tupples. With the
1356  * partial_page structure, we can map several non-contiguous ranges into
1357  * our ones pages[] map instead of splitting that operation into pieces.
1358  * Could easily be exported as a generic helper for other users, in which
1359  * case one would probably want to add a 'max_nr_pages' parameter as well.
1360  */
1361 static int get_iovec_page_array(const struct iovec __user *iov,
1362                                 unsigned int nr_vecs, struct page **pages,
1363                                 struct partial_page *partial, int aligned)
1364 {
1365         int buffers = 0, error = 0;
1366
1367         while (nr_vecs) {
1368                 unsigned long off, npages;
1369                 struct iovec entry;
1370                 void __user *base;
1371                 size_t len;
1372                 int i;
1373
1374                 error = -EFAULT;
1375                 if (copy_from_user(&entry, iov, sizeof(entry)))
1376                         break;
1377
1378                 base = entry.iov_base;
1379                 len = entry.iov_len;
1380
1381                 /*
1382                  * Sanity check this iovec. 0 read succeeds.
1383                  */
1384                 error = 0;
1385                 if (unlikely(!len))
1386                         break;
1387                 error = -EFAULT;
1388                 if (!access_ok(VERIFY_READ, base, len))
1389                         break;
1390
1391                 /*
1392                  * Get this base offset and number of pages, then map
1393                  * in the user pages.
1394                  */
1395                 off = (unsigned long) base & ~PAGE_MASK;
1396
1397                 /*
1398                  * If asked for alignment, the offset must be zero and the
1399                  * length a multiple of the PAGE_SIZE.
1400                  */
1401                 error = -EINVAL;
1402                 if (aligned && (off || len & ~PAGE_MASK))
1403                         break;
1404
1405                 npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
1406                 if (npages > PIPE_BUFFERS - buffers)
1407                         npages = PIPE_BUFFERS - buffers;
1408
1409                 error = get_user_pages_fast((unsigned long)base, npages,
1410                                         0, &pages[buffers]);
1411
1412                 if (unlikely(error <= 0))
1413                         break;
1414
1415                 /*
1416                  * Fill this contiguous range into the partial page map.
1417                  */
1418                 for (i = 0; i < error; i++) {
1419                         const int plen = min_t(size_t, len, PAGE_SIZE - off);
1420
1421                         partial[buffers].offset = off;
1422                         partial[buffers].len = plen;
1423
1424                         off = 0;
1425                         len -= plen;
1426                         buffers++;
1427                 }
1428
1429                 /*
1430                  * We didn't complete this iov, stop here since it probably
1431                  * means we have to move some of this into a pipe to
1432                  * be able to continue.
1433                  */
1434                 if (len)
1435                         break;
1436
1437                 /*
1438                  * Don't continue if we mapped fewer pages than we asked for,
1439                  * or if we mapped the max number of pages that we have
1440                  * room for.
1441                  */
1442                 if (error < npages || buffers == PIPE_BUFFERS)
1443                         break;
1444
1445                 nr_vecs--;
1446                 iov++;
1447         }
1448
1449         if (buffers)
1450                 return buffers;
1451
1452         return error;
1453 }
1454
1455 static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
1456                         struct splice_desc *sd)
1457 {
1458         char *src;
1459         int ret;
1460
1461         ret = buf->ops->confirm(pipe, buf);
1462         if (unlikely(ret))
1463                 return ret;
1464
1465         /*
1466          * See if we can use the atomic maps, by prefaulting in the
1467          * pages and doing an atomic copy
1468          */
1469         if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
1470                 src = buf->ops->map(pipe, buf, 1);
1471                 ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
1472                                                         sd->len);
1473                 buf->ops->unmap(pipe, buf, src);
1474                 if (!ret) {
1475                         ret = sd->len;
1476                         goto out;
1477                 }
1478         }
1479
1480         /*
1481          * No dice, use slow non-atomic map and copy
1482          */
1483         src = buf->ops->map(pipe, buf, 0);
1484
1485         ret = sd->len;
1486         if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
1487                 ret = -EFAULT;
1488
1489         buf->ops->unmap(pipe, buf, src);
1490 out:
1491         if (ret > 0)
1492                 sd->u.userptr += ret;
1493         return ret;
1494 }
1495
1496 /*
1497  * For lack of a better implementation, implement vmsplice() to userspace
1498  * as a simple copy of the pipes pages to the user iov.
