WorkStruct: make allyesconfig
[safe/jmp/linux-2.6] / drivers / scsi / ipr.c
1 /*
2  * ipr.c -- driver for IBM Power Linux RAID adapters
3  *
4  * Written By: Brian King <brking@us.ibm.com>, IBM Corporation
5  *
6  * Copyright (C) 2003, 2004 IBM Corporation
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
21  *
22  */
23
24 /*
25  * Notes:
26  *
27  * This driver is used to control the following SCSI adapters:
28  *
29  * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B
30  *
31  * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter
32  *              PCI-X Dual Channel Ultra 320 SCSI Adapter
33  *              PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card
34  *              Embedded SCSI adapter on p615 and p655 systems
35  *
36  * Supported Hardware Features:
37  *      - Ultra 320 SCSI controller
38  *      - PCI-X host interface
39  *      - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine
40  *      - Non-Volatile Write Cache
41  *      - Supports attachment of non-RAID disks, tape, and optical devices
42  *      - RAID Levels 0, 5, 10
43  *      - Hot spare
44  *      - Background Parity Checking
45  *      - Background Data Scrubbing
46  *      - Ability to increase the capacity of an existing RAID 5 disk array
47  *              by adding disks
48  *
49  * Driver Features:
50  *      - Tagged command queuing
51  *      - Adapter microcode download
52  *      - PCI hot plug
53  *      - SCSI device hot plug
54  *
55  */
56
57 #include <linux/fs.h>
58 #include <linux/init.h>
59 #include <linux/types.h>
60 #include <linux/errno.h>
61 #include <linux/kernel.h>
62 #include <linux/ioport.h>
63 #include <linux/delay.h>
64 #include <linux/pci.h>
65 #include <linux/wait.h>
66 #include <linux/spinlock.h>
67 #include <linux/sched.h>
68 #include <linux/interrupt.h>
69 #include <linux/blkdev.h>
70 #include <linux/firmware.h>
71 #include <linux/module.h>
72 #include <linux/moduleparam.h>
73 #include <linux/libata.h>
74 #include <asm/io.h>
75 #include <asm/irq.h>
76 #include <asm/processor.h>
77 #include <scsi/scsi.h>
78 #include <scsi/scsi_host.h>
79 #include <scsi/scsi_tcq.h>
80 #include <scsi/scsi_eh.h>
81 #include <scsi/scsi_cmnd.h>
82 #include <scsi/scsi_transport.h>
83 #include "ipr.h"
84
85 /*
86  *   Global Data
87  */
88 static struct list_head ipr_ioa_head = LIST_HEAD_INIT(ipr_ioa_head);
89 static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
90 static unsigned int ipr_max_speed = 1;
91 static int ipr_testmode = 0;
92 static unsigned int ipr_fastfail = 0;
93 static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT;
94 static unsigned int ipr_enable_cache = 1;
95 static unsigned int ipr_debug = 0;
96 static int ipr_auto_create = 1;
97 static DEFINE_SPINLOCK(ipr_driver_lock);
98
99 /* This table describes the differences between DMA controller chips */
100 static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
101         { /* Gemstone, Citrine, and Obsidian */
102                 .mailbox = 0x0042C,
103                 .cache_line_size = 0x20,
104                 {
105                         .set_interrupt_mask_reg = 0x0022C,
106                         .clr_interrupt_mask_reg = 0x00230,
107                         .sense_interrupt_mask_reg = 0x0022C,
108                         .clr_interrupt_reg = 0x00228,
109                         .sense_interrupt_reg = 0x00224,
110                         .ioarrin_reg = 0x00404,
111                         .sense_uproc_interrupt_reg = 0x00214,
112                         .set_uproc_interrupt_reg = 0x00214,
113                         .clr_uproc_interrupt_reg = 0x00218
114                 }
115         },
116         { /* Snipe and Scamp */
117                 .mailbox = 0x0052C,
118                 .cache_line_size = 0x20,
119                 {
120                         .set_interrupt_mask_reg = 0x00288,
121                         .clr_interrupt_mask_reg = 0x0028C,
122                         .sense_interrupt_mask_reg = 0x00288,
123                         .clr_interrupt_reg = 0x00284,
124                         .sense_interrupt_reg = 0x00280,
125                         .ioarrin_reg = 0x00504,
126                         .sense_uproc_interrupt_reg = 0x00290,
127                         .set_uproc_interrupt_reg = 0x00290,
128                         .clr_uproc_interrupt_reg = 0x00294
129                 }
130         },
131 };
132
133 static const struct ipr_chip_t ipr_chip[] = {
134         { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] },
135         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] },
136         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, &ipr_chip_cfg[0] },
137         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, &ipr_chip_cfg[0] },
138         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] },
139         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] }
140 };
141
142 static int ipr_max_bus_speeds [] = {
143         IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE
144 };
145
146 MODULE_AUTHOR("Brian King <brking@us.ibm.com>");
147 MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver");
148 module_param_named(max_speed, ipr_max_speed, uint, 0);
149 MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
150 module_param_named(log_level, ipr_log_level, uint, 0);
151 MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
152 module_param_named(testmode, ipr_testmode, int, 0);
153 MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
154 module_param_named(fastfail, ipr_fastfail, int, 0);
155 MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
156 module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
157 MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
158 module_param_named(enable_cache, ipr_enable_cache, int, 0);
159 MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
160 module_param_named(debug, ipr_debug, int, 0);
161 MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
162 module_param_named(auto_create, ipr_auto_create, int, 0);
163 MODULE_PARM_DESC(auto_create, "Auto-create single device RAID 0 arrays when initialized (default: 1)");
164 MODULE_LICENSE("GPL");
165 MODULE_VERSION(IPR_DRIVER_VERSION);
166
167 /*  A constant array of IOASCs/URCs/Error Messages */
168 static const
169 struct ipr_error_table_t ipr_error_table[] = {
170         {0x00000000, 1, 1,
171         "8155: An unknown error was received"},
172         {0x00330000, 0, 0,
173         "Soft underlength error"},
174         {0x005A0000, 0, 0,
175         "Command to be cancelled not found"},
176         {0x00808000, 0, 0,
177         "Qualified success"},
178         {0x01080000, 1, 1,
179         "FFFE: Soft device bus error recovered by the IOA"},
180         {0x01088100, 0, 1,
181         "4101: Soft device bus fabric error"},
182         {0x01170600, 0, 1,
183         "FFF9: Device sector reassign successful"},
184         {0x01170900, 0, 1,
185         "FFF7: Media error recovered by device rewrite procedures"},
186         {0x01180200, 0, 1,
187         "7001: IOA sector reassignment successful"},
188         {0x01180500, 0, 1,
189         "FFF9: Soft media error. Sector reassignment recommended"},
190         {0x01180600, 0, 1,
191         "FFF7: Media error recovered by IOA rewrite procedures"},
192         {0x01418000, 0, 1,
193         "FF3D: Soft PCI bus error recovered by the IOA"},
194         {0x01440000, 1, 1,
195         "FFF6: Device hardware error recovered by the IOA"},
196         {0x01448100, 0, 1,
197         "FFF6: Device hardware error recovered by the device"},
198         {0x01448200, 1, 1,
199         "FF3D: Soft IOA error recovered by the IOA"},
200         {0x01448300, 0, 1,
201         "FFFA: Undefined device response recovered by the IOA"},
202         {0x014A0000, 1, 1,
203         "FFF6: Device bus error, message or command phase"},
204         {0x014A8000, 0, 1,
205         "FFFE: Task Management Function failed"},
206         {0x015D0000, 0, 1,
207         "FFF6: Failure prediction threshold exceeded"},
208         {0x015D9200, 0, 1,
209         "8009: Impending cache battery pack failure"},
210         {0x02040400, 0, 0,
211         "34FF: Disk device format in progress"},
212         {0x023F0000, 0, 0,
213         "Synchronization required"},
214         {0x024E0000, 0, 0,
215         "No ready, IOA shutdown"},
216         {0x025A0000, 0, 0,
217         "Not ready, IOA has been shutdown"},
218         {0x02670100, 0, 1,
219         "3020: Storage subsystem configuration error"},
220         {0x03110B00, 0, 0,
221         "FFF5: Medium error, data unreadable, recommend reassign"},
222         {0x03110C00, 0, 0,
223         "7000: Medium error, data unreadable, do not reassign"},
224         {0x03310000, 0, 1,
225         "FFF3: Disk media format bad"},
226         {0x04050000, 0, 1,
227         "3002: Addressed device failed to respond to selection"},
228         {0x04080000, 1, 1,
229         "3100: Device bus error"},
230         {0x04080100, 0, 1,
231         "3109: IOA timed out a device command"},
232         {0x04088000, 0, 0,
233         "3120: SCSI bus is not operational"},
234         {0x04088100, 0, 1,
235         "4100: Hard device bus fabric error"},
236         {0x04118000, 0, 1,
237         "9000: IOA reserved area data check"},
238         {0x04118100, 0, 1,
239         "9001: IOA reserved area invalid data pattern"},
240         {0x04118200, 0, 1,
241         "9002: IOA reserved area LRC error"},
242         {0x04320000, 0, 1,
243         "102E: Out of alternate sectors for disk storage"},
244         {0x04330000, 1, 1,
245         "FFF4: Data transfer underlength error"},
246         {0x04338000, 1, 1,
247         "FFF4: Data transfer overlength error"},
248         {0x043E0100, 0, 1,
249         "3400: Logical unit failure"},
250         {0x04408500, 0, 1,
251         "FFF4: Device microcode is corrupt"},
252         {0x04418000, 1, 1,
253         "8150: PCI bus error"},
254         {0x04430000, 1, 0,
255         "Unsupported device bus message received"},
256         {0x04440000, 1, 1,
257         "FFF4: Disk device problem"},
258         {0x04448200, 1, 1,
259         "8150: Permanent IOA failure"},
260         {0x04448300, 0, 1,
261         "3010: Disk device returned wrong response to IOA"},
262         {0x04448400, 0, 1,
263         "8151: IOA microcode error"},
264         {0x04448500, 0, 0,
265         "Device bus status error"},
266         {0x04448600, 0, 1,
267         "8157: IOA error requiring IOA reset to recover"},
268         {0x04448700, 0, 0,
269         "ATA device status error"},
270         {0x04490000, 0, 0,
271         "Message reject received from the device"},
272         {0x04449200, 0, 1,
273         "8008: A permanent cache battery pack failure occurred"},
274         {0x0444A000, 0, 1,
275         "9090: Disk unit has been modified after the last known status"},
276         {0x0444A200, 0, 1,
277         "9081: IOA detected device error"},
278         {0x0444A300, 0, 1,
279         "9082: IOA detected device error"},
280         {0x044A0000, 1, 1,
281         "3110: Device bus error, message or command phase"},
282         {0x044A8000, 1, 1,
283         "3110: SAS Command / Task Management Function failed"},
284         {0x04670400, 0, 1,
285         "9091: Incorrect hardware configuration change has been detected"},
286         {0x04678000, 0, 1,
287         "9073: Invalid multi-adapter configuration"},
288         {0x04678100, 0, 1,
289         "4010: Incorrect connection between cascaded expanders"},
290         {0x04678200, 0, 1,
291         "4020: Connections exceed IOA design limits"},
292         {0x04678300, 0, 1,
293         "4030: Incorrect multipath connection"},
294         {0x04679000, 0, 1,
295         "4110: Unsupported enclosure function"},
296         {0x046E0000, 0, 1,
297         "FFF4: Command to logical unit failed"},
298         {0x05240000, 1, 0,
299         "Illegal request, invalid request type or request packet"},
300         {0x05250000, 0, 0,
301         "Illegal request, invalid resource handle"},
302         {0x05258000, 0, 0,
303         "Illegal request, commands not allowed to this device"},
304         {0x05258100, 0, 0,
305         "Illegal request, command not allowed to a secondary adapter"},
306         {0x05260000, 0, 0,
307         "Illegal request, invalid field in parameter list"},
308         {0x05260100, 0, 0,
309         "Illegal request, parameter not supported"},
310         {0x05260200, 0, 0,
311         "Illegal request, parameter value invalid"},
312         {0x052C0000, 0, 0,
313         "Illegal request, command sequence error"},
314         {0x052C8000, 1, 0,
315         "Illegal request, dual adapter support not enabled"},
316         {0x06040500, 0, 1,
317         "9031: Array protection temporarily suspended, protection resuming"},
318         {0x06040600, 0, 1,
319         "9040: Array protection temporarily suspended, protection resuming"},
320         {0x06288000, 0, 1,
321         "3140: Device bus not ready to ready transition"},
322         {0x06290000, 0, 1,
323         "FFFB: SCSI bus was reset"},
324         {0x06290500, 0, 0,
325         "FFFE: SCSI bus transition to single ended"},
326         {0x06290600, 0, 0,
327         "FFFE: SCSI bus transition to LVD"},
328         {0x06298000, 0, 1,
329         "FFFB: SCSI bus was reset by another initiator"},
330         {0x063F0300, 0, 1,
331         "3029: A device replacement has occurred"},
332         {0x064C8000, 0, 1,
333         "9051: IOA cache data exists for a missing or failed device"},
334         {0x064C8100, 0, 1,
335         "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
336         {0x06670100, 0, 1,
337         "9025: Disk unit is not supported at its physical location"},
338         {0x06670600, 0, 1,
339         "3020: IOA detected a SCSI bus configuration error"},
340         {0x06678000, 0, 1,
341         "3150: SCSI bus configuration error"},
342         {0x06678100, 0, 1,
343         "9074: Asymmetric advanced function disk configuration"},
344         {0x06678300, 0, 1,
345         "4040: Incomplete multipath connection between IOA and enclosure"},
346         {0x06678400, 0, 1,
347         "4041: Incomplete multipath connection between enclosure and device"},
348         {0x06678500, 0, 1,
349         "9075: Incomplete multipath connection between IOA and remote IOA"},
350         {0x06678600, 0, 1,
351         "9076: Configuration error, missing remote IOA"},
352         {0x06679100, 0, 1,
353         "4050: Enclosure does not support a required multipath function"},
354         {0x06690200, 0, 1,
355         "9041: Array protection temporarily suspended"},
356         {0x06698200, 0, 1,
357         "9042: Corrupt array parity detected on specified device"},
358         {0x066B0200, 0, 1,
359         "9030: Array no longer protected due to missing or failed disk unit"},
360         {0x066B8000, 0, 1,
361         "9071: Link operational transition"},
362         {0x066B8100, 0, 1,
363         "9072: Link not operational transition"},
364         {0x066B8200, 0, 1,
365         "9032: Array exposed but still protected"},
366         {0x066B9100, 0, 1,
367         "4061: Multipath redundancy level got better"},
368         {0x066B9200, 0, 1,
369         "4060: Multipath redundancy level got worse"},
370         {0x07270000, 0, 0,
371         "Failure due to other device"},
372         {0x07278000, 0, 1,
373         "9008: IOA does not support functions expected by devices"},
374         {0x07278100, 0, 1,
375         "9010: Cache data associated with attached devices cannot be found"},
376         {0x07278200, 0, 1,
377         "9011: Cache data belongs to devices other than those attached"},
378         {0x07278400, 0, 1,
379         "9020: Array missing 2 or more devices with only 1 device present"},
380         {0x07278500, 0, 1,
381         "9021: Array missing 2 or more devices with 2 or more devices present"},
382         {0x07278600, 0, 1,
383         "9022: Exposed array is missing a required device"},
384         {0x07278700, 0, 1,
385         "9023: Array member(s) not at required physical locations"},
386         {0x07278800, 0, 1,
387         "9024: Array not functional due to present hardware configuration"},
388         {0x07278900, 0, 1,
389         "9026: Array not functional due to present hardware configuration"},
390         {0x07278A00, 0, 1,
391         "9027: Array is missing a device and parity is out of sync"},
392         {0x07278B00, 0, 1,
393         "9028: Maximum number of arrays already exist"},
394         {0x07278C00, 0, 1,
395         "9050: Required cache data cannot be located for a disk unit"},
396         {0x07278D00, 0, 1,
397         "9052: Cache data exists for a device that has been modified"},
398         {0x07278F00, 0, 1,
399         "9054: IOA resources not available due to previous problems"},
400         {0x07279100, 0, 1,
401         "9092: Disk unit requires initialization before use"},
402         {0x07279200, 0, 1,
403         "9029: Incorrect hardware configuration change has been detected"},
404         {0x07279600, 0, 1,
405         "9060: One or more disk pairs are missing from an array"},
406         {0x07279700, 0, 1,
407         "9061: One or more disks are missing from an array"},
408         {0x07279800, 0, 1,
409         "9062: One or more disks are missing from an array"},
410         {0x07279900, 0, 1,
411         "9063: Maximum number of functional arrays has been exceeded"},
412         {0x0B260000, 0, 0,
413         "Aborted command, invalid descriptor"},
414         {0x0B5A0000, 0, 0,
415         "Command terminated by host"}
416 };
417
418 static const struct ipr_ses_table_entry ipr_ses_table[] = {
419         { "2104-DL1        ", "XXXXXXXXXXXXXXXX", 80 },
420         { "2104-TL1        ", "XXXXXXXXXXXXXXXX", 80 },
421         { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */
422         { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */
423         { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */
424         { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */
425         { "2104-DU3        ", "XXXXXXXXXXXXXXXX", 160 },
426         { "2104-TU3        ", "XXXXXXXXXXXXXXXX", 160 },
427         { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
428         { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
429         { "St  V1S2        ", "XXXXXXXXXXXXXXXX", 160 },
430         { "HSBPD4M  PU3SCSI", "XXXXXXX*XXXXXXXX", 160 },
431         { "VSBPD1H   U3SCSI", "XXXXXXX*XXXXXXXX", 160 }
432 };
433
434 /*
435  *  Function Prototypes
436  */
437 static int ipr_reset_alert(struct ipr_cmnd *);
438 static void ipr_process_ccn(struct ipr_cmnd *);
439 static void ipr_process_error(struct ipr_cmnd *);
440 static void ipr_reset_ioa_job(struct ipr_cmnd *);
441 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *,
442                                    enum ipr_shutdown_type);
443
444 #ifdef CONFIG_SCSI_IPR_TRACE
445 /**
446  * ipr_trc_hook - Add a trace entry to the driver trace
447  * @ipr_cmd:    ipr command struct
448  * @type:               trace type
449  * @add_data:   additional data
450  *
451  * Return value:
452  *      none
453  **/
454 static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd,
455                          u8 type, u32 add_data)
456 {
457         struct ipr_trace_entry *trace_entry;
458         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
459
460         trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++];
461         trace_entry->time = jiffies;
462         trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
463         trace_entry->type = type;
464         trace_entry->ata_op_code = ipr_cmd->ioarcb.add_data.u.regs.command;
465         trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff;
466         trace_entry->res_handle = ipr_cmd->ioarcb.res_handle;
467         trace_entry->u.add_data = add_data;
468 }
469 #else
470 #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0)
471 #endif
472
473 /**
474  * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse
475  * @ipr_cmd:    ipr command struct
476  *
477  * Return value:
478  *      none
479  **/
480 static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
481 {
482         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
483         struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
484
485         memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
486         ioarcb->write_data_transfer_length = 0;
487         ioarcb->read_data_transfer_length = 0;
488         ioarcb->write_ioadl_len = 0;
489         ioarcb->read_ioadl_len = 0;
490         ioasa->ioasc = 0;
491         ioasa->residual_data_len = 0;
492         ioasa->u.gata.status = 0;
493
494         ipr_cmd->scsi_cmd = NULL;
495         ipr_cmd->qc = NULL;
496         ipr_cmd->sense_buffer[0] = 0;
497         ipr_cmd->dma_use_sg = 0;
498 }
499
500 /**
501  * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
502  * @ipr_cmd:    ipr command struct
503  *
504  * Return value:
505  *      none
506  **/
507 static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
508 {
509         ipr_reinit_ipr_cmnd(ipr_cmd);
510         ipr_cmd->u.scratch = 0;
511         ipr_cmd->sibling = NULL;
512         init_timer(&ipr_cmd->timer);
513 }
514
515 /**
516  * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
517  * @ioa_cfg:    ioa config struct
518  *
519  * Return value:
520  *      pointer to ipr command struct
521  **/
522 static
523 struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg)
524 {
525         struct ipr_cmnd *ipr_cmd;
526
527         ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue);
528         list_del(&ipr_cmd->queue);
529         ipr_init_ipr_cmnd(ipr_cmd);
530
531         return ipr_cmd;
532 }
533
534 /**
535  * ipr_unmap_sglist - Unmap scatterlist if mapped
536  * @ioa_cfg:    ioa config struct
537  * @ipr_cmd:    ipr command struct
538  *
539  * Return value:
540  *      nothing
541  **/
542 static void ipr_unmap_sglist(struct ipr_ioa_cfg *ioa_cfg,
543                              struct ipr_cmnd *ipr_cmd)
544 {
545         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
546
547         if (ipr_cmd->dma_use_sg) {
548                 if (scsi_cmd->use_sg > 0) {
549                         pci_unmap_sg(ioa_cfg->pdev, scsi_cmd->request_buffer,
550                                      scsi_cmd->use_sg,
551                                      scsi_cmd->sc_data_direction);
552                 } else {
553                         pci_unmap_single(ioa_cfg->pdev, ipr_cmd->dma_handle,
554                                          scsi_cmd->request_bufflen,
555                                          scsi_cmd->sc_data_direction);
556                 }
557         }
558 }
559
560 /**
561  * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts
562  * @ioa_cfg:    ioa config struct
563  * @clr_ints:     interrupts to clear
564  *
565  * This function masks all interrupts on the adapter, then clears the
566  * interrupts specified in the mask
567  *
568  * Return value:
569  *      none
570  **/
571 static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
572                                           u32 clr_ints)
573 {
574         volatile u32 int_reg;
575
576         /* Stop new interrupts */
577         ioa_cfg->allow_interrupts = 0;
578
579         /* Set interrupt mask to stop all new interrupts */
580         writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
581
582         /* Clear any pending interrupts */
583         writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg);
584         int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
585 }
586
587 /**
588  * ipr_save_pcix_cmd_reg - Save PCI-X command register
589  * @ioa_cfg:    ioa config struct
590  *
591  * Return value:
592  *      0 on success / -EIO on failure
593  **/
594 static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
595 {
596         int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
597
598         if (pcix_cmd_reg == 0) {
599                 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
600                 return -EIO;
601         }
602
603         if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
604                                  &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
605                 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
606                 return -EIO;
607         }
608
609         ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO;
610         return 0;
611 }
612
613 /**
614  * ipr_set_pcix_cmd_reg - Setup PCI-X command register
615  * @ioa_cfg:    ioa config struct
616  *
617  * Return value:
618  *      0 on success / -EIO on failure
619  **/
620 static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
621 {
622         int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
623
624         if (pcix_cmd_reg) {
625                 if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
626                                           ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
627                         dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n");
628                         return -EIO;
629                 }
630         } else {
631                 dev_err(&ioa_cfg->pdev->dev,
632                         "Failed to setup PCI-X command register\n");
633                 return -EIO;
634         }
635
636         return 0;
637 }
638
639 /**
640  * ipr_sata_eh_done - done function for aborted SATA commands
641  * @ipr_cmd:    ipr command struct
642  *
643  * This function is invoked for ops generated to SATA
644  * devices which are being aborted.
645  *
646  * Return value:
647  *      none
648  **/
649 static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd)
650 {
651         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
652         struct ata_queued_cmd *qc = ipr_cmd->qc;
653         struct ipr_sata_port *sata_port = qc->ap->private_data;
654
655         qc->err_mask |= AC_ERR_OTHER;
656         sata_port->ioasa.status |= ATA_BUSY;
657         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
658         ata_qc_complete(qc);
659 }
660
661 /**
662  * ipr_scsi_eh_done - mid-layer done function for aborted ops
663  * @ipr_cmd:    ipr command struct
664  *
665  * This function is invoked by the interrupt handler for
666  * ops generated by the SCSI mid-layer which are being aborted.
667  *
668  * Return value:
669  *      none
670  **/
671 static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd)
672 {
673         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
674         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
675
676         scsi_cmd->result |= (DID_ERROR << 16);
677
678         ipr_unmap_sglist(ioa_cfg, ipr_cmd);
679         scsi_cmd->scsi_done(scsi_cmd);
680         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
681 }
682
683 /**
684  * ipr_fail_all_ops - Fails all outstanding ops.
685  * @ioa_cfg:    ioa config struct
686  *
687  * This function fails all outstanding ops.
688  *
689  * Return value:
690  *      none
691  **/
692 static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg)
693 {
694         struct ipr_cmnd *ipr_cmd, *temp;
695
696         ENTER;
697         list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) {
698                 list_del(&ipr_cmd->queue);
699
700                 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
701                 ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID);
702
703                 if (ipr_cmd->scsi_cmd)
704                         ipr_cmd->done = ipr_scsi_eh_done;
705                 else if (ipr_cmd->qc)
706                         ipr_cmd->done = ipr_sata_eh_done;
707
708                 ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET);
709                 del_timer(&ipr_cmd->timer);
710                 ipr_cmd->done(ipr_cmd);
711         }
712
713         LEAVE;
714 }
715
716 /**
717  * ipr_do_req -  Send driver initiated requests.
718  * @ipr_cmd:            ipr command struct
719  * @done:                       done function
720  * @timeout_func:       timeout function
721  * @timeout:            timeout value
722  *
723  * This function sends the specified command to the adapter with the
724  * timeout given. The done function is invoked on command completion.
725  *
726  * Return value:
727  *      none
728  **/
729 static void ipr_do_req(struct ipr_cmnd *ipr_cmd,
730                        void (*done) (struct ipr_cmnd *),
731                        void (*timeout_func) (struct ipr_cmnd *), u32 timeout)
732 {
733         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
734
735         list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
736
737         ipr_cmd->done = done;
738
739         ipr_cmd->timer.data = (unsigned long) ipr_cmd;
740         ipr_cmd->timer.expires = jiffies + timeout;
741         ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func;
742
743         add_timer(&ipr_cmd->timer);
744
745         ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
746
747         mb();
748         writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
749                ioa_cfg->regs.ioarrin_reg);
750 }
751
752 /**
753  * ipr_internal_cmd_done - Op done function for an internally generated op.
754  * @ipr_cmd:    ipr command struct
755  *
756  * This function is the op done function for an internally generated,
757  * blocking op. It simply wakes the sleeping thread.
758  *
759  * Return value:
760  *      none
761  **/
762 static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd)
763 {
764         if (ipr_cmd->sibling)
765                 ipr_cmd->sibling = NULL;
766         else
767                 complete(&ipr_cmd->completion);
768 }
769
770 /**
771  * ipr_send_blocking_cmd - Send command and sleep on its completion.
772  * @ipr_cmd:    ipr command struct
773  * @timeout_func:       function to invoke if command times out
774  * @timeout:    timeout
775  *
776  * Return value:
777  *      none
778  **/
779 static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd,
780                                   void (*timeout_func) (struct ipr_cmnd *ipr_cmd),
781                                   u32 timeout)
782 {
783         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
784
785         init_completion(&ipr_cmd->completion);
786         ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout);
787
788         spin_unlock_irq(ioa_cfg->host->host_lock);
789         wait_for_completion(&ipr_cmd->completion);
790         spin_lock_irq(ioa_cfg->host->host_lock);
791 }
792
793 /**
794  * ipr_send_hcam - Send an HCAM to the adapter.
795  * @ioa_cfg:    ioa config struct
796  * @type:               HCAM type
797  * @hostrcb:    hostrcb struct
798  *
799  * This function will send a Host Controlled Async command to the adapter.
800  * If HCAMs are currently not allowed to be issued to the adapter, it will
801  * place the hostrcb on the free queue.
802  *
803  * Return value:
804  *      none
805  **/
806 static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
807                           struct ipr_hostrcb *hostrcb)
808 {
809         struct ipr_cmnd *ipr_cmd;
810         struct ipr_ioarcb *ioarcb;
811
812         if (ioa_cfg->allow_cmds) {
813                 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
814                 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
815                 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q);
816
817                 ipr_cmd->u.hostrcb = hostrcb;
818                 ioarcb = &ipr_cmd->ioarcb;
819
820                 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
821                 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM;
822                 ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC;
823                 ioarcb->cmd_pkt.cdb[1] = type;
824                 ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff;
825                 ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff;
826
827                 ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam));
828                 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
829                 ipr_cmd->ioadl[0].flags_and_data_len =
830                         cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam));
831                 ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma);
832
833                 if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE)
834                         ipr_cmd->done = ipr_process_ccn;
835                 else
836                         ipr_cmd->done = ipr_process_error;
837
838                 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
839
840                 mb();
841                 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
842                        ioa_cfg->regs.ioarrin_reg);
843         } else {
844                 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
845         }
846 }
847
848 /**
849  * ipr_init_res_entry - Initialize a resource entry struct.
