SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/usb/serial/kl5kusb105.c

   1 /*
   2  * KLSI KL5KUSB105 chip RS232 converter driver
   3  *
   4  *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
   5  *
   6  *   This program is free software; you can redistribute it and/or modify
   7  *   it under the terms of the GNU General Public License as published by
   8  *   the Free Software Foundation; either version 2 of the License, or
   9  *   (at your option) any later version.
  10  *
  11  * All information about the device was acquired using SniffUSB ans snoopUSB
  12  * on Windows98.
  13  * It was written out of frustration with the PalmConnect USB Serial adapter
  14  * sold by Palm Inc.
  15  * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
  16  * information that was not already available.
  17  *
  18  * It seems that KLSI bought some silicon-design information from ScanLogic,
  19  * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
  20  * KLSI has firmware available for their devices; it is probable that the
  21  * firmware differs from that used by KLSI in their products. If you have an
  22  * original KLSI device and can provide some information on it, I would be
  23  * most interested in adding support for it here. If you have any information
  24  * on the protocol used (or find errors in my reverse-engineered stuff), please
  25  * let me know.
  26  *
  27  * The code was only tested with a PalmConnect USB adapter; if you
  28  * are adventurous, try it with any KLSI-based device and let me know how it
  29  * breaks so that I can fix it!
  30  */
  31
  32 /* TODO:
  33  *      check modem line signals
  34  *      implement handshaking or decide that we do not support it
  35  */
  36
  37 /* History:
  38  *   0.3a - implemented pools of write URBs
  39  *   0.3  - alpha version for public testing
  40  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
  41  *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
  42  *
  43  *   The driver skeleton is mainly based on mct_u232.c and various other
  44  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
  45  */
  46
  47
  48 #include <linux/kernel.h>
  49 #include <linux/errno.h>
  50 #include <linux/init.h>
  51 #include <linux/slab.h>
  52 #include <linux/tty.h>
  53 #include <linux/tty_driver.h>
  54 #include <linux/tty_flip.h>
  55 #include <linux/module.h>
  56 #include <linux/uaccess.h>
  57 #include <asm/unaligned.h>
  58 #include <linux/usb.h>
  59 #include <linux/usb/serial.h>
  60 #include "kl5kusb105.h"
  61
  62 static int debug;
  63
  64 /*
  65  * Version Information
  66  */
  67 #define DRIVER_VERSION "v0.3a"
  68 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>"
  69 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
  70
  71
  72 /*
  73  * Function prototypes
  74  */
  75 static int  klsi_105_startup(struct usb_serial *serial);
  76 static void klsi_105_shutdown(struct usb_serial *serial);
  77 static int  klsi_105_open(struct tty_struct *tty,
  78                         struct usb_serial_port *port, struct file *filp);
  79 static void klsi_105_close(struct usb_serial_port *port);
  80 static int  klsi_105_write(struct tty_struct *tty,
  81         struct usb_serial_port *port, const unsigned char *buf, int count);
  82 static void klsi_105_write_bulk_callback(struct urb *urb);
  83 static int  klsi_105_chars_in_buffer(struct tty_struct *tty);
  84 static int  klsi_105_write_room(struct tty_struct *tty);
  85 static void klsi_105_read_bulk_callback(struct urb *urb);
  86 static void klsi_105_set_termios(struct tty_struct *tty,
  87                         struct usb_serial_port *port, struct ktermios *old);
  88 static void klsi_105_throttle(struct tty_struct *tty);
  89 static void klsi_105_unthrottle(struct tty_struct *tty);
  90 static int  klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
  91 static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
  92                         unsigned int set, unsigned int clear);
  93
  94 /*
  95  * All of the device info needed for the KLSI converters.
