SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/usb/serial/usb-serial.c

   1 /*
   2  * USB Serial Converter driver
   3  *
   4  * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
   5  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
   6  * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
   7  *
   8  *      This program is free software; you can redistribute it and/or
   9  *      modify it under the terms of the GNU General Public License version
  10  *      2 as published by the Free Software Foundation.
  11  *
  12  * This driver was originally based on the ACM driver by Armin Fuerst (which was
  13  * based on a driver by Brad Keryan)
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this
  16  * driver
  17  *
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/errno.h>
  22 #include <linux/init.h>
  23 #include <linux/slab.h>
  24 #include <linux/smp_lock.h>
  25 #include <linux/tty.h>
  26 #include <linux/tty_driver.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/seq_file.h>
  31 #include <linux/spinlock.h>
  32 #include <linux/mutex.h>
  33 #include <linux/list.h>
  34 #include <linux/uaccess.h>
  35 #include <linux/serial.h>
  36 #include <linux/usb.h>
  37 #include <linux/usb/serial.h>
  38 #include <linux/kfifo.h>
  39 #include "pl2303.h"
  40
  41 /*
  42  * Version Information
  43  */
  44 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
  45 #define DRIVER_DESC "USB Serial Driver core"
  46
  47 /* Driver structure we register with the USB core */
  48 static struct usb_driver usb_serial_driver = {
  49         .name =         "usbserial",
  50         .probe =        usb_serial_probe,
  51         .disconnect =   usb_serial_disconnect,
  52         .suspend =      usb_serial_suspend,
  53         .resume =       usb_serial_resume,
  54         .no_dynamic_id =        1,
  55 };
  56
  57 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
  58    the MODULE_DEVICE_TABLE declarations in each serial driver
  59    cause the "hotplug" program to pull in whatever module is necessary
  60    via modprobe, and modprobe will load usbserial because the serial
  61    drivers depend on it.
  62 */
  63
  64 static int debug;
  65 /* initially all NULL */
  66 static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
  67 static DEFINE_MUTEX(table_lock);
  68 static LIST_HEAD(usb_serial_driver_list);
  69
  70 /*
  71  * Look up the serial structure.  If it is found and it hasn't been
  72  * disconnected, return with its disc_mutex held and its refcount
  73  * incremented.  Otherwise return NULL.
  74  */
  75 struct usb_serial *usb_serial_get_by_index(unsigned index)
  76 {
  77         struct usb_serial *serial;
  78
  79         mutex_lock(&table_lock);
  80         serial = serial_table[index];
  81
  82         if (serial) {
  83                 mutex_lock(&serial->disc_mutex);
  84                 if (serial->disconnected) {
  85                         mutex_unlock(&serial->disc_mutex);
  86                         serial = NULL;
  87                 } else {
  88                         kref_get(&serial->kref);
  89                 }
  90         }
  91         mutex_unlock(&table_lock);
  92         return serial;
  93 }
  94
  95 static struct usb_serial *get_free_serial(struct usb_serial *serial,
  96                                         int num_ports, unsigned int *minor)
  97 {
  98         unsigned int i, j;
  99         int good_spot;
 100
 101         dbg("%s %d", __func__, num_ports);
 102
 103         *minor = 0;
 104         mutex_lock(&table_lock);
 105         for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
 106                 if (serial_table[i])
 107                         continue;
 108
 109                 good_spot = 1;
 110                 for (j = 1; j <= num_ports-1; ++j)
 111                         if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) {
 112                                 good_spot = 0;
 113                                 i += j;
 114                                 break;
 115                         }
 116                 if (good_spot == 0)
 117                         continue;
 118
 119                 *minor = i;
 120                 j = 0;
 121                 dbg("%s - minor base = %d", __func__, *minor);
 122                 for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
 123                         serial_table[i] = serial;
 124                         serial->port[j++]->number = i;
 125                 }
 126                 mutex_unlock(&table_lock);
 127                 return serial;
 128         }
 129         mutex_unlock(&table_lock);
 130         return NULL;
 131 }
 132
 133 static void return_serial(struct usb_serial *serial)
 134 {
 135         int i;
 136
 137         dbg("%s", __func__);
 138
 139         mutex_lock(&table_lock);
 140         for (i = 0; i < serial->num_ports; ++i)
 141                 serial_table[serial->minor + i] = NULL;
 142         mutex_unlock(&table_lock);
 143 }
 144
 145 static void destroy_serial(struct kref *kref)
 146 {
 147         struct usb_serial *serial;
 148         struct usb_serial_port *port;
 149         int i;
 150
 151         serial = to_usb_serial(kref);
 152
 153         dbg("%s - %s", __func__, serial->type->description);
 154
 155         /* return the minor range that this device had */
 156         if (serial->minor != SERIAL_TTY_NO_MINOR)
 157                 return_serial(serial);
 158
 159         if (serial->attached)
 160                 serial->type->release(serial);
 161
 162         /* Now that nothing is using the ports, they can be freed */
 163         for (i = 0; i < serial->num_port_pointers; ++i) {
 164                 port = serial->port[i];
 165                 if (port) {
 166                         port->serial = NULL;
 167                         put_device(&port->dev);
 168                 }
 169         }
 170
 171         usb_put_dev(serial->dev);
 172         kfree(serial);
 173 }
 174
 175 void usb_serial_put(struct usb_serial *serial)
 176 {
 177         kref_put(&serial->kref, destroy_serial);
 178 }
 179
 180 /*****************************************************************************
 181  * Driver tty interface functions
 182  *****************************************************************************/
 183
 184 /**
 185  * serial_install - install tty
 186  * @driver: the driver (USB in our case)
 187  * @tty: the tty being created
 188  *
 189  * Create the termios objects for this tty.  We use the default
 190  * USB serial settings but permit them to be overridden by
 191  * serial->type->init_termios.