850  * @res:        resource entry struct
851  *
852  * Return value:
853  *      none
854  **/
855 static void ipr_init_res_entry(struct ipr_resource_entry *res)
856 {
857         res->needs_sync_complete = 0;
858         res->in_erp = 0;
859         res->add_to_ml = 0;
860         res->del_from_ml = 0;
861         res->resetting_device = 0;
862         res->sdev = NULL;
863         res->sata_port = NULL;
864 }
865
866 /**
867  * ipr_handle_config_change - Handle a config change from the adapter
868  * @ioa_cfg:    ioa config struct
869  * @hostrcb:    hostrcb
870  *
871  * Return value:
872  *      none
873  **/
874 static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
875                               struct ipr_hostrcb *hostrcb)
876 {
877         struct ipr_resource_entry *res = NULL;
878         struct ipr_config_table_entry *cfgte;
879         u32 is_ndn = 1;
880
881         cfgte = &hostrcb->hcam.u.ccn.cfgte;
882
883         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
884                 if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr,
885                             sizeof(cfgte->res_addr))) {
886                         is_ndn = 0;
887                         break;
888                 }
889         }
890
891         if (is_ndn) {
892                 if (list_empty(&ioa_cfg->free_res_q)) {
893                         ipr_send_hcam(ioa_cfg,
894                                       IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE,
895                                       hostrcb);
896                         return;
897                 }
898
899                 res = list_entry(ioa_cfg->free_res_q.next,
900                                  struct ipr_resource_entry, queue);
901
902                 list_del(&res->queue);
903                 ipr_init_res_entry(res);
904                 list_add_tail(&res->queue, &ioa_cfg->used_res_q);
905         }
906
907         memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
908
909         if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) {
910                 if (res->sdev) {
911                         res->del_from_ml = 1;
912                         res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
913                         if (ioa_cfg->allow_ml_add_del)
914                                 schedule_work(&ioa_cfg->work_q);
915                 } else
916                         list_move_tail(&res->queue, &ioa_cfg->free_res_q);
917         } else if (!res->sdev) {
918                 res->add_to_ml = 1;
919                 if (ioa_cfg->allow_ml_add_del)
920                         schedule_work(&ioa_cfg->work_q);
921         }
922
923         ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
924 }
925
926 /**
927  * ipr_process_ccn - Op done function for a CCN.
928  * @ipr_cmd:    ipr command struct
929  *
930  * This function is the op done function for a configuration
931  * change notification host controlled async from the adapter.
932  *
933  * Return value:
934  *      none
935  **/
936 static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd)
937 {
938         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
939         struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
940         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
941
942         list_del(&hostrcb->queue);
943         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
944
945         if (ioasc) {
946                 if (ioasc != IPR_IOASC_IOA_WAS_RESET)
947                         dev_err(&ioa_cfg->pdev->dev,
948                                 "Host RCB failed with IOASC: 0x%08X\n", ioasc);
949
950                 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
951         } else {
952                 ipr_handle_config_change(ioa_cfg, hostrcb);
953         }
954 }
955
956 /**
957  * ipr_log_vpd - Log the passed VPD to the error log.
958  * @vpd:                vendor/product id/sn struct
959  *
960  * Return value:
961  *      none
962  **/
963 static void ipr_log_vpd(struct ipr_vpd *vpd)
964 {
965         char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN
966                     + IPR_SERIAL_NUM_LEN];
967
968         memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN);
969         memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id,
970                IPR_PROD_ID_LEN);
971         buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0';
972         ipr_err("Vendor/Product ID: %s\n", buffer);
973
974         memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN);
975         buffer[IPR_SERIAL_NUM_LEN] = '\0';
976         ipr_err("    Serial Number: %s\n", buffer);
977 }
978
979 /**
980  * ipr_log_ext_vpd - Log the passed extended VPD to the error log.
981  * @vpd:                vendor/product id/sn/wwn struct
982  *
983  * Return value:
984  *      none
985  **/
986 static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd)
987 {
988         ipr_log_vpd(&vpd->vpd);
989         ipr_err("    WWN: %08X%08X\n", be32_to_cpu(vpd->wwid[0]),
990                 be32_to_cpu(vpd->wwid[1]));
991 }
992
993 /**
994  * ipr_log_enhanced_cache_error - Log a cache error.
995  * @ioa_cfg:    ioa config struct
996  * @hostrcb:    hostrcb struct
997  *
998  * Return value:
999  *      none
1000  **/
1001 static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg,
1002                                          struct ipr_hostrcb *hostrcb)
1003 {
1004         struct ipr_hostrcb_type_12_error *error =
1005                 &hostrcb->hcam.u.error.u.type_12_error;
1006
1007         ipr_err("-----Current Configuration-----\n");
1008         ipr_err("Cache Directory Card Information:\n");
1009         ipr_log_ext_vpd(&error->ioa_vpd);
1010         ipr_err("Adapter Card Information:\n");
1011         ipr_log_ext_vpd(&error->cfc_vpd);
1012
1013         ipr_err("-----Expected Configuration-----\n");
1014         ipr_err("Cache Directory Card Information:\n");
1015         ipr_log_ext_vpd(&error->ioa_last_attached_to_cfc_vpd);
1016         ipr_err("Adapter Card Information:\n");
1017         ipr_log_ext_vpd(&error->cfc_last_attached_to_ioa_vpd);
1018
1019         ipr_err("Additional IOA Data: %08X %08X %08X\n",
1020                      be32_to_cpu(error->ioa_data[0]),
1021                      be32_to_cpu(error->ioa_data[1]),
1022                      be32_to_cpu(error->ioa_data[2]));
1023 }
1024
1025 /**
1026  * ipr_log_cache_error - Log a cache error.
1027  * @ioa_cfg:    ioa config struct
1028  * @hostrcb:    hostrcb struct
1029  *
1030  * Return value:
1031  *      none
1032  **/
1033 static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg,
1034                                 struct ipr_hostrcb *hostrcb)
1035 {
1036         struct ipr_hostrcb_type_02_error *error =
1037                 &hostrcb->hcam.u.error.u.type_02_error;
1038
1039         ipr_err("-----Current Configuration-----\n");
1040         ipr_err("Cache Directory Card Information:\n");
1041         ipr_log_vpd(&error->ioa_vpd);
1042         ipr_err("Adapter Card Information:\n");
1043         ipr_log_vpd(&error->cfc_vpd);
1044
1045         ipr_err("-----Expected Configuration-----\n");
1046         ipr_err("Cache Directory Card Information:\n");
1047         ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd);
1048         ipr_err("Adapter Card Information:\n");
1049         ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd);
1050
1051         ipr_err("Additional IOA Data: %08X %08X %08X\n",
1052                      be32_to_cpu(error->ioa_data[0]),
1053                      be32_to_cpu(error->ioa_data[1]),
1054                      be32_to_cpu(error->ioa_data[2]));
1055 }
1056
1057 /**
1058  * ipr_log_enhanced_config_error - Log a configuration error.
1059  * @ioa_cfg:    ioa config struct
1060  * @hostrcb:    hostrcb struct
1061  *
1062  * Return value:
1063  *      none
1064  **/
1065 static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg,
1066                                           struct ipr_hostrcb *hostrcb)
1067 {
1068         int errors_logged, i;
1069         struct ipr_hostrcb_device_data_entry_enhanced *dev_entry;
1070         struct ipr_hostrcb_type_13_error *error;
1071
1072         error = &hostrcb->hcam.u.error.u.type_13_error;
1073         errors_logged = be32_to_cpu(error->errors_logged);
1074
1075         ipr_err("Device Errors Detected/Logged: %d/%d\n",
1076                 be32_to_cpu(error->errors_detected), errors_logged);
1077
1078         dev_entry = error->dev;
1079
1080         for (i = 0; i < errors_logged; i++, dev_entry++) {
1081                 ipr_err_separator;
1082
1083                 ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
1084                 ipr_log_ext_vpd(&dev_entry->vpd);
1085
1086                 ipr_err("-----New Device Information-----\n");
1087                 ipr_log_ext_vpd(&dev_entry->new_vpd);
1088
1089                 ipr_err("Cache Directory Card Information:\n");
1090                 ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd);
1091
1092                 ipr_err("Adapter Card Information:\n");
1093                 ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd);
1094         }
1095 }
1096
1097 /**
1098  * ipr_log_config_error - Log a configuration error.
1099  * @ioa_cfg:    ioa config struct
1100  * @hostrcb:    hostrcb struct
1101  *
1102  * Return value:
1103  *      none
1104  **/
1105 static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg,
1106                                  struct ipr_hostrcb *hostrcb)
1107 {
1108         int errors_logged, i;
1109         struct ipr_hostrcb_device_data_entry *dev_entry;
1110         struct ipr_hostrcb_type_03_error *error;
1111
1112         error = &hostrcb->hcam.u.error.u.type_03_error;
1113         errors_logged = be32_to_cpu(error->errors_logged);
1114
1115         ipr_err("Device Errors Detected/Logged: %d/%d\n",
1116                 be32_to_cpu(error->errors_detected), errors_logged);
1117
1118         dev_entry = error->dev;
1119
1120         for (i = 0; i < errors_logged; i++, dev_entry++) {
1121                 ipr_err_separator;
1122
1123                 ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
1124                 ipr_log_vpd(&dev_entry->vpd);
1125
1126                 ipr_err("-----New Device Information-----\n");
1127                 ipr_log_vpd(&dev_entry->new_vpd);
1128
1129                 ipr_err("Cache Directory Card Information:\n");
1130                 ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd);
1131
1132                 ipr_err("Adapter Card Information:\n");
1133                 ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd);
1134
1135                 ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n",
1136                         be32_to_cpu(dev_entry->ioa_data[0]),
1137                         be32_to_cpu(dev_entry->ioa_data[1]),
1138                         be32_to_cpu(dev_entry->ioa_data[2]),
1139                         be32_to_cpu(dev_entry->ioa_data[3]),
1140                         be32_to_cpu(dev_entry->ioa_data[4]));
1141         }
1142 }
1143
1144 /**
1145  * ipr_log_enhanced_array_error - Log an array configuration error.
1146  * @ioa_cfg:    ioa config struct
1147  * @hostrcb:    hostrcb struct
1148  *
1149  * Return value:
1150  *      none
1151  **/
1152 static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg *ioa_cfg,
1153                                          struct ipr_hostrcb *hostrcb)
1154 {
1155         int i, num_entries;
1156         struct ipr_hostrcb_type_14_error *error;
1157         struct ipr_hostrcb_array_data_entry_enhanced *array_entry;
1158         const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
1159
1160         error = &hostrcb->hcam.u.error.u.type_14_error;
1161
1162         ipr_err_separator;
1163
1164         ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1165                 error->protection_level,
1166                 ioa_cfg->host->host_no,
1167                 error->last_func_vset_res_addr.bus,
1168                 error->last_func_vset_res_addr.target,
1169                 error->last_func_vset_res_addr.lun);
1170
1171         ipr_err_separator;
1172
1173         array_entry = error->array_member;
1174         num_entries = min_t(u32, be32_to_cpu(error->num_entries),
1175                             sizeof(error->array_member));
1176
1177         for (i = 0; i < num_entries; i++, array_entry++) {
1178                 if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
1179                         continue;
1180
1181                 if (be32_to_cpu(error->exposed_mode_adn) == i)
1182                         ipr_err("Exposed Array Member %d:\n", i);
1183                 else
1184                         ipr_err("Array Member %d:\n", i);
1185
1186                 ipr_log_ext_vpd(&array_entry->vpd);
1187                 ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
1188                 ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
1189                                  "Expected Location");
1190
1191                 ipr_err_separator;
1192         }
1193 }
1194
1195 /**
1196  * ipr_log_array_error - Log an array configuration error.
1197  * @ioa_cfg:    ioa config struct
1198  * @hostrcb:    hostrcb struct
1199  *
1200  * Return value:
1201  *      none
1202  **/
1203 static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg,
1204                                 struct ipr_hostrcb *hostrcb)
1205 {
1206         int i;
1207         struct ipr_hostrcb_type_04_error *error;
1208         struct ipr_hostrcb_array_data_entry *array_entry;
1209         const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
1210
1211         error = &hostrcb->hcam.u.error.u.type_04_error;
1212
1213         ipr_err_separator;
1214
1215         ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1216                 error->protection_level,
1217                 ioa_cfg->host->host_no,
1218                 error->last_func_vset_res_addr.bus,
1219                 error->last_func_vset_res_addr.target,
1220                 error->last_func_vset_res_addr.lun);
1221
1222         ipr_err_separator;
1223
1224         array_entry = error->array_member;
1225
1226         for (i = 0; i < 18; i++) {
1227                 if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
1228                         continue;
1229
1230                 if (be32_to_cpu(error->exposed_mode_adn) == i)
1231                         ipr_err("Exposed Array Member %d:\n", i);
1232                 else
1233                         ipr_err("Array Member %d:\n", i);
1234
1235                 ipr_log_vpd(&array_entry->vpd);
1236
1237                 ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
1238                 ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
1239                                  "Expected Location");
1240
1241                 ipr_err_separator;
1242
1243                 if (i == 9)
1244                         array_entry = error->array_member2;
1245                 else
1246                         array_entry++;
1247         }
1248 }
1249
1250 /**
1251  * ipr_log_hex_data - Log additional hex IOA error data.
1252  * @data:               IOA error data
1253  * @len:                data length
1254  *
1255  * Return value:
1256  *      none
1257  **/
1258 static void ipr_log_hex_data(u32 *data, int len)
1259 {
1260         int i;
1261
1262         if (len == 0)
1263                 return;
1264
1265         for (i = 0; i < len / 4; i += 4) {
1266                 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
1267                         be32_to_cpu(data[i]),
1268                         be32_to_cpu(data[i+1]),
1269                         be32_to_cpu(data[i+2]),
1270                         be32_to_cpu(data[i+3]));
1271         }
1272 }
1273
1274 /**
1275  * ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error.
1276  * @ioa_cfg:    ioa config struct
1277  * @hostrcb:    hostrcb struct
1278  *
1279  * Return value:
1280  *      none
1281  **/
1282 static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
1283                                             struct ipr_hostrcb *hostrcb)
1284 {
1285         struct ipr_hostrcb_type_17_error *error;
1286
1287         error = &hostrcb->hcam.u.error.u.type_17_error;
1288         error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
1289
1290         ipr_err("%s\n", error->failure_reason);
1291         ipr_err("Remote Adapter VPD:\n");
1292         ipr_log_ext_vpd(&error->vpd);
1293         ipr_log_hex_data(error->data,
1294                          be32_to_cpu(hostrcb->hcam.length) -
1295                          (offsetof(struct ipr_hostrcb_error, u) +
1296                           offsetof(struct ipr_hostrcb_type_17_error, data)));
1297 }
1298
1299 /**
1300  * ipr_log_dual_ioa_error - Log a dual adapter error.
1301  * @ioa_cfg:    ioa config struct
1302  * @hostrcb:    hostrcb struct
1303  *
1304  * Return value:
1305  *      none
1306  **/
1307 static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
1308                                    struct ipr_hostrcb *hostrcb)
1309 {
1310         struct ipr_hostrcb_type_07_error *error;
1311
1312         error = &hostrcb->hcam.u.error.u.type_07_error;
1313         error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
1314
1315         ipr_err("%s\n", error->failure_reason);
1316         ipr_err("Remote Adapter VPD:\n");
1317         ipr_log_vpd(&error->vpd);
1318         ipr_log_hex_data(error->data,
1319                          be32_to_cpu(hostrcb->hcam.length) -
1320                          (offsetof(struct ipr_hostrcb_error, u) +
1321                           offsetof(struct ipr_hostrcb_type_07_error, data)));
1322 }
1323
1324 /**
1325  * ipr_log_generic_error - Log an adapter error.
1326  * @ioa_cfg:    ioa config struct
1327  * @hostrcb:    hostrcb struct
1328  *
1329  * Return value:
1330  *      none
1331  **/
1332 static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg,
1333                                   struct ipr_hostrcb *hostrcb)
1334 {
1335         ipr_log_hex_data(hostrcb->hcam.u.raw.data,
1336                          be32_to_cpu(hostrcb->hcam.length));
1337 }
1338
1339 /**
1340  * ipr_get_error - Find the specfied IOASC in the ipr_error_table.
1341  * @ioasc:      IOASC
1342  *
1343  * This function will return the index of into the ipr_error_table
1344  * for the specified IOASC. If the IOASC is not in the table,
1345  * 0 will be returned, which points to the entry used for unknown errors.
1346  *
1347  * Return value:
1348  *      index into the ipr_error_table
1349  **/
1350 static u32 ipr_get_error(u32 ioasc)
1351 {
1352         int i;
1353
1354         for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++)
1355                 if (ipr_error_table[i].ioasc == (ioasc & IPR_IOASC_IOASC_MASK))
1356                         return i;
1357
1358         return 0;
1359 }
1360
1361 /**
1362  * ipr_handle_log_data - Log an adapter error.
1363  * @ioa_cfg:    ioa config struct
1364  * @hostrcb:    hostrcb struct
1365  *
1366  * This function logs an adapter error to the system.
1367  *
1368  * Return value:
1369  *      none
1370  **/
1371 static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
1372                                 struct ipr_hostrcb *hostrcb)
1373 {
1374         u32 ioasc;
1375         int error_index;
1376
1377         if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY)
1378                 return;
1379
1380         if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST)
1381                 dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n");
1382
1383         ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
1384
1385         if (ioasc == IPR_IOASC_BUS_WAS_RESET ||
1386             ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) {
1387                 /* Tell the midlayer we had a bus reset so it will handle the UA properly */
1388                 scsi_report_bus_reset(ioa_cfg->host,
1389                                       hostrcb->hcam.u.error.failing_dev_res_addr.bus);
1390         }
1391
1392         error_index = ipr_get_error(ioasc);
1393
1394         if (!ipr_error_table[error_index].log_hcam)
1395                 return;
1396
1397         if (ipr_is_device(&hostrcb->hcam.u.error.failing_dev_res_addr)) {
1398                 ipr_ra_err(ioa_cfg, hostrcb->hcam.u.error.failing_dev_res_addr,
1399                            "%s\n", ipr_error_table[error_index].error);
1400         } else {
1401                 dev_err(&ioa_cfg->pdev->dev, "%s\n",
1402                         ipr_error_table[error_index].error);
1403         }
1404
1405         /* Set indication we have logged an error */
1406         ioa_cfg->errors_logged++;
1407
1408         if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
1409                 return;
1410         if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw))
1411                 hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw));
1412
1413         switch (hostrcb->hcam.overlay_id) {
1414         case IPR_HOST_RCB_OVERLAY_ID_2:
1415                 ipr_log_cache_error(ioa_cfg, hostrcb);
1416                 break;
1417         case IPR_HOST_RCB_OVERLAY_ID_3:
1418                 ipr_log_config_error(ioa_cfg, hostrcb);
1419                 break;
1420         case IPR_HOST_RCB_OVERLAY_ID_4:
1421         case IPR_HOST_RCB_OVERLAY_ID_6:
1422                 ipr_log_array_error(ioa_cfg, hostrcb);
1423                 break;
1424         case IPR_HOST_RCB_OVERLAY_ID_7:
1425                 ipr_log_dual_ioa_error(ioa_cfg, hostrcb);
1426                 break;
1427         case IPR_HOST_RCB_OVERLAY_ID_12:
1428                 ipr_log_enhanced_cache_error(ioa_cfg, hostrcb);
1429                 break;
1430         case IPR_HOST_RCB_OVERLAY_ID_13:
1431                 ipr_log_enhanced_config_error(ioa_cfg, hostrcb);
1432                 break;
1433         case IPR_HOST_RCB_OVERLAY_ID_14:
1434         case IPR_HOST_RCB_OVERLAY_ID_16:
1435                 ipr_log_enhanced_array_error(ioa_cfg, hostrcb);
1436                 break;
1437         case IPR_HOST_RCB_OVERLAY_ID_17:
1438                 ipr_log_enhanced_dual_ioa_error(ioa_cfg, hostrcb);
1439                 break;
1440         case IPR_HOST_RCB_OVERLAY_ID_1:
1441         case IPR_HOST_RCB_OVERLAY_ID_DEFAULT:
1442         default:
1443                 ipr_log_generic_error(ioa_cfg, hostrcb);
1444                 break;
1445         }
1446 }
1447
1448 /**
1449  * ipr_process_error - Op done function for an adapter error log.
1450  * @ipr_cmd:    ipr command struct
1451  *
1452  * This function is the op done function for an error log host
1453  * controlled async from the adapter. It will log the error and
1454  * send the HCAM back to the adapter.
1455  *
1456  * Return value:
1457  *      none
1458  **/
1459 static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
1460 {
1461         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1462         struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
1463         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
1464
1465         list_del(&hostrcb->queue);
1466         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
1467
1468         if (!ioasc) {
1469                 ipr_handle_log_data(ioa_cfg, hostrcb);
1470         } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) {
1471                 dev_err(&ioa_cfg->pdev->dev,
1472                         "Host RCB failed with IOASC: 0x%08X\n", ioasc);
1473         }
1474
1475         ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
1476 }
1477
1478 /**
1479  * ipr_timeout -  An internally generated op has timed out.
1480  * @ipr_cmd:    ipr command struct
1481  *
1482  * This function blocks host requests and initiates an
1483  * adapter reset.
1484  *
1485  * Return value:
1486  *      none
1487  **/
1488 static void ipr_timeout(struct ipr_cmnd *ipr_cmd)
1489 {
1490         unsigned long lock_flags = 0;
1491         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1492
1493         ENTER;
1494         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1495
1496         ioa_cfg->errors_logged++;
1497         dev_err(&ioa_cfg->pdev->dev,
1498                 "Adapter being reset due to command timeout.\n");
1499
1500         if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1501                 ioa_cfg->sdt_state = GET_DUMP;
1502
1503         if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd)
1504                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1505
1506         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1507         LEAVE;
1508 }
1509
1510 /**
1511  * ipr_oper_timeout -  Adapter timed out transitioning to operational
1512  * @ipr_cmd:    ipr command struct
1513  *
1514  * This function blocks host requests and initiates an
1515  * adapter reset.
1516  *
1517  * Return value:
1518  *      none
1519  **/
1520 static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd)
1521 {
1522         unsigned long lock_flags = 0;
1523         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1524
1525         ENTER;
1526         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1527
1528         ioa_cfg->errors_logged++;
1529         dev_err(&ioa_cfg->pdev->dev,
1530                 "Adapter timed out transitioning to operational.\n");
1531
1532         if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1533                 ioa_cfg->sdt_state = GET_DUMP;
1534
1535         if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) {
1536                 if (ipr_fastfail)
1537                         ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
1538                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1539         }
1540
1541         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1542         LEAVE;
1543 }
1544
1545 /**
1546  * ipr_reset_reload - Reset/Reload the IOA
1547  * @ioa_cfg:            ioa config struct
1548  * @shutdown_type:      shutdown type
1549  *
1550  * This function resets the adapter and re-initializes it.
1551  * This function assumes that all new host commands have been stopped.
1552  * Return value:
1553  *      SUCCESS / FAILED
1554  **/
1555 static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg,
1556                             enum ipr_shutdown_type shutdown_type)
1557 {
1558         if (!ioa_cfg->in_reset_reload)
1559                 ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
1560
1561         spin_unlock_irq(ioa_cfg->host->host_lock);
1562         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
1563         spin_lock_irq(ioa_cfg->host->host_lock);
1564
1565         /* If we got hit with a host reset while we were already resetting
1566          the adapter for some reason, and the reset failed. */
1567         if (ioa_cfg->ioa_is_dead) {
1568                 ipr_trace;
1569                 return FAILED;
1570         }
1571
1572         return SUCCESS;
1573 }
1574
1575 /**
1576  * ipr_find_ses_entry - Find matching SES in SES table
1577  * @res:        resource entry struct of SES
1578  *
1579  * Return value:
1580  *      pointer to SES table entry / NULL on failure
1581  **/
1582 static const struct ipr_ses_table_entry *
1583 ipr_find_ses_entry(struct ipr_resource_entry *res)
1584 {
1585         int i, j, matches;
1586         const struct ipr_ses_table_entry *ste = ipr_ses_table;
1587
1588         for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) {
1589                 for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) {
1590                         if (ste->compare_product_id_byte[j] == 'X') {
1591                                 if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j])
1592                                         matches++;
1593                                 else
1594                                         break;
1595                         } else
1596                                 matches++;
1597                 }
1598
1599                 if (matches == IPR_PROD_ID_LEN)
1600                         return ste;
1601         }
1602
1603         return NULL;
1604 }
1605
1606 /**
1607  * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus
1608  * @ioa_cfg:    ioa config struct
1609  * @bus:                SCSI bus
1610  * @bus_width:  bus width
1611  *
1612  * Return value:
1613  *      SCSI bus speed in units of 100KHz, 1600 is 160 MHz
1614  *      For a 2-byte wide SCSI bus, the maximum transfer speed is
1615  *      twice the maximum transfer rate (e.g. for a wide enabled bus,
1616  *      max 160MHz = max 320MB/sec).
1617  **/
1618 static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width)
1619 {
1620         struct ipr_resource_entry *res;
1621         const struct ipr_ses_table_entry *ste;
1622         u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width);
1623
1624         /* Loop through each config table entry in the config table buffer */
1625         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
1626                 if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data)))
1627                         continue;
1628
1629                 if (bus != res->cfgte.res_addr.bus)
1630                         continue;
1631
1632                 if (!(ste = ipr_find_ses_entry(res)))
1633                         continue;
1634
1635                 max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8);
1636         }
1637
1638         return max_xfer_rate;
1639 }
1640
1641 /**
1642  * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA
1643  * @ioa_cfg:            ioa config struct
1644  * @max_delay:          max delay in micro-seconds to wait
1645  *
1646  * Waits for an IODEBUG ACK from the IOA, doing busy looping.
1647  *
1648  * Return value:
1649  *      0 on success / other on failure
1650  **/
1651 static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay)
1652 {
1653         volatile u32 pcii_reg;
1654         int delay = 1;
1655
1656         /* Read interrupt reg until IOA signals IO Debug Acknowledge */
1657         while (delay < max_delay) {
1658                 pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
1659
1660                 if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE)
1661                         return 0;
1662
1663                 /* udelay cannot be used if delay is more than a few milliseconds */
1664                 if ((delay / 1000) > MAX_UDELAY_MS)
1665                         mdelay(delay / 1000);
1666                 else
1667                         udelay(delay);
1668
1669                 delay += delay;
1670         }
1671         return -EIO;
1672 }
1673
1674 /**
1675  * ipr_get_ldump_data_section - Dump IOA memory
1676  * @ioa_cfg:                    ioa config struct
1677  * @start_addr:                 adapter address to dump
1678  * @dest:                               destination kernel buffer
1679  * @length_in_words:    length to dump in 4 byte words
1680  *
1681  * Return value:
1682  *      0 on success / -EIO on failure
1683  **/
1684 static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
1685                                       u32 start_addr,
1686                                       __be32 *dest, u32 length_in_words)
1687 {
1688         volatile u32 temp_pcii_reg;
1689         int i, delay = 0;
1690
1691         /* Write IOA interrupt reg starting LDUMP state  */
1692         writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT),
1693                ioa_cfg->regs.set_uproc_interrupt_reg);
1694
1695         /* Wait for IO debug acknowledge */
1696         if (ipr_wait_iodbg_ack(ioa_cfg,
1697                                IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) {
1698                 dev_err(&ioa_cfg->pdev->dev,
1699                         "IOA dump long data transfer timeout\n");
1700                 return -EIO;
1701         }
1702
1703         /* Signal LDUMP interlocked - clear IO debug ack */
1704         writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1705                ioa_cfg->regs.clr_interrupt_reg);
1706
1707         /* Write Mailbox with starting address */
1708         writel(start_addr, ioa_cfg->ioa_mailbox);
1709
1710         /* Signal address valid - clear IOA Reset alert */
1711         writel(IPR_UPROCI_RESET_ALERT,
1712                ioa_cfg->regs.clr_uproc_interrupt_reg);
1713
1714         for (i = 0; i < length_in_words; i++) {
1715                 /* Wait for IO debug acknowledge */
1716                 if (ipr_wait_iodbg_ack(ioa_cfg,
1717                                        IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) {
1718                         dev_err(&ioa_cfg->pdev->dev,
1719                                 "IOA dump short data transfer timeout\n");
1720                         return -EIO;
1721                 }
1722
1723                 /* Read data from mailbox and increment destination pointer */
1724                 *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox));
1725                 dest++;
1726
1727                 /* For all but the last word of data, signal data received */
1728                 if (i < (length_in_words - 1)) {
1729                         /* Signal dump data received - Clear IO debug Ack */
1730                         writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1731                                ioa_cfg->regs.clr_interrupt_reg);
1732                 }
1733         }
1734
1735         /* Signal end of block transfer. Set reset alert then clear IO debug ack */
1736         writel(IPR_UPROCI_RESET_ALERT,
1737                ioa_cfg->regs.set_uproc_interrupt_reg);
1738
1739         writel(IPR_UPROCI_IO_DEBUG_ALERT,
1740                ioa_cfg->regs.clr_uproc_interrupt_reg);
1741
1742         /* Signal dump data received - Clear IO debug Ack */
1743         writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1744                ioa_cfg->regs.clr_interrupt_reg);
1745
1746         /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
1747         while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) {
1748                 temp_pcii_reg =
1749                     readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
1750
1751                 if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT))
1752                         return 0;
1753
1754                 udelay(10);
1755                 delay += 10;
1756         }
1757
1758         return 0;
1759 }
1760
1761 #ifdef CONFIG_SCSI_IPR_DUMP
1762 /**
1763  * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer
1764  * @ioa_cfg:            ioa config struct
1765  * @pci_address:        adapter address
1766  * @length:                     length of data to copy
1767  *
1768  * Copy data from PCI adapter to kernel buffer.