1499  */
1500 static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
1501                              unsigned long nr_segs, unsigned int flags)
1502 {
1503         struct pipe_inode_info *pipe;
1504         struct splice_desc sd;
1505         ssize_t size;
1506         int error;
1507         long ret;
1508
1509         pipe = pipe_info(file->f_path.dentry->d_inode);
1510         if (!pipe)
1511                 return -EBADF;
1512
1513         pipe_lock(pipe);
1514
1515         error = ret = 0;
1516         while (nr_segs) {
1517                 void __user *base;
1518                 size_t len;
1519
1520                 /*
1521                  * Get user address base and length for this iovec.
1522                  */
1523                 error = get_user(base, &iov->iov_base);
1524                 if (unlikely(error))
1525                         break;
1526                 error = get_user(len, &iov->iov_len);
1527                 if (unlikely(error))
1528                         break;
1529
1530                 /*
1531                  * Sanity check this iovec. 0 read succeeds.
1532                  */
1533                 if (unlikely(!len))
1534                         break;
1535                 if (unlikely(!base)) {
1536                         error = -EFAULT;
1537                         break;
1538                 }
1539
1540                 if (unlikely(!access_ok(VERIFY_WRITE, base, len))) {
1541                         error = -EFAULT;
1542                         break;
1543                 }
1544
1545                 sd.len = 0;
1546                 sd.total_len = len;
1547                 sd.flags = flags;
1548                 sd.u.userptr = base;
1549                 sd.pos = 0;
1550
1551                 size = __splice_from_pipe(pipe, &sd, pipe_to_user);
1552                 if (size < 0) {
1553                         if (!ret)
1554                                 ret = size;
1555
1556                         break;
1557                 }
1558
1559                 ret += size;
1560
1561                 if (size < len)
1562                         break;
1563
1564                 nr_segs--;
1565                 iov++;
1566         }
1567
1568         pipe_unlock(pipe);
1569
1570         if (!ret)
1571                 ret = error;
1572
1573         return ret;
1574 }
1575
1576 /*
1577  * vmsplice splices a user address range into a pipe. It can be thought of
1578  * as splice-from-memory, where the regular splice is splice-from-file (or
1579  * to file). In both cases the output is a pipe, naturally.
1580  */
1581 static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
1582                              unsigned long nr_segs, unsigned int flags)
1583 {
1584         struct pipe_inode_info *pipe;
1585         struct page *pages[PIPE_BUFFERS];
1586         struct partial_page partial[PIPE_BUFFERS];
1587         struct splice_pipe_desc spd = {
1588                 .pages = pages,
1589                 .partial = partial,
1590                 .flags = flags,
1591                 .ops = &user_page_pipe_buf_ops,
1592                 .spd_release = spd_release_page,
1593         };
1594
1595         pipe = pipe_info(file->f_path.dentry->d_inode);
1596         if (!pipe)
1597                 return -EBADF;
1598
1599         spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial,
1600                                             flags & SPLICE_F_GIFT);
1601         if (spd.nr_pages <= 0)
1602                 return spd.nr_pages;
1603
1604         return splice_to_pipe(pipe, &spd);
1605 }
1606
1607 /*
1608  * Note that vmsplice only really supports true splicing _from_ user memory
1609  * to a pipe, not the other way around. Splicing from user memory is a simple
1610  * operation that can be supported without any funky alignment restrictions
1611  * or nasty vm tricks. We simply map in the user memory and fill them into
1612  * a pipe. The reverse isn't quite as easy, though. There are two possible
1613  * solutions for that:
1614  *
1615  *      - memcpy() the data internally, at which point we might as well just
1616  *        do a regular read() on the buffer anyway.
1617  *      - Lots of nasty vm tricks, that are neither fast nor flexible (it
1618  *        has restriction limitations on both ends of the pipe).
