SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/tc/lk201.c

   1 /*
   2  *
   3  * This file is subject to the terms and conditions of the GNU General Public
   4  * License.  See the file "COPYING" in the main directory of this archive
   5  * for more details.
   6  *
   7  * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
   8  * Copyright (C) 2001, 2002, 2003, 2004  Maciej W. Rozycki
   9  */
  10
  11
  12 #include <linux/errno.h>
  13 #include <linux/tty.h>
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/kbd_ll.h>
  18 #include <linux/kbd_kern.h>
  19 #include <linux/vt_kern.h>
  20
  21 #include <asm/keyboard.h>
  22 #include <asm/dec/tc.h>
  23 #include <asm/dec/machtype.h>
  24 #include <asm/dec/serial.h>
  25
  26 #include "lk201.h"
  27
  28 /*
  29  * Only handle DECstations that have an LK201 interface.
  30  * Maxine uses LK501 at the Access.Bus and various DECsystems
  31  * have no keyboard interface at all.
  32  */
  33 #define LK_IFACE        (mips_machtype == MACH_DS23100    || \
  34                          mips_machtype == MACH_DS5000_200 || \
  35                          mips_machtype == MACH_DS5000_1XX || \
  36                          mips_machtype == MACH_DS5000_2X0)
  37 /*
  38  * These use the Z8530 SCC.  Others use the DZ11.
  39  */
  40 #define LK_IFACE_ZS     (mips_machtype == MACH_DS5000_1XX || \
  41                          mips_machtype == MACH_DS5000_2X0)
  42
  43 /* Simple translation table for the SysRq keys */
  44
  45 #ifdef CONFIG_MAGIC_SYSRQ
  46 /*
  47  * Actually no translation at all, at least until we figure out
  48  * how to define SysRq for LK201 and friends. --macro
  49  */
  50 unsigned char lk201_sysrq_xlate[128];
  51 unsigned char *kbd_sysrq_xlate = lk201_sysrq_xlate;
  52
  53 unsigned char kbd_sysrq_key = -1;
  54 #endif
  55
  56 #define KEYB_LINE       3
  57
  58 static int __init lk201_init(void *);
  59 static void __init lk201_info(void *);
  60 static void lk201_rx_char(unsigned char, unsigned char);
  61
  62 static struct dec_serial_hook lk201_hook = {
  63         .init_channel   = lk201_init,
  64         .init_info      = lk201_info,
  65         .rx_char        = NULL,
  66         .poll_rx_char   = NULL,
  67         .poll_tx_char   = NULL,
  68         .cflags         = B4800 | CS8 | CSTOPB | CLOCAL,
  69 };
  70
  71 /*
  72  * This is used during keyboard initialisation
  73  */
  74 static unsigned char lk201_reset_string[] = {
  75         LK_CMD_SET_DEFAULTS,
  76         LK_CMD_MODE(LK_MODE_RPT_DOWN, 1),
  77         LK_CMD_MODE(LK_MODE_RPT_DOWN, 2),
  78         LK_CMD_MODE(LK_MODE_RPT_DOWN, 3),
  79         LK_CMD_MODE(LK_MODE_RPT_DOWN, 4),
  80         LK_CMD_MODE(LK_MODE_DOWN_UP, 5),
  81         LK_CMD_MODE(LK_MODE_DOWN_UP, 6),
  82         LK_CMD_MODE(LK_MODE_RPT_DOWN, 7),
  83         LK_CMD_MODE(LK_MODE_RPT_DOWN, 8),
  84         LK_CMD_MODE(LK_MODE_RPT_DOWN, 9),
  85         LK_CMD_MODE(LK_MODE_RPT_DOWN, 10),
  86         LK_CMD_MODE(LK_MODE_RPT_DOWN, 11),
  87         LK_CMD_MODE(LK_MODE_RPT_DOWN, 12),
  88         LK_CMD_MODE(LK_MODE_DOWN, 13),
  89         LK_CMD_MODE(LK_MODE_RPT_DOWN, 14),
  90         LK_CMD_DIS_KEYCLK,
  91         LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
  92 };
  93
  94 static void *lk201_handle;
  95
  96 static int lk201_send(unsigned char ch)
  97 {
  98         if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
  99                 printk(KERN_ERR "lk201: transmit timeout\n");
 100                 return -EIO;
 101         }
 102         return 0;
 103 }
 104
 105 static inline int lk201_get_id(void)
 106 {
 107         return lk201_send(LK_CMD_REQ_ID);
 108 }
 109
 110 static int lk201_reset(void)
 111 {
 112         int i, r;
 113
 114         for (i = 0; i < sizeof(lk201_reset_string); i++) {