1769  * Note: length MUST be a 4 byte multiple
1770  * Return value:
1771  *      0 on success / other on failure
1772  **/
1773 static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg,
1774                         unsigned long pci_address, u32 length)
1775 {
1776         int bytes_copied = 0;
1777         int cur_len, rc, rem_len, rem_page_len;
1778         __be32 *page;
1779         unsigned long lock_flags = 0;
1780         struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
1781
1782         while (bytes_copied < length &&
1783                (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
1784                 if (ioa_dump->page_offset >= PAGE_SIZE ||
1785                     ioa_dump->page_offset == 0) {
1786                         page = (__be32 *)__get_free_page(GFP_ATOMIC);
1787
1788                         if (!page) {
1789                                 ipr_trace;
1790                                 return bytes_copied;
1791                         }
1792
1793                         ioa_dump->page_offset = 0;
1794                         ioa_dump->ioa_data[ioa_dump->next_page_index] = page;
1795                         ioa_dump->next_page_index++;
1796                 } else
1797                         page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1];
1798
1799                 rem_len = length - bytes_copied;
1800                 rem_page_len = PAGE_SIZE - ioa_dump->page_offset;
1801                 cur_len = min(rem_len, rem_page_len);
1802
1803                 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1804                 if (ioa_cfg->sdt_state == ABORT_DUMP) {
1805                         rc = -EIO;
1806                 } else {
1807                         rc = ipr_get_ldump_data_section(ioa_cfg,
1808                                                         pci_address + bytes_copied,
1809                                                         &page[ioa_dump->page_offset / 4],
1810                                                         (cur_len / sizeof(u32)));
1811                 }
1812                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1813
1814                 if (!rc) {
1815                         ioa_dump->page_offset += cur_len;
1816                         bytes_copied += cur_len;
1817                 } else {
1818                         ipr_trace;
1819                         break;
1820                 }
1821                 schedule();
1822         }
1823
1824         return bytes_copied;
1825 }
1826
1827 /**
1828  * ipr_init_dump_entry_hdr - Initialize a dump entry header.
1829  * @hdr:        dump entry header struct
1830  *
1831  * Return value:
1832  *      nothing
1833  **/
1834 static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr)
1835 {
1836         hdr->eye_catcher = IPR_DUMP_EYE_CATCHER;
1837         hdr->num_elems = 1;
1838         hdr->offset = sizeof(*hdr);
1839         hdr->status = IPR_DUMP_STATUS_SUCCESS;
1840 }
1841
1842 /**
1843  * ipr_dump_ioa_type_data - Fill in the adapter type in the dump.
1844  * @ioa_cfg:    ioa config struct
1845  * @driver_dump:        driver dump struct
1846  *
1847  * Return value:
1848  *      nothing
1849  **/
1850 static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg,
1851                                    struct ipr_driver_dump *driver_dump)
1852 {
1853         struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
1854
1855         ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr);
1856         driver_dump->ioa_type_entry.hdr.len =
1857                 sizeof(struct ipr_dump_ioa_type_entry) -
1858                 sizeof(struct ipr_dump_entry_header);
1859         driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1860         driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID;
1861         driver_dump->ioa_type_entry.type = ioa_cfg->type;
1862         driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) |
1863                 (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) |
1864                 ucode_vpd->minor_release[1];
1865         driver_dump->hdr.num_entries++;
1866 }
1867
1868 /**
1869  * ipr_dump_version_data - Fill in the driver version in the dump.
1870  * @ioa_cfg:    ioa config struct
1871  * @driver_dump:        driver dump struct
1872  *
1873  * Return value:
1874  *      nothing
1875  **/
1876 static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg,
1877                                   struct ipr_driver_dump *driver_dump)
1878 {
1879         ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr);
1880         driver_dump->version_entry.hdr.len =
1881                 sizeof(struct ipr_dump_version_entry) -
1882                 sizeof(struct ipr_dump_entry_header);
1883         driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
1884         driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID;
1885         strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION);
1886         driver_dump->hdr.num_entries++;
1887 }
1888
1889 /**
1890  * ipr_dump_trace_data - Fill in the IOA trace in the dump.
1891  * @ioa_cfg:    ioa config struct
1892  * @driver_dump:        driver dump struct
1893  *
1894  * Return value:
1895  *      nothing
1896  **/
1897 static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg,
1898                                    struct ipr_driver_dump *driver_dump)
1899 {
1900         ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr);
1901         driver_dump->trace_entry.hdr.len =
1902                 sizeof(struct ipr_dump_trace_entry) -
1903                 sizeof(struct ipr_dump_entry_header);
1904         driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1905         driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID;
1906         memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE);
1907         driver_dump->hdr.num_entries++;
1908 }
1909
1910 /**
1911  * ipr_dump_location_data - Fill in the IOA location in the dump.
1912  * @ioa_cfg:    ioa config struct
1913  * @driver_dump:        driver dump struct
1914  *
1915  * Return value:
1916  *      nothing
1917  **/
1918 static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg,
1919                                    struct ipr_driver_dump *driver_dump)
1920 {
1921         ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr);
1922         driver_dump->location_entry.hdr.len =
1923                 sizeof(struct ipr_dump_location_entry) -
1924                 sizeof(struct ipr_dump_entry_header);
1925         driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
1926         driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID;
1927         strcpy(driver_dump->location_entry.location, ioa_cfg->pdev->dev.bus_id);
1928         driver_dump->hdr.num_entries++;
1929 }
1930
1931 /**
1932  * ipr_get_ioa_dump - Perform a dump of the driver and adapter.
1933  * @ioa_cfg:    ioa config struct
1934  * @dump:               dump struct
1935  *
1936  * Return value:
1937  *      nothing
1938  **/
1939 static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
1940 {
1941         unsigned long start_addr, sdt_word;
1942         unsigned long lock_flags = 0;
1943         struct ipr_driver_dump *driver_dump = &dump->driver_dump;
1944         struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
1945         u32 num_entries, start_off, end_off;
1946         u32 bytes_to_copy, bytes_copied, rc;
1947         struct ipr_sdt *sdt;
1948         int i;
1949
1950         ENTER;
1951
1952         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1953
1954         if (ioa_cfg->sdt_state != GET_DUMP) {
1955                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1956                 return;
1957         }
1958
1959         start_addr = readl(ioa_cfg->ioa_mailbox);
1960
1961         if (!ipr_sdt_is_fmt2(start_addr)) {
1962                 dev_err(&ioa_cfg->pdev->dev,
1963                         "Invalid dump table format: %lx\n", start_addr);
1964                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1965                 return;
1966         }
1967
1968         dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n");
1969
1970         driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER;
1971
1972         /* Initialize the overall dump header */
1973         driver_dump->hdr.len = sizeof(struct ipr_driver_dump);
1974         driver_dump->hdr.num_entries = 1;
1975         driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header);
1976         driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS;
1977         driver_dump->hdr.os = IPR_DUMP_OS_LINUX;
1978         driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME;
1979
1980         ipr_dump_version_data(ioa_cfg, driver_dump);
1981         ipr_dump_location_data(ioa_cfg, driver_dump);
1982         ipr_dump_ioa_type_data(ioa_cfg, driver_dump);
1983         ipr_dump_trace_data(ioa_cfg, driver_dump);
1984
1985         /* Update dump_header */
1986         driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header);
1987
1988         /* IOA Dump entry */
1989         ipr_init_dump_entry_hdr(&ioa_dump->hdr);
1990         ioa_dump->format = IPR_SDT_FMT2;
1991         ioa_dump->hdr.len = 0;
1992         ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1993         ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID;
1994
1995         /* First entries in sdt are actually a list of dump addresses and
1996          lengths to gather the real dump data.  sdt represents the pointer
1997          to the ioa generated dump table.  Dump data will be extracted based
1998          on entries in this table */
1999         sdt = &ioa_dump->sdt;
2000
2001         rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
2002                                         sizeof(struct ipr_sdt) / sizeof(__be32));
2003
2004         /* Smart Dump table is ready to use and the first entry is valid */
2005         if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) {
2006                 dev_err(&ioa_cfg->pdev->dev,
2007                         "Dump of IOA failed. Dump table not valid: %d, %X.\n",
2008                         rc, be32_to_cpu(sdt->hdr.state));
2009                 driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED;
2010                 ioa_cfg->sdt_state = DUMP_OBTAINED;
2011                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2012                 return;
2013         }
2014
2015         num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
2016
2017         if (num_entries > IPR_NUM_SDT_ENTRIES)
2018                 num_entries = IPR_NUM_SDT_ENTRIES;
2019
2020         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2021
2022         for (i = 0; i < num_entries; i++) {
2023                 if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
2024                         driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
2025                         break;
2026                 }
2027
2028                 if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) {
2029                         sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset);
2030                         start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
2031                         end_off = be32_to_cpu(sdt->entry[i].end_offset);
2032
2033                         if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) {
2034                                 bytes_to_copy = end_off - start_off;
2035                                 if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
2036                                         sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
2037                                         continue;
2038                                 }
2039
2040                                 /* Copy data from adapter to driver buffers */
2041                                 bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word,
2042                                                             bytes_to_copy);
2043
2044                                 ioa_dump->hdr.len += bytes_copied;
2045
2046                                 if (bytes_copied != bytes_to_copy) {
2047                                         driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
2048                                         break;
2049                                 }
2050                         }
2051                 }
2052         }
2053
2054         dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n");
2055
2056         /* Update dump_header */
2057         driver_dump->hdr.len += ioa_dump->hdr.len;
2058         wmb();
2059         ioa_cfg->sdt_state = DUMP_OBTAINED;
2060         LEAVE;
2061 }
2062
2063 #else
2064 #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0)
2065 #endif
2066
2067 /**
2068  * ipr_release_dump - Free adapter dump memory
2069  * @kref:       kref struct
2070  *
2071  * Return value:
2072  *      nothing
2073  **/
2074 static void ipr_release_dump(struct kref *kref)
2075 {
2076         struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref);
2077         struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg;
2078         unsigned long lock_flags = 0;
2079         int i;
2080
2081         ENTER;
2082         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2083         ioa_cfg->dump = NULL;
2084         ioa_cfg->sdt_state = INACTIVE;
2085         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2086
2087         for (i = 0; i < dump->ioa_dump.next_page_index; i++)
2088                 free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
2089
2090         kfree(dump);
2091         LEAVE;
2092 }
2093
2094 /**
2095  * ipr_worker_thread - Worker thread
2096  * @work:               ioa config struct
2097  *
2098  * Called at task level from a work thread. This function takes care
2099  * of adding and removing device from the mid-layer as configuration
2100  * changes are detected by the adapter.
2101  *
2102  * Return value:
2103  *      nothing
2104  **/
2105 static void ipr_worker_thread(struct work_struct *work)
2106 {
2107         unsigned long lock_flags;
2108         struct ipr_resource_entry *res;
2109         struct scsi_device *sdev;
2110         struct ipr_dump *dump;
2111         struct ipr_ioa_cfg *ioa_cfg =
2112                 container_of(work, struct ipr_ioa_cfg, work_q);
2113         u8 bus, target, lun;
2114         int did_work;
2115
2116         ENTER;
2117         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2118
2119         if (ioa_cfg->sdt_state == GET_DUMP) {
2120                 dump = ioa_cfg->dump;
2121                 if (!dump) {
2122                         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2123                         return;
2124                 }
2125                 kref_get(&dump->kref);
2126                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2127                 ipr_get_ioa_dump(ioa_cfg, dump);
2128                 kref_put(&dump->kref, ipr_release_dump);
2129
2130                 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2131                 if (ioa_cfg->sdt_state == DUMP_OBTAINED)
2132                         ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
2133                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2134                 return;
2135         }
2136
2137 restart:
2138         do {
2139                 did_work = 0;
2140                 if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) {
2141                         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2142                         return;
2143                 }
2144
2145                 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
2146                         if (res->del_from_ml && res->sdev) {
2147                                 did_work = 1;
2148                                 sdev = res->sdev;
2149                                 if (!scsi_device_get(sdev)) {
2150                                         list_move_tail(&res->queue, &ioa_cfg->free_res_q);
2151                                         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2152                                         scsi_remove_device(sdev);
2153                                         scsi_device_put(sdev);
2154                                         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2155                                 }
2156                                 break;
2157                         }
2158                 }
2159         } while(did_work);
2160
2161         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
2162                 if (res->add_to_ml) {
2163                         bus = res->cfgte.res_addr.bus;
2164                         target = res->cfgte.res_addr.target;
2165                         lun = res->cfgte.res_addr.lun;
2166                         res->add_to_ml = 0;
2167                         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2168                         scsi_add_device(ioa_cfg->host, bus, target, lun);
2169                         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2170                         goto restart;
2171                 }
2172         }
2173
2174         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2175         kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE);
2176         LEAVE;
2177 }
2178
2179 #ifdef CONFIG_SCSI_IPR_TRACE
2180 /**
2181  * ipr_read_trace - Dump the adapter trace
2182  * @kobj:               kobject struct
2183  * @buf:                buffer
2184  * @off:                offset
2185  * @count:              buffer size
2186  *
2187  * Return value:
2188  *      number of bytes printed to buffer
2189  **/
2190 static ssize_t ipr_read_trace(struct kobject *kobj, char *buf,
2191                               loff_t off, size_t count)
2192 {
2193         struct class_device *cdev = container_of(kobj,struct class_device,kobj);
2194         struct Scsi_Host *shost = class_to_shost(cdev);
2195         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2196         unsigned long lock_flags = 0;
2197         int size = IPR_TRACE_SIZE;
2198         char *src = (char *)ioa_cfg->trace;
2199
2200         if (off > size)
2201                 return 0;
2202         if (off + count > size) {
2203                 size -= off;
2204                 count = size;
2205         }
2206
2207         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2208         memcpy(buf, &src[off], count);
2209         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2210         return count;
2211 }
2212
2213 static struct bin_attribute ipr_trace_attr = {
2214         .attr = {
2215                 .name = "trace",
2216                 .mode = S_IRUGO,
2217         },
2218         .size = 0,
2219         .read = ipr_read_trace,
2220 };
2221 #endif
2222
2223 static const struct {
2224         enum ipr_cache_state state;
2225         char *name;
2226 } cache_state [] = {
2227         { CACHE_NONE, "none" },
2228         { CACHE_DISABLED, "disabled" },
2229         { CACHE_ENABLED, "enabled" }
2230 };
2231
2232 /**
2233  * ipr_show_write_caching - Show the write caching attribute
2234  * @class_dev:  class device struct
2235  * @buf:                buffer
2236  *
2237  * Return value:
2238  *      number of bytes printed to buffer
2239  **/
2240 static ssize_t ipr_show_write_caching(struct class_device *class_dev, char *buf)
2241 {
2242         struct Scsi_Host *shost = class_to_shost(class_dev);
2243         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2244         unsigned long lock_flags = 0;
2245         int i, len = 0;
2246
2247         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2248         for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
2249                 if (cache_state[i].state == ioa_cfg->cache_state) {
2250                         len = snprintf(buf, PAGE_SIZE, "%s\n", cache_state[i].name);
2251                         break;
2252                 }
2253         }
2254         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2255         return len;
2256 }
2257
2258
2259 /**
2260  * ipr_store_write_caching - Enable/disable adapter write cache
2261  * @class_dev:  class_device struct
2262  * @buf:                buffer
2263  * @count:              buffer size
2264  *
2265  * This function will enable/disable adapter write cache.
2266  *
2267  * Return value:
2268  *      count on success / other on failure
2269  **/
2270 static ssize_t ipr_store_write_caching(struct class_device *class_dev,
2271                                         const char *buf, size_t count)
2272 {
2273         struct Scsi_Host *shost = class_to_shost(class_dev);
2274         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2275         unsigned long lock_flags = 0;
2276         enum ipr_cache_state new_state = CACHE_INVALID;
2277         int i;
2278
2279         if (!capable(CAP_SYS_ADMIN))
2280                 return -EACCES;
2281         if (ioa_cfg->cache_state == CACHE_NONE)
2282                 return -EINVAL;
2283
2284         for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
2285                 if (!strncmp(cache_state[i].name, buf, strlen(cache_state[i].name))) {
2286                         new_state = cache_state[i].state;
2287                         break;
2288                 }
2289         }
2290
2291         if (new_state != CACHE_DISABLED && new_state != CACHE_ENABLED)
2292                 return -EINVAL;
2293
2294         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2295         if (ioa_cfg->cache_state == new_state) {
2296                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2297                 return count;
2298         }
2299
2300         ioa_cfg->cache_state = new_state;
2301         dev_info(&ioa_cfg->pdev->dev, "%s adapter write cache.\n",
2302                  new_state == CACHE_ENABLED ? "Enabling" : "Disabling");
2303         if (!ioa_cfg->in_reset_reload)
2304                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2305         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2306         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2307
2308         return count;
2309 }
2310
2311 static struct class_device_attribute ipr_ioa_cache_attr = {
2312         .attr = {
2313                 .name =         "write_cache",
2314                 .mode =         S_IRUGO | S_IWUSR,
2315         },
2316         .show = ipr_show_write_caching,
2317         .store = ipr_store_write_caching
2318 };
2319
2320 /**
2321  * ipr_show_fw_version - Show the firmware version
2322  * @class_dev:  class device struct
2323  * @buf:                buffer
2324  *
2325  * Return value:
2326  *      number of bytes printed to buffer
2327  **/
2328 static ssize_t ipr_show_fw_version(struct class_device *class_dev, char *buf)
2329 {
2330         struct Scsi_Host *shost = class_to_shost(class_dev);
2331         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2332         struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
2333         unsigned long lock_flags = 0;
2334         int len;
2335
2336         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2337         len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n",
2338                        ucode_vpd->major_release, ucode_vpd->card_type,
2339                        ucode_vpd->minor_release[0],
2340                        ucode_vpd->minor_release[1]);
2341         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2342         return len;
2343 }
2344
2345 static struct class_device_attribute ipr_fw_version_attr = {
2346         .attr = {
2347                 .name =         "fw_version",
2348                 .mode =         S_IRUGO,
2349         },
2350         .show = ipr_show_fw_version,
2351 };
2352
2353 /**
2354  * ipr_show_log_level - Show the adapter's error logging level
2355  * @class_dev:  class device struct
2356  * @buf:                buffer
2357  *
2358  * Return value:
2359  *      number of bytes printed to buffer
2360  **/
2361 static ssize_t ipr_show_log_level(struct class_device *class_dev, char *buf)
2362 {
2363         struct Scsi_Host *shost = class_to_shost(class_dev);
2364         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2365         unsigned long lock_flags = 0;
2366         int len;
2367
2368         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2369         len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level);
2370         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2371         return len;
2372 }
2373
2374 /**
2375  * ipr_store_log_level - Change the adapter's error logging level
2376  * @class_dev:  class device struct
2377  * @buf:                buffer
2378  *
2379  * Return value:
2380  *      number of bytes printed to buffer
2381  **/
2382 static ssize_t ipr_store_log_level(struct class_device *class_dev,
2383                                    const char *buf, size_t count)
2384 {
2385         struct Scsi_Host *shost = class_to_shost(class_dev);
2386         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2387         unsigned long lock_flags = 0;
2388
2389         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2390         ioa_cfg->log_level = simple_strtoul(buf, NULL, 10);
2391         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2392         return strlen(buf);
2393 }
2394
2395 static struct class_device_attribute ipr_log_level_attr = {
2396         .attr = {
2397                 .name =         "log_level",
2398                 .mode =         S_IRUGO | S_IWUSR,
2399         },
2400         .show = ipr_show_log_level,
2401         .store = ipr_store_log_level
2402 };
2403
2404 /**
2405  * ipr_store_diagnostics - IOA Diagnostics interface
2406  * @class_dev:  class_device struct
2407  * @buf:                buffer
2408  * @count:              buffer size
2409  *
2410  * This function will reset the adapter and wait a reasonable
2411  * amount of time for any errors that the adapter might log.
2412  *
2413  * Return value:
2414  *      count on success / other on failure
2415  **/
2416 static ssize_t ipr_store_diagnostics(struct class_device *class_dev,
2417                                      const char *buf, size_t count)
2418 {
2419         struct Scsi_Host *shost = class_to_shost(class_dev);
2420         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2421         unsigned long lock_flags = 0;
2422         int rc = count;
2423
2424         if (!capable(CAP_SYS_ADMIN))
2425                 return -EACCES;
2426
2427         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2428         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2429         ioa_cfg->errors_logged = 0;
2430         ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2431
2432         if (ioa_cfg->in_reset_reload) {
2433                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2434                 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2435
2436                 /* Wait for a second for any errors to be logged */
2437                 msleep(1000);
2438         } else {
2439                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2440                 return -EIO;
2441         }
2442
2443         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2444         if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged)
2445                 rc = -EIO;
2446         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2447
2448         return rc;
2449 }
2450
2451 static struct class_device_attribute ipr_diagnostics_attr = {
2452         .attr = {
2453                 .name =         "run_diagnostics",
2454                 .mode =         S_IWUSR,
2455         },
2456         .store = ipr_store_diagnostics
2457 };
2458
2459 /**
2460  * ipr_show_adapter_state - Show the adapter's state
2461  * @class_dev:  class device struct
2462  * @buf:                buffer
2463  *
2464  * Return value:
2465  *      number of bytes printed to buffer
2466  **/
2467 static ssize_t ipr_show_adapter_state(struct class_device *class_dev, char *buf)
2468 {
2469         struct Scsi_Host *shost = class_to_shost(class_dev);
2470         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2471         unsigned long lock_flags = 0;
2472         int len;
2473
2474         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2475         if (ioa_cfg->ioa_is_dead)
2476                 len = snprintf(buf, PAGE_SIZE, "offline\n");
2477         else
2478                 len = snprintf(buf, PAGE_SIZE, "online\n");
2479         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2480         return len;
2481 }
2482
2483 /**
2484  * ipr_store_adapter_state - Change adapter state
2485  * @class_dev:  class_device struct
2486  * @buf:                buffer
2487  * @count:              buffer size
2488  *
2489  * This function will change the adapter's state.
2490  *
2491  * Return value:
2492  *      count on success / other on failure
2493  **/
2494 static ssize_t ipr_store_adapter_state(struct class_device *class_dev,
2495                                        const char *buf, size_t count)
2496 {
2497         struct Scsi_Host *shost = class_to_shost(class_dev);
2498         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2499         unsigned long lock_flags;
2500         int result = count;
2501
2502         if (!capable(CAP_SYS_ADMIN))
2503                 return -EACCES;
2504
2505         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2506         if (ioa_cfg->ioa_is_dead && !strncmp(buf, "online", 6)) {
2507                 ioa_cfg->ioa_is_dead = 0;
2508                 ioa_cfg->reset_retries = 0;
2509                 ioa_cfg->in_ioa_bringdown = 0;
2510                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
2511         }
2512         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2513         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2514
2515         return result;
2516 }
2517
2518 static struct class_device_attribute ipr_ioa_state_attr = {
2519         .attr = {
2520                 .name =         "state",
2521                 .mode =         S_IRUGO | S_IWUSR,
2522         },
2523         .show = ipr_show_adapter_state,
2524         .store = ipr_store_adapter_state
2525 };
2526
2527 /**
2528  * ipr_store_reset_adapter - Reset the adapter
2529  * @class_dev:  class_device struct
2530  * @buf:                buffer
2531  * @count:              buffer size
2532  *
2533  * This function will reset the adapter.
2534  *
2535  * Return value:
2536  *      count on success / other on failure
2537  **/
2538 static ssize_t ipr_store_reset_adapter(struct class_device *class_dev,
2539                                        const char *buf, size_t count)
2540 {
2541         struct Scsi_Host *shost = class_to_shost(class_dev);
2542         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2543         unsigned long lock_flags;
2544         int result = count;
2545
2546         if (!capable(CAP_SYS_ADMIN))
2547                 return -EACCES;
2548
2549         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2550         if (!ioa_cfg->in_reset_reload)
2551                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2552         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2553         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2554
2555         return result;
2556 }
2557
2558 static struct class_device_attribute ipr_ioa_reset_attr = {
2559         .attr = {
2560                 .name =         "reset_host",
2561                 .mode =         S_IWUSR,
2562         },
2563         .store = ipr_store_reset_adapter
2564 };
2565
2566 /**
2567  * ipr_alloc_ucode_buffer - Allocates a microcode download buffer
2568  * @buf_len:            buffer length
2569  *
2570  * Allocates a DMA'able buffer in chunks and assembles a scatter/gather
2571  * list to use for microcode download
2572  *
2573  * Return value:
2574  *      pointer to sglist / NULL on failure
2575  **/
2576 static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
2577 {
2578         int sg_size, order, bsize_elem, num_elem, i, j;
2579         struct ipr_sglist *sglist;
2580         struct scatterlist *scatterlist;
2581         struct page *page;
2582
2583         /* Get the minimum size per scatter/gather element */
2584         sg_size = buf_len / (IPR_MAX_SGLIST - 1);
2585
2586         /* Get the actual size per element */
2587         order = get_order(sg_size);
2588
2589         /* Determine the actual number of bytes per element */
2590         bsize_elem = PAGE_SIZE * (1 << order);
2591
2592         /* Determine the actual number of sg entries needed */
2593         if (buf_len % bsize_elem)
2594                 num_elem = (buf_len / bsize_elem) + 1;
2595         else
2596                 num_elem = buf_len / bsize_elem;
2597
2598         /* Allocate a scatter/gather list for the DMA */
2599         sglist = kzalloc(sizeof(struct ipr_sglist) +
2600                          (sizeof(struct scatterlist) * (num_elem - 1)),
2601                          GFP_KERNEL);
2602
2603         if (sglist == NULL) {
2604                 ipr_trace;
2605                 return NULL;
2606         }
2607
2608         scatterlist = sglist->scatterlist;
2609
2610         sglist->order = order;
2611         sglist->num_sg = num_elem;
2612
2613         /* Allocate a bunch of sg elements */
2614         for (i = 0; i < num_elem; i++) {
2615                 page = alloc_pages(GFP_KERNEL, order);
2616                 if (!page) {
2617                         ipr_trace;
2618
2619                         /* Free up what we already allocated */
2620                         for (j = i - 1; j >= 0; j--)
2621                                 __free_pages(scatterlist[j].page, order);
2622                         kfree(sglist);
2623                         return NULL;
2624                 }
2625
2626                 scatterlist[i].page = page;
2627         }
2628
2629         return sglist;
2630 }
2631
2632 /**
2633  * ipr_free_ucode_buffer - Frees a microcode download buffer
2634  * @p_dnld:             scatter/gather list pointer
2635  *
2636  * Free a DMA'able ucode download buffer previously allocated with
2637  * ipr_alloc_ucode_buffer
2638  *
2639  * Return value:
2640  *      nothing
2641  **/
2642 static void ipr_free_ucode_buffer(struct ipr_sglist *sglist)
2643 {
2644         int i;
2645
2646         for (i = 0; i < sglist->num_sg; i++)
2647                 __free_pages(sglist->scatterlist[i].page, sglist->order);
2648
2649         kfree(sglist);
2650 }
2651
2652 /**
2653  * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer
2654  * @sglist:             scatter/gather list pointer
2655  * @buffer:             buffer pointer
2656  * @len:                buffer length
2657  *
2658  * Copy a microcode image from a user buffer into a buffer allocated by
2659  * ipr_alloc_ucode_buffer
2660  *
2661  * Return value:
2662  *      0 on success / other on failure
2663  **/
2664 static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist,
2665                                  u8 *buffer, u32 len)
2666 {
2667         int bsize_elem, i, result = 0;
2668         struct scatterlist *scatterlist;
2669         void *kaddr;
2670
2671         /* Determine the actual number of bytes per element */
2672         bsize_elem = PAGE_SIZE * (1 << sglist->order);
2673
2674         scatterlist = sglist->scatterlist;
2675
2676         for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) {
2677                 kaddr = kmap(scatterlist[i].page);
2678                 memcpy(kaddr, buffer, bsize_elem);
2679                 kunmap(scatterlist[i].page);
2680
2681                 scatterlist[i].length = bsize_elem;
2682
2683                 if (result != 0) {
2684                         ipr_trace;
2685                         return result;
2686                 }
2687         }
2688
2689         if (len % bsize_elem) {
2690                 kaddr = kmap(scatterlist[i].page);
2691                 memcpy(kaddr, buffer, len % bsize_elem);
2692                 kunmap(scatterlist[i].page);
2693
2694                 scatterlist[i].length = len % bsize_elem;
2695         }
2696
2697         sglist->buffer_len = len;
2698         return result;
2699 }
2700
2701 /**
2702  * ipr_build_ucode_ioadl - Build a microcode download IOADL
2703  * @ipr_cmd:    ipr command struct
2704  * @sglist:             scatter/gather list
2705  *
2706  * Builds a microcode download IOA data list (IOADL).