  96  */
  97 static struct usb_device_id id_table [] = {
  98         { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
  99         { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
 100         { }             /* Terminating entry */
 101 };
 102
 103 MODULE_DEVICE_TABLE(usb, id_table);
 104
 105 static struct usb_driver kl5kusb105d_driver = {
 106         .name =         "kl5kusb105d",
 107         .probe =        usb_serial_probe,
 108         .disconnect =   usb_serial_disconnect,
 109         .id_table =     id_table,
 110         .no_dynamic_id =        1,
 111 };
 112
 113 static struct usb_serial_driver kl5kusb105d_device = {
 114         .driver = {
 115                 .owner =        THIS_MODULE,
 116                 .name =         "kl5kusb105d",
 117         },
 118         .description =       "KL5KUSB105D / PalmConnect",
 119         .usb_driver =        &kl5kusb105d_driver,
 120         .id_table =          id_table,
 121         .num_ports =         1,
 122         .open =              klsi_105_open,
 123         .close =             klsi_105_close,
 124         .write =             klsi_105_write,
 125         .write_bulk_callback = klsi_105_write_bulk_callback,
 126         .chars_in_buffer =   klsi_105_chars_in_buffer,
 127         .write_room =        klsi_105_write_room,
 128         .read_bulk_callback = klsi_105_read_bulk_callback,
 129         .set_termios =       klsi_105_set_termios,
 130         /*.break_ctl =       klsi_105_break_ctl,*/
 131         .tiocmget =          klsi_105_tiocmget,
 132         .tiocmset =          klsi_105_tiocmset,
 133         .attach =            klsi_105_startup,
 134         .shutdown =          klsi_105_shutdown,
 135         .throttle =          klsi_105_throttle,
 136         .unthrottle =        klsi_105_unthrottle,
 137 };
 138
 139 struct klsi_105_port_settings {
 140         __u8    pktlen;         /* always 5, it seems */
 141         __u8    baudrate;
 142         __u8    databits;
 143         __u8    unknown1;
 144         __u8    unknown2;
 145 } __attribute__ ((packed));
 146
 147 /* we implement a pool of NUM_URBS urbs per usb_serial */
 148 #define NUM_URBS                        1
 149 #define URB_TRANSFER_BUFFER_SIZE        64
 150 struct klsi_105_private {
 151         struct klsi_105_port_settings   cfg;
 152         struct ktermios                 termios;
 153         unsigned long                   line_state; /* modem line settings */
 154         /* write pool */
 155         struct urb                      *write_urb_pool[NUM_URBS];
 156         spinlock_t                      lock;
 157         unsigned long                   bytes_in;
 158         unsigned long                   bytes_out;
 159 };
 160
 161
 162 /*
 163  * Handle vendor specific USB requests
 164  */
 165
 166
 167 #define KLSI_TIMEOUT     5000 /* default urb timeout */
 168
 169 static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 170                                       struct klsi_105_port_settings *settings)
 171 {
 172         int rc;
 173
 174         rc = usb_control_msg(port->serial->dev,
 175                         usb_sndctrlpipe(port->serial->dev, 0),
 176                         KL5KUSB105A_SIO_SET_DATA,
 177                         USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
 178                         0, /* value */
 179                         0, /* index */
 180                         settings,
 181                         sizeof(struct klsi_105_port_settings),
 182                         KLSI_TIMEOUT);
 183         if (rc < 0)
 184                 dev_err(&port->dev,
 185                         "Change port settings failed (error = %d)\n", rc);
 186         dev_info(&port->serial->dev->dev,
 187                  "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
 188                  settings->pktlen, settings->baudrate, settings->databits,
 189                  settings->unknown1, settings->unknown2);
 190         return rc;
 191 } /* klsi_105_chg_port_settings */
 192
 193 /* translate a 16-bit status value from the device to linux's TIO bits */
 194 static unsigned long klsi_105_status2linestate(const __u16 status)
 195 {
 196         unsigned long res = 0;
 197
 198         res =   ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
 199               | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
 200               ;
 201
 202         return res;
 203 }
 204 /*
 205  * Read line control via vendor command and return result through
 206  * *line_state_p
 207  */
 208 /* It seems that the status buffer has always only 2 bytes length */
 209 #define KLSI_STATUSBUF_LEN      2
 210 static int klsi_105_get_line_state(struct usb_serial_port *port,
 211                                    unsigned long *line_state_p)
 212 {
 213         int rc;
 214         __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
 215         __u16 status;
 216
 217         dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
 218         rc = usb_control_msg(port->serial->dev,
 219                              usb_rcvctrlpipe(port->serial->dev, 0),
 220                              KL5KUSB105A_SIO_POLL,
 221                              USB_TYPE_VENDOR | USB_DIR_IN,
 222                              0, /* value */
 223                              0, /* index */
 224                              status_buf, KLSI_STATUSBUF_LEN,
 225                              10000
 226                              );
 227         if (rc < 0)
 228                 dev_err(&port->dev, "Reading line status failed (error = %d)\n",
 229                         rc);
 230         else {
 231                 status = get_unaligned_le16(status_buf);
 232
 233                 dev_info(&port->serial->dev->dev, "read status %x %x",
 234                          status_buf[0], status_buf[1]);
 235