 115                 r = lk201_send(lk201_reset_string[i]);
 116                 if (r < 0)
 117                         return r;
 118         }
 119         return 0;
 120 }
 121
 122 static void lk201_report(unsigned char id[6])
 123 {
 124         char *report = "lk201: keyboard attached, ";
 125
 126         switch (id[2]) {
 127         case LK_STAT_PWRUP_OK:
 128                 printk(KERN_INFO "%sself-test OK\n", report);
 129                 break;
 130         case LK_STAT_PWRUP_KDOWN:
 131                 /* The keyboard will resend the power-up ID
 132                    after all keys are released, so we don't
 133                    bother handling the error specially.  Still
 134                    there may be a short-circuit inside.
 135                  */
 136                 printk(KERN_ERR "%skey down (stuck?), code: 0x%02x\n",
 137                        report, id[3]);
 138                 break;
 139         case LK_STAT_PWRUP_ERROR:
 140                 printk(KERN_ERR "%sself-test failure\n", report);
 141                 break;
 142         default:
 143                 printk(KERN_ERR "%sunknown error: 0x%02x\n",
 144                        report, id[2]);
 145         }
 146 }
 147
 148 static void lk201_id(unsigned char id[6])
 149 {
 150         /*
 151          * Report whether there is an LK201 or an LK401
 152          * The LK401 has ALT keys...
 153          */
 154         switch (id[4]) {
 155         case 1:
 156                 printk(KERN_INFO "lk201: LK201 detected\n");
 157                 break;
 158         case 2:
 159                 printk(KERN_INFO "lk201: LK401 detected\n");
 160                 break;
 161         case 3:
 162                 printk(KERN_INFO "lk201: LK443 detected\n");
 163                 break;
 164         case 4:
 165                 printk(KERN_INFO "lk201: LK421 detected\n");
 166                 break;
 167         default:
 168                 printk(KERN_WARNING
 169                        "lk201: unknown keyboard detected, ID %d\n", id[4]);
 170                 printk(KERN_WARNING "lk201: ... please report to "
 171                        "<linux-mips@linux-mips.org>\n");
 172         }
 173 }
 174
 175 #define DEFAULT_KEYB_REP_DELAY  (250/5) /* [5ms] */
 176 #define DEFAULT_KEYB_REP_RATE   30      /* [cps] */
 177
 178 static struct kbd_repeat kbdrate = {
 179         DEFAULT_KEYB_REP_DELAY,
 180         DEFAULT_KEYB_REP_RATE
 181 };
 182
 183 static void parse_kbd_rate(struct kbd_repeat *r)
 184 {
 185         if (r->delay <= 0)
 186                 r->delay = kbdrate.delay;
 187         if (r->rate <= 0)
 188                 r->rate = kbdrate.rate;
 189
 190         if (r->delay < 5)
 191                 r->delay = 5;
 192         if (r->delay > 630)
 193                 r->delay = 630;
 194         if (r->rate < 12)
 195                 r->rate = 12;
 196         if (r->rate > 127)
 197                 r->rate = 127;
 198         if (r->rate == 125)
 199                 r->rate = 124;
 200 }
 201
 202 static int write_kbd_rate(struct kbd_repeat *rep)
 203 {
 204         int delay, rate;
 205         int i;
 206
 207         delay = rep->delay / 5;
 208         rate = rep->rate;
 209         for (i = 0; i < 4; i++) {
 210                 if (lk201_hook.poll_tx_char(lk201_handle,
 211                                             LK_CMD_RPT_RATE(i)))
 212                         return 1;
 213                 if (lk201_hook.poll_tx_char(lk201_handle,
 214                                             LK_PARAM_DELAY(delay)))
 215                         return 1;
 216                 if (lk201_hook.poll_tx_char(lk201_handle,
 217                                             LK_PARAM_RATE(rate)))
 218                         return 1;
