drm/radeon: fix PM on non-vram cards.
[safe/jmp/linux-2.6] / fs / jffs2 / compr_zlib.c
1 /*
2  * JFFS2 -- Journalling Flash File System, Version 2.
3  *
4  * Copyright © 2001-2007 Red Hat, Inc.
5  *
6  * Created by David Woodhouse <dwmw2@infradead.org>
7  *
8  * For licensing information, see the file 'LICENCE' in this directory.
9  *
10  */
11
12 #if !defined(__KERNEL__) && !defined(__ECOS)
13 #error "The userspace support got too messy and was removed. Update your mkfs.jffs2"
14 #endif
15
16 #include <linux/kernel.h>
17 #include <linux/zlib.h>
18 #include <linux/zutil.h>
19 #include "nodelist.h"
20 #include "compr.h"
21
22         /* Plan: call deflate() with avail_in == *sourcelen,
23                 avail_out = *dstlen - 12 and flush == Z_FINISH.
24                 If it doesn't manage to finish, call it again with
25                 avail_in == 0 and avail_out set to the remaining 12
26                 bytes for it to clean up.
27            Q: Is 12 bytes sufficient?
28         */
29 #define STREAM_END_SPACE 12
30
31 static DEFINE_MUTEX(deflate_mutex);
32 static DEFINE_MUTEX(inflate_mutex);
33 static z_stream inf_strm, def_strm;
34
35 #ifdef __KERNEL__ /* Linux-only */
36 #include <linux/vmalloc.h>
37 #include <linux/init.h>
38 #include <linux/mutex.h>
39
40 static int __init alloc_workspaces(void)
41 {
42         def_strm.workspace = vmalloc(zlib_deflate_workspacesize());
43         if (!def_strm.workspace) {
44                 printk(KERN_WARNING "Failed to allocate %d bytes for deflate workspace\n", zlib_deflate_workspacesize());
45                 return -ENOMEM;
46         }
47         D1(printk(KERN_DEBUG "Allocated %d bytes for deflate workspace\n", zlib_deflate_workspacesize()));
48         inf_strm.workspace = vmalloc(zlib_inflate_workspacesize());
49         if (!inf_strm.workspace) {
50                 printk(KERN_WARNING "Failed to allocate %d bytes for inflate workspace\n", zlib_inflate_workspacesize());
51                 vfree(def_strm.workspace);
52                 return -ENOMEM;
53         }
54         D1(printk(KERN_DEBUG "Allocated %d bytes for inflate workspace\n", zlib_inflate_workspacesize()));
55         return 0;
56 }
57
58 static void free_workspaces(void)
59 {
60         vfree(def_strm.workspace);
61         vfree(inf_strm.workspace);
62 }
63 #else
64 #define alloc_workspaces() (0)
65 #define free_workspaces() do { } while(0)
66 #endif /* __KERNEL__ */
67
68 static int jffs2_zlib_compress(unsigned char *data_in,
69                                unsigned char *cpage_out,
70                                uint32_t *sourcelen, uint32_t *dstlen,
71                                void *model)
72 {
73         int ret;
74
75         if (*dstlen <= STREAM_END_SPACE)
76                 return -1;
77
78         mutex_lock(&deflate_mutex);
79
80         if (Z_OK != zlib_deflateInit(&def_strm, 3)) {
81                 printk(KERN_WARNING "deflateInit failed\n");
82                 mutex_unlock(&deflate_mutex);
83                 return -1;
84         }
85
86         def_strm.next_in = data_in;
87         def_strm.total_in = 0;
88
89         def_strm.next_out = cpage_out;
90         def_strm.total_out = 0;
91
92         while (def_strm.total_out < *dstlen - STREAM_END_SPACE && def_strm.total_in < *sourcelen) {
93                 def_strm.avail_out = *dstlen - (def_strm.total_out + STREAM_END_SPACE);
94                 def_strm.avail_in = min((unsigned)(*sourcelen-def_strm.total_in), def_strm.avail_out);
95                 D1(printk(KERN_DEBUG "calling deflate with avail_in %d, avail_out %d\n",
96                           def_strm.avail_in, def_strm.avail_out));
97                 ret = zlib_deflate(&def_strm, Z_PARTIAL_FLUSH);
98                 D1(printk(KERN_DEBUG "deflate returned with avail_in %d, avail_out %d, total_in %ld, total_out %ld\n",
99                           def_strm.avail_in, def_strm.avail_out, def_strm.total_in, def_strm.total_out));