 236                 *line_state_p = klsi_105_status2linestate(status);
 237         }
 238         return rc;
 239 }
 240
 241
 242 /*
 243  * Driver's tty interface functions
 244  */
 245
 246 static int klsi_105_startup(struct usb_serial *serial)
 247 {
 248         struct klsi_105_private *priv;
 249         int i, j;
 250
 251         /* check if we support the product id (see keyspan.c)
 252          * FIXME
 253          */
 254
 255         /* allocate the private data structure */
 256         for (i = 0; i < serial->num_ports; i++) {
 257                 priv = kmalloc(sizeof(struct klsi_105_private),
 258                                                    GFP_KERNEL);
 259                 if (!priv) {
 260                         dbg("%skmalloc for klsi_105_private failed.", __func__);
 261                         i--;
 262                         goto err_cleanup;
 263                 }
 264                 /* set initial values for control structures */
 265                 priv->cfg.pktlen    = 5;
 266                 priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
 267                 priv->cfg.databits  = kl5kusb105a_dtb_8;
 268                 priv->cfg.unknown1  = 0;
 269                 priv->cfg.unknown2  = 1;
 270
 271                 priv->line_state    = 0;
 272
 273                 priv->bytes_in      = 0;
 274                 priv->bytes_out     = 0;
 275                 usb_set_serial_port_data(serial->port[i], priv);
 276
 277                 spin_lock_init(&priv->lock);
 278                 for (j = 0; j < NUM_URBS; j++) {
 279                         struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
 280
 281                         priv->write_urb_pool[j] = urb;
 282                         if (urb == NULL) {
 283                                 dev_err(&serial->dev->dev, "No more urbs???\n");
 284                                 goto err_cleanup;
 285                         }
 286
 287                         urb->transfer_buffer =
 288                                 kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 289                         if (!urb->transfer_buffer) {
 290                                 dev_err(&serial->dev->dev,
 291                                         "%s - out of memory for urb buffers.\n",
 292                                         __func__);
 293                                 goto err_cleanup;
 294                         }
 295                 }
 296
 297                 /* priv->termios is left uninitalized until port opening */
 298                 init_waitqueue_head(&serial->port[i]->write_wait);
 299         }
 300
 301         return 0;
 302
 303 err_cleanup:
 304         for (; i >= 0; i--) {
 305                 priv = usb_get_serial_port_data(serial->port[i]);
 306                 for (j = 0; j < NUM_URBS; j++) {
 307                         if (priv->write_urb_pool[j]) {
 308                                 kfree(priv->write_urb_pool[j]->transfer_buffer);
 309                                 usb_free_urb(priv->write_urb_pool[j]);
 310                         }
 311                 }
 312                 usb_set_serial_port_data(serial->port[i], NULL);
 313         }
 314         return -ENOMEM;
 315 } /* klsi_105_startup */
 316
 317
 318 static void klsi_105_shutdown(struct usb_serial *serial)
 319 {
 320         int i;
 321
 322         dbg("%s", __func__);
 323
 324         /* stop reads and writes on all ports */
 325         for (i = 0; i < serial->num_ports; ++i) {
 326                 struct klsi_105_private *priv =
 327                                 usb_get_serial_port_data(serial->port[i]);
 328                 unsigned long flags;
 329
 330                 if (priv) {
 331                         /* kill our write urb pool */
 332                         int j;
 333                         struct urb **write_urbs = priv->write_urb_pool;
 334                         spin_lock_irqsave(&priv->lock, flags);
 335
 336                         for (j = 0; j < NUM_URBS; j++) {
 337                                 if (write_urbs[j]) {
 338                                         /* FIXME - uncomment the following
 339                                          * usb_kill_urb call when the host
 340                                          * controllers get fixed to set
 341                                          * urb->dev = NULL after the urb is
 342                                          * finished.  Otherwise this call
 343                                          * oopses. */
 344                                         /* usb_kill_urb(write_urbs[j]); */
 345                                         kfree(write_urbs[j]->transfer_buffer);
 346                                         usb_free_urb(write_urbs[j]);
 347                                 }
 348                         }
 349                         spin_unlock_irqrestore(&priv->lock, flags);
 350                         kfree(priv);
 351                         usb_set_serial_port_data(serial->port[i], NULL);
 352                 }
 353         }
 354 } /* klsi_105_shutdown */
 355
 356 static int  klsi_105_open(struct tty_struct *tty,
 357                         struct usb_serial_port *port, struct file *filp)
 358 {
 359         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 360         int retval = 0;
 361         int rc;
 362         int i;
 363         unsigned long line_state;
 364         struct klsi_105_port_settings cfg;
 365         unsigned long flags;
 366
 367         dbg("%s port %d", __func__, port->number);
 368
 369         /* force low_latency on so that our tty_push actually forces
 370          * the data through
 371          * tty->low_latency = 1; */
 372
 373         /* Do a defined restart:
 374          * Set up sane default baud rate and send the 'READ_ON'
 375          * vendor command.
