ocfs2: set gap to seperate entry and value when xattr in bucket
[safe/jmp/linux-2.6] / fs / dlm / user.c
1 /*
2  * Copyright (C) 2006-2008 Red Hat, Inc.  All rights reserved.
3  *
4  * This copyrighted material is made available to anyone wishing to use,
5  * modify, copy, or redistribute it subject to the terms and conditions
6  * of the GNU General Public License v.2.
7  */
8
9 #include <linux/miscdevice.h>
10 #include <linux/init.h>
11 #include <linux/wait.h>
12 #include <linux/module.h>
13 #include <linux/file.h>
14 #include <linux/fs.h>
15 #include <linux/poll.h>
16 #include <linux/signal.h>
17 #include <linux/spinlock.h>
18 #include <linux/dlm.h>
19 #include <linux/dlm_device.h>
20
21 #include "dlm_internal.h"
22 #include "lockspace.h"
23 #include "lock.h"
24 #include "lvb_table.h"
25 #include "user.h"
26
27 static const char name_prefix[] = "dlm";
28 static const struct file_operations device_fops;
29 static atomic_t dlm_monitor_opened;
30 static int dlm_monitor_unused = 1;
31
32 #ifdef CONFIG_COMPAT
33
34 struct dlm_lock_params32 {
35         __u8 mode;
36         __u8 namelen;
37         __u16 unused;
38         __u32 flags;
39         __u32 lkid;
40         __u32 parent;
41         __u64 xid;
42         __u64 timeout;
43         __u32 castparam;
44         __u32 castaddr;
45         __u32 bastparam;
46         __u32 bastaddr;
47         __u32 lksb;
48         char lvb[DLM_USER_LVB_LEN];
49         char name[0];
50 };
51
52 struct dlm_write_request32 {
53         __u32 version[3];
54         __u8 cmd;
55         __u8 is64bit;
56         __u8 unused[2];
57
58         union  {
59                 struct dlm_lock_params32 lock;
60                 struct dlm_lspace_params lspace;
61                 struct dlm_purge_params purge;
62         } i;
63 };
64
65 struct dlm_lksb32 {
66         __u32 sb_status;
67         __u32 sb_lkid;
68         __u8 sb_flags;
69         __u32 sb_lvbptr;
70 };
71
72 struct dlm_lock_result32 {
73         __u32 version[3];
74         __u32 length;
75         __u32 user_astaddr;
76         __u32 user_astparam;
77         __u32 user_lksb;
78         struct dlm_lksb32 lksb;
79         __u8 bast_mode;
80         __u8 unused[3];
81         /* Offsets may be zero if no data is present */
82         __u32 lvb_offset;
83 };
84
85 static void compat_input(struct dlm_write_request *kb,
86                          struct dlm_write_request32 *kb32,
87                          size_t count)
88 {
89         kb->version[0] = kb32->version[0];
90         kb->version[1] = kb32->version[1];
91         kb->version[2] = kb32->version[2];
92
93         kb->cmd = kb32->cmd;
94         kb->is64bit = kb32->is64bit;
95         if (kb->cmd == DLM_USER_CREATE_LOCKSPACE ||
96             kb->cmd == DLM_USER_REMOVE_LOCKSPACE) {
97                 kb->i.lspace.flags = kb32->i.lspace.flags;
98                 kb->i.lspace.minor = kb32->i.lspace.minor;
99                 memcpy(kb->i.lspace.name, kb32->i.lspace.name, count -
100                         offsetof(struct dlm_write_request32, i.lspace.name));
101         } else if (kb->cmd == DLM_USER_PURGE) {
102                 kb->i.purge.nodeid = kb32->i.purge.nodeid;
103                 kb->i.purge.pid = kb32->i.purge.pid;
104         } else {
105                 kb->i.lock.mode = kb32->i.lock.mode;
106                 kb->i.lock.namelen = kb32->i.lock.namelen;
107                 kb->i.lock.flags = kb32->i.lock.flags;
108                 kb->i.lock.lkid = kb32->i.lock.lkid;
109                 kb->i.lock.parent = kb32->i.lock.parent;
110                 kb->i.lock.xid = kb32->i.lock.xid;
111                 kb->i.lock.timeout = kb32->i.lock.timeout;
112                 kb->i.lock.castparam = (void *)(long)kb32->i.lock.castparam;
113                 kb->i.lock.castaddr = (void *)(long)kb32->i.lock.castaddr;
114                 kb->i.lock.bastparam = (void *)(long)kb32->i.lock.bastparam;
115                 kb->i.lock.bastaddr = (void *)(long)kb32->i.lock.bastaddr;
116                 kb->i.lock.lksb = (void *)(long)kb32->i.lock.lksb;
117                 memcpy(kb->i.lock.lvb, kb32->i.lock.lvb, DLM_USER_LVB_LEN);
118                 memcpy(kb->i.lock.name, kb32->i.lock.name, count -
119                         offsetof(struct dlm_write_request32, i.lock.name));
120         }
121 }
122
123 static void compat_output(struct dlm_lock_result *res,
124                           struct dlm_lock_result32 *res32)