 192  *
 193  * This is the first place a new tty gets used.  Hence this is where we
 194  * acquire references to the usb_serial structure and the driver module,
 195  * where we store a pointer to the port, and where we do an autoresume.
 196  * All these actions are reversed in serial_cleanup().
 197  */
 198 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 199 {
 200         int idx = tty->index;
 201         struct usb_serial *serial;
 202         struct usb_serial_port *port;
 203         int retval = -ENODEV;
 204
 205         dbg("%s", __func__);
 206
 207         serial = usb_serial_get_by_index(idx);
 208         if (!serial)
 209                 return retval;
 210
 211         port = serial->port[idx - serial->minor];
 212         if (!port)
 213                 goto error_no_port;
 214         if (!try_module_get(serial->type->driver.owner))
 215                 goto error_module_get;
 216
 217         /* perform the standard setup */
 218         retval = tty_init_termios(tty);
 219         if (retval)
 220                 goto error_init_termios;
 221
 222         retval = usb_autopm_get_interface(serial->interface);
 223         if (retval)
 224                 goto error_get_interface;
 225
 226         mutex_unlock(&serial->disc_mutex);
 227
 228         /* allow the driver to update the settings */
 229         if (serial->type->init_termios)
 230                 serial->type->init_termios(tty);
 231
 232         tty->driver_data = port;
 233
 234         /* Final install (we use the default method) */
 235         tty_driver_kref_get(driver);
 236         tty->count++;
 237         driver->ttys[idx] = tty;
 238         return retval;
 239
 240  error_get_interface:
 241  error_init_termios:
 242         module_put(serial->type->driver.owner);
 243  error_module_get:
 244  error_no_port:
 245         usb_serial_put(serial);
 246         mutex_unlock(&serial->disc_mutex);
 247         return retval;
 248 }
 249
 250 static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
 251 {
 252         struct usb_serial_port *port =
 253                 container_of(tport, struct usb_serial_port, port);
 254         struct usb_serial *serial = port->serial;
 255         int retval;
 256
 257         mutex_lock(&serial->disc_mutex);
 258         if (serial->disconnected)
 259                 retval = -ENODEV;
 260         else
 261                 retval = port->serial->type->open(tty, port);
 262         mutex_unlock(&serial->disc_mutex);
 263         return retval;
 264 }
 265
 266 static int serial_open(struct tty_struct *tty, struct file *filp)
 267 {
 268         struct usb_serial_port *port = tty->driver_data;
 269
 270         dbg("%s - port %d", __func__, port->number);
 271         return tty_port_open(&port->port, tty, filp);
 272 }
 273
 274 /**
 275  * serial_down - shut down hardware
 276  * @tport: tty port to shut down
 277  *
 278  * Shut down a USB serial port unless it is the console.  We never
 279  * shut down the console hardware as it will always be in use. Serialized
 280  * against activate by the tport mutex and kept to matching open/close pairs
 281  * of calls by the ASYNCB_INITIALIZED flag.
 282  */
 283 static void serial_down(struct tty_port *tport)
 284 {
 285         struct usb_serial_port *port =
 286                 container_of(tport, struct usb_serial_port, port);
 287         struct usb_serial_driver *drv = port->serial->type;
 288         /*
 289          * The console is magical.  Do not hang up the console hardware
 290          * or there will be tears.
 291          */
 292         if (port->console)
 293                 return;
 294         if (drv->close)
 295                 drv->close(port);
 296 }
 297
 298 static void serial_hangup(struct tty_struct *tty)
 299 {
 300         struct usb_serial_port *port = tty->driver_data;
 301         dbg("%s - port %d", __func__, port->number);
 302         tty_port_hangup(&port->port);
 303 }
 304
 305 static void serial_close(struct tty_struct *tty, struct file *filp)
 306 {
 307         struct usb_serial_port *port = tty->driver_data;
 308         dbg("%s - port %d", __func__, port->number);
 309         tty_port_close(&port->port, tty, filp);
 310 }
 311
 312 /**
 313  * serial_cleanup - free resources post close/hangup
 314  * @port: port to free up
 315  *
 316  * Do the resource freeing and refcount dropping for the port.
 317  * Avoid freeing the console.
 318  *
 319  * Called asynchronously after the last tty kref is dropped,
 320  * and the tty layer has already done the tty_shutdown(tty);
 321  */
 322 static void serial_cleanup(struct tty_struct *tty)
 323 {
 324         struct usb_serial_port *port = tty->driver_data;
 325         struct usb_serial *serial;
 326         struct module *owner;
 327
 328         /* The console is magical.  Do not hang up the console hardware
 329          * or there will be tears.