 219         }
 220         return 0;
 221 }
 222
 223 static int lk201_kbd_rate(struct kbd_repeat *rep)
 224 {
 225         if (rep == NULL)
 226                 return -EINVAL;
 227
 228         parse_kbd_rate(rep);
 229
 230         if (write_kbd_rate(rep)) {
 231                 memcpy(rep, &kbdrate, sizeof(struct kbd_repeat));
 232                 return -EIO;
 233         }
 234
 235         memcpy(&kbdrate, rep, sizeof(struct kbd_repeat));
 236
 237         return 0;
 238 }
 239
 240 static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
 241 {
 242         if (!ticks)
 243                 return;
 244
 245         /*
 246          * Can't set frequency and we "approximate"
 247          * duration by volume. ;-)
 248          */
 249         ticks /= HZ / 32;
 250         if (ticks > 7)
 251                 ticks = 7;
 252         ticks = 7 - ticks;
 253
 254         if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
 255                 return;
 256         if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
 257                 return;
 258         if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
 259                 return;
 260 }
 261
 262 void kbd_leds(unsigned char leds)
 263 {
 264         unsigned char l = 0;
 265
 266         if (!lk201_handle)              /* FIXME */
 267                 return;
 268
 269         /* FIXME -- Only Hold and Lock LEDs for now. --macro */
 270         if (leds & LED_SCR)
 271                 l |= LK_LED_HOLD;
 272         if (leds & LED_CAP)
 273                 l |= LK_LED_LOCK;
 274
 275         if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
 276                 return;
 277         if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
 278                 return;
 279         if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
 280                 return;
 281         if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
 282                 return;
 283 }
 284
 285 int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
 286 {
 287         return -EINVAL;
 288 }
 289
 290 int kbd_getkeycode(unsigned int scancode)
 291 {
 292         return -EINVAL;
 293 }
 294
 295 int kbd_translate(unsigned char scancode, unsigned char *keycode,
 296                   char raw_mode)
 297 {
 298         *keycode = scancode;
 299         return 1;
 300 }
 301
 302 char kbd_unexpected_up(unsigned char keycode)
 303 {
 304         return 0x80;
 305 }
 306
 307 static void lk201_rx_char(unsigned char ch, unsigned char fl)
 308 {
 309         static unsigned char id[6];
 310         static int id_i;
 311
 312         static int shift_state = 0;
 313         static int prev_scancode;
 314         unsigned char c = scancodeRemap[ch];
 315
 316         if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
 317                 printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
 318                 return;
 319         }
 320
 321         /* Assume this is a power-up ID. */
 322         if (ch == LK_STAT_PWRUP_ID && !id_i) {
 323                 id[id_i++] = ch;
 324                 return;
 325         }
 326
 327         /* Handle the power-up sequence. */
 328         if (id_i) {
 329                 id[id_i++] = ch;
 330                 if (id_i == 4) {
 331                         /* OK, the power-up concluded. */
 332                         lk201_report(id);
 333                         if (id[2] == LK_STAT_PWRUP_OK)
 334                                 lk201_get_id();
 335                         else {
 336                                 id_i = 0;
 337                                 printk(KERN_ERR "lk201: keyboard power-up "
 338                                        "error, skipping initialization\n");
 339                         }