125 {
126         res32->version[0] = res->version[0];
127         res32->version[1] = res->version[1];
128         res32->version[2] = res->version[2];
129
130         res32->user_astaddr = (__u32)(long)res->user_astaddr;
131         res32->user_astparam = (__u32)(long)res->user_astparam;
132         res32->user_lksb = (__u32)(long)res->user_lksb;
133         res32->bast_mode = res->bast_mode;
134
135         res32->lvb_offset = res->lvb_offset;
136         res32->length = res->length;
137
138         res32->lksb.sb_status = res->lksb.sb_status;
139         res32->lksb.sb_flags = res->lksb.sb_flags;
140         res32->lksb.sb_lkid = res->lksb.sb_lkid;
141         res32->lksb.sb_lvbptr = (__u32)(long)res->lksb.sb_lvbptr;
142 }
143 #endif
144
145 /* Figure out if this lock is at the end of its life and no longer
146    available for the application to use.  The lkb still exists until
147    the final ast is read.  A lock becomes EOL in three situations:
148      1. a noqueue request fails with EAGAIN
149      2. an unlock completes with EUNLOCK
150      3. a cancel of a waiting request completes with ECANCEL/EDEADLK
151    An EOL lock needs to be removed from the process's list of locks.
152    And we can't allow any new operation on an EOL lock.  This is
153    not related to the lifetime of the lkb struct which is managed
154    entirely by refcount. */
155
156 static int lkb_is_endoflife(struct dlm_lkb *lkb, int sb_status, int type)
157 {
158         switch (sb_status) {
159         case -DLM_EUNLOCK:
160                 return 1;
161         case -DLM_ECANCEL:
162         case -ETIMEDOUT:
163         case -EDEADLK:
164                 if (lkb->lkb_grmode == DLM_LOCK_IV)
165                         return 1;
166                 break;
167         case -EAGAIN:
168                 if (type == AST_COMP && lkb->lkb_grmode == DLM_LOCK_IV)
169                         return 1;
170                 break;
171         }
172         return 0;
173 }
174
175 /* we could possibly check if the cancel of an orphan has resulted in the lkb
176    being removed and then remove that lkb from the orphans list and free it */
177
178 void dlm_user_add_ast(struct dlm_lkb *lkb, int type, int bastmode)
179 {
180         struct dlm_ls *ls;
181         struct dlm_user_args *ua;
182         struct dlm_user_proc *proc;
183         int eol = 0, ast_type;
184
185         if (lkb->lkb_flags & (DLM_IFL_ORPHAN | DLM_IFL_DEAD))
186                 return;
187
188         ls = lkb->lkb_resource->res_ls;
189         mutex_lock(&ls->ls_clear_proc_locks);
190
191         /* If ORPHAN/DEAD flag is set, it means the process is dead so an ast
192            can't be delivered.  For ORPHAN's, dlm_clear_proc_locks() freed
193            lkb->ua so we can't try to use it.  This second check is necessary
194            for cases where a completion ast is received for an operation that
195            began before clear_proc_locks did its cancel/unlock. */
196
197         if (lkb->lkb_flags & (DLM_IFL_ORPHAN | DLM_IFL_DEAD))
198                 goto out;
199
200         DLM_ASSERT(lkb->lkb_ua, dlm_print_lkb(lkb););
201         ua = lkb->lkb_ua;
202         proc = ua->proc;
203
204         if (type == AST_BAST && ua->bastaddr == NULL)
205                 goto out;
206
207         spin_lock(&proc->asts_spin);
208
209         ast_type = lkb->lkb_ast_type;
210         lkb->lkb_ast_type |= type;
211         if (bastmode)
212                 lkb->lkb_bastmode = bastmode;
213
214         if (!ast_type) {
215                 kref_get(&lkb->lkb_ref);
216                 list_add_tail(&lkb->lkb_astqueue, &proc->asts);
217                 wake_up_interruptible(&proc->wait);
218         }
219         if (type == AST_COMP && (ast_type & AST_COMP))
220                 log_debug(ls, "ast overlap %x status %x %x",
221                           lkb->lkb_id, ua->lksb.sb_status, lkb->lkb_flags);
222
223         eol = lkb_is_endoflife(lkb, ua->lksb.sb_status, type);
224         if (eol) {
225                 lkb->lkb_ast_type &= ~AST_BAST;
226                 lkb->lkb_flags |= DLM_IFL_ENDOFLIFE;
227         }
228
229         /* We want to copy the lvb to userspace when the completion
230            ast is read if the status is 0, the lock has an lvb and
231            lvb_ops says we should.  We could probably have set_lvb_lock()