 376          * FIXME: set modem line control (how?)
 377          * Then read the modem line control and store values in
 378          * priv->line_state.
 379          */
 380         cfg.pktlen   = 5;
 381         cfg.baudrate = kl5kusb105a_sio_b9600;
 382         cfg.databits = kl5kusb105a_dtb_8;
 383         cfg.unknown1 = 0;
 384         cfg.unknown2 = 1;
 385         klsi_105_chg_port_settings(port, &cfg);
 386
 387         /* set up termios structure */
 388         spin_lock_irqsave(&priv->lock, flags);
 389         priv->termios.c_iflag = tty->termios->c_iflag;
 390         priv->termios.c_oflag = tty->termios->c_oflag;
 391         priv->termios.c_cflag = tty->termios->c_cflag;
 392         priv->termios.c_lflag = tty->termios->c_lflag;
 393         for (i = 0; i < NCCS; i++)
 394                 priv->termios.c_cc[i] = tty->termios->c_cc[i];
 395         priv->cfg.pktlen   = cfg.pktlen;
 396         priv->cfg.baudrate = cfg.baudrate;
 397         priv->cfg.databits = cfg.databits;
 398         priv->cfg.unknown1 = cfg.unknown1;
 399         priv->cfg.unknown2 = cfg.unknown2;
 400         spin_unlock_irqrestore(&priv->lock, flags);
 401
 402         /* READ_ON and urb submission */
 403         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 404                       usb_rcvbulkpipe(port->serial->dev,
 405                                       port->bulk_in_endpointAddress),
 406                       port->read_urb->transfer_buffer,
 407                       port->read_urb->transfer_buffer_length,
 408                       klsi_105_read_bulk_callback,
 409                       port);
 410
 411         rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
 412         if (rc) {
 413                 dev_err(&port->dev, "%s - failed submitting read urb, "
 414                         "error %d\n", __func__, rc);
 415                 retval = rc;
 416                 goto exit;
 417         }
 418
 419         rc = usb_control_msg(port->serial->dev,
 420                              usb_sndctrlpipe(port->serial->dev, 0),
 421                              KL5KUSB105A_SIO_CONFIGURE,
 422                              USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
 423                              KL5KUSB105A_SIO_CONFIGURE_READ_ON,
 424                              0, /* index */
 425                              NULL,
 426                              0,
 427                              KLSI_TIMEOUT);
 428         if (rc < 0) {
 429                 dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
 430                 retval = rc;
 431         } else
 432                 dbg("%s - enabled reading", __func__);
 433
 434         rc = klsi_105_get_line_state(port, &line_state);
 435         if (rc >= 0) {
 436                 spin_lock_irqsave(&priv->lock, flags);
 437                 priv->line_state = line_state;
 438                 spin_unlock_irqrestore(&priv->lock, flags);
 439                 dbg("%s - read line state 0x%lx", __func__, line_state);
 440                 retval = 0;
 441         } else
 442                 retval = rc;
 443
 444 exit:
 445         return retval;
 446 } /* klsi_105_open */
 447
 448
 449 static void klsi_105_close(struct usb_serial_port *port)
 450 {
 451         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 452         int rc;
 453
 454         dbg("%s port %d", __func__, port->number);
 455
 456         mutex_lock(&port->serial->disc_mutex);
 457         if (!port->serial->disconnected) {
 458                 /* send READ_OFF */
 459                 rc = usb_control_msg(port->serial->dev,
 460                                      usb_sndctrlpipe(port->serial->dev, 0),
 461                                      KL5KUSB105A_SIO_CONFIGURE,
 462                                      USB_TYPE_VENDOR | USB_DIR_OUT,
 463                                      KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
 464                                      0, /* index */
 465                                      NULL, 0,
 466                                      KLSI_TIMEOUT);
 467                 if (rc < 0)
 468                         dev_err(&port->dev,
 469                                 "Disabling read failed (error = %d)\n", rc);
 470         }
 471         mutex_unlock(&port->serial->disc_mutex);
 472
 473         /* shutdown our bulk reads and writes */
 474         usb_kill_urb(port->write_urb);
 475         usb_kill_urb(port->read_urb);
 476         /* unlink our write pool */
 477         /* FIXME */
 478         /* wgg - do I need this? I think so. */
 479         usb_kill_urb(port->interrupt_in_urb);
 480         dev_info(&port->serial->dev->dev,
 481                  "port stats: %ld bytes in, %ld bytes out\n",
 482                  priv->bytes_in, priv->bytes_out);
 483 } /* klsi_105_close */
 484
 485
 486 /* We need to write a complete 64-byte data block and encode the
 487  * number actually sent in the first double-byte, LSB-order. That
 488  * leaves at most 62 bytes of payload.