2707  *
2708  **/
2709 static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd,
2710                                   struct ipr_sglist *sglist)
2711 {
2712         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
2713         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
2714         struct scatterlist *scatterlist = sglist->scatterlist;
2715         int i;
2716
2717         ipr_cmd->dma_use_sg = sglist->num_dma_sg;
2718         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
2719         ioarcb->write_data_transfer_length = cpu_to_be32(sglist->buffer_len);
2720         ioarcb->write_ioadl_len =
2721                 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
2722
2723         for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
2724                 ioadl[i].flags_and_data_len =
2725                         cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i]));
2726                 ioadl[i].address =
2727                         cpu_to_be32(sg_dma_address(&scatterlist[i]));
2728         }
2729
2730         ioadl[i-1].flags_and_data_len |=
2731                 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
2732 }
2733
2734 /**
2735  * ipr_update_ioa_ucode - Update IOA's microcode
2736  * @ioa_cfg:    ioa config struct
2737  * @sglist:             scatter/gather list
2738  *
2739  * Initiate an adapter reset to update the IOA's microcode
2740  *
2741  * Return value:
2742  *      0 on success / -EIO on failure
2743  **/
2744 static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg,
2745                                 struct ipr_sglist *sglist)
2746 {
2747         unsigned long lock_flags;
2748
2749         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2750
2751         if (ioa_cfg->ucode_sglist) {
2752                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2753                 dev_err(&ioa_cfg->pdev->dev,
2754                         "Microcode download already in progress\n");
2755                 return -EIO;
2756         }
2757
2758         sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist,
2759                                         sglist->num_sg, DMA_TO_DEVICE);
2760
2761         if (!sglist->num_dma_sg) {
2762                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2763                 dev_err(&ioa_cfg->pdev->dev,
2764                         "Failed to map microcode download buffer!\n");
2765                 return -EIO;
2766         }
2767
2768         ioa_cfg->ucode_sglist = sglist;
2769         ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2770         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2771         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2772
2773         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2774         ioa_cfg->ucode_sglist = NULL;
2775         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2776         return 0;
2777 }
2778
2779 /**
2780  * ipr_store_update_fw - Update the firmware on the adapter
2781  * @class_dev:  class_device struct
2782  * @buf:                buffer
2783  * @count:              buffer size
2784  *
2785  * This function will update the firmware on the adapter.
2786  *
2787  * Return value:
2788  *      count on success / other on failure
2789  **/
2790 static ssize_t ipr_store_update_fw(struct class_device *class_dev,
2791                                        const char *buf, size_t count)
2792 {
2793         struct Scsi_Host *shost = class_to_shost(class_dev);
2794         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2795         struct ipr_ucode_image_header *image_hdr;
2796         const struct firmware *fw_entry;
2797         struct ipr_sglist *sglist;
2798         char fname[100];
2799         char *src;
2800         int len, result, dnld_size;
2801
2802         if (!capable(CAP_SYS_ADMIN))
2803                 return -EACCES;
2804
2805         len = snprintf(fname, 99, "%s", buf);
2806         fname[len-1] = '\0';
2807
2808         if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
2809                 dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);
2810                 return -EIO;
2811         }
2812
2813         image_hdr = (struct ipr_ucode_image_header *)fw_entry->data;
2814
2815         if (be32_to_cpu(image_hdr->header_length) > fw_entry->size ||
2816             (ioa_cfg->vpd_cbs->page3_data.card_type &&
2817              ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) {
2818                 dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n");
2819                 release_firmware(fw_entry);
2820                 return -EINVAL;
2821         }
2822
2823         src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length);
2824         dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length);
2825         sglist = ipr_alloc_ucode_buffer(dnld_size);
2826
2827         if (!sglist) {
2828                 dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n");
2829                 release_firmware(fw_entry);
2830                 return -ENOMEM;
2831         }
2832
2833         result = ipr_copy_ucode_buffer(sglist, src, dnld_size);
2834
2835         if (result) {
2836                 dev_err(&ioa_cfg->pdev->dev,
2837                         "Microcode buffer copy to DMA buffer failed\n");
2838                 goto out;
2839         }
2840
2841         result = ipr_update_ioa_ucode(ioa_cfg, sglist);
2842
2843         if (!result)
2844                 result = count;
2845 out:
2846         ipr_free_ucode_buffer(sglist);
2847         release_firmware(fw_entry);
2848         return result;
2849 }
2850
2851 static struct class_device_attribute ipr_update_fw_attr = {
2852         .attr = {
2853                 .name =         "update_fw",
2854                 .mode =         S_IWUSR,
2855         },
2856         .store = ipr_store_update_fw
2857 };
2858
2859 static struct class_device_attribute *ipr_ioa_attrs[] = {
2860         &ipr_fw_version_attr,
2861         &ipr_log_level_attr,
2862         &ipr_diagnostics_attr,
2863         &ipr_ioa_state_attr,
2864         &ipr_ioa_reset_attr,
2865         &ipr_update_fw_attr,
2866         &ipr_ioa_cache_attr,
2867         NULL,
2868 };
2869
2870 #ifdef CONFIG_SCSI_IPR_DUMP
2871 /**
2872  * ipr_read_dump - Dump the adapter
2873  * @kobj:               kobject struct
2874  * @buf:                buffer
2875  * @off:                offset
2876  * @count:              buffer size
2877  *
2878  * Return value:
2879  *      number of bytes printed to buffer
2880  **/
2881 static ssize_t ipr_read_dump(struct kobject *kobj, char *buf,
2882                               loff_t off, size_t count)
2883 {
2884         struct class_device *cdev = container_of(kobj,struct class_device,kobj);
2885         struct Scsi_Host *shost = class_to_shost(cdev);
2886         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2887         struct ipr_dump *dump;
2888         unsigned long lock_flags = 0;
2889         char *src;
2890         int len;
2891         size_t rc = count;
2892
2893         if (!capable(CAP_SYS_ADMIN))
2894                 return -EACCES;
2895
2896         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2897         dump = ioa_cfg->dump;
2898
2899         if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) {
2900                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2901                 return 0;
2902         }
2903         kref_get(&dump->kref);
2904         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2905
2906         if (off > dump->driver_dump.hdr.len) {
2907                 kref_put(&dump->kref, ipr_release_dump);
2908                 return 0;
2909         }
2910
2911         if (off + count > dump->driver_dump.hdr.len) {
2912                 count = dump->driver_dump.hdr.len - off;
2913                 rc = count;
2914         }
2915
2916         if (count && off < sizeof(dump->driver_dump)) {
2917                 if (off + count > sizeof(dump->driver_dump))
2918                         len = sizeof(dump->driver_dump) - off;
2919                 else
2920                         len = count;
2921                 src = (u8 *)&dump->driver_dump + off;
2922                 memcpy(buf, src, len);
2923                 buf += len;
2924                 off += len;
2925                 count -= len;
2926         }
2927
2928         off -= sizeof(dump->driver_dump);
2929
2930         if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
2931                 if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
2932                         len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
2933                 else
2934                         len = count;
2935                 src = (u8 *)&dump->ioa_dump + off;
2936                 memcpy(buf, src, len);
2937                 buf += len;
2938                 off += len;
2939                 count -= len;
2940         }
2941
2942         off -= offsetof(struct ipr_ioa_dump, ioa_data);
2943
2944         while (count) {
2945                 if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
2946                         len = PAGE_ALIGN(off) - off;
2947                 else
2948                         len = count;
2949                 src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT];
2950                 src += off & ~PAGE_MASK;
2951                 memcpy(buf, src, len);
2952                 buf += len;
2953                 off += len;
2954                 count -= len;
2955         }
2956
2957         kref_put(&dump->kref, ipr_release_dump);
2958         return rc;
2959 }
2960
2961 /**
2962  * ipr_alloc_dump - Prepare for adapter dump
2963  * @ioa_cfg:    ioa config struct
2964  *
2965  * Return value:
2966  *      0 on success / other on failure
2967  **/
2968 static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
2969 {
2970         struct ipr_dump *dump;
2971         unsigned long lock_flags = 0;
2972
2973         ENTER;
2974         dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL);
2975
2976         if (!dump) {
2977                 ipr_err("Dump memory allocation failed\n");
2978                 return -ENOMEM;
2979         }
2980
2981         kref_init(&dump->kref);
2982         dump->ioa_cfg = ioa_cfg;
2983
2984         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2985
2986         if (INACTIVE != ioa_cfg->sdt_state) {
2987                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2988                 kfree(dump);
2989                 return 0;
2990         }
2991
2992         ioa_cfg->dump = dump;
2993         ioa_cfg->sdt_state = WAIT_FOR_DUMP;
2994         if (ioa_cfg->ioa_is_dead && !ioa_cfg->dump_taken) {
2995                 ioa_cfg->dump_taken = 1;
2996                 schedule_work(&ioa_cfg->work_q);
2997         }
2998         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2999
3000         LEAVE;
3001         return 0;
3002 }
3003
3004 /**
3005  * ipr_free_dump - Free adapter dump memory
3006  * @ioa_cfg:    ioa config struct
3007  *
3008  * Return value:
3009  *      0 on success / other on failure
3010  **/
3011 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
3012 {
3013         struct ipr_dump *dump;
3014         unsigned long lock_flags = 0;
3015
3016         ENTER;
3017
3018         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3019         dump = ioa_cfg->dump;
3020         if (!dump) {
3021                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3022                 return 0;
3023         }
3024
3025         ioa_cfg->dump = NULL;
3026         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3027
3028         kref_put(&dump->kref, ipr_release_dump);
3029
3030         LEAVE;
3031         return 0;
3032 }
3033
3034 /**
3035  * ipr_write_dump - Setup dump state of adapter
3036  * @kobj:               kobject struct
3037  * @buf:                buffer
3038  * @off:                offset
3039  * @count:              buffer size
3040  *
3041  * Return value:
3042  *      number of bytes printed to buffer
3043  **/
3044 static ssize_t ipr_write_dump(struct kobject *kobj, char *buf,
3045                               loff_t off, size_t count)
3046 {
3047         struct class_device *cdev = container_of(kobj,struct class_device,kobj);
3048         struct Scsi_Host *shost = class_to_shost(cdev);
3049         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
3050         int rc;
3051
3052         if (!capable(CAP_SYS_ADMIN))
3053                 return -EACCES;
3054
3055         if (buf[0] == '1')
3056                 rc = ipr_alloc_dump(ioa_cfg);
3057         else if (buf[0] == '0')
3058                 rc = ipr_free_dump(ioa_cfg);
3059         else
3060                 return -EINVAL;
3061
3062         if (rc)
3063                 return rc;
3064         else
3065                 return count;
3066 }
3067
3068 static struct bin_attribute ipr_dump_attr = {
3069         .attr = {
3070                 .name = "dump",
3071                 .mode = S_IRUSR | S_IWUSR,
3072         },
3073         .size = 0,
3074         .read = ipr_read_dump,
3075         .write = ipr_write_dump
3076 };
3077 #else
3078 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; };
3079 #endif
3080
3081 /**
3082  * ipr_change_queue_depth - Change the device's queue depth
3083  * @sdev:       scsi device struct
3084  * @qdepth:     depth to set
3085  *
3086  * Return value:
3087  *      actual depth set
3088  **/
3089 static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth)
3090 {
3091         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3092         struct ipr_resource_entry *res;
3093         unsigned long lock_flags = 0;
3094
3095         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3096         res = (struct ipr_resource_entry *)sdev->hostdata;
3097
3098         if (res && ipr_is_gata(res) && qdepth > IPR_MAX_CMD_PER_ATA_LUN)
3099                 qdepth = IPR_MAX_CMD_PER_ATA_LUN;
3100         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3101
3102         scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
3103         return sdev->queue_depth;
3104 }
3105
3106 /**
3107  * ipr_change_queue_type - Change the device's queue type
3108  * @dsev:               scsi device struct
3109  * @tag_type:   type of tags to use
3110  *
3111  * Return value:
3112  *      actual queue type set
3113  **/
3114 static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type)
3115 {
3116         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3117         struct ipr_resource_entry *res;
3118         unsigned long lock_flags = 0;
3119
3120         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3121         res = (struct ipr_resource_entry *)sdev->hostdata;
3122
3123         if (res) {
3124                 if (ipr_is_gscsi(res) && sdev->tagged_supported) {
3125                         /*
3126                          * We don't bother quiescing the device here since the
3127                          * adapter firmware does it for us.
3128                          */
3129                         scsi_set_tag_type(sdev, tag_type);
3130
3131                         if (tag_type)
3132                                 scsi_activate_tcq(sdev, sdev->queue_depth);
3133                         else
3134                                 scsi_deactivate_tcq(sdev, sdev->queue_depth);
3135                 } else
3136                         tag_type = 0;
3137         } else
3138                 tag_type = 0;
3139
3140         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3141         return tag_type;
3142 }
3143
3144 /**
3145  * ipr_show_adapter_handle - Show the adapter's resource handle for this device
3146  * @dev:        device struct
3147  * @buf:        buffer
3148  *
3149  * Return value:
3150  *      number of bytes printed to buffer
3151  **/
3152 static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf)
3153 {
3154         struct scsi_device *sdev = to_scsi_device(dev);
3155         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3156         struct ipr_resource_entry *res;
3157         unsigned long lock_flags = 0;
3158         ssize_t len = -ENXIO;
3159
3160         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3161         res = (struct ipr_resource_entry *)sdev->hostdata;
3162         if (res)
3163                 len = snprintf(buf, PAGE_SIZE, "%08X\n", res->cfgte.res_handle);
3164         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3165         return len;
3166 }
3167
3168 static struct device_attribute ipr_adapter_handle_attr = {
3169         .attr = {
3170                 .name =         "adapter_handle",
3171                 .mode =         S_IRUSR,
3172         },
3173         .show = ipr_show_adapter_handle
3174 };
3175
3176 static struct device_attribute *ipr_dev_attrs[] = {
3177         &ipr_adapter_handle_attr,
3178         NULL,
3179 };
3180
3181 /**
3182  * ipr_biosparam - Return the HSC mapping
3183  * @sdev:                       scsi device struct
3184  * @block_device:       block device pointer
3185  * @capacity:           capacity of the device
3186  * @parm:                       Array containing returned HSC values.
3187  *
3188  * This function generates the HSC parms that fdisk uses.
3189  * We want to make sure we return something that places partitions
3190  * on 4k boundaries for best performance with the IOA.
3191  *
3192  * Return value:
3193  *      0 on success
3194  **/
3195 static int ipr_biosparam(struct scsi_device *sdev,
3196                          struct block_device *block_device,
3197                          sector_t capacity, int *parm)
3198 {
3199         int heads, sectors;
3200         sector_t cylinders;
3201
3202         heads = 128;
3203         sectors = 32;
3204
3205         cylinders = capacity;
3206         sector_div(cylinders, (128 * 32));
3207
3208         /* return result */
3209         parm[0] = heads;
3210         parm[1] = sectors;
3211         parm[2] = cylinders;
3212
3213         return 0;
3214 }
3215
3216 /**
3217  * ipr_find_starget - Find target based on bus/target.
3218  * @starget:    scsi target struct
3219  *
3220  * Return value:
3221  *      resource entry pointer if found / NULL if not found
3222  **/
3223 static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget)
3224 {
3225         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
3226         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
3227         struct ipr_resource_entry *res;
3228
3229         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3230                 if ((res->cfgte.res_addr.bus == starget->channel) &&
3231                     (res->cfgte.res_addr.target == starget->id) &&
3232                     (res->cfgte.res_addr.lun == 0)) {
3233                         return res;
3234                 }
3235         }
3236
3237         return NULL;
3238 }
3239
3240 static struct ata_port_info sata_port_info;
3241
3242 /**
3243  * ipr_target_alloc - Prepare for commands to a SCSI target
3244  * @starget:    scsi target struct
3245  *
3246  * If the device is a SATA device, this function allocates an
3247  * ATA port with libata, else it does nothing.
3248  *
3249  * Return value:
3250  *      0 on success / non-0 on failure
3251  **/
3252 static int ipr_target_alloc(struct scsi_target *starget)
3253 {
3254         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
3255         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
3256         struct ipr_sata_port *sata_port;
3257         struct ata_port *ap;
3258         struct ipr_resource_entry *res;
3259         unsigned long lock_flags;
3260
3261         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3262         res = ipr_find_starget(starget);
3263         starget->hostdata = NULL;
3264
3265         if (res && ipr_is_gata(res)) {
3266                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3267                 sata_port = kzalloc(sizeof(*sata_port), GFP_KERNEL);
3268                 if (!sata_port)
3269                         return -ENOMEM;
3270
3271                 ap = ata_sas_port_alloc(&ioa_cfg->ata_host, &sata_port_info, shost);
3272                 if (ap) {
3273                         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3274                         sata_port->ioa_cfg = ioa_cfg;
3275                         sata_port->ap = ap;
3276                         sata_port->res = res;
3277
3278                         res->sata_port = sata_port;
3279                         ap->private_data = sata_port;
3280                         starget->hostdata = sata_port;
3281                 } else {
3282                         kfree(sata_port);
3283                         return -ENOMEM;
3284                 }
3285         }
3286         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3287
3288         return 0;
3289 }
3290
3291 /**
3292  * ipr_target_destroy - Destroy a SCSI target
3293  * @starget:    scsi target struct
3294  *
3295  * If the device was a SATA device, this function frees the libata
3296  * ATA port, else it does nothing.
3297  *
3298  **/
3299 static void ipr_target_destroy(struct scsi_target *starget)
3300 {
3301         struct ipr_sata_port *sata_port = starget->hostdata;
3302
3303         if (sata_port) {
3304                 starget->hostdata = NULL;
3305                 ata_sas_port_destroy(sata_port->ap);
3306                 kfree(sata_port);
3307         }
3308 }
3309
3310 /**
3311  * ipr_find_sdev - Find device based on bus/target/lun.
3312  * @sdev:       scsi device struct
3313  *
3314  * Return value:
3315  *      resource entry pointer if found / NULL if not found
3316  **/
3317 static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
3318 {
3319         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3320         struct ipr_resource_entry *res;
3321
3322         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3323                 if ((res->cfgte.res_addr.bus == sdev->channel) &&
3324                     (res->cfgte.res_addr.target == sdev->id) &&
3325                     (res->cfgte.res_addr.lun == sdev->lun))
3326                         return res;
3327         }
3328
3329         return NULL;
3330 }
3331
3332 /**
3333  * ipr_slave_destroy - Unconfigure a SCSI device
3334  * @sdev:       scsi device struct
3335  *
3336  * Return value:
3337  *      nothing
3338  **/
3339 static void ipr_slave_destroy(struct scsi_device *sdev)
3340 {
3341         struct ipr_resource_entry *res;
3342         struct ipr_ioa_cfg *ioa_cfg;
3343         unsigned long lock_flags = 0;
3344
3345         ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3346
3347         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3348         res = (struct ipr_resource_entry *) sdev->hostdata;
3349         if (res) {
3350                 if (res->sata_port)
3351                         ata_port_disable(res->sata_port->ap);
3352                 sdev->hostdata = NULL;
3353                 res->sdev = NULL;
3354                 res->sata_port = NULL;
3355         }
3356         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3357 }
3358
3359 /**
3360  * ipr_slave_configure - Configure a SCSI device
3361  * @sdev:       scsi device struct
3362  *
3363  * This function configures the specified scsi device.
3364  *
3365  * Return value:
3366  *      0 on success
3367  **/
3368 static int ipr_slave_configure(struct scsi_device *sdev)
3369 {
3370         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3371         struct ipr_resource_entry *res;
3372         unsigned long lock_flags = 0;
3373
3374         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3375         res = sdev->hostdata;
3376         if (res) {
3377                 if (ipr_is_af_dasd_device(res))
3378                         sdev->type = TYPE_RAID;
3379                 if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res)) {
3380                         sdev->scsi_level = 4;
3381                         sdev->no_uld_attach = 1;
3382                 }
3383                 if (ipr_is_vset_device(res)) {
3384                         sdev->timeout = IPR_VSET_RW_TIMEOUT;
3385                         blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
3386                 }
3387                 if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
3388                         sdev->allow_restart = 1;
3389                 if (ipr_is_gata(res) && res->sata_port) {
3390                         scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
3391                         ata_sas_slave_configure(sdev, res->sata_port->ap);
3392                 } else {
3393                         scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
3394                 }
3395         }
3396         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3397         return 0;
3398 }
3399
3400 /**
3401  * ipr_ata_slave_alloc - Prepare for commands to a SATA device
3402  * @sdev:       scsi device struct
3403  *
3404  * This function initializes an ATA port so that future commands
3405  * sent through queuecommand will work.
3406  *
3407  * Return value:
3408  *      0 on success
3409  **/
3410 static int ipr_ata_slave_alloc(struct scsi_device *sdev)
3411 {
3412         struct ipr_sata_port *sata_port = NULL;
3413         int rc = -ENXIO;
3414
3415         ENTER;
3416         if (sdev->sdev_target)
3417                 sata_port = sdev->sdev_target->hostdata;
3418         if (sata_port)
3419                 rc = ata_sas_port_init(sata_port->ap);
3420         if (rc)
3421                 ipr_slave_destroy(sdev);
3422
3423         LEAVE;
3424         return rc;
3425 }
3426
3427 /**
3428  * ipr_slave_alloc - Prepare for commands to a device.
3429  * @sdev:       scsi device struct
3430  *
3431  * This function saves a pointer to the resource entry
3432  * in the scsi device struct if the device exists. We
3433  * can then use this pointer in ipr_queuecommand when
3434  * handling new commands.
3435  *
3436  * Return value:
3437  *      0 on success / -ENXIO if device does not exist
3438  **/
3439 static int ipr_slave_alloc(struct scsi_device *sdev)
3440 {
3441         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3442         struct ipr_resource_entry *res;
3443         unsigned long lock_flags;
3444         int rc = -ENXIO;
3445
3446         sdev->hostdata = NULL;
3447
3448         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3449
3450         res = ipr_find_sdev(sdev);
3451         if (res) {
3452                 res->sdev = sdev;
3453                 res->add_to_ml = 0;
3454                 res->in_erp = 0;
3455                 sdev->hostdata = res;
3456                 if (!ipr_is_naca_model(res))
3457                         res->needs_sync_complete = 1;
3458                 rc = 0;
3459                 if (ipr_is_gata(res)) {
3460                         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3461                         return ipr_ata_slave_alloc(sdev);
3462                 }
3463         }
3464
3465         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3466
3467         return rc;
3468 }
3469
3470 /**
3471  * ipr_eh_host_reset - Reset the host adapter
3472  * @scsi_cmd:   scsi command struct
3473  *
3474  * Return value:
3475  *      SUCCESS / FAILED
3476  **/
3477 static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
3478 {
3479         struct ipr_ioa_cfg *ioa_cfg;
3480         int rc;
3481
3482         ENTER;
3483         ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
3484
3485         dev_err(&ioa_cfg->pdev->dev,
3486                 "Adapter being reset as a result of error recovery.\n");
3487
3488         if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3489                 ioa_cfg->sdt_state = GET_DUMP;
3490
3491         rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
3492
3493         LEAVE;
3494         return rc;
3495 }
3496
3497 static int ipr_eh_host_reset(struct scsi_cmnd * cmd)
3498 {
3499         int rc;
3500
3501         spin_lock_irq(cmd->device->host->host_lock);
3502         rc = __ipr_eh_host_reset(cmd);
3503         spin_unlock_irq(cmd->device->host->host_lock);
3504
3505         return rc;
3506 }
3507
3508 /**
3509  * ipr_device_reset - Reset the device
3510  * @ioa_cfg:    ioa config struct
3511  * @res:                resource entry struct
3512  *
3513  * This function issues a device reset to the affected device.
3514  * If the device is a SCSI device, a LUN reset will be sent
3515  * to the device first. If that does not work, a target reset
3516  * will be sent. If the device is a SATA device, a PHY reset will
3517  * be sent.
3518  *
3519  * Return value:
3520  *      0 on success / non-zero on failure
3521  **/
3522 static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
3523                             struct ipr_resource_entry *res)
3524 {
3525         struct ipr_cmnd *ipr_cmd;
3526         struct ipr_ioarcb *ioarcb;
3527         struct ipr_cmd_pkt *cmd_pkt;
3528         struct ipr_ioarcb_ata_regs *regs;
3529         u32 ioasc;
3530
3531         ENTER;
3532         ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3533         ioarcb = &ipr_cmd->ioarcb;
3534         cmd_pkt = &ioarcb->cmd_pkt;
3535         regs = &ioarcb->add_data.u.regs;
3536
3537         ioarcb->res_handle = res->cfgte.res_handle;
3538         cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3539         cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
3540         if (ipr_is_gata(res)) {
3541                 cmd_pkt->cdb[2] = IPR_ATA_PHY_RESET;
3542                 ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(regs->flags));
3543                 regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
3544         }
3545
3546         ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
3547         ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3548         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3549         if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET)
3550                 memcpy(&res->sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
3551                        sizeof(struct ipr_ioasa_gata));
3552
3553         LEAVE;
3554         return (IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0);
3555 }
3556
3557 /**
3558  * ipr_sata_reset - Reset the SATA port
3559  * @ap:         SATA port to reset
3560  * @classes:    class of the attached device
3561  *
3562  * This function issues a SATA phy reset to the affected ATA port.
3563  *
3564  * Return value:
3565  *      0 on success / non-zero on failure
3566  **/
3567 static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes)
3568 {
3569         struct ipr_sata_port *sata_port = ap->private_data;
3570         struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
3571         struct ipr_resource_entry *res;
3572         unsigned long lock_flags = 0;
3573         int rc = -ENXIO;
3574
3575         ENTER;
3576         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3577         res = sata_port->res;
3578         if (res) {
3579                 rc = ipr_device_reset(ioa_cfg, res);
3580                 switch(res->cfgte.proto) {
3581                 case IPR_PROTO_SATA:
3582                 case IPR_PROTO_SAS_STP:
3583                         *classes = ATA_DEV_ATA;
3584                         break;
3585                 case IPR_PROTO_SATA_ATAPI:
3586                 case IPR_PROTO_SAS_STP_ATAPI:
3587                         *classes = ATA_DEV_ATAPI;
3588                         break;
3589                 default:
3590                         *classes = ATA_DEV_UNKNOWN;
3591                         break;
3592                 };
3593         }
3594
3595         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3596         LEAVE;
3597         return rc;
3598 }
3599
3600 /**
3601  * ipr_eh_dev_reset - Reset the device
3602  * @scsi_cmd:   scsi command struct
3603  *
3604  * This function issues a device reset to the affected device.
3605  * A LUN reset will be sent to the device first. If that does
3606  * not work, a target reset will be sent.
3607  *
3608  * Return value:
3609  *      SUCCESS / FAILED
3610  **/
3611 static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
3612 {
3613         struct ipr_cmnd *ipr_cmd;
3614         struct ipr_ioa_cfg *ioa_cfg;
3615         struct ipr_resource_entry *res;
3616         struct ata_port *ap;
3617         int rc = 0;
3618
3619         ENTER;
3620         ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
3621         res = scsi_cmd->device->hostdata;
3622
3623         if (!res)
3624                 return FAILED;
3625
3626         /*
3627          * If we are currently going through reset/reload, return failed. This will force the
3628          * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the
3629          * reset to complete
3630          */
3631         if (ioa_cfg->in_reset_reload)
3632                 return FAILED;
3633         if (ioa_cfg->ioa_is_dead)
3634                 return FAILED;
3635
3636         list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
3637                 if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
3638                         if (ipr_cmd->scsi_cmd)
3639                                 ipr_cmd->done = ipr_scsi_eh_done;
3640                 }
3641         }
3642
3643         res->resetting_device = 1;
3644         scmd_printk(KERN_ERR, scsi_cmd, "Resetting device\n");
3645
3646         if (ipr_is_gata(res) && res->sata_port) {
3647                 ap = res->sata_port->ap;
3648                 spin_unlock_irq(scsi_cmd->device->host->host_lock);
3649                 ata_do_eh(ap, NULL, NULL, ipr_sata_reset, NULL);
3650                 spin_lock_irq(scsi_cmd->device->host->host_lock);
3651         } else
3652                 rc = ipr_device_reset(ioa_cfg, res);
3653         res->resetting_device = 0;
3654
3655         LEAVE;
3656         return (rc ? FAILED : SUCCESS);
3657 }
3658
3659 static int ipr_eh_dev_reset(struct scsi_cmnd * cmd)
3660 {
3661         int rc;
3662
3663         spin_lock_irq(cmd->device->host->host_lock);
3664         rc = __ipr_eh_dev_reset(cmd);
3665         spin_unlock_irq(cmd->device->host->host_lock);
3666
3667         return rc;
3668 }
3669
3670 /**
3671  * ipr_bus_reset_done - Op done function for bus reset.