232            set update_user_lvb instead and not need old_mode */
233
234         if ((lkb->lkb_ast_type & AST_COMP) &&
235             (lkb->lkb_lksb->sb_status == 0) &&
236             lkb->lkb_lksb->sb_lvbptr &&
237             dlm_lvb_operations[ua->old_mode + 1][lkb->lkb_grmode + 1])
238                 ua->update_user_lvb = 1;
239         else
240                 ua->update_user_lvb = 0;
241
242         spin_unlock(&proc->asts_spin);
243
244         if (eol) {
245                 spin_lock(&proc->locks_spin);
246                 if (!list_empty(&lkb->lkb_ownqueue)) {
247                         list_del_init(&lkb->lkb_ownqueue);
248                         dlm_put_lkb(lkb);
249                 }
250                 spin_unlock(&proc->locks_spin);
251         }
252  out:
253         mutex_unlock(&ls->ls_clear_proc_locks);
254 }
255
256 static int device_user_lock(struct dlm_user_proc *proc,
257                             struct dlm_lock_params *params)
258 {
259         struct dlm_ls *ls;
260         struct dlm_user_args *ua;
261         int error = -ENOMEM;
262
263         ls = dlm_find_lockspace_local(proc->lockspace);
264         if (!ls)
265                 return -ENOENT;
266
267         if (!params->castaddr || !params->lksb) {
268                 error = -EINVAL;
269                 goto out;
270         }
271
272         ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
273         if (!ua)
274                 goto out;
275         ua->proc = proc;
276         ua->user_lksb = params->lksb;
277         ua->castparam = params->castparam;
278         ua->castaddr = params->castaddr;
279         ua->bastparam = params->bastparam;
280         ua->bastaddr = params->bastaddr;
281         ua->xid = params->xid;
282
283         if (params->flags & DLM_LKF_CONVERT)
284                 error = dlm_user_convert(ls, ua,
285                                          params->mode, params->flags,
286                                          params->lkid, params->lvb,
287                                          (unsigned long) params->timeout);
288         else {
289                 error = dlm_user_request(ls, ua,
290                                          params->mode, params->flags,
291                                          params->name, params->namelen,
292                                          (unsigned long) params->timeout);
293                 if (!error)
294                         error = ua->lksb.sb_lkid;
295         }
296  out:
297         dlm_put_lockspace(ls);
298         return error;
299 }
300
301 static int device_user_unlock(struct dlm_user_proc *proc,
302                               struct dlm_lock_params *params)
303 {
304         struct dlm_ls *ls;
305         struct dlm_user_args *ua;
306         int error = -ENOMEM;
307
308         ls = dlm_find_lockspace_local(proc->lockspace);
309         if (!ls)
310                 return -ENOENT;
311
312         ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
313         if (!ua)
314                 goto out;
315         ua->proc = proc;
316         ua->user_lksb = params->lksb;
317         ua->castparam = params->castparam;
318         ua->castaddr = params->castaddr;
319
320         if (params->flags & DLM_LKF_CANCEL)
321                 error = dlm_user_cancel(ls, ua, params->flags, params->lkid);
322         else
323                 error = dlm_user_unlock(ls, ua, params->flags, params->lkid,
324                                         params->lvb);
325  out:
326         dlm_put_lockspace(ls);
327         return error;
328 }
329
330 static int device_user_deadlock(struct dlm_user_proc *proc,
331                                 struct dlm_lock_params *params)
332 {
333         struct dlm_ls *ls;
334         int error;
335
336         ls = dlm_find_lockspace_local(proc->lockspace);
337         if (!ls)
338                 return -ENOENT;
339
340         error = dlm_user_deadlock(ls, params->flags, params->lkid);
341
342         dlm_put_lockspace(ls);
343         return error;
344 }
345
346 static int dlm_device_register(struct dlm_ls *ls, char *name)
347 {
348         int error, len;
349
350         /* The device is already registered.  This happens when the
351            lockspace is created multiple times from userspace. */
352         if (ls->ls_device.name)
353                 return 0;
354
355         error = -ENOMEM;
356         len = strlen(name) + strlen(name_prefix) + 2;
