SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/ssb/main.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Subsystem core
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include "ssb_private.h"
  12
  13 #include <linux/delay.h>
  14 #include <linux/io.h>
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/pci.h>
  19
  20 #include <pcmcia/cs_types.h>
  21 #include <pcmcia/cs.h>
  22 #include <pcmcia/cistpl.h>
  23 #include <pcmcia/ds.h>
  24
  25
  26 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
  27 MODULE_LICENSE("GPL");
  28
  29
  30 /* Temporary list of yet-to-be-attached buses */
  31 static LIST_HEAD(attach_queue);
  32 /* List if running buses */
  33 static LIST_HEAD(buses);
  34 /* Software ID counter */
  35 static unsigned int next_busnumber;
  36 /* buses_mutes locks the two buslists and the next_busnumber.
  37  * Don't lock this directly, but use ssb_buses_[un]lock() below. */
  38 static DEFINE_MUTEX(buses_mutex);
  39
  40 /* There are differences in the codeflow, if the bus is
  41  * initialized from early boot, as various needed services
  42  * are not available early. This is a mechanism to delay
  43  * these initializations to after early boot has finished.
  44  * It's also used to avoid mutex locking, as that's not
  45  * available and needed early. */
  46 static bool ssb_is_early_boot = 1;
  47
  48 static void ssb_buses_lock(void);
  49 static void ssb_buses_unlock(void);
  50
  51
  52 #ifdef CONFIG_SSB_PCIHOST
  53 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
  54 {
  55         struct ssb_bus *bus;
  56
  57         ssb_buses_lock();
  58         list_for_each_entry(bus, &buses, list) {
  59                 if (bus->bustype == SSB_BUSTYPE_PCI &&
  60                     bus->host_pci == pdev)
  61                         goto found;
  62         }
  63         bus = NULL;
  64 found:
  65         ssb_buses_unlock();
  66
  67         return bus;
  68 }
  69 #endif /* CONFIG_SSB_PCIHOST */
  70
  71 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
  72 {
  73         if (dev)
  74                 get_device(dev->dev);
  75         return dev;
  76 }
  77
  78 static void ssb_device_put(struct ssb_device *dev)
  79 {
  80         if (dev)
  81                 put_device(dev->dev);
  82 }
  83
  84 static int ssb_bus_resume(struct ssb_bus *bus)
  85 {
  86         int err;
  87
  88         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
  89         err = ssb_pcmcia_init(bus);
  90         if (err) {
  91                 /* No need to disable XTAL, as we don't have one on PCMCIA. */
  92                 return err;
  93         }
  94         ssb_chipco_resume(&bus->chipco);
  95
  96         return 0;
  97 }
  98
  99 static int ssb_device_resume(struct device *dev)
 100 {
 101         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 102         struct ssb_driver *ssb_drv;
 103         struct ssb_bus *bus;
 104         int err = 0;
 105
 106         bus = ssb_dev->bus;
 107         if (bus->suspend_cnt == bus->nr_devices) {
 108                 err = ssb_bus_resume(bus);
 109                 if (err)
 110                         return err;
 111         }
 112         bus->suspend_cnt--;
 113         if (dev->driver) {
 114                 ssb_drv = drv_to_ssb_drv(dev->driver);
 115                 if (ssb_drv && ssb_drv->resume)
 116                         err = ssb_drv->resume(ssb_dev);
 117                 if (err)
 118                         goto out;
 119         }
 120 out:
 121         return err;
 122 }
 123
 124 static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 125 {
 126         ssb_chipco_suspend(&bus->chipco, state);
 127         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 128
 129         /* Reset HW state information in memory, so that HW is
 130          * completely reinitialized on resume. */
 131         bus->mapped_device = NULL;
 132 #ifdef CONFIG_SSB_DRIVER_PCICORE
 133         bus->pcicore.setup_done = 0;
 134 #endif
 135 #ifdef CONFIG_SSB_DEBUG
 136         bus->powered_up = 0;
 137 #endif
 138 }
 139
 140 static int ssb_device_suspend(struct device *dev, pm_message_t state)
 141 {
 142         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 143         struct ssb_driver *ssb_drv;
 144         struct ssb_bus *bus;
 145         int err = 0;
 146
 147         if (dev->driver) {
 148                 ssb_drv = drv_to_ssb_drv(dev->driver);
 149                 if (ssb_drv && ssb_drv->suspend)
 150                         err = ssb_drv->suspend(ssb_dev, state);
 151                 if (err)
 152                         goto out;
 153         }
 154
 155         bus = ssb_dev->bus;
 156         bus->suspend_cnt++;
 157         if (bus->suspend_cnt == bus->nr_devices) {
 158                 /* All devices suspended. Shutdown the bus. */
 159                 ssb_bus_suspend(bus, state);
 160         }
 161
 162 out:
 163         return err;
 164 }
 165
 166 #ifdef CONFIG_SSB_PCIHOST
 167 int ssb_devices_freeze(struct ssb_bus *bus)
 168 {
 169         struct ssb_device *dev;
 170         struct ssb_driver *drv;
 171         int err = 0;
 172         int i;
