SAFE public projects git trees. - safe/jmp/linux-2.6/blob - firmware/Makefile

   1 #
   2 # kbuild file for firmware/
   3 #
   4
   5 # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
   6 # leading /, it's relative to $(srctree).
   7 fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
   8 fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
   9
  10 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
  11
  12 # There are three cases to care about:
  13 # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
  14 #    include the firmware files to include, according to .config
  15 # 2. 'make modules_install', which will install firmware for modules, and
  16 #    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
  17 # 3. 'make firmware_install', which installs all firmware, unconditionally.
  18
  19 # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
  20 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
  21 # But be aware that the config file might not be included at all.
  22
  23
  24 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
  25
  26 # Directories which we _might_ need to create, so we have a rule for them.
  27 firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
  28
  29 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
  30       cmd_mkdir = mkdir -p $@
  31
  32 quiet_cmd_ihex  = IHEX    $@
  33       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
  34
  35 quiet_cmd_ihex2fw  = IHEX2FW $@
  36       cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
  37
  38 quiet_cmd_h16tofw  = H16TOFW $@
  39       cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
  40
  41 quiet_cmd_fwbin = MK_FW   $@
  42       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";                \
  43                   FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
  44                                 firmware/%.gen.S,%,$@))))";                  \
  45                   ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);                \
  46                   ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);                       \
  47                   PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;                  \
  48                   echo "/* Generated by firmware/Makefile */"           > $@;\
  49                   echo "    .section .rodata"                           >>$@;\
  50                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
  51                   echo "_fw_$${FWSTR}_bin:"                             >>$@;\
  52                   echo "    .incbin \"$(2)\""                           >>$@;\
  53                   echo "_fw_end:"                                       >>$@;\
  54                   echo "   .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
  55                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
  56                   echo "_fw_$${FWSTR}_name:"                            >>$@;\
  57                   echo "    .string \"$$FWNAME\""                       >>$@;\
  58                   echo "    .section .builtin_fw,\"a\",$${PROGBITS}"    >>$@;\
  59                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
  60                   echo "    $${ASM_WORD} _fw_$${FWSTR}_name"            >>$@;\
  61                   echo "    $${ASM_WORD} _fw_$${FWSTR}_bin"             >>$@;\
  62                   echo "    $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin"   >>$@;
  63
  64 # One of these files will change, or come into existence, whenever
  65 # the configuration changes between 32-bit and 64-bit. The .S files
  66 # need to change when that happens.
  67 wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
  68                 include/config/ppc32.h include/config/ppc64.h \
  69                 include/config/superh32.h include/config/superh64.h \
  70                 include/config/x86_32.h include/config/x86_64.h)
  71
  72 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
  73 # It'll end up depending on these targets, so make them a PHONY rule which
  74 # depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
  75 PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
  76 $(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
  77         @true
  78
  79 # For the $$(dir %) trick, where we need % to be expanded first.
  80 .SECONDEXPANSION:
  81
  82 $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
  83                 | $(objtree)/$$(dir %)
  84         $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
  85 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
  86                 include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
  87         $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
  88
  89 # The .o files depend on the binaries directly; the .S files don't.
  90 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
  91 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
  92
  93 # .ihex is used just as a simple way to hold binary files in a source tree
  94 # where binaries are frowned upon. They are directly converted with objcopy.
  95 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
  96         $(call cmd,ihex)
  97
  98 # .HEX is also Intel HEX, but where the offset and length in each record
  99 # is actually meaningful, because the firmware has to be loaded in a certain
 100 # order rather than as a single binary blob. Thus, we convert them into our
 101 # more compact binary representation of ihex records (<linux/ihex.h>)
 102 $(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
 103         $(call cmd,ihex2fw)
 104
 105 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
 106 $(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
 107         $(call cmd,h16tofw)
 108
 109 $(firmware-dirs):
 110         $(call cmd,mkdir)
 111
 112 obj-y                            += $(patsubst %,%.gen.o, $(fw-external-y))
 113 obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
 114
 115 # Remove .S files and binaries created from ihex
 116 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
 117 targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
 118                                 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
 119
 120 # Without this, built-in.o won't be created when it's empty, and the
 121 # final vmlinux link will fail.
 122 obj-n := dummy
 123
 124 hostprogs-y := ihex2fw