 330          */
 331         if (port->console)
 332                 return;
 333
 334         dbg("%s - port %d", __func__, port->number);
 335
 336         tty->driver_data = NULL;
 337
 338         serial = port->serial;
 339         owner = serial->type->driver.owner;
 340
 341         mutex_lock(&serial->disc_mutex);
 342         if (!serial->disconnected)
 343                 usb_autopm_put_interface(serial->interface);
 344         mutex_unlock(&serial->disc_mutex);
 345
 346         usb_serial_put(serial);
 347         module_put(owner);
 348 }
 349
 350 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
 351                                                                 int count)
 352 {
 353         struct usb_serial_port *port = tty->driver_data;
 354         int retval = -ENODEV;
 355
 356         if (port->serial->dev->state == USB_STATE_NOTATTACHED)
 357                 goto exit;
 358
 359         dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 360
 361         /* pass on to the driver specific version of this function */
 362         retval = port->serial->type->write(tty, port, buf, count);
 363
 364 exit:
 365         return retval;
 366 }
 367
 368 static int serial_write_room(struct tty_struct *tty)
 369 {
 370         struct usb_serial_port *port = tty->driver_data;
 371         dbg("%s - port %d", __func__, port->number);
 372         /* pass on to the driver specific version of this function */
 373         return port->serial->type->write_room(tty);
 374 }
 375
 376 static int serial_chars_in_buffer(struct tty_struct *tty)
 377 {
 378         struct usb_serial_port *port = tty->driver_data;
 379         dbg("%s - port %d", __func__, port->number);
 380
 381         /* if the device was unplugged then any remaining characters
 382            fell out of the connector ;) */
 383         if (port->serial->disconnected)
 384                 return 0;
 385         /* pass on to the driver specific version of this function */
 386         return port->serial->type->chars_in_buffer(tty);
 387 }
 388
 389 static void serial_throttle(struct tty_struct *tty)
 390 {
 391         struct usb_serial_port *port = tty->driver_data;
 392         dbg("%s - port %d", __func__, port->number);
 393
 394         /* pass on to the driver specific version of this function */
 395         if (port->serial->type->throttle)
 396                 port->serial->type->throttle(tty);
 397 }
 398
 399 static void serial_unthrottle(struct tty_struct *tty)
 400 {
 401         struct usb_serial_port *port = tty->driver_data;
 402         dbg("%s - port %d", __func__, port->number);
 403
 404         /* pass on to the driver specific version of this function */
 405         if (port->serial->type->unthrottle)
 406                 port->serial->type->unthrottle(tty);
 407 }
 408
 409 static int serial_ioctl(struct tty_struct *tty, struct file *file,
 410                                         unsigned int cmd, unsigned long arg)
 411 {
 412         struct usb_serial_port *port = tty->driver_data;
 413         int retval = -ENODEV;
 414
 415         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 416
 417         /* pass on to the driver specific version of this function
 418            if it is available */
 419         if (port->serial->type->ioctl) {
 420                 retval = port->serial->type->ioctl(tty, file, cmd, arg);
 421         } else
 422                 retval = -ENOIOCTLCMD;
 423         return retval;
 424 }
 425
 426 static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 427 {
 428         struct usb_serial_port *port = tty->driver_data;
 429         dbg("%s - port %d", __func__, port->number);
 430
 431         /* pass on to the driver specific version of this function
 432            if it is available */
 433         if (port->serial->type->set_termios)
 434                 port->serial->type->set_termios(tty, port, old);
 435         else
 436                 tty_termios_copy_hw(tty->termios, old);
 437 }
 438
 439 static int serial_break(struct tty_struct *tty, int break_state)
 440 {
 441         struct usb_serial_port *port = tty->driver_data;
 442
 443         dbg("%s - port %d", __func__, port->number);
 444
 445         /* pass on to the driver specific version of this function
 446            if it is available */
 447         if (port->serial->type->break_ctl)
 448                 port->serial->type->break_ctl(tty, break_state);
 449         return 0;
 450 }
 451
 452 static int serial_proc_show(struct seq_file *m, void *v)
 453 {
 454         struct usb_serial *serial;
 455         int i;
 456         char tmp[40];
 457
 458         dbg("%s", __func__);
 459         seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
 460         for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
 461                 serial = usb_serial_get_by_index(i);
 462                 if (serial == NULL)
 463                         continue;
 464
 465                 seq_printf(m, "%d:", i);
 466                 if (serial->type->driver.owner)
 467                         seq_printf(m, " module:%s",
 468                                 module_name(serial->type->driver.owner));
 469                 seq_printf(m, " name:\"%s\"",
 470                                 serial->type->description);
 471                 seq_printf(m, " vendor:%04x product:%04x",
 472                         le16_to_cpu(serial->dev->descriptor.idVendor),
 473                         le16_to_cpu(serial->dev->descriptor.idProduct));
 474                 seq_printf(m, " num_ports:%d", serial->num_ports);
 475                 seq_printf(m, " port:%d", i - serial->minor + 1);
 476                 usb_make_path(serial->dev, tmp, sizeof(tmp));
 477                 seq_printf(m, " path:%s", tmp);
 478
 479                 seq_putc(m, '\n');
 480                 usb_serial_put(serial);
 481                 mutex_unlock(&serial->disc_mutex);
 482         }
 483         return 0;
 484 }
 485
 486 static int serial_proc_open(struct inode *inode, struct file *file)
 487 {
 488         return single_open(file, serial_proc_show, NULL);
 489 }
 490
 491 static const struct file_operations serial_proc_fops = {
 492         .owner          = THIS_MODULE,
 493         .open           = serial_proc_open,
 494         .read           = seq_read,
 495         .llseek         = seq_lseek,
 496         .release        = single_release,
 497 };
 498
 499 static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 500 {
 501         struct usb_serial_port *port = tty->driver_data;
 502
 503         dbg("%s - port %d", __func__, port->number);
 504
 505         if (port->serial->type->tiocmget)
 506                 return port->serial->type->tiocmget(tty, file);
 507         return -EINVAL;
 508 }
 509
 510 static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 511                             unsigned int set, unsigned int clear)
 512 {
 513         struct usb_serial_port *port = tty->driver_data;
 514
 515         dbg("%s - port %d", __func__, port->number);
 516
 517         if (port->serial->type->tiocmset)
 518                 return port->serial->type->tiocmset(tty, file, set, clear);
 519         return -EINVAL;
 520 }
 521
 522 /*
 523  * We would be calling tty_wakeup here, but unfortunately some line
 524  * disciplines have an annoying habit of calling tty->write from
 525  * the write wakeup callback (e.g. n_hdlc.c).