 173         pm_message_t state = PMSG_FREEZE;
 174
 175         /* First check that we are capable to freeze all devices. */
 176         for (i = 0; i < bus->nr_devices; i++) {
 177                 dev = &(bus->devices[i]);
 178                 if (!dev->dev ||
 179                     !dev->dev->driver ||
 180                     !device_is_registered(dev->dev))
 181                         continue;
 182                 drv = drv_to_ssb_drv(dev->dev->driver);
 183                 if (!drv)
 184                         continue;
 185                 if (!drv->suspend) {
 186                         /* Nope, can't suspend this one. */
 187                         return -EOPNOTSUPP;
 188                 }
 189         }
 190         /* Now suspend all devices */
 191         for (i = 0; i < bus->nr_devices; i++) {
 192                 dev = &(bus->devices[i]);
 193                 if (!dev->dev ||
 194                     !dev->dev->driver ||
 195                     !device_is_registered(dev->dev))
 196                         continue;
 197                 drv = drv_to_ssb_drv(dev->dev->driver);
 198                 if (!drv)
 199                         continue;
 200                 err = drv->suspend(dev, state);
 201                 if (err) {
 202                         ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 203                                    dev->dev->bus_id);
 204                         goto err_unwind;
 205                 }
 206         }
 207
 208         return 0;
 209 err_unwind:
 210         for (i--; i >= 0; i--) {
 211                 dev = &(bus->devices[i]);
 212                 if (!dev->dev ||
 213                     !dev->dev->driver ||
 214                     !device_is_registered(dev->dev))
 215                         continue;
 216                 drv = drv_to_ssb_drv(dev->dev->driver);
 217                 if (!drv)
 218                         continue;
 219                 if (drv->resume)
 220                         drv->resume(dev);
 221         }
 222         return err;
 223 }
 224
 225 int ssb_devices_thaw(struct ssb_bus *bus)
 226 {
 227         struct ssb_device *dev;
 228         struct ssb_driver *drv;
 229         int err;
 230         int i;
 231
 232         for (i = 0; i < bus->nr_devices; i++) {
 233                 dev = &(bus->devices[i]);
 234                 if (!dev->dev ||
 235                     !dev->dev->driver ||
 236                     !device_is_registered(dev->dev))
 237                         continue;
 238                 drv = drv_to_ssb_drv(dev->dev->driver);
 239                 if (!drv)
 240                         continue;
 241                 if (SSB_WARN_ON(!drv->resume))
 242                         continue;
 243                 err = drv->resume(dev);
 244                 if (err) {
 245                         ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
 246                                    dev->dev->bus_id);
 247                 }
 248         }
 249
 250         return 0;
 251 }
 252 #endif /* CONFIG_SSB_PCIHOST */
 253
 254 static void ssb_device_shutdown(struct device *dev)
 255 {
 256         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 257         struct ssb_driver *ssb_drv;
 258
 259         if (!dev->driver)
 260                 return;
 261         ssb_drv = drv_to_ssb_drv(dev->driver);
 262         if (ssb_drv && ssb_drv->shutdown)
 263                 ssb_drv->shutdown(ssb_dev);
 264 }
 265
 266 static int ssb_device_remove(struct device *dev)
 267 {
 268         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 269         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 270
 271         if (ssb_drv && ssb_drv->remove)
 272                 ssb_drv->remove(ssb_dev);
 273         ssb_device_put(ssb_dev);
 274
 275         return 0;
 276 }
 277
 278 static int ssb_device_probe(struct device *dev)
 279 {
 280         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 281         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 282         int err = 0;
 283
 284         ssb_device_get(ssb_dev);
 285         if (ssb_drv && ssb_drv->probe)
 286                 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
 287         if (err)
 288                 ssb_device_put(ssb_dev);
 289
 290         return err;
 291 }
 292
 293 static int ssb_match_devid(const struct ssb_device_id *tabid,
 294                            const struct ssb_device_id *devid)
 295 {
 296         if ((tabid->vendor != devid->vendor) &&
 297             tabid->vendor != SSB_ANY_VENDOR)
 298                 return 0;
 299         if ((tabid->coreid != devid->coreid) &&
 300             tabid->coreid != SSB_ANY_ID)
 301                 return 0;
 302         if ((tabid->revision != devid->revision) &&
 303             tabid->revision != SSB_ANY_REV)
 304                 return 0;
 305         return 1;
 306 }
 307
 308 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 309 {
 310         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 311         struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
 312         const struct ssb_device_id *id;
 313
