SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/ssb/driver_chipcommon.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Broadcom ChipCommon core driver
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include <linux/ssb/ssb.h>
  12 #include <linux/ssb/ssb_regs.h>
  13 #include <linux/pci.h>
  14
  15 #include "ssb_private.h"
  16
  17
  18 /* Clock sources */
  19 enum ssb_clksrc {
  20         /* PCI clock */
  21         SSB_CHIPCO_CLKSRC_PCI,
  22         /* Crystal slow clock oscillator */
  23         SSB_CHIPCO_CLKSRC_XTALOS,
  24         /* Low power oscillator */
  25         SSB_CHIPCO_CLKSRC_LOPWROS,
  26 };
  27
  28
  29 static inline u32 chipco_read32(struct ssb_chipcommon *cc,
  30                                 u16 offset)
  31 {
  32         return ssb_read32(cc->dev, offset);
  33 }
  34
  35 static inline void chipco_write32(struct ssb_chipcommon *cc,
  36                                   u16 offset,
  37                                   u32 value)
  38 {
  39         ssb_write32(cc->dev, offset, value);
  40 }
  41
  42 static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
  43                                          u32 mask, u32 value)
  44 {
  45         value &= mask;
  46         value |= chipco_read32(cc, offset) & ~mask;
  47         chipco_write32(cc, offset, value);
  48 }
  49
  50 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  51                               enum ssb_clkmode mode)
  52 {
  53         struct ssb_device *ccdev = cc->dev;
  54         struct ssb_bus *bus;
  55         u32 tmp;
  56
  57         if (!ccdev)
  58                 return;
  59         bus = ccdev->bus;
  60         /* chipcommon cores prior to rev6 don't support dynamic clock control */
  61         if (ccdev->id.revision < 6)
  62                 return;
  63         /* chipcommon cores rev10 are a whole new ball game */
  64         if (ccdev->id.revision >= 10)
  65                 return;
  66         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
  67                 return;
  68
  69         switch (mode) {
  70         case SSB_CLKMODE_SLOW:
  71                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  72                 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  73                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
  74                 break;
  75         case SSB_CLKMODE_FAST:
  76                 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
  77                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  78                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  79                 tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
  80                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
  81                 break;
  82         case SSB_CLKMODE_DYNAMIC:
  83                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  84                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  85                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
  86                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
  87                 if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
  88                         tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
  89                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
  90
  91                 /* for dynamic control, we have to release our xtal_pu "force on" */
  92                 if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
  93                         ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
  94                 break;
  95         default:
  96                 SSB_WARN_ON(1);
  97         }
  98 }
  99
 100 /* Get the Slow Clock Source */
 101 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 102 {
 103         struct ssb_bus *bus = cc->dev->bus;
 104         u32 uninitialized_var(tmp);
 105
 106         if (cc->dev->id.revision < 6) {
 107                 if (bus->bustype == SSB_BUSTYPE_SSB ||
 108                     bus->bustype == SSB_BUSTYPE_PCMCIA)
 109                         return SSB_CHIPCO_CLKSRC_XTALOS;
 110                 if (bus->bustype == SSB_BUSTYPE_PCI) {
 111                         pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
 112                         if (tmp & 0x10)
 113                                 return SSB_CHIPCO_CLKSRC_PCI;
 114                         return SSB_CHIPCO_CLKSRC_XTALOS;
 115                 }
 116         }
 117         if (cc->dev->id.revision < 10) {
 118                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 119                 tmp &= 0x7;
 120                 if (tmp == 0)
 121                         return SSB_CHIPCO_CLKSRC_LOPWROS;
 122                 if (tmp == 1)
 123                         return SSB_CHIPCO_CLKSRC_XTALOS;
 124                 if (tmp == 2)
 125                         return SSB_CHIPCO_CLKSRC_PCI;
 126         }
 127
 128         return SSB_CHIPCO_CLKSRC_XTALOS;
 129 }
 130
 131 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
 132 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 133 {
 134         int uninitialized_var(limit);
 135         enum ssb_clksrc clocksrc;
 136         int divisor = 1;
 137         u32 tmp;
 138
 139         clocksrc = chipco_pctl_get_slowclksrc(cc);
 140         if (cc->dev->id.revision < 6) {
 141                 switch (clocksrc) {
 142                 case SSB_CHIPCO_CLKSRC_PCI:
 143                         divisor = 64;
 144                         break;
 145                 case SSB_CHIPCO_CLKSRC_XTALOS:
 146                         divisor = 32;
 147                         break;
 148                 default:
 149                         SSB_WARN_ON(1);
 150                 }
 151         } else if (cc->dev->id.revision < 10) {
 152                 switch (clocksrc) {
 153                 case SSB_CHIPCO_CLKSRC_LOPWROS:
 154                         break;
 155                 case SSB_CHIPCO_CLKSRC_XTALOS:
 156                 case SSB_CHIPCO_CLKSRC_PCI:
 157                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 158                         divisor = (tmp >> 16) + 1;
 159                         divisor *= 4;
 160                         break;
 161                 }
 162         } else {
 163                 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
 164                 divisor = (tmp >> 16) + 1;
 165                 divisor *= 4;
 166         }
 167
 168         switch (clocksrc) {
 169         case SSB_CHIPCO_CLKSRC_LOPWROS:
 170                 if (get_max)
 171                         limit = 43000;
 172                 else
 173                         limit = 25000;
 174                 break;
 175         case SSB_CHIPCO_CLKSRC_XTALOS:
 176                 if (get_max)
 177                         limit = 20200000;
 178                 else
 179                         limit = 19800000;
 180                 break;
 181         case SSB_CHIPCO_CLKSRC_PCI:
 182                 if (get_max)
 183                         limit = 34000000;
 184                 else
 185                         limit = 25000000;
 186                 break;
 187         }
 188         limit /= divisor;
 189
 190         return limit;
 191 }
 192
 193 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
 194 {
 195         struct ssb_bus *bus = cc->dev->bus;
 196
 197         if (bus->chip_id == 0x4321) {
 198                 if (bus->chip_rev == 0)
 199                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
 200                 else if (bus->chip_rev == 1)
 201                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
 202         }
 203
 204         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 205                 return;
 206
 207         if (cc->dev->id.revision >= 10) {
 208                 /* Set Idle Power clock rate to 1Mhz */
 209                 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
 210                                (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
 211                                 0x0000FFFF) | 0x00040000);
 212         } else {
 213                 int maxfreq;
 214
 215                 maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
 216                 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
 217                                (maxfreq * 150 + 999999) / 1000000);
 218                 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
 219                                (maxfreq * 15 + 999999) / 1000000);
 220         }
 221 }
 222
 223 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
 224 {
 225         struct ssb_bus *bus = cc->dev->bus;
 226         int minfreq;
 227         unsigned int tmp;
 228         u32 pll_on_delay;
 229
 230         if (bus->bustype != SSB_BUSTYPE_PCI)
 231                 return;
 232         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 233                 return;
 234
 235         minfreq = chipco_pctl_clockfreqlimit(cc, 0);
 236         pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
 237         tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
 238         SSB_WARN_ON(tmp & ~0xFFFF);
 239
 240         cc->fast_pwrup_delay = tmp;
 241 }
 242
 243 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 244 {
 245         if (!cc->dev)
 246                 return; /* We don't have a ChipCommon */
 247         chipco_powercontrol_init(cc);
 248         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 249         calc_fast_powerup_delay(cc);
 250 }
 251
 252 void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state)
 253 {
 254         if (!cc->dev)
 255                 return;
 256         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
 257 }
 258
 259 void ssb_chipco_resume(struct ssb_chipcommon *cc)
 260 {
 261         if (!cc->dev)
 262                 return;
 263         chipco_powercontrol_init(cc);
 264         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 265 }
 266
 267 /* Get the processor clock */
 268 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
 269                              u32 *plltype, u32 *n, u32 *m)
 270 {
 271         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 272         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 273         switch (*plltype) {
 274         case SSB_PLLTYPE_2:
 275         case SSB_PLLTYPE_4:
 276         case SSB_PLLTYPE_6:
 277         case SSB_PLLTYPE_7:
 278                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 279                 break;
 280         case SSB_PLLTYPE_3:
 281                 /* 5350 uses m2 to control mips */
 282                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 283                 break;
 284         default:
 285                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 286                 break;
 287         }
 288 }
 289
 290 /* Get the bus clock */
 291 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
 292                                  u32 *plltype, u32 *n, u32 *m)
 293 {
 294         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 295         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 296         switch (*plltype) {
 297         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 298                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 299                 break;
 300         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 301                 if (cc->dev->bus->chip_id != 0x5365) {
 302                         *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 303                         break;
 304                 }
 305                 /* Fallthough */
 306         default:
 307                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 308         }
 309 }
 310
 311 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 312                             unsigned long ns)
 313 {
 314         struct ssb_device *dev = cc->dev;
 315         struct ssb_bus *bus = dev->bus;