1619  *
1620  * Currently we punt and implement it as a normal copy, see pipe_to_user().
1621  *
1622  */
1623 SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
1624                 unsigned long, nr_segs, unsigned int, flags)
1625 {
1626         struct file *file;
1627         long error;
1628         int fput;
1629
1630         if (unlikely(nr_segs > UIO_MAXIOV))
1631                 return -EINVAL;
1632         else if (unlikely(!nr_segs))
1633                 return 0;
1634
1635         error = -EBADF;
1636         file = fget_light(fd, &fput);
1637         if (file) {
1638                 if (file->f_mode & FMODE_WRITE)
1639                         error = vmsplice_to_pipe(file, iov, nr_segs, flags);
1640                 else if (file->f_mode & FMODE_READ)
1641                         error = vmsplice_to_user(file, iov, nr_segs, flags);
1642
1643                 fput_light(file, fput);
1644         }
1645
1646         return error;
1647 }
1648
1649 SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
1650                 int, fd_out, loff_t __user *, off_out,
1651                 size_t, len, unsigned int, flags)
1652 {
1653         long error;
1654         struct file *in, *out;
1655         int fput_in, fput_out;
1656
1657         if (unlikely(!len))
1658                 return 0;
1659
1660         error = -EBADF;
1661         in = fget_light(fd_in, &fput_in);
1662         if (in) {
1663                 if (in->f_mode & FMODE_READ) {
1664                         out = fget_light(fd_out, &fput_out);
1665                         if (out) {
1666                                 if (out->f_mode & FMODE_WRITE)
1667                                         error = do_splice(in, off_in,
1668                                                           out, off_out,
1669                                                           len, flags);
1670                                 fput_light(out, fput_out);
1671                         }
1672                 }
1673
1674                 fput_light(in, fput_in);
1675         }
1676
1677         return error;
1678 }
1679
1680 /*
1681  * Make sure there's data to read. Wait for input if we can, otherwise
1682  * return an appropriate error.
1683  */
1684 static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1685 {
1686         int ret;
1687
1688         /*
1689          * Check ->nrbufs without the inode lock first. This function
1690          * is speculative anyways, so missing one is ok.
1691          */
1692         if (pipe->nrbufs)
1693                 return 0;
1694
1695         ret = 0;
1696         pipe_lock(pipe);
1697
1698         while (!pipe->nrbufs) {
1699                 if (signal_pending(current)) {
1700                         ret = -ERESTARTSYS;
1701                         break;
1702                 }
1703                 if (!pipe->writers)
1704                         break;
1705                 if (!pipe->waiting_writers) {
1706                         if (flags & SPLICE_F_NONBLOCK) {
1707                                 ret = -EAGAIN;
1708                                 break;
1709                         }
1710                 }
1711                 pipe_wait(pipe);
1712         }
1713
1714         pipe_unlock(pipe);
1715         return ret;
1716 }
1717
1718 /*
1719  * Make sure there's writeable room. Wait for room if we can, otherwise
1720  * return an appropriate error.
1721  */
1722 static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1723 {
1724         int ret;
1725
1726         /*
1727          * Check ->nrbufs without the inode lock first. This function
1728          * is speculative anyways, so missing one is ok.
1729          */
1730         if (pipe->nrbufs < PIPE_BUFFERS)
1731                 return 0;
1732
1733         ret = 0;
1734         pipe_lock(pipe);
1735
1736         while (pipe->nrbufs >= PIPE_BUFFERS) {
1737                 if (!pipe->readers) {
1738                         send_sig(SIGPIPE, current, 0);
1739                         ret = -EPIPE;
1740                         break;
1741                 }
1742                 if (flags & SPLICE_F_NONBLOCK) {
1743                         ret = -EAGAIN;
1744                         break;
1745                 }
1746                 if (signal_pending(current)) {
1747                         ret = -ERESTARTSYS;
1748                         break;
1749                 }
1750                 pipe->waiting_writers++;
1751                 pipe_wait(pipe);
1752                 pipe->waiting_writers--;
1753         }
1754
1755         pipe_unlock(pipe);
1756         return ret;
1757 }
1758
1759 /*
1760  * Splice contents of ipipe to opipe.
