2 * Copyright (C) 2003-2008 Takahiro Hirofuchi
4 * This is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
20 #include <linux/slab.h>
22 #include "usbip_common.h"
24 #include "../../usb/core/hcd.h"
27 static int is_clear_halt_cmd(struct urb *urb)
29 struct usb_ctrlrequest *req;
31 req = (struct usb_ctrlrequest *) urb->setup_packet;
33 return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
34 (req->bRequestType == USB_RECIP_ENDPOINT) &&
35 (req->wValue == USB_ENDPOINT_HALT);
38 static int is_set_interface_cmd(struct urb *urb)
40 struct usb_ctrlrequest *req;
42 req = (struct usb_ctrlrequest *) urb->setup_packet;
44 return (req->bRequest == USB_REQ_SET_INTERFACE) &&
45 (req->bRequestType == USB_RECIP_INTERFACE);
48 static int is_set_configuration_cmd(struct urb *urb)
50 struct usb_ctrlrequest *req;
52 req = (struct usb_ctrlrequest *) urb->setup_packet;
54 return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
55 (req->bRequestType == USB_RECIP_DEVICE);
58 static int is_reset_device_cmd(struct urb *urb)
60 struct usb_ctrlrequest *req;
64 req = (struct usb_ctrlrequest *) urb->setup_packet;
65 value = le16_to_cpu(req->wValue);
66 index = le16_to_cpu(req->wIndex);
68 if ((req->bRequest == USB_REQ_SET_FEATURE) &&
69 (req->bRequestType == USB_RT_PORT) &&
70 (value == USB_PORT_FEAT_RESET)) {
71 usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
77 static int tweak_clear_halt_cmd(struct urb *urb)
79 struct usb_ctrlrequest *req;
85 req = (struct usb_ctrlrequest *) urb->setup_packet;
88 * The stalled endpoint is specified in the wIndex value. The endpoint
89 * of the urb is the target of this clear_halt request (i.e., control
92 target_endp = le16_to_cpu(req->wIndex) & 0x000f;
94 /* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80. */
95 target_dir = le16_to_cpu(req->wIndex) & 0x0080;
98 target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
100 target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
102 ret = usb_clear_halt(urb->dev, target_pipe);
104 usbip_uinfo("clear_halt error: devnum %d endp %d, %d\n",
105 urb->dev->devnum, target_endp, ret);
107 usbip_uinfo("clear_halt done: devnum %d endp %d\n",
108 urb->dev->devnum, target_endp);
113 static int tweak_set_interface_cmd(struct urb *urb)
115 struct usb_ctrlrequest *req;
120 req = (struct usb_ctrlrequest *) urb->setup_packet;
121 alternate = le16_to_cpu(req->wValue);
122 interface = le16_to_cpu(req->wIndex);
124 usbip_dbg_stub_rx("set_interface: inf %u alt %u\n", interface,
127 ret = usb_set_interface(urb->dev, interface, alternate);
129 usbip_uinfo("set_interface error: inf %u alt %u, %d\n",
130 interface, alternate, ret);
132 usbip_uinfo("set_interface done: inf %u alt %u\n",
139 static int tweak_set_configuration_cmd(struct urb *urb)
141 struct usb_ctrlrequest *req;
144 req = (struct usb_ctrlrequest *) urb->setup_packet;
145 config = le16_to_cpu(req->wValue);
148 * I have never seen a multi-config device. Very rare.
149 * For most devices, this will be called to choose a default
150 * configuration only once in an initialization phase.
152 * set_configuration may change a device configuration and its device
153 * drivers will be unbound and assigned for a new device configuration.
154 * This means this usbip driver will be also unbound when called, then
155 * eventually reassigned to the device as far as driver matching
158 * Unfortunatelly, an existing usbip connection will be dropped
159 * due to this driver unbinding. So, skip here.
160 * A user may need to set a special configuration value before
161 * exporting the device.
163 usbip_uinfo("set_configuration (%d) to %s\n", config,
164 dev_name(&urb->dev->dev));
165 usbip_uinfo("but, skip!\n");
168 /* return usb_driver_set_configuration(urb->dev, config); */
171 static int tweak_reset_device_cmd(struct urb *urb)
173 struct usb_ctrlrequest *req;
178 req = (struct usb_ctrlrequest *) urb->setup_packet;
179 value = le16_to_cpu(req->wValue);
180 index = le16_to_cpu(req->wIndex);
182 usbip_uinfo("reset_device (port %d) to %s\n", index,
183 dev_name(&urb->dev->dev));
185 /* all interfaces should be owned by usbip driver, so just reset it. */
186 ret = usb_lock_device_for_reset(urb->dev, NULL);
188 dev_err(&urb->dev->dev, "lock for reset\n");
192 /* try to reset the device */
193 ret = usb_reset_device(urb->dev);
195 dev_err(&urb->dev->dev, "device reset\n");
197 usb_unlock_device(urb->dev);
203 * clear_halt, set_interface, and set_configuration require special tricks.