 316         u32 tmp;
 317
 318         /* set register for external IO to control LED. */
 319         chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
 320         tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;            /* Waitcount-3 = 10ns */
 321         tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;   /* Waitcount-1 = 40ns */
 322         tmp |= DIV_ROUND_UP(240, ns);                           /* Waitcount-0 = 240ns */
 323         chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);       /* 0x01020a0c for a 100Mhz clock */
 324
 325         /* Set timing for the flash */
 326         tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;   /* Waitcount-3 = 10nS */
 327         tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;  /* Waitcount-1 = 10nS */
 328         tmp |= DIV_ROUND_UP(120, ns);                           /* Waitcount-0 = 120nS */
 329         if ((bus->chip_id == 0x5365) ||
 330             (dev->id.revision < 9))
 331                 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
 332         if ((bus->chip_id == 0x5365) ||
 333             (dev->id.revision < 9) ||
 334             ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
 335                 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
 336
 337         if (bus->chip_id == 0x5350) {
 338                 /* Enable EXTIF */
 339                 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;      /* Waitcount-3 = 10ns */
 340                 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
 341                 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
 342                 tmp |= DIV_ROUND_UP(120, ns);                     /* Waitcount-0 = 120ns */
 343                 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
 344         }
 345 }
 346
 347 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
 348 void
 349 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
 350 {
 351         /* instant NMI */
 352         chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
 353 }
 354
 355 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
 356 {
 357         return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
 358 }
 359
 360 void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
 361 {
 362         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
 363 }
 364
 365 void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
 366 {
 367         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
 368 }
 369
 370 #ifdef CONFIG_SSB_SERIAL
 371 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 372                            struct ssb_serial_port *ports)
 373 {
 374         struct ssb_bus *bus = cc->dev->bus;
 375         int nr_ports = 0;
 376         u32 plltype;
 377         unsigned int irq;
 378         u32 baud_base, div;
 379         u32 i, n;
 380
 381         plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 382         irq = ssb_mips_irq(cc->dev);
 383
 384         if (plltype == SSB_PLLTYPE_1) {
 385                 /* PLL clock */
 386                 baud_base = ssb_calc_clock_rate(plltype,
 387                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
 388                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
 389                 div = 1;
 390         } else {
 391                 if (cc->dev->id.revision >= 11) {
 392                         /* Fixed ALP clock */
 393                         baud_base = 20000000;
 394                         div = 1;
 395                         /* Set the override bit so we don't divide it */
 396                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
 397                                        SSB_CHIPCO_CORECTL_UARTCLK0);
 398                 } else if (cc->dev->id.revision >= 3) {
 399                         /* Internal backplane clock */
 400                         baud_base = ssb_clockspeed(bus);
 401                         div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
 402                               & SSB_CHIPCO_CLKDIV_UART;
 403                 } else {
 404                         /* Fixed internal backplane clock */
 405                         baud_base = 88000000;
 406                         div = 48;
 407                 }
 408
 409                 /* Clock source depends on strapping if UartClkOverride is unset */
 410                 if ((cc->dev->id.revision > 0) &&
 411                     !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
 412                         if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
 413                             SSB_CHIPCO_CAP_UARTCLK_INT) {
 414                                 /* Internal divided backplane clock */
 415                                 baud_base /= div;
 416                         } else {
 417                                 /* Assume external clock of 1.8432 MHz */
 418                                 baud_base = 1843200;
 419                         }
 420                 }
 421         }
 422
 423         /* Determine the registers of the UARTs */
 424         n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
 425         for (i = 0; i < n; i++) {
 426                 void __iomem *cc_mmio;
 427                 void __iomem *uart_regs;
 428
 429                 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
 430                 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
 431                 /* Offset changed at after rev 0 */
 432                 if (cc->dev->id.revision == 0)
 433                         uart_regs += (i * 8);
 434                 else
 435                         uart_regs += (i * 256);
 436
 437                 nr_ports++;
 438                 ports[i].regs = uart_regs;
 439                 ports[i].irq = irq;
 440                 ports[i].baud_base = baud_base;
 441                 ports[i].reg_shift = 0;
 442         }
 443
 444         return nr_ports;
 445 }
 446 #endif /* CONFIG_SSB_SERIAL */