357         ls->ls_device.name = kzalloc(len, GFP_KERNEL);
358         if (!ls->ls_device.name)
359                 goto fail;
360
361         snprintf((char *)ls->ls_device.name, len, "%s_%s", name_prefix,
362                  name);
363         ls->ls_device.fops = &device_fops;
364         ls->ls_device.minor = MISC_DYNAMIC_MINOR;
365
366         error = misc_register(&ls->ls_device);
367         if (error) {
368                 kfree(ls->ls_device.name);
369         }
370 fail:
371         return error;
372 }
373
374 int dlm_device_deregister(struct dlm_ls *ls)
375 {
376         int error;
377
378         /* The device is not registered.  This happens when the lockspace
379            was never used from userspace, or when device_create_lockspace()
380            calls dlm_release_lockspace() after the register fails. */
381         if (!ls->ls_device.name)
382                 return 0;
383
384         error = misc_deregister(&ls->ls_device);
385         if (!error)
386                 kfree(ls->ls_device.name);
387         return error;
388 }
389
390 static int device_user_purge(struct dlm_user_proc *proc,
391                              struct dlm_purge_params *params)
392 {
393         struct dlm_ls *ls;
394         int error;
395
396         ls = dlm_find_lockspace_local(proc->lockspace);
397         if (!ls)
398                 return -ENOENT;
399
400         error = dlm_user_purge(ls, proc, params->nodeid, params->pid);
401
402         dlm_put_lockspace(ls);
403         return error;
404 }
405
406 static int device_create_lockspace(struct dlm_lspace_params *params)
407 {
408         dlm_lockspace_t *lockspace;
409         struct dlm_ls *ls;
410         int error;
411
412         if (!capable(CAP_SYS_ADMIN))
413                 return -EPERM;
414
415         error = dlm_new_lockspace(params->name, strlen(params->name),
416                                   &lockspace, params->flags, DLM_USER_LVB_LEN);
417         if (error)
418                 return error;
419
420         ls = dlm_find_lockspace_local(lockspace);
421         if (!ls)
422                 return -ENOENT;
423
424         error = dlm_device_register(ls, params->name);
425         dlm_put_lockspace(ls);
426
427         if (error)
428                 dlm_release_lockspace(lockspace, 0);
429         else
430                 error = ls->ls_device.minor;
431
432         return error;
433 }
434
435 static int device_remove_lockspace(struct dlm_lspace_params *params)
436 {
437         dlm_lockspace_t *lockspace;
438         struct dlm_ls *ls;
439         int error, force = 0;
440
441         if (!capable(CAP_SYS_ADMIN))
442                 return -EPERM;
443
444         ls = dlm_find_lockspace_device(params->minor);
445         if (!ls)
446                 return -ENOENT;
447
448         if (params->flags & DLM_USER_LSFLG_FORCEFREE)
449                 force = 2;
450
451         lockspace = ls->ls_local_handle;
452         dlm_put_lockspace(ls);
453
454         /* The final dlm_release_lockspace waits for references to go to
455            zero, so all processes will need to close their device for the
456            ls before the release will proceed.  release also calls the
457            device_deregister above.  Converting a positive return value
458            from release to zero means that userspace won't know when its
459            release was the final one, but it shouldn't need to know. */
460
461         error = dlm_release_lockspace(lockspace, force);
462         if (error > 0)
463                 error = 0;
464         return error;
465 }
466
467 /* Check the user's version matches ours */
468 static int check_version(struct dlm_write_request *req)
469 {
470         if (req->version[0] != DLM_DEVICE_VERSION_MAJOR ||
471             (req->version[0] == DLM_DEVICE_VERSION_MAJOR &&
472              req->version[1] > DLM_DEVICE_VERSION_MINOR)) {
473
474                 printk(KERN_DEBUG "dlm: process %s (%d) version mismatch "
475                        "user (%d.%d.%d) kernel (%d.%d.%d)\n",
476                        current->comm,
477                        task_pid_nr(current),
478                        req->version[0],
479                        req->version[1],
480                        req->version[2],
481                        DLM_DEVICE_VERSION_MAJOR,
482                        DLM_DEVICE_VERSION_MINOR,