205 static void tweak_special_requests(struct urb *urb)
207 if (!urb || !urb->setup_packet)
210 if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
213 if (is_clear_halt_cmd(urb))
214 /* tweak clear_halt */
215 tweak_clear_halt_cmd(urb);
217 else if (is_set_interface_cmd(urb))
218 /* tweak set_interface */
219 tweak_set_interface_cmd(urb);
221 else if (is_set_configuration_cmd(urb))
222 /* tweak set_configuration */
223 tweak_set_configuration_cmd(urb);
225 else if (is_reset_device_cmd(urb))
226 tweak_reset_device_cmd(urb);
228 usbip_dbg_stub_rx("no need to tweak\n");
232 * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
233 * By unlinking the urb asynchronously, stub_rx can continuously
234 * process coming urbs. Even if the urb is unlinked, its completion
235 * handler will be called and stub_tx will send a return pdu.
237 * See also comments about unlinking strategy in vhci_hcd.c.
239 static int stub_recv_cmd_unlink(struct stub_device *sdev,
240 struct usbip_header *pdu)
244 struct stub_priv *priv;
247 spin_lock_irqsave(&sdev->priv_lock, flags);
249 list_for_each_entry(priv, &sdev->priv_init, list) {
250 if (priv->seqnum == pdu->u.cmd_unlink.seqnum) {
253 dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
257 * This matched urb is not completed yet (i.e., be in
258 * flight in usb hcd hardware/driver). Now we are
259 * cancelling it. The unlinking flag means that we are
260 * now not going to return the normal result pdu of a
261 * submission request, but going to return a result pdu
262 * of the unlink request.
267 * In the case that unlinking flag is on, prev->seqnum
268 * is changed from the seqnum of the cancelling urb to
269 * the seqnum of the unlink request. This will be used
270 * to make the result pdu of the unlink request.
272 priv->seqnum = pdu->base.seqnum;
274 spin_unlock_irqrestore(&sdev->priv_lock, flags);
277 * usb_unlink_urb() is now out of spinlocking to avoid
278 * spinlock recursion since stub_complete() is
279 * sometimes called in this context but not in the
280 * interrupt context. If stub_complete() is executed
281 * before we call usb_unlink_urb(), usb_unlink_urb()
282 * will return an error value. In this case, stub_tx
283 * will return the result pdu of this unlink request
284 * though submission is completed and actual unlinking
285 * is not executed. OK?
287 /* In the above case, urb->status is not -ECONNRESET,
288 * so a driver in a client host will know the failure
289 * of the unlink request ?
291 ret = usb_unlink_urb(priv->urb);
292 if (ret != -EINPROGRESS)
293 dev_err(&priv->urb->dev->dev,
294 "failed to unlink a urb %p, ret %d\n",
300 usbip_dbg_stub_rx("seqnum %d is not pending\n",
301 pdu->u.cmd_unlink.seqnum);
304 * The urb of the unlink target is not found in priv_init queue. It was
305 * already completed and its results is/was going to be sent by a
306 * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
307 * return the completeness of this unlink request to vhci_hcd.
309 stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
311 spin_unlock_irqrestore(&sdev->priv_lock, flags);
317 static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
319 struct usbip_device *ud = &sdev->ud;
321 if (pdu->base.devid == sdev->devid) {
322 spin_lock(&ud->lock);
323 if (ud->status == SDEV_ST_USED) {
324 /* A request is valid. */
325 spin_unlock(&ud->lock);
328 spin_unlock(&ud->lock);
334 static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
335 struct usbip_header *pdu)
337 struct stub_priv *priv;
338 struct usbip_device *ud = &sdev->ud;
341 spin_lock_irqsave(&sdev->priv_lock, flags);
343 priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
345 dev_err(&sdev->interface->dev, "alloc stub_priv\n");
346 spin_unlock_irqrestore(&sdev->priv_lock, flags);
347 usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
351 priv->seqnum = pdu->base.seqnum;
355 * After a stub_priv is linked to a list_head,
356 * our error handler can free allocated data.