100                 if (ret != Z_OK) {
101                         D1(printk(KERN_DEBUG "deflate in loop returned %d\n", ret));
102                         zlib_deflateEnd(&def_strm);
103                         mutex_unlock(&deflate_mutex);
104                         return -1;
105                 }
106         }
107         def_strm.avail_out += STREAM_END_SPACE;
108         def_strm.avail_in = 0;
109         ret = zlib_deflate(&def_strm, Z_FINISH);
110         zlib_deflateEnd(&def_strm);
111
112         if (ret != Z_STREAM_END) {
113                 D1(printk(KERN_DEBUG "final deflate returned %d\n", ret));
114                 ret = -1;
115                 goto out;
116         }
117
118         if (def_strm.total_out >= def_strm.total_in) {
119                 D1(printk(KERN_DEBUG "zlib compressed %ld bytes into %ld; failing\n",
120                           def_strm.total_in, def_strm.total_out));
121                 ret = -1;
122                 goto out;
123         }
124
125         D1(printk(KERN_DEBUG "zlib compressed %ld bytes into %ld\n",
126                   def_strm.total_in, def_strm.total_out));
127
128         *dstlen = def_strm.total_out;
129         *sourcelen = def_strm.total_in;
130         ret = 0;
131  out:
132         mutex_unlock(&deflate_mutex);
133         return ret;
134 }
135
136 static int jffs2_zlib_decompress(unsigned char *data_in,
137                                  unsigned char *cpage_out,
138                                  uint32_t srclen, uint32_t destlen,
139                                  void *model)
140 {
141         int ret;
142         int wbits = MAX_WBITS;
143
144         mutex_lock(&inflate_mutex);
145
146         inf_strm.next_in = data_in;
147         inf_strm.avail_in = srclen;
148         inf_strm.total_in = 0;
149
150         inf_strm.next_out = cpage_out;
151         inf_strm.avail_out = destlen;
152         inf_strm.total_out = 0;
153
154         /* If it's deflate, and it's got no preset dictionary, then
155            we can tell zlib to skip the adler32 check. */
156         if (srclen > 2 && !(data_in[1] & PRESET_DICT) &&
157             ((data_in[0] & 0x0f) == Z_DEFLATED) &&
158             !(((data_in[0]<<8) + data_in[1]) % 31)) {
159
160                 D2(printk(KERN_DEBUG "inflate skipping adler32\n"));
161                 wbits = -((data_in[0] >> 4) + 8);
162                 inf_strm.next_in += 2;
163                 inf_strm.avail_in -= 2;
164         } else {
165                 /* Let this remain D1 for now -- it should never happen */
166                 D1(printk(KERN_DEBUG "inflate not skipping adler32\n"));
167         }
168
169
170         if (Z_OK != zlib_inflateInit2(&inf_strm, wbits)) {
171                 printk(KERN_WARNING "inflateInit failed\n");
172                 mutex_unlock(&inflate_mutex);
173                 return 1;
174         }
175
176         while((ret = zlib_inflate(&inf_strm, Z_FINISH)) == Z_OK)
177                 ;
178         if (ret != Z_STREAM_END) {
179                 printk(KERN_NOTICE "inflate returned %d\n", ret);
180         }
181         zlib_inflateEnd(&inf_strm);
182         mutex_unlock(&inflate_mutex);
183         return 0;
184 }
185
186 static struct jffs2_compressor jffs2_zlib_comp = {
187     .priority = JFFS2_ZLIB_PRIORITY,
188     .name = "zlib",
189     .compr = JFFS2_COMPR_ZLIB,
190     .compress = &jffs2_zlib_compress,
191     .decompress = &jffs2_zlib_decompress,
192 #ifdef JFFS2_ZLIB_DISABLED
193     .disabled = 1,
194 #else
195     .disabled = 0,
196 #endif
197 };
198
199 int __init jffs2_zlib_init(void)
200 {
201     int ret;
202
203     ret = alloc_workspaces();
204     if (ret)
205             return ret;
206
207     ret = jffs2_register_compressor(&jffs2_zlib_comp);
208     if (ret)
209             free_workspaces();
210
211     return ret;
212 }
213
214 void jffs2_zlib_exit(void)
215 {
216     jffs2_unregister_compressor(&jffs2_zlib_comp);
217     free_workspaces();
218 }