3672  * @ipr_cmd:    ipr command struct
3673  *
3674  * This function is the op done function for a bus reset
3675  *
3676  * Return value:
3677  *      none
3678  **/
3679 static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
3680 {
3681         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3682         struct ipr_resource_entry *res;
3683
3684         ENTER;
3685         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3686                 if (!memcmp(&res->cfgte.res_handle, &ipr_cmd->ioarcb.res_handle,
3687                             sizeof(res->cfgte.res_handle))) {
3688                         scsi_report_bus_reset(ioa_cfg->host, res->cfgte.res_addr.bus);
3689                         break;
3690                 }
3691         }
3692
3693         /*
3694          * If abort has not completed, indicate the reset has, else call the
3695          * abort's done function to wake the sleeping eh thread
3696          */
3697         if (ipr_cmd->sibling->sibling)
3698                 ipr_cmd->sibling->sibling = NULL;
3699         else
3700                 ipr_cmd->sibling->done(ipr_cmd->sibling);
3701
3702         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3703         LEAVE;
3704 }
3705
3706 /**
3707  * ipr_abort_timeout - An abort task has timed out
3708  * @ipr_cmd:    ipr command struct
3709  *
3710  * This function handles when an abort task times out. If this
3711  * happens we issue a bus reset since we have resources tied
3712  * up that must be freed before returning to the midlayer.
3713  *
3714  * Return value:
3715  *      none
3716  **/
3717 static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd)
3718 {
3719         struct ipr_cmnd *reset_cmd;
3720         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3721         struct ipr_cmd_pkt *cmd_pkt;
3722         unsigned long lock_flags = 0;
3723
3724         ENTER;
3725         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3726         if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) {
3727                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3728                 return;
3729         }
3730
3731         sdev_printk(KERN_ERR, ipr_cmd->u.sdev, "Abort timed out. Resetting bus.\n");
3732         reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3733         ipr_cmd->sibling = reset_cmd;
3734         reset_cmd->sibling = ipr_cmd;
3735         reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle;
3736         cmd_pkt = &reset_cmd->ioarcb.cmd_pkt;
3737         cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3738         cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
3739         cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET;
3740
3741         ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
3742         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3743         LEAVE;
3744 }
3745
3746 /**
3747  * ipr_cancel_op - Cancel specified op
3748  * @scsi_cmd:   scsi command struct
3749  *
3750  * This function cancels specified op.
3751  *
3752  * Return value:
3753  *      SUCCESS / FAILED
3754  **/
3755 static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
3756 {
3757         struct ipr_cmnd *ipr_cmd;
3758         struct ipr_ioa_cfg *ioa_cfg;
3759         struct ipr_resource_entry *res;
3760         struct ipr_cmd_pkt *cmd_pkt;
3761         u32 ioasc;
3762         int op_found = 0;
3763
3764         ENTER;
3765         ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
3766         res = scsi_cmd->device->hostdata;
3767
3768         /* If we are currently going through reset/reload, return failed.
3769          * This will force the mid-layer to call ipr_eh_host_reset,
3770          * which will then go to sleep and wait for the reset to complete
3771          */
3772         if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
3773                 return FAILED;
3774         if (!res || (!ipr_is_gscsi(res) && !ipr_is_vset_device(res)))
3775                 return FAILED;
3776
3777         list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
3778                 if (ipr_cmd->scsi_cmd == scsi_cmd) {
3779                         ipr_cmd->done = ipr_scsi_eh_done;
3780                         op_found = 1;
3781                         break;
3782                 }
3783         }
3784
3785         if (!op_found)
3786                 return SUCCESS;
3787
3788         ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3789         ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
3790         cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
3791         cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3792         cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
3793         ipr_cmd->u.sdev = scsi_cmd->device;
3794
3795         scmd_printk(KERN_ERR, scsi_cmd, "Aborting command: %02X\n",
3796                     scsi_cmd->cmnd[0]);
3797         ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT);
3798         ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3799
3800         /*
3801          * If the abort task timed out and we sent a bus reset, we will get
3802          * one the following responses to the abort
3803          */
3804         if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) {
3805                 ioasc = 0;
3806                 ipr_trace;
3807         }
3808
3809         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3810         if (!ipr_is_naca_model(res))
3811                 res->needs_sync_complete = 1;
3812
3813         LEAVE;
3814         return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
3815 }
3816
3817 /**
3818  * ipr_eh_abort - Abort a single op
3819  * @scsi_cmd:   scsi command struct
3820  *
3821  * Return value:
3822  *      SUCCESS / FAILED
3823  **/
3824 static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd)
3825 {
3826         unsigned long flags;
3827         int rc;
3828
3829         ENTER;
3830
3831         spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
3832         rc = ipr_cancel_op(scsi_cmd);
3833         spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
3834
3835         LEAVE;
3836         return rc;
3837 }
3838
3839 /**
3840  * ipr_handle_other_interrupt - Handle "other" interrupts
3841  * @ioa_cfg:    ioa config struct
3842  * @int_reg:    interrupt register
3843  *
3844  * Return value:
3845  *      IRQ_NONE / IRQ_HANDLED
3846  **/
3847 static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
3848                                               volatile u32 int_reg)
3849 {
3850         irqreturn_t rc = IRQ_HANDLED;
3851
3852         if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
3853                 /* Mask the interrupt */
3854                 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg);
3855
3856                 /* Clear the interrupt */
3857                 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg);
3858                 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
3859
3860                 list_del(&ioa_cfg->reset_cmd->queue);
3861                 del_timer(&ioa_cfg->reset_cmd->timer);
3862                 ipr_reset_ioa_job(ioa_cfg->reset_cmd);
3863         } else {
3864                 if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
3865                         ioa_cfg->ioa_unit_checked = 1;
3866                 else
3867                         dev_err(&ioa_cfg->pdev->dev,
3868                                 "Permanent IOA failure. 0x%08X\n", int_reg);
3869
3870                 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3871                         ioa_cfg->sdt_state = GET_DUMP;
3872
3873                 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
3874                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
3875         }
3876
3877         return rc;
3878 }
3879
3880 /**
3881  * ipr_isr - Interrupt service routine
3882  * @irq:        irq number
3883  * @devp:       pointer to ioa config struct
3884  *
3885  * Return value:
3886  *      IRQ_NONE / IRQ_HANDLED
3887  **/
3888 static irqreturn_t ipr_isr(int irq, void *devp)
3889 {
3890         struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
3891         unsigned long lock_flags = 0;
3892         volatile u32 int_reg, int_mask_reg;
3893         u32 ioasc;
3894         u16 cmd_index;
3895         struct ipr_cmnd *ipr_cmd;
3896         irqreturn_t rc = IRQ_NONE;
3897
3898         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3899
3900         /* If interrupts are disabled, ignore the interrupt */
3901         if (!ioa_cfg->allow_interrupts) {
3902                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3903                 return IRQ_NONE;
3904         }
3905
3906         int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
3907         int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
3908
3909         /* If an interrupt on the adapter did not occur, ignore it */
3910         if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
3911                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3912                 return IRQ_NONE;
3913         }
3914
3915         while (1) {
3916                 ipr_cmd = NULL;
3917
3918                 while ((be32_to_cpu(*ioa_cfg->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) ==
3919                        ioa_cfg->toggle_bit) {
3920
3921                         cmd_index = (be32_to_cpu(*ioa_cfg->hrrq_curr) &
3922                                      IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
3923
3924                         if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
3925                                 ioa_cfg->errors_logged++;
3926                                 dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n");
3927
3928                                 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3929                                         ioa_cfg->sdt_state = GET_DUMP;
3930
3931                                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
3932                                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3933                                 return IRQ_HANDLED;
3934                         }
3935
3936                         ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index];
3937
3938                         ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3939
3940                         ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc);
3941
3942                         list_del(&ipr_cmd->queue);
3943                         del_timer(&ipr_cmd->timer);
3944                         ipr_cmd->done(ipr_cmd);
3945
3946                         rc = IRQ_HANDLED;
3947
3948                         if (ioa_cfg->hrrq_curr < ioa_cfg->hrrq_end) {
3949                                 ioa_cfg->hrrq_curr++;
3950                         } else {
3951                                 ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
3952                                 ioa_cfg->toggle_bit ^= 1u;
3953                         }
3954                 }
3955
3956                 if (ipr_cmd != NULL) {
3957                         /* Clear the PCI interrupt */
3958                         writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
3959                         int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
3960                 } else
3961                         break;
3962         }
3963
3964         if (unlikely(rc == IRQ_NONE))
3965                 rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);
3966
3967         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3968         return rc;
3969 }
3970
3971 /**
3972  * ipr_build_ioadl - Build a scatter/gather list and map the buffer
3973  * @ioa_cfg:    ioa config struct
3974  * @ipr_cmd:    ipr command struct
3975  *
3976  * Return value:
3977  *      0 on success / -1 on failure
3978  **/
3979 static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
3980                            struct ipr_cmnd *ipr_cmd)
3981 {
3982         int i;
3983         struct scatterlist *sglist;
3984         u32 length;
3985         u32 ioadl_flags = 0;
3986         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3987         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
3988         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
3989
3990         length = scsi_cmd->request_bufflen;
3991
3992         if (length == 0)
3993                 return 0;
3994
3995         if (scsi_cmd->use_sg) {
3996                 ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev,
3997                                                  scsi_cmd->request_buffer,
3998                                                  scsi_cmd->use_sg,
3999                                                  scsi_cmd->sc_data_direction);
4000
4001                 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
4002                         ioadl_flags = IPR_IOADL_FLAGS_WRITE;
4003                         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4004                         ioarcb->write_data_transfer_length = cpu_to_be32(length);
4005                         ioarcb->write_ioadl_len =
4006                                 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4007                 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
4008                         ioadl_flags = IPR_IOADL_FLAGS_READ;
4009                         ioarcb->read_data_transfer_length = cpu_to_be32(length);
4010                         ioarcb->read_ioadl_len =
4011                                 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4012                 }
4013
4014                 sglist = scsi_cmd->request_buffer;
4015
4016                 for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
4017                         ioadl[i].flags_and_data_len =
4018                                 cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i]));
4019                         ioadl[i].address =
4020                                 cpu_to_be32(sg_dma_address(&sglist[i]));
4021                 }
4022
4023                 if (likely(ipr_cmd->dma_use_sg)) {
4024                         ioadl[i-1].flags_and_data_len |=
4025                                 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
4026                         return 0;
4027                 } else
4028                         dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
4029         } else {
4030                 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
4031                         ioadl_flags = IPR_IOADL_FLAGS_WRITE;
4032                         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4033                         ioarcb->write_data_transfer_length = cpu_to_be32(length);
4034                         ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4035                 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
4036                         ioadl_flags = IPR_IOADL_FLAGS_READ;
4037                         ioarcb->read_data_transfer_length = cpu_to_be32(length);
4038                         ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4039                 }
4040
4041                 ipr_cmd->dma_handle = pci_map_single(ioa_cfg->pdev,
4042                                                      scsi_cmd->request_buffer, length,
4043                                                      scsi_cmd->sc_data_direction);
4044
4045                 if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) {
4046                         ipr_cmd->dma_use_sg = 1;
4047                         ioadl[0].flags_and_data_len =
4048                                 cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST);
4049                         ioadl[0].address = cpu_to_be32(ipr_cmd->dma_handle);
4050                         return 0;
4051                 } else
4052                         dev_err(&ioa_cfg->pdev->dev, "pci_map_single failed!\n");
4053         }
4054
4055         return -1;
4056 }
4057
4058 /**
4059  * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
4060  * @scsi_cmd:   scsi command struct
4061  *
4062  * Return value:
4063  *      task attributes
4064  **/
4065 static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd)
4066 {
4067         u8 tag[2];
4068         u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK;
4069
4070         if (scsi_populate_tag_msg(scsi_cmd, tag)) {
4071                 switch (tag[0]) {
4072                 case MSG_SIMPLE_TAG:
4073                         rc = IPR_FLAGS_LO_SIMPLE_TASK;
4074                         break;
4075                 case MSG_HEAD_TAG:
4076                         rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK;
4077                         break;
4078                 case MSG_ORDERED_TAG:
4079                         rc = IPR_FLAGS_LO_ORDERED_TASK;
4080                         break;
4081                 };
4082         }
4083
4084         return rc;
4085 }
4086
4087 /**
4088  * ipr_erp_done - Process completion of ERP for a device
4089  * @ipr_cmd:            ipr command struct
4090  *
4091  * This function copies the sense buffer into the scsi_cmd
4092  * struct and pushes the scsi_done function.
4093  *
4094  * Return value:
4095  *      nothing
4096  **/
4097 static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
4098 {
4099         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4100         struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4101         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4102         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4103
4104         if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
4105                 scsi_cmd->result |= (DID_ERROR << 16);
4106                 scmd_printk(KERN_ERR, scsi_cmd,
4107                             "Request Sense failed with IOASC: 0x%08X\n", ioasc);
4108         } else {
4109                 memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer,
4110                        SCSI_SENSE_BUFFERSIZE);
4111         }
4112
4113         if (res) {
4114                 if (!ipr_is_naca_model(res))
4115                         res->needs_sync_complete = 1;
4116                 res->in_erp = 0;
4117         }
4118         ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4119         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4120         scsi_cmd->scsi_done(scsi_cmd);
4121 }
4122
4123 /**
4124  * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP
4125  * @ipr_cmd:    ipr command struct
4126  *
4127  * Return value:
4128  *      none
4129  **/
4130 static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
4131 {
4132         struct ipr_ioarcb *ioarcb;
4133         struct ipr_ioasa *ioasa;
4134
4135         ioarcb = &ipr_cmd->ioarcb;
4136         ioasa = &ipr_cmd->ioasa;
4137
4138         memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
4139         ioarcb->write_data_transfer_length = 0;
4140         ioarcb->read_data_transfer_length = 0;
4141         ioarcb->write_ioadl_len = 0;
4142         ioarcb->read_ioadl_len = 0;
4143         ioasa->ioasc = 0;
4144         ioasa->residual_data_len = 0;
4145 }
4146
4147 /**
4148  * ipr_erp_request_sense - Send request sense to a device
4149  * @ipr_cmd:    ipr command struct
4150  *
4151  * This function sends a request sense to a device as a result
4152  * of a check condition.
4153  *
4154  * Return value:
4155  *      nothing
4156  **/
4157 static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
4158 {
4159         struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
4160         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4161
4162         if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
4163                 ipr_erp_done(ipr_cmd);
4164                 return;
4165         }
4166
4167         ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
4168
4169         cmd_pkt->request_type = IPR_RQTYPE_SCSICDB;
4170         cmd_pkt->cdb[0] = REQUEST_SENSE;
4171         cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE;
4172         cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE;
4173         cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
4174         cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ);
4175
4176         ipr_cmd->ioadl[0].flags_and_data_len =
4177                 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | SCSI_SENSE_BUFFERSIZE);
4178         ipr_cmd->ioadl[0].address =
4179                 cpu_to_be32(ipr_cmd->sense_buffer_dma);
4180
4181         ipr_cmd->ioarcb.read_ioadl_len =
4182                 cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4183         ipr_cmd->ioarcb.read_data_transfer_length =
4184                 cpu_to_be32(SCSI_SENSE_BUFFERSIZE);
4185
4186         ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout,
4187                    IPR_REQUEST_SENSE_TIMEOUT * 2);
4188 }
4189
4190 /**
4191  * ipr_erp_cancel_all - Send cancel all to a device
4192  * @ipr_cmd:    ipr command struct
4193  *
4194  * This function sends a cancel all to a device to clear the
4195  * queue. If we are running TCQ on the device, QERR is set to 1,
4196  * which means all outstanding ops have been dropped on the floor.
4197  * Cancel all will return them to us.
4198  *
4199  * Return value:
4200  *      nothing
4201  **/
4202 static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd)
4203 {
4204         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4205         struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4206         struct ipr_cmd_pkt *cmd_pkt;
4207
4208         res->in_erp = 1;
4209
4210         ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
4211
4212         if (!scsi_get_tag_type(scsi_cmd->device)) {
4213                 ipr_erp_request_sense(ipr_cmd);
4214                 return;
4215         }
4216
4217         cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
4218         cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
4219         cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
4220
4221         ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout,
4222                    IPR_CANCEL_ALL_TIMEOUT);
4223 }
4224
4225 /**
4226  * ipr_dump_ioasa - Dump contents of IOASA
4227  * @ioa_cfg:    ioa config struct
4228  * @ipr_cmd:    ipr command struct
4229  * @res:                resource entry struct
4230  *
4231  * This function is invoked by the interrupt handler when ops
4232  * fail. It will log the IOASA if appropriate. Only called
4233  * for GPDD ops.
4234  *
4235  * Return value:
4236  *      none
4237  **/
4238 static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
4239                            struct ipr_cmnd *ipr_cmd, struct ipr_resource_entry *res)
4240 {
4241         int i;
4242         u16 data_len;
4243         u32 ioasc;
4244         struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4245         __be32 *ioasa_data = (__be32 *)ioasa;
4246         int error_index;
4247
4248         ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
4249
4250         if (0 == ioasc)
4251                 return;
4252
4253         if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
4254                 return;
4255
4256         error_index = ipr_get_error(ioasc);
4257
4258         if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
4259                 /* Don't log an error if the IOA already logged one */
4260                 if (ioasa->ilid != 0)
4261                         return;
4262
4263                 if (ipr_error_table[error_index].log_ioasa == 0)
4264                         return;
4265         }
4266
4267         ipr_res_err(ioa_cfg, res, "%s\n", ipr_error_table[error_index].error);
4268
4269         if (sizeof(struct ipr_ioasa) < be16_to_cpu(ioasa->ret_stat_len))
4270                 data_len = sizeof(struct ipr_ioasa);
4271         else
4272                 data_len = be16_to_cpu(ioasa->ret_stat_len);
4273
4274         ipr_err("IOASA Dump:\n");
4275
4276         for (i = 0; i < data_len / 4; i += 4) {
4277                 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
4278                         be32_to_cpu(ioasa_data[i]),
4279                         be32_to_cpu(ioasa_data[i+1]),
4280                         be32_to_cpu(ioasa_data[i+2]),
4281                         be32_to_cpu(ioasa_data[i+3]));
4282         }
4283 }
4284
4285 /**
4286  * ipr_gen_sense - Generate SCSI sense data from an IOASA
4287  * @ioasa:              IOASA
4288  * @sense_buf:  sense data buffer
4289  *
4290  * Return value:
4291  *      none
4292  **/
4293 static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd)
4294 {
4295         u32 failing_lba;
4296         u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer;
4297         struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata;
4298         struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4299         u32 ioasc = be32_to_cpu(ioasa->ioasc);
4300
4301         memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
4302
4303         if (ioasc >= IPR_FIRST_DRIVER_IOASC)
4304                 return;
4305
4306         ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION;
4307
4308         if (ipr_is_vset_device(res) &&
4309             ioasc == IPR_IOASC_MED_DO_NOT_REALLOC &&
4310             ioasa->u.vset.failing_lba_hi != 0) {
4311                 sense_buf[0] = 0x72;
4312                 sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc);
4313                 sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc);
4314                 sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc);
4315
4316                 sense_buf[7] = 12;
4317                 sense_buf[8] = 0;
4318                 sense_buf[9] = 0x0A;
4319                 sense_buf[10] = 0x80;
4320
4321                 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi);
4322
4323                 sense_buf[12] = (failing_lba & 0xff000000) >> 24;
4324                 sense_buf[13] = (failing_lba & 0x00ff0000) >> 16;
4325                 sense_buf[14] = (failing_lba & 0x0000ff00) >> 8;
4326                 sense_buf[15] = failing_lba & 0x000000ff;
4327
4328                 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
4329
4330                 sense_buf[16] = (failing_lba & 0xff000000) >> 24;
4331                 sense_buf[17] = (failing_lba & 0x00ff0000) >> 16;
4332                 sense_buf[18] = (failing_lba & 0x0000ff00) >> 8;
4333                 sense_buf[19] = failing_lba & 0x000000ff;
4334         } else {
4335                 sense_buf[0] = 0x70;
4336                 sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc);
4337                 sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc);
4338                 sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc);
4339
4340                 /* Illegal request */
4341                 if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) &&
4342                     (be32_to_cpu(ioasa->ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
4343                         sense_buf[7] = 10;      /* additional length */
4344
4345                         /* IOARCB was in error */
4346                         if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24)
4347                                 sense_buf[15] = 0xC0;
4348                         else    /* Parameter data was invalid */
4349                                 sense_buf[15] = 0x80;
4350
4351                         sense_buf[16] =
4352                             ((IPR_FIELD_POINTER_MASK &
4353                               be32_to_cpu(ioasa->ioasc_specific)) >> 8) & 0xff;
4354                         sense_buf[17] =
4355                             (IPR_FIELD_POINTER_MASK &
4356                              be32_to_cpu(ioasa->ioasc_specific)) & 0xff;
4357                 } else {
4358                         if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) {
4359                                 if (ipr_is_vset_device(res))
4360                                         failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
4361                                 else
4362                                         failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba);
4363
4364                                 sense_buf[0] |= 0x80;   /* Or in the Valid bit */
4365                                 sense_buf[3] = (failing_lba & 0xff000000) >> 24;
4366                                 sense_buf[4] = (failing_lba & 0x00ff0000) >> 16;
4367                                 sense_buf[5] = (failing_lba & 0x0000ff00) >> 8;
4368                                 sense_buf[6] = failing_lba & 0x000000ff;
4369                         }
4370
4371                         sense_buf[7] = 6;       /* additional length */
4372                 }
4373         }
4374 }
4375
4376 /**
4377  * ipr_get_autosense - Copy autosense data to sense buffer
4378  * @ipr_cmd:    ipr command struct
4379  *
4380  * This function copies the autosense buffer to the buffer
4381  * in the scsi_cmd, if there is autosense available.
4382  *
4383  * Return value:
4384  *      1 if autosense was available / 0 if not
4385  **/
4386 static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
4387 {
4388         struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4389
4390         if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
4391                 return 0;
4392
4393         memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
4394                min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
4395                    SCSI_SENSE_BUFFERSIZE));
4396         return 1;
4397 }
4398
4399 /**
4400  * ipr_erp_start - Process an error response for a SCSI op
4401  * @ioa_cfg:    ioa config struct
4402  * @ipr_cmd:    ipr command struct
4403  *
4404  * This function determines whether or not to initiate ERP
4405  * on the affected device.
4406  *
4407  * Return value:
4408  *      nothing
4409  **/
4410 static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
4411                               struct ipr_cmnd *ipr_cmd)
4412 {
4413         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4414         struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4415         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4416
4417         if (!res) {
4418                 ipr_scsi_eh_done(ipr_cmd);
4419                 return;
4420         }
4421
4422         if (ipr_is_gscsi(res))
4423                 ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
4424         else
4425                 ipr_gen_sense(ipr_cmd);
4426
4427         switch (ioasc & IPR_IOASC_IOASC_MASK) {
4428         case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
4429                 if (ipr_is_naca_model(res))
4430                         scsi_cmd->result |= (DID_ABORT << 16);
4431                 else
4432                         scsi_cmd->result |= (DID_IMM_RETRY << 16);
4433                 break;
4434         case IPR_IOASC_IR_RESOURCE_HANDLE:
4435         case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA:
4436                 scsi_cmd->result |= (DID_NO_CONNECT << 16);
4437                 break;
4438         case IPR_IOASC_HW_SEL_TIMEOUT:
4439                 scsi_cmd->result |= (DID_NO_CONNECT << 16);
4440                 if (!ipr_is_naca_model(res))
4441                         res->needs_sync_complete = 1;
4442                 break;
4443         case IPR_IOASC_SYNC_REQUIRED:
4444                 if (!res->in_erp)
4445                         res->needs_sync_complete = 1;
4446                 scsi_cmd->result |= (DID_IMM_RETRY << 16);
4447                 break;
4448         case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */
4449         case IPR_IOASA_IR_DUAL_IOA_DISABLED:
4450                 scsi_cmd->result |= (DID_PASSTHROUGH << 16);
4451                 break;
4452         case IPR_IOASC_BUS_WAS_RESET:
4453         case IPR_IOASC_BUS_WAS_RESET_BY_OTHER:
4454                 /*
4455                  * Report the bus reset and ask for a retry. The device
4456                  * will give CC/UA the next command.
4457                  */
4458                 if (!res->resetting_device)
4459                         scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
4460                 scsi_cmd->result |= (DID_ERROR << 16);
4461                 if (!ipr_is_naca_model(res))
4462                         res->needs_sync_complete = 1;
4463                 break;
4464         case IPR_IOASC_HW_DEV_BUS_STATUS:
4465                 scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
4466                 if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
4467                         if (!ipr_get_autosense(ipr_cmd)) {
4468                                 if (!ipr_is_naca_model(res)) {
4469                                         ipr_erp_cancel_all(ipr_cmd);
4470                                         return;
4471                                 }
4472                         }
4473                 }
4474                 if (!ipr_is_naca_model(res))
4475                         res->needs_sync_complete = 1;
4476                 break;
4477         case IPR_IOASC_NR_INIT_CMD_REQUIRED:
4478                 break;
4479         default:
4480                 if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
4481                         scsi_cmd->result |= (DID_ERROR << 16);
4482                 if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
4483                         res->needs_sync_complete = 1;
4484                 break;
4485         }
4486
4487         ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4488         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4489         scsi_cmd->scsi_done(scsi_cmd);
4490 }
4491
4492 /**
4493  * ipr_scsi_done - mid-layer done function
4494  * @ipr_cmd:    ipr command struct
4495  *
4496  * This function is invoked by the interrupt handler for
4497  * ops generated by the SCSI mid-layer
4498  *
4499  * Return value:
4500  *      none
4501  **/
4502 static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
4503 {
4504         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4505         struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4506         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4507
4508         scsi_cmd->resid = be32_to_cpu(ipr_cmd->ioasa.residual_data_len);
4509
4510         if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
4511                 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4512                 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4513                 scsi_cmd->scsi_done(scsi_cmd);
4514         } else
4515                 ipr_erp_start(ioa_cfg, ipr_cmd);
4516 }
4517
4518 /**
4519  * ipr_queuecommand - Queue a mid-layer request
4520  * @scsi_cmd:   scsi command struct
4521  * @done:               done function
4522  *
4523  * This function queues a request generated by the mid-layer.