 314         for (id = ssb_drv->id_table;
 315              id->vendor || id->coreid || id->revision;
 316              id++) {
 317                 if (ssb_match_devid(id, &ssb_dev->id))
 318                         return 1; /* found */
 319         }
 320
 321         return 0;
 322 }
 323
 324 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 325 {
 326         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 327
 328         if (!dev)
 329                 return -ENODEV;
 330
 331         return add_uevent_var(env,
 332                              "MODALIAS=ssb:v%04Xid%04Xrev%02X",
 333                              ssb_dev->id.vendor, ssb_dev->id.coreid,
 334                              ssb_dev->id.revision);
 335 }
 336
 337 static struct bus_type ssb_bustype = {
 338         .name           = "ssb",
 339         .match          = ssb_bus_match,
 340         .probe          = ssb_device_probe,
 341         .remove         = ssb_device_remove,
 342         .shutdown       = ssb_device_shutdown,
 343         .suspend        = ssb_device_suspend,
 344         .resume         = ssb_device_resume,
 345         .uevent         = ssb_device_uevent,
 346 };
 347
 348 static void ssb_buses_lock(void)
 349 {
 350         /* See the comment at the ssb_is_early_boot definition */
 351         if (!ssb_is_early_boot)
 352                 mutex_lock(&buses_mutex);
 353 }
 354
 355 static void ssb_buses_unlock(void)
 356 {
 357         /* See the comment at the ssb_is_early_boot definition */
 358         if (!ssb_is_early_boot)
 359                 mutex_unlock(&buses_mutex);
 360 }
 361
 362 static void ssb_devices_unregister(struct ssb_bus *bus)
 363 {
 364         struct ssb_device *sdev;
 365         int i;
 366
 367         for (i = bus->nr_devices - 1; i >= 0; i--) {
 368                 sdev = &(bus->devices[i]);
 369                 if (sdev->dev)
 370                         device_unregister(sdev->dev);
 371         }
 372 }
 373
 374 void ssb_bus_unregister(struct ssb_bus *bus)
 375 {
 376         ssb_buses_lock();
 377         ssb_devices_unregister(bus);
 378         list_del(&bus->list);
 379         ssb_buses_unlock();
 380
 381         /* ssb_pcmcia_exit(bus); */
 382         ssb_pci_exit(bus);
 383         ssb_iounmap(bus);
 384 }
 385 EXPORT_SYMBOL(ssb_bus_unregister);
 386
 387 static void ssb_release_dev(struct device *dev)
 388 {
 389         struct __ssb_dev_wrapper *devwrap;
 390
 391         devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
 392         kfree(devwrap);
 393 }
 394
 395 static int ssb_devices_register(struct ssb_bus *bus)
 396 {
 397         struct ssb_device *sdev;
 398         struct device *dev;
 399         struct __ssb_dev_wrapper *devwrap;
 400         int i, err = 0;
 401         int dev_idx = 0;
 402
 403         for (i = 0; i < bus->nr_devices; i++) {
 404                 sdev = &(bus->devices[i]);
 405
 406                 /* We don't register SSB-system devices to the kernel,
 407                  * as the drivers for them are built into SSB. */
 408                 switch (sdev->id.coreid) {
 409                 case SSB_DEV_CHIPCOMMON:
 410                 case SSB_DEV_PCI:
 411                 case SSB_DEV_PCIE:
 412                 case SSB_DEV_PCMCIA:
 413                 case SSB_DEV_MIPS:
 414                 case SSB_DEV_MIPS_3302:
 415                 case SSB_DEV_EXTIF:
 416                         continue;
 417                 }
 418
 419                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 420                 if (!devwrap) {
 421                         ssb_printk(KERN_ERR PFX
 422                                    "Could not allocate device\n");
 423                         err = -ENOMEM;
 424                         goto error;
 425                 }
 426                 dev = &devwrap->dev;
 427                 devwrap->sdev = sdev;
 428
 429                 dev->release = ssb_release_dev;
 430                 dev->bus = &ssb_bustype;
 431                 snprintf(dev->bus_id, sizeof(dev->bus_id),
 432                          "ssb%u:%d", bus->busnumber, dev_idx);
 433
 434                 switch (bus->bustype) {
 435                 case SSB_BUSTYPE_PCI:
 436 #ifdef CONFIG_SSB_PCIHOST
 437                         sdev->irq = bus->host_pci->irq;
 438                         dev->parent = &bus->host_pci->dev;
 439 #endif
 440                         break;
 441                 case SSB_BUSTYPE_PCMCIA:
 442 #ifdef CONFIG_SSB_PCMCIAHOST
 443                         sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
 444                         dev->parent = &bus->host_pcmcia->dev;
 445 #endif
 446                         break;
 447                 case SSB_BUSTYPE_SSB:
 448                         break;
 449                 }
 450
 451                 sdev->dev = dev;
 452                 err = device_register(dev);
 453                 if (err) {
 454                         ssb_printk(KERN_ERR PFX
 455                                    "Could not register %s\n",
 456                                    dev->bus_id);
 457                         /* Set dev to NULL to not unregister