 489  */
 490 #define KLSI_105_DATA_OFFSET    2   /* in the bulk urb data block */
 491
 492
 493 static int klsi_105_write(struct tty_struct *tty,
 494         struct usb_serial_port *port, const unsigned char *buf, int count)
 495 {
 496         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 497         int result, size;
 498         int bytes_sent = 0;
 499
 500         dbg("%s - port %d", __func__, port->number);
 501
 502         while (count > 0) {
 503                 /* try to find a free urb (write 0 bytes if none) */
 504                 struct urb *urb = NULL;
 505                 unsigned long flags;
 506                 int i;
 507                 /* since the pool is per-port we might not need
 508                    the spin lock !? */
 509                 spin_lock_irqsave(&priv->lock, flags);
 510                 for (i = 0; i < NUM_URBS; i++) {
 511                         if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
 512                                 urb = priv->write_urb_pool[i];
 513                                 dbg("%s - using pool URB %d", __func__, i);
 514                                 break;
 515                         }
 516                 }
 517                 spin_unlock_irqrestore(&priv->lock, flags);
 518
 519                 if (urb == NULL) {
 520                         dbg("%s - no more free urbs", __func__);
 521                         goto exit;
 522                 }
 523
 524                 if (urb->transfer_buffer == NULL) {
 525                         urb->transfer_buffer =
 526                                 kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
 527                         if (urb->transfer_buffer == NULL) {
 528                                 dev_err(&port->dev,
 529                                         "%s - no more kernel memory...\n",
 530                                         __func__);
 531                                 goto exit;
 532                         }
 533                 }
 534
 535                 size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
 536                 size = min(size, URB_TRANSFER_BUFFER_SIZE -
 537                                                         KLSI_105_DATA_OFFSET);
 538
 539                 memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
 540
 541                 /* write payload size into transfer buffer */
 542                 ((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
 543                 ((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8);
 544
 545                 /* set up our urb */
 546                 usb_fill_bulk_urb(urb, port->serial->dev,
 547                               usb_sndbulkpipe(port->serial->dev,
 548                                               port->bulk_out_endpointAddress),
 549                               urb->transfer_buffer,
 550                               URB_TRANSFER_BUFFER_SIZE,
 551                               klsi_105_write_bulk_callback,
 552                               port);
 553
 554                 /* send the data out the bulk port */
 555                 result = usb_submit_urb(urb, GFP_ATOMIC);
 556                 if (result) {
 557                         dev_err(&port->dev,
 558                                 "%s - failed submitting write urb, error %d\n",
 559                                 __func__, result);
 560                         goto exit;
 561                 }
 562                 buf += size;
 563                 bytes_sent += size;
 564                 count -= size;
 565         }
 566 exit:
 567         /* lockless, but it's for debug info only... */
 568         priv->bytes_out += bytes_sent;
 569
 570         return bytes_sent;      /* that's how much we wrote */
 571 } /* klsi_105_write */
 572
 573 static void klsi_105_write_bulk_callback(struct urb *urb)
 574 {
 575         struct usb_serial_port *port = urb->context;
 576         int status = urb->status;
 577
 578         dbg("%s - port %d", __func__, port->number);
 579
 580         if (status) {
 581                 dbg("%s - nonzero write bulk status received: %d", __func__,
 582                     status);
 583                 return;
 584         }
 585
 586         usb_serial_port_softint(port);
 587 } /* klsi_105_write_bulk_completion_callback */
 588
 589
 590 /* return number of characters currently in the writing process */
 591 static int klsi_105_chars_in_buffer(struct tty_struct *tty)
 592 {
 593         struct usb_serial_port *port = tty->driver_data;
 594         int chars = 0;
 595         int i;
 596         unsigned long flags;
 597         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 598
 599         spin_lock_irqsave(&priv->lock, flags);
 600
 601         for (i = 0; i < NUM_URBS; ++i) {
 602                 if (priv->write_urb_pool[i]->status == -EINPROGRESS)
 603                         chars += URB_TRANSFER_BUFFER_SIZE;
 604         }
 605
 606         spin_unlock_irqrestore(&priv->lock, flags);
 607
 608         dbg("%s - returns %d", __func__, chars);