4524  *
4525  * Return value:
4526  *      0 on success
4527  *      SCSI_MLQUEUE_DEVICE_BUSY if device is busy
4528  *      SCSI_MLQUEUE_HOST_BUSY if host is busy
4529  **/
4530 static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
4531                             void (*done) (struct scsi_cmnd *))
4532 {
4533         struct ipr_ioa_cfg *ioa_cfg;
4534         struct ipr_resource_entry *res;
4535         struct ipr_ioarcb *ioarcb;
4536         struct ipr_cmnd *ipr_cmd;
4537         int rc = 0;
4538
4539         scsi_cmd->scsi_done = done;
4540         ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
4541         res = scsi_cmd->device->hostdata;
4542         scsi_cmd->result = (DID_OK << 16);
4543
4544         /*
4545          * We are currently blocking all devices due to a host reset
4546          * We have told the host to stop giving us new requests, but
4547          * ERP ops don't count. FIXME
4548          */
4549         if (unlikely(!ioa_cfg->allow_cmds && !ioa_cfg->ioa_is_dead))
4550                 return SCSI_MLQUEUE_HOST_BUSY;
4551
4552         /*
4553          * FIXME - Create scsi_set_host_offline interface
4554          *  and the ioa_is_dead check can be removed
4555          */
4556         if (unlikely(ioa_cfg->ioa_is_dead || !res)) {
4557                 memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
4558                 scsi_cmd->result = (DID_NO_CONNECT << 16);
4559                 scsi_cmd->scsi_done(scsi_cmd);
4560                 return 0;
4561         }
4562
4563         if (ipr_is_gata(res) && res->sata_port)
4564                 return ata_sas_queuecmd(scsi_cmd, done, res->sata_port->ap);
4565
4566         ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
4567         ioarcb = &ipr_cmd->ioarcb;
4568         list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
4569
4570         memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
4571         ipr_cmd->scsi_cmd = scsi_cmd;
4572         ioarcb->res_handle = res->cfgte.res_handle;
4573         ipr_cmd->done = ipr_scsi_done;
4574         ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
4575
4576         if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
4577                 if (scsi_cmd->underflow == 0)
4578                         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
4579
4580                 if (res->needs_sync_complete) {
4581                         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE;
4582                         res->needs_sync_complete = 0;
4583                 }
4584
4585                 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
4586                 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
4587                 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
4588                 ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
4589         }
4590
4591         if (scsi_cmd->cmnd[0] >= 0xC0 &&
4592             (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
4593                 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
4594
4595         if (likely(rc == 0))
4596                 rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
4597
4598         if (likely(rc == 0)) {
4599                 mb();
4600                 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
4601                        ioa_cfg->regs.ioarrin_reg);
4602         } else {
4603                  list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4604                  return SCSI_MLQUEUE_HOST_BUSY;
4605         }
4606
4607         return 0;
4608 }
4609
4610 /**
4611  * ipr_ioctl - IOCTL handler
4612  * @sdev:       scsi device struct
4613  * @cmd:        IOCTL cmd
4614  * @arg:        IOCTL arg
4615  *
4616  * Return value:
4617  *      0 on success / other on failure
4618  **/
4619 int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
4620 {
4621         struct ipr_resource_entry *res;
4622
4623         res = (struct ipr_resource_entry *)sdev->hostdata;
4624         if (res && ipr_is_gata(res))
4625                 return ata_scsi_ioctl(sdev, cmd, arg);
4626
4627         return -EINVAL;
4628 }
4629
4630 /**
4631  * ipr_info - Get information about the card/driver
4632  * @scsi_host:  scsi host struct
4633  *
4634  * Return value:
4635  *      pointer to buffer with description string
4636  **/
4637 static const char * ipr_ioa_info(struct Scsi_Host *host)
4638 {
4639         static char buffer[512];
4640         struct ipr_ioa_cfg *ioa_cfg;
4641         unsigned long lock_flags = 0;
4642
4643         ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata;
4644
4645         spin_lock_irqsave(host->host_lock, lock_flags);
4646         sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type);
4647         spin_unlock_irqrestore(host->host_lock, lock_flags);
4648
4649         return buffer;
4650 }
4651
4652 /**
4653  * ipr_scsi_timed_out - Handle scsi command timeout
4654  * @scsi_cmd:   scsi command struct
4655  *
4656  * Return value:
4657  *      EH_NOT_HANDLED
4658  **/
4659 enum scsi_eh_timer_return ipr_scsi_timed_out(struct scsi_cmnd *scsi_cmd)
4660 {
4661         struct ipr_ioa_cfg *ioa_cfg;
4662         struct ipr_cmnd *ipr_cmd;
4663         unsigned long flags;
4664
4665         ENTER;
4666         spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
4667         ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
4668
4669         list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
4670                 if (ipr_cmd->qc && ipr_cmd->qc->scsicmd == scsi_cmd) {
4671                         ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT;
4672                         ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED;
4673                         break;
4674                 }
4675         }
4676
4677         spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
4678         LEAVE;
4679         return EH_NOT_HANDLED;
4680 }
4681
4682 static struct scsi_transport_template ipr_transport_template = {
4683         .eh_timed_out = ipr_scsi_timed_out
4684 };
4685
4686 static struct scsi_host_template driver_template = {
4687         .module = THIS_MODULE,
4688         .name = "IPR",
4689         .info = ipr_ioa_info,
4690         .ioctl = ipr_ioctl,
4691         .queuecommand = ipr_queuecommand,
4692         .eh_abort_handler = ipr_eh_abort,
4693         .eh_device_reset_handler = ipr_eh_dev_reset,
4694         .eh_host_reset_handler = ipr_eh_host_reset,
4695         .slave_alloc = ipr_slave_alloc,
4696         .slave_configure = ipr_slave_configure,
4697         .slave_destroy = ipr_slave_destroy,
4698         .target_alloc = ipr_target_alloc,
4699         .target_destroy = ipr_target_destroy,
4700         .change_queue_depth = ipr_change_queue_depth,
4701         .change_queue_type = ipr_change_queue_type,
4702         .bios_param = ipr_biosparam,
4703         .can_queue = IPR_MAX_COMMANDS,
4704         .this_id = -1,
4705         .sg_tablesize = IPR_MAX_SGLIST,
4706         .max_sectors = IPR_IOA_MAX_SECTORS,
4707         .cmd_per_lun = IPR_MAX_CMD_PER_LUN,
4708         .use_clustering = ENABLE_CLUSTERING,
4709         .shost_attrs = ipr_ioa_attrs,
4710         .sdev_attrs = ipr_dev_attrs,
4711         .proc_name = IPR_NAME
4712 };
4713
4714 /**
4715  * ipr_ata_phy_reset - libata phy_reset handler
4716  * @ap:         ata port to reset
4717  *
4718  **/
4719 static void ipr_ata_phy_reset(struct ata_port *ap)
4720 {
4721         unsigned long flags;
4722         struct ipr_sata_port *sata_port = ap->private_data;
4723         struct ipr_resource_entry *res = sata_port->res;
4724         struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
4725         int rc;
4726
4727         ENTER;
4728         spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4729         while(ioa_cfg->in_reset_reload) {
4730                 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4731                 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
4732                 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4733         }
4734
4735         if (!ioa_cfg->allow_cmds)
4736                 goto out_unlock;
4737
4738         rc = ipr_device_reset(ioa_cfg, res);
4739
4740         if (rc) {
4741                 ap->ops->port_disable(ap);
4742                 goto out_unlock;
4743         }
4744
4745         switch(res->cfgte.proto) {
4746         case IPR_PROTO_SATA:
4747         case IPR_PROTO_SAS_STP:
4748                 ap->device[0].class = ATA_DEV_ATA;
4749                 break;
4750         case IPR_PROTO_SATA_ATAPI:
4751         case IPR_PROTO_SAS_STP_ATAPI:
4752                 ap->device[0].class = ATA_DEV_ATAPI;
4753                 break;
4754         default:
4755                 ap->device[0].class = ATA_DEV_UNKNOWN;
4756                 ap->ops->port_disable(ap);
4757                 break;
4758         };
4759
4760 out_unlock:
4761         spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4762         LEAVE;
4763 }
4764
4765 /**
4766  * ipr_ata_post_internal - Cleanup after an internal command
4767  * @qc: ATA queued command
4768  *
4769  * Return value:
4770  *      none
4771  **/
4772 static void ipr_ata_post_internal(struct ata_queued_cmd *qc)
4773 {
4774         struct ipr_sata_port *sata_port = qc->ap->private_data;
4775         struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
4776         struct ipr_cmnd *ipr_cmd;
4777         unsigned long flags;
4778
4779         spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4780         list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
4781                 if (ipr_cmd->qc == qc) {
4782                         ipr_device_reset(ioa_cfg, sata_port->res);
4783                         break;
4784                 }
4785         }
4786         spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4787 }
4788
4789 /**
4790  * ipr_tf_read - Read the current ATA taskfile for the ATA port
4791  * @ap: ATA port
4792  * @tf: destination ATA taskfile
4793  *
4794  * Return value:
4795  *      none
4796  **/
4797 static void ipr_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
4798 {
4799         struct ipr_sata_port *sata_port = ap->private_data;
4800         struct ipr_ioasa_gata *g = &sata_port->ioasa;
4801
4802         tf->feature = g->error;
4803         tf->nsect = g->nsect;
4804         tf->lbal = g->lbal;
4805         tf->lbam = g->lbam;
4806         tf->lbah = g->lbah;
4807         tf->device = g->device;
4808         tf->command = g->status;
4809         tf->hob_nsect = g->hob_nsect;
4810         tf->hob_lbal = g->hob_lbal;
4811         tf->hob_lbam = g->hob_lbam;
4812         tf->hob_lbah = g->hob_lbah;
4813         tf->ctl = g->alt_status;
4814 }
4815
4816 /**
4817  * ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
4818  * @regs:       destination
4819  * @tf: source ATA taskfile
4820  *
4821  * Return value:
4822  *      none
4823  **/
4824 static void ipr_copy_sata_tf(struct ipr_ioarcb_ata_regs *regs,
4825                              struct ata_taskfile *tf)
4826 {
4827         regs->feature = tf->feature;
4828         regs->nsect = tf->nsect;
4829         regs->lbal = tf->lbal;
4830         regs->lbam = tf->lbam;
4831         regs->lbah = tf->lbah;
4832         regs->device = tf->device;
4833         regs->command = tf->command;
4834         regs->hob_feature = tf->hob_feature;
4835         regs->hob_nsect = tf->hob_nsect;
4836         regs->hob_lbal = tf->hob_lbal;
4837         regs->hob_lbam = tf->hob_lbam;
4838         regs->hob_lbah = tf->hob_lbah;
4839         regs->ctl = tf->ctl;
4840 }
4841
4842 /**
4843  * ipr_sata_done - done function for SATA commands
4844  * @ipr_cmd:    ipr command struct
4845  *
4846  * This function is invoked by the interrupt handler for
4847  * ops generated by the SCSI mid-layer to SATA devices
4848  *
4849  * Return value:
4850  *      none
4851  **/
4852 static void ipr_sata_done(struct ipr_cmnd *ipr_cmd)
4853 {
4854         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4855         struct ata_queued_cmd *qc = ipr_cmd->qc;
4856         struct ipr_sata_port *sata_port = qc->ap->private_data;
4857         struct ipr_resource_entry *res = sata_port->res;
4858         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4859
4860         memcpy(&sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
4861                sizeof(struct ipr_ioasa_gata));
4862         ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
4863
4864         if (be32_to_cpu(ipr_cmd->ioasa.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
4865                 scsi_report_device_reset(ioa_cfg->host, res->cfgte.res_addr.bus,
4866                                          res->cfgte.res_addr.target);
4867
4868         if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
4869                 qc->err_mask |= __ac_err_mask(ipr_cmd->ioasa.u.gata.status);
4870         else
4871                 qc->err_mask |= ac_err_mask(ipr_cmd->ioasa.u.gata.status);
4872         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4873         ata_qc_complete(qc);
4874 }
4875
4876 /**
4877  * ipr_build_ata_ioadl - Build an ATA scatter/gather list
4878  * @ipr_cmd:    ipr command struct
4879  * @qc:         ATA queued command
4880  *
4881  **/
4882 static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
4883                                 struct ata_queued_cmd *qc)
4884 {
4885         u32 ioadl_flags = 0;
4886         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4887         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4888         int len = qc->nbytes + qc->pad_len;
4889         struct scatterlist *sg;
4890
4891         if (len == 0)
4892                 return;
4893
4894         if (qc->dma_dir == DMA_TO_DEVICE) {
4895                 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
4896                 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4897                 ioarcb->write_data_transfer_length = cpu_to_be32(len);
4898                 ioarcb->write_ioadl_len =
4899                         cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4900         } else if (qc->dma_dir == DMA_FROM_DEVICE) {
4901                 ioadl_flags = IPR_IOADL_FLAGS_READ;
4902                 ioarcb->read_data_transfer_length = cpu_to_be32(len);
4903                 ioarcb->read_ioadl_len =
4904                         cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4905         }
4906
4907         ata_for_each_sg(sg, qc) {
4908                 ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
4909                 ioadl->address = cpu_to_be32(sg_dma_address(sg));
4910                 if (ata_sg_is_last(sg, qc))
4911                         ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
4912                 else
4913                         ioadl++;
4914         }
4915 }
4916
4917 /**
4918  * ipr_qc_issue - Issue a SATA qc to a device
4919  * @qc: queued command
4920  *
4921  * Return value:
4922  *      0 if success
4923  **/
4924 static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
4925 {
4926         struct ata_port *ap = qc->ap;
4927         struct ipr_sata_port *sata_port = ap->private_data;
4928         struct ipr_resource_entry *res = sata_port->res;
4929         struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
4930         struct ipr_cmnd *ipr_cmd;
4931         struct ipr_ioarcb *ioarcb;
4932         struct ipr_ioarcb_ata_regs *regs;
4933
4934         if (unlikely(!ioa_cfg->allow_cmds || ioa_cfg->ioa_is_dead))
4935                 return -EIO;
4936
4937         ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
4938         ioarcb = &ipr_cmd->ioarcb;
4939         regs = &ioarcb->add_data.u.regs;
4940
4941         memset(&ioarcb->add_data, 0, sizeof(ioarcb->add_data));
4942         ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(ioarcb->add_data.u.regs));
4943
4944         list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
4945         ipr_cmd->qc = qc;
4946         ipr_cmd->done = ipr_sata_done;
4947         ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
4948         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
4949         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
4950         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
4951         ipr_cmd->dma_use_sg = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
4952
4953         ipr_build_ata_ioadl(ipr_cmd, qc);
4954         regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
4955         ipr_copy_sata_tf(regs, &qc->tf);
4956         memcpy(ioarcb->cmd_pkt.cdb, qc->cdb, IPR_MAX_CDB_LEN);
4957         ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
4958
4959         switch (qc->tf.protocol) {
4960         case ATA_PROT_NODATA:
4961         case ATA_PROT_PIO:
4962                 break;
4963
4964         case ATA_PROT_DMA:
4965                 regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
4966                 break;
4967
4968         case ATA_PROT_ATAPI:
4969         case ATA_PROT_ATAPI_NODATA:
4970                 regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
4971                 break;
4972
4973         case ATA_PROT_ATAPI_DMA:
4974                 regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
4975                 regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
4976                 break;
4977
4978         default:
4979                 WARN_ON(1);
4980                 return -1;
4981         }
4982
4983         mb();
4984         writel(be32_to_cpu(ioarcb->ioarcb_host_pci_addr),
4985                ioa_cfg->regs.ioarrin_reg);
4986         return 0;
4987 }
4988
4989 /**
4990  * ipr_ata_check_status - Return last ATA status
4991  * @ap: ATA port
4992  *
4993  * Return value:
4994  *      ATA status
4995  **/
4996 static u8 ipr_ata_check_status(struct ata_port *ap)
4997 {
4998         struct ipr_sata_port *sata_port = ap->private_data;
4999         return sata_port->ioasa.status;
5000 }
5001
5002 /**
5003  * ipr_ata_check_altstatus - Return last ATA altstatus
5004  * @ap: ATA port
5005  *
5006  * Return value:
5007  *      Alt ATA status
5008  **/
5009 static u8 ipr_ata_check_altstatus(struct ata_port *ap)
5010 {
5011         struct ipr_sata_port *sata_port = ap->private_data;
5012         return sata_port->ioasa.alt_status;
5013 }
5014
5015 static struct ata_port_operations ipr_sata_ops = {
5016         .port_disable = ata_port_disable,
5017         .check_status = ipr_ata_check_status,
5018         .check_altstatus = ipr_ata_check_altstatus,
5019         .dev_select = ata_noop_dev_select,
5020         .phy_reset = ipr_ata_phy_reset,
5021         .post_internal_cmd = ipr_ata_post_internal,
5022         .tf_read = ipr_tf_read,
5023         .qc_prep = ata_noop_qc_prep,
5024         .qc_issue = ipr_qc_issue,
5025         .port_start = ata_sas_port_start,
5026         .port_stop = ata_sas_port_stop
5027 };
5028
5029 static struct ata_port_info sata_port_info = {
5030         .flags  = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
5031         ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
5032         .pio_mask       = 0x10, /* pio4 */
5033         .mwdma_mask = 0x07,
5034         .udma_mask      = 0x7f, /* udma0-6 */
5035         .port_ops       = &ipr_sata_ops
5036 };
5037
5038 #ifdef CONFIG_PPC_PSERIES
5039 static const u16 ipr_blocked_processors[] = {
5040         PV_NORTHSTAR,
5041         PV_PULSAR,
5042         PV_POWER4,
5043         PV_ICESTAR,
5044         PV_SSTAR,
5045         PV_POWER4p,
5046         PV_630,
5047         PV_630p
5048 };
5049
5050 /**
5051  * ipr_invalid_adapter - Determine if this adapter is supported on this hardware
5052  * @ioa_cfg:    ioa cfg struct
5053  *
5054  * Adapters that use Gemstone revision < 3.1 do not work reliably on
5055  * certain pSeries hardware. This function determines if the given
5056  * adapter is in one of these confgurations or not.
5057  *
5058  * Return value:
5059  *      1 if adapter is not supported / 0 if adapter is supported
5060  **/
5061 static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
5062 {
5063         u8 rev_id;
5064         int i;
5065
5066         if (ioa_cfg->type == 0x5702) {
5067                 if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
5068                                          &rev_id) == PCIBIOS_SUCCESSFUL) {
5069                         if (rev_id < 4) {
5070                                 for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
5071                                         if (__is_processor(ipr_blocked_processors[i]))
5072                                                 return 1;
5073                                 }
5074                         }
5075                 }
5076         }
5077         return 0;
5078 }
5079 #else
5080 #define ipr_invalid_adapter(ioa_cfg) 0
5081 #endif
5082
5083 /**
5084  * ipr_ioa_bringdown_done - IOA bring down completion.
5085  * @ipr_cmd:    ipr command struct
5086  *
5087  * This function processes the completion of an adapter bring down.
5088  * It wakes any reset sleepers.
5089  *
5090  * Return value:
5091  *      IPR_RC_JOB_RETURN
5092  **/
5093 static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd)
5094 {
5095         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5096
5097         ENTER;
5098         ioa_cfg->in_reset_reload = 0;
5099         ioa_cfg->reset_retries = 0;
5100         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5101         wake_up_all(&ioa_cfg->reset_wait_q);
5102
5103         spin_unlock_irq(ioa_cfg->host->host_lock);
5104         scsi_unblock_requests(ioa_cfg->host);
5105         spin_lock_irq(ioa_cfg->host->host_lock);
5106         LEAVE;
5107
5108         return IPR_RC_JOB_RETURN;
5109 }
5110
5111 /**
5112  * ipr_ioa_reset_done - IOA reset completion.
5113  * @ipr_cmd:    ipr command struct
5114  *
5115  * This function processes the completion of an adapter reset.
5116  * It schedules any necessary mid-layer add/removes and
5117  * wakes any reset sleepers.
5118  *
5119  * Return value:
5120  *      IPR_RC_JOB_RETURN
5121  **/
5122 static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
5123 {
5124         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5125         struct ipr_resource_entry *res;
5126         struct ipr_hostrcb *hostrcb, *temp;
5127         int i = 0;
5128
5129         ENTER;
5130         ioa_cfg->in_reset_reload = 0;
5131         ioa_cfg->allow_cmds = 1;
5132         ioa_cfg->reset_cmd = NULL;
5133         ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
5134
5135         list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
5136                 if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
5137                         ipr_trace;
5138                         break;
5139                 }
5140         }
5141         schedule_work(&ioa_cfg->work_q);
5142
5143         list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) {
5144                 list_del(&hostrcb->queue);
5145                 if (i++ < IPR_NUM_LOG_HCAMS)
5146                         ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
5147                 else
5148                         ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
5149         }
5150
5151         dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n");
5152
5153         ioa_cfg->reset_retries = 0;
5154         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5155         wake_up_all(&ioa_cfg->reset_wait_q);
5156
5157         spin_unlock_irq(ioa_cfg->host->host_lock);
5158         scsi_unblock_requests(ioa_cfg->host);
5159         spin_lock_irq(ioa_cfg->host->host_lock);
5160
5161         if (!ioa_cfg->allow_cmds)
5162                 scsi_block_requests(ioa_cfg->host);
5163
5164         LEAVE;
5165         return IPR_RC_JOB_RETURN;
5166 }
5167
5168 /**
5169  * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer
5170  * @supported_dev:      supported device struct
5171  * @vpids:                      vendor product id struct
5172  *
5173  * Return value:
5174  *      none
5175  **/
5176 static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev,
5177                                  struct ipr_std_inq_vpids *vpids)
5178 {
5179         memset(supported_dev, 0, sizeof(struct ipr_supported_device));
5180         memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids));
5181         supported_dev->num_records = 1;
5182         supported_dev->data_length =
5183                 cpu_to_be16(sizeof(struct ipr_supported_device));
5184         supported_dev->reserved = 0;
5185 }
5186
5187 /**
5188  * ipr_set_supported_devs - Send Set Supported Devices for a device
5189  * @ipr_cmd:    ipr command struct
5190  *
5191  * This function send a Set Supported Devices to the adapter
5192  *
5193  * Return value:
5194  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5195  **/
5196 static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
5197 {
5198         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5199         struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev;
5200         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5201         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5202         struct ipr_resource_entry *res = ipr_cmd->u.res;
5203
5204         ipr_cmd->job_step = ipr_ioa_reset_done;
5205
5206         list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) {
5207                 if (!ipr_is_scsi_disk(res))
5208                         continue;
5209
5210                 ipr_cmd->u.res = res;
5211                 ipr_set_sup_dev_dflt(supp_dev, &res->cfgte.std_inq_data.vpids);
5212
5213                 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5214                 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
5215                 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5216
5217                 ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES;
5218                 ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff;
5219                 ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff;
5220
5221                 ioadl->flags_and_data_len = cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST |
5222                                                         sizeof(struct ipr_supported_device));
5223                 ioadl->address = cpu_to_be32(ioa_cfg->vpd_cbs_dma +
5224                                              offsetof(struct ipr_misc_cbs, supp_dev));
5225                 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5226                 ioarcb->write_data_transfer_length =
5227                         cpu_to_be32(sizeof(struct ipr_supported_device));
5228
5229                 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
5230                            IPR_SET_SUP_DEVICE_TIMEOUT);
5231
5232                 ipr_cmd->job_step = ipr_set_supported_devs;
5233                 return IPR_RC_JOB_RETURN;
5234         }
5235
5236         return IPR_RC_JOB_CONTINUE;
5237 }
5238
5239 /**
5240  * ipr_setup_write_cache - Disable write cache if needed
5241  * @ipr_cmd:    ipr command struct
5242  *
5243  * This function sets up adapters write cache to desired setting
5244  *
5245  * Return value:
5246  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5247  **/
5248 static int ipr_setup_write_cache(struct ipr_cmnd *ipr_cmd)
5249 {
5250         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5251
5252         ipr_cmd->job_step = ipr_set_supported_devs;
5253         ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
5254                                     struct ipr_resource_entry, queue);
5255
5256         if (ioa_cfg->cache_state != CACHE_DISABLED)
5257                 return IPR_RC_JOB_CONTINUE;
5258
5259         ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5260         ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5261         ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
5262         ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL;
5263
5264         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5265
5266         return IPR_RC_JOB_RETURN;
5267 }
5268
5269 /**
5270  * ipr_get_mode_page - Locate specified mode page
5271  * @mode_pages: mode page buffer
5272  * @page_code:  page code to find
5273  * @len:                minimum required length for mode page
5274  *
5275  * Return value:
5276  *      pointer to mode page / NULL on failure
5277  **/
5278 static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages,
5279                                u32 page_code, u32 len)
5280 {
5281         struct ipr_mode_page_hdr *mode_hdr;
5282         u32 page_length;
5283         u32 length;
5284
5285         if (!mode_pages || (mode_pages->hdr.length == 0))
5286                 return NULL;
5287
5288         length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len;
5289         mode_hdr = (struct ipr_mode_page_hdr *)
5290                 (mode_pages->data + mode_pages->hdr.block_desc_len);
5291
5292         while (length) {
5293                 if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) {
5294                         if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr)))
5295                                 return mode_hdr;
5296                         break;
5297                 } else {
5298                         page_length = (sizeof(struct ipr_mode_page_hdr) +
5299                                        mode_hdr->page_length);
5300                         length -= page_length;
5301                         mode_hdr = (struct ipr_mode_page_hdr *)
5302                                 ((unsigned long)mode_hdr + page_length);
5303                 }
5304         }
5305         return NULL;
5306 }
5307
5308 /**
5309  * ipr_check_term_power - Check for term power errors
5310  * @ioa_cfg:    ioa config struct
5311  * @mode_pages: IOAFP mode pages buffer
5312  *
5313  * Check the IOAFP's mode page 28 for term power errors
5314  *
5315  * Return value:
5316  *      nothing
5317  **/
5318 static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg,
5319                                  struct ipr_mode_pages *mode_pages)
5320 {
5321         int i;
5322         int entry_length;
5323         struct ipr_dev_bus_entry *bus;
5324         struct ipr_mode_page28 *mode_page;
5325
5326         mode_page = ipr_get_mode_page(mode_pages, 0x28,
5327                                       sizeof(struct ipr_mode_page28));
5328
5329         entry_length = mode_page->entry_length;
5330
5331         bus = mode_page->bus;
5332
5333         for (i = 0; i < mode_page->num_entries; i++) {
5334                 if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) {
5335                         dev_err(&ioa_cfg->pdev->dev,
5336                                 "Term power is absent on scsi bus %d\n",
5337                                 bus->res_addr.bus);
5338                 }
5339
5340                 bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length);
5341         }
5342 }
5343
5344 /**
5345  * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table
5346  * @ioa_cfg:    ioa config struct
5347  *
5348  * Looks through the config table checking for SES devices. If
5349  * the SES device is in the SES table indicating a maximum SCSI
5350  * bus speed, the speed is limited for the bus.
5351  *
5352  * Return value:
5353  *      none
5354  **/
5355 static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg)
5356 {
5357         u32 max_xfer_rate;
5358         int i;
5359
5360         for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
5361                 max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i,
5362                                                        ioa_cfg->bus_attr[i].bus_width);
5363
5364                 if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate)
5365                         ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate;
5366         }
5367 }
5368
5369 /**
5370  * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28
5371  * @ioa_cfg:    ioa config struct
5372  * @mode_pages: mode page 28 buffer
5373  *
5374  * Updates mode page 28 based on driver configuration
5375  *
5376  * Return value:
5377  *      none
5378  **/
5379 static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg,
5380                                                 struct ipr_mode_pages *mode_pages)
5381 {
5382         int i, entry_length;
5383         struct ipr_dev_bus_entry *bus;
5384         struct ipr_bus_attributes *bus_attr;
5385         struct ipr_mode_page28 *mode_page;
5386
5387         mode_page = ipr_get_mode_page(mode_pages, 0x28,
5388                                       sizeof(struct ipr_mode_page28));
5389
5390         entry_length = mode_page->entry_length;
5391
5392         /* Loop for each device bus entry */
5393         for (i = 0, bus = mode_page->bus;
5394              i < mode_page->num_entries;
5395              i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) {
5396                 if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) {
5397                         dev_err(&ioa_cfg->pdev->dev,
5398                                 "Invalid resource address reported: 0x%08X\n",
5399                                 IPR_GET_PHYS_LOC(bus->res_addr));
5400                         continue;
5401                 }
5402
5403                 bus_attr = &ioa_cfg->bus_attr[i];
5404                 bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY;
5405                 bus->bus_width = bus_attr->bus_width;
5406                 bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate);
5407                 bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK;
5408                 if (bus_attr->qas_enabled)
5409                         bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS;
5410                 else
5411                         bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS;
5412         }
5413 }
5414
5415 /**
5416  * ipr_build_mode_select - Build a mode select command
5417  * @ipr_cmd:    ipr command struct
5418  * @res_handle: resource handle to send command to
5419  * @parm:               Byte 2 of Mode Sense command
5420  * @dma_addr:   DMA buffer address
5421  * @xfer_len:   data transfer length
5422  *
5423  * Return value:
5424  *      none
5425  **/
5426 static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
5427                                   __be32 res_handle, u8 parm, u32 dma_addr,
5428                                   u8 xfer_len)
5429 {
5430         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5431         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5432
5433         ioarcb->res_handle = res_handle;
5434         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5435         ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
5436         ioarcb->cmd_pkt.cdb[0] = MODE_SELECT;
5437         ioarcb->cmd_pkt.cdb[1] = parm;
5438         ioarcb->cmd_pkt.cdb[4] = xfer_len;
5439
5440         ioadl->flags_and_data_len =
5441                 cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | xfer_len);
5442         ioadl->address = cpu_to_be32(dma_addr);
5443         ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5444         ioarcb->write_data_transfer_length = cpu_to_be32(xfer_len);
5445 }
5446
5447 /**
5448  * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA
5449  * @ipr_cmd:    ipr command struct
5450  *
5451  * This function sets up the SCSI bus attributes and sends
5452  * a Mode Select for Page 28 to activate them.
5453  *
5454  * Return value:
5455  *      IPR_RC_JOB_RETURN
5456  **/
5457 static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
5458 {
5459         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5460         struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages;
5461         int length;
5462
5463         ENTER;
5464         ipr_scsi_bus_speed_limit(ioa_cfg);
5465         ipr_check_term_power(ioa_cfg, mode_pages);
5466         ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
5467         length = mode_pages->hdr.length + 1;
5468         mode_pages->hdr.length = 0;
5469
5470         ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
5471                               ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
5472                               length);
5473
5474         ipr_cmd->job_step = ipr_setup_write_cache;
5475         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5476
5477         LEAVE;
5478         return IPR_RC_JOB_RETURN;
5479 }
5480
5481 /**
5482  * ipr_build_mode_sense - Builds a mode sense command
5483  * @ipr_cmd:    ipr command struct
5484  * @res:                resource entry struct
5485  * @parm:               Byte 2 of mode sense command
5486  * @dma_addr:   DMA address of mode sense buffer
5487  * @xfer_len:   Size of DMA buffer
5488  *
5489  * Return value:
5490  *      none
5491  **/
5492 static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
5493                                  __be32 res_handle,
5494                                  u8 parm, u32 dma_addr, u8 xfer_len)
5495 {
5496         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5497         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5498
5499         ioarcb->res_handle = res_handle;
5500         ioarcb->cmd_pkt.cdb[0] = MODE_SENSE;
5501         ioarcb->cmd_pkt.cdb[2] = parm;
5502         ioarcb->cmd_pkt.cdb[4] = xfer_len;
5503         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5504
5505         ioadl->flags_and_data_len =
5506                 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
5507         ioadl->address = cpu_to_be32(dma_addr);
5508         ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5509         ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
5510 }
5511
5512 /**
5513  * ipr_reset_cmd_failed - Handle failure of IOA reset command
5514  * @ipr_cmd:    ipr command struct
5515  *
5516  * This function handles the failure of an IOA bringup command.