483                        DLM_DEVICE_VERSION_PATCH);
484                 return -EINVAL;
485         }
486         return 0;
487 }
488
489 /*
490  * device_write
491  *
492  *   device_user_lock
493  *     dlm_user_request -> request_lock
494  *     dlm_user_convert -> convert_lock
495  *
496  *   device_user_unlock
497  *     dlm_user_unlock -> unlock_lock
498  *     dlm_user_cancel -> cancel_lock
499  *
500  *   device_create_lockspace
501  *     dlm_new_lockspace
502  *
503  *   device_remove_lockspace
504  *     dlm_release_lockspace
505  */
506
507 /* a write to a lockspace device is a lock or unlock request, a write
508    to the control device is to create/remove a lockspace */
509
510 static ssize_t device_write(struct file *file, const char __user *buf,
511                             size_t count, loff_t *ppos)
512 {
513         struct dlm_user_proc *proc = file->private_data;
514         struct dlm_write_request *kbuf;
515         sigset_t tmpsig, allsigs;
516         int error;
517
518 #ifdef CONFIG_COMPAT
519         if (count < sizeof(struct dlm_write_request32))
520 #else
521         if (count < sizeof(struct dlm_write_request))
522 #endif
523                 return -EINVAL;
524
525         kbuf = kzalloc(count + 1, GFP_KERNEL);
526         if (!kbuf)
527                 return -ENOMEM;
528
529         if (copy_from_user(kbuf, buf, count)) {
530                 error = -EFAULT;
531                 goto out_free;
532         }
533
534         if (check_version(kbuf)) {
535                 error = -EBADE;
536                 goto out_free;
537         }
538
539 #ifdef CONFIG_COMPAT
540         if (!kbuf->is64bit) {
541                 struct dlm_write_request32 *k32buf;
542                 k32buf = (struct dlm_write_request32 *)kbuf;
543                 kbuf = kmalloc(count + 1 + (sizeof(struct dlm_write_request) -
544                                sizeof(struct dlm_write_request32)), GFP_KERNEL);
545                 if (!kbuf) {
546                         kfree(k32buf);
547                         return -ENOMEM;
548                 }
549
550                 if (proc)
551                         set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);
552                 compat_input(kbuf, k32buf, count + 1);
553                 kfree(k32buf);
554         }
555 #endif
556
557         /* do we really need this? can a write happen after a close? */
558         if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
559             (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {
560                 error = -EINVAL;
561                 goto out_free;
562         }
563
564         sigfillset(&allsigs);
565         sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
566
567         error = -EINVAL;
568
569         switch (kbuf->cmd)
570         {
571         case DLM_USER_LOCK:
572                 if (!proc) {
573                         log_print("no locking on control device");
574                         goto out_sig;
575                 }
576                 error = device_user_lock(proc, &kbuf->i.lock);
577                 break;
578
579         case DLM_USER_UNLOCK:
580                 if (!proc) {
581                         log_print("no locking on control device");
582                         goto out_sig;
583                 }
584                 error = device_user_unlock(proc, &kbuf->i.lock);
585                 break;
586
587         case DLM_USER_DEADLOCK:
588                 if (!proc) {
589                         log_print("no locking on control device");
590                         goto out_sig;
591                 }
592                 error = device_user_deadlock(proc, &kbuf->i.lock);
593                 break;
594
595         case DLM_USER_CREATE_LOCKSPACE:
596                 if (proc) {
597                         log_print("create/remove only on control device");
598                         goto out_sig;
599                 }
600                 error = device_create_lockspace(&kbuf->i.lspace);
601                 break;
602
603         case DLM_USER_REMOVE_LOCKSPACE:
604                 if (proc) {
605                         log_print("create/remove only on control device");
606                         goto out_sig;
607                 }
608                 error = device_remove_lockspace(&kbuf->i.lspace);
609                 break;
610
611         case DLM_USER_PURGE:
612                 if (!proc) {