 458                          * dev on error unwinding. */
 459                         sdev->dev = NULL;
 460                         kfree(devwrap);
 461                         goto error;
 462                 }
 463                 dev_idx++;
 464         }
 465
 466         return 0;
 467 error:
 468         /* Unwind the already registered devices. */
 469         ssb_devices_unregister(bus);
 470         return err;
 471 }
 472
 473 /* Needs ssb_buses_lock() */
 474 static int ssb_attach_queued_buses(void)
 475 {
 476         struct ssb_bus *bus, *n;
 477         int err = 0;
 478         int drop_them_all = 0;
 479
 480         list_for_each_entry_safe(bus, n, &attach_queue, list) {
 481                 if (drop_them_all) {
 482                         list_del(&bus->list);
 483                         continue;
 484                 }
 485                 /* Can't init the PCIcore in ssb_bus_register(), as that
 486                  * is too early in boot for embedded systems
 487                  * (no udelay() available). So do it here in attach stage.
 488                  */
 489                 err = ssb_bus_powerup(bus, 0);
 490                 if (err)
 491                         goto error;
 492                 ssb_pcicore_init(&bus->pcicore);
 493                 ssb_bus_may_powerdown(bus);
 494
 495                 err = ssb_devices_register(bus);
 496 error:
 497                 if (err) {
 498                         drop_them_all = 1;
 499                         list_del(&bus->list);
 500                         continue;
 501                 }
 502                 list_move_tail(&bus->list, &buses);
 503         }
 504
 505         return err;
 506 }
 507
 508 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
 509 {
 510         struct ssb_bus *bus = dev->bus;
 511
 512         offset += dev->core_index * SSB_CORE_SIZE;
 513         return readw(bus->mmio + offset);
 514 }
 515
 516 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
 517 {
 518         struct ssb_bus *bus = dev->bus;
 519
 520         offset += dev->core_index * SSB_CORE_SIZE;
 521         return readl(bus->mmio + offset);
 522 }
 523
 524 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 525 {
 526         struct ssb_bus *bus = dev->bus;
 527
 528         offset += dev->core_index * SSB_CORE_SIZE;
 529         writew(value, bus->mmio + offset);
 530 }
 531
 532 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 533 {
 534         struct ssb_bus *bus = dev->bus;
 535
 536         offset += dev->core_index * SSB_CORE_SIZE;
 537         writel(value, bus->mmio + offset);
 538 }
 539
 540 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 541 static const struct ssb_bus_ops ssb_ssb_ops = {
 542         .read16         = ssb_ssb_read16,
 543         .read32         = ssb_ssb_read32,
 544         .write16        = ssb_ssb_write16,
 545         .write32        = ssb_ssb_write32,
 546 };
 547
 548 static int ssb_fetch_invariants(struct ssb_bus *bus,
 549                                 ssb_invariants_func_t get_invariants)
 550 {
 551         struct ssb_init_invariants iv;
 552         int err;
 553
 554         memset(&iv, 0, sizeof(iv));
 555         err = get_invariants(bus, &iv);
 556         if (err)
 557                 goto out;
 558         memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
 559         memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
 560         bus->has_cardbus_slot = iv.has_cardbus_slot;
 561 out:
 562         return err;
 563 }
 564
 565 static int ssb_bus_register(struct ssb_bus *bus,
 566                             ssb_invariants_func_t get_invariants,
 567                             unsigned long baseaddr)
 568 {
 569         int err;
 570
 571         spin_lock_init(&bus->bar_lock);
 572         INIT_LIST_HEAD(&bus->list);
 573 #ifdef CONFIG_SSB_EMBEDDED
 574         spin_lock_init(&bus->gpio_lock);
 575 #endif
 576
 577         /* Powerup the bus */
 578         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 579         if (err)
 580                 goto out;
 581         ssb_buses_lock();
 582         bus->busnumber = next_busnumber;
 583         /* Scan for devices (cores) */
 584         err = ssb_bus_scan(bus, baseaddr);
 585         if (err)
 586                 goto err_disable_xtal;
 587
 588         /* Init PCI-host device (if any) */
 589         err = ssb_pci_init(bus);
 590         if (err)
 591                 goto err_unmap;
 592         /* Init PCMCIA-host device (if any) */
 593         err = ssb_pcmcia_init(bus);
 594         if (err)
 595                 goto err_pci_exit;
 596
 597         /* Initialize basic system devices (if available) */
 598         err = ssb_bus_powerup(bus, 0);
 599         if (err)
 600                 goto err_pcmcia_exit;
 601         ssb_chipcommon_init(&bus->chipco);
 602         ssb_mipscore_init(&bus->mipscore);
 603         err = ssb_fetch_invariants(bus, get_invariants);
 604         if (err) {
 605                 ssb_bus_may_powerdown(bus);
 606                 goto err_pcmcia_exit;
 607         }
 608         ssb_bus_may_powerdown(bus);
 609
 610         /* Queue it for attach.