5517  *
5518  * Return value:
5519  *      IPR_RC_JOB_RETURN
5520  **/
5521 static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd)
5522 {
5523         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5524         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5525
5526         dev_err(&ioa_cfg->pdev->dev,
5527                 "0x%02X failed with IOASC: 0x%08X\n",
5528                 ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc);
5529
5530         ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
5531         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5532         return IPR_RC_JOB_RETURN;
5533 }
5534
5535 /**
5536  * ipr_reset_mode_sense_failed - Handle failure of IOAFP mode sense
5537  * @ipr_cmd:    ipr command struct
5538  *
5539  * This function handles the failure of a Mode Sense to the IOAFP.
5540  * Some adapters do not handle all mode pages.
5541  *
5542  * Return value:
5543  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5544  **/
5545 static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd)
5546 {
5547         u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5548
5549         if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
5550                 ipr_cmd->job_step = ipr_setup_write_cache;
5551                 return IPR_RC_JOB_CONTINUE;
5552         }
5553
5554         return ipr_reset_cmd_failed(ipr_cmd);
5555 }
5556
5557 /**
5558  * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA
5559  * @ipr_cmd:    ipr command struct
5560  *
5561  * This function send a Page 28 mode sense to the IOA to
5562  * retrieve SCSI bus attributes.
5563  *
5564  * Return value:
5565  *      IPR_RC_JOB_RETURN
5566  **/
5567 static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd)
5568 {
5569         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5570
5571         ENTER;
5572         ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE),
5573                              0x28, ioa_cfg->vpd_cbs_dma +
5574                              offsetof(struct ipr_misc_cbs, mode_pages),
5575                              sizeof(struct ipr_mode_pages));
5576
5577         ipr_cmd->job_step = ipr_ioafp_mode_select_page28;
5578         ipr_cmd->job_step_failed = ipr_reset_mode_sense_failed;
5579
5580         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5581
5582         LEAVE;
5583         return IPR_RC_JOB_RETURN;
5584 }
5585
5586 /**
5587  * ipr_init_res_table - Initialize the resource table
5588  * @ipr_cmd:    ipr command struct
5589  *
5590  * This function looks through the existing resource table, comparing
5591  * it with the config table. This function will take care of old/new
5592  * devices and schedule adding/removing them from the mid-layer
5593  * as appropriate.
5594  *
5595  * Return value:
5596  *      IPR_RC_JOB_CONTINUE
5597  **/
5598 static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
5599 {
5600         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5601         struct ipr_resource_entry *res, *temp;
5602         struct ipr_config_table_entry *cfgte;
5603         int found, i;
5604         LIST_HEAD(old_res);
5605
5606         ENTER;
5607         if (ioa_cfg->cfg_table->hdr.flags & IPR_UCODE_DOWNLOAD_REQ)
5608                 dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n");
5609
5610         list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue)
5611                 list_move_tail(&res->queue, &old_res);
5612
5613         for (i = 0; i < ioa_cfg->cfg_table->hdr.num_entries; i++) {
5614                 cfgte = &ioa_cfg->cfg_table->dev[i];
5615                 found = 0;
5616
5617                 list_for_each_entry_safe(res, temp, &old_res, queue) {
5618                         if (!memcmp(&res->cfgte.res_addr,
5619                                     &cfgte->res_addr, sizeof(cfgte->res_addr))) {
5620                                 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5621                                 found = 1;
5622                                 break;
5623                         }
5624                 }
5625
5626                 if (!found) {
5627                         if (list_empty(&ioa_cfg->free_res_q)) {
5628                                 dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n");
5629                                 break;
5630                         }
5631
5632                         found = 1;
5633                         res = list_entry(ioa_cfg->free_res_q.next,
5634                                          struct ipr_resource_entry, queue);
5635                         list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5636                         ipr_init_res_entry(res);
5637                         res->add_to_ml = 1;
5638                 }
5639
5640                 if (found)
5641                         memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
5642         }
5643
5644         list_for_each_entry_safe(res, temp, &old_res, queue) {
5645                 if (res->sdev) {
5646                         res->del_from_ml = 1;
5647                         res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
5648                         list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5649                 } else {
5650                         list_move_tail(&res->queue, &ioa_cfg->free_res_q);
5651                 }
5652         }
5653
5654         ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
5655
5656         LEAVE;
5657         return IPR_RC_JOB_CONTINUE;
5658 }
5659
5660 /**
5661  * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter.
5662  * @ipr_cmd:    ipr command struct
5663  *
5664  * This function sends a Query IOA Configuration command
5665  * to the adapter to retrieve the IOA configuration table.
5666  *
5667  * Return value:
5668  *      IPR_RC_JOB_RETURN
5669  **/
5670 static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
5671 {
5672         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5673         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5674         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5675         struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
5676
5677         ENTER;
5678         dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n",
5679                  ucode_vpd->major_release, ucode_vpd->card_type,
5680                  ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]);
5681         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5682         ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5683
5684         ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
5685         ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_config_table) >> 8) & 0xff;
5686         ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_config_table) & 0xff;
5687
5688         ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5689         ioarcb->read_data_transfer_length =
5690                 cpu_to_be32(sizeof(struct ipr_config_table));
5691
5692         ioadl->address = cpu_to_be32(ioa_cfg->cfg_table_dma);
5693         ioadl->flags_and_data_len =
5694                 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(struct ipr_config_table));
5695
5696         ipr_cmd->job_step = ipr_init_res_table;
5697
5698         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5699
5700         LEAVE;
5701         return IPR_RC_JOB_RETURN;
5702 }
5703
5704 /**
5705  * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
5706  * @ipr_cmd:    ipr command struct
5707  *
5708  * This utility function sends an inquiry to the adapter.
5709  *
5710  * Return value:
5711  *      none
5712  **/
5713 static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
5714                               u32 dma_addr, u8 xfer_len)
5715 {
5716         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5717         struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5718
5719         ENTER;
5720         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5721         ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5722
5723         ioarcb->cmd_pkt.cdb[0] = INQUIRY;
5724         ioarcb->cmd_pkt.cdb[1] = flags;
5725         ioarcb->cmd_pkt.cdb[2] = page;
5726         ioarcb->cmd_pkt.cdb[4] = xfer_len;
5727
5728         ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5729         ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
5730
5731         ioadl->address = cpu_to_be32(dma_addr);
5732         ioadl->flags_and_data_len =
5733                 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
5734
5735         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5736         LEAVE;
5737 }
5738
5739 /**
5740  * ipr_inquiry_page_supported - Is the given inquiry page supported
5741  * @page0:              inquiry page 0 buffer
5742  * @page:               page code.
5743  *
5744  * This function determines if the specified inquiry page is supported.
5745  *
5746  * Return value:
5747  *      1 if page is supported / 0 if not
5748  **/
5749 static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page)
5750 {
5751         int i;
5752
5753         for (i = 0; i < min_t(u8, page0->len, IPR_INQUIRY_PAGE0_ENTRIES); i++)
5754                 if (page0->page[i] == page)
5755                         return 1;
5756
5757         return 0;
5758 }
5759
5760 /**
5761  * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter.
5762  * @ipr_cmd:    ipr command struct
5763  *
5764  * This function sends a Page 3 inquiry to the adapter
5765  * to retrieve software VPD information.
5766  *
5767  * Return value:
5768  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5769  **/
5770 static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd)
5771 {
5772         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5773         struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
5774
5775         ENTER;
5776
5777         if (!ipr_inquiry_page_supported(page0, 1))
5778                 ioa_cfg->cache_state = CACHE_NONE;
5779
5780         ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
5781
5782         ipr_ioafp_inquiry(ipr_cmd, 1, 3,
5783                           ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data),
5784                           sizeof(struct ipr_inquiry_page3));
5785
5786         LEAVE;
5787         return IPR_RC_JOB_RETURN;
5788 }
5789
5790 /**
5791  * ipr_ioafp_page0_inquiry - Send a Page 0 Inquiry to the adapter.
5792  * @ipr_cmd:    ipr command struct
5793  *
5794  * This function sends a Page 0 inquiry to the adapter
5795  * to retrieve supported inquiry pages.
5796  *
5797  * Return value:
5798  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5799  **/
5800 static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd)
5801 {
5802         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5803         char type[5];
5804
5805         ENTER;
5806
5807         /* Grab the type out of the VPD and store it away */
5808         memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4);
5809         type[4] = '\0';
5810         ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
5811
5812         ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
5813
5814         ipr_ioafp_inquiry(ipr_cmd, 1, 0,
5815                           ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page0_data),
5816                           sizeof(struct ipr_inquiry_page0));
5817
5818         LEAVE;
5819         return IPR_RC_JOB_RETURN;
5820 }
5821
5822 /**
5823  * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter.
5824  * @ipr_cmd:    ipr command struct
5825  *
5826  * This function sends a standard inquiry to the adapter.
5827  *
5828  * Return value:
5829  *      IPR_RC_JOB_RETURN
5830  **/
5831 static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
5832 {
5833         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5834
5835         ENTER;
5836         ipr_cmd->job_step = ipr_ioafp_page0_inquiry;
5837
5838         ipr_ioafp_inquiry(ipr_cmd, 0, 0,
5839                           ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd),
5840                           sizeof(struct ipr_ioa_vpd));
5841
5842         LEAVE;
5843         return IPR_RC_JOB_RETURN;
5844 }
5845
5846 /**
5847  * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ.
5848  * @ipr_cmd:    ipr command struct
5849  *
5850  * This function send an Identify Host Request Response Queue
5851  * command to establish the HRRQ with the adapter.
5852  *
5853  * Return value:
5854  *      IPR_RC_JOB_RETURN
5855  **/
5856 static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd)
5857 {
5858         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5859         struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5860
5861         ENTER;
5862         dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n");
5863
5864         ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q;
5865         ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5866
5867         ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5868         ioarcb->cmd_pkt.cdb[2] =
5869                 ((u32) ioa_cfg->host_rrq_dma >> 24) & 0xff;
5870         ioarcb->cmd_pkt.cdb[3] =
5871                 ((u32) ioa_cfg->host_rrq_dma >> 16) & 0xff;
5872         ioarcb->cmd_pkt.cdb[4] =
5873                 ((u32) ioa_cfg->host_rrq_dma >> 8) & 0xff;
5874         ioarcb->cmd_pkt.cdb[5] =
5875                 ((u32) ioa_cfg->host_rrq_dma) & 0xff;
5876         ioarcb->cmd_pkt.cdb[7] =
5877                 ((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff;
5878         ioarcb->cmd_pkt.cdb[8] =
5879                 (sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff;
5880
5881         ipr_cmd->job_step = ipr_ioafp_std_inquiry;
5882
5883         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5884
5885         LEAVE;
5886         return IPR_RC_JOB_RETURN;
5887 }
5888
5889 /**
5890  * ipr_reset_timer_done - Adapter reset timer function
5891  * @ipr_cmd:    ipr command struct
5892  *
5893  * Description: This function is used in adapter reset processing
5894  * for timing events. If the reset_cmd pointer in the IOA
5895  * config struct is not this adapter's we are doing nested
5896  * resets and fail_all_ops will take care of freeing the
5897  * command block.
5898  *
5899  * Return value:
5900  *      none
5901  **/
5902 static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd)
5903 {
5904         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5905         unsigned long lock_flags = 0;
5906
5907         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
5908
5909         if (ioa_cfg->reset_cmd == ipr_cmd) {
5910                 list_del(&ipr_cmd->queue);
5911                 ipr_cmd->done(ipr_cmd);
5912         }
5913
5914         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
5915 }
5916
5917 /**
5918  * ipr_reset_start_timer - Start a timer for adapter reset job
5919  * @ipr_cmd:    ipr command struct
5920  * @timeout:    timeout value
5921  *
5922  * Description: This function is used in adapter reset processing
5923  * for timing events. If the reset_cmd pointer in the IOA
5924  * config struct is not this adapter's we are doing nested
5925  * resets and fail_all_ops will take care of freeing the
5926  * command block.
5927  *
5928  * Return value:
5929  *      none
5930  **/
5931 static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd,
5932                                   unsigned long timeout)
5933 {
5934         list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
5935         ipr_cmd->done = ipr_reset_ioa_job;
5936
5937         ipr_cmd->timer.data = (unsigned long) ipr_cmd;
5938         ipr_cmd->timer.expires = jiffies + timeout;
5939         ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done;
5940         add_timer(&ipr_cmd->timer);
5941 }
5942
5943 /**
5944  * ipr_init_ioa_mem - Initialize ioa_cfg control block
5945  * @ioa_cfg:    ioa cfg struct
5946  *
5947  * Return value:
5948  *      nothing
5949  **/
5950 static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg)
5951 {
5952         memset(ioa_cfg->host_rrq, 0, sizeof(u32) * IPR_NUM_CMD_BLKS);
5953
5954         /* Initialize Host RRQ pointers */
5955         ioa_cfg->hrrq_start = ioa_cfg->host_rrq;
5956         ioa_cfg->hrrq_end = &ioa_cfg->host_rrq[IPR_NUM_CMD_BLKS - 1];
5957         ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
5958         ioa_cfg->toggle_bit = 1;
5959
5960         /* Zero out config table */
5961         memset(ioa_cfg->cfg_table, 0, sizeof(struct ipr_config_table));
5962 }
5963
5964 /**
5965  * ipr_reset_enable_ioa - Enable the IOA following a reset.
5966  * @ipr_cmd:    ipr command struct
5967  *
5968  * This function reinitializes some control blocks and
5969  * enables destructive diagnostics on the adapter.
5970  *
5971  * Return value:
5972  *      IPR_RC_JOB_RETURN
5973  **/
5974 static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
5975 {
5976         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5977         volatile u32 int_reg;
5978
5979         ENTER;
5980         ipr_cmd->job_step = ipr_ioafp_indentify_hrrq;
5981         ipr_init_ioa_mem(ioa_cfg);
5982
5983         ioa_cfg->allow_interrupts = 1;
5984         int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
5985
5986         if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
5987                 writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
5988                        ioa_cfg->regs.clr_interrupt_mask_reg);
5989                 int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
5990                 return IPR_RC_JOB_CONTINUE;
5991         }
5992
5993         /* Enable destructive diagnostics on IOA */
5994         writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg);
5995
5996         writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg);
5997         int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
5998
5999         dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
6000
6001         ipr_cmd->timer.data = (unsigned long) ipr_cmd;
6002         ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ);
6003         ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
6004         ipr_cmd->done = ipr_reset_ioa_job;
6005         add_timer(&ipr_cmd->timer);
6006         list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
6007
6008         LEAVE;
6009         return IPR_RC_JOB_RETURN;
6010 }
6011
6012 /**
6013  * ipr_reset_wait_for_dump - Wait for a dump to timeout.
6014  * @ipr_cmd:    ipr command struct
6015  *
6016  * This function is invoked when an adapter dump has run out
6017  * of processing time.
6018  *
6019  * Return value:
6020  *      IPR_RC_JOB_CONTINUE
6021  **/
6022 static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd)
6023 {
6024         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6025
6026         if (ioa_cfg->sdt_state == GET_DUMP)
6027                 ioa_cfg->sdt_state = ABORT_DUMP;
6028
6029         ipr_cmd->job_step = ipr_reset_alert;
6030
6031         return IPR_RC_JOB_CONTINUE;
6032 }
6033
6034 /**
6035  * ipr_unit_check_no_data - Log a unit check/no data error log
6036  * @ioa_cfg:            ioa config struct
6037  *
6038  * Logs an error indicating the adapter unit checked, but for some
6039  * reason, we were unable to fetch the unit check buffer.
6040  *
6041  * Return value:
6042  *      nothing
6043  **/
6044 static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg)
6045 {
6046         ioa_cfg->errors_logged++;
6047         dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n");
6048 }
6049
6050 /**
6051  * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA
6052  * @ioa_cfg:            ioa config struct
6053  *
6054  * Fetches the unit check buffer from the adapter by clocking the data
6055  * through the mailbox register.
6056  *
6057  * Return value:
6058  *      nothing
6059  **/
6060 static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
6061 {
6062         unsigned long mailbox;
6063         struct ipr_hostrcb *hostrcb;
6064         struct ipr_uc_sdt sdt;
6065         int rc, length;
6066
6067         mailbox = readl(ioa_cfg->ioa_mailbox);
6068
6069         if (!ipr_sdt_is_fmt2(mailbox)) {
6070                 ipr_unit_check_no_data(ioa_cfg);
6071                 return;
6072         }
6073
6074         memset(&sdt, 0, sizeof(struct ipr_uc_sdt));
6075         rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt,
6076                                         (sizeof(struct ipr_uc_sdt)) / sizeof(__be32));
6077
6078         if (rc || (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE) ||
6079             !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY)) {
6080                 ipr_unit_check_no_data(ioa_cfg);
6081                 return;
6082         }
6083
6084         /* Find length of the first sdt entry (UC buffer) */
6085         length = (be32_to_cpu(sdt.entry[0].end_offset) -
6086                   be32_to_cpu(sdt.entry[0].bar_str_offset)) & IPR_FMT2_MBX_ADDR_MASK;
6087
6088         hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next,
6089                              struct ipr_hostrcb, queue);
6090         list_del(&hostrcb->queue);
6091         memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam));
6092
6093         rc = ipr_get_ldump_data_section(ioa_cfg,
6094                                         be32_to_cpu(sdt.entry[0].bar_str_offset),
6095                                         (__be32 *)&hostrcb->hcam,
6096                                         min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
6097
6098         if (!rc)
6099                 ipr_handle_log_data(ioa_cfg, hostrcb);
6100         else
6101                 ipr_unit_check_no_data(ioa_cfg);
6102
6103         list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
6104 }
6105
6106 /**
6107  * ipr_reset_restore_cfg_space - Restore PCI config space.
6108  * @ipr_cmd:    ipr command struct
6109  *
6110  * Description: This function restores the saved PCI config space of
6111  * the adapter, fails all outstanding ops back to the callers, and
6112  * fetches the dump/unit check if applicable to this reset.
6113  *
6114  * Return value:
6115  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6116  **/
6117 static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
6118 {
6119         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6120         int rc;
6121
6122         ENTER;
6123         pci_unblock_user_cfg_access(ioa_cfg->pdev);
6124         rc = pci_restore_state(ioa_cfg->pdev);
6125
6126         if (rc != PCIBIOS_SUCCESSFUL) {
6127                 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6128                 return IPR_RC_JOB_CONTINUE;
6129         }
6130
6131         if (ipr_set_pcix_cmd_reg(ioa_cfg)) {
6132                 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6133                 return IPR_RC_JOB_CONTINUE;
6134         }
6135
6136         ipr_fail_all_ops(ioa_cfg);
6137
6138         if (ioa_cfg->ioa_unit_checked) {
6139                 ioa_cfg->ioa_unit_checked = 0;
6140                 ipr_get_unit_check_buffer(ioa_cfg);
6141                 ipr_cmd->job_step = ipr_reset_alert;
6142                 ipr_reset_start_timer(ipr_cmd, 0);
6143                 return IPR_RC_JOB_RETURN;
6144         }
6145
6146         if (ioa_cfg->in_ioa_bringdown) {
6147                 ipr_cmd->job_step = ipr_ioa_bringdown_done;
6148         } else {
6149                 ipr_cmd->job_step = ipr_reset_enable_ioa;
6150
6151                 if (GET_DUMP == ioa_cfg->sdt_state) {
6152                         ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
6153                         ipr_cmd->job_step = ipr_reset_wait_for_dump;
6154                         schedule_work(&ioa_cfg->work_q);
6155                         return IPR_RC_JOB_RETURN;
6156                 }
6157         }
6158
6159         ENTER;
6160         return IPR_RC_JOB_CONTINUE;
6161 }
6162
6163 /**
6164  * ipr_reset_start_bist - Run BIST on the adapter.
6165  * @ipr_cmd:    ipr command struct
6166  *
6167  * Description: This function runs BIST on the adapter, then delays 2 seconds.
6168  *
6169  * Return value:
6170  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6171  **/
6172 static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
6173 {
6174         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6175         int rc;
6176
6177         ENTER;
6178         pci_block_user_cfg_access(ioa_cfg->pdev);
6179         rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
6180
6181         if (rc != PCIBIOS_SUCCESSFUL) {
6182                 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6183                 rc = IPR_RC_JOB_CONTINUE;
6184         } else {
6185                 ipr_cmd->job_step = ipr_reset_restore_cfg_space;
6186                 ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
6187                 rc = IPR_RC_JOB_RETURN;
6188         }
6189
6190         LEAVE;
6191         return rc;
6192 }
6193
6194 /**
6195  * ipr_reset_allowed - Query whether or not IOA can be reset
6196  * @ioa_cfg:    ioa config struct
6197  *
6198  * Return value:
6199  *      0 if reset not allowed / non-zero if reset is allowed
6200  **/
6201 static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg)
6202 {
6203         volatile u32 temp_reg;
6204
6205         temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
6206         return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0);
6207 }
6208
6209 /**
6210  * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA.
6211  * @ipr_cmd:    ipr command struct
6212  *
6213  * Description: This function waits for adapter permission to run BIST,
6214  * then runs BIST. If the adapter does not give permission after a
6215  * reasonable time, we will reset the adapter anyway. The impact of
6216  * resetting the adapter without warning the adapter is the risk of
6217  * losing the persistent error log on the adapter. If the adapter is
6218  * reset while it is writing to the flash on the adapter, the flash
6219  * segment will have bad ECC and be zeroed.
6220  *
6221  * Return value:
6222  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6223  **/
6224 static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
6225 {
6226         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6227         int rc = IPR_RC_JOB_RETURN;
6228
6229         if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) {
6230                 ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
6231                 ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
6232         } else {
6233                 ipr_cmd->job_step = ipr_reset_start_bist;
6234                 rc = IPR_RC_JOB_CONTINUE;
6235         }
6236
6237         return rc;
6238 }
6239
6240 /**
6241  * ipr_reset_alert_part2 - Alert the adapter of a pending reset
6242  * @ipr_cmd:    ipr command struct
6243  *
6244  * Description: This function alerts the adapter that it will be reset.
6245  * If memory space is not currently enabled, proceed directly
6246  * to running BIST on the adapter. The timer must always be started
6247  * so we guarantee we do not run BIST from ipr_isr.
6248  *
6249  * Return value:
6250  *      IPR_RC_JOB_RETURN
6251  **/
6252 static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
6253 {
6254         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6255         u16 cmd_reg;
6256         int rc;
6257
6258         ENTER;
6259         rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg);
6260
6261         if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) {
6262                 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
6263                 writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg);
6264                 ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
6265         } else {
6266                 ipr_cmd->job_step = ipr_reset_start_bist;
6267         }
6268
6269         ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
6270         ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
6271
6272         LEAVE;
6273         return IPR_RC_JOB_RETURN;
6274 }
6275
6276 /**
6277  * ipr_reset_ucode_download_done - Microcode download completion
6278  * @ipr_cmd:    ipr command struct
6279  *
6280  * Description: This function unmaps the microcode download buffer.
6281  *
6282  * Return value:
6283  *      IPR_RC_JOB_CONTINUE
6284  **/
6285 static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd)
6286 {
6287         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6288         struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
6289
6290         pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist,
6291                      sglist->num_sg, DMA_TO_DEVICE);
6292
6293         ipr_cmd->job_step = ipr_reset_alert;
6294         return IPR_RC_JOB_CONTINUE;
6295 }
6296
6297 /**
6298  * ipr_reset_ucode_download - Download microcode to the adapter
6299  * @ipr_cmd:    ipr command struct
6300  *
6301  * Description: This function checks to see if it there is microcode
6302  * to download to the adapter. If there is, a download is performed.
6303  *
6304  * Return value:
6305  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6306  **/
6307 static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd)
6308 {
6309         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6310         struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
6311
6312         ENTER;
6313         ipr_cmd->job_step = ipr_reset_alert;
6314
6315         if (!sglist)
6316                 return IPR_RC_JOB_CONTINUE;
6317
6318         ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
6319         ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
6320         ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER;
6321         ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE;
6322         ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16;
6323         ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8;
6324         ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff;
6325
6326         ipr_build_ucode_ioadl(ipr_cmd, sglist);
6327         ipr_cmd->job_step = ipr_reset_ucode_download_done;
6328
6329         ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
6330                    IPR_WRITE_BUFFER_TIMEOUT);
6331
6332         LEAVE;
6333         return IPR_RC_JOB_RETURN;
6334 }
6335
6336 /**
6337  * ipr_reset_shutdown_ioa - Shutdown the adapter
6338  * @ipr_cmd:    ipr command struct
6339  *
6340  * Description: This function issues an adapter shutdown of the
6341  * specified type to the specified adapter as part of the
6342  * adapter reset job.
6343  *
6344  * Return value:
6345  *      IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6346  **/
6347 static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd)
6348 {
6349         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6350         enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type;
6351         unsigned long timeout;
6352         int rc = IPR_RC_JOB_CONTINUE;
6353
6354         ENTER;
6355         if (shutdown_type != IPR_SHUTDOWN_NONE && !ioa_cfg->ioa_is_dead) {
6356                 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
6357                 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
6358                 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
6359                 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type;
6360
6361                 if (shutdown_type == IPR_SHUTDOWN_ABBREV)
6362                         timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT;
6363                 else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL)
6364                         timeout = IPR_INTERNAL_TIMEOUT;
6365                 else
6366                         timeout = IPR_SHUTDOWN_TIMEOUT;
6367
6368                 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout);
6369
6370                 rc = IPR_RC_JOB_RETURN;
6371                 ipr_cmd->job_step = ipr_reset_ucode_download;
6372         } else
6373                 ipr_cmd->job_step = ipr_reset_alert;
6374
6375         LEAVE;
6376         return rc;
6377 }
6378
6379 /**
6380  * ipr_reset_ioa_job - Adapter reset job
6381  * @ipr_cmd:    ipr command struct
6382  *
6383  * Description: This function is the job router for the adapter reset job.
6384  *
6385  * Return value:
6386  *      none
6387  **/
6388 static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd)
6389 {
6390         u32 rc, ioasc;
6391         struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6392
6393         do {
6394                 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
6395
6396                 if (ioa_cfg->reset_cmd != ipr_cmd) {
6397                         /*
6398                          * We are doing nested adapter resets and this is
6399                          * not the current reset job.
6400                          */
6401                         list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
6402                         return;
6403                 }
6404
6405                 if (IPR_IOASC_SENSE_KEY(ioasc)) {
6406                         rc = ipr_cmd->job_step_failed(ipr_cmd);
6407                         if (rc == IPR_RC_JOB_RETURN)
6408                                 return;
6409                 }
6410
6411                 ipr_reinit_ipr_cmnd(ipr_cmd);
6412                 ipr_cmd->job_step_failed = ipr_reset_cmd_failed;
6413                 rc = ipr_cmd->job_step(ipr_cmd);
6414         } while(rc == IPR_RC_JOB_CONTINUE);
6415 }
6416
6417 /**
6418  * _ipr_initiate_ioa_reset - Initiate an adapter reset
6419  * @ioa_cfg:            ioa config struct
6420  * @job_step:           first job step of reset job
6421  * @shutdown_type:      shutdown type
6422  *
6423  * Description: This function will initiate the reset of the given adapter
6424  * starting at the selected job step.
6425  * If the caller needs to wait on the completion of the reset,
6426  * the caller must sleep on the reset_wait_q.
6427  *
6428  * Return value:
6429  *      none
6430  **/
6431 static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
6432                                     int (*job_step) (struct ipr_cmnd *),
6433                                     enum ipr_shutdown_type shutdown_type)
6434 {
6435         struct ipr_cmnd *ipr_cmd;
6436
6437         ioa_cfg->in_reset_reload = 1;
6438         ioa_cfg->allow_cmds = 0;
6439         scsi_block_requests(ioa_cfg->host);
6440
6441         ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
6442         ioa_cfg->reset_cmd = ipr_cmd;
6443         ipr_cmd->job_step = job_step;
6444         ipr_cmd->u.shutdown_type = shutdown_type;
6445
6446         ipr_reset_ioa_job(ipr_cmd);
6447 }
6448
6449 /**
6450  * ipr_initiate_ioa_reset - Initiate an adapter reset
6451  * @ioa_cfg:            ioa config struct
6452  * @shutdown_type:      shutdown type
6453  *
6454  * Description: This function will initiate the reset of the given adapter.
6455  * If the caller needs to wait on the completion of the reset,
6456  * the caller must sleep on the reset_wait_q.