 526  */
 527 void usb_serial_port_softint(struct usb_serial_port *port)
 528 {
 529         schedule_work(&port->work);
 530 }
 531 EXPORT_SYMBOL_GPL(usb_serial_port_softint);
 532
 533 static void usb_serial_port_work(struct work_struct *work)
 534 {
 535         struct usb_serial_port *port =
 536                 container_of(work, struct usb_serial_port, work);
 537         struct tty_struct *tty;
 538
 539         dbg("%s - port %d", __func__, port->number);
 540
 541         tty = tty_port_tty_get(&port->port);
 542         if (!tty)
 543                 return;
 544
 545         tty_wakeup(tty);
 546         tty_kref_put(tty);
 547 }
 548
 549 static void kill_traffic(struct usb_serial_port *port)
 550 {
 551         usb_kill_urb(port->read_urb);
 552         usb_kill_urb(port->write_urb);
 553         /*
 554          * This is tricky.
 555          * Some drivers submit the read_urb in the
 556          * handler for the write_urb or vice versa
 557          * this order determines the order in which
 558          * usb_kill_urb() must be used to reliably
 559          * kill the URBs. As it is unknown here,
 560          * both orders must be used in turn.
 561          * The call below is not redundant.
 562          */
 563         usb_kill_urb(port->read_urb);
 564         usb_kill_urb(port->interrupt_in_urb);
 565         usb_kill_urb(port->interrupt_out_urb);
 566 }
 567
 568 static void port_release(struct device *dev)
 569 {
 570         struct usb_serial_port *port = to_usb_serial_port(dev);
 571
 572         dbg ("%s - %s", __func__, dev_name(dev));
 573
 574         /*
 575          * Stop all the traffic before cancelling the work, so that
 576          * nobody will restart it by calling usb_serial_port_softint.
 577          */
 578         kill_traffic(port);
 579         cancel_work_sync(&port->work);
 580
 581         usb_free_urb(port->read_urb);
 582         usb_free_urb(port->write_urb);
 583         usb_free_urb(port->interrupt_in_urb);
 584         usb_free_urb(port->interrupt_out_urb);
 585         kfifo_free(&port->write_fifo);
 586         kfree(port->bulk_in_buffer);
 587         kfree(port->bulk_out_buffer);
 588         kfree(port->interrupt_in_buffer);
 589         kfree(port->interrupt_out_buffer);
 590         kfree(port);
 591 }
 592
 593 static struct usb_serial *create_serial(struct usb_device *dev,
 594                                         struct usb_interface *interface,
 595                                         struct usb_serial_driver *driver)
 596 {
 597         struct usb_serial *serial;
 598
 599         serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 600         if (!serial) {
 601                 dev_err(&dev->dev, "%s - out of memory\n", __func__);
 602                 return NULL;
 603         }
 604         serial->dev = usb_get_dev(dev);
 605         serial->type = driver;
 606         serial->interface = interface;
 607         kref_init(&serial->kref);
 608         mutex_init(&serial->disc_mutex);
 609         serial->minor = SERIAL_TTY_NO_MINOR;
 610
 611         return serial;
 612 }
 613
 614 static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
 615                                             struct usb_serial_driver *drv)
 616 {
 617         struct usb_dynid *dynid;
 618
 619         spin_lock(&drv->dynids.lock);
 620         list_for_each_entry(dynid, &drv->dynids.list, node) {
 621                 if (usb_match_one_id(intf, &dynid->id)) {
 622                         spin_unlock(&drv->dynids.lock);
 623                         return &dynid->id;
 624                 }
 625         }
 626         spin_unlock(&drv->dynids.lock);
 627         return NULL;
 628 }
 629
 630 static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
 631                                                 struct usb_interface *intf)
 632 {
 633         const struct usb_device_id *id;
 634
 635         id = usb_match_id(intf, drv->id_table);
 636         if (id) {
 637                 dbg("static descriptor matches");
 638                 goto exit;
 639         }
 640         id = match_dynamic_id(intf, drv);
 641         if (id)
 642                 dbg("dynamic descriptor matches");
 643 exit:
 644         return id;
 645 }
 646
 647 static struct usb_serial_driver *search_serial_device(
 648                                         struct usb_interface *iface)
 649 {
 650         const struct usb_device_id *id;
 651         struct usb_serial_driver *drv;
 652
 653         /* Check if the usb id matches a known device */
 654         list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
 655                 id = get_iface_id(drv, iface);
 656                 if (id)
 657                         return drv;
 658         }
 659
 660         return NULL;
 661 }
 662
 663 static int serial_carrier_raised(struct tty_port *port)
 664 {
 665         struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 666         struct usb_serial_driver *drv = p->serial->type;
 667         if (drv->carrier_raised)
 668                 return drv->carrier_raised(p);
 669         /* No carrier control - don't block */
 670         return 1;
 671 }
 672
 673 static void serial_dtr_rts(struct tty_port *port, int on)
 674 {
 675         struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 676         struct usb_serial_driver *drv = p->serial->type;
 677         if (drv->dtr_rts)
 678                 drv->dtr_rts(p, on);
 679 }
 680
 681 static const struct tty_port_operations serial_port_ops = {
 682         .carrier_raised = serial_carrier_raised,
 683         .dtr_rts = serial_dtr_rts,
 684         .activate = serial_activate,
 685         .shutdown = serial_down,
 686 };
 687
 688 int usb_serial_probe(struct usb_interface *interface,
 689                                const struct usb_device_id *id)
 690 {
 691         struct usb_device *dev = interface_to_usbdev(interface);
 692         struct usb_serial *serial = NULL;
 693         struct usb_serial_port *port;
 694         struct usb_host_interface *iface_desc;
 695         struct usb_endpoint_descriptor *endpoint;
 696         struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
 697         struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
 698         struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
 699         struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
 700         struct usb_serial_driver *type = NULL;
 701         int retval;
 702         unsigned int minor;
 703         int buffer_size;
 704         int i;
 705         int num_interrupt_in = 0;
 706         int num_interrupt_out = 0;
 707         int num_bulk_in = 0;
 708         int num_bulk_out = 0;
 709         int num_ports = 0;
 710         int max_endpoints;
 711
 712         lock_kernel(); /* guard against unloading a serial driver module */
 713         type = search_serial_device(interface);
 714         if (!type) {
 715                 unlock_kernel();
 716                 dbg("none matched");
 717                 return -ENODEV;
 718         }
 719
 720         serial = create_serial(dev, interface, type);
 721         if (!serial) {