613                         log_print("no locking on control device");
614                         goto out_sig;
615                 }
616                 error = device_user_purge(proc, &kbuf->i.purge);
617                 break;
618
619         default:
620                 log_print("Unknown command passed to DLM device : %d\n",
621                           kbuf->cmd);
622         }
623
624  out_sig:
625         sigprocmask(SIG_SETMASK, &tmpsig, NULL);
626         recalc_sigpending();
627  out_free:
628         kfree(kbuf);
629         return error;
630 }
631
632 /* Every process that opens the lockspace device has its own "proc" structure
633    hanging off the open file that's used to keep track of locks owned by the
634    process and asts that need to be delivered to the process. */
635
636 static int device_open(struct inode *inode, struct file *file)
637 {
638         struct dlm_user_proc *proc;
639         struct dlm_ls *ls;
640
641         ls = dlm_find_lockspace_device(iminor(inode));
642         if (!ls)
643                 return -ENOENT;
644
645         proc = kzalloc(sizeof(struct dlm_user_proc), GFP_KERNEL);
646         if (!proc) {
647                 dlm_put_lockspace(ls);
648                 return -ENOMEM;
649         }
650
651         proc->lockspace = ls->ls_local_handle;
652         INIT_LIST_HEAD(&proc->asts);
653         INIT_LIST_HEAD(&proc->locks);
654         INIT_LIST_HEAD(&proc->unlocking);
655         spin_lock_init(&proc->asts_spin);
656         spin_lock_init(&proc->locks_spin);
657         init_waitqueue_head(&proc->wait);
658         file->private_data = proc;
659
660         return 0;
661 }
662
663 static int device_close(struct inode *inode, struct file *file)
664 {
665         struct dlm_user_proc *proc = file->private_data;
666         struct dlm_ls *ls;
667         sigset_t tmpsig, allsigs;
668
669         ls = dlm_find_lockspace_local(proc->lockspace);
670         if (!ls)
671                 return -ENOENT;
672
673         sigfillset(&allsigs);
674         sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
675
676         set_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags);
677
678         dlm_clear_proc_locks(ls, proc);
679
680         /* at this point no more lkb's should exist for this lockspace,
681            so there's no chance of dlm_user_add_ast() being called and
682            looking for lkb->ua->proc */
683
684         kfree(proc);
685         file->private_data = NULL;
686
687         dlm_put_lockspace(ls);
688         dlm_put_lockspace(ls);  /* for the find in device_open() */
689
690         /* FIXME: AUTOFREE: if this ls is no longer used do
691            device_remove_lockspace() */
692
693         sigprocmask(SIG_SETMASK, &tmpsig, NULL);
694         recalc_sigpending();
695
696         return 0;
697 }
698
699 static int copy_result_to_user(struct dlm_user_args *ua, int compat, int type,
700                                int bmode, char __user *buf, size_t count)
701 {
702 #ifdef CONFIG_COMPAT
703         struct dlm_lock_result32 result32;
704 #endif
705         struct dlm_lock_result result;
706         void *resultptr;
707         int error=0;
708         int len;
709         int struct_len;
710
711         memset(&result, 0, sizeof(struct dlm_lock_result));
712         result.version[0] = DLM_DEVICE_VERSION_MAJOR;
713         result.version[1] = DLM_DEVICE_VERSION_MINOR;
714         result.version[2] = DLM_DEVICE_VERSION_PATCH;
715         memcpy(&result.lksb, &ua->lksb, sizeof(struct dlm_lksb));
716         result.user_lksb = ua->user_lksb;
717
718         /* FIXME: dlm1 provides for the user's bastparam/addr to not be updated
719            in a conversion unless the conversion is successful.  See code
720            in dlm_user_convert() for updating ua from ua_tmp.  OpenVMS, though,
721            notes that a new blocking AST address and parameter are set even if
722            the conversion fails, so maybe we should just do that. */
723
724         if (type == AST_BAST) {
725                 result.user_astaddr = ua->bastaddr;
726                 result.user_astparam = ua->bastparam;
727                 result.bast_mode = bmode;
728         } else {
729                 result.user_astaddr = ua->castaddr;
730                 result.user_astparam = ua->castparam;
731         }
732
733 #ifdef CONFIG_COMPAT
734         if (compat)