 611          * See the comment at the ssb_is_early_boot definition. */
 612         list_add_tail(&bus->list, &attach_queue);
 613         if (!ssb_is_early_boot) {
 614                 /* This is not early boot, so we must attach the bus now */
 615                 err = ssb_attach_queued_buses();
 616                 if (err)
 617                         goto err_dequeue;
 618         }
 619         next_busnumber++;
 620         ssb_buses_unlock();
 621
 622 out:
 623         return err;
 624
 625 err_dequeue:
 626         list_del(&bus->list);
 627 err_pcmcia_exit:
 628 /*      ssb_pcmcia_exit(bus); */
 629 err_pci_exit:
 630         ssb_pci_exit(bus);
 631 err_unmap:
 632         ssb_iounmap(bus);
 633 err_disable_xtal:
 634         ssb_buses_unlock();
 635         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 636         return err;
 637 }
 638
 639 #ifdef CONFIG_SSB_PCIHOST
 640 int ssb_bus_pcibus_register(struct ssb_bus *bus,
 641                             struct pci_dev *host_pci)
 642 {
 643         int err;
 644
 645         bus->bustype = SSB_BUSTYPE_PCI;
 646         bus->host_pci = host_pci;
 647         bus->ops = &ssb_pci_ops;
 648
 649         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 650         if (!err) {
 651                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 652                            "PCI device %s\n", host_pci->dev.bus_id);
 653         }
 654
 655         return err;
 656 }
 657 EXPORT_SYMBOL(ssb_bus_pcibus_register);
 658 #endif /* CONFIG_SSB_PCIHOST */
 659
 660 #ifdef CONFIG_SSB_PCMCIAHOST
 661 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 662                                struct pcmcia_device *pcmcia_dev,
 663                                unsigned long baseaddr)
 664 {
 665         int err;
 666
 667         bus->bustype = SSB_BUSTYPE_PCMCIA;
 668         bus->host_pcmcia = pcmcia_dev;
 669         bus->ops = &ssb_pcmcia_ops;
 670
 671         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 672         if (!err) {
 673                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 674                            "PCMCIA device %s\n", pcmcia_dev->devname);
 675         }
 676
 677         return err;
 678 }
 679 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 680 #endif /* CONFIG_SSB_PCMCIAHOST */
 681
 682 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 683                             unsigned long baseaddr,
 684                             ssb_invariants_func_t get_invariants)
 685 {
 686         int err;
 687
 688         bus->bustype = SSB_BUSTYPE_SSB;
 689         bus->ops = &ssb_ssb_ops;
 690
 691         err = ssb_bus_register(bus, get_invariants, baseaddr);
 692         if (!err) {
 693                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
 694                            "address 0x%08lX\n", baseaddr);
 695         }
 696
 697         return err;
 698 }
 699
 700 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
 701 {
 702         drv->drv.name = drv->name;
 703         drv->drv.bus = &ssb_bustype;
 704         drv->drv.owner = owner;
 705
 706         return driver_register(&drv->drv);
 707 }
 708 EXPORT_SYMBOL(__ssb_driver_register);
 709
 710 void ssb_driver_unregister(struct ssb_driver *drv)
 711 {
 712         driver_unregister(&drv->drv);
 713 }
 714 EXPORT_SYMBOL(ssb_driver_unregister);
 715
 716 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
 717 {
 718         struct ssb_bus *bus = dev->bus;
 719         struct ssb_device *ent;
 720         int i;
 721
 722         for (i = 0; i < bus->nr_devices; i++) {
 723                 ent = &(bus->devices[i]);
 724                 if (ent->id.vendor != dev->id.vendor)
 725                         continue;
 726                 if (ent->id.coreid != dev->id.coreid)
 727                         continue;
 728
 729                 ent->devtypedata = data;
 730         }
 731 }
 732 EXPORT_SYMBOL(ssb_set_devtypedata);
 733
 734 static u32 clkfactor_f6_resolve(u32 v)
 735 {
 736         /* map the magic values */
 737         switch (v) {
 738         case SSB_CHIPCO_CLK_F6_2:
 739                 return 2;
 740         case SSB_CHIPCO_CLK_F6_3:
 741                 return 3;
 742         case SSB_CHIPCO_CLK_F6_4:
 743                 return 4;
 744         case SSB_CHIPCO_CLK_F6_5:
 745                 return 5;
 746         case SSB_CHIPCO_CLK_F6_6:
 747                 return 6;
 748         case SSB_CHIPCO_CLK_F6_7:
 749                 return 7;
 750         }
 751         return 0;
 752 }
 753
 754 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
 755 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 756 {
 757         u32 n1, n2, clock, m1, m2, m3, mc;
 758
 759         n1 = (n & SSB_CHIPCO_CLK_N1);
 760         n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 761
 762         switch (plltype) {
 763         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 764                 if (m & SSB_CHIPCO_CLK_T6_MMASK)
 765                         return SSB_CHIPCO_CLK_T6_M0;
 766                 return SSB_CHIPCO_CLK_T6_M1;