 609         return chars;
 610 }
 611
 612 static int klsi_105_write_room(struct tty_struct *tty)
 613 {
 614         struct usb_serial_port *port = tty->driver_data;
 615         unsigned long flags;
 616         int i;
 617         int room = 0;
 618         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 619
 620         spin_lock_irqsave(&priv->lock, flags);
 621         for (i = 0; i < NUM_URBS; ++i) {
 622                 if (priv->write_urb_pool[i]->status != -EINPROGRESS)
 623                         room += URB_TRANSFER_BUFFER_SIZE;
 624         }
 625
 626         spin_unlock_irqrestore(&priv->lock, flags);
 627
 628         dbg("%s - returns %d", __func__, room);
 629         return room;
 630 }
 631
 632
 633
 634 static void klsi_105_read_bulk_callback(struct urb *urb)
 635 {
 636         struct usb_serial_port *port = urb->context;
 637         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 638         struct tty_struct *tty;
 639         unsigned char *data = urb->transfer_buffer;
 640         int rc;
 641         int status = urb->status;
 642
 643         dbg("%s - port %d", __func__, port->number);
 644
 645         /* The urb might have been killed. */
 646         if (status) {
 647                 dbg("%s - nonzero read bulk status received: %d", __func__,
 648                     status);
 649                 return;
 650         }
 651
 652         /* The data received is again preceded by a length double-byte in LSB-
 653          * first order (see klsi_105_write() )
 654          */
 655         if (urb->actual_length == 0) {
 656                 /* empty urbs seem to happen, we ignore them */
 657                 /* dbg("%s - emtpy URB", __func__); */
 658                ;
 659         } else if (urb->actual_length <= 2) {
 660                 dbg("%s - size %d URB not understood", __func__,
 661                     urb->actual_length);
 662                 usb_serial_debug_data(debug, &port->dev, __func__,
 663                                       urb->actual_length, data);
 664         } else {
 665                 int bytes_sent = ((__u8 *) data)[0] +
 666                                  ((unsigned int) ((__u8 *) data)[1] << 8);
 667                 tty = tty_port_tty_get(&port->port);
 668                 /* we should immediately resubmit the URB, before attempting
 669                  * to pass the data on to the tty layer. But that needs locking
 670                  * against re-entry an then mixed-up data because of
 671                  * intermixed tty_flip_buffer_push()s
 672                  * FIXME
 673                  */
 674                 usb_serial_debug_data(debug, &port->dev, __func__,
 675                                       urb->actual_length, data);
 676
 677                 if (bytes_sent + 2 > urb->actual_length) {
 678                         dbg("%s - trying to read more data than available"
 679                             " (%d vs. %d)", __func__,
 680                             bytes_sent+2, urb->actual_length);
 681                         /* cap at implied limit */
 682                         bytes_sent = urb->actual_length - 2;
 683                 }
 684
 685                 tty_buffer_request_room(tty, bytes_sent);
 686                 tty_insert_flip_string(tty, data + 2, bytes_sent);
 687                 tty_flip_buffer_push(tty);
 688                 tty_kref_put(tty);
 689
 690                 /* again lockless, but debug info only */
 691                 priv->bytes_in += bytes_sent;
 692         }
 693         /* Continue trying to always read  */
 694         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 695                       usb_rcvbulkpipe(port->serial->dev,
 696                                       port->bulk_in_endpointAddress),
 697                       port->read_urb->transfer_buffer,
 698                       port->read_urb->transfer_buffer_length,
 699                       klsi_105_read_bulk_callback,
 700                       port);
 701         rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 702         if (rc)
 703                 dev_err(&port->dev,
 704                         "%s - failed resubmitting read urb, error %d\n",
 705                         __func__, rc);
 706 } /* klsi_105_read_bulk_callback */
 707
 708
 709 static void klsi_105_set_termios(struct tty_struct *tty,
 710                                  struct usb_serial_port *port,
 711                                  struct ktermios *old_termios)
 712 {
 713         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 714         unsigned int iflag = tty->termios->c_iflag;
 715         unsigned int old_iflag = old_termios->c_iflag;
 716         unsigned int cflag = tty->termios->c_cflag;
 717         unsigned int old_cflag = old_termios->c_cflag;
 718         struct klsi_105_port_settings cfg;
 719         unsigned long flags;
 720         speed_t baud;
 721
 722         /* lock while we are modifying the settings */
 723         spin_lock_irqsave(&priv->lock, flags);
 724
 725         /*
 726          * Update baud rate