6457  *
6458  * Return value:
6459  *      none
6460  **/
6461 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
6462                                    enum ipr_shutdown_type shutdown_type)
6463 {
6464         if (ioa_cfg->ioa_is_dead)
6465                 return;
6466
6467         if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP)
6468                 ioa_cfg->sdt_state = ABORT_DUMP;
6469
6470         if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) {
6471                 dev_err(&ioa_cfg->pdev->dev,
6472                         "IOA taken offline - error recovery failed\n");
6473
6474                 ioa_cfg->reset_retries = 0;
6475                 ioa_cfg->ioa_is_dead = 1;
6476
6477                 if (ioa_cfg->in_ioa_bringdown) {
6478                         ioa_cfg->reset_cmd = NULL;
6479                         ioa_cfg->in_reset_reload = 0;
6480                         ipr_fail_all_ops(ioa_cfg);
6481                         wake_up_all(&ioa_cfg->reset_wait_q);
6482
6483                         spin_unlock_irq(ioa_cfg->host->host_lock);
6484                         scsi_unblock_requests(ioa_cfg->host);
6485                         spin_lock_irq(ioa_cfg->host->host_lock);
6486                         return;
6487                 } else {
6488                         ioa_cfg->in_ioa_bringdown = 1;
6489                         shutdown_type = IPR_SHUTDOWN_NONE;
6490                 }
6491         }
6492
6493         _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa,
6494                                 shutdown_type);
6495 }
6496
6497 /**
6498  * ipr_reset_freeze - Hold off all I/O activity
6499  * @ipr_cmd:    ipr command struct
6500  *
6501  * Description: If the PCI slot is frozen, hold off all I/O
6502  * activity; then, as soon as the slot is available again,
6503  * initiate an adapter reset.
6504  */
6505 static int ipr_reset_freeze(struct ipr_cmnd *ipr_cmd)
6506 {
6507         /* Disallow new interrupts, avoid loop */
6508         ipr_cmd->ioa_cfg->allow_interrupts = 0;
6509         list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
6510         ipr_cmd->done = ipr_reset_ioa_job;
6511         return IPR_RC_JOB_RETURN;
6512 }
6513
6514 /**
6515  * ipr_pci_frozen - Called when slot has experienced a PCI bus error.
6516  * @pdev:       PCI device struct
6517  *
6518  * Description: This routine is called to tell us that the PCI bus
6519  * is down. Can't do anything here, except put the device driver
6520  * into a holding pattern, waiting for the PCI bus to come back.
6521  */
6522 static void ipr_pci_frozen(struct pci_dev *pdev)
6523 {
6524         unsigned long flags = 0;
6525         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6526
6527         spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6528         _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_freeze, IPR_SHUTDOWN_NONE);
6529         spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6530 }
6531
6532 /**
6533  * ipr_pci_slot_reset - Called when PCI slot has been reset.
6534  * @pdev:       PCI device struct
6535  *
6536  * Description: This routine is called by the pci error recovery
6537  * code after the PCI slot has been reset, just before we
6538  * should resume normal operations.
6539  */
6540 static pci_ers_result_t ipr_pci_slot_reset(struct pci_dev *pdev)
6541 {
6542         unsigned long flags = 0;
6543         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6544
6545         spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6546         _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
6547                                          IPR_SHUTDOWN_NONE);
6548         spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6549         return PCI_ERS_RESULT_RECOVERED;
6550 }
6551
6552 /**
6553  * ipr_pci_perm_failure - Called when PCI slot is dead for good.
6554  * @pdev:       PCI device struct
6555  *
6556  * Description: This routine is called when the PCI bus has
6557  * permanently failed.
6558  */
6559 static void ipr_pci_perm_failure(struct pci_dev *pdev)
6560 {
6561         unsigned long flags = 0;
6562         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6563
6564         spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6565         if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
6566                 ioa_cfg->sdt_state = ABORT_DUMP;
6567         ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
6568         ioa_cfg->in_ioa_bringdown = 1;
6569         ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
6570         spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6571 }
6572
6573 /**
6574  * ipr_pci_error_detected - Called when a PCI error is detected.
6575  * @pdev:       PCI device struct
6576  * @state:      PCI channel state
6577  *
6578  * Description: Called when a PCI error is detected.
6579  *
6580  * Return value:
6581  *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
6582  */
6583 static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
6584                                                pci_channel_state_t state)
6585 {
6586         switch (state) {
6587         case pci_channel_io_frozen:
6588                 ipr_pci_frozen(pdev);
6589                 return PCI_ERS_RESULT_NEED_RESET;
6590         case pci_channel_io_perm_failure:
6591                 ipr_pci_perm_failure(pdev);
6592                 return PCI_ERS_RESULT_DISCONNECT;
6593                 break;
6594         default:
6595                 break;
6596         }
6597         return PCI_ERS_RESULT_NEED_RESET;
6598 }
6599
6600 /**
6601  * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
6602  * @ioa_cfg:    ioa cfg struct
6603  *
6604  * Description: This is the second phase of adapter intialization
6605  * This function takes care of initilizing the adapter to the point
6606  * where it can accept new commands.
6607
6608  * Return value:
6609  *      0 on sucess / -EIO on failure
6610  **/
6611 static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
6612 {
6613         int rc = 0;
6614         unsigned long host_lock_flags = 0;
6615
6616         ENTER;
6617         spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
6618         dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg);
6619         if (ioa_cfg->needs_hard_reset) {
6620                 ioa_cfg->needs_hard_reset = 0;
6621                 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
6622         } else
6623                 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa,
6624                                         IPR_SHUTDOWN_NONE);
6625
6626         spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
6627         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
6628         spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
6629
6630         if (ioa_cfg->ioa_is_dead) {
6631                 rc = -EIO;
6632         } else if (ipr_invalid_adapter(ioa_cfg)) {
6633                 if (!ipr_testmode)
6634                         rc = -EIO;
6635
6636                 dev_err(&ioa_cfg->pdev->dev,
6637                         "Adapter not supported in this hardware configuration.\n");
6638         }
6639
6640         spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
6641
6642         LEAVE;
6643         return rc;
6644 }
6645
6646 /**
6647  * ipr_free_cmd_blks - Frees command blocks allocated for an adapter
6648  * @ioa_cfg:    ioa config struct
6649  *
6650  * Return value:
6651  *      none
6652  **/
6653 static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
6654 {
6655         int i;
6656
6657         for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
6658                 if (ioa_cfg->ipr_cmnd_list[i])
6659                         pci_pool_free(ioa_cfg->ipr_cmd_pool,
6660                                       ioa_cfg->ipr_cmnd_list[i],
6661                                       ioa_cfg->ipr_cmnd_list_dma[i]);
6662
6663                 ioa_cfg->ipr_cmnd_list[i] = NULL;
6664         }
6665
6666         if (ioa_cfg->ipr_cmd_pool)
6667                 pci_pool_destroy (ioa_cfg->ipr_cmd_pool);
6668
6669         ioa_cfg->ipr_cmd_pool = NULL;
6670 }
6671
6672 /**
6673  * ipr_free_mem - Frees memory allocated for an adapter
6674  * @ioa_cfg:    ioa cfg struct
6675  *
6676  * Return value:
6677  *      nothing
6678  **/
6679 static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg)
6680 {
6681         int i;
6682
6683         kfree(ioa_cfg->res_entries);
6684         pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs),
6685                             ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
6686         ipr_free_cmd_blks(ioa_cfg);
6687         pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
6688                             ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
6689         pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_config_table),
6690                             ioa_cfg->cfg_table,
6691                             ioa_cfg->cfg_table_dma);
6692
6693         for (i = 0; i < IPR_NUM_HCAMS; i++) {
6694                 pci_free_consistent(ioa_cfg->pdev,
6695                                     sizeof(struct ipr_hostrcb),
6696                                     ioa_cfg->hostrcb[i],
6697                                     ioa_cfg->hostrcb_dma[i]);
6698         }
6699
6700         ipr_free_dump(ioa_cfg);
6701         kfree(ioa_cfg->trace);
6702 }
6703
6704 /**
6705  * ipr_free_all_resources - Free all allocated resources for an adapter.
6706  * @ipr_cmd:    ipr command struct
6707  *
6708  * This function frees all allocated resources for the
6709  * specified adapter.
6710  *
6711  * Return value:
6712  *      none
6713  **/
6714 static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg)
6715 {
6716         struct pci_dev *pdev = ioa_cfg->pdev;
6717
6718         ENTER;
6719         free_irq(pdev->irq, ioa_cfg);
6720         iounmap(ioa_cfg->hdw_dma_regs);
6721         pci_release_regions(pdev);
6722         ipr_free_mem(ioa_cfg);
6723         scsi_host_put(ioa_cfg->host);
6724         pci_disable_device(pdev);
6725         LEAVE;
6726 }
6727
6728 /**
6729  * ipr_alloc_cmd_blks - Allocate command blocks for an adapter
6730  * @ioa_cfg:    ioa config struct
6731  *
6732  * Return value:
6733  *      0 on success / -ENOMEM on allocation failure
6734  **/
6735 static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
6736 {
6737         struct ipr_cmnd *ipr_cmd;
6738         struct ipr_ioarcb *ioarcb;
6739         dma_addr_t dma_addr;
6740         int i;
6741
6742         ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
6743                                                  sizeof(struct ipr_cmnd), 8, 0);
6744
6745         if (!ioa_cfg->ipr_cmd_pool)
6746                 return -ENOMEM;
6747
6748         for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
6749                 ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, SLAB_KERNEL, &dma_addr);
6750
6751                 if (!ipr_cmd) {
6752                         ipr_free_cmd_blks(ioa_cfg);
6753                         return -ENOMEM;
6754                 }
6755
6756                 memset(ipr_cmd, 0, sizeof(*ipr_cmd));
6757                 ioa_cfg->ipr_cmnd_list[i] = ipr_cmd;
6758                 ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
6759
6760                 ioarcb = &ipr_cmd->ioarcb;
6761                 ioarcb->ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
6762                 ioarcb->host_response_handle = cpu_to_be32(i << 2);
6763                 ioarcb->write_ioadl_addr =
6764                         cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
6765                 ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
6766                 ioarcb->ioasa_host_pci_addr =
6767                         cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
6768                 ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
6769                 ipr_cmd->cmd_index = i;
6770                 ipr_cmd->ioa_cfg = ioa_cfg;
6771                 ipr_cmd->sense_buffer_dma = dma_addr +
6772                         offsetof(struct ipr_cmnd, sense_buffer);
6773
6774                 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
6775         }
6776
6777         return 0;
6778 }
6779
6780 /**
6781  * ipr_alloc_mem - Allocate memory for an adapter
6782  * @ioa_cfg:    ioa config struct
6783  *
6784  * Return value:
6785  *      0 on success / non-zero for error
6786  **/
6787 static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
6788 {
6789         struct pci_dev *pdev = ioa_cfg->pdev;
6790         int i, rc = -ENOMEM;
6791
6792         ENTER;
6793         ioa_cfg->res_entries = kzalloc(sizeof(struct ipr_resource_entry) *
6794                                        IPR_MAX_PHYSICAL_DEVS, GFP_KERNEL);
6795
6796         if (!ioa_cfg->res_entries)
6797                 goto out;
6798
6799         for (i = 0; i < IPR_MAX_PHYSICAL_DEVS; i++)
6800                 list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q);
6801
6802         ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
6803                                                 sizeof(struct ipr_misc_cbs),
6804                                                 &ioa_cfg->vpd_cbs_dma);
6805
6806         if (!ioa_cfg->vpd_cbs)
6807                 goto out_free_res_entries;
6808
6809         if (ipr_alloc_cmd_blks(ioa_cfg))
6810                 goto out_free_vpd_cbs;
6811
6812         ioa_cfg->host_rrq = pci_alloc_consistent(ioa_cfg->pdev,
6813                                                  sizeof(u32) * IPR_NUM_CMD_BLKS,
6814                                                  &ioa_cfg->host_rrq_dma);
6815
6816         if (!ioa_cfg->host_rrq)
6817                 goto out_ipr_free_cmd_blocks;
6818
6819         ioa_cfg->cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
6820                                                   sizeof(struct ipr_config_table),
6821                                                   &ioa_cfg->cfg_table_dma);
6822
6823         if (!ioa_cfg->cfg_table)
6824                 goto out_free_host_rrq;
6825
6826         for (i = 0; i < IPR_NUM_HCAMS; i++) {
6827                 ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev,
6828                                                            sizeof(struct ipr_hostrcb),
6829                                                            &ioa_cfg->hostrcb_dma[i]);
6830
6831                 if (!ioa_cfg->hostrcb[i])
6832                         goto out_free_hostrcb_dma;
6833
6834                 ioa_cfg->hostrcb[i]->hostrcb_dma =
6835                         ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam);
6836                 list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q);
6837         }
6838
6839         ioa_cfg->trace = kzalloc(sizeof(struct ipr_trace_entry) *
6840                                  IPR_NUM_TRACE_ENTRIES, GFP_KERNEL);
6841
6842         if (!ioa_cfg->trace)
6843                 goto out_free_hostrcb_dma;
6844
6845         rc = 0;
6846 out:
6847         LEAVE;
6848         return rc;
6849
6850 out_free_hostrcb_dma:
6851         while (i-- > 0) {
6852                 pci_free_consistent(pdev, sizeof(struct ipr_hostrcb),
6853                                     ioa_cfg->hostrcb[i],
6854                                     ioa_cfg->hostrcb_dma[i]);
6855         }
6856         pci_free_consistent(pdev, sizeof(struct ipr_config_table),
6857                             ioa_cfg->cfg_table, ioa_cfg->cfg_table_dma);
6858 out_free_host_rrq:
6859         pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
6860                             ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
6861 out_ipr_free_cmd_blocks:
6862         ipr_free_cmd_blks(ioa_cfg);
6863 out_free_vpd_cbs:
6864         pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs),
6865                             ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
6866 out_free_res_entries:
6867         kfree(ioa_cfg->res_entries);
6868         goto out;
6869 }
6870
6871 /**
6872  * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values
6873  * @ioa_cfg:    ioa config struct
6874  *
6875  * Return value:
6876  *      none
6877  **/
6878 static void __devinit ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg)
6879 {
6880         int i;
6881
6882         for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
6883                 ioa_cfg->bus_attr[i].bus = i;
6884                 ioa_cfg->bus_attr[i].qas_enabled = 0;
6885                 ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH;
6886                 if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds))
6887                         ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed];
6888                 else
6889                         ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE;
6890         }
6891 }
6892
6893 /**
6894  * ipr_init_ioa_cfg - Initialize IOA config struct
6895  * @ioa_cfg:    ioa config struct
6896  * @host:               scsi host struct
6897  * @pdev:               PCI dev struct
6898  *
6899  * Return value:
6900  *      none
6901  **/
6902 static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
6903                                        struct Scsi_Host *host, struct pci_dev *pdev)
6904 {
6905         const struct ipr_interrupt_offsets *p;
6906         struct ipr_interrupts *t;
6907         void __iomem *base;
6908
6909         ioa_cfg->host = host;
6910         ioa_cfg->pdev = pdev;
6911         ioa_cfg->log_level = ipr_log_level;
6912         ioa_cfg->doorbell = IPR_DOORBELL;
6913         if (!ipr_auto_create)
6914                 ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
6915         sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
6916         sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
6917         sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
6918         sprintf(ioa_cfg->ipr_pending_label, IPR_PENDQ_LABEL);
6919         sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START);
6920         sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL);
6921         sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL);
6922         sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL);
6923
6924         INIT_LIST_HEAD(&ioa_cfg->free_q);
6925         INIT_LIST_HEAD(&ioa_cfg->pending_q);
6926         INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q);
6927         INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q);
6928         INIT_LIST_HEAD(&ioa_cfg->free_res_q);
6929         INIT_LIST_HEAD(&ioa_cfg->used_res_q);
6930         INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
6931         init_waitqueue_head(&ioa_cfg->reset_wait_q);
6932         ioa_cfg->sdt_state = INACTIVE;
6933         if (ipr_enable_cache)
6934                 ioa_cfg->cache_state = CACHE_ENABLED;
6935         else
6936                 ioa_cfg->cache_state = CACHE_DISABLED;
6937
6938         ipr_initialize_bus_attr(ioa_cfg);
6939
6940         host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
6941         host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
6942         host->max_channel = IPR_MAX_BUS_TO_SCAN;
6943         host->unique_id = host->host_no;
6944         host->max_cmd_len = IPR_MAX_CDB_LEN;
6945         pci_set_drvdata(pdev, ioa_cfg);
6946
6947         p = &ioa_cfg->chip_cfg->regs;
6948         t = &ioa_cfg->regs;
6949         base = ioa_cfg->hdw_dma_regs;
6950
6951         t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg;
6952         t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg;
6953         t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg;
6954         t->clr_interrupt_reg = base + p->clr_interrupt_reg;
6955         t->sense_interrupt_reg = base + p->sense_interrupt_reg;
6956         t->ioarrin_reg = base + p->ioarrin_reg;
6957         t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg;
6958         t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg;
6959         t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg;
6960 }
6961
6962 /**
6963  * ipr_get_chip_cfg - Find adapter chip configuration
6964  * @dev_id:             PCI device id struct
6965  *
6966  * Return value:
6967  *      ptr to chip config on success / NULL on failure
6968  **/
6969 static const struct ipr_chip_cfg_t * __devinit
6970 ipr_get_chip_cfg(const struct pci_device_id *dev_id)
6971 {
6972         int i;
6973
6974         if (dev_id->driver_data)
6975                 return (const struct ipr_chip_cfg_t *)dev_id->driver_data;
6976
6977         for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
6978                 if (ipr_chip[i].vendor == dev_id->vendor &&
6979                     ipr_chip[i].device == dev_id->device)
6980                         return ipr_chip[i].cfg;
6981         return NULL;
6982 }
6983
6984 /**
6985  * ipr_probe_ioa - Allocates memory and does first stage of initialization
6986  * @pdev:               PCI device struct
6987  * @dev_id:             PCI device id struct
6988  *
6989  * Return value:
6990  *      0 on success / non-zero on failure
6991  **/
6992 static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
6993                                    const struct pci_device_id *dev_id)
6994 {
6995         struct ipr_ioa_cfg *ioa_cfg;
6996         struct Scsi_Host *host;
6997         unsigned long ipr_regs_pci;
6998         void __iomem *ipr_regs;
6999         int rc = PCIBIOS_SUCCESSFUL;
7000         volatile u32 mask, uproc;
7001
7002         ENTER;
7003
7004         if ((rc = pci_enable_device(pdev))) {
7005                 dev_err(&pdev->dev, "Cannot enable adapter\n");
7006                 goto out;
7007         }
7008
7009         dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
7010
7011         host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
7012
7013         if (!host) {
7014                 dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n");
7015                 rc = -ENOMEM;
7016                 goto out_disable;
7017         }
7018
7019         ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata;
7020         memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg));
7021         host->transportt = &ipr_transport_template;
7022         ata_host_init(&ioa_cfg->ata_host, &pdev->dev,
7023                       sata_port_info.flags, &ipr_sata_ops);
7024
7025         ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id);
7026
7027         if (!ioa_cfg->chip_cfg) {
7028                 dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
7029                         dev_id->vendor, dev_id->device);
7030                 goto out_scsi_host_put;
7031         }
7032
7033         ipr_regs_pci = pci_resource_start(pdev, 0);
7034
7035         rc = pci_request_regions(pdev, IPR_NAME);
7036         if (rc < 0) {
7037                 dev_err(&pdev->dev,
7038                         "Couldn't register memory range of registers\n");
7039                 goto out_scsi_host_put;
7040         }
7041
7042         ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0));
7043
7044         if (!ipr_regs) {
7045                 dev_err(&pdev->dev,
7046                         "Couldn't map memory range of registers\n");
7047                 rc = -ENOMEM;
7048                 goto out_release_regions;
7049         }
7050
7051         ioa_cfg->hdw_dma_regs = ipr_regs;
7052         ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci;
7053         ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs;
7054
7055         ipr_init_ioa_cfg(ioa_cfg, host, pdev);
7056
7057         pci_set_master(pdev);
7058
7059         rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
7060         if (rc < 0) {
7061                 dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
7062                 goto cleanup_nomem;
7063         }
7064
7065         rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
7066                                    ioa_cfg->chip_cfg->cache_line_size);
7067
7068         if (rc != PCIBIOS_SUCCESSFUL) {
7069                 dev_err(&pdev->dev, "Write of cache line size failed\n");
7070                 rc = -EIO;
7071                 goto cleanup_nomem;
7072         }
7073
7074         /* Save away PCI config space for use following IOA reset */
7075         rc = pci_save_state(pdev);
7076
7077         if (rc != PCIBIOS_SUCCESSFUL) {
7078                 dev_err(&pdev->dev, "Failed to save PCI config space\n");
7079                 rc = -EIO;
7080                 goto cleanup_nomem;
7081         }
7082
7083         if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg)))
7084                 goto cleanup_nomem;
7085
7086         if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg)))
7087                 goto cleanup_nomem;
7088
7089         rc = ipr_alloc_mem(ioa_cfg);
7090         if (rc < 0) {
7091                 dev_err(&pdev->dev,
7092                         "Couldn't allocate enough memory for device driver!\n");
7093                 goto cleanup_nomem;
7094         }
7095
7096         /*
7097          * If HRRQ updated interrupt is not masked, or reset alert is set,
7098          * the card is in an unknown state and needs a hard reset
7099          */
7100         mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
7101         uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
7102         if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
7103                 ioa_cfg->needs_hard_reset = 1;
7104
7105         ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
7106         rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
7107
7108         if (rc) {
7109                 dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
7110                         pdev->irq, rc);
7111                 goto cleanup_nolog;
7112         }
7113
7114         spin_lock(&ipr_driver_lock);
7115         list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
7116         spin_unlock(&ipr_driver_lock);
7117
7118         LEAVE;
7119 out:
7120         return rc;
7121
7122 cleanup_nolog:
7123         ipr_free_mem(ioa_cfg);
7124 cleanup_nomem:
7125         iounmap(ipr_regs);
7126 out_release_regions:
7127         pci_release_regions(pdev);
7128 out_scsi_host_put:
7129         scsi_host_put(host);
7130 out_disable:
7131         pci_disable_device(pdev);
7132         goto out;
7133 }
7134
7135 /**
7136  * ipr_scan_vsets - Scans for VSET devices
7137  * @ioa_cfg:    ioa config struct
7138  *
7139  * Description: Since the VSET resources do not follow SAM in that we can have
7140  * sparse LUNs with no LUN 0, we have to scan for these ourselves.
7141  *
7142  * Return value:
7143  *      none
7144  **/
7145 static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
7146 {
7147         int target, lun;
7148
7149         for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
7150                 for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ )
7151                         scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
7152 }
7153
7154 /**
7155  * ipr_initiate_ioa_bringdown - Bring down an adapter
7156  * @ioa_cfg:            ioa config struct
7157  * @shutdown_type:      shutdown type
7158  *
7159  * Description: This function will initiate bringing down the adapter.
7160  * This consists of issuing an IOA shutdown to the adapter
7161  * to flush the cache, and running BIST.
7162  * If the caller needs to wait on the completion of the reset,
7163  * the caller must sleep on the reset_wait_q.
7164  *
7165  * Return value:
7166  *      none
7167  **/
7168 static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg,
7169                                        enum ipr_shutdown_type shutdown_type)
7170 {
7171         ENTER;
7172         if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
7173                 ioa_cfg->sdt_state = ABORT_DUMP;
7174         ioa_cfg->reset_retries = 0;
7175         ioa_cfg->in_ioa_bringdown = 1;
7176         ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
7177         LEAVE;
7178 }
7179
7180 /**
7181  * __ipr_remove - Remove a single adapter
7182  * @pdev:       pci device struct
7183  *
7184  * Adapter hot plug remove entry point.
7185  *
7186  * Return value:
7187  *      none
7188  **/
7189 static void __ipr_remove(struct pci_dev *pdev)
7190 {
7191         unsigned long host_lock_flags = 0;
7192         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7193         ENTER;
7194
7195         spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
7196         ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
7197
7198         spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
7199         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
7200         flush_scheduled_work();
7201         spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
7202
7203         spin_lock(&ipr_driver_lock);
7204         list_del(&ioa_cfg->queue);
7205         spin_unlock(&ipr_driver_lock);
7206
7207         if (ioa_cfg->sdt_state == ABORT_DUMP)
7208                 ioa_cfg->sdt_state = WAIT_FOR_DUMP;
7209         spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
7210
7211         ipr_free_all_resources(ioa_cfg);
7212
7213         LEAVE;
7214 }
7215
7216 /**
7217  * ipr_remove - IOA hot plug remove entry point
7218  * @pdev:       pci device struct
7219  *
7220  * Adapter hot plug remove entry point.
7221  *
7222  * Return value:
7223  *      none
7224  **/
7225 static void ipr_remove(struct pci_dev *pdev)
7226 {
7227         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7228
7229         ENTER;
7230
7231         ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7232                               &ipr_trace_attr);
7233         ipr_remove_dump_file(&ioa_cfg->host->shost_classdev.kobj,
7234                              &ipr_dump_attr);
7235         scsi_remove_host(ioa_cfg->host);
7236
7237         __ipr_remove(pdev);
7238
7239         LEAVE;
7240 }
7241
7242 /**
7243  * ipr_probe - Adapter hot plug add entry point
7244  *
7245  * Return value:
7246  *      0 on success / non-zero on failure
7247  **/
7248 static int __devinit ipr_probe(struct pci_dev *pdev,
7249                                const struct pci_device_id *dev_id)
7250 {
7251         struct ipr_ioa_cfg *ioa_cfg;
7252         int rc;
7253
7254         rc = ipr_probe_ioa(pdev, dev_id);
7255
7256         if (rc)
7257                 return rc;
7258
7259         ioa_cfg = pci_get_drvdata(pdev);
7260         rc = ipr_probe_ioa_part2(ioa_cfg);
7261
7262         if (rc) {
7263                 __ipr_remove(pdev);
7264                 return rc;
7265         }
7266
7267         rc = scsi_add_host(ioa_cfg->host, &pdev->dev);
7268
7269         if (rc) {
7270                 __ipr_remove(pdev);
7271                 return rc;
7272         }
7273
7274         rc = ipr_create_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7275                                    &ipr_trace_attr);
7276
7277         if (rc) {
7278                 scsi_remove_host(ioa_cfg->host);
7279                 __ipr_remove(pdev);
7280                 return rc;
7281         }
7282
7283         rc = ipr_create_dump_file(&ioa_cfg->host->shost_classdev.kobj,
7284                                    &ipr_dump_attr);
7285
7286         if (rc) {
7287                 ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7288                                       &ipr_trace_attr);
7289                 scsi_remove_host(ioa_cfg->host);
7290                 __ipr_remove(pdev);
7291                 return rc;
7292         }
7293
7294         scsi_scan_host(ioa_cfg->host);
7295         ipr_scan_vsets(ioa_cfg);
7296         scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
7297         ioa_cfg->allow_ml_add_del = 1;
7298         ioa_cfg->host->max_channel = IPR_VSET_BUS;
7299         schedule_work(&ioa_cfg->work_q);
7300         return 0;
7301 }
7302
7303 /**
7304  * ipr_shutdown - Shutdown handler.
7305  * @pdev:       pci device struct
7306  *
7307  * This function is invoked upon system shutdown/reboot. It will issue
7308  * an adapter shutdown to the adapter to flush the write cache.
7309  *
7310  * Return value:
7311  *      none
7312  **/
7313 static void ipr_shutdown(struct pci_dev *pdev)
7314 {
7315         struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7316         unsigned long lock_flags = 0;
7317
7318         spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
7319         ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
7320         spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
7321         wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
7322 }
7323
7324 static struct pci_device_id ipr_pci_table[] __devinitdata = {
7325         { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7326                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702,
7327                 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7328         { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7329                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703,
7330               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7331         { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7332                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D,
7333               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7334         { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7335                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E,
7336               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7337         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7338                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B,
7339               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7340         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7341                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E,
7342               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7343         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7344                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A,
7345               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7346         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7347                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B,
7348                 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7349         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
7350               PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
7351               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7352         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
7353               PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
7354               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7355         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7356               PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
7357               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7358         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7359               PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
7360               0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7361         { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
7362                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780,
7363                 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7364         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
7365                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E,
7366                 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7367         { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
7368                 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F,
7369                 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7370         { }
7371 };
7372 MODULE_DEVICE_TABLE(pci, ipr_pci_table);
7373
7374 static struct pci_error_handlers ipr_err_handler = {
7375         .error_detected = ipr_pci_error_detected,
7376         .slot_reset = ipr_pci_slot_reset,
7377 };
7378
7379 static struct pci_driver ipr_driver = {
7380         .name = IPR_NAME,
7381         .id_table = ipr_pci_table,
7382         .probe = ipr_probe,
7383         .remove = ipr_remove,
7384         .shutdown = ipr_shutdown,
7385         .err_handler = &ipr_err_handler,
7386 };
7387
7388 /**
7389  * ipr_init - Module entry point
7390  *
7391  * Return value:
7392  *      0 on success / negative value on failure
7393  **/
7394 static int __init ipr_init(void)
7395 {
7396         ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
7397                  IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
7398
7399         return pci_register_driver(&ipr_driver);
7400 }
7401
7402 /**
7403  * ipr_exit - Module unload
7404  *
7405  * Module unload entry point.
7406  *
7407  * Return value:
7408  *      none
7409  **/
7410 static void __exit ipr_exit(void)
7411 {
7412         pci_unregister_driver(&ipr_driver);
7413 }
7414
7415 module_init(ipr_init);
7416 module_exit(ipr_exit);