 722                 unlock_kernel();
 723                 dev_err(&interface->dev, "%s - out of memory\n", __func__);
 724                 return -ENOMEM;
 725         }
 726
 727         /* if this device type has a probe function, call it */
 728         if (type->probe) {
 729                 const struct usb_device_id *id;
 730
 731                 if (!try_module_get(type->driver.owner)) {
 732                         unlock_kernel();
 733                         dev_err(&interface->dev,
 734                                 "module get failed, exiting\n");
 735                         kfree(serial);
 736                         return -EIO;
 737                 }
 738
 739                 id = get_iface_id(type, interface);
 740                 retval = type->probe(serial, id);
 741                 module_put(type->driver.owner);
 742
 743                 if (retval) {
 744                         unlock_kernel();
 745                         dbg("sub driver rejected device");
 746                         kfree(serial);
 747                         return retval;
 748                 }
 749         }
 750
 751         /* descriptor matches, let's find the endpoints needed */
 752         /* check out the endpoints */
 753         iface_desc = interface->cur_altsetting;
 754         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 755                 endpoint = &iface_desc->endpoint[i].desc;
 756
 757                 if (usb_endpoint_is_bulk_in(endpoint)) {
 758                         /* we found a bulk in endpoint */
 759                         dbg("found bulk in on endpoint %d", i);
 760                         bulk_in_endpoint[num_bulk_in] = endpoint;
 761                         ++num_bulk_in;
 762                 }
 763
 764                 if (usb_endpoint_is_bulk_out(endpoint)) {
 765                         /* we found a bulk out endpoint */
 766                         dbg("found bulk out on endpoint %d", i);
 767                         bulk_out_endpoint[num_bulk_out] = endpoint;
 768                         ++num_bulk_out;
 769                 }
 770
 771                 if (usb_endpoint_is_int_in(endpoint)) {
 772                         /* we found a interrupt in endpoint */
 773                         dbg("found interrupt in on endpoint %d", i);
 774                         interrupt_in_endpoint[num_interrupt_in] = endpoint;
 775                         ++num_interrupt_in;
 776                 }
 777
 778                 if (usb_endpoint_is_int_out(endpoint)) {
 779                         /* we found an interrupt out endpoint */
 780                         dbg("found interrupt out on endpoint %d", i);
 781                         interrupt_out_endpoint[num_interrupt_out] = endpoint;
 782                         ++num_interrupt_out;
 783                 }
 784         }
 785
 786 #if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
 787         /* BEGIN HORRIBLE HACK FOR PL2303 */
 788         /* this is needed due to the looney way its endpoints are set up */
 789         if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
 790              (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
 791             ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
 792              (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
 793             ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
 794              (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
 795             ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
 796              (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
 797                 if (interface != dev->actconfig->interface[0]) {
 798                         /* check out the endpoints of the other interface*/
 799                         iface_desc = dev->actconfig->interface[0]->cur_altsetting;
 800                         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 801                                 endpoint = &iface_desc->endpoint[i].desc;
 802                                 if (usb_endpoint_is_int_in(endpoint)) {
 803                                         /* we found a interrupt in endpoint */
 804                                         dbg("found interrupt in for Prolific device on separate interface");
 805                                         interrupt_in_endpoint[num_interrupt_in] = endpoint;
 806                                         ++num_interrupt_in;
 807                                 }
 808                         }
 809                 }
 810
 811                 /* Now make sure the PL-2303 is configured correctly.
 812                  * If not, give up now and hope this hack will work
 813                  * properly during a later invocation of usb_serial_probe
 814                  */
 815                 if (num_bulk_in == 0 || num_bulk_out == 0) {
 816                         unlock_kernel();
 817                         dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
 818                         kfree(serial);
 819                         return -ENODEV;
 820                 }
 821         }
 822         /* END HORRIBLE HACK FOR PL2303 */
 823 #endif
 824
 825 #ifdef CONFIG_USB_SERIAL_GENERIC
 826         if (type == &usb_serial_generic_device) {
 827                 num_ports = num_bulk_out;
 828                 if (num_ports == 0) {
 829                         unlock_kernel();
 830                         dev_err(&interface->dev,
 831                             "Generic device with no bulk out, not allowed.\n");
 832                         kfree(serial);
 833                         return -EIO;
 834                 }
 835         }
 836 #endif
 837         if (!num_ports) {
 838                 /* if this device type has a calc_num_ports function, call it */
 839                 if (type->calc_num_ports) {
 840                         if (!try_module_get(type->driver.owner)) {
 841                                 unlock_kernel();
 842                                 dev_err(&interface->dev,
 843                                         "module get failed, exiting\n");
 844                                 kfree(serial);
 845                                 return -EIO;
 846                         }
 847                         num_ports = type->calc_num_ports(serial);
 848                         module_put(type->driver.owner);
 849                 }
 850                 if (!num_ports)
 851                         num_ports = type->num_ports;
 852         }
 853
 854         serial->num_ports = num_ports;
 855         serial->num_bulk_in = num_bulk_in;
 856         serial->num_bulk_out = num_bulk_out;
 857         serial->num_interrupt_in = num_interrupt_in;
 858         serial->num_interrupt_out = num_interrupt_out;
 859
 860         /* found all that we need */
 861         dev_info(&interface->dev, "%s converter detected\n",
 862                         type->description);
 863
 864         /* create our ports, we need as many as the max endpoints */
 865         /* we don't use num_ports here because some devices have more
 866            endpoint pairs than ports */