 767         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 768         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 769         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 770         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 771                 n1 = clkfactor_f6_resolve(n1);
 772                 n2 += SSB_CHIPCO_CLK_F5_BIAS;
 773                 break;
 774         case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 775                 n1 += SSB_CHIPCO_CLK_T2_BIAS;
 776                 n2 += SSB_CHIPCO_CLK_T2_BIAS;
 777                 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
 778                 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 779                 break;
 780         case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 781                 return 100000000;
 782         default:
 783                 SSB_WARN_ON(1);
 784         }
 785
 786         switch (plltype) {
 787         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 788         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 789                 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
 790                 break;
 791         default:
 792                 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
 793         }
 794         if (!clock)
 795                 return 0;
 796
 797         m1 = (m & SSB_CHIPCO_CLK_M1);
 798         m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
 799         m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
 800         mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 801
 802         switch (plltype) {
 803         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 804         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 805         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 806         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 807                 m1 = clkfactor_f6_resolve(m1);
 808                 if ((plltype == SSB_PLLTYPE_1) ||
 809                     (plltype == SSB_PLLTYPE_3))
 810                         m2 += SSB_CHIPCO_CLK_F5_BIAS;
 811                 else
 812                         m2 = clkfactor_f6_resolve(m2);
 813                 m3 = clkfactor_f6_resolve(m3);
 814
 815                 switch (mc) {
 816                 case SSB_CHIPCO_CLK_MC_BYPASS:
 817                         return clock;
 818                 case SSB_CHIPCO_CLK_MC_M1:
 819                         return (clock / m1);
 820                 case SSB_CHIPCO_CLK_MC_M1M2:
 821                         return (clock / (m1 * m2));
 822                 case SSB_CHIPCO_CLK_MC_M1M2M3:
 823                         return (clock / (m1 * m2 * m3));
 824                 case SSB_CHIPCO_CLK_MC_M1M3:
 825                         return (clock / (m1 * m3));
 826                 }
 827                 return 0;
 828         case SSB_PLLTYPE_2:
 829                 m1 += SSB_CHIPCO_CLK_T2_BIAS;
 830                 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 831                 m3 += SSB_CHIPCO_CLK_T2_BIAS;
 832                 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
 833                 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
 834                 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 835
 836                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 837                         clock /= m1;
 838                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
 839                         clock /= m2;
 840                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
 841                         clock /= m3;
 842                 return clock;
 843         default:
 844                 SSB_WARN_ON(1);
 845         }
 846         return 0;
 847 }
 848
 849 /* Get the current speed the backplane is running at */
 850 u32 ssb_clockspeed(struct ssb_bus *bus)
 851 {
 852         u32 rate;
 853         u32 plltype;
 854         u32 clkctl_n, clkctl_m;
 855
 856         if (ssb_extif_available(&bus->extif))
 857                 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
 858                                            &clkctl_n, &clkctl_m);
 859         else if (bus->chipco.dev)
 860                 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 861                                             &clkctl_n, &clkctl_m);
 862         else
 863                 return 0;
 864
 865         if (bus->chip_id == 0x5365) {
 866                 rate = 100000000;
 867         } else {
 868                 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
 869                 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
 870                         rate /= 2;
 871         }
 872
 873         return rate;
 874 }
 875 EXPORT_SYMBOL(ssb_clockspeed);
 876
 877 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 878 {
 879         u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
 880
 881         /* The REJECT bit changed position in TMSLOW between
 882          * Backplane revisions. */
 883         switch (rev) {
 884         case SSB_IDLOW_SSBREV_22:
 885                 return SSB_TMSLOW_REJECT_22;
 886         case SSB_IDLOW_SSBREV_23:
 887                 return SSB_TMSLOW_REJECT_23;
 888         case SSB_IDLOW_SSBREV_24:     /* TODO - find the proper REJECT bits */
 889         case SSB_IDLOW_SSBREV_25:     /* same here */
 890         case SSB_IDLOW_SSBREV_26:     /* same here */
 891         case SSB_IDLOW_SSBREV_27:     /* same here */
 892                 return SSB_TMSLOW_REJECT_23;    /* this is a guess */
 893         default:
 894                 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
 895                 WARN_ON(1);
 896         }
 897         return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
 898 }
 899
 900 int ssb_device_is_enabled(struct ssb_device *dev)
 901 {
 902         u32 val;
 903         u32 reject;
 904
 905         reject = ssb_tmslow_reject_bitmask(dev);
 906         val = ssb_read32(dev, SSB_TMSLOW);
 907         val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 908
 909         return (val == SSB_TMSLOW_CLOCK);
 910 }
 911 EXPORT_SYMBOL(ssb_device_is_enabled);
 912
 913 static void ssb_flush_tmslow(struct ssb_device *dev)
 914 {
 915         /* Make _really_ sure the device has finished the TMSLOW
 916          * register write transaction, as we risk running into
 917          * a machine check exception otherwise.
 918          * Do this by reading the register back to commit the
 919          * PCI write and delay an additional usec for the device
 920          * to react to the change. */
 921         ssb_read32(dev, SSB_TMSLOW);
 922         udelay(1);
 923 }
 924
 925 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 926 {
 927         u32 val;
 928
 929         ssb_device_disable(dev, core_specific_flags);
 930         ssb_write32(dev, SSB_TMSLOW,
 931                     SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
 932                     SSB_TMSLOW_FGC | core_specific_flags);
 933         ssb_flush_tmslow(dev);
 934
 935         /* Clear SERR if set. This is a hw bug workaround. */
 936         if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
 937                 ssb_write32(dev, SSB_TMSHIGH, 0);
 938
 939         val = ssb_read32(dev, SSB_IMSTATE);
 940         if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
 941                 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
 942                 ssb_write32(dev, SSB_IMSTATE, val);
 943         }
 944
 945         ssb_write32(dev, SSB_TMSLOW,
 946                     SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
 947                     core_specific_flags);
 948         ssb_flush_tmslow(dev);
 949
 950         ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
 951                     core_specific_flags);
 952         ssb_flush_tmslow(dev);
 953 }
 954 EXPORT_SYMBOL(ssb_device_enable);
 955
 956 /* Wait for a bit in a register to get set or unset.
 957  * timeout is in units of ten-microseconds */
 958 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 959                         int timeout, int set)
 960 {
 961         int i;
 962         u32 val;
 963
 964         for (i = 0; i < timeout; i++) {
 965                 val = ssb_read32(dev, reg);
 966                 if (set) {
 967                         if (val & bitmask)
 968                                 return 0;
 969                 } else {
 970                         if (!(val & bitmask))
 971                                 return 0;
 972                 }
 973                 udelay(10);
 974         }
 975         printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
 976                             "register %04X to %s.\n",
 977                bitmask, reg, (set ? "set" : "clear"));
 978
 979         return -ETIMEDOUT;
 980 }
 981
 982 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 983 {
 984         u32 reject;
 985
 986         if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 987                 return;
 988
 989         reject = ssb_tmslow_reject_bitmask(dev);
 990         ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
 991         ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
 992         ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
 993         ssb_write32(dev, SSB_TMSLOW,
 994                     SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 995                     reject | SSB_TMSLOW_RESET |
 996                     core_specific_flags);
 997         ssb_flush_tmslow(dev);
 998
 999         ssb_write32(dev, SSB_TMSLOW,
1000                     reject | SSB_TMSLOW_RESET |
1001                     core_specific_flags);
1002         ssb_flush_tmslow(dev);
1003 }
1004 EXPORT_SYMBOL(ssb_device_disable);
1005
1006 u32 ssb_dma_translation(struct ssb_device *dev)
1007 {
1008         switch (dev->bus->bustype) {
1009         case SSB_BUSTYPE_SSB:
1010                 return 0;
1011         case SSB_BUSTYPE_PCI:
1012         case SSB_BUSTYPE_PCMCIA:
1013                 return SSB_PCI_DMA;
1014         }
1015         return 0;
1016 }
1017 EXPORT_SYMBOL(ssb_dma_translation);
1018
1019 int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