 727          */
 728         baud = tty_get_baud_rate(tty);
 729
 730         if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
 731                 /* reassert DTR and (maybe) RTS on transition from B0 */
 732                 if ((old_cflag & CBAUD) == B0) {
 733                         dbg("%s: baud was B0", __func__);
 734 #if 0
 735                         priv->control_state |= TIOCM_DTR;
 736                         /* don't set RTS if using hardware flow control */
 737                         if (!(old_cflag & CRTSCTS))
 738                                 priv->control_state |= TIOCM_RTS;
 739                         mct_u232_set_modem_ctrl(serial, priv->control_state);
 740 #endif
 741                 }
 742         }
 743         switch (baud) {
 744         case 0: /* handled below */
 745                 break;
 746         case 1200:
 747                 priv->cfg.baudrate = kl5kusb105a_sio_b1200;
 748                 break;
 749         case 2400:
 750                 priv->cfg.baudrate = kl5kusb105a_sio_b2400;
 751                 break;
 752         case 4800:
 753                 priv->cfg.baudrate = kl5kusb105a_sio_b4800;
 754                 break;
 755         case 9600:
 756                 priv->cfg.baudrate = kl5kusb105a_sio_b9600;
 757                 break;
 758         case 19200:
 759                 priv->cfg.baudrate = kl5kusb105a_sio_b19200;
 760                 break;
 761         case 38400:
 762                 priv->cfg.baudrate = kl5kusb105a_sio_b38400;
 763                 break;
 764         case 57600:
 765                 priv->cfg.baudrate = kl5kusb105a_sio_b57600;
 766                 break;
 767         case 115200:
 768                 priv->cfg.baudrate = kl5kusb105a_sio_b115200;
 769                 break;
 770         default:
 771                 dbg("KLSI USB->Serial converter:"
 772                     " unsupported baudrate request, using default of 9600");
 773                         priv->cfg.baudrate = kl5kusb105a_sio_b9600;
 774                 baud = 9600;
 775                 break;
 776         }
 777         if ((cflag & CBAUD) == B0) {
 778                 dbg("%s: baud is B0", __func__);
 779                 /* Drop RTS and DTR */
 780                 /* maybe this should be simulated by sending read
 781                  * disable and read enable messages?
 782                  */
 783                 ;
 784 #if 0
 785                 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 786                 mct_u232_set_modem_ctrl(serial, priv->control_state);
 787 #endif
 788         }
 789         tty_encode_baud_rate(tty, baud, baud);
 790
 791         if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
 792                 /* set the number of data bits */
 793                 switch (cflag & CSIZE) {
 794                 case CS5:
 795                         dbg("%s - 5 bits/byte not supported", __func__);
 796                         spin_unlock_irqrestore(&priv->lock, flags);
 797                         return ;
 798                 case CS6:
 799                         dbg("%s - 6 bits/byte not supported", __func__);
 800                         spin_unlock_irqrestore(&priv->lock, flags);
 801                         return ;
 802                 case CS7:
 803                         priv->cfg.databits = kl5kusb105a_dtb_7;
 804                         break;
 805                 case CS8:
 806                         priv->cfg.databits = kl5kusb105a_dtb_8;
 807                         break;
 808                 default:
 809                         dev_err(&port->dev,
 810                                 "CSIZE was not CS5-CS8, using default of 8\n");
 811                         priv->cfg.databits = kl5kusb105a_dtb_8;
 812                         break;
 813                 }
 814         }
 815
 816         /*
 817          * Update line control register (LCR)
 818          */
 819         if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
 820             || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 821                 /* Not currently supported */
 822                 tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
 823 #if 0
 824                 priv->last_lcr = 0;
 825
 826                 /* set the parity */
 827                 if (cflag & PARENB)
 828                         priv->last_lcr |= (cflag & PARODD) ?
 829                                 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
 830                 else
 831                         priv->last_lcr |= MCT_U232_PARITY_NONE;
 832
 833                 /* set the number of stop bits */
 834                 priv->last_lcr |= (cflag & CSTOPB) ?
 835                         MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
 836
 837                 mct_u232_set_line_ctrl(serial, priv->last_lcr);
 838 #endif
 839                 ;
 840         }
 841         /*
 842          * Set flow control: well, I do not really now how to handle DTR/RTS.
 843          * Just do what we have seen with SniffUSB on Win98.