 867         max_endpoints = max(num_bulk_in, num_bulk_out);
 868         max_endpoints = max(max_endpoints, num_interrupt_in);
 869         max_endpoints = max(max_endpoints, num_interrupt_out);
 870         max_endpoints = max(max_endpoints, (int)serial->num_ports);
 871         serial->num_port_pointers = max_endpoints;
 872         unlock_kernel();
 873
 874         dbg("%s - setting up %d port structures for this device",
 875                                                 __func__, max_endpoints);
 876         for (i = 0; i < max_endpoints; ++i) {
 877                 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 878                 if (!port)
 879                         goto probe_error;
 880                 tty_port_init(&port->port);
 881                 port->port.ops = &serial_port_ops;
 882                 port->serial = serial;
 883                 spin_lock_init(&port->lock);
 884                 /* Keep this for private driver use for the moment but
 885                    should probably go away */
 886                 INIT_WORK(&port->work, usb_serial_port_work);
 887                 serial->port[i] = port;
 888                 port->dev.parent = &interface->dev;
 889                 port->dev.driver = NULL;
 890                 port->dev.bus = &usb_serial_bus_type;
 891                 port->dev.release = &port_release;
 892                 device_initialize(&port->dev);
 893         }
 894
 895         /* set up the endpoint information */
 896         for (i = 0; i < num_bulk_in; ++i) {
 897                 endpoint = bulk_in_endpoint[i];
 898                 port = serial->port[i];
 899                 port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 900                 if (!port->read_urb) {
 901                         dev_err(&interface->dev, "No free urbs available\n");
 902                         goto probe_error;
 903                 }
 904                 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 905                 port->bulk_in_size = buffer_size;
 906                 port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 907                 port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
 908                 if (!port->bulk_in_buffer) {
 909                         dev_err(&interface->dev,
 910                                         "Couldn't allocate bulk_in_buffer\n");
 911                         goto probe_error;
 912                 }
 913                 usb_fill_bulk_urb(port->read_urb, dev,
 914                                 usb_rcvbulkpipe(dev,
 915                                                 endpoint->bEndpointAddress),
 916                                 port->bulk_in_buffer, buffer_size,
 917                                 serial->type->read_bulk_callback, port);
 918         }
 919
 920         for (i = 0; i < num_bulk_out; ++i) {
 921                 endpoint = bulk_out_endpoint[i];
 922                 port = serial->port[i];
 923                 port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 924                 if (!port->write_urb) {
 925                         dev_err(&interface->dev, "No free urbs available\n");
 926                         goto probe_error;
 927                 }
 928                 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 929                         goto probe_error;
 930                 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 931                 port->bulk_out_size = buffer_size;
 932                 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 933                 port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
 934                 if (!port->bulk_out_buffer) {
 935                         dev_err(&interface->dev,
 936                                         "Couldn't allocate bulk_out_buffer\n");
 937                         goto probe_error;
 938                 }
 939                 usb_fill_bulk_urb(port->write_urb, dev,
 940                                 usb_sndbulkpipe(dev,
 941                                         endpoint->bEndpointAddress),
 942                                 port->bulk_out_buffer, buffer_size,
 943                                 serial->type->write_bulk_callback, port);
 944         }
 945
 946         if (serial->type->read_int_callback) {
 947                 for (i = 0; i < num_interrupt_in; ++i) {
 948                         endpoint = interrupt_in_endpoint[i];
 949                         port = serial->port[i];
 950                         port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 951                         if (!port->interrupt_in_urb) {
 952                                 dev_err(&interface->dev,
 953                                                 "No free urbs available\n");
 954                                 goto probe_error;
 955                         }
 956                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 957                         port->interrupt_in_endpointAddress =
 958                                                 endpoint->bEndpointAddress;
 959                         port->interrupt_in_buffer = kmalloc(buffer_size,
 960                                                                 GFP_KERNEL);
 961                         if (!port->interrupt_in_buffer) {
 962                                 dev_err(&interface->dev,
 963                                     "Couldn't allocate interrupt_in_buffer\n");
 964                                 goto probe_error;
 965                         }
 966                         usb_fill_int_urb(port->interrupt_in_urb, dev,
 967                                 usb_rcvintpipe(dev,
 968                                                 endpoint->bEndpointAddress),
 969                                 port->interrupt_in_buffer, buffer_size,
 970                                 serial->type->read_int_callback, port,
 971                                 endpoint->bInterval);
 972                 }
 973         } else if (num_interrupt_in) {
 974                 dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined");
 975         }
 976
 977         if (serial->type->write_int_callback) {
 978                 for (i = 0; i < num_interrupt_out; ++i) {
 979                         endpoint = interrupt_out_endpoint[i];
 980                         port = serial->port[i];
 981                         port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 982                         if (!port->interrupt_out_urb) {
 983                                 dev_err(&interface->dev,
 984                                                 "No free urbs available\n");
 985                                 goto probe_error;
 986                         }
 987                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 988                         port->interrupt_out_size = buffer_size;
 989                         port->interrupt_out_endpointAddress =
 990                                                 endpoint->bEndpointAddress;
 991                         port->interrupt_out_buffer = kmalloc(buffer_size,
 992                                                                 GFP_KERNEL);