1020 {
1021         struct device *dev = ssb_dev->dev;
1022
1023 #ifdef CONFIG_SSB_PCIHOST
1024         if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
1025             !dma_supported(dev, mask))
1026                 return -EIO;
1027 #endif
1028         dev->coherent_dma_mask = mask;
1029         dev->dma_mask = &dev->coherent_dma_mask;
1030
1031         return 0;
1032 }
1033 EXPORT_SYMBOL(ssb_dma_set_mask);
1034
1035 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1036 {
1037         struct ssb_chipcommon *cc;
1038         int err = 0;
1039
1040         /* On buses where more than one core may be working
1041          * at a time, we must not powerdown stuff if there are
1042          * still cores that may want to run. */
1043         if (bus->bustype == SSB_BUSTYPE_SSB)
1044                 goto out;
1045
1046         cc = &bus->chipco;
1047
1048         if (!cc->dev)
1049                 goto out;
1050         if (cc->dev->id.revision < 5)
1051                 goto out;
1052
1053         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1054         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1055         if (err)
1056                 goto error;
1057 out:
1058 #ifdef CONFIG_SSB_DEBUG
1059         bus->powered_up = 0;
1060 #endif
1061         return err;
1062 error:
1063         ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1064         goto out;
1065 }
1066 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1067
1068 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1069 {
1070         struct ssb_chipcommon *cc;
1071         int err;
1072         enum ssb_clkmode mode;
1073
1074         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1075         if (err)
1076                 goto error;
1077         cc = &bus->chipco;
1078         mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1079         ssb_chipco_set_clockmode(cc, mode);
1080
1081 #ifdef CONFIG_SSB_DEBUG
1082         bus->powered_up = 1;
1083 #endif
1084         return 0;
1085 error:
1086         ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1087         return err;
1088 }
1089 EXPORT_SYMBOL(ssb_bus_powerup);
1090
1091 u32 ssb_admatch_base(u32 adm)
1092 {
1093         u32 base = 0;
1094
1095         switch (adm & SSB_ADM_TYPE) {
1096         case SSB_ADM_TYPE0:
1097                 base = (adm & SSB_ADM_BASE0);
1098                 break;
1099         case SSB_ADM_TYPE1:
1100                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1101                 base = (adm & SSB_ADM_BASE1);
1102                 break;
1103         case SSB_ADM_TYPE2:
1104                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1105                 base = (adm & SSB_ADM_BASE2);
1106                 break;
1107         default:
1108                 SSB_WARN_ON(1);
1109         }
1110
1111         return base;
1112 }
1113 EXPORT_SYMBOL(ssb_admatch_base);
1114
1115 u32 ssb_admatch_size(u32 adm)
1116 {
1117         u32 size = 0;
1118
1119         switch (adm & SSB_ADM_TYPE) {
1120         case SSB_ADM_TYPE0:
1121                 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1122                 break;
1123         case SSB_ADM_TYPE1:
1124                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1125                 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1126                 break;
1127         case SSB_ADM_TYPE2:
1128                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1129                 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1130                 break;
1131         default:
1132                 SSB_WARN_ON(1);
1133         }
1134         size = (1 << (size + 1));
1135
1136         return size;
1137 }
1138 EXPORT_SYMBOL(ssb_admatch_size);
1139
1140 static int __init ssb_modinit(void)
1141 {
1142         int err;
1143
1144         /* See the comment at the ssb_is_early_boot definition */
1145         ssb_is_early_boot = 0;
1146         err = bus_register(&ssb_bustype);
1147         if (err)
1148                 return err;
1149
1150         /* Maybe we already registered some buses at early boot.
1151          * Check for this and attach them
1152          */
1153         ssb_buses_lock();
1154         err = ssb_attach_queued_buses();
1155         ssb_buses_unlock();
1156         if (err)
1157                 bus_unregister(&ssb_bustype);
1158
1159         err = b43_pci_ssb_bridge_init();
1160         if (err) {
1161                 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1162                            "initialization failed");
1163                 /* don't fail SSB init because of this */
1164                 err = 0;
1165         }
1166
1167         return err;
1168 }
1169 /* ssb must be initialized after PCI but before the ssb drivers.
1170  * That means we must use some initcall between subsys_initcall
1171  * and device_initcall. */
1172 fs_initcall(ssb_modinit);
1173
1174 static void __exit ssb_modexit(void)
1175 {
1176         b43_pci_ssb_bridge_exit();
1177         bus_unregister(&ssb_bustype);
1178 }
1179 module_exit(ssb_modexit)