358 list_add_tail(&priv->list, &sdev->priv_init);
360 spin_unlock_irqrestore(&sdev->priv_lock, flags);
366 static struct usb_host_endpoint *get_ep_from_epnum(struct usb_device *udev,
369 struct usb_host_config *config;
371 struct usb_host_endpoint *ep = NULL;
378 config = udev->actconfig;
382 for (i = 0; i < config->desc.bNumInterfaces; i++) {
383 struct usb_host_interface *setting;
385 setting = config->interface[i]->cur_altsetting;
387 for (j = 0; j < setting->desc.bNumEndpoints; j++) {
388 ep = &setting->endpoint[j];
389 epnum = (ep->desc.bEndpointAddress & 0x7f);
391 if (epnum == epnum0) {
392 /* usbip_uinfo("found epnum %d\n", epnum0);*/
406 static int get_pipe(struct stub_device *sdev, int epnum, int dir)
408 struct usb_device *udev = interface_to_usbdev(sdev->interface);
409 struct usb_host_endpoint *ep;
410 struct usb_endpoint_descriptor *epd = NULL;
412 ep = get_ep_from_epnum(udev, epnum);
414 dev_err(&sdev->interface->dev, "no such endpoint?, %d\n",
423 /* epnum 0 is always control */
425 if (dir == USBIP_DIR_OUT)
426 return usb_sndctrlpipe(udev, 0);
428 return usb_rcvctrlpipe(udev, 0);
432 if (usb_endpoint_xfer_control(epd)) {
433 if (dir == USBIP_DIR_OUT)
434 return usb_sndctrlpipe(udev, epnum);
436 return usb_rcvctrlpipe(udev, epnum);
439 if (usb_endpoint_xfer_bulk(epd)) {
440 if (dir == USBIP_DIR_OUT)
441 return usb_sndbulkpipe(udev, epnum);
443 return usb_rcvbulkpipe(udev, epnum);
446 if (usb_endpoint_xfer_int(epd)) {
447 if (dir == USBIP_DIR_OUT)
448 return usb_sndintpipe(udev, epnum);
450 return usb_rcvintpipe(udev, epnum);
453 if (usb_endpoint_xfer_isoc(epd)) {
454 if (dir == USBIP_DIR_OUT)
455 return usb_sndisocpipe(udev, epnum);
457 return usb_rcvisocpipe(udev, epnum);
461 dev_err(&sdev->interface->dev, "get pipe, epnum %d\n", epnum);
465 static void stub_recv_cmd_submit(struct stub_device *sdev,
466 struct usbip_header *pdu)
469 struct stub_priv *priv;
470 struct usbip_device *ud = &sdev->ud;
471 struct usb_device *udev = interface_to_usbdev(sdev->interface);
472 int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
475 priv = stub_priv_alloc(sdev, pdu);
480 if (usb_pipeisoc(pipe))
481 priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
484 priv->urb = usb_alloc_urb(0, GFP_KERNEL);
487 dev_err(&sdev->interface->dev, "malloc urb\n");
488 usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
492 /* set priv->urb->transfer_buffer */
493 if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
494 priv->urb->transfer_buffer =
495 kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
497 if (!priv->urb->transfer_buffer) {
498 dev_err(&sdev->interface->dev, "malloc x_buff\n");
499 usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
504 /* set priv->urb->setup_packet */
505 priv->urb->setup_packet = kzalloc(8, GFP_KERNEL);
506 if (!priv->urb->setup_packet) {
507 dev_err(&sdev->interface->dev, "allocate setup_packet\n");
508 usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
511 memcpy(priv->urb->setup_packet, &pdu->u.cmd_submit.setup, 8);
513 /* set other members from the base header of pdu */
514 priv->urb->context = (void *) priv;
515 priv->urb->dev = udev;
516 priv->urb->pipe = pipe;
517 priv->urb->complete = stub_complete;
519 usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
522 if (usbip_recv_xbuff(ud, priv->urb) < 0)
525 if (usbip_recv_iso(ud, priv->urb) < 0)
528 /* no need to submit an intercepted request, but harmless? */
529 tweak_special_requests(priv->urb);
531 /* urb is now ready to submit */
532 ret = usb_submit_urb(priv->urb, GFP_KERNEL);
535 usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
538 dev_err(&sdev->interface->dev, "submit_urb error, %d\n", ret);
539 usbip_dump_header(pdu);
540 usbip_dump_urb(priv->urb);
544 * This connection will be discarded.
546 usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
549 usbip_dbg_stub_rx("Leave\n");
554 static void stub_rx_pdu(struct usbip_device *ud)
557 struct usbip_header pdu;
558 struct stub_device *sdev = container_of(ud, struct stub_device, ud);
559 struct device *dev = &sdev->interface->dev;
561 usbip_dbg_stub_rx("Enter\n");
563 memset(&pdu, 0, sizeof(pdu));
565 /* 1. receive a pdu header */
566 ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0);
567 if (ret != sizeof(pdu)) {
568 dev_err(dev, "recv a header, %d\n", ret);
569 usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
573 usbip_header_correct_endian(&pdu, 0);
575 if (usbip_dbg_flag_stub_rx)
576 usbip_dump_header(&pdu);
578 if (!valid_request(sdev, &pdu)) {
579 dev_err(dev, "recv invalid request\n");
580 usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
584 switch (pdu.base.command) {
585 case USBIP_CMD_UNLINK:
586 stub_recv_cmd_unlink(sdev, &pdu);
589 case USBIP_CMD_SUBMIT:
590 stub_recv_cmd_submit(sdev, &pdu);
595 dev_err(dev, "unknown pdu\n");
596 usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
602 void stub_rx_loop(struct usbip_task *ut)
604 struct usbip_device *ud = container_of(ut, struct usbip_device, tcp_rx);
607 if (signal_pending(current)) {
608 usbip_dbg_stub_rx("signal caught!\n");
612 if (usbip_event_happened(ud))