 993                         if (!port->interrupt_out_buffer) {
 994                                 dev_err(&interface->dev,
 995                                   "Couldn't allocate interrupt_out_buffer\n");
 996                                 goto probe_error;
 997                         }
 998                         usb_fill_int_urb(port->interrupt_out_urb, dev,
 999                                 usb_sndintpipe(dev,
1000                                                   endpoint->bEndpointAddress),
1001                                 port->interrupt_out_buffer, buffer_size,
1002                                 serial->type->write_int_callback, port,
1003                                 endpoint->bInterval);
1004                 }
1005         } else if (num_interrupt_out) {
1006                 dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
1007         }
1008
1009         /* if this device type has an attach function, call it */
1010         if (type->attach) {
1011                 if (!try_module_get(type->driver.owner)) {
1012                         dev_err(&interface->dev,
1013                                         "module get failed, exiting\n");
1014                         goto probe_error;
1015                 }
1016                 retval = type->attach(serial);
1017                 module_put(type->driver.owner);
1018                 if (retval < 0)
1019                         goto probe_error;
1020                 serial->attached = 1;
1021                 if (retval > 0) {
1022                         /* quietly accept this device, but don't bind to a
1023                            serial port as it's about to disappear */
1024                         serial->num_ports = 0;
1025                         goto exit;
1026                 }
1027         } else {
1028                 serial->attached = 1;
1029         }
1030
1031         if (get_free_serial(serial, num_ports, &minor) == NULL) {
1032                 dev_err(&interface->dev, "No more free serial devices\n");
1033                 goto probe_error;
1034         }
1035         serial->minor = minor;
1036
1037         /* register all of the individual ports with the driver core */
1038         for (i = 0; i < num_ports; ++i) {
1039                 port = serial->port[i];
1040                 dev_set_name(&port->dev, "ttyUSB%d", port->number);
1041                 dbg ("%s - registering %s", __func__, dev_name(&port->dev));
1042                 port->dev_state = PORT_REGISTERING;
1043                 retval = device_add(&port->dev);
1044                 if (retval) {
1045                         dev_err(&port->dev, "Error registering port device, "
1046                                 "continuing\n");
1047                         port->dev_state = PORT_UNREGISTERED;
1048                 } else {
1049                         port->dev_state = PORT_REGISTERED;
1050                 }
1051         }
1052
1053         usb_serial_console_init(debug, minor);
1054
1055 exit:
1056         /* success */
1057         usb_set_intfdata(interface, serial);
1058         return 0;
1059
1060 probe_error:
1061         usb_serial_put(serial);
1062         return -EIO;
1063 }
1064 EXPORT_SYMBOL_GPL(usb_serial_probe);
1065
1066 void usb_serial_disconnect(struct usb_interface *interface)
1067 {
1068         int i;
1069         struct usb_serial *serial = usb_get_intfdata(interface);
1070         struct device *dev = &interface->dev;
1071         struct usb_serial_port *port;
1072
1073         usb_serial_console_disconnect(serial);
1074         dbg("%s", __func__);
1075
1076         mutex_lock(&serial->disc_mutex);
1077         usb_set_intfdata(interface, NULL);
1078         /* must set a flag, to signal subdrivers */
1079         serial->disconnected = 1;
1080         mutex_unlock(&serial->disc_mutex);
1081
1082         for (i = 0; i < serial->num_ports; ++i) {
1083                 port = serial->port[i];
1084                 if (port) {
1085                         struct tty_struct *tty = tty_port_tty_get(&port->port);
1086                         if (tty) {
1087                                 tty_vhangup(tty);
1088                                 tty_kref_put(tty);
1089                         }
1090                         kill_traffic(port);
1091                         cancel_work_sync(&port->work);
1092                         if (port->dev_state == PORT_REGISTERED) {
1093
1094                                 /* Make sure the port is bound so that the
1095                                  * driver's port_remove method is called.
1096                                  */
1097                                 if (!port->dev.driver) {
1098                                         int rc;
1099
1100                                         port->dev.driver =
1101                                                         &serial->type->driver;
1102                                         rc = device_bind_driver(&port->dev);
1103                                 }
1104                                 port->dev_state = PORT_UNREGISTERING;
1105                                 device_del(&port->dev);
1106                                 port->dev_state = PORT_UNREGISTERED;
1107                         }
1108                 }
1109         }
1110         serial->type->disconnect(serial);
1111
1112         /* let the last holder of this object cause it to be cleaned up */
1113         usb_serial_put(serial);
1114         dev_info(dev, "device disconnected\n");
1115 }
1116 EXPORT_SYMBOL_GPL(usb_serial_disconnect);
1117
1118 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1119 {
1120         struct usb_serial *serial = usb_get_intfdata(intf);
1121         struct usb_serial_port *port;
1122         int i, r = 0;
1123
1124         serial->suspending = 1;
1125
1126         if (serial->type->suspend) {
1127                 r = serial->type->suspend(serial, message);
1128                 if (r < 0) {
1129                         serial->suspending = 0;
1130                         goto err_out;
1131                 }
1132         }
1133
1134         for (i = 0; i < serial->num_ports; ++i) {
1135                 port = serial->port[i];
1136                 if (port)
1137                         kill_traffic(port);
1138         }
1139
1140 err_out:
1141         return r;
1142 }
1143 EXPORT_SYMBOL(usb_serial_suspend);
1144
1145 int usb_serial_resume(struct usb_interface *intf)
1146 {
1147         struct usb_serial *serial = usb_get_intfdata(intf);
1148         int rv;
1149
1150         serial->suspending = 0;
1151         if (serial->type->resume)
1152                 rv = serial->type->resume(serial);
1153         else
1154                 rv = usb_serial_generic_resume(serial);
1155
1156         return rv;
1157 }
1158 EXPORT_SYMBOL(usb_serial_resume);
1159
1160 static const struct tty_operations serial_ops = {
1161         .open =                 serial_open,
1162         .close =                serial_close,
1163         .write =                serial_write,
1164         .hangup =               serial_hangup,
1165         .write_room =           serial_write_room,