 844          */
 845         if ((iflag & IXOFF) != (old_iflag & IXOFF)
 846             || (iflag & IXON) != (old_iflag & IXON)
 847             ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 848                 /* Not currently supported */
 849                 tty->termios->c_cflag &= ~CRTSCTS;
 850                 /* Drop DTR/RTS if no flow control otherwise assert */
 851 #if 0
 852                 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
 853                         priv->control_state |= TIOCM_DTR | TIOCM_RTS;
 854                 else
 855                         priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 856                 mct_u232_set_modem_ctrl(serial, priv->control_state);
 857 #endif
 858                 ;
 859         }
 860         memcpy(&cfg, &priv->cfg, sizeof(cfg));
 861         spin_unlock_irqrestore(&priv->lock, flags);
 862
 863         /* now commit changes to device */
 864         klsi_105_chg_port_settings(port, &cfg);
 865 } /* klsi_105_set_termios */
 866
 867
 868 #if 0
 869 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 870 {
 871         struct usb_serial_port *port = tty->driver_data;
 872         struct usb_serial *serial = port->serial;
 873         struct mct_u232_private *priv =
 874                                 (struct mct_u232_private *)port->private;
 875         unsigned char lcr = priv->last_lcr;
 876
 877         dbg("%sstate=%d", __func__, break_state);
 878
 879         /* LOCKING */
 880         if (break_state)
 881                 lcr |= MCT_U232_SET_BREAK;
 882
 883         mct_u232_set_line_ctrl(serial, lcr);
 884 } /* mct_u232_break_ctl */
 885 #endif
 886
 887 static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
 888 {
 889         struct usb_serial_port *port = tty->driver_data;
 890         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 891         unsigned long flags;
 892         int rc;
 893         unsigned long line_state;
 894         dbg("%s - request, just guessing", __func__);
 895
 896         rc = klsi_105_get_line_state(port, &line_state);
 897         if (rc < 0) {
 898                 dev_err(&port->dev,
 899                         "Reading line control failed (error = %d)\n", rc);
 900                 /* better return value? EAGAIN? */
 901                 return rc;
 902         }
 903
 904         spin_lock_irqsave(&priv->lock, flags);
 905         priv->line_state = line_state;
 906         spin_unlock_irqrestore(&priv->lock, flags);
 907         dbg("%s - read line state 0x%lx", __func__, line_state);
 908         return (int)line_state;
 909 }
 910
 911 static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 912                              unsigned int set, unsigned int clear)
 913 {
 914         int retval = -EINVAL;
 915
 916         dbg("%s", __func__);
 917
 918 /* if this ever gets implemented, it should be done something like this:
 919         struct usb_serial *serial = port->serial;
 920         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 921         unsigned long flags;
 922         int control;
 923
 924         spin_lock_irqsave (&priv->lock, flags);
 925         if (set & TIOCM_RTS)
 926                 priv->control_state |= TIOCM_RTS;
 927         if (set & TIOCM_DTR)
 928                 priv->control_state |= TIOCM_DTR;
 929         if (clear & TIOCM_RTS)
 930                 priv->control_state &= ~TIOCM_RTS;
 931         if (clear & TIOCM_DTR)
 932                 priv->control_state &= ~TIOCM_DTR;
 933         control = priv->control_state;
 934         spin_unlock_irqrestore (&priv->lock, flags);
 935         retval = mct_u232_set_modem_ctrl(serial, control);
 936 */
 937         return retval;
 938 }
 939
 940 static void klsi_105_throttle(struct tty_struct *tty)
 941 {
 942         struct usb_serial_port *port = tty->driver_data;
 943         dbg("%s - port %d", __func__, port->number);
 944         usb_kill_urb(port->read_urb);
 945 }
 946
 947 static void klsi_105_unthrottle(struct tty_struct *tty)
 948 {
 949         struct usb_serial_port *port = tty->driver_data;
 950         int result;
 951
 952         dbg("%s - port %d", __func__, port->number);
 953
 954         port->read_urb->dev = port->serial->dev;
 955         result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 956         if (result)
 957                 dev_err(&port->dev,
 958                         "%s - failed submitting read urb, error %d\n",
 959                         __func__, result);
 960 }
 961
 962
 963
 964 static int __init klsi_105_init(void)
 965 {
 966         int retval;
 967         retval = usb_serial_register(&kl5kusb105d_device);
 968         if (retval)
 969                 goto failed_usb_serial_register;
 970         retval = usb_register(&kl5kusb105d_driver);
 971         if (retval)
 972                 goto failed_usb_register;
 973
 974         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 975                DRIVER_DESC "\n");
 976         return 0;
 977 failed_usb_register:
 978         usb_serial_deregister(&kl5kusb105d_device);
 979 failed_usb_serial_register:
 980         return retval;
 981 }
 982
 983
 984 static void __exit klsi_105_exit(void)
 985 {
 986         usb_deregister(&kl5kusb105d_driver);
 987         usb_serial_deregister(&kl5kusb105d_device);
 988 }
 989
 990
 991 module_init(klsi_105_init);
 992 module_exit(klsi_105_exit);
 993
 994 MODULE_AUTHOR(DRIVER_AUTHOR);
 995 MODULE_DESCRIPTION(DRIVER_DESC);
 996 MODULE_LICENSE("GPL");
 997
 998
 999 module_param(debug, bool, S_IRUGO | S_IWUSR);
1000 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
1001
1002 /* vim: set sts=8 ts=8 sw=8: */