735                 len = sizeof(struct dlm_lock_result32);
736         else
737 #endif
738                 len = sizeof(struct dlm_lock_result);
739         struct_len = len;
740
741         /* copy lvb to userspace if there is one, it's been updated, and
742            the user buffer has space for it */
743
744         if (ua->update_user_lvb && ua->lksb.sb_lvbptr &&
745             count >= len + DLM_USER_LVB_LEN) {
746                 if (copy_to_user(buf+len, ua->lksb.sb_lvbptr,
747                                  DLM_USER_LVB_LEN)) {
748                         error = -EFAULT;
749                         goto out;
750                 }
751
752                 result.lvb_offset = len;
753                 len += DLM_USER_LVB_LEN;
754         }
755
756         result.length = len;
757         resultptr = &result;
758 #ifdef CONFIG_COMPAT
759         if (compat) {
760                 compat_output(&result, &result32);
761                 resultptr = &result32;
762         }
763 #endif
764
765         if (copy_to_user(buf, resultptr, struct_len))
766                 error = -EFAULT;
767         else
768                 error = len;
769  out:
770         return error;
771 }
772
773 static int copy_version_to_user(char __user *buf, size_t count)
774 {
775         struct dlm_device_version ver;
776
777         memset(&ver, 0, sizeof(struct dlm_device_version));
778         ver.version[0] = DLM_DEVICE_VERSION_MAJOR;
779         ver.version[1] = DLM_DEVICE_VERSION_MINOR;
780         ver.version[2] = DLM_DEVICE_VERSION_PATCH;
781
782         if (copy_to_user(buf, &ver, sizeof(struct dlm_device_version)))
783                 return -EFAULT;
784         return sizeof(struct dlm_device_version);
785 }
786
787 /* a read returns a single ast described in a struct dlm_lock_result */
788
789 static ssize_t device_read(struct file *file, char __user *buf, size_t count,
790                            loff_t *ppos)
791 {
792         struct dlm_user_proc *proc = file->private_data;
793         struct dlm_lkb *lkb;
794         DECLARE_WAITQUEUE(wait, current);
795         int error, type=0, bmode=0, removed = 0;
796
797         if (count == sizeof(struct dlm_device_version)) {
798                 error = copy_version_to_user(buf, count);
799                 return error;
800         }
801
802         if (!proc) {
803                 log_print("non-version read from control device %zu", count);
804                 return -EINVAL;
805         }
806
807 #ifdef CONFIG_COMPAT
808         if (count < sizeof(struct dlm_lock_result32))
809 #else
810         if (count < sizeof(struct dlm_lock_result))
811 #endif
812                 return -EINVAL;
813
814         /* do we really need this? can a read happen after a close? */
815         if (test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))
816                 return -EINVAL;
817
818         spin_lock(&proc->asts_spin);
819         if (list_empty(&proc->asts)) {
820                 if (file->f_flags & O_NONBLOCK) {
821                         spin_unlock(&proc->asts_spin);
822                         return -EAGAIN;
823                 }
824
825                 add_wait_queue(&proc->wait, &wait);
826
827         repeat:
828                 set_current_state(TASK_INTERRUPTIBLE);
829                 if (list_empty(&proc->asts) && !signal_pending(current)) {
830                         spin_unlock(&proc->asts_spin);
831                         schedule();
832                         spin_lock(&proc->asts_spin);
833                         goto repeat;
834                 }
835                 set_current_state(TASK_RUNNING);
836                 remove_wait_queue(&proc->wait, &wait);
837
838                 if (signal_pending(current)) {
839                         spin_unlock(&proc->asts_spin);
840                         return -ERESTARTSYS;
841                 }
842         }
843
844         /* there may be both completion and blocking asts to return for
845            the lkb, don't remove lkb from asts list unless no asts remain */
846
847         lkb = list_entry(proc->asts.next, struct dlm_lkb, lkb_astqueue);
848
849         if (lkb->lkb_ast_type & AST_COMP) {
850                 lkb->lkb_ast_type &= ~AST_COMP;
851                 type = AST_COMP;
852         } else if (lkb->lkb_ast_type & AST_BAST) {
853                 lkb->lkb_ast_type &= ~AST_BAST;
854                 type = AST_BAST;