1166         .ioctl =                serial_ioctl,
1167         .set_termios =          serial_set_termios,
1168         .throttle =             serial_throttle,
1169         .unthrottle =           serial_unthrottle,
1170         .break_ctl =            serial_break,
1171         .chars_in_buffer =      serial_chars_in_buffer,
1172         .tiocmget =             serial_tiocmget,
1173         .tiocmset =             serial_tiocmset,
1174         .cleanup =              serial_cleanup,
1175         .install =              serial_install,
1176         .proc_fops =            &serial_proc_fops,
1177 };
1178
1179
1180 struct tty_driver *usb_serial_tty_driver;
1181
1182 static int __init usb_serial_init(void)
1183 {
1184         int i;
1185         int result;
1186
1187         usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS);
1188         if (!usb_serial_tty_driver)
1189                 return -ENOMEM;
1190
1191         /* Initialize our global data */
1192         for (i = 0; i < SERIAL_TTY_MINORS; ++i)
1193                 serial_table[i] = NULL;
1194
1195         result = bus_register(&usb_serial_bus_type);
1196         if (result) {
1197                 printk(KERN_ERR "usb-serial: %s - registering bus driver "
1198                        "failed\n", __func__);
1199                 goto exit_bus;
1200         }
1201
1202         usb_serial_tty_driver->owner = THIS_MODULE;
1203         usb_serial_tty_driver->driver_name = "usbserial";
1204         usb_serial_tty_driver->name =   "ttyUSB";
1205         usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
1206         usb_serial_tty_driver->minor_start = 0;
1207         usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1208         usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1209         usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1210                                                 TTY_DRIVER_DYNAMIC_DEV;
1211         usb_serial_tty_driver->init_termios = tty_std_termios;
1212         usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1213                                                         | HUPCL | CLOCAL;
1214         usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1215         usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1216         tty_set_operations(usb_serial_tty_driver, &serial_ops);
1217         result = tty_register_driver(usb_serial_tty_driver);
1218         if (result) {
1219                 printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
1220                        __func__);
1221                 goto exit_reg_driver;
1222         }
1223
1224         /* register the USB driver */
1225         result = usb_register(&usb_serial_driver);
1226         if (result < 0) {
1227                 printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
1228                        __func__);
1229                 goto exit_tty;
1230         }
1231
1232         /* register the generic driver, if we should */
1233         result = usb_serial_generic_register(debug);
1234         if (result < 0) {
1235                 printk(KERN_ERR "usb-serial: %s - registering generic "
1236                        "driver failed\n", __func__);
1237                 goto exit_generic;
1238         }
1239
1240         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
1241
1242         return result;
1243
1244 exit_generic:
1245         usb_deregister(&usb_serial_driver);
1246
1247 exit_tty:
1248         tty_unregister_driver(usb_serial_tty_driver);
1249
1250 exit_reg_driver:
1251         bus_unregister(&usb_serial_bus_type);
1252
1253 exit_bus:
1254         printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
1255                __func__, result);
1256         put_tty_driver(usb_serial_tty_driver);
1257         return result;
1258 }
1259
1260
1261 static void __exit usb_serial_exit(void)
1262 {
1263         usb_serial_console_exit();
1264
1265         usb_serial_generic_deregister();
1266
1267         usb_deregister(&usb_serial_driver);
1268         tty_unregister_driver(usb_serial_tty_driver);
1269         put_tty_driver(usb_serial_tty_driver);
1270         bus_unregister(&usb_serial_bus_type);
1271 }
1272
1273
1274 module_init(usb_serial_init);
1275 module_exit(usb_serial_exit);
1276
1277 #define set_to_generic_if_null(type, function)                          \
1278         do {                                                            \
1279                 if (!type->function) {                                  \
1280                         type->function = usb_serial_generic_##function; \
1281                         dbg("Had to override the " #function            \
1282                                 " usb serial operation with the generic one.");\
1283                         }                                               \
1284         } while (0)
1285
1286 static void fixup_generic(struct usb_serial_driver *device)
1287 {
1288         set_to_generic_if_null(device, open);
1289         set_to_generic_if_null(device, write);
1290         set_to_generic_if_null(device, close);
1291         set_to_generic_if_null(device, write_room);
1292         set_to_generic_if_null(device, chars_in_buffer);
1293         set_to_generic_if_null(device, read_bulk_callback);
1294         set_to_generic_if_null(device, write_bulk_callback);
1295         set_to_generic_if_null(device, disconnect);
1296         set_to_generic_if_null(device, release);
1297 }
1298
1299 int usb_serial_register(struct usb_serial_driver *driver)
1300 {
1301         /* must be called with BKL held */
1302         int retval;
1303
1304         if (usb_disabled())
1305                 return -ENODEV;
1306
1307         fixup_generic(driver);
1308
1309         if (!driver->description)
1310                 driver->description = driver->driver.name;
1311
1312         /* Add this device to our list of devices */
1313         list_add(&driver->driver_list, &usb_serial_driver_list);
1314
1315         retval = usb_serial_bus_register(driver);
1316         if (retval) {
1317                 printk(KERN_ERR "usb-serial: problem %d when registering "
1318                        "driver %s\n", retval, driver->description);
1319                 list_del(&driver->driver_list);
1320         } else
1321                 printk(KERN_INFO "USB Serial support registered for %s\n",
1322                                                 driver->description);
1323
1324         return retval;
1325 }
1326 EXPORT_SYMBOL_GPL(usb_serial_register);
1327
1328
1329 void usb_serial_deregister(struct usb_serial_driver *device)
1330 {
1331         /* must be called with BKL held */
1332         printk(KERN_INFO "USB Serial deregistering driver %s\n",
1333                device->description);
1334         list_del(&device->driver_list);
1335         usb_serial_bus_deregister(device);
1336 }
1337 EXPORT_SYMBOL_GPL(usb_serial_deregister);
1338
1339 /* Module information */
1340 MODULE_AUTHOR(DRIVER_AUTHOR);
1341 MODULE_DESCRIPTION(DRIVER_DESC);
1342 MODULE_LICENSE("GPL");
1343
1344 module_param(debug, bool, S_IRUGO | S_IWUSR);
1345 MODULE_PARM_DESC(debug, "Debug enabled or not");