 340                 } else if (id_i == 6) {
 341                         /* We got the ID; report it and start operation. */
 342                         id_i = 0;
 343                         lk201_id(id);
 344                         lk201_reset();
 345                 }
 346                 return;
 347         }
 348
 349         /* Everything else is a scancode/status response. */
 350         id_i = 0;
 351         switch (ch) {
 352         case LK_STAT_RESUME_ERR:
 353         case LK_STAT_ERROR:
 354         case LK_STAT_INHIBIT_ACK:
 355         case LK_STAT_TEST_ACK:
 356         case LK_STAT_MODE_KEYDOWN:
 357         case LK_STAT_MODE_ACK:
 358                 break;
 359         case LK_KEY_LOCK:
 360                 shift_state ^= LK_LOCK;
 361                 handle_scancode(c, (shift_state & LK_LOCK) ? 1 : 0);
 362                 break;
 363         case LK_KEY_SHIFT:
 364                 shift_state ^= LK_SHIFT;
 365                 handle_scancode(c, (shift_state & LK_SHIFT) ? 1 : 0);
 366                 break;
 367         case LK_KEY_CTRL:
 368                 shift_state ^= LK_CTRL;
 369                 handle_scancode(c, (shift_state & LK_CTRL) ? 1 : 0);
 370                 break;
 371         case LK_KEY_COMP:
 372                 shift_state ^= LK_COMP;
 373                 handle_scancode(c, (shift_state & LK_COMP) ? 1 : 0);
 374                 break;
 375         case LK_KEY_RELEASE:
 376                 if (shift_state & LK_SHIFT)
 377                         handle_scancode(scancodeRemap[LK_KEY_SHIFT], 0);
 378                 if (shift_state & LK_CTRL)
 379                         handle_scancode(scancodeRemap[LK_KEY_CTRL], 0);
 380                 if (shift_state & LK_COMP)
 381                         handle_scancode(scancodeRemap[LK_KEY_COMP], 0);
 382                 if (shift_state & LK_LOCK)
 383                         handle_scancode(scancodeRemap[LK_KEY_LOCK], 0);
 384                 shift_state = 0;
 385                 break;
 386         case LK_KEY_REPEAT:
 387                 handle_scancode(prev_scancode, 1);
 388                 break;
 389         default:
 390                 prev_scancode = c;
 391                 handle_scancode(c, 1);
 392                 break;
 393         }
 394         tasklet_schedule(&keyboard_tasklet);
 395 }
 396
 397 static void __init lk201_info(void *handle)
 398 {
 399 }
 400
 401 static int __init lk201_init(void *handle)
 402 {
 403         /* First install handlers. */
 404         lk201_handle = handle;
 405         kbd_rate = lk201_kbd_rate;
 406         kd_mksound = lk201_kd_mksound;
 407
 408         lk201_hook.rx_char = lk201_rx_char;
 409
 410         /* Then just issue a reset -- the handlers will do the rest. */
 411         lk201_send(LK_CMD_POWER_UP);
 412
 413         return 0;
 414 }
 415
 416 void __init kbd_init_hw(void)
 417 {
 418         /* Maxine uses LK501 at the Access.Bus. */
 419         if (!LK_IFACE)
 420                 return;
 421
 422         printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
 423
 424         if (LK_IFACE_ZS) {
 425                 /*
 426                  * kbd_init_hw() is being called before
 427                  * rs_init() so just register the kbd hook
 428                  * and let zs_init do the rest :-)
 429                  */
 430                 if (!register_dec_serial_hook(KEYB_LINE, &lk201_hook))
 431                         unregister_dec_serial_hook(KEYB_LINE);
 432         } else {
 433                 /*
 434                  * TODO: modify dz.c to allow similar hooks
 435                  * for LK201 handling on DS2100, DS3100, and DS5000/200
 436                  */
 437                 printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
 438         }
 439 }