1761  */
1762 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1763                                struct pipe_inode_info *opipe,
1764                                size_t len, unsigned int flags)
1765 {
1766         struct pipe_buffer *ibuf, *obuf;
1767         int ret = 0, nbuf;
1768         bool input_wakeup = false;
1769
1770
1771 retry:
1772         ret = ipipe_prep(ipipe, flags);
1773         if (ret)
1774                 return ret;
1775
1776         ret = opipe_prep(opipe, flags);
1777         if (ret)
1778                 return ret;
1779
1780         /*
1781          * Potential ABBA deadlock, work around it by ordering lock
1782          * grabbing by pipe info address. Otherwise two different processes
1783          * could deadlock (one doing tee from A -> B, the other from B -> A).
1784          */
1785         pipe_double_lock(ipipe, opipe);
1786
1787         do {
1788                 if (!opipe->readers) {
1789                         send_sig(SIGPIPE, current, 0);
1790                         if (!ret)
1791                                 ret = -EPIPE;
1792                         break;
1793                 }
1794
1795                 if (!ipipe->nrbufs && !ipipe->writers)
1796                         break;
1797
1798                 /*
1799                  * Cannot make any progress, because either the input
1800                  * pipe is empty or the output pipe is full.
1801                  */
1802                 if (!ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS) {
1803                         /* Already processed some buffers, break */
1804                         if (ret)
1805                                 break;
1806
1807                         if (flags & SPLICE_F_NONBLOCK) {
1808                                 ret = -EAGAIN;
1809                                 break;
1810                         }
1811
1812                         /*
1813                          * We raced with another reader/writer and haven't
1814                          * managed to process any buffers.  A zero return
1815                          * value means EOF, so retry instead.
1816                          */
1817                         pipe_unlock(ipipe);
1818                         pipe_unlock(opipe);
1819                         goto retry;
1820                 }
1821
1822                 ibuf = ipipe->bufs + ipipe->curbuf;
1823                 nbuf = (opipe->curbuf + opipe->nrbufs) % PIPE_BUFFERS;
1824                 obuf = opipe->bufs + nbuf;
1825
1826                 if (len >= ibuf->len) {
1827                         /*
1828                          * Simply move the whole buffer from ipipe to opipe
1829                          */
1830                         *obuf = *ibuf;
1831                         ibuf->ops = NULL;
1832                         opipe->nrbufs++;
1833                         ipipe->curbuf = (ipipe->curbuf + 1) % PIPE_BUFFERS;
1834                         ipipe->nrbufs--;
1835                         input_wakeup = true;
1836                 } else {
1837                         /*
1838                          * Get a reference to this pipe buffer,
1839                          * so we can copy the contents over.
1840                          */
1841                         ibuf->ops->get(ipipe, ibuf);
1842                         *obuf = *ibuf;
1843
1844                         /*
1845                          * Don't inherit the gift flag, we need to
1846                          * prevent multiple steals of this page.
1847                          */
1848                         obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1849
1850                         obuf->len = len;
1851                         opipe->nrbufs++;
1852                         ibuf->offset += obuf->len;
1853                         ibuf->len -= obuf->len;
1854                 }
1855                 ret += obuf->len;
1856                 len -= obuf->len;
1857         } while (len);
1858
1859         pipe_unlock(ipipe);
1860         pipe_unlock(opipe);
1861
1862         /*
1863          * If we put data in the output pipe, wakeup any potential readers.
1864          */
1865         if (ret > 0) {
1866                 smp_mb();
1867                 if (waitqueue_active(&opipe->wait))
1868                         wake_up_interruptible(&opipe->wait);
1869                 kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
1870         }
1871         if (input_wakeup)
1872                 wakeup_pipe_writers(ipipe);
1873
1874         return ret;
1875 }
1876
1877 /*
1878  * Link contents of ipipe to opipe.