855                 bmode = lkb->lkb_bastmode;
856         }
857
858         if (!lkb->lkb_ast_type) {
859                 list_del(&lkb->lkb_astqueue);
860                 removed = 1;
861         }
862         spin_unlock(&proc->asts_spin);
863
864         error = copy_result_to_user(lkb->lkb_ua,
865                                 test_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags),
866                                 type, bmode, buf, count);
867
868         /* removes reference for the proc->asts lists added by
869            dlm_user_add_ast() and may result in the lkb being freed */
870         if (removed)
871                 dlm_put_lkb(lkb);
872
873         return error;
874 }
875
876 static unsigned int device_poll(struct file *file, poll_table *wait)
877 {
878         struct dlm_user_proc *proc = file->private_data;
879
880         poll_wait(file, &proc->wait, wait);
881
882         spin_lock(&proc->asts_spin);
883         if (!list_empty(&proc->asts)) {
884                 spin_unlock(&proc->asts_spin);
885                 return POLLIN | POLLRDNORM;
886         }
887         spin_unlock(&proc->asts_spin);
888         return 0;
889 }
890
891 int dlm_user_daemon_available(void)
892 {
893         /* dlm_controld hasn't started (or, has started, but not
894            properly populated configfs) */
895
896         if (!dlm_our_nodeid())
897                 return 0;
898
899         /* This is to deal with versions of dlm_controld that don't
900            know about the monitor device.  We assume that if the
901            dlm_controld was started (above), but the monitor device
902            was never opened, that it's an old version.  dlm_controld
903            should open the monitor device before populating configfs. */
904
905         if (dlm_monitor_unused)
906                 return 1;
907
908         return atomic_read(&dlm_monitor_opened) ? 1 : 0;
909 }
910
911 static int ctl_device_open(struct inode *inode, struct file *file)
912 {
913         file->private_data = NULL;
914         return 0;
915 }
916
917 static int ctl_device_close(struct inode *inode, struct file *file)
918 {
919         return 0;
920 }
921
922 static int monitor_device_open(struct inode *inode, struct file *file)
923 {
924         atomic_inc(&dlm_monitor_opened);
925         dlm_monitor_unused = 0;
926         return 0;
927 }
928
929 static int monitor_device_close(struct inode *inode, struct file *file)
930 {
931         if (atomic_dec_and_test(&dlm_monitor_opened))
932                 dlm_stop_lockspaces();
933         return 0;
934 }
935
936 static const struct file_operations device_fops = {
937         .open    = device_open,
938         .release = device_close,
939         .read    = device_read,
940         .write   = device_write,
941         .poll    = device_poll,
942         .owner   = THIS_MODULE,
943 };
944
945 static const struct file_operations ctl_device_fops = {
946         .open    = ctl_device_open,
947         .release = ctl_device_close,
948         .read    = device_read,
949         .write   = device_write,
950         .owner   = THIS_MODULE,
951 };
952
953 static struct miscdevice ctl_device = {
954         .name  = "dlm-control",
955         .fops  = &ctl_device_fops,
956         .minor = MISC_DYNAMIC_MINOR,
957 };
958
959 static const struct file_operations monitor_device_fops = {
960         .open    = monitor_device_open,
961         .release = monitor_device_close,
962         .owner   = THIS_MODULE,
963 };
964
965 static struct miscdevice monitor_device = {
966         .name  = "dlm-monitor",
967         .fops  = &monitor_device_fops,
968         .minor = MISC_DYNAMIC_MINOR,
969 };
970
971 int __init dlm_user_init(void)
972 {
973         int error;
974
975         atomic_set(&dlm_monitor_opened, 0);
976
977         error = misc_register(&ctl_device);
978         if (error) {
979                 log_print("misc_register failed for control device");
980                 goto out;
981         }
982
983         error = misc_register(&monitor_device);
984         if (error) {
985                 log_print("misc_register failed for monitor device");
986                 misc_deregister(&ctl_device);
987         }
988  out:
989         return error;
990 }
991
992 void dlm_user_exit(void)
993 {
994         misc_deregister(&ctl_device);
995         misc_deregister(&monitor_device);
996 }
997