1879  */
1880 static int link_pipe(struct pipe_inode_info *ipipe,
1881                      struct pipe_inode_info *opipe,
1882                      size_t len, unsigned int flags)
1883 {
1884         struct pipe_buffer *ibuf, *obuf;
1885         int ret = 0, i = 0, nbuf;
1886
1887         /*
1888          * Potential ABBA deadlock, work around it by ordering lock
1889          * grabbing by pipe info address. Otherwise two different processes
1890          * could deadlock (one doing tee from A -> B, the other from B -> A).
1891          */
1892         pipe_double_lock(ipipe, opipe);
1893
1894         do {
1895                 if (!opipe->readers) {
1896                         send_sig(SIGPIPE, current, 0);
1897                         if (!ret)
1898                                 ret = -EPIPE;
1899                         break;
1900                 }
1901
1902                 /*
1903                  * If we have iterated all input buffers or ran out of
1904                  * output room, break.
1905                  */
1906                 if (i >= ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS)
1907                         break;
1908
1909                 ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
1910                 nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
1911
1912                 /*
1913                  * Get a reference to this pipe buffer,
1914                  * so we can copy the contents over.
1915                  */
1916                 ibuf->ops->get(ipipe, ibuf);
1917
1918                 obuf = opipe->bufs + nbuf;
1919                 *obuf = *ibuf;
1920
1921                 /*
1922                  * Don't inherit the gift flag, we need to
1923                  * prevent multiple steals of this page.
1924                  */
1925                 obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1926
1927                 if (obuf->len > len)
1928                         obuf->len = len;
1929
1930                 opipe->nrbufs++;
1931                 ret += obuf->len;
1932                 len -= obuf->len;
1933                 i++;
1934         } while (len);
1935
1936         /*
1937          * return EAGAIN if we have the potential of some data in the
1938          * future, otherwise just return 0
1939          */
1940         if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
1941                 ret = -EAGAIN;
1942
1943         pipe_unlock(ipipe);
1944         pipe_unlock(opipe);
1945
1946         /*
1947          * If we put data in the output pipe, wakeup any potential readers.
1948          */
1949         if (ret > 0) {
1950                 smp_mb();
1951                 if (waitqueue_active(&opipe->wait))
1952                         wake_up_interruptible(&opipe->wait);
1953                 kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
1954         }
1955
1956         return ret;
1957 }
1958
1959 /*
1960  * This is a tee(1) implementation that works on pipes. It doesn't copy
1961  * any data, it simply references the 'in' pages on the 'out' pipe.
1962  * The 'flags' used are the SPLICE_F_* variants, currently the only
1963  * applicable one is SPLICE_F_NONBLOCK.
1964  */
1965 static long do_tee(struct file *in, struct file *out, size_t len,
1966                    unsigned int flags)
1967 {
1968         struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
1969         struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
1970         int ret = -EINVAL;
1971
1972         /*
1973          * Duplicate the contents of ipipe to opipe without actually
1974          * copying the data.
1975          */
1976         if (ipipe && opipe && ipipe != opipe) {
1977                 /*
1978                  * Keep going, unless we encounter an error. The ipipe/opipe
1979                  * ordering doesn't really matter.
1980                  */
1981                 ret = ipipe_prep(ipipe, flags);
1982                 if (!ret) {
1983                         ret = opipe_prep(opipe, flags);
1984                         if (!ret)
1985                                 ret = link_pipe(ipipe, opipe, len, flags);
1986                 }
1987         }
1988
1989         return ret;
1990 }
1991
1992 SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
1993 {
1994         struct file *in;
1995         int error, fput_in;
1996
1997         if (unlikely(!len))
1998                 return 0;
1999
2000         error = -EBADF;
2001         in = fget_light(fdin, &fput_in);
2002         if (in) {
2003                 if (in->f_mode & FMODE_READ) {
2004                         int fput_out;
2005                         struct file *out = fget_light(fdout, &fput_out);
2006
2007                         if (out) {
2008                                 if (out->f_mode & FMODE_WRITE)
2009                                         error = do_tee(in, out, len, flags);
2010                                 fput_light(out, fput_out);
2011                         }
2012                 }
2013                 fput_light(in, fput_in);
2014         }
2015
2